user/sven/linux.git/tools, branch v6.1.107

tools: move alignment-related macros to new

2024-08-29T15:30:57Z

commit 10a04ff09bcc39e0044190ffe9f00f998f13647c upstream. Currently, tools have *ALIGN*() macros scattered across the unrelated headers, as there are only 3 of them and they were added separately each time on an as-needed basis. Anyway, let's make it more consistent with the kernel headers and allow using those macros outside of the mentioned headers. Create inside the tools/ folder and include it where needed. Signed-off-by: Yury Norov Signed-off-by: Alexander Lobakin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

selftests: net: more strict check in net_helper

2024-08-29T15:30:56Z

commit a71d0908e32f3dd41e355d83eeadd44d94811fd6 upstream. The helper waiting for a listener port can match any socket whose hexadecimal representation of source or destination addresses matches that of the given port. Additionally, any socket state is accepted. All the above can let the helper return successfully before the relevant listener is actually ready, with unexpected results. So far I could not find any related failure in the netdev CI, but the next patch is going to make the critical event more easily reproducible. Address the issue matching the port hex only vs the relevant socket field and additionally checking the socket state for TCP sockets. Fixes: 3bdd9fd29cb0 ("selftests/net: synchronize udpgro tests' tx and rx connection") Signed-off-by: Paolo Abeni Link: https://lore.kernel.org/r/192b3dbc443d953be32991d1b0ca432bd4c65008.1707731086.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: change maximum number of UDP segments to 128

2024-08-29T15:30:56Z

commit 1382e3b6a3500c245e5278c66d210c02926f804f upstream. The commit fc8b2a619469 ("net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation") adds check of potential number of UDP segments vs UDP_MAX_SEGMENTS in linux/virtio_net.h. After this change certification test of USO guest-to-guest transmit on Windows driver for virtio-net device fails, for example with packet size of ~64K and mss of 536 bytes. In general the USO should not be more restrictive than TSO. Indeed, in case of unreasonably small mss a lot of segments can cause queue overflow and packet loss on the destination. Limit of 128 segments is good for any practical purpose, with minimal meaningful mss of 536 the maximal UDP packet will be divided to ~120 segments. The number of segments for UDP packets is validated vs UDP_MAX_SEGMENTS also in udp.c (v4,v6), this does not affect quest-to-guest path but does affect packets sent to host, for example. It is important to mention that UDP_MAX_SEGMENTS is kernel-only define and not available to user mode socket applications. In order to request MSS smaller than MTU the applications just uses setsockopt with SOL_UDP and UDP_SEGMENT and there is no limitations on socket API level. Fixes: fc8b2a619469 ("net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation") Signed-off-by: Yuri Benditovich Reviewed-by: Willem de Bruijn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

selftests: udpgro: report error when receive failed

2024-08-29T15:30:44Z

[ Upstream commit 7167395a4be7930ecac6a33b4e54d7e3dd9ee209 ] Currently, we only check the latest senders's exit code. If the receiver report failed, it is not recoreded. Fix it by checking the exit code of all the involved processes. Before: bad GRO lookup ok multiple GRO socks ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520 ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520 failed $ echo $? 0 After: bad GRO lookup ok multiple GRO socks ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520 ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520 failed $ echo $? 1 Fixes: 3327a9c46352 ("selftests: add functionals test for UDP GRO") Suggested-by: Paolo Abeni Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

selftests/net: synchronize udpgro tests' tx and rx connection

2024-08-29T15:30:44Z

[ Upstream commit 3bdd9fd29cb0f136b307559a19c107210ad5c314 ] The sockets used by udpgso_bench_tx aren't always ready when udpgso_bench_tx transmits packets. This issue is more prevalent in -rt kernels, but can occur in both. Replace the hacky sleep calls with a function that checks whether the ports in the namespace are ready for use. Suggested-by: Paolo Abeni Signed-off-by: Lucas Karpinski Reviewed-by: Willem de Bruijn Signed-off-by: David S. Miller Stable-dep-of: 7167395a4be7 ("selftests: udpgro: report error when receive failed") Signed-off-by: Sasha Levin

tc-testing: don't access non-existent variable on exception

2024-08-29T15:30:43Z

[ Upstream commit a0c9fe5eecc97680323ee83780ea3eaf440ba1b7 ] Since commit 255c1c7279ab ("tc-testing: Allow test cases to be skipped") the variable test_ordinal doesn't exist in call_pre_case(). So it should not be accessed when an exception occurs. This resolves the following splat: ... During handling of the above exception, another exception occurred: Traceback (most recent call last): File ".../tdc.py", line 1028, in main() File ".../tdc.py", line 1022, in main set_operation_mode(pm, parser, args, remaining) File ".../tdc.py", line 966, in set_operation_mode catresults = test_runner_serial(pm, args, alltests) File ".../tdc.py", line 642, in test_runner_serial (index, tsr) = test_runner(pm, args, alltests) File ".../tdc.py", line 536, in test_runner res = run_one_test(pm, args, index, tidx) File ".../tdc.py", line 419, in run_one_test pm.call_pre_case(tidx) File ".../tdc.py", line 146, in call_pre_case print('test_ordinal is {}'.format(test_ordinal)) NameError: name 'test_ordinal' is not defined Fixes: 255c1c7279ab ("tc-testing: Allow test cases to be skipped") Signed-off-by: Simon Horman Acked-by: Jamal Hadi Salim Link: https://patch.msgid.link/20240815-tdc-test-ordinal-v1-1-0255c122a427@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bpf: Replace bpf_lpm_trie_key 0-length array with flexible array

2024-08-29T15:30:22Z

[ Upstream commit 896880ff30866f386ebed14ab81ce1ad3710cfc4 ] Replace deprecated 0-length array in struct bpf_lpm_trie_key with flexible array. Found with GCC 13: ../kernel/bpf/lpm_trie.c:207:51: warning: array subscript i is outside array bounds of 'const __u8[0]' {aka 'const unsigned char[]'} [-Warray-bounds=] 207 | *(__be16 *)&key->data[i]); | ^~~~~~~~~~~~~ ../include/uapi/linux/swab.h:102:54: note: in definition of macro '__swab16' 102 | #define __swab16(x) (__u16)__builtin_bswap16((__u16)(x)) | ^ ../include/linux/byteorder/generic.h:97:21: note: in expansion of macro '__be16_to_cpu' 97 | #define be16_to_cpu __be16_to_cpu | ^~~~~~~~~~~~~ ../kernel/bpf/lpm_trie.c:206:28: note: in expansion of macro 'be16_to_cpu' 206 | u16 diff = be16_to_cpu(*(__be16 *)&node->data[i] ^ | ^~~~~~~~~~~ In file included from ../include/linux/bpf.h:7: ../include/uapi/linux/bpf.h:82:17: note: while referencing 'data' 82 | __u8 data[0]; /* Arbitrary size */ | ^~~~ And found at run-time under CONFIG_FORTIFY_SOURCE: UBSAN: array-index-out-of-bounds in kernel/bpf/lpm_trie.c:218:49 index 0 is out of range for type '__u8 [*]' Changing struct bpf_lpm_trie_key is difficult since has been used by userspace. For example, in Cilium: struct egress_gw_policy_key { struct bpf_lpm_trie_key lpm_key; __u32 saddr; __u32 daddr; }; While direct references to the "data" member haven't been found, there are static initializers what include the final member. For example, the "{}" here: struct egress_gw_policy_key in_key = { .lpm_key = { 32 + 24, {} }, .saddr = CLIENT_IP, .daddr = EXTERNAL_SVC_IP & 0Xffffff, }; To avoid the build time and run time warnings seen with a 0-sized trailing array for struct bpf_lpm_trie_key, introduce a new struct that correctly uses a flexible array for the trailing bytes, struct bpf_lpm_trie_key_u8. As part of this, include the "header" portion (which is just the "prefixlen" member), so it can be used by anything building a bpf_lpr_trie_key that has trailing members that aren't a u8 flexible array (like the self-test[1]), which is named struct bpf_lpm_trie_key_hdr. Unfortunately, C++ refuses to parse the __struct_group() helper, so it is not possible to define struct bpf_lpm_trie_key_hdr directly in struct bpf_lpm_trie_key_u8, so we must open-code the union directly. Adjust the kernel code to use struct bpf_lpm_trie_key_u8 through-out, and for the selftest to use struct bpf_lpm_trie_key_hdr. Add a comment to the UAPI header directing folks to the two new options. Reported-by: Mark Rutland Signed-off-by: Kees Cook Signed-off-by: Daniel Borkmann Acked-by: Gustavo A. R. Silva Closes: https://paste.debian.net/hidden/ca500597/ Link: https://lore.kernel.org/all/202206281009.4332AA33@keescook/ [1] Link: https://lore.kernel.org/bpf/20240222155612.it.533-kees@kernel.org Stable-dep-of: 59f2f841179a ("bpf: Avoid kfree_rcu() under lock in bpf_lpm_trie.") Signed-off-by: Sasha Levin

rtla/osnoise: Prevent NULL dereference in error handling

2024-08-29T15:30:15Z

commit 90574d2a675947858b47008df8d07f75ea50d0d0 upstream. If the "tool->data" allocation fails then there is no need to call osnoise_free_top() and, in fact, doing so will lead to a NULL dereference. Cc: stable@vger.kernel.org Cc: John Kacur Cc: "Luis Claudio R. Goncalves" Cc: Clark Williams Fixes: 1eceb2fc2ca5 ("rtla/osnoise: Add osnoise top mode") Link: https://lore.kernel.org/f964ed1f-64d2-4fde-ad3e-708331f8f358@stanley.mountain Signed-off-by: Dan Carpenter Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman

fix bitmap corruption on close_range() with CLOSE_RANGE_UNSHARE

2024-08-29T15:30:15Z

commit 9a2fa1472083580b6c66bdaf291f591e1170123a upstream. copy_fd_bitmaps(new, old, count) is expected to copy the first count/BITS_PER_LONG bits from old->full_fds_bits[] and fill the rest with zeroes. What it does is copying enough words (BITS_TO_LONGS(count/BITS_PER_LONG)), then memsets the rest. That works fine, *if* all bits past the cutoff point are clear. Otherwise we are risking garbage from the last word we'd copied. For most of the callers that is true - expand_fdtable() has count equal to old->max_fds, so there's no open descriptors past count, let alone fully occupied words in ->open_fds[], which is what bits in ->full_fds_bits[] correspond to. The other caller (dup_fd()) passes sane_fdtable_size(old_fdt, max_fds), which is the smallest multiple of BITS_PER_LONG that covers all opened descriptors below max_fds. In the common case (copying on fork()) max_fds is ~0U, so all opened descriptors will be below it and we are fine, by the same reasons why the call in expand_fdtable() is safe. Unfortunately, there is a case where max_fds is less than that and where we might, indeed, end up with junk in ->full_fds_bits[] - close_range(from, to, CLOSE_RANGE_UNSHARE) with * descriptor table being currently shared * 'to' being above the current capacity of descriptor table * 'from' being just under some chunk of opened descriptors. In that case we end up with observably wrong behaviour - e.g. spawn a child with CLONE_FILES, get all descriptors in range 0..127 open, then close_range(64, ~0U, CLOSE_RANGE_UNSHARE) and watch dup(0) ending up with descriptor #128, despite #64 being observably not open. The minimally invasive fix would be to deal with that in dup_fd(). If this proves to add measurable overhead, we can go that way, but let's try to fix copy_fd_bitmaps() first. * new helper: bitmap_copy_and_expand(to, from, bits_to_copy, size). * make copy_fd_bitmaps() take the bitmap size in words, rather than bits; it's 'count' argument is always a multiple of BITS_PER_LONG, so we are not losing any information, and that way we can use the same helper for all three bitmaps - compiler will see that count is a multiple of BITS_PER_LONG for the large ones, so it'll generate plain memcpy()+memset(). Reproducer added to tools/testing/selftests/core/close_range_test.c Cc: stable@vger.kernel.org Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman

bitmap: introduce generic optimized bitmap_size()

2024-08-29T15:30:14Z

commit a37fbe666c016fd89e4460d0ebfcea05baba46dc upstream. The number of times yet another open coded `BITS_TO_LONGS(nbits) * sizeof(long)` can be spotted is huge. Some generic helper is long overdue. Add one, bitmap_size(), but with one detail. BITS_TO_LONGS() uses DIV_ROUND_UP(). The latter works well when both divident and divisor are compile-time constants or when the divisor is not a pow-of-2. When it is however, the compilers sometimes tend to generate suboptimal code (GCC 13): 48 83 c0 3f add $0x3f,%rax 48 c1 e8 06 shr $0x6,%rax 48 8d 14 c5 00 00 00 00 lea 0x0(,%rax,8),%rdx %BITS_PER_LONG is always a pow-2 (either 32 or 64), but GCC still does full division of `nbits + 63` by it and then multiplication by 8. Instead of BITS_TO_LONGS(), use ALIGN() and then divide by 8. GCC: 8d 50 3f lea 0x3f(%rax),%edx c1 ea 03 shr $0x3,%edx 81 e2 f8 ff ff 1f and $0x1ffffff8,%edx Now it shifts `nbits + 63` by 3 positions (IOW performs fast division by 8) and then masks bits[2:0]. bloat-o-meter: add/remove: 0/0 grow/shrink: 20/133 up/down: 156/-773 (-617) Clang does it better and generates the same code before/after starting from -O1, except that with the ALIGN() approach it uses %edx and thus still saves some bytes: add/remove: 0/0 grow/shrink: 9/133 up/down: 18/-538 (-520) Note that we can't expand DIV_ROUND_UP() by adding a check and using this approach there, as it's used in array declarations where expressions are not allowed. Add this helper to tools/ as well. Reviewed-by: Przemek Kitszel Acked-by: Yury Norov Signed-off-by: Alexander Lobakin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman