user/sven/linux.git/tools/Makefile, branch v4.14.26

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge tag 'spi-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

2017-09-05T18:40:38Z

Pull spi updates from Mark Brown: "A fairly quiet release for the SPI subsystem: - Move to using IDR for allocating bus numbers - Modernisation of the ep93xx driver, removing a lot of open coding and using the framework more - The tools have been moved to use the standard tools build system and an install target added (there will be a fairly trivial conflict with tip resulting from the changes in the main tools Makefile) - A refactoring of the Qualcomm QUP driver which enables new variants to be supported - Explicit support for the Freescale i.MX53 and i.MX6 SPI, Renesas R-Car H3 and Rockchip RV1108 controllers" * tag 'spi-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (71 commits) spi: spi-falcon: drop check of boot select spi: imx: fix use of native chip-selects with devicetree spi: pl022: constify amba_id spi: imx: fix little-endian build spi: omap: Allocate bus number from spi framework spi: Kernel coding style fixes spi: imx: dynamic burst length adjust for PIO mode spi: Pick spi bus number from Linux idr or spi alias spi: rockchip: configure CTRLR1 according to size and data frame spi: altera: Consolidate TX/RX data register access spi: altera: Switch to SPI core transfer queue management spi: rockchip: add compatible string for rv1108 spi spi: qup: fix 64-bit build warning spi: qup: hide warning for uninitialized variable spi: spi-ep93xx: use the default master transfer queueing mechanism spi: spi-ep93xx: remove private data 'current_msg' spi: spi-ep93xx: pass the spi_master pointer around spi: spi-ep93xx: absorb the interrupt enable/disable helpers spi: spi-ep93xx: add spi master prepare_transfer_hardware() spi: spi-ep93xx: use 32-bit read/write for all registers ...

Merge tag 'staging-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2017-09-05T17:36:26Z

Pull staging/IIO driver updates from Greg KH: "Here is the big staging and IIO driver update for 4.14-rc1. Lots of staging driver fixes and cleanups, including some reorginizing of the lustre header files to try to impose some sanity on what is, and what is not, the uapi for that filesystem. There are some tty core changes in here as well, as the speakup drivers need them, and that's ok with me, they are sane and the speakup code is getting nicer because of it. There is also the addition of the obiligatory new wifi driver, just because it has been a release or two since we added our last one... Other than that, lots and lots of small coding style fixes, as usual. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (612 commits) staging:rtl8188eu:core Fix remove unneccessary else block staging: typec: fusb302: make structure fusb302_psy_desc static staging: unisys: visorbus: make two functions static staging: fsl-dpaa2/eth: fix off-by-one FD ctrl bitmaks staging: r8822be: Simplify deinit_priv() staging: r8822be: Remove some dead code staging: vboxvideo: Use CONFIG_DRM_KMS_FB_HELPER to check for fbdefio availability staging:rtl8188eu Fix comparison to NULL staging: rts5208: rename mmc_ddr_tunning_rx_cmd to mmc_ddr_tuning_rx_cmd Staging: Pi433: style fix - tabs and spaces staging: pi433: fix spelling mistake: "preample" -> "preamble" staging:rtl8188eu:core Fix Code Indent staging: typec: fusb302: Export current-limit through a power_supply class dev staging: typec: fusb302: Add support for USB2 charger detection through extcon staging: typec: fusb302: Use client->irq as irq if set staging: typec: fusb302: Get max snk mv/ma/mw from device-properties staging: typec: fusb302: Set max supply voltage to 5V staging: typec: tcpm: Add get_current_limit tcpc_dev callback staging:rtl8188eu Use __func__ instead of function name staging: lustre: coding style fixes found by checkpatch.pl ...

x86/lguest: Remove lguest support

2017-08-24T07:57:28Z

Lguest seems to be rather unused these days. It has seen only patches ensuring it still builds the last two years and its official state is "Odd Fixes". Remove it in order to be able to clean up the paravirt code. Signed-off-by: Juergen Gross Acked-by: Rusty Russell Acked-by: Thomas Gleixner Cc: Linus Torvalds Cc: Peter Zijlstra Cc: boris.ostrovsky@oracle.com Cc: lguest@lists.ozlabs.org Cc: rusty@rustcorp.com.au Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20170816173157.8633-3-jgross@suse.com Signed-off-by: Ingo Molnar

iio: tools: add install section

2017-08-09T13:31:58Z

Allow user to call install target. Signed-off-by: Andy Shevchenko Signed-off-by: Jonathan Cameron

spi: tools: add install section

2017-07-26T11:25:28Z

Allow user to call install target. Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown

tools: Add install make target for liblockdep

2017-06-05T07:28:08Z

Allow user to call "liblockdep_install" target. Also add liblockdep to "all" and "install" targets (as "help" command suggests). Signed-off-by: Alexander Sverdlin Signed-off-by: Sasha Levin Cc: Arnaldo Carvalho de Melo Cc: Linus Torvalds Cc: Linus Walleij Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: a.p.zijlstra@chello.nl Cc: ben@decadent.org.uk Link: http://lkml.kernel.org/r/20170525130005.5947-11-alexander.levin@verizon.com Signed-off-by: Ingo Molnar

tools/kvm: fix top level makefile

2017-05-03T14:30:25Z

The top level tools/Makefile includes kvm_stat as a target in help, but the actual target is missing. Signed-off-by: Justin M. Forbes Signed-off-by: Paolo Bonzini

tools/leds: Add uledmon program for monitoring userspace LEDs

2016-11-22T11:07:02Z

The uleds driver provides userspace LED devices. This tool is used to create one of these devices and monitor the changes in brighness for testing purposes. Signed-off-by: David Lechner Signed-off-by: Jacek Anaszewski

tools/gpio: add install section

2016-06-23T09:07:13Z

Allow user to call install target. Signed-off-by: Andy Shevchenko Acked-by: Alexandre Courbot Tested-by: Alexandre Courbot Signed-off-by: Linus Walleij