user/sven/linux.git/security/keys, branch v6.1.18

use less confusing names for iov_iter direction initializers

2023-02-09T10:28:04Z

[ Upstream commit de4eda9de2d957ef2d6a8365a01e26a435e958cb ] READ/WRITE proved to be actively confusing - the meanings are "data destination, as used with read(2)" and "data source, as used with write(2)", but people keep interpreting those as "we read data from it" and "we write data to it", i.e. exactly the wrong way. Call them ITER_DEST and ITER_SOURCE - at least that is harder to misinterpret... Signed-off-by: Al Viro Stable-dep-of: 6dd88fd59da8 ("vhost-scsi: unbreak any layout for response") Signed-off-by: Sasha Levin

KEYS: encrypted: fix key instantiation with user-provided data

2022-12-21T16:48:11Z

commit 5adedd42245af0860ebda8fe0949f24f5204c1b1 upstream. Commit cd3bc044af48 ("KEYS: encrypted: Instantiate key with user-provided decrypted data") added key instantiation with user provided decrypted data. The user data is hex-ascii-encoded but was just memcpy'ed to the binary buffer. Fix this to use hex2bin instead. Old keys created from user provided decrypted data saved with "keyctl pipe" are still valid, however if the key is recreated from decrypted data the old key must be converted to the correct format. This can be done with a small shell script, e.g.: BROKENKEY=abcdefABCDEF1234567890aaaaaaaaaa NEWKEY=$(echo -ne $BROKENKEY | xxd -p -c32) keyctl add user masterkey "$(cat masterkey.bin)" @u keyctl add encrypted testkey "new user:masterkey 32 $NEWKEY" @u However, NEWKEY is still broken: If for BROKENKEY 32 bytes were specified, a brute force attacker knowing the key properties would only need to try at most 2^(16*8) keys, as if the key was only 16 bytes long. The security issue is a result of the combination of limiting the input range to hex-ascii and using memcpy() instead of hex2bin(). It could have been fixed either by allowing binary input or using hex2bin() (and doubling the ascii input key length). This patch implements the latter. The corresponding test for the Linux Test Project ltp has also been fixed (see link below). Fixes: cd3bc044af48 ("KEYS: encrypted: Instantiate key with user-provided decrypted data") Cc: stable@kernel.org Link: https://lore.kernel.org/ltp/20221006081709.92303897@mail.steuer-voss.de/ Reviewed-by: Mimi Zohar Signed-off-by: Nikolaus Voss Signed-off-by: Mimi Zohar Signed-off-by: Greg Kroah-Hartman

Merge tag 'tpmdd-next-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

2022-10-10T20:09:33Z

Pull tpm updates from Jarkko Sakkinen: "Just a few bug fixes this time" * tag 'tpmdd-next-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: selftest: tpm2: Add Client.__del__() to close /dev/tpm* handle security/keys: Remove inconsistent __user annotation char: move from strlcpy with unused retval to strscpy

security/keys: Remove inconsistent __user annotation

2022-10-04T21:25:56Z

The declaration of keyring_read does not match the definition (security/keys/keyring.c). In this case the definition is correct because it matches what defined in "struct key_type::read" (linux/key-type.h). Fix the declaration removing the inconsistent __user annotation. Cc: David Howells Cc: Jarkko Sakkinen Cc: Paul Moore Cc: James Morris Signed-off-by: Vincenzo Frascino Reviewed-by: Paul Moore Acked-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

KEYS: Move KEY_LOOKUP_ to include/linux/key.h and define KEY_LOOKUP_ALL

2022-09-22T00:32:48Z

In preparation for the patch that introduces the bpf_lookup_user_key() eBPF kfunc, move KEY_LOOKUP_ definitions to include/linux/key.h, to be able to validate the kfunc parameters. Add them to enum key_lookup_flag, so that all the current ones and the ones defined in the future are automatically exported through BTF and available to eBPF programs. Also, add KEY_LOOKUP_ALL to the enum, with the logical OR of currently defined flags as value, to facilitate checking whether a variable contains only those flags. Signed-off-by: Roberto Sassu Acked-by: Jarkko Sakkinen Link: https://lore.kernel.org/r/20220920075951.929132-7-roberto.sassu@huaweicloud.com Signed-off-by: Alexei Starovoitov

KEYS: trusted: tpm2: Fix migratable logic

2022-06-08T11:12:13Z

When creating (sealing) a new trusted key, migratable trusted keys have the FIXED_TPM and FIXED_PARENT attributes set, and non-migratable keys don't. This is backwards, and also causes creation to fail when creating a migratable key under a migratable parent. (The TPM thinks you are trying to seal a non-migratable blob under a migratable parent.) The following simple patch fixes the logic, and has been tested for all four combinations of migratable and non-migratable trusted keys and parent storage keys. With this logic, you will get a proper failure if you try to create a non-migratable trusted key under a migratable parent storage key, and all other combinations work correctly. Cc: stable@vger.kernel.org # v5.13+ Fixes: e5fb5d2c5a03 ("security: keys: trusted: Make sealed key properly interoperable") Signed-off-by: David Safford Reviewed-by: Ahmad Fatoum Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

Merge tag 'tpmdd-next-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

2022-05-24T20:16:50Z

Pull tpm updates from Jarkko Sakkinen: - Tightened validation of key hashes for SYSTEM_BLACKLIST_HASH_LIST. An invalid hash format causes a compilation error. Previously, they got included to the kernel binary but were silently ignored at run-time. - Allow root user to append new hashes to the blacklist keyring. - Trusted keys backed with Cryptographic Acceleration and Assurance Module (CAAM), which part of some of the new NXP's SoC's. Now there is total three hardware backends for trusted keys: TPM, ARM TEE and CAAM. - A scattered set of fixes and small improvements for the TPM driver. * tag 'tpmdd-next-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: MAINTAINERS: add KEYS-TRUSTED-CAAM doc: trusted-encrypted: describe new CAAM trust source KEYS: trusted: Introduce support for NXP CAAM-based trusted keys crypto: caam - add in-kernel interface for blob generator crypto: caam - determine whether CAAM supports blob encap/decap KEYS: trusted: allow use of kernel RNG for key material KEYS: trusted: allow use of TEE as backend without TCG_TPM support tpm: Add field upgrade mode support for Infineon TPM2 modules tpm: Fix buffer access in tpm2_get_tpm_pt() char: tpm: cr50_i2c: Suppress duplicated error message in .remove() tpm: cr50: Add new device/vendor ID 0x504a6666 tpm: Remove read16/read32/write32 calls from tpm_tis_phy_ops tpm: ibmvtpm: Correct the return value in tpm_ibmvtpm_probe() tpm/tpm_ftpm_tee: Return true/false (not 1/0) from bool functions certs: Explain the rationale to call panic() certs: Allow root user to append signed hashes to the blacklist keyring certs: Check that builtin blacklist hashes are valid certs: Make blacklist_vet_description() more strict certs: Factor out the blacklist hash creation tools/certs: Add print-cert-tbs-hash.sh

KEYS: trusted: Introduce support for NXP CAAM-based trusted keys

2022-05-23T15:47:50Z

The Cryptographic Acceleration and Assurance Module (CAAM) is an IP core built into many newer i.MX and QorIQ SoCs by NXP. The CAAM does crypto acceleration, hardware number generation and has a blob mechanism for encapsulation/decapsulation of sensitive material. This blob mechanism depends on a device specific random 256-bit One Time Programmable Master Key that is fused in each SoC at manufacturing time. This key is unreadable and can only be used by the CAAM for AES encryption/decryption of user data. This makes it a suitable backend (source) for kernel trusted keys. Previous commits generalized trusted keys to support multiple backends and added an API to access the CAAM blob mechanism. Based on these, provide the necessary glue to use the CAAM for trusted keys. Reviewed-by: David Gstir Reviewed-by: Pankaj Gupta Reviewed-by: Jarkko Sakkinen Tested-by: Tim Harvey Tested-by: Matthias Schiffer Tested-by: Pankaj Gupta Tested-by: Michael Walle # on ls1028a (non-E and E) Tested-by: John Ernberg # iMX8QXP Signed-off-by: Ahmad Fatoum Signed-off-by: Jarkko Sakkinen

KEYS: trusted: allow use of kernel RNG for key material

2022-05-23T15:47:50Z

The two existing trusted key sources don't make use of the kernel RNG, but instead let the hardware doing the sealing/unsealing also generate the random key material. However, both users and future backends may want to place less trust into the quality of the trust source's random number generator and instead reuse the kernel entropy pool, which can be seeded from multiple entropy sources. Make this possible by adding a new trusted.rng parameter, that will force use of the kernel RNG. In its absence, it's up to the trust source to decide, which random numbers to use, maintaining the existing behavior. Suggested-by: Jarkko Sakkinen Acked-by: Sumit Garg Acked-by: Pankaj Gupta Reviewed-by: David Gstir Reviewed-by: Pankaj Gupta Reviewed-by: Jarkko Sakkinen Tested-by: Pankaj Gupta Tested-by: Michael Walle # on ls1028a (non-E and E) Tested-by: John Ernberg # iMX8QXP Signed-off-by: Ahmad Fatoum Signed-off-by: Jarkko Sakkinen

KEYS: trusted: allow use of TEE as backend without TCG_TPM support

2022-05-23T15:47:50Z

With recent rework, trusted keys are no longer limited to TPM as trust source. The Kconfig symbol is unchanged however leading to a few issues: - TCG_TPM is required, even if only TEE is to be used - Enabling TCG_TPM, but excluding it from available trusted sources is not possible - TEE=m && TRUSTED_KEYS=y will lead to TEE support being silently dropped, which is not the best user experience Remedy these issues by introducing two new boolean Kconfig symbols: TRUSTED_KEYS_TPM and TRUSTED_KEYS_TEE with the appropriate dependencies. Any new code depending on the TPM trusted key backend in particular or symbols exported by it will now need to explicitly state that it depends on TRUSTED_KEYS && TRUSTED_KEYS_TPM The latter to ensure the dependency is built and the former to ensure it's reachable for module builds. There are no such users yet. Reviewed-by: Sumit Garg Reviewed-by: Jarkko Sakkinen Reviewed-by: Pankaj Gupta Tested-by: Pankaj Gupta Tested-by: Andreas Rammhold Tested-by: Tim Harvey Tested-by: Michael Walle # on ls1028a (non-E and E) Tested-by: John Ernberg # iMX8QXP Signed-off-by: Ahmad Fatoum Signed-off-by: Jarkko Sakkinen