spi: rzv2h-rspi: move register writes out of rzv2h_rspi_setup_clock()

In preparation for caching the last requested transfer frequency, move
register writes outside of rzv2h_rspi_setup_clock().

The transfer list is iterated to determine the speed of the transfer
and the bits per word.

The speed of the transfer is used to compute SPR and BRDV inside
rzv2h_rspi_setup_clock().

BRDV and SPB are stored in the SPCMD register.

Move the transfer iteration earlier, move the SPR and BRDV writing out
of rzv2h_rspi_setup_clock(), consolidate writing BRDV and SPB into the
initial write to the SPCMD register.

Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Link: https://patch.msgid.link/20251119161434.595677-5-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

1 files changed, 25 insertions, 20 deletions

diff --git a/drivers/spi/spi-rzv2h-rspi.c b/drivers/spi/spi-rzv2h-rspi.c
index a1f17ec8727b..f02f25b98ec6 100644
--- a/drivers/spi/spi-rzv2h-rspi.c
+++ b/drivers/spi/spi-rzv2h-rspi.c
@@ -83,6 +83,8 @@ struct rzv2h_rspi_priv {
 	unsigned int bytes_per_word;
 	u32 freq;
 	u16 status;
+	u8 spr;
+	u8 brdv;
 };
 
 #define RZV2H_RSPI_TX(func, type)					\
@@ -263,8 +265,8 @@ static u32 rzv2h_rspi_setup_clock(struct rzv2h_rspi_priv *rspi, u32 hz)
 	return 0;
 
 clock_found:
-	rzv2h_rspi_reg_rmw(rspi, RSPI_SPCMD, RSPI_SPCMD_BRDV, brdv);
-	writeb(spr, rspi->base + RSPI_SPBR);
+	rspi->spr = spr;
+	rspi->brdv = brdv;
 
 	return rzv2h_rspi_calc_bitrate(tclk_rate, spr, brdv);
 }
@@ -283,6 +285,25 @@ static int rzv2h_rspi_prepare_message(struct spi_controller *ctlr,
 	/* Make sure SPCR.SPE is 0 before amending the configuration */
 	rzv2h_rspi_spe_disable(rspi);
 
+	list_for_each_entry(xfer, &message->transfers, transfer_list) {
+		if (!xfer->speed_hz)
+			continue;
+
+		speed_hz = min(xfer->speed_hz, speed_hz);
+		bits_per_word = xfer->bits_per_word;
+	}
+
+	if (speed_hz == U32_MAX)
+		return -EINVAL;
+
+	rspi->bytes_per_word = roundup_pow_of_two(BITS_TO_BYTES(bits_per_word));
+
+	rspi->freq = rzv2h_rspi_setup_clock(rspi, speed_hz);
+	if (!rspi->freq)
+		return -EINVAL;
+
+	writeb(rspi->spr, rspi->base + RSPI_SPBR);
+
 	/* Configure the device to work in "host" mode */
 	conf32 = RSPI_SPCR_MSTR;
 
@@ -301,6 +322,8 @@ static int rzv2h_rspi_prepare_message(struct spi_controller *ctlr,
 	conf32 = FIELD_PREP(RSPI_SPCMD_CPOL, !!(spi->mode & SPI_CPOL));
 	conf32 |= FIELD_PREP(RSPI_SPCMD_CPHA, !!(spi->mode & SPI_CPHA));
 	conf32 |= FIELD_PREP(RSPI_SPCMD_LSBF, !!(spi->mode & SPI_LSB_FIRST));
+	conf32 |= FIELD_PREP(RSPI_SPCMD_SPB, bits_per_word - 1);
+	conf32 |= FIELD_PREP(RSPI_SPCMD_BRDV, rspi->brdv);
 	conf32 |= FIELD_PREP(RSPI_SPCMD_SSLKP, 1);
 	conf32 |= FIELD_PREP(RSPI_SPCMD_SSLA, spi_get_chipselect(spi, 0));
 	writel(conf32, rspi->base + RSPI_SPCMD);
@@ -316,24 +339,6 @@ static int rzv2h_rspi_prepare_message(struct spi_controller *ctlr,
 
 	rzv2h_rspi_clear_fifos(rspi);
 
-	list_for_each_entry(xfer, &message->transfers, transfer_list) {
-		if (!xfer->speed_hz)
-			continue;
-
-		speed_hz = min(xfer->speed_hz, speed_hz);
-		bits_per_word = xfer->bits_per_word;
-	}
-
-	if (speed_hz == U32_MAX)
-		return -EINVAL;
-
-	rspi->bytes_per_word = roundup_pow_of_two(BITS_TO_BYTES(bits_per_word));
-	rzv2h_rspi_reg_rmw(rspi, RSPI_SPCMD, RSPI_SPCMD_SPB, bits_per_word - 1);
-
-	rspi->freq = rzv2h_rspi_setup_clock(rspi, speed_hz);
-	if (!rspi->freq)
-		return -EINVAL;
-
 	rzv2h_rspi_spe_enable(rspi);
 
 	return 0;