user/sven/linux.git/tools/testing/ktest, branch v4.14.219

ktest: Add timeout for ssh sync testing

2020-03-20T09:54:16Z

commit 4d00fc477a2ce8b6d2b09fb34ef9fe9918e7d434 upstream. Before rebooting the box, a "ssh sync" is called to the test machine to see if it is alive or not. But if the test machine is in a partial state, that ssh may never actually finish, and the ktest test hangs. Add a 10 second timeout to the sync test, which will fail after 10 seconds and then cause the test to reboot the test machine. Cc: stable@vger.kernel.org Fixes: 6474ace999edd ("ktest.pl: Powercycle the box on reboot if no connection can be made") Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge tag 'ktest-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

2017-03-08T19:06:05Z

Pull ktest fixes from Steven Rostedt: "Greg Kroah-Hartman reported to me that the ktest of v4.11-rc1 locked up in an infinite loop while doing the make mrproper. Looking into the cause I noticed that a recent update to the function run_command (used for running all shell commands, including "make mrproper") changed the internal loop to use the function wait_for_input. The wait_for_input function uses select to look at two file descriptors. One is the file descriptor of the command it is running, the other is STDIN. The STDIN check was not checking the return status of the sysread call, and was also just writing a lot of data into syswrite without regard to the size of the data read. Changing the code to check the return status of sysread, and also to still process the passed in descriptor data without looping back to the select fixed Greg's problem. While looking at this code I also realized that the loop did not honor the timeout if STDIN always had input (or for some reason return error). this could prevent wait_for_input to timeout on the file descriptor it is suppose to be waiting for. That is fixed too" * tag 'ktest-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Make sure wait_for_input does honor the timeout ktest: Fix while loop in wait_for_input

ktest: Make sure wait_for_input does honor the timeout

2017-03-08T15:41:37Z

The function wait_for_input takes in a timeout, and even has a default timeout. But if for some reason the STDIN descriptor keeps sending in data, the function will never time out. The timout is to wait for the data from the passed in file descriptor, not for STDIN. Adding a test in the case where there's no data from the passed in file descriptor that checks to see if the timeout passed, will ensure that it will timeout properly even if there's input in STDIN. Signed-off-by: Steven Rostedt (VMware)

ktest: Fix while loop in wait_for_input

2017-03-08T15:16:17Z

The run_command function was changed to use the wait_for_input function to allow having a timeout if the command to run takes too much time. There was a bug in the wait_for_input where it could end up going into an infinite loop. There's two issues here. One is that the return value of the sysread wasn't used for the write (to write a proper size), and that it should continue processing the passed in file descriptor too even if there was input. There was no check for error, if for some reason STDIN returned an error, the function would go into an infinite loop and never exit. Reported-by: Greg Kroah-Hartman Tested-by: Greg Kroah-Hartman Fixes: 6e98d1b4415f ("ktest: Add timeout to ssh command") Signed-off-by: Steven Rostedt (VMware)

Merge tag 'ktest-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

2017-02-28T07:07:59Z

Pull ktest updates from Steven Rostedt: "These are various fixes that I have made and never got around to pushing. I've been asked to get the upstream repo back up-to-date" * tag 'ktest-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Add variable run_command_status to save status of commands executed ktest.pl: Powercycle the box on reboot if no connection can be made ktest: Add timeout to ssh command ktest: Fix child exit code processing ktest: Have POST_TEST run after the test has totally completed

ktest: Add variable run_command_status to save status of commands executed

2017-02-07T19:50:03Z

Create a variable called run_command_status that saves the status of the executed commands and can be used by other functions later to test for status. Signed-off-by: Steven Rostedt (VMware)

ktest.pl: Powercycle the box on reboot if no connection can be made

2017-02-07T17:23:38Z

When performing a reboot of the test box, try to ssh to it. If it can't connect for 5 seconds, then powercycle the box. This is useful because the reboot is done via ssh, and if you can't ssh to the box because it is hung, the reboot fails to reboot. Signed-off-by: Steven Rostedt (VMware)

ktest: Add timeout to ssh command

2017-02-07T17:23:38Z

Add a timeout to performing an ssh command. This will let testing if a machine is alive or not, or if something else may be amiss. A timeout can be passed to ssh, where ssh will fail if it does not complete within the given timeout. Signed-off-by: Steven Rostedt (VMware)

ktest: Fix child exit code processing

2017-02-07T17:05:25Z

The child_exit errno needs to be shifted by 8 bits to compare against the return values for the bisect variables. Fixes: c5dacb88f0a64 ("ktest: Allow overriding bisect test results") Cc: stable@vger.kernel.org Signed-off-by: Steven Rostedt (VMware)