sn9c102: sparse fixes

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>

2 files changed, 37 insertions, 17 deletions

diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h
index 8cb3457e778d..3e03ba6feea5 100644
--- a/drivers/media/video/sn9c102/sn9c102_devtable.h
+++ b/drivers/media/video/sn9c102/sn9c102_devtable.h
@@ -129,23 +129,23 @@ static const struct usb_device_id sn9c102_id_table[] = {
 };
 
 /*
-   Probing functions: on success, you must attach the sensor to the camera
-   by calling sn9c102_attach_sensor().
-   To enable the I2C communication, you might need to perform a really basic
-   initialization of the SN9C1XX chip.
-   Functions must return 0 on success, the appropriate error otherwise.
+   Add the probe functions to this table. Be sure to add the entry in the right
+   place, since, on failure, the next probing routine is called according to
+   the order of the list below, from top to bottom.
 */
-extern int sn9c102_probe_hv7131d(struct sn9c102_device* cam);
-extern int sn9c102_probe_hv7131r(struct sn9c102_device* cam);
-extern int sn9c102_probe_mi0343(struct sn9c102_device* cam);
-extern int sn9c102_probe_mi0360(struct sn9c102_device* cam);
-extern int sn9c102_probe_mt9v111(struct sn9c102_device *cam);
-extern int sn9c102_probe_ov7630(struct sn9c102_device* cam);
-extern int sn9c102_probe_ov7660(struct sn9c102_device* cam);
-extern int sn9c102_probe_pas106b(struct sn9c102_device* cam);
-extern int sn9c102_probe_pas202bcb(struct sn9c102_device* cam);
-extern int sn9c102_probe_tas5110c1b(struct sn9c102_device* cam);
-extern int sn9c102_probe_tas5110d(struct sn9c102_device* cam);
-extern int sn9c102_probe_tas5130d1b(struct sn9c102_device* cam);
+static int (*sn9c102_sensor_table[])(struct sn9c102_device*) = {
+	&sn9c102_probe_hv7131d, /* strong detection based on SENSOR ids */
+	&sn9c102_probe_hv7131r, /* strong detection based on SENSOR ids */
+	&sn9c102_probe_mi0343, /* strong detection based on SENSOR ids */
+	&sn9c102_probe_mi0360, /* strong detection based on SENSOR ids */
+	&sn9c102_probe_mt9v111, /* strong detection based on SENSOR ids */
+	&sn9c102_probe_pas106b, /* strong detection based on SENSOR ids */
+	&sn9c102_probe_pas202bcb, /* strong detection based on SENSOR ids */
+	&sn9c102_probe_ov7630, /* strong detection based on SENSOR ids */
+	&sn9c102_probe_ov7660, /* strong detection based on SENSOR ids */
+	&sn9c102_probe_tas5110c1b, /* detection based on USB pid/vid */
+	&sn9c102_probe_tas5110d, /* detection based on USB pid/vid */
+	&sn9c102_probe_tas5130d1b, /* detection based on USB pid/vid */
+};
 
 #endif /* _SN9C102_DEVTABLE_H_ */
diff --git a/drivers/media/video/sn9c102/sn9c102_sensor.h b/drivers/media/video/sn9c102/sn9c102_sensor.h
index 4af7382da5c5..f5ded2339dca 100644
--- a/drivers/media/video/sn9c102/sn9c102_sensor.h
+++ b/drivers/media/video/sn9c102/sn9c102_sensor.h
@@ -304,4 +304,24 @@ struct sn9c102_sensor {
 #define SN9C102_V4L2_CID_BAND_FILTER (V4L2_CID_PRIVATE_BASE + 5)
 #define SN9C102_V4L2_CID_BRIGHT_LEVEL (V4L2_CID_PRIVATE_BASE + 6)
 
+/*
+   Probing functions: on success, you must attach the sensor to the camera
+   by calling sn9c102_attach_sensor().
+   To enable the I2C communication, you might need to perform a really basic
+   initialization of the SN9C1XX chip.
+   Functions must return 0 on success, the appropriate error otherwise.
+*/
+extern int sn9c102_probe_hv7131d(struct sn9c102_device* cam);
+extern int sn9c102_probe_hv7131r(struct sn9c102_device* cam);
+extern int sn9c102_probe_mi0343(struct sn9c102_device* cam);
+extern int sn9c102_probe_mi0360(struct sn9c102_device* cam);
+extern int sn9c102_probe_mt9v111(struct sn9c102_device *cam);
+extern int sn9c102_probe_ov7630(struct sn9c102_device* cam);
+extern int sn9c102_probe_ov7660(struct sn9c102_device* cam);
+extern int sn9c102_probe_pas106b(struct sn9c102_device* cam);
+extern int sn9c102_probe_pas202bcb(struct sn9c102_device* cam);
+extern int sn9c102_probe_tas5110c1b(struct sn9c102_device* cam);
+extern int sn9c102_probe_tas5110d(struct sn9c102_device* cam);
+extern int sn9c102_probe_tas5130d1b(struct sn9c102_device* cam);
+
 #endif /* _SN9C102_SENSOR_H_ */