user/sven/linux.git/tools, branch v4.19.234

x86/speculation: Rename RETPOLINE_AMD to RETPOLINE_LFENCE

2022-03-11T09:15:11Z

commit d45476d9832409371537013ebdd8dc1a7781f97a upstream. The RETPOLINE_AMD name is unfortunate since it isn't necessarily AMD only, in fact Hygon also uses it. Furthermore it will likely be sufficient for some Intel processors. Therefore rename the thing to RETPOLINE_LFENCE to better describe what it is. Add the spectre_v2=retpoline,lfence option as an alias to spectre_v2=retpoline,amd to preserve existing setups. However, the output of /sys/devices/system/cpu/vulnerabilities/spectre_v2 will be changed. [ bp: Fix typos, massage. ] Co-developed-by: Josh Poimboeuf Signed-off-by: Josh Poimboeuf Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Borislav Petkov Reviewed-by: Thomas Gleixner [fllinden@amazon.com: backported to 4.19] Signed-off-by: Frank van der Linden Signed-off-by: Greg Kroah-Hartman

libsubcmd: Fix use-after-free for realloc(..., 0)

2022-02-23T10:58:40Z

commit 52a9dab6d892763b2a8334a568bd4e2c1a6fde66 upstream. GCC 12 correctly reports a potential use-after-free condition in the xrealloc helper. Fix the warning by avoiding an implicit "free(ptr)" when size == 0: In file included from help.c:12: In function 'xrealloc', inlined from 'add_cmdname' at help.c:24:2: subcmd-util.h:56:23: error: pointer may be used after 'realloc' [-Werror=use-after-free] 56 | ret = realloc(ptr, size); | ^~~~~~~~~~~~~~~~~~ subcmd-util.h:52:21: note: call to 'realloc' here 52 | void *ret = realloc(ptr, size); | ^~~~~~~~~~~~~~~~~~ subcmd-util.h:58:31: error: pointer may be used after 'realloc' [-Werror=use-after-free] 58 | ret = realloc(ptr, 1); | ^~~~~~~~~~~~~~~ subcmd-util.h:52:21: note: call to 'realloc' here 52 | void *ret = realloc(ptr, size); | ^~~~~~~~~~~~~~~~~~ Fixes: 2f4ce5ec1d447beb ("perf tools: Finalize subcmd independence") Reported-by: Valdis Klētnieks Signed-off-by: Kees Kook Tested-by: Valdis Klētnieks Tested-by: Justin M. Forbes Acked-by: Josh Poimboeuf Cc: linux-hardening@vger.kernel.org Cc: Valdis Klētnieks Link: http://lore.kernel.org/lkml/20220213182443.4037039-1-keescook@chromium.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Greg Kroah-Hartman

selftests/zram: Adapt the situation that /dev/zram0 is being used

2022-02-23T10:58:38Z

[ Upstream commit 01dabed20573804750af5c7bf8d1598a6bf7bf6e ] If zram-generator package is installed and works, then we can not remove zram module because zram swap is being used. This case needs a clean zram environment, change this test by using hot_add/hot_remove interface. So even zram device is being used, we still can add zram device and remove them in cleanup. The two interface was introduced since kernel commit 6566d1a32bf7("zram: add dynamic device add/remove functionality") in v4.2-rc1. If kernel supports these two interface, we use hot_add/hot_remove to slove this problem, if not, just check whether zram is being used or built in, then skip it on old kernel. Signed-off-by: Yang Xu Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

selftests/zram01.sh: Fix compression ratio calculation

2022-02-23T10:58:38Z

[ Upstream commit d18da7ec3719559d6e74937266d0416e6c7e0b31 ] zram01 uses `free -m` to measure zram memory usage. The results are no sense because they are polluted by all running processes on the system. We Should only calculate the free memory delta for the current process. So use the third field of /sys/block/zram/mm_stat to measure memory usage instead. The file is available since kernel 4.1. orig_data_size(first): uncompressed size of data stored in this disk. compr_data_size(second): compressed size of data stored in this disk mem_used_total(third): the amount of memory allocated for this disk Also remove useless zram cleanup call in zram_fill_fs and so we don't need to cleanup zram twice if fails. Signed-off-by: Yang Xu Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

selftests/zram: Skip max_comp_streams interface on newer kernel

2022-02-23T10:58:38Z

[ Upstream commit fc4eb486a59d70bd35cf1209f0e68c2d8b979193 ] Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram has switched to per-cpu streams. Even kernel still keep this interface for some reasons, but writing to max_comp_stream doesn't take any effect. So skip it on newer kernel ie 4.7. The code that comparing kernel version is from xfstests testsuite ext4/053. Signed-off-by: Yang Xu Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

perf probe: Fix ppc64 'perf probe add events failed' case

2022-02-16T11:51:45Z

commit 4624f199327a704dd1069aca1c3cadb8f2a28c6f upstream. Because of commit bf794bf52a80c627 ("powerpc/kprobes: Fix kallsyms lookup across powerpc ABIv1 and ABIv2"), in ppc64 ABIv1, our perf command eliminates the need to use the prefix "." at the symbol name. But when the command "perf probe -a schedule" is executed on ppc64 ABIv1, it obtains two symbol address information through /proc/kallsyms, for example: cat /proc/kallsyms | grep -w schedule c000000000657020 T .schedule c000000000d4fdb8 D schedule The symbol "D schedule" is not a function symbol, and perf will print: "p:probe/schedule _text+13958584"Failed to write event: Invalid argument Therefore, when searching symbols from map and adding probe point for them, a symbol type check is added. If the type of symbol is not a function, skip it. Fixes: bf794bf52a80c627 ("powerpc/kprobes: Fix kallsyms lookup across powerpc ABIv1 and ABIv2") Signed-off-by: Zechuan Chen Acked-by: Masami Hiramatsu Cc: Alexander Shishkin Cc: Ingo Molnar Cc: Jianlin Lv Cc: Jin Yao Cc: Jiri Olsa Cc: Mark Rutland Cc: Michael Ellerman Cc: Namhyung Kim Cc: Naveen N. Rao Cc: Peter Zijlstra Cc: Ravi Bangoria Cc: Yang Jihong Link: https://lore.kernel.org/r/20211228111338.218602-1-chenzechuan1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo [sudip: adjust context] Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

selftests: futex: Use variable MAKE instead of make

2022-02-08T17:23:18Z

commit b9199181a9ef8252e47e207be8c23e1f50662620 upstream. Recursive make commands should always use the variable MAKE, not the explicit command name ‘make’. This has benefits and removes the following warning when multiple jobs are used for the build: make[2]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule. Fixes: a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT") Signed-off-by: Muhammad Usama Anjum Reviewed-by: André Almeida Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman

selftests/net: udpgso_bench_tx: fix dst ip argument

2022-01-05T11:34:59Z

[ Upstream commit 9c1952aeaa98b3cfc49e2a79cb2c7d6a674213e9 ] udpgso_bench_tx call setup_sockaddr() for dest address before parsing all arguments, if we specify "-p ${dst_port}" after "-D ${dst_ip}", then ${dst_port} will be ignored, and using default cfg_port 8000. This will cause test case "multiple GRO socks" failed in udpgro.sh. Setup sockaddr after parsing all arguments. Fixes: 3a687bef148d ("selftests: udp gso benchmark") Signed-off-by: Jianguo Wu Reviewed-by: Willem de Bruijn Link: https://lore.kernel.org/r/ff620d9f-5b52-06ab-5286-44b945453002@163.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

selftests: Calculate udpgso segment count without header adjustment

2022-01-05T11:34:58Z

[ Upstream commit 5471d5226c3b39b3d2f7011c082d5715795bd65c ] The below referenced commit correctly updated the computation of number of segments (gso_size) by using only the gso payload size and removing the header lengths. With this change the regression test started failing. Update the tests to match this new behavior. Both IPv4 and IPv6 tests are updated, as a separate patch in this series will update udp_v6_send_skb to match this change in udp_send_skb. Fixes: 158390e45612 ("udp: using datalen to cap max gso segments") Signed-off-by: Coco Li Reviewed-by: Willem de Bruijn Link: https://lore.kernel.org/r/20211223222441.2975883-2-lixiaoyan@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

tools build: Remove needless libpython-version feature check that breaks test-all fast path

2021-12-14T09:18:07Z

commit 3d1d57debee2d342a47615707588b96658fabb85 upstream. Since 66dfdff03d196e51 ("perf tools: Add Python 3 support") we don't use the tools/build/feature/test-libpython-version.c version in any Makefile feature check: $ find tools/ -type f | xargs grep feature-libpython-version $ The only place where this was used was removed in 66dfdff03d196e51: - ifneq ($(feature-libpython-version), 1) - $(warning Python 3 is not yet supported; please set) - $(warning PYTHON and/or PYTHON_CONFIG appropriately.) - $(warning If you also have Python 2 installed, then) - $(warning try something like:) - $(warning $(and ,)) - $(warning $(and ,) make PYTHON=python2) - $(warning $(and ,)) - $(warning Otherwise, disable Python support entirely:) - $(warning $(and ,)) - $(warning $(and ,) make NO_LIBPYTHON=1) - $(warning $(and ,)) - $(error $(and ,)) - else - LDFLAGS += $(PYTHON_EMBED_LDFLAGS) - EXTLIBS += $(PYTHON_EMBED_LIBADD) - LANG_BINDINGS += $(obj-perf)python/perf.so - $(call detected,CONFIG_LIBPYTHON) - endif And nowadays we either build with PYTHON=python3 or just install the python3 devel packages and perf will build against it. But the leftover feature-libpython-version check made the fast path feature detection to break in all cases except when python2 devel files were installed: $ rpm -qa | grep python.*devel python3-devel-3.9.7-1.fc34.x86_64 $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ; $ make -C tools/perf O=/tmp/build/perf install-bin make: Entering directory '/var/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j32' parallel build HOSTCC /tmp/build/perf/fixdep.o $ cat /tmp/build/perf/feature/test-all.make.output In file included from test-all.c:18: test-libpython-version.c:5:10: error: #error 5 | #error | ^~~~~ $ ldd ~/bin/perf | grep python libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007fda6dbcf000) $ As python3 is the norm these days, fix this by just removing the unused feature-libpython-version feature check, making the test-all fast path to work with the common case. With this: $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ; $ make -C tools/perf O=/tmp/build/perf install-bin |& head make: Entering directory '/var/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j32' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] $ ldd ~/bin/perf | grep python libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007f58800b0000) $ cat /tmp/build/perf/feature/test-all.make.output $ Reviewed-by: James Clark Fixes: 66dfdff03d196e51 ("perf tools: Add Python 3 support") Cc: Adrian Hunter Cc: Ian Rogers Cc: Jaroslav Škarvada Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lore.kernel.org/lkml/YaYmeeC6CS2b8OSz@kernel.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Greg Kroah-Hartman