user/sven/linux.git/virt, branch v4.14.219

KVM: fix overflow of zero page refcount with ksm running

2020-10-01T11:12:33Z

[ Upstream commit 7df003c85218b5f5b10a7f6418208f31e813f38f ] We are testing Virtual Machine with KSM on v5.4-rc2 kernel, and found the zero_page refcount overflow. The cause of refcount overflow is increased in try_async_pf (get_user_page) without being decreased in mmu_set_spte() while handling ept violation. In kvm_release_pfn_clean(), only unreserved page will call put_page. However, zero page is reserved. So, as well as creating and destroy vm, the refcount of zero page will continue to increase until it overflows. step1: echo 10000 > /sys/kernel/pages_to_scan/pages_to_scan echo 1 > /sys/kernel/pages_to_scan/run echo 1 > /sys/kernel/pages_to_scan/use_zero_pages step2: just create several normal qemu kvm vms. And destroy it after 10s. Repeat this action all the time. After a long period of time, all domains hang because of the refcount of zero page overflow. Qemu print error log as follow: â€¦ error: kvm run failed Bad address EAX=00006cdc EBX=00000008 ECX=80202001 EDX=078bfbfd ESI=ffffffff EDI=00000000 EBP=00000008 ESP=00006cc4 EIP=000efd75 EFL=00010002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0 ES =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] CS =0008 00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA] SS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] DS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] FS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] GS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy GDT= 000f7070 00000037 IDT= 000f70ae 00000000 CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000 DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000 DR6=00000000ffff0ff0 DR7=0000000000000400 EFER=0000000000000000 Code=00 01 00 00 00 e9 e8 00 00 00 c7 05 4c 55 0f 00 01 00 00 00 <8b> 35 00 00 01 00 8b 3d 04 00 01 00 b8 d8 d3 00 00 c1 e0 08 0c ea a3 00 00 01 00 c7 05 04 â€¦ Meanwhile, a kernel warning is departed. [40914.836375] WARNING: CPU: 3 PID: 82067 at ./include/linux/mm.h:987 try_get_page+0x1f/0x30 [40914.836412] CPU: 3 PID: 82067 Comm: CPU 0/KVM Kdump: loaded Tainted: G OE 5.2.0-rc2 #5 [40914.836415] RIP: 0010:try_get_page+0x1f/0x30 [40914.836417] Code: 40 00 c3 0f 1f 84 00 00 00 00 00 48 8b 47 08 a8 01 75 11 8b 47 34 85 c0 7e 10 f0 ff 47 34 b8 01 00 00 00 c3 48 8d 78 ff eb e9 <0f> 0b 31 c0 c3 66 90 66 2e 0f 1f 84 00 0 0 00 00 00 48 8b 47 08 a8 [40914.836418] RSP: 0018:ffffb4144e523988 EFLAGS: 00010286 [40914.836419] RAX: 0000000080000000 RBX: 0000000000000326 RCX: 0000000000000000 [40914.836420] RDX: 0000000000000000 RSI: 00004ffdeba10000 RDI: ffffdf07093f6440 [40914.836421] RBP: ffffdf07093f6440 R08: 800000424fd91225 R09: 0000000000000000 [40914.836421] R10: ffff9eb41bfeebb8 R11: 0000000000000000 R12: ffffdf06bbd1e8a8 [40914.836422] R13: 0000000000000080 R14: 800000424fd91225 R15: ffffdf07093f6440 [40914.836423] FS: 00007fb60ffff700(0000) GS:ffff9eb4802c0000(0000) knlGS:0000000000000000 [40914.836425] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [40914.836426] CR2: 0000000000000000 CR3: 0000002f220e6002 CR4: 00000000003626e0 [40914.836427] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [40914.836427] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [40914.836428] Call Trace: [40914.836433] follow_page_pte+0x302/0x47b [40914.836437] __get_user_pages+0xf1/0x7d0 [40914.836441] ? irq_work_queue+0x9/0x70 [40914.836443] get_user_pages_unlocked+0x13f/0x1e0 [40914.836469] __gfn_to_pfn_memslot+0x10e/0x400 [kvm] [40914.836486] try_async_pf+0x87/0x240 [kvm] [40914.836503] tdp_page_fault+0x139/0x270 [kvm] [40914.836523] kvm_mmu_page_fault+0x76/0x5e0 [kvm] [40914.836588] vcpu_enter_guest+0xb45/0x1570 [kvm] [40914.836632] kvm_arch_vcpu_ioctl_run+0x35d/0x580 [kvm] [40914.836645] kvm_vcpu_ioctl+0x26e/0x5d0 [kvm] [40914.836650] do_vfs_ioctl+0xa9/0x620 [40914.836653] ksys_ioctl+0x60/0x90 [40914.836654] __x64_sys_ioctl+0x16/0x20 [40914.836658] do_syscall_64+0x5b/0x180 [40914.836664] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [40914.836666] RIP: 0033:0x7fb61cb6bfc7 Signed-off-by: LinFeng Signed-off-by: Zhuang Yanying Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin

KVM: fix memory leak in kvm_io_bus_unregister_dev()

2020-10-01T11:12:23Z

[ Upstream commit f65886606c2d3b562716de030706dfe1bea4ed5e ] when kmalloc() fails in kvm_io_bus_unregister_dev(), before removing the bus, we should iterate over all other devices linked to it and call kvm_iodevice_destructor() for them Fixes: 90db10434b16 ("KVM: kvm_io_bus_unregister_dev() should never fail") Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+f196caa45793d6374707@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=f196caa45793d6374707 Signed-off-by: Rustam Kovhaev Reviewed-by: Vitaly Kuznetsov Message-Id: <20200907185535.233114-1-rkovhaev@gmail.com> Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin

KVM: arm/arm64: Don't reschedule in unmap_stage2_range()

2020-08-26T08:30:00Z

Upstream commits fdfe7cbd5880 ("KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()") and b5331379bc62 ("KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set") fix a "sleeping from invalid context" BUG caused by unmap_stage2_range() attempting to reschedule when called on the OOM path. Unfortunately, these patches rely on the MMU notifier callback being passed knowledge about whether or not blocking is permitted, which was introduced in 4.19. Rather than backport this considerable amount of infrastructure just for KVM on arm, instead just remove the conditional reschedule. Cc: # v4.14 only Cc: Marc Zyngier Cc: Suzuki K Poulose Cc: James Morse Signed-off-by: Will Deacon Acked-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman

KVM: arm: vgic: Fix limit condition when writing to GICD_I[CS]ACTIVER

2020-05-20T06:16:58Z

commit 1c32ca5dc6d00012f0c964e5fdd7042fcc71efb1 upstream. When deciding whether a guest has to be stopped we check whether this is a private interrupt or not. Unfortunately, there's an off-by-one bug here, and we fail to recognize a whole range of interrupts as being global (GICv2 SPIs 32-63). Fix the condition from > to be >=. Cc: stable@vger.kernel.org Fixes: abd7229626b93 ("KVM: arm/arm64: Simplify active_change_prepare and plug race") Reported-by: André Przywara Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman

KVM: Check for a bad hva before dropping into the ghc slow path

2020-03-11T17:02:53Z

commit fcfbc617547fc6d9552cb6c1c563b6a90ee98085 upstream. When reading/writing using the guest/host cache, check for a bad hva before checking for a NULL memslot, which triggers the slow path for handing cross-page accesses. Because the memslot is nullified on error by __kvm_gfn_to_hva_cache_init(), if the bad hva is encountered after crossing into a new page, then the kvm_{read,write}_guest() slow path could potentially write/access the first chunk prior to detecting the bad hva. Arguably, performing a partial access is semantically correct from an architectural perspective, but that behavior is certainly not intended. In the original implementation, memslot was not explicitly nullified and therefore the partial access behavior varied based on whether the memslot itself was null, or if the hva was simply bad. The current behavior was introduced as a seemingly unintentional side effect in commit f1b9dd5eb86c ("kvm: Disallow wraparound in kvm_gfn_to_hva_cache_init"), which justified the change with "since some callers don't check the return code from this function, it sit seems prudent to clear ghc->memslot in the event of an error". Regardless of intent, the partial access is dependent on _not_ checking the result of the cache initialization, which is arguably a bug in its own right, at best simply weird. Fixes: 8f964525a121 ("KVM: Allow cross page reads and writes from cached translations.") Cc: Jim Mattson Cc: Andrew Honig Signed-off-by: Sean Christopherson Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman

KVM: arm/arm64: Fix young bit from mmu notifier

2020-02-14T21:32:23Z

commit cf2d23e0bac9f6b5cd1cba8898f5f05ead40e530 upstream. kvm_test_age_hva() is called upon mmu_notifier_test_young(), but wrong address range has been passed to handle_hva_to_gpa(). With the wrong address range, no young bits will be checked in handle_hva_to_gpa(). It means zero is always returned from mmu_notifier_test_young(). This fixes the issue by passing correct address range to the underly function handle_hva_to_gpa(), so that the hardware young (access) bit will be visited. Fixes: 35307b9a5f7e ("arm/arm64: KVM: Implement Stage-2 page aging") Signed-off-by: Gavin Shan Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20200121055659.19560-1-gshan@redhat.com Signed-off-by: Greg Kroah-Hartman

KVM: arm/arm64: vgic-its: Fix restoration of unmapped collections

2020-02-14T21:32:22Z

commit 8c58be34494b7f1b2adb446e2d8beeb90e5de65b upstream. Saving/restoring an unmapped collection is a valid scenario. For example this happens if a MAPTI command was sent, featuring an unmapped collection. At the moment the CTE fails to be restored. Only compare against the number of online vcpus if the rdist base is set. Fixes: ea1ad53e1e31a ("KVM: arm64: vgic-its: Collection table save/restore") Signed-off-by: Eric Auger Signed-off-by: Marc Zyngier Reviewed-by: Zenghui Yu Link: https://lore.kernel.org/r/20191213094237.19627-1-eric.auger@redhat.com Signed-off-by: Greg Kroah-Hartman

KVM: Play nice with read-only memslots when querying host page size

2020-02-14T21:32:20Z

[ Upstream commit 42cde48b2d39772dba47e680781a32a6c4b7dc33 ] Avoid the "writable" check in __gfn_to_hva_many(), which will always fail on read-only memslots due to gfn_to_hva() assuming writes. Functionally, this allows x86 to create large mappings for read-only memslots that are backed by HugeTLB mappings. Note, the changelog for commit 05da45583de9 ("KVM: MMU: large page support") states "If the largepage contains write-protected pages, a large pte is not used.", but "write-protected" refers to pages that are temporarily read-only, e.g. read-only memslots didn't even exist at the time. Fixes: 4d8b81abc47b ("KVM: introduce readonly memslot") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson [Redone using kvm_vcpu_gfn_to_memslot_prot. - Paolo] Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin

KVM: Use vcpu-specific gva->hva translation when querying host page size

2020-02-14T21:32:20Z

[ Upstream commit f9b84e19221efc5f493156ee0329df3142085f28 ] Use kvm_vcpu_gfn_to_hva() when retrieving the host page size so that the correct set of memslots is used when handling x86 page faults in SMM. Fixes: 54bf36aac520 ("KVM: x86: use vcpu-specific functions to read/write/translate GFNs") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin

KVM: arm64: Only sign-extend MMIO up to register width

2020-02-14T21:32:08Z

commit b6ae256afd32f96bec0117175b329d0dd617655e upstream. On AArch64 you can do a sign-extended load to either a 32-bit or 64-bit register, and we should only sign extend the register up to the width of the register as specified in the operation (by using the 32-bit Wn or 64-bit Xn register specifier). As it turns out, the architecture provides this decoding information in the SF ("Sixty-Four" -- how cute...) bit. Let's take advantage of this with the usual 32-bit/64-bit header file dance and do the right thing on AArch64 hosts. Signed-off-by: Christoffer Dall Signed-off-by: Marc Zyngier Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191212195055.5541-1-christoffer.dall@arm.com Signed-off-by: Greg Kroah-Hartman