user/sven/linux.git/tools/perf, branch v4.19.261

perf kcore_copy: Do not check /proc/modules is unchanged

2022-09-28T09:02:57Z

[ Upstream commit 5b427df27b94aec1312cace48a746782a0925c53 ] /proc/kallsyms and /proc/modules are compared before and after the copy in order to ensure no changes during the copy. However /proc/modules also might change due to reference counts changing even though that does not make any difference. Any modules loaded or unloaded should be visible in changes to kallsyms, so it is not necessary to check /proc/modules also anyway. Remove the comparison checking that /proc/modules is unchanged. Fixes: fc1b691d7651d949 ("perf buildid-cache: Add ability to add kcore to the cache") Reported-by: Daniel Dao Signed-off-by: Adrian Hunter Tested-by: Daniel Dao Acked-by: Namhyung Kim Cc: Ian Rogers Cc: Jiri Olsa Link: https://lore.kernel.org/r/20220914122429.8770-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin

perf jit: Include program header in ELF files

2022-09-28T09:02:57Z

[ Upstream commit babd04386b1df8c364cdaa39ac0e54349502e1e5 ] The missing header makes it hard for programs like elfutils to open these files. Fixes: 2d86612aacb7805f ("perf symbol: Correct address for bss symbols") Reviewed-by: Leo Yan Signed-off-by: Lieven Hey Tested-by: Leo Yan Cc: Leo Yan Link: https://lore.kernel.org/r/20220915092910.711036-1-lieven.hey@kdab.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin

genelf: Use HAVE_LIBCRYPTO_SUPPORT, not the never defined HAVE_LIBCRYPTO

2022-08-25T09:15:26Z

[ Upstream commit 91cea6be90e436c55cde8770a15e4dac9d3032d0 ] When genelf was introduced it tested for HAVE_LIBCRYPTO not HAVE_LIBCRYPTO_SUPPORT, which is the define the feature test for openssl defines, fix it. This also adds disables the deprecation warning, someone has to fix this to build with openssl 3.0 before the warning becomes a hard error. Fixes: 9b07e27f88b9cd78 ("perf inject: Add jitdump mmap injection support") Reported-by: 谭梓煊 Cc: Alexei Starovoitov Cc: Andrii Nakryiko Cc: Daniel Borkmann Cc: Jiri Olsa Cc: John Fastabend Cc: KP Singh Cc: Martin KaFai Lau Cc: Nick Terrell Cc: Song Liu Cc: Stephane Eranian Link: http://lore.kernel.org/lkml/YulpPqXSOG0Q4J1o@kernel.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin

perf symbol: Correct address for bss symbols

2022-08-11T10:48:40Z

[ Upstream commit 2d86612aacb7805f72873691a2644d7279ed0630 ] When using 'perf mem' and 'perf c2c', an issue is observed that tool reports the wrong offset for global data symbols. This is a common issue on both x86 and Arm64 platforms. Let's see an example, for a test program, below is the disassembly for its .bss section which is dumped with objdump: ... Disassembly of section .bss: 0000000000004040 : ... 0000000000004080 : ... 00000000000040c0 : ... 0000000000004100 : ... First we used 'perf mem record' to run the test program and then used 'perf --debug verbose=4 mem report' to observe what's the symbol info for 'buf1' and 'buf2' structures. # ./perf mem record -e ldlat-loads,ldlat-stores -- false_sharing.exe 8 # ./perf --debug verbose=4 mem report ... dso__load_sym_internal: adjusting symbol: st_value: 0x40c0 sh_addr: 0x4040 sh_offset: 0x3028 symbol__new: buf2 0x30a8-0x30e8 ... dso__load_sym_internal: adjusting symbol: st_value: 0x4080 sh_addr: 0x4040 sh_offset: 0x3028 symbol__new: buf1 0x3068-0x30a8 ... The perf tool relies on libelf to parse symbols, in executable and shared object files, 'st_value' holds a virtual address; 'sh_addr' is the address at which section's first byte should reside in memory, and 'sh_offset' is the byte offset from the beginning of the file to the first byte in the section. The perf tool uses below formula to convert a symbol's memory address to a file address: file_address = st_value - sh_addr + sh_offset ^ ` Memory address We can see the final adjusted address ranges for buf1 and buf2 are [0x30a8-0x30e8) and [0x3068-0x30a8) respectively, apparently this is incorrect, in the code, the structure for 'buf1' and 'buf2' specifies compiler attribute with 64-byte alignment. The problem happens for 'sh_offset', libelf returns it as 0x3028 which is not 64-byte aligned, combining with disassembly, it's likely libelf doesn't respect the alignment for .bss section, therefore, it doesn't return the aligned value for 'sh_offset'. Suggested by Fangrui Song, ELF file contains program header which contains PT_LOAD segments, the fields p_vaddr and p_offset in PT_LOAD segments contain the execution info. A better choice for converting memory address to file address is using the formula: file_address = st_value - p_vaddr + p_offset This patch introduces elf_read_program_header() which returns the program header based on the passed 'st_value', then it uses the formula above to calculate the symbol file address; and the debugging log is updated respectively. After applying the change: # ./perf --debug verbose=4 mem report ... dso__load_sym_internal: adjusting symbol: st_value: 0x40c0 p_vaddr: 0x3d28 p_offset: 0x2d28 symbol__new: buf2 0x30c0-0x3100 ... dso__load_sym_internal: adjusting symbol: st_value: 0x4080 p_vaddr: 0x3d28 p_offset: 0x2d28 symbol__new: buf1 0x3080-0x30c0 ... Fixes: f17e04afaff84b5c ("perf report: Fix ELF symbol parsing") Reported-by: Chang Rui Suggested-by: Fangrui Song Signed-off-by: Leo Yan Acked-by: Namhyung Kim Cc: Alexander Shishkin Cc: Ian Rogers Cc: Ingo Molnar Cc: Jiri Olsa Cc: Mark Rutland Cc: Peter Zijlstra Link: https://lore.kernel.org/r/20220724060013.171050-2-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin

perf c2c: Fix sorting in percent_rmt_hitm_cmp()

2022-06-14T14:59:34Z

[ Upstream commit b24192a17337abbf3f44aaa75e15df14a2d0016e ] The function percent_rmt_hitm_cmp() wrongly uses local HITMs for sorting remote HITMs. Since this function is to sort cache lines for remote HITMs, this patch changes to use 'rmt_hitm' field for correct sorting. Fixes: 9cb3500afc0980c5 ("perf c2c report: Add hitm/store percent related sort keys") Signed-off-by: Leo Yan Acked-by: Namhyung Kim Cc: Alexander Shishkin Cc: Ingo Molnar Cc: Jiri Olsa Cc: Joe Mario Cc: Mark Rutland Cc: Peter Zijlstra Link: https://lore.kernel.org/r/20220530084253.750190-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin

perf jevents: Fix event syntax error caused by ExtSel

2022-06-14T14:59:26Z

[ Upstream commit f4df0dbbe62ee8e4405a57b27ccd54393971c773 ] In the origin code, when "ExtSel" is 1, the eventcode will change to "eventcode |= 1 << 21”. For event “UNC_Q_RxL_CREDITS_CONSUMED_VN0.DRS", its "ExtSel" is "1", its eventcode will change from 0x1E to 0x20001E, but in fact the eventcode should <=0x1FF, so this will cause the parse fail: # perf stat -e "UNC_Q_RxL_CREDITS_CONSUMED_VN0.DRS" -a sleep 0.1 event syntax error: '.._RxL_CREDITS_CONSUMED_VN0.DRS' \___ value too big for format, maximum is 511 On the perf kernel side, the kernel assumes the valid bits are continuous. It will adjust the 0x100 (bit 8 for perf tool) to bit 21 in HW. DEFINE_UNCORE_FORMAT_ATTR(event_ext, event, "config:0-7,21"); So the perf tool follows the kernel side and just set bit8 other than bit21. Fixes: fedb2b518239cbc0 ("perf jevents: Add support for parsing uncore json files") Reviewed-by: Kan Liang Signed-off-by: Xing Zhengjun Acked-by: Ian Rogers Cc: Adrian Hunter Cc: Alexander Shishkin Cc: Andi Kleen Cc: Ingo Molnar Cc: Jiri Olsa Cc: Peter Zijlstra Link: https://lore.kernel.org/r/20220525140410.1706851-1-zhengjun.xing@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin

perf c2c: Use stdio interface if slang is not supported

2022-06-14T14:59:26Z

[ Upstream commit c4040212bc97d16040712a410335f93bc94d2262 ] If the slang lib is not installed on the system, perf c2c tool disables TUI mode and roll back to use stdio mode; but the flag 'c2c.use_stdio' is missed to set true and thus it wrongly applies UI quirks in the function ui_quirks(). This commit forces to use stdio interface if slang is not supported, and it can avoid to apply the UI quirks and show the correct metric header. Before: ================================================= Shared Cache Line Distribution Pareto ================================================= ------------------------------------------------------------------------------- 0 0 0 99 0 0 0 0xaaaac17d6000 ------------------------------------------------------------------------------- 0.00% 0.00% 6.06% 0.00% 0.00% 0.00% 0x20 N/A 0 0xaaaac17c25ac 0 0 43 375 18469 2 [.] 0x00000000000025ac memstress memstress[25ac] 0 0.00% 0.00% 93.94% 0.00% 0.00% 0.00% 0x29 N/A 0 0xaaaac17c3e88 0 0 173 180 135 2 [.] 0x0000000000003e88 memstress memstress[3e88] 0 After: ================================================= Shared Cache Line Distribution Pareto ================================================= ------------------------------------------------------------------------------- 0 0 0 99 0 0 0 0xaaaac17d6000 ------------------------------------------------------------------------------- 0.00% 0.00% 6.06% 0.00% 0.00% 0.00% 0x20 N/A 0 0xaaaac17c25ac 0 0 43 375 18469 2 [.] 0x00000000000025ac memstress memstress[25ac] 0 0.00% 0.00% 93.94% 0.00% 0.00% 0.00% 0x29 N/A 0 0xaaaac17c3e88 0 0 173 180 135 2 [.] 0x0000000000003e88 memstress memstress[3e88] 0 Fixes: 5a1a99cd2e4e1557 ("perf c2c report: Add main TUI browser") Reported-by: Joe Mario Signed-off-by: Leo Yan Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lore.kernel.org/lkml/20220526145400.611249-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin

perf tests bp_account: Make global variable static

2022-06-06T06:24:21Z

[ Upstream commit cff20b3151ccab690715cb6cf0f5da5cccb32adf ] To fix the build with newer gccs, that without this patch exit with: LD /tmp/build/perf/tests/perf-in.o ld: /tmp/build/perf/tests/bp_account.o:/git/perf/tools/perf/tests/bp_account.c:22: multiple definition of `the_var'; /tmp/build/perf/tests/bp_signal.o:/git/perf/tools/perf/tests/bp_signal.c:38: first defined here make[4]: *** [/git/perf/tools/build/Makefile.build:145: /tmp/build/perf/tests/perf-in.o] Error 1 First noticed in fedora:rawhide/32 with: [perfbuilder@a5ff49d6e6e4 ~]$ gcc --version gcc (GCC) 10.0.1 20200216 (Red Hat 10.0.1-0.8) Reported-by: Jiri Olsa Cc: Adrian Hunter Cc: Namhyung Kim Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Daniel Díaz Signed-off-by: Greg Kroah-Hartman

perf bench: Share some global variables to fix build with gcc 10

2022-06-06T06:24:21Z

[ Upstream commit e4d9b04b973b2dbce7b42af95ea70d07da1c936d ] Noticed with gcc 10 (fedora rawhide) that those variables were not being declared as static, so end up with: ld: /tmp/build/perf/bench/epoll-wait.o:/git/perf/tools/perf/bench/epoll-wait.c:93: multiple definition of `end'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here ld: /tmp/build/perf/bench/epoll-wait.o:/git/perf/tools/perf/bench/epoll-wait.c:93: multiple definition of `start'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here ld: /tmp/build/perf/bench/epoll-wait.o:/git/perf/tools/perf/bench/epoll-wait.c:93: multiple definition of `runtime'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here ld: /tmp/build/perf/bench/epoll-ctl.o:/git/perf/tools/perf/bench/epoll-ctl.c:38: multiple definition of `end'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here ld: /tmp/build/perf/bench/epoll-ctl.o:/git/perf/tools/perf/bench/epoll-ctl.c:38: multiple definition of `start'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here ld: /tmp/build/perf/bench/epoll-ctl.o:/git/perf/tools/perf/bench/epoll-ctl.c:38: multiple definition of `runtime'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here make[4]: *** [/git/perf/tools/build/Makefile.build:145: /tmp/build/perf/bench/perf-in.o] Error 1 Prefix those with bench__ and add them to bench/bench.h, so that we can share those on the tools needing to access those variables from signal handlers. Acked-by: Thomas Gleixner Cc: Adrian Hunter Cc: Davidlohr Bueso Cc: Jiri Olsa Cc: Namhyung Kim Link: http://lore.kernel.org/lkml/20200303155811.GD13702@kernel.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Daniel Díaz Signed-off-by: Greg Kroah-Hartman

perf bench numa: Address compiler error on s390

2022-05-25T07:10:40Z

[ Upstream commit f8ac1c478424a9a14669b8cef7389b1e14e5229d ] The compilation on s390 results in this error: # make DEBUG=y bench/numa.o ... bench/numa.c: In function ‘__bench_numa’: bench/numa.c:1749:81: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size between 10 and 20 [-Werror=format-truncation=] 1749 | snprintf(tname, sizeof(tname), "process%d:thread%d", p, t); ^~ ... bench/numa.c:1749:64: note: directive argument in the range [-2147483647, 2147483646] ... # The maximum length of the %d replacement is 11 characters because of the negative sign. Therefore extend the array by two more characters. Output after: # make DEBUG=y bench/numa.o > /dev/null 2>&1; ll bench/numa.o -rw-r--r-- 1 root root 418320 May 19 09:11 bench/numa.o # Fixes: 3aff8ba0a4c9c919 ("perf bench numa: Avoid possible truncation when using snprintf()") Suggested-by: Namhyung Kim Signed-off-by: Thomas Richter Cc: Heiko Carstens Cc: Sumanth Korikkar Cc: Sven Schnelle Cc: Vasily Gorbik Link: https://lore.kernel.org/r/20220520081158.2990006-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin