user/sven/linux.git/security/device_cgroup.c, branch v5.7

device_cgroup: Cleanup cgroup eBPF device filter code

2020-04-13T18:41:54Z

Original cgroup v2 eBPF code for filtering device access made it possible to compile with CONFIG_CGROUP_DEVICE=n and still use the eBPF filtering. Change commit 4b7d4d453fc4 ("device_cgroup: Export devcgroup_check_permission") reverted this, making it required to set it to y. Since the device filtering (and all the docs) for cgroup v2 is no longer a "device controller" like it was in v1, someone might compile their kernel with CONFIG_CGROUP_DEVICE=n. Then (for linux 5.5+) the eBPF filter will not be invoked, and all processes will be allowed access to all devices, no matter what the eBPF filter says. Signed-off-by: Odin Ugedal Acked-by: Roman Gushchin Signed-off-by: Tejun Heo

device_cgroup: Export devcgroup_check_permission

2019-10-07T20:11:38Z

For AMD compute (amdkfd) driver. All AMD compute devices are exported via single device node /dev/kfd. As a result devices cannot be controlled individually using device cgroup. AMD compute devices will rely on its graphics counterpart that exposes /dev/dri/renderN node for each device. For each task (based on its cgroup), KFD driver will check if /dev/dri/renderN node is accessible before exposing it. Signed-off-by: Harish Kasiviswanathan Acked-by: Tejun Heo Acked-by: Felix Kuehling Reviewed-by: Roman Gushchin Signed-off-by: Alex Deucher

docs: cgroup-v1: add it to the admin-guide book

2019-07-15T14:03:02Z

Those files belong to the admin guide, so add them. Signed-off-by: Mauro Carvalho Chehab

docs: cgroup-v1: convert docs to ReST and rename to *.rst

2019-06-14T20:29:54Z

Convert the cgroup-v1 files to ReST format, in order to allow a later addition to the admin-guide. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab Acked-by: Tejun Heo Signed-off-by: Tejun Heo

device_cgroup: fix RCU imbalance in error case

2019-03-19T17:46:15Z

When dev_exception_add() returns an error (due to a failed memory allocation), make sure that we move the RCU preemption count back to where it was before we were called. We dropped the RCU read lock inside the loop body, so we can't just "break". sparse complains about this, too: $ make -s C=2 security/device_cgroup.o ./include/linux/rcupdate.h:647:9: warning: context imbalance in 'propagate_exception' - unexpected unlock Fixes: d591fb56618f ("device_cgroup: simplify cgroup tree walk in propagate_exception()") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn Acked-by: Michal Hocko Signed-off-by: Tejun Heo

docs: fix broken references with multiple hints

2018-06-15T21:10:01Z

The script: ./scripts/documentation-file-ref-check --fix Gives multiple hints for broken references on some files. Manually use the one that applies for some files. Acked-by: Steven Rostedt (VMware) Acked-by: James Morris Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet

device_cgroup: prepare code for bpf-based device controller

2017-11-05T14:26:51Z

This is non-functional change to prepare the device cgroup code for adding eBPF-based controller for cgroups v2. The patch performs the following changes: 1) __devcgroup_inode_permission() and devcgroup_inode_mknod() are moving to the device-cgroup.h and converting into static inline. 2) __devcgroup_check_permission() is exported. 3) devcgroup_check_permission() wrapper is introduced to be used by both existing and new bpf-based implementations. Signed-off-by: Roman Gushchin Acked-by: Tejun Heo Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller

device_cgroup: add DEVCG_ prefix to ACC_* and DEV_* constants

2017-11-05T14:26:51Z

Rename device type and access type constants defined in security/device_cgroup.c by adding the DEVCG_ prefix. The reason behind this renaming is to make them global namespace friendly, as they will be moved to the corresponding header file by following patches. Signed-off-by: Roman Gushchin Cc: David S. Miller Cc: Tejun Heo Cc: Alexei Starovoitov Cc: Daniel Borkmann Signed-off-by: David S. Miller

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

security/device_cgroup: Fix RCU_LOCKDEP_WARN() condition

2015-09-04T01:13:10Z

f78f5b90c4ff ("rcu: Rename rcu_lockdep_assert() to RCU_LOCKDEP_WARN()") introduced a bug by incorrectly inverting the condition when moving from rcu_lockdep_assert() to RCU_LOCKDEP_WARN(). This commit therefore fixes the inversion. Reported-by: Felipe Balbi Reported-by: Tejun Heo Signed-off-by: Paul E. McKenney Acked-by: Serge Hallyn Tested-by: Josh Boyer