user/sven/linux.git/virt/kvm, branch v4.19.187

KVM: arm64: Fix exclusive limit for IPA size

2021-03-17T15:43:51Z

Commit 262b003d059c6671601a19057e9fe1a5e7f23722 upstream. When registering a memslot, we check the size and location of that memslot against the IPA size to ensure that we can provide guest access to the whole of the memory. Unfortunately, this check rejects memslot that end-up at the exact limit of the addressing capability for a given IPA size. For example, it refuses the creation of a 2GB memslot at 0x8000000 with a 32bit IPA space. Fix it by relaxing the check to accept a memslot reaching the limit of the IPA space. Fixes: c3058d5da222 ("arm/arm64: KVM: Ensure memslots are within KVM_PHYS_SIZE") Reviewed-by: Eric Auger Signed-off-by: Marc Zyngier Cc: stable@vger.kernel.org # 4.4, 4.9, 4.14, 4.19 Reviewed-by: Andrew Jones Link: https://lore.kernel.org/r/20210311100016.3830038-3-maz@kernel.org Signed-off-by: Greg Kroah-Hartman

kvm: check tlbs_dirty directly

2021-02-23T14:01:00Z

commit 88bf56d04bc3564542049ec4ec168a8b60d0b48c upstream In kvm_mmu_notifier_invalidate_range_start(), tlbs_dirty is used as: need_tlb_flush |= kvm->tlbs_dirty; with need_tlb_flush's type being int and tlbs_dirty's type being long. It means that tlbs_dirty is always used as int and the higher 32 bits is useless. We need to check tlbs_dirty in a correct way and this change checks it directly without propagating it to need_tlb_flush. Note: it's _extremely_ unlikely this neglecting of higher 32 bits can cause problems in practice. It would require encountering tlbs_dirty on a 4 billion count boundary, and KVM would need to be using shadow paging or be running a nested guest. Cc: stable@vger.kernel.org Fixes: a4ee1ca4a36e ("KVM: MMU: delay flush all tlbs on sync_page path") Signed-off-by: Lai Jiangshan Message-Id: <20201217154118.16497-1-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini [sudip: adjust context] Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

KVM: arm64: vgic-v3: Drop the reporting of GICR_TYPER.Last for userspace

2020-12-02T07:48:07Z

commit 23bde34771f1ea92fb5e6682c0d8c04304d34b3b upstream. It was recently reported that if GICR_TYPER is accessed before the RD base address is set, we'll suffer from the unset @rdreg dereferencing. Oops... gpa_t last_rdist_typer = rdreg->base + GICR_TYPER + (rdreg->free_index - 1) * KVM_VGIC_V3_REDIST_SIZE; It's "expected" that users will access registers in the redistributor if the RD has been properly configured (e.g., the RD base address is set). But it hasn't yet been covered by the existing documentation. Per discussion on the list [1], the reporting of the GICR_TYPER.Last bit for userspace never actually worked. And it's difficult for us to emulate it correctly given that userspace has the flexibility to access it any time. Let's just drop the reporting of the Last bit for userspace for now (userspace should have full knowledge about it anyway) and it at least prevents kernel from panic ;-) [1] https://lore.kernel.org/kvmarm/c20865a267e44d1e2c0d52ce4e012263@kernel.org/ Fixes: ba7b3f1275fd ("KVM: arm/arm64: Revisit Redistributor TYPER last bit computation") Reported-by: Keqian Zhu Signed-off-by: Zenghui Yu Signed-off-by: Marc Zyngier Reviewed-by: Eric Auger Link: https://lore.kernel.org/r/20201117151629.1738-1-yuzenghui@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

KVM: arm64: Assume write fault on S1PTW permission fault on instruction fetch

2020-10-01T11:14:54Z

commit c4ad98e4b72cb5be30ea282fce935248f2300e62 upstream. KVM currently assumes that an instruction abort can never be a write. This is in general true, except when the abort is triggered by a S1PTW on instruction fetch that tries to update the S1 page tables (to set AF, for example). This can happen if the page tables have been paged out and brought back in without seeing a direct write to them (they are thus marked read only), and the fault handling code will make the PT executable(!) instead of writable. The guest gets stuck forever. In these conditions, the permission fault must be considered as a write so that the Stage-1 update can take place. This is essentially the I-side equivalent of the problem fixed by 60e21a0ef54c ("arm64: KVM: Take S1 walks into account when determining S2 write faults"). Update kvm_is_write_fault() to return true on IABT+S1PTW, and introduce kvm_vcpu_trap_is_exec_fault() that only return true when no faulting on a S1 fault. Additionally, kvm_vcpu_dabt_iss1tw() is renamed to kvm_vcpu_abt_iss1tw(), as the above makes it plain that it isn't specific to data abort. Signed-off-by: Marc Zyngier Reviewed-by: Will Deacon Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200915104218.1284701-2-maz@kernel.org Signed-off-by: Greg Kroah-Hartman

KVM: arm64: vgic-its: Fix memory leak on the error path of vgic_add_lpi()

2020-10-01T11:14:42Z

[ Upstream commit 57bdb436ce869a45881d8aa4bc5dac8e072dd2b6 ] If we're going to fail out the vgic_add_lpi(), let's make sure the allocated vgic_irq memory is also freed. Though it seems that both cases are unlikely to fail. Signed-off-by: Zenghui Yu Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20200414030349.625-3-yuzenghui@huawei.com Signed-off-by: Sasha Levin

KVM: fix overflow of zero page refcount with ksm running

2020-10-01T11:14:32Z

[ Upstream commit 7df003c85218b5f5b10a7f6418208f31e813f38f ] We are testing Virtual Machine with KSM on v5.4-rc2 kernel, and found the zero_page refcount overflow. The cause of refcount overflow is increased in try_async_pf (get_user_page) without being decreased in mmu_set_spte() while handling ept violation. In kvm_release_pfn_clean(), only unreserved page will call put_page. However, zero page is reserved. So, as well as creating and destroy vm, the refcount of zero page will continue to increase until it overflows. step1: echo 10000 > /sys/kernel/pages_to_scan/pages_to_scan echo 1 > /sys/kernel/pages_to_scan/run echo 1 > /sys/kernel/pages_to_scan/use_zero_pages step2: just create several normal qemu kvm vms. And destroy it after 10s. Repeat this action all the time. After a long period of time, all domains hang because of the refcount of zero page overflow. Qemu print error log as follow: â€¦ error: kvm run failed Bad address EAX=00006cdc EBX=00000008 ECX=80202001 EDX=078bfbfd ESI=ffffffff EDI=00000000 EBP=00000008 ESP=00006cc4 EIP=000efd75 EFL=00010002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0 ES =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] CS =0008 00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA] SS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] DS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] FS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] GS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy GDT= 000f7070 00000037 IDT= 000f70ae 00000000 CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000 DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000 DR6=00000000ffff0ff0 DR7=0000000000000400 EFER=0000000000000000 Code=00 01 00 00 00 e9 e8 00 00 00 c7 05 4c 55 0f 00 01 00 00 00 <8b> 35 00 00 01 00 8b 3d 04 00 01 00 b8 d8 d3 00 00 c1 e0 08 0c ea a3 00 00 01 00 c7 05 04 â€¦ Meanwhile, a kernel warning is departed. [40914.836375] WARNING: CPU: 3 PID: 82067 at ./include/linux/mm.h:987 try_get_page+0x1f/0x30 [40914.836412] CPU: 3 PID: 82067 Comm: CPU 0/KVM Kdump: loaded Tainted: G OE 5.2.0-rc2 #5 [40914.836415] RIP: 0010:try_get_page+0x1f/0x30 [40914.836417] Code: 40 00 c3 0f 1f 84 00 00 00 00 00 48 8b 47 08 a8 01 75 11 8b 47 34 85 c0 7e 10 f0 ff 47 34 b8 01 00 00 00 c3 48 8d 78 ff eb e9 <0f> 0b 31 c0 c3 66 90 66 2e 0f 1f 84 00 0 0 00 00 00 48 8b 47 08 a8 [40914.836418] RSP: 0018:ffffb4144e523988 EFLAGS: 00010286 [40914.836419] RAX: 0000000080000000 RBX: 0000000000000326 RCX: 0000000000000000 [40914.836420] RDX: 0000000000000000 RSI: 00004ffdeba10000 RDI: ffffdf07093f6440 [40914.836421] RBP: ffffdf07093f6440 R08: 800000424fd91225 R09: 0000000000000000 [40914.836421] R10: ffff9eb41bfeebb8 R11: 0000000000000000 R12: ffffdf06bbd1e8a8 [40914.836422] R13: 0000000000000080 R14: 800000424fd91225 R15: ffffdf07093f6440 [40914.836423] FS: 00007fb60ffff700(0000) GS:ffff9eb4802c0000(0000) knlGS:0000000000000000 [40914.836425] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [40914.836426] CR2: 0000000000000000 CR3: 0000002f220e6002 CR4: 00000000003626e0 [40914.836427] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [40914.836427] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [40914.836428] Call Trace: [40914.836433] follow_page_pte+0x302/0x47b [40914.836437] __get_user_pages+0xf1/0x7d0 [40914.836441] ? irq_work_queue+0x9/0x70 [40914.836443] get_user_pages_unlocked+0x13f/0x1e0 [40914.836469] __gfn_to_pfn_memslot+0x10e/0x400 [kvm] [40914.836486] try_async_pf+0x87/0x240 [kvm] [40914.836503] tdp_page_fault+0x139/0x270 [kvm] [40914.836523] kvm_mmu_page_fault+0x76/0x5e0 [kvm] [40914.836588] vcpu_enter_guest+0xb45/0x1570 [kvm] [40914.836632] kvm_arch_vcpu_ioctl_run+0x35d/0x580 [kvm] [40914.836645] kvm_vcpu_ioctl+0x26e/0x5d0 [kvm] [40914.836650] do_vfs_ioctl+0xa9/0x620 [40914.836653] ksys_ioctl+0x60/0x90 [40914.836654] __x64_sys_ioctl+0x16/0x20 [40914.836658] do_syscall_64+0x5b/0x180 [40914.836664] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [40914.836666] RIP: 0033:0x7fb61cb6bfc7 Signed-off-by: LinFeng Signed-off-by: Zhuang Yanying Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin

KVM: arm/arm64: vgic: Fix potential double free dist->spis in __kvm_vgic_destroy()

2020-10-01T11:14:29Z

[ Upstream commit 0bda9498dd45280e334bfe88b815ebf519602cc3 ] In kvm_vgic_dist_init() called from kvm_vgic_map_resources(), if dist->vgic_model is invalid, dist->spis will be freed without set dist->spis = NULL. And in vgicv2 resources clean up path, __kvm_vgic_destroy() will be called to free allocated resources. And dist->spis will be freed again in clean up chain because we forget to set dist->spis = NULL in kvm_vgic_dist_init() failed path. So double free would happen. Signed-off-by: Miaohe Lin Signed-off-by: Marc Zyngier Reviewed-by: Eric Auger Link: https://lore.kernel.org/r/1574923128-19956-1-git-send-email-linmiaohe@huawei.com Signed-off-by: Sasha Levin

KVM: fix memory leak in kvm_io_bus_unregister_dev()

2020-09-26T16:01:28Z

[ Upstream commit f65886606c2d3b562716de030706dfe1bea4ed5e ] when kmalloc() fails in kvm_io_bus_unregister_dev(), before removing the bus, we should iterate over all other devices linked to it and call kvm_iodevice_destructor() for them Fixes: 90db10434b16 ("KVM: kvm_io_bus_unregister_dev() should never fail") Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+f196caa45793d6374707@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=f196caa45793d6374707 Signed-off-by: Rustam Kovhaev Reviewed-by: Vitaly Kuznetsov Message-Id: <20200907185535.233114-1-rkovhaev@gmail.com> Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin

KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set

2020-08-26T08:31:07Z

commit b5331379bc62611d1026173a09c73573384201d9 upstream. When an MMU notifier call results in unmapping a range that spans multiple PGDs, we end up calling into cond_resched_lock() when crossing a PGD boundary, since this avoids running into RCU stalls during VM teardown. Unfortunately, if the VM is destroyed as a result of OOM, then blocking is not permitted and the call to the scheduler triggers the following BUG(): | BUG: sleeping function called from invalid context at arch/arm64/kvm/mmu.c:394 | in_atomic(): 1, irqs_disabled(): 0, non_block: 1, pid: 36, name: oom_reaper | INFO: lockdep is turned off. | CPU: 3 PID: 36 Comm: oom_reaper Not tainted 5.8.0 #1 | Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 | Call trace: | dump_backtrace+0x0/0x284 | show_stack+0x1c/0x28 | dump_stack+0xf0/0x1a4 | ___might_sleep+0x2bc/0x2cc | unmap_stage2_range+0x160/0x1ac | kvm_unmap_hva_range+0x1a0/0x1c8 | kvm_mmu_notifier_invalidate_range_start+0x8c/0xf8 | __mmu_notifier_invalidate_range_start+0x218/0x31c | mmu_notifier_invalidate_range_start_nonblock+0x78/0xb0 | __oom_reap_task_mm+0x128/0x268 | oom_reap_task+0xac/0x298 | oom_reaper+0x178/0x17c | kthread+0x1e4/0x1fc | ret_from_fork+0x10/0x30 Use the new 'flags' argument to kvm_unmap_hva_range() to ensure that we only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is set in the notifier flags. Cc: Fixes: 8b3405e345b5 ("kvm: arm/arm64: Fix locking for kvm_free_stage2_pgd") Cc: Marc Zyngier Cc: Suzuki K Poulose Cc: James Morse Signed-off-by: Will Deacon Message-Id: <20200811102725.7121-3-will@kernel.org> Signed-off-by: Paolo Bonzini [will: Backport to 4.19; use 'blockable' instead of non-existent MMU_NOTIFIER_RANGE_BLOCKABLE flag] Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman

KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()

2020-08-26T08:31:07Z

commit fdfe7cbd58806522e799e2a50a15aee7f2cbb7b6 upstream. The 'flags' field of 'struct mmu_notifier_range' is used to indicate whether invalidate_range_{start,end}() are permitted to block. In the case of kvm_mmu_notifier_invalidate_range_start(), this field is not forwarded on to the architecture-specific implementation of kvm_unmap_hva_range() and therefore the backend cannot sensibly decide whether or not to block. Add an extra 'flags' parameter to kvm_unmap_hva_range() so that architectures are aware as to whether or not they are permitted to block. Cc: Cc: Marc Zyngier Cc: Suzuki K Poulose Cc: James Morse Signed-off-by: Will Deacon Message-Id: <20200811102725.7121-2-will@kernel.org> Signed-off-by: Paolo Bonzini [will: Backport to 4.19; use 'blockable' instead of non-existent range flags] Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman