user/sven/linux.git/tools/arch, branch v5.7.14

x86/syscalls: Revert "x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long"

2020-05-26T14:42:43Z

Revert 45e29d119e99 ("x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long") and add a comment to discourage someone else from making the same mistake again. It turns out that some user code fails to compile if __X32_SYSCALL_BIT is unsigned long. See, for example [1] below. [ bp: Massage and do the same thing in the respective tools/ header. ] Fixes: 45e29d119e99 ("x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long") Reported-by: Thorsten Glaser Signed-off-by: Andy Lutomirski Signed-off-by: Borislav Petkov Cc: stable@kernel.org Link: [1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=954294 Link: https://lkml.kernel.org/r/92e55442b744a5951fdc9cfee10badd0a5f7f828.1588983892.git.luto@kernel.org

tools arch x86: Sync asm/cpufeatures.h with the kernel sources

2020-04-14T12:08:23Z

To pick up the changes from: 077168e241ec ("x86/mce/amd: Add PPIN support for AMD MCE") 753039ef8b2f ("x86/cpu/amd: Call init_amd_zn() om Family 19h processors too") 6650cdd9a8cc ("x86/split_lock: Enable split lock detection by kernel") These don't cause any changes in tooling, just silences this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Cc: Borislav Petkov Cc: Kim Phillips Cc: Peter Zijlstra (Intel) Cc: Wei Huang Signed-off-by: Arnaldo Carvalho de Melo

tools arch x86: Sync the msr-index.h copy with the kernel sources

2020-04-14T11:42:56Z

To pick up the changes in: 6650cdd9a8cc ("x86/split_lock: Enable split lock detection by kernel") Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Which causes these changes in tooling: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after --- before 2020-04-01 12:11:14.789344795 -0300 +++ after 2020-04-01 12:11:56.907798879 -0300 @@ -10,6 +10,7 @@ [0x00000029] = "KNC_EVNTSEL1", [0x0000002a] = "IA32_EBL_CR_POWERON", [0x0000002c] = "EBC_FREQUENCY_ID", + [0x00000033] = "TEST_CTRL", [0x00000034] = "SMI_COUNT", [0x0000003a] = "IA32_FEAT_CTL", [0x0000003b] = "IA32_TSC_ADJUST", @@ -27,6 +28,7 @@ [0x000000c2] = "IA32_PERFCTR1", [0x000000cd] = "FSB_FREQ", [0x000000ce] = "PLATFORM_INFO", + [0x000000cf] = "IA32_CORE_CAPS", [0x000000e2] = "PKG_CST_CONFIG_CONTROL", [0x000000e7] = "IA32_MPERF", [0x000000e8] = "IA32_APERF", $ $ make -C tools/perf O=/tmp/build/perf install-bin CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Now one can do: perf trace -e msr:* --filter=msr==IA32_CORE_CAPS or: perf trace -e msr:* --filter='msr==IA32_CORE_CAPS || msr==TEST_CTRL' And see only those MSRs being accessed via: # perf trace -v -e msr:* --filter='msr==IA32_CORE_CAPS || msr==TEST_CTRL' New filter for msr:read_msr: (msr==0xcf || msr==0x33) && (common_pid != 8263 && common_pid != 23250) New filter for msr:write_msr: (msr==0xcf || msr==0x33) && (common_pid != 8263 && common_pid != 23250) New filter for msr:rdpmc: (msr==0xcf || msr==0x33) && (common_pid != 8263 && common_pid != 23250) Cc: Adrian Hunter Cc: Borislav Petkov Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra (Intel) Link: https://lore.kernel.org/lkml/20200401153325.GC12534@kernel.org/ Signed-off-by: Arnaldo Carvalho de Melo

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2020-04-02T22:13:15Z

Pull kvm updates from Paolo Bonzini: "ARM: - GICv4.1 support - 32bit host removal PPC: - secure (encrypted) using under the Protected Execution Framework ultravisor s390: - allow disabling GISA (hardware interrupt injection) and protected VMs/ultravisor support. x86: - New dirty bitmap flag that sets all bits in the bitmap when dirty page logging is enabled; this is faster because it doesn't require bulk modification of the page tables. - Initial work on making nested SVM event injection more similar to VMX, and less buggy. - Various cleanups to MMU code (though the big ones and related optimizations were delayed to 5.8). Instead of using cr3 in function names which occasionally means eptp, KVM too has standardized on "pgd". - A large refactoring of CPUID features, which now use an array that parallels the core x86_features. - Some removal of pointer chasing from kvm_x86_ops, which will also be switched to static calls as soon as they are available. - New Tigerlake CPUID features. - More bugfixes, optimizations and cleanups. Generic: - selftests: cleanups, new MMU notifier stress test, steal-time test - CSV output for kvm_stat" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits) x86/kvm: fix a missing-prototypes "vmread_error" KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y KVM: VMX: Add a trampoline to fix VMREAD error handling KVM: SVM: Annotate svm_x86_ops as __initdata KVM: VMX: Annotate vmx_x86_ops as __initdata KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup() KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes KVM: VMX: Configure runtime hooks using vmx_x86_ops KVM: VMX: Move hardware_setup() definition below vmx_x86_ops KVM: x86: Move init-only kvm_x86_ops to separate struct KVM: Pass kvm_init()'s opaque param to additional arch funcs s390/gmap: return proper error code on ksm unsharing KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move() KVM: Fix out of range accesses to memslots KVM: X86: Micro-optimize IPI fastpath delay KVM: X86: Delay read msr data iff writes ICR MSR KVM: PPC: Book3S HV: Add a capability for enabling secure guests KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs ...

x86/insn: Add Control-flow Enforcement (CET) instructions to the opcode map

2020-03-26T11:21:40Z

Add the following CET instructions to the opcode map: INCSSP: Increment Shadow Stack pointer (SSP). RDSSP: Read SSP into a GPR. SAVEPREVSSP: Use "previous ssp" token at top of current Shadow Stack (SHSTK) to create a "restore token" on the previous (outgoing) SHSTK. RSTORSSP: Restore from a "restore token" to SSP. WRSS: Write to kernel-mode SHSTK (kernel-mode instruction). WRUSS: Write to user-mode SHSTK (kernel-mode instruction). SETSSBSY: Verify the "supervisor token" pointed by MSR_IA32_PL0_SSP, set the token busy, and set then Shadow Stack pointer(SSP) to the value of MSR_IA32_PL0_SSP. CLRSSBSY: Verify the "supervisor token" and clear its busy bit. ENDBR64/ENDBR32: Mark a valid 64/32 bit control transfer endpoint. Detailed information of CET instructions can be found in Intel Software Developer's Manual. Signed-off-by: Yu-cheng Yu Signed-off-by: Borislav Petkov Reviewed-by: Adrian Hunter Reviewed-by: Tony Luck Acked-by: Masami Hiramatsu Link: https://lkml.kernel.org/r/20200204171425.28073-2-yu-cheng.yu@intel.com

Merge tag 'kvm-s390-next-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

2020-03-16T17:19:34Z

KVM: s390: Features and Enhancements for 5.7 part1 1. Allow to disable gisa 2. protected virtual machines Protected VMs (PVM) are KVM VMs, where KVM can't access the VM's state like guest memory and guest registers anymore. Instead the PVMs are mostly managed by a new entity called Ultravisor (UV), which provides an API, so KVM and the PV can request management actions. PVMs are encrypted at rest and protected from hypervisor access while running. They switch from a normal operation into protected mode, so we can still use the standard boot process to load a encrypted blob and then move it into protected mode. Rebooting is only possible by passing through the unprotected/normal mode and switching to protected again. One mm related patch will go via Andrews mm tree ( mm/gup/writeback: add callbacks for inaccessible pages)

KVM: selftests: Add demand paging content to the demand paging test

2020-03-16T16:56:48Z

The demand paging test is currently a simple page access test which, while potentially useful, doesn't add much versus the existing dirty logging test. To improve the demand paging test, add a basic userfaultfd demand paging implementation. Signed-off-by: Ben Gardon Signed-off-by: Paolo Bonzini

tools headers UAPI: Update tools's copy of kvm.h headers

2020-02-27T12:51:30Z

Picking the changes from: 5ef8acbdd687 ("KVM: nVMX: Emulate MTF when performing instruction emulation") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h' diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h No change in tooling ensues, just the x86 kvm tooling gets rebuilt as those headers are included in its build: $ cp arch/x86/include/uapi/asm/kvm.h tools/arch/x86/include/uapi/asm/kvm.h $ make -C tools/perf make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j12' parallel build Auto-detecting system features: ... dwarf: [ on ] ... disassembler-four-args: [ on ] DESCEND plugins CC /tmp/build/perf/arch/x86/util/kvm-stat.o LD /tmp/build/perf/arch/x86/util/perf-in.o LD /tmp/build/perf/arch/x86/perf-in.o LD /tmp/build/perf/arch/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf $ As it doesn't seem to be used there: $ grep STATE tools/perf/arch/x86/util/kvm-stat.c $ And the 'perf trace' beautifier table generator isn't interested in these things: $ grep regex= tools/perf/trace/beauty/kvm_ioctl.sh regex='^#[[:space:]]*define[[:space:]]+KVM_(\w+)[[:space:]]+_IO[RW]*\([[:space:]]*KVMIO[[:space:]]*,[[:space:]]*(0x[[:xdigit:]]+).*' $ Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Cc: Oliver Upton Cc: Paolo Bonzini Signed-off-by: Arnaldo Carvalho de Melo

tools arch x86: Sync the msr-index.h copy with the kernel sources

2020-02-27T12:49:56Z

To pick up the changes from these csets: 21b5ee59ef18 ("x86/cpu/amd: Enable the fixed Instructions Retired counter IRPERF") $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ git diff diff --git a/tools/arch/x86/include/asm/msr-index.h b/tools/arch/x86/include/asm/msr-index.h index ebe1685e92dd..d5e517d1c3dd 100644 --- a/tools/arch/x86/include/asm/msr-index.h +++ b/tools/arch/x86/include/asm/msr-index.h @@ -512,6 +512,8 @@ #define MSR_K7_HWCR 0xc0010015 #define MSR_K7_HWCR_SMMLOCK_BIT 0 #define MSR_K7_HWCR_SMMLOCK BIT_ULL(MSR_K7_HWCR_SMMLOCK_BIT) +#define MSR_K7_HWCR_IRPERF_EN_BIT 30 +#define MSR_K7_HWCR_IRPERF_EN BIT_ULL(MSR_K7_HWCR_IRPERF_EN_BIT) #define MSR_K7_FID_VID_CTL 0xc0010041 #define MSR_K7_FID_VID_STATUS 0xc0010042 $ That don't result in any change in tooling: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after $ To silence this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Cc: Adrian Hunter Cc: Borislav Petkov Cc: Jiri Olsa Cc: Kim Phillips Cc: Namhyung Kim Signed-off-by: Arnaldo Carvalho de Melo

tools headers kvm: Sync kvm headers with the kernel sources

2020-02-12T15:41:20Z

To pick up the changes from: 290a6bb06de9 ("arm64: KVM: Add UAPI notes for swapped registers") No tools changes are caused by this. This addresses these tools/perf build warnings: Cc: Adrian Hunter Cc: Andrew Jones Cc: Jiri Olsa Cc: Marc Zyngier Cc: Namhyung Kim Signed-off-by: Arnaldo Carvalho de Melo