user/sven/linux.git/security/keys, branch v3.18.131

KEYS: put keyring if install_session_keyring_to_cred() fails

2018-11-10T15:39:21Z

[ Upstream commit d636bd9f12a66ea3775c9fabbf3f8e118253467a ] In join_session_keyring(), if install_session_keyring_to_cred() were to fail, we would leak the keyring reference, just like in the bug fixed by commit 23567fd052a9 ("KEYS: Fix keyring ref leak in join_session_keyring()"). Fortunately this cannot happen currently, but we really should be more careful. Do this by adding and using a new error label at which the keyring reference is dropped. Signed-off-by: Eric Biggers Signed-off-by: David Howells Signed-off-by: James Morris Signed-off-by: Sasha Levin

KEYS: encrypted: fix buffer overread in valid_master_desc()

2018-02-16T19:14:42Z

commit 794b4bc292f5d31739d89c0202c54e7dc9bc3add upstream. With the 'encrypted' key type it was possible for userspace to provide a data blob ending with a master key description shorter than expected, e.g. 'keyctl add encrypted desc "new x" @s'. When validating such a master key description, validate_master_desc() could read beyond the end of the buffer. Fix this by using strncmp() instead of memcmp(). [Also clean up the code to deduplicate some logic.] Cc: Mimi Zohar Signed-off-by: Eric Biggers Signed-off-by: David Howells Signed-off-by: James Morris Signed-off-by: Jin Qian Signed-off-by: Greg Kroah-Hartman

KEYS: Don't permit request_key() to construct a new keyring

2017-12-20T09:01:28Z

commit 911b79cde95c7da0ec02f48105358a36636b7a71 upstream. If request_key() is used to find a keyring, only do the search part - don't do the construction part if the keyring was not found by the search. We don't really want keyrings in the negative instantiated state since the rejected/negative instantiation error value in the payload is unioned with keyring metadata. Now the kernel gives an error: request_key("keyring", "#selinux,bdekeyring", "keyring", KEY_SPEC_USER_SESSION_KEYRING) = -1 EPERM (Operation not permitted) Signed-off-by: David Howells Signed-off-by: Eric Biggers Signed-off-by: Greg Kroah-Hartman

Don't leak a key reference if request_key() tries to use a revoked keyring

2017-12-20T09:01:28Z

commit d0709f1e66e8066c4ac6a54620ec116aa41937c0 upstream. If a request_key() call to allocate and fill out a key attempts to insert the key structure into a revoked keyring, the key will leak, using memory and part of the user's key quota until the system reboots. This is from a failure of construct_alloc_key() to decrement the key's reference count after the attempt to insert into the requested keyring is rejected. key_put() needs to be called in the link_prealloc_failed callpath to ensure the unused key is released. Signed-off-by: David Jeffery Signed-off-by: David Howells Signed-off-by: James Morris Signed-off-by: Eric Biggers Signed-off-by: Greg Kroah-Hartman

KEYS: add missing permission check for request_key() destination

2017-12-16T09:32:26Z

commit 4dca6ea1d9432052afb06baf2e3ae78188a4410b upstream. When the request_key() syscall is not passed a destination keyring, it links the requested key (if constructed) into the "default" request-key keyring. This should require Write permission to the keyring. However, there is actually no permission check. This can be abused to add keys to any keyring to which only Search permission is granted. This is because Search permission allows joining the keyring. keyctl_set_reqkey_keyring(KEY_REQKEY_DEFL_SESSION_KEYRING) then will set the default request-key keyring to the session keyring. Then, request_key() can be used to add keys to the keyring. Both negatively and positively instantiated keys can be added using this method. Adding negative keys is trivial. Adding a positive key is a bit trickier. It requires that either /sbin/request-key positively instantiates the key, or that another thread adds the key to the process keyring at just the right time, such that request_key() misses it initially but then finds it in construct_alloc_key(). Fix this bug by checking for Write permission to the keyring in construct_get_dest_keyring() when the default keyring is being used. We don't do the permission check for non-default keyrings because that was already done by the earlier call to lookup_user_key(). Also, request_key_and_link() is currently passed a 'struct key *' rather than a key_ref_t, so the "possessed" bit is unavailable. We also don't do the permission check for the "requestor keyring", to continue to support the use case described by commit 8bbf4976b59f ("KEYS: Alter use of key instantiation link-to-keyring argument") where /sbin/request-key recursively calls request_key() to add keys to the original requestor's destination keyring. (I don't know of any users who actually do that, though...) Fixes: 3e30148c3d52 ("[PATCH] Keys: Make request-key create an authorisation key") Signed-off-by: Eric Biggers Signed-off-by: David Howells Signed-off-by: Greg Kroah-Hartman

security/keys: add CONFIG_KEYS_COMPAT to Kconfig

2017-11-18T10:06:31Z

commit 47b2c3fff4932e6fc17ce13d51a43c6969714e20 upstream. CONFIG_KEYS_COMPAT is defined in arch-specific Kconfigs and is missing for several 64-bit architectures : mips, parisc, tile. At the moment and for those architectures, calling in 32-bit userspace the keyctl syscall would return an ENOSYS error. This patch moves the CONFIG_KEYS_COMPAT option to security/keys/Kconfig, to make sure the compatibility wrapper is registered by default for any 64-bit architecture as long as it is configured with CONFIG_COMPAT. [DH: Modified to remove arm64 compat enablement also as requested by Eric Biggers] Signed-off-by: Bilal Amarni Signed-off-by: David Howells Reviewed-by: Arnd Bergmann cc: Eric Biggers Signed-off-by: James Morris Cc: James Cowgill Signed-off-by: Greg Kroah-Hartman

KEYS: trusted: fix writing past end of buffer in trusted_read()

2017-11-15T09:04:13Z

commit a3c812f7cfd80cf51e8f5b7034f7418f6beb56c1 upstream. When calling keyctl_read() on a key of type "trusted", if the user-supplied buffer was too small, the kernel ignored the buffer length and just wrote past the end of the buffer, potentially corrupting userspace memory. Fix it by instead returning the size required, as per the documentation for keyctl_read(). We also don't even fill the buffer at all in this case, as this is slightly easier to implement than doing a short read, and either behavior appears to be permitted. It also makes it match the behavior of the "encrypted" key type. Fixes: d00a1c72f7f4 ("keys: add new trusted key-type") Reported-by: Ben Hutchings Cc: # v2.6.38+ Signed-off-by: Eric Biggers Signed-off-by: David Howells Reviewed-by: Mimi Zohar Reviewed-by: James Morris Signed-off-by: James Morris Signed-off-by: Greg Kroah-Hartman

KEYS: trusted: sanitize all key material

2017-11-15T09:04:13Z

commit ee618b4619b72527aaed765f0f0b74072b281159 upstream. As the previous patch did for encrypted-keys, zero sensitive any potentially sensitive data related to the "trusted" key type before it is freed. Notably, we were not zeroing the tpm_buf structures in which the actual key is stored for TPM seal and unseal, nor were we zeroing the trusted_key_payload in certain error paths. Cc: Mimi Zohar Cc: David Safford Signed-off-by: Eric Biggers Signed-off-by: David Howells Signed-off-by: James Morris Signed-off-by: Greg Kroah-Hartman

KEYS: return full count in keyring_read() if buffer is too small

2017-11-08T09:03:48Z

commit 3239b6f29bdfb4b0a2ba59df995fc9e6f4df7f1f upstream. Commit e645016abc80 ("KEYS: fix writing past end of user-supplied buffer in keyring_read()") made keyring_read() stop corrupting userspace memory when the user-supplied buffer is too small. However it also made the return value in that case be the short buffer size rather than the size required, yet keyctl_read() is actually documented to return the size required. Therefore, switch it over to the documented behavior. Note that for now we continue to have it fill the short buffer, since it did that before (pre-v3.13) and dump_key_tree_aux() in keyutils arguably relies on it. Fixes: e645016abc80 ("KEYS: fix writing past end of user-supplied buffer in keyring_read()") Reported-by: Ben Hutchings Signed-off-by: Eric Biggers Signed-off-by: David Howells Reviewed-by: James Morris Signed-off-by: James Morris Signed-off-by: Greg Kroah-Hartman

KEYS: don't let add_key() update an uninstantiated key

2017-10-27T08:17:24Z

commit 60ff5b2f547af3828aebafd54daded44cfb0807a upstream. Currently, when passed a key that already exists, add_key() will call the key's ->update() method if such exists. But this is heavily broken in the case where the key is uninstantiated because it doesn't call __key_instantiate_and_link(). Consequently, it doesn't do most of the things that are supposed to happen when the key is instantiated, such as setting the instantiation state, clearing KEY_FLAG_USER_CONSTRUCT and awakening tasks waiting on it, and incrementing key->user->nikeys. It also never takes key_construction_mutex, which means that ->instantiate() can run concurrently with ->update() on the same key. In the case of the "user" and "logon" key types this causes a memory leak, at best. Maybe even worse, the ->update() methods of the "encrypted" and "trusted" key types actually just dereference a NULL pointer when passed an uninstantiated key. Change key_create_or_update() to wait interruptibly for the key to finish construction before continuing. This patch only affects *uninstantiated* keys. For now we still allow a negatively instantiated key to be updated (thereby positively instantiating it), although that's broken too (the next patch fixes it) and I'm not sure that anyone actually uses that functionality either. Here is a simple reproducer for the bug using the "encrypted" key type (requires CONFIG_ENCRYPTED_KEYS=y), though as noted above the bug pertained to more than just the "encrypted" key type: #include #include #include int main(void) { int ringid = keyctl_join_session_keyring(NULL); if (fork()) { for (;;) { const char payload[] = "update user:foo 32"; usleep(rand() % 10000); add_key("encrypted", "desc", payload, sizeof(payload), ringid); keyctl_clear(ringid); } } else { for (;;) request_key("encrypted", "desc", "callout_info", ringid); } } It causes: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: encrypted_update+0xb0/0x170 PGD 7a178067 P4D 7a178067 PUD 77269067 PMD 0 PREEMPT SMP CPU: 0 PID: 340 Comm: reproduce Tainted: G D 4.14.0-rc1-00025-g428490e38b2e #796 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff8a467a39a340 task.stack: ffffb15c40770000 RIP: 0010:encrypted_update+0xb0/0x170 RSP: 0018:ffffb15c40773de8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8a467a275b00 RCX: 0000000000000000 RDX: 0000000000000005 RSI: ffff8a467a275b14 RDI: ffffffffb742f303 RBP: ffffb15c40773e20 R08: 0000000000000000 R09: ffff8a467a275b17 R10: 0000000000000020 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8a4677057180 R15: ffff8a467a275b0f FS: 00007f5d7fb08700(0000) GS:ffff8a467f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 0000000077262005 CR4: 00000000001606f0 Call Trace: key_create_or_update+0x2bc/0x460 SyS_add_key+0x10c/0x1d0 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x7f5d7f211259 RSP: 002b:00007ffed03904c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000f8 RAX: ffffffffffffffda RBX: 000000003b2a7955 RCX: 00007f5d7f211259 RDX: 00000000004009e4 RSI: 00000000004009ff RDI: 0000000000400a04 RBP: 0000000068db8bad R08: 000000003b2a7955 R09: 0000000000000004 R10: 000000000000001a R11: 0000000000000246 R12: 0000000000400868 R13: 00007ffed03905d0 R14: 0000000000000000 R15: 0000000000000000 Code: 77 28 e8 64 34 1f 00 45 31 c0 31 c9 48 8d 55 c8 48 89 df 48 8d 75 d0 e8 ff f9 ff ff 85 c0 41 89 c4 0f 88 84 00 00 00 4c 8b 7d c8 <49> 8b 75 18 4c 89 ff e8 24 f8 ff ff 85 c0 41 89 c4 78 6d 49 8b RIP: encrypted_update+0xb0/0x170 RSP: ffffb15c40773de8 CR2: 0000000000000018 Reported-by: Eric Biggers Signed-off-by: David Howells cc: Eric Biggers Signed-off-by: Greg Kroah-Hartman