user/sven/linux.git/security/security.c, branch v5.10.138

lsm,selinux: pass flowi_common instead of flowi to the LSM hooks

2022-06-09T08:21:09Z

[ Upstream commit 3df98d79215ace13d1e91ddfc5a67a0f5acbd83f ] As pointed out by Herbert in a recent related patch, the LSM hooks do not have the necessary address family information to use the flowi struct safely. As none of the LSMs currently use any of the protocol specific flowi information, replace the flowi pointers with pointers to the address family independent flowi_common struct. Reported-by: Herbert Xu Acked-by: James Morris Signed-off-by: Paul Moore Signed-off-by: Sasha Levin

lockdown: also lock down previous kgdb use

2022-05-30T07:33:22Z

commit eadb2f47a3ced5c64b23b90fd2a3463f63726066 upstream. KGDB and KDB allow read and write access to kernel memory, and thus should be restricted during lockdown. An attacker with access to a serial port (for example, via a hypervisor console, which some cloud vendors provide over the network) could trigger the debugger so it is important that the debugger respect the lockdown mode when/if it is triggered. Fix this by integrating lockdown into kdb's existing permissions mechanism. Unfortunately kgdb does not have any permissions mechanism (although it certainly could be added later) so, for now, kgdb is simply and brutally disabled by immediately exiting the gdb stub without taking any action. For lockdowns established early in the boot (e.g. the normal case) then this should be fine but on systems where kgdb has set breakpoints before the lockdown is enacted than "bad things" will happen. CVE: CVE-2022-21499 Co-developed-by: Stephen Brennan Signed-off-by: Stephen Brennan Reviewed-by: Douglas Anderson Signed-off-by: Daniel Thompson Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

LSM: general protection fault in legacy_parse_param

2022-04-08T12:40:30Z

[ Upstream commit ecff30575b5ad0eda149aadad247b7f75411fd47 ] The usual LSM hook "bail on fail" scheme doesn't work for cases where a security module may return an error code indicating that it does not recognize an input. In this particular case Smack sees a mount option that it recognizes, and returns 0. A call to a BPF hook follows, which returns -ENOPARAM, which confuses the caller because Smack has processed its data. The SELinux hook incorrectly returns 1 on success. There was a time when this was correct, however the current expectation is that it return 0 on success. This is repaired. Reported-by: syzbot+d1e3b1d92d25abf97943@syzkaller.appspotmail.com Signed-off-by: Casey Schaufler Acked-by: James Morris Signed-off-by: Paul Moore Signed-off-by: Sasha Levin

binder: use cred instead of task for selinux checks

2021-11-18T13:03:36Z

commit 52f88693378a58094c538662ba652aff0253c4fe upstream. Since binder was integrated with selinux, it has passed 'struct task_struct' associated with the binder_proc to represent the source and target of transactions. The conversion of task to SID was then done in the hook implementations. It turns out that there are race conditions which can result in an incorrect security context being used. Fix by using the 'struct cred' saved during binder_open and pass it to the selinux subsystem. Cc: stable@vger.kernel.org # 5.14 (need backport for earlier stables) Fixes: 79af73079d75 ("Add security hooks to binder and implement the hooks for SELinux.") Suggested-by: Jann Horn Signed-off-by: Todd Kjos Acked-by: Casey Schaufler Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman

bpf: Add lockdown check for probe_write_user helper

2021-08-15T12:00:25Z

commit 51e1bb9eeaf7868db56e58f47848e364ab4c4129 upstream. Back then, commit 96ae52279594 ("bpf: Add bpf_probe_write_user BPF helper to be called in tracers") added the bpf_probe_write_user() helper in order to allow to override user space memory. Its original goal was to have a facility to "debug, divert, and manipulate execution of semi-cooperative processes" under CAP_SYS_ADMIN. Write to kernel was explicitly disallowed since it would otherwise tamper with its integrity. One use case was shown in cf9b1199de27 ("samples/bpf: Add test/example of using bpf_probe_write_user bpf helper") where the program DNATs traffic at the time of connect(2) syscall, meaning, it rewrites the arguments to a syscall while they're still in userspace, and before the syscall has a chance to copy the argument into kernel space. These days we have better mechanisms in BPF for achieving the same (e.g. for load-balancers), but without having to write to userspace memory. Of course the bpf_probe_write_user() helper can also be used to abuse many other things for both good or bad purpose. Outside of BPF, there is a similar mechanism for ptrace(2) such as PTRACE_PEEK{TEXT,DATA} and PTRACE_POKE{TEXT,DATA}, but would likely require some more effort. Commit 96ae52279594 explicitly dedicated the helper for experimentation purpose only. Thus, move the helper's availability behind a newly added LOCKDOWN_BPF_WRITE_USER lockdown knob so that the helper is disabled under the "integrity" mode. More fine-grained control can be implemented also from LSM side with this change. Fixes: 96ae52279594 ("bpf: Add bpf_probe_write_user BPF helper to be called in tracers") Signed-off-by: Daniel Borkmann Acked-by: Andrii Nakryiko Signed-off-by: Greg Kroah-Hartman

LSM: Add "contents" flag to kernel_read_file hook

2020-10-05T11:37:03Z

As with the kernel_load_data LSM hook, add a "contents" flag to the kernel_read_file LSM hook that indicates whether the LSM can expect a matching call to the kernel_post_read_file LSM hook with the full contents of the file. With the coming addition of partial file read support for kernel_read_file*() API, the LSM will no longer be able to always see the entire contents of a file during the read calls. For cases where the LSM must read examine the complete file contents, it will need to do so on its own every time the kernel_read_file hook is called with contents=false (or reject such cases). Adjust all existing LSMs to retain existing behavior. Signed-off-by: Kees Cook Reviewed-by: Mimi Zohar Link: https://lore.kernel.org/r/20201002173828.2099543-12-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman

LSM: Introduce kernel_post_load_data() hook

2020-10-05T11:37:03Z

There are a few places in the kernel where LSMs would like to have visibility into the contents of a kernel buffer that has been loaded or read. While security_kernel_post_read_file() (which includes the buffer) exists as a pairing for security_kernel_read_file(), no such hook exists to pair with security_kernel_load_data(). Earlier proposals for just using security_kernel_post_read_file() with a NULL file argument were rejected (i.e. "file" should always be valid for the security_..._file hooks, but it appears at least one case was left in the kernel during earlier refactoring. (This will be fixed in a subsequent patch.) Since not all cases of security_kernel_load_data() can have a single contiguous buffer made available to the LSM hook (e.g. kexec image segments are separately loaded), there needs to be a way for the LSM to reason about its expectations of the hook coverage. In order to handle this, add a "contents" argument to the "kernel_load_data" hook that indicates if the newly added "kernel_post_load_data" hook will be called with the full contents once loaded. That way, LSMs requiring full contents can choose to unilaterally reject "kernel_load_data" with contents=false (which is effectively the existing hook coverage), but when contents=true they can allow it and later evaluate the "kernel_post_load_data" hook once the buffer is loaded. With this change, LSMs can gain coverage over non-file-backed data loads (e.g. init_module(2) and firmware userspace helper), which will happen in subsequent patches. Additionally prepare IMA to start processing these cases. Signed-off-by: Kees Cook Reviewed-by: KP Singh Link: https://lore.kernel.org/r/20201002173828.2099543-9-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman

fs/kernel_read_file: Split into separate include file

2020-10-05T11:34:18Z

Move kernel_read_file* out of linux/fs.h to its own linux/kernel_read_file.h include file. That header gets pulled in just about everywhere and doesn't really need functions not related to the general fs interface. Suggested-by: Christoph Hellwig Signed-off-by: Scott Branden Signed-off-by: Kees Cook Reviewed-by: Christoph Hellwig Reviewed-by: Mimi Zohar Reviewed-by: Luis Chamberlain Acked-by: Greg Kroah-Hartman Acked-by: James Morris Link: https://lore.kernel.org/r/20200706232309.12010-2-scott.branden@broadcom.com Link: https://lore.kernel.org/r/20201002173828.2099543-4-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman

security: Fix hook iteration and default value for inode_copy_up_xattr

2020-06-23T23:39:23Z

inode_copy_up_xattr returns 0 to indicate the acceptance of the xattr and 1 to reject it. If the LSM does not know about the xattr, it's expected to return -EOPNOTSUPP, which is the correct default value for this hook. BPF LSM, currently, uses 0 as the default value and thereby falsely allows all overlay fs xattributes to be copied up. The iteration logic is also updated from the "bail-on-fail" call_int_hook to continue on the non-decisive -EOPNOTSUPP and bail out on other values. Fixes: 98e828a0650f ("security: Refactor declaration of LSM hooks") Signed-off-by: KP Singh Signed-off-by: James Morris

Merge tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux

2020-06-14T18:39:31Z

Pull SafeSetID update from Micah Morton: "Add additional LSM hooks for SafeSetID SafeSetID is capable of making allow/deny decisions for set*uid calls on a system, and we want to add similar functionality for set*gid calls. The work to do that is not yet complete, so probably won't make it in for v5.8, but we are looking to get this simple patch in for v5.8 since we have it ready. We are planning on the rest of the work for extending the SafeSetID LSM being merged during the v5.9 merge window" * tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux: security: Add LSM hooks to set*gid syscalls