user/sven/linux.git/tools/objtool, branch v4.14.187

objtool: Ignore empty alternatives

2020-06-20T08:25:07Z

[ Upstream commit 7170cf47d16f1ba29eca07fd818870b7af0a93a5 ] The .alternatives section can contain entries with no original instructions. Objtool will currently crash when handling such an entry. Just skip that entry, but still give a warning to discourage useless entries. Signed-off-by: Julien Thierry Acked-by: Peter Zijlstra (Intel) Reviewed-by: Miroslav Benes Signed-off-by: Josh Poimboeuf Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin

objtool: Fix stack offset tracking for indirect CFAs

2020-05-20T06:17:01Z

commit d8dd25a461e4eec7190cb9d66616aceacc5110ad upstream. When the current frame address (CFA) is stored on the stack (i.e., cfa->base == CFI_SP_INDIRECT), objtool neglects to adjust the stack offset when there are subsequent pushes or pops. This results in bad ORC data at the end of the ENTER_IRQ_STACK macro, when it puts the previous stack pointer on the stack and does a subsequent push. This fixes the following unwinder warning: WARNING: can't dereference registers at 00000000f0a6bdba for ip interrupt_entry+0x9f/0xa0 Fixes: 627fce14809b ("objtool: Add ORC unwind table generation") Reported-by: Vince Weaver Reported-by: Dave Jones Reported-by: Steven Rostedt Reported-by: Vegard Nossum Reported-by: Joe Mario Reviewed-by: Miroslav Benes Signed-off-by: Josh Poimboeuf Signed-off-by: Ingo Molnar Cc: Andy Lutomirski Cc: Jann Horn Cc: Peter Zijlstra Cc: Thomas Gleixner Link: https://lore.kernel.org/r/853d5d691b29e250333332f09b8e27410b2d9924.1587808742.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman

objtool: Support Clang non-section symbols in ORC dump

2020-05-02T15:24:44Z

[ Upstream commit 8782e7cab51b6bf01a5a86471dd82228af1ac185 ] Historically, the relocation symbols for ORC entries have only been section symbols: .text+0: sp:sp+8 bp:(und) type:call end:0 However, the Clang assembler is aggressive about stripping section symbols. In that case we will need to use function symbols: freezing_slow_path+0: sp:sp+8 bp:(und) type:call end:0 In preparation for the generation of such entries in "objtool orc generate", add support for reading them in "objtool orc dump". Signed-off-by: Josh Poimboeuf Signed-off-by: Borislav Petkov Reviewed-by: Miroslav Benes Acked-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/b811b5eb1a42602c3b523576dc5efab9ad1c174d.1585761021.git.jpoimboe@redhat.com Signed-off-by: Sasha Levin

objtool: Fix CONFIG_UBSAN_TRAP unreachable warnings

2020-05-02T15:24:43Z

[ Upstream commit bd841d6154f5f41f8a32d3c1b0bc229e326e640a ] CONFIG_UBSAN_TRAP causes GCC to emit a UD2 whenever it encounters an unreachable code path. This includes __builtin_unreachable(). Because the BUG() macro uses __builtin_unreachable() after it emits its own UD2, this results in a double UD2. In this case objtool rightfully detects that the second UD2 is unreachable: init/main.o: warning: objtool: repair_env_string()+0x1c8: unreachable instruction We weren't able to figure out a way to get rid of the double UD2s, so just silence the warning. Reported-by: Randy Dunlap Signed-off-by: Josh Poimboeuf Signed-off-by: Borislav Petkov Reviewed-by: Kees Cook Reviewed-by: Miroslav Benes Acked-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/6653ad73c6b59c049211bd7c11ed3809c20ee9f5.1585761021.git.jpoimboe@redhat.com Signed-off-by: Sasha Levin

objtool: Fix switch table detection in .text.unlikely

2020-04-24T06:01:00Z

commit b401efc120a399dfda1f4d2858a4de365c9b08ef upstream. If a switch jump table's indirect branch is in a ".cold" subfunction in .text.unlikely, objtool doesn't detect it, and instead prints a false warning: drivers/media/v4l2-core/v4l2-ioctl.o: warning: objtool: v4l_print_format.cold()+0xd6: sibling call from callable instruction with modified stack frame drivers/hwmon/max6650.o: warning: objtool: max6650_probe.cold()+0xa5: sibling call from callable instruction with modified stack frame drivers/media/dvb-frontends/drxk_hard.o: warning: objtool: init_drxk.cold()+0x16f: sibling call from callable instruction with modified stack frame Fix it by comparing the function, instead of the section and offset. Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions") Signed-off-by: Josh Poimboeuf Signed-off-by: Borislav Petkov Reviewed-by: Miroslav Benes Acked-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/157c35d42ca9b6354bbb1604fe9ad7d1153ccb21.1585761021.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman

x86/decoder: Add TEST opcode to Group3-2

2020-02-28T15:36:06Z

[ Upstream commit 8b7e20a7ba54836076ff35a28349dabea4cec48f ] Add TEST opcode to Group3-2 reg=001b as same as Group3-1 does. Commit 12a78d43de76 ("x86/decoder: Add new TEST instruction pattern") added a TEST opcode assignment to f6 XX/001/XXX (Group 3-1), but did not add f7 XX/001/XXX (Group 3-2). Actually, this TEST opcode variant (ModRM.reg /1) is not described in the Intel SDM Vol2 but in AMD64 Architecture Programmer's Manual Vol.3, Appendix A.2 Table A-6. ModRM.reg Extensions for the Primary Opcode Map. Without this fix, Randy found a warning by insn_decoder_test related to this issue as below. HOSTCC arch/x86/tools/insn_decoder_test HOSTCC arch/x86/tools/insn_sanity TEST posttest arch/x86/tools/insn_decoder_test: warning: Found an x86 instruction decoder bug, please report this. arch/x86/tools/insn_decoder_test: warning: ffffffff81000bf1: f7 0b 00 01 08 00 testl $0x80100,(%rbx) arch/x86/tools/insn_decoder_test: warning: objdump says 6 bytes, but insn_get_length() says 2 arch/x86/tools/insn_decoder_test: warning: Decoded and checked 11913894 instructions with 1 failures TEST posttest arch/x86/tools/insn_sanity: Success: decoded and checked 1000000 random instructions with 0 errors (seed:0x871ce29c) To fix this error, add the TEST opcode according to AMD64 APM Vol.3. [ bp: Massage commit message. ] Reported-by: Randy Dunlap Signed-off-by: Masami Hiramatsu Signed-off-by: Borislav Petkov Acked-by: Randy Dunlap Tested-by: Randy Dunlap Link: https://lkml.kernel.org/r/157966631413.9580.10311036595431878351.stgit@devnote2 Signed-off-by: Sasha Levin

x86/insn: Add some Intel instructions to the opcode map

2019-12-31T11:37:45Z

[ Upstream commit b980be189c9badba50634671e2303e92bf28e35a ] Add to the opcode map the following instructions: cldemote tpause umonitor umwait movdiri movdir64b enqcmd enqcmds encls enclu enclv pconfig wbnoinvd For information about the instructions, refer Intel SDM May 2019 (325462-070US) and Intel Architecture Instruction Set Extensions May 2019 (319433-037). The instruction decoding can be tested using the perf tools' "x86 instruction decoder - new instructions" test as folllows: $ perf test -v "new " 2>&1 | grep -i cldemote Decoded ok: 0f 1c 00 cldemote (%eax) Decoded ok: 0f 1c 05 78 56 34 12 cldemote 0x12345678 Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%eax,%ecx,8) Decoded ok: 0f 1c 00 cldemote (%rax) Decoded ok: 41 0f 1c 00 cldemote (%r8) Decoded ok: 0f 1c 04 25 78 56 34 12 cldemote 0x12345678 Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%rax,%rcx,8) Decoded ok: 41 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%r8,%rcx,8) $ perf test -v "new " 2>&1 | grep -i tpause Decoded ok: 66 0f ae f3 tpause %ebx Decoded ok: 66 0f ae f3 tpause %ebx Decoded ok: 66 41 0f ae f0 tpause %r8d $ perf test -v "new " 2>&1 | grep -i umonitor Decoded ok: 67 f3 0f ae f0 umonitor %ax Decoded ok: f3 0f ae f0 umonitor %eax Decoded ok: 67 f3 0f ae f0 umonitor %eax Decoded ok: f3 0f ae f0 umonitor %rax Decoded ok: 67 f3 41 0f ae f0 umonitor %r8d $ perf test -v "new " 2>&1 | grep -i umwait Decoded ok: f2 0f ae f0 umwait %eax Decoded ok: f2 0f ae f0 umwait %eax Decoded ok: f2 41 0f ae f0 umwait %r8d $ perf test -v "new " 2>&1 | grep -i movdiri Decoded ok: 0f 38 f9 03 movdiri %eax,(%ebx) Decoded ok: 0f 38 f9 88 78 56 34 12 movdiri %ecx,0x12345678(%eax) Decoded ok: 48 0f 38 f9 03 movdiri %rax,(%rbx) Decoded ok: 48 0f 38 f9 88 78 56 34 12 movdiri %rcx,0x12345678(%rax) $ perf test -v "new " 2>&1 | grep -i movdir64b Decoded ok: 66 0f 38 f8 18 movdir64b (%eax),%ebx Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx Decoded ok: 67 66 0f 38 f8 1c movdir64b (%si),%bx Decoded ok: 67 66 0f 38 f8 8c 34 12 movdir64b 0x1234(%si),%cx Decoded ok: 66 0f 38 f8 18 movdir64b (%rax),%rbx Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%rax),%rcx Decoded ok: 67 66 0f 38 f8 18 movdir64b (%eax),%ebx Decoded ok: 67 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i enqcmd Decoded ok: f2 0f 38 f8 18 enqcmd (%eax),%ebx Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx Decoded ok: 67 f2 0f 38 f8 1c enqcmd (%si),%bx Decoded ok: 67 f2 0f 38 f8 8c 34 12 enqcmd 0x1234(%si),%cx Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx Decoded ok: f2 0f 38 f8 18 enqcmd (%rax),%rbx Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%rax),%rcx Decoded ok: 67 f2 0f 38 f8 18 enqcmd (%eax),%ebx Decoded ok: 67 f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i enqcmds Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i encls Decoded ok: 0f 01 cf encls Decoded ok: 0f 01 cf encls $ perf test -v "new " 2>&1 | grep -i enclu Decoded ok: 0f 01 d7 enclu Decoded ok: 0f 01 d7 enclu $ perf test -v "new " 2>&1 | grep -i enclv Decoded ok: 0f 01 c0 enclv Decoded ok: 0f 01 c0 enclv $ perf test -v "new " 2>&1 | grep -i pconfig Decoded ok: 0f 01 c5 pconfig Decoded ok: 0f 01 c5 pconfig $ perf test -v "new " 2>&1 | grep -i wbnoinvd Decoded ok: f3 0f 09 wbnoinvd Decoded ok: f3 0f 09 wbnoinvd Signed-off-by: Adrian Hunter Reviewed-by: Andi Kleen Acked-by: Masami Hiramatsu Cc: Borislav Petkov Cc: H. Peter Anvin Cc: Jiri Olsa Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/20191115135447.6519-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin

x86/insn: Fix awk regexp warnings

2019-12-01T08:14:21Z

commit 700c1018b86d0d4b3f1f2d459708c0cdf42b521d upstream. gawk 5.0.1 generates the following regexp warnings: GEN /home/sasha/torvalds/tools/objtool/arch/x86/lib/inat-tables.c awk: ../arch/x86/tools/gen-insn-attr-x86.awk:260: warning: regexp escape sequence `\:' is not a known regexp operator awk: ../arch/x86/tools/gen-insn-attr-x86.awk:350: (FILENAME=../arch/x86/lib/x86-opcode-map.txt FNR=41) warning: regexp escape sequence `\&' is not a known regexp operator Ealier versions of gawk are not known to generate these warnings. The gawk manual referenced below does not list characters ':' and '&' as needing escaping, so 'unescape' them. See https://www.gnu.org/software/gawk/manual/html_node/Escape-Sequences.html for more info. Running diff on the output generated by the script before and after applying the patch reported no differences. [ bp: Massage commit message. ] [ Caught the respective tools header discrepancy. ] Reported-by: kbuild test robot Signed-off-by: Alexander Kapshuk Signed-off-by: Borislav Petkov Acked-by: Masami Hiramatsu Cc: "H. Peter Anvin" Cc: "Peter Zijlstra (Intel)" Cc: Arnaldo Carvalho de Melo Cc: Ingo Molnar Cc: Josh Poimboeuf Cc: Thomas Gleixner Cc: x86-ml Link: https://lkml.kernel.org/r/20190924044659.3785-1-alexander.kapshuk@gmail.com Signed-off-by: Greg Kroah-Hartman

objtool: Clobber user CFLAGS variable

2019-10-05T10:47:35Z

commit f73b3cc39c84220e6dccd463b5c8279b03514646 upstream. If the build user has the CFLAGS variable set in their environment, objtool blindly appends to it, which can cause unexpected behavior. Clobber CFLAGS to ensure consistent objtool compilation behavior. Reported-by: Valdis Kletnieks Tested-by: Valdis Kletnieks Signed-off-by: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: https://lkml.kernel.org/r/83a276df209962e6058fcb6c615eef9d401c21bc.1567121311.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar CC: Nathan Chancellor Signed-off-by: Greg Kroah-Hartman

objtool: Query pkg-config for libelf location

2019-10-05T10:47:32Z

commit 056d28d135bca0b1d0908990338e00e9dadaf057 upstream. If it is not in the default location, compilation fails at several points. Signed-off-by: Rolf Eike Beer Signed-off-by: Josh Poimboeuf Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/91a25e992566a7968fedc89ec80e7f4c83ad0548.1553622500.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman