user/sven/linux.git/tools/perf/ui, branch v4.14.187

perf hists browser: Restore ESC as "Zoom out" of DSO/thread/etc

2020-03-11T17:02:54Z

commit 3f7774033e6820d25beee5cf7aefa11d4968b951 upstream. We need to set actions->ms.map since 599a2f38a989 ("perf hists browser: Check sort keys before hot key actions"), as in that patch we bail out if map is NULL. Reviewed-by: Jiri Olsa Cc: Adrian Hunter Cc: Namhyung Kim Fixes: 599a2f38a989 ("perf hists browser: Check sort keys before hot key actions") Link: https://lkml.kernel.org/n/tip-wp1ssoewy6zihwwexqpohv0j@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Greg Kroah-Hartman

perf ui helpline: Use strlcpy() as a shorter form of strncpy() + explicit set nul

2019-07-03T11:15:57Z

commit 4d0f16d059ddb91424480d88473f7392f24aebdc upstream. The strncpy() function may leave the destination string buffer unterminated, better use strlcpy() that we have a __weak fallback implementation for systems without it. In this case we are actually setting the null byte at the right place, but since we pass the buffer size as the limit to strncpy() and not it minus one, gcc ends up warning us about that, see below. So, lets just switch to the shorter form provided by strlcpy(). This fixes this warning on an Alpine Linux Edge system with gcc 8.2: ui/tui/helpline.c: In function 'tui_helpline__push': ui/tui/helpline.c:27:2: error: 'strncpy' specified bound 512 equals destination size [-Werror=stringop-truncation] strncpy(ui_helpline__current, msg, sz)[sz - 1] = '\0'; ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Fixes: e6e904687949 ("perf ui: Introduce struct ui_helpline") Link: https://lkml.kernel.org/n/tip-d1wz0hjjsh19xbalw69qpytj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Greg Kroah-Hartman

perf report: Fix wrong jump arrow

2018-05-30T05:52:40Z

[ Upstream commit b40982e8468b46b8f7f5bba5a7e541ec04a29d7d ] When we use perf report interactive annotate view, we can see the position of jump arrow is not correct. For example, 1. perf record -b ... 2. perf report 3. In interactive mode, select Annotate 'function' Percent│ IPC Cycle │ if (flag) 1.37 │0.4┌── 1 ↓ je 82 │ │ x += x / y + y / x; 0.00 │0.4│ 1310 movsd (%rsp),%xmm0 0.00 │0.4│ 565 movsd 0x8(%rsp),%xmm4 │0.4│ movsd 0x8(%rsp),%xmm1 │0.4│ movsd (%rsp),%xmm3 │0.4│ divsd %xmm4,%xmm0 0.00 │0.4│ 579 divsd %xmm3,%xmm1 │0.4│ movsd (%rsp),%xmm2 │0.4│ addsd %xmm1,%xmm0 │0.4│ addsd %xmm2,%xmm0 0.00 │0.4│ movsd %xmm0,(%rsp) │ │ volatile double x = 1212121212, y = 121212; │ │ │ │ s_randseed = time(0); │ │ srand(s_randseed); │ │ │ │ for (i = 0; i < 2000000000; i++) { 1.37 │0.4└─→ 82: sub $0x1,%ebx 28.21 │0.48 17 ↑ jne 38 The jump arrow in above example is not correct. It should add the width of IPC and Cycle. With this patch, the result is: Percent│ IPC Cycle │ if (flag) 1.37 │0.48 1 ┌──je 82 │ │ x += x / y + y / x; 0.00 │0.48 1310 │ movsd (%rsp),%xmm0 0.00 │0.48 565 │ movsd 0x8(%rsp),%xmm4 │0.48 │ movsd 0x8(%rsp),%xmm1 │0.48 │ movsd (%rsp),%xmm3 │0.48 │ divsd %xmm4,%xmm0 0.00 │0.48 579 │ divsd %xmm3,%xmm1 │0.48 │ movsd (%rsp),%xmm2 │0.48 │ addsd %xmm1,%xmm0 │0.48 │ addsd %xmm2,%xmm0 0.00 │0.48 │ movsd %xmm0,(%rsp) │ │ volatile double x = 1212121212, y = 121212; │ │ │ │ s_randseed = time(0); │ │ srand(s_randseed); │ │ │ │ for (i = 0; i < 2000000000; i++) { 1.37 │0.48 82:└─→sub $0x1,%ebx 28.21 │0.48 17 ↑ jne 38 Committer notes: Please note that only from LBRv5 (according to Jiri) onwards, i.e. >= Skylake is that we'll have the cycles counts in each branch record entry, so to see the Cycles and IPC columns, and be able to test this patch, one need a capable hardware. While applying this I first tested it on a Broadwell class machine and couldn't get those columns, will add code to the annotate browser to warn the user about that, i.e. you have branch records, but no cycles, use a more recent hardware to get the cycles and IPC columns. Signed-off-by: Jin Yao Cc: Alexander Shishkin Cc: Andi Kleen Cc: Jin Yao Cc: Jiri Olsa Cc: Kan Liang Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1517223473-14750-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

perf hists: Add extra integrity checks to fmt_free()

2017-10-13T19:43:42Z

Make sure the struct perf_hpp_fmt is properly unhooked before we free it. Signed-off-by: Jiri Olsa Cc: Andi Kleen Cc: Changbin Du Cc: David Ahern Cc: Jin Yao Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Wang Nan Link: http://lkml.kernel.org/r/20171013083736.15037-3-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf hists: Fix crash in perf_hpp__reset_output_field()

2017-10-13T19:43:33Z

Du Changbin reported crash [1] when calling perf_hpp__reset_output_field() after unregistering field via perf_hpp__column_unregister(). This ends up in calling following list_del* sequence on the same format: perf_hpp__column_unregister: list_del(&format->list); perf_hpp__reset_output_field: list_del_init(&fmt->list); where the later list_del_init might touch already freed formats. Fixing this by replacing list_del() with list_del_init() in perf_hpp__column_unregister(). [1] http://marc.info/?l=linux-kernel&m=149059595826019&w=2 Reported-by: Changbin Du Signed-off-by: Jiri Olsa Cc: Andi Kleen Cc: David Ahern Cc: Jin Yao Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Wang Nan Link: http://lkml.kernel.org/r/20171013083736.15037-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf ui progress: Fix progress update

2017-09-12T15:34:54Z

We currently update the 'next' variable only with a single step value. But it's possible the 'adv' update is bigger than single 'step' value. This would leave 'next' value under counted and force unnecessary ui_progress__ops->update calls. Calculate the amount of steps we need for 'adv' update and increase the 'next' with that amounts of steps. Signed-off-by: Jiri Olsa Cc: David Ahern Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20170908120510.22515-3-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf ui progress: Make sure we always define step value

2017-09-12T15:34:46Z

Unlikely, but we could have ui_progress__init being called with total < 16, which would set the next and step variables to 0. That would force unnecessary ui_progress__ops->update calls because 'next' would never raise. Forcing the next and step values to be always > 0. Signed-off-by: Jiri Olsa Cc: David Ahern Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20170908120510.22515-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf annotate browser: Help for cycling thru hottest instructions with TAB/shift+TAB

2017-09-01T17:55:40Z

The popup help accessed via 'h' wasn't mentioning about TAB and shift-TAB, just about 'H', which goes to the hottest line, while the former two are the hotkeys for actually cycling thru the hottest lines. Reported-by: Flavio Bruno Leitner Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Cc: Taeung Song Cc: Wang Nan Link: http://lkml.kernel.org/n/tip-5ppym6odizfj1ifa4t7neiku@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf report: Calculate the average cycles of iterations

2017-08-30T13:03:27Z

The branch history code has a loop detection function. With this, we can get the number of iterations by calculating the removed loops. While it would be nice for knowing the average cycles of iterations. This patch adds up the cycles in branch entries of removed loops and save the result to the next branch entry (e.g. branch entry A). Finally it will display the iteration number and average cycles at the "from" of branch entry A. For example: perf record -g -j any,save_type ./div perf report --branch-history --no-children --stdio --22.63%--main div.c:42 (RET CROSS_2M) compute_flag div.c:28 (cycles:2 iter:173115 avg_cycles:2) | --10.73%--compute_flag div.c:27 (RET CROSS_2M) rand rand.c:28 (cycles:1) rand rand.c:28 (RET CROSS_2M) __random random.c:298 (cycles:1) __random random.c:297 (COND_BWD CROSS_2M) __random random.c:295 (cycles:1) __random random.c:295 (COND_BWD CROSS_2M) __random random.c:295 (cycles:1) __random random.c:295 (RET CROSS_2M) Signed-off-by: Yao Jin Reviewed-by: Andi Kleen Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Kan Liang Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1502111115-18305-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo