user/sven/linux.git/tools/objtool, branch v4.9.93

objtool: Improve error message for bad file argument

2018-01-23T18:57:05Z

commit 385d11b152c4eb638eeb769edcb3249533bb9a00 upstream. If a nonexistent file is supplied to objtool, it complains with a non-helpful error: open: No such file or directory Improve it to: objtool: Can't open 'foo': No such file or directory Reported-by: Markus Signed-off-by: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/406a3d00a21225eee2819844048e17f68523ccf6.1516025651.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

objtool: Fix retpoline support for pre-ORC objtool

2018-01-17T08:39:00Z

Objtool 1.0 (pre-ORC) produces the following warning when it encounters a retpoline: arch/x86/crypto/camellia-aesni-avx2-asm_64.o: warning: objtool: .altinstr_replacement+0xf: return instruction outside of a callable function That warning is meant to catch GCC bugs and missing ENTRY/ENDPROC annotations, neither of which are applicable to alternatives. Silence the warning for alternative instructions, just like objtool 2.0 already does. Reported-by: David Woodhouse Signed-off-by: Josh Poimboeuf Signed-off-by: Greg Kroah-Hartman

objtool: Allow alternatives to be ignored

2018-01-17T08:38:58Z

commit 258c76059cece01bebae098e81bacb1af2edad17 upstream. Getting objtool to understand retpolines is going to be a bit of a challenge. For now, take advantage of the fact that retpolines are patched in with alternatives. Just read the original (sane) non-alternative instruction, and ignore the patched-in retpoline. This allows objtool to understand the control flow *around* the retpoline, even if it can't yet follow what's inside. This means the ORC unwinder will fail to unwind from inside a retpoline, but will work fine otherwise. Signed-off-by: Josh Poimboeuf Signed-off-by: David Woodhouse Signed-off-by: Thomas Gleixner Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel Cc: Andi Kleen Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra Cc: Linus Torvalds Cc: Jiri Kosina Cc: Andy Lutomirski Cc: Dave Hansen Cc: Kees Cook Cc: Tim Chen Cc: Greg Kroah-Hartman Cc: Paul Turner Link: https://lkml.kernel.org/r/1515707194-20531-3-git-send-email-dwmw@amazon.co.uk [dwmw2: Applies to tools/objtool/builtin-check.c not check.[ch]] Signed-off-by: David Woodhouse Signed-off-by: Greg Kroah-Hartman

objtool: Detect jumps to retpoline thunks

2018-01-17T08:38:58Z

commit 39b735332cb8b33a27c28592d969e4016c86c3ea upstream. A direct jump to a retpoline thunk is really an indirect jump in disguise. Change the objtool instruction type accordingly. Objtool needs to know where indirect branches are so it can detect switch statement jump tables. This fixes a bunch of warnings with CONFIG_RETPOLINE like: arch/x86/events/intel/uncore_nhmex.o: warning: objtool: nhmex_rbox_msr_enable_event()+0x44: sibling call from callable instruction with modified stack frame kernel/signal.o: warning: objtool: copy_siginfo_to_user()+0x91: sibling call from callable instruction with modified stack frame ... Signed-off-by: Josh Poimboeuf Signed-off-by: David Woodhouse Signed-off-by: Thomas Gleixner Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel Cc: Andi Kleen Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra Cc: Linus Torvalds Cc: Jiri Kosina Cc: Andy Lutomirski Cc: Dave Hansen Cc: Kees Cook Cc: Tim Chen Cc: Greg Kroah-Hartman Cc: Paul Turner Link: https://lkml.kernel.org/r/1515707194-20531-2-git-send-email-dwmw@amazon.co.uk [dwmw2: Applies to tools/objtool/builtin-check.c not check.c] Signed-off-by: David Woodhouse Signed-off-by: Greg Kroah-Hartman

objtool, modules: Discard objtool annotation sections for modules

2018-01-17T08:38:58Z

commit e390f9a9689a42f477a6073e2e7df530a4c1b740 upstream. The '__unreachable' and '__func_stack_frame_non_standard' sections are only used at compile time. They're discarded for vmlinux but they should also be discarded for modules. Since this is a recurring pattern, prefix the section names with ".discard.". It's a nice convention and vmlinux.lds.h already discards such sections. Also remove the 'a' (allocatable) flag from the __unreachable section since it doesn't make sense for a discarded section. Suggested-by: Linus Torvalds Signed-off-by: Josh Poimboeuf Cc: Jessica Yu Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: d1091c7fa3d5 ("objtool: Improve detection of BUG() and other dead ends") Link: http://lkml.kernel.org/r/20170301180444.lhd53c5tibc4ns77@treble Signed-off-by: Ingo Molnar [dwmw2: Remove the unreachable part in backporting since it's not here yet] Signed-off-by: David Woodhouse Signed-off-by: Greg Kroah-Hartman

sync objtool's copy of x86-opcode-map.txt

2018-01-02T19:35:06Z

When building objtool, we get the warning: warning: objtool: x86 instruction decoder differs from kernel That's due to commit 2816c0455cea088f07a210f8a00701a82a78aa9c which was commit 12a78d43de767eaf8fb272facb7a7b6f2dc6a9df upstream that modified arch/x86/lib/x86-opcode-map.txt without also updating the objtool copy. The objtool copy was updated in a much larger patch upstream, but we don't need all of that here, so just update the single file. If this gets too annoying, I'll just end up doing what we did for 4.14 and backport the whole series to keep this from happening again, but as this seems to be rare in the 4.9-stable series, this single patch should be fine. Cc: Masami Hiramatsu Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

objtool: Fix another GCC jump table detection issue

2017-07-05T12:40:30Z

commit 5c51f4ae84df0f9df33ac08aa5be50061a8b4242 upstream. Arnd Bergmann reported a (false positive) objtool warning: drivers/infiniband/sw/rxe/rxe_resp.o: warning: objtool: rxe_responder()+0xfe: sibling call from callable instruction with changed frame pointer The issue is in find_switch_table(). It tries to find a switch statement's jump table by walking backwards from an indirect jump instruction, looking for a relocation to the .rodata section. In this case it stopped walking prematurely: the first .rodata relocation it encountered was for a variable (resp_state_name) instead of a jump table, so it just assumed there wasn't a jump table. The fix is to ignore any .rodata relocation which refers to an ELF object symbol. This works because the jump tables are anonymous and have no symbols associated with them. Reported-by: Arnd Bergmann Tested-by: Arnd Bergmann Signed-off-by: Josh Poimboeuf Cc: Denys Vlasenko Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: 3732710ff6f2 ("objtool: Improve rare switch jump table pattern detection") Link: http://lkml.kernel.org/r/20170302225723.3ndbsnl4hkqbne7a@treble Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

objtool: Fix IRET's opcode

2017-07-05T12:40:22Z

[ Upstream commit b5b46c4740aed1538544f0fa849c5b76c7823469 ] The IRET opcode is 0xcf according to the Intel manual and also to objdump of my vmlinux: 1ea8: 48 cf iretq Fix the opcode in arch_decode_instruction(). The previous value (0xc5) seems to correspond to LDS. Signed-off-by: Jiri Slaby Acked-by: Josh Poimboeuf Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20170118132921.19319-1-jslaby@suse.cz Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

objtool: Fix bytes check of lea's rex_prefix

2016-12-06T08:20:59Z

For the "lea %(rsp), %rbp" case, we check if there is a rex_prefix. But we check 'bytes' which is insn_byte_t[4] in rex_prefix (insn_field structure). Therefore, the check is always true. Instead, check 'nbytes' which is the right one. Signed-off-by: Jiri Slaby Acked-by: Josh Poimboeuf Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20161205105551.25917-1-jslaby@suse.cz Signed-off-by: Ingo Molnar

objtool: Fix rare switch jump table pattern detection

2016-10-27T06:20:27Z

The following commit: 3732710ff6f2 ("objtool: Improve rare switch jump table pattern detection") ... improved objtool's ability to detect GCC switch statement jump tables for GCC 6. However the check to allow short jumps with the scanned range of instructions wasn't quite right. The pattern detection should allow jumps to the indirect jump instruction itself. This fixes the following warning: drivers/infiniband/sw/rxe/rxe_comp.o: warning: objtool: rxe_completer()+0x315: sibling call from callable instruction with changed frame pointer Reported-by: Arnd Bergmann Signed-off-by: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: 3732710ff6f2 ("objtool: Improve rare switch jump table pattern detection") Link: http://lkml.kernel.org/r/20161026153408.2rifnw7bvoc5sex7@treble Signed-off-by: Ingo Molnar