user/sven/linux.git/security, branch v6.6.115

KEYS: trusted_tpm1: Compare HMAC values in constant time

2025-10-19T14:30:50Z

commit eed0e3d305530066b4fc5370107cff8ef1a0d229 upstream. To prevent timing attacks, HMAC value comparison needs to be constant time. Replace the memcmp() with the correct function, crypto_memneq(). [For the Fixes commit I used the commit that introduced the memcmp(). It predates the introduction of crypto_memneq(), but it was still a bug at the time even though a helper function didn't exist yet.] Fixes: d00a1c72f7f4 ("keys: add new trusted key-type") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

ima: limit the number of ToMToU integrity violations

2025-09-19T14:32:01Z

[ Upstream commit a414016218ca97140171aa3bb926b02e1f68c2cc ] Each time a file in policy, that is already opened for read, is opened for write, a Time-of-Measure-Time-of-Use (ToMToU) integrity violation audit message is emitted and a violation record is added to the IMA measurement list. This occurs even if a ToMToU violation has already been recorded. Limit the number of ToMToU integrity violations per file open for read. Note: The IMA_MAY_EMIT_TOMTOU atomic flag must be set from the reader side based on policy. This may result in a per file open for read ToMToU violation. Since IMA_MUST_MEASURE is only used for violations, rename the atomic IMA_MUST_MEASURE flag to IMA_MAY_EMIT_TOMTOU. Cc: stable@vger.kernel.org # applies cleanly up to linux-6.6 Tested-by: Stefan Berger Reviewed-by: Petr Vorel Tested-by: Petr Vorel Reviewed-by: Roberto Sassu Signed-off-by: Mimi Zohar [ adapted IMA flag definitions location from ima.h to integrity.h ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

apparmor: use the condition in AA_BUG_FMT even with debug disabled

2025-08-28T14:28:28Z

[ Upstream commit 67e370aa7f968f6a4f3573ed61a77b36d1b26475 ] This follows the established practice and fixes a build failure for me: security/apparmor/file.c: In function ‘__file_sock_perm’: security/apparmor/file.c:544:24: error: unused variable ‘sock’ [-Werror=unused-variable] 544 | struct socket *sock = (struct socket *) file->private_data; | ^~~~ Signed-off-by: Mateusz Guzik Signed-off-by: John Johansen Signed-off-by: Sasha Levin

apparmor: shift ouid when mediating hard links in userns

2025-08-28T14:28:28Z

[ Upstream commit c5bf96d20fd787e4909b755de4705d52f3458836 ] When using AppArmor profiles inside an unprivileged container, the link operation observes an unshifted ouid. (tested with LXD and Incus) For example, root inside container and uid 1000000 outside, with `owner /root/link l,` profile entry for ln: /root$ touch chain && ln chain link ==> dmesg apparmor="DENIED" operation="link" class="file" namespace="root//lxd-feet_" profile="linkit" name="/root/link" pid=1655 comm="ln" requested_mask="l" denied_mask="l" fsuid=1000000 ouid=0 [<== should be 1000000] target="/root/chain" Fix by mapping inode uid of old_dentry in aa_path_link() rather than using it directly, similarly to how it's mapped in __file_path_perm() later in the file. Signed-off-by: Gabriel Totev Signed-off-by: John Johansen Signed-off-by: Sasha Levin

securityfs: don't pin dentries twice, once is enough...

2025-08-28T14:28:15Z

[ Upstream commit 27cd1bf1240d482e4f02ca4f9812e748f3106e4f ] incidentally, securityfs_recursive_remove() is broken without that - it leaks dentries, since simple_recursive_removal() does not expect anything of that sort. It could be worked around by dput() in remove_one() callback, but it's easier to just drop that double-get stuff. Signed-off-by: Al Viro Signed-off-by: Sasha Levin

apparmor: fix loop detection used in conflicting attachment resolution

2025-08-15T10:08:57Z

[ Upstream commit a88db916b8c77552f49f7d9f8744095ea01a268f ] Conflicting attachment resolution is based on the number of states traversed to reach an accepting state in the attachment DFA, accounting for DFA loops traversed during the matching process. However, the loop counting logic had multiple bugs: - The inc_wb_pos macro increments both position and length, but length is supposed to saturate upon hitting buffer capacity, instead of wrapping around. - If no revisited state is found when traversing the history, is_loop would still return true, as if there was a loop found the length of the history buffer, instead of returning false and signalling that no loop was found. As a result, the adjustment step of aa_dfa_leftmatch would sometimes produce negative counts with loop- free DFAs that traversed enough states. - The iteration in the is_loop for loop is supposed to stop before i = wb->len, so the conditional should be < instead of <=. This patch fixes the above bugs as well as the following nits: - The count and size fields in struct match_workbuf were not used, so they can be removed. - The history buffer in match_workbuf semantically stores aa_state_t and not unsigned ints, even if aa_state_t is currently unsigned int. - The local variables in is_loop are counters, and thus should be unsigned ints instead of aa_state_t's. Fixes: 21f606610502 ("apparmor: improve overlapping domain attachment resolution") Signed-off-by: Ryan Lee Co-developed-by: John Johansen Signed-off-by: John Johansen Signed-off-by: Sasha Levin

apparmor: ensure WB_HISTORY_SIZE value is a power of 2

2025-08-15T10:08:57Z

[ Upstream commit 6c055e62560b958354625604293652753d82bcae ] WB_HISTORY_SIZE was defined to be a value not a power of 2, despite a comment in the declaration of struct match_workbuf stating it is and a modular arithmetic usage in the inc_wb_pos macro assuming that it is. Bump WB_HISTORY_SIZE's value up to 32 and add a BUILD_BUG_ON_NOT_POWER_OF_2 line to ensure that any future changes to the value of WB_HISTORY_SIZE respect this requirement. Fixes: 136db994852a ("apparmor: increase left match history buffer size") Signed-off-by: Ryan Lee Signed-off-by: John Johansen Signed-off-by: Sasha Levin

selinux: fix selinux_xfrm_alloc_user() to set correct ctx_len

2025-06-27T10:08:59Z

commit 86c8db86af43f52f682e53a0f2f0828683be1e52 upstream. We should count the terminating NUL byte as part of the ctx_len. Otherwise, UBSAN logs a warning: UBSAN: array-index-out-of-bounds in security/selinux/xfrm.c:99:14 index 60 is out of range for type 'char [*]' The allocation itself is correct so there is no actual out of bounds indexing, just a warning. Cc: stable@vger.kernel.org Suggested-by: Christian Göttsche Link: https://lore.kernel.org/selinux/CAEjxPJ6tA5+LxsGfOJokzdPeRomBHjKLBVR6zbrg+_w3ZZbM3A@mail.gmail.com/ Signed-off-by: Stephen Smalley Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman

smack: Revert "smackfs: Added check catlen"

2025-06-04T12:42:09Z

[ Upstream commit c7fb50cecff9cad19fdac5b37337eae4e42b94c7 ] This reverts commit ccfd889acb06eab10b98deb4b5eef0ec74157ea0 The indicated commit * does not describe the problem that change tries to solve * has programming issues * introduces a bug: forever clears NETLBL_SECATTR_MLS_CAT in (struct smack_known *)skp->smk_netlabel.flags Reverting the commit to reapproach original problem Signed-off-by: Konstantin Andreev Signed-off-by: Casey Schaufler Signed-off-by: Sasha Levin

smack: recognize ipv4 CIPSO w/o categories

2025-06-04T12:42:09Z

[ Upstream commit a158a937d864d0034fea14913c1f09c6d5f574b8 ] If SMACK label has CIPSO representation w/o categories, e.g.: | # cat /smack/cipso2 | foo 10 | @ 250/2 | ... then SMACK does not recognize such CIPSO in input ipv4 packets and substitues '*' label instead. Audit records may look like | lsm=SMACK fn=smack_socket_sock_rcv_skb action=denied | subject="*" object="_" requested=w pid=0 comm="swapper/1" ... This happens in two steps: 1) security/smack/smackfs.c`smk_set_cipso does not clear NETLBL_SECATTR_MLS_CAT from (struct smack_known *)skp->smk_netlabel.flags on assigning CIPSO w/o categories: | rcu_assign_pointer(skp->smk_netlabel.attr.mls.cat, ncats.attr.mls.cat); | skp->smk_netlabel.attr.mls.lvl = ncats.attr.mls.lvl; 2) security/smack/smack_lsm.c`smack_from_secattr can not match skp->smk_netlabel with input packet's struct netlbl_lsm_secattr *sap because sap->flags have not NETLBL_SECATTR_MLS_CAT (what is correct) but skp->smk_netlabel.flags have (what is incorrect): | if ((sap->flags & NETLBL_SECATTR_MLS_CAT) == 0) { | if ((skp->smk_netlabel.flags & | NETLBL_SECATTR_MLS_CAT) == 0) | found = 1; | break; | } This commit sets/clears NETLBL_SECATTR_MLS_CAT in skp->smk_netlabel.flags according to the presense of CIPSO categories. The update of smk_netlabel is not atomic, so input packets processing still may be incorrect during short time while update proceeds. Signed-off-by: Konstantin Andreev Signed-off-by: Casey Schaufler Signed-off-by: Sasha Levin