Merge tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextipvs/mainipvs/HEADipvs-next/mainipvs-next/HEADdavem/net-next/maindavem/net-next/HEAD

Pull networking updates from Paolo Abeni:
 "Core & protocols:

   - A significant effort all around the stack to guide the compiler to
     make the right choice when inlining code, to avoid unneeded calls
     for small helper and stack canary overhead in the fast-path.

     This generates better and faster code with very small or no text
     size increases, as in many cases the call generated more code than
     the actual inlined helper.

   - Extend AccECN implementation so that is now functionally complete,
     also allow the user-space enabling it on a per network namespace
     basis.

   - Add support for memory providers with large (above 4K) rx buffer.
     Paired with hw-gro, larger rx buffer sizes reduce the number of
     buffers traversing the stack, dincreasing single stream CPU usage
     by up to ~30%.

   - Do not add HBH header to Big TCP GSO packets. This simplifies the
     RX path, the TX path and the NIC drivers, and is possible because
     user-space taps can now interpret correctly such packets without
     the HBH hint.

   - Allow IPv6 routes to be configured with a gateway address that is
     resolved out of a different interface than the one specified,
     aligning IPv6 to IPv4 behavior.

   - Multi-queue aware sch_cake. This makes it possible to scale the
     rate shaper of sch_cake across multiple CPUs, while still enforcing
     a single global rate on the interface.

   - Add support for the nbcon (new buffer console) infrastructure to
     netconsole, enabling lock-free, priority-based console operations
     that are safer in crash scenarios.

   - Improve the TCP ipv6 output path to cache the flow information,
     saving cpu cycles, reducing cache line misses and stack use.

   - Improve netfilter packet tracker to resolve clashes for most
     protocols, avoiding unneeded drops on rare occasions.

   - Add IP6IP6 tunneling acceleration to the flowtable infrastructure.

   - Reduce tcp socket size by one cache line.

   - Notify neighbour changes atomically, avoiding inconsistencies
     between the notification sequence and the actual states sequence.

   - Add vsock namespace support, allowing complete isolation of vsocks
     across different network namespaces.

   - Improve xsk generic performances with cache-alignment-oriented
     optimizations.

   - Support netconsole automatic target recovery, allowing netconsole
     to reestablish targets when underlying low-level interface comes
     back online.

  Driver API:

   - Support for switching the working mode (automatic vs manual) of a
     DPLL device via netlink.

   - Introduce PHY ports representation to expose multiple front-facing
     media ports over a single MAC.

   - Introduce "rx-polarity" and "tx-polarity" device tree properties,
     to generalize polarity inversion requirements for differential
     signaling.

   - Add helper to create, prepare and enable managed clocks.

  Device drivers:

   - Add Huawei hinic3 PF etherner driver.

   - Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
     controller.

   - Add ethernet driver for MaxLinear MxL862xx switches

   - Remove parallel-port Ethernet driver.

   - Convert existing driver timestamp configuration reporting to
     hwtstamp_get and remove legacy ioctl().

   - Convert existing drivers to .get_rx_ring_count(), simplifing the RX
     ring count retrieval. Also remove the legacy fallback path.

   - Ethernet high-speed NICs:
      - Broadcom (bnxt, bng):
         - bnxt: add FW interface update to support FEC stats histogram
           and NVRAM defragmentation
         - bng: add TSO and H/W GRO support
      - nVidia/Mellanox (mlx5):
         - improve latency of channel restart operations, reducing the
           used H/W resources
         - add TSO support for UDP over GRE over VLAN
         - add flow counters support for hardware steering (HWS) rules
         - use a static memory area to store headers for H/W GRO,
           leading to 12% RX tput improvement
      - Intel (100G, ice, idpf):
         - ice: reorganizes layout of Tx and Rx rings for cacheline
           locality and utilizes __cacheline_group* macros on the new
           layouts
         - ice: introduces Synchronous Ethernet (SyncE) support
      - Meta (fbnic):
         - adds debugfs for firmware mailbox and tx/rx rings vectors

   - Ethernet virtual:
      - geneve: introduce GRO/GSO support for double UDP encapsulation

   - Ethernet NICs consumer, and embedded:
      - Synopsys (stmmac):
         - some code refactoring and cleanups
      - RealTek (r8169):
         - add support for RTL8127ATF (10G Fiber SFP)
         - add dash and LTR support
      - Airoha:
         - AN8811HB 2.5 Gbps phy support
      - Freescale (fec):
         - add XDP zero-copy support
      - Thunderbolt:
         - add get link setting support to allow bonding
      - Renesas:
         - add support for RZ/G3L GBETH SoC

   - Ethernet switches:
      - Maxlinear:
         - support R(G)MII slow rate configuration
         - add support for Intel GSW150
      - Motorcomm (yt921x):
         - add DCB/QoS support
      - TI:
         - icssm-prueth: support bridging (STP/RSTP) via the switchdev
           framework

   - Ethernet PHYs:
      - Realtek:
         - enable SGMII and 2500Base-X in-band auto-negotiation
         - simplify and reunify C22/C45 drivers
      - Micrel: convert bindings to DT schema

   - CAN:
      - move skb headroom content into skb extensions, making CAN
        metadata access more robust

   - CAN drivers:
      - rcar_canfd:
         - add support for FD-only mode
         - add support for the RZ/T2H SoC
      - sja1000: cleanup the CAN state handling

   - WiFi:
      - implement EPPKE/802.1X over auth frames support
      - split up drop reasons better, removing generic RX_DROP
      - additional FTM capabilities: 6 GHz support, supported number of
        spatial streams and supported number of LTF repetitions
      - better mac80211 iterators to enumerate resources
      - initial UHR (Wi-Fi 8) support for cfg80211/mac80211

   - WiFi drivers:
      - Qualcomm/Atheros:
         - ath11k: support for Channel Frequency Response measurement
         - ath12k: a significant driver refactor to support multi-wiphy
           devices and and pave the way for future device support in the
           same driver (rather than splitting to ath13k)
         - ath12k: support for the QCC2072 chipset
      - Intel:
         - iwlwifi: partial Neighbor Awareness Networking (NAN) support
         - iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
      - RealTek (rtw89):
         - preparations for RTL8922DE support

   - Bluetooth:
      - implement setsockopt(BT_PHY) to set the connection packet type/PHY
      - set link_policy on incoming ACL connections

   - Bluetooth drivers:
      - btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
      - btqca: add WCN6855 firmware priority selection feature"

* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
  bnge/bng_re: Add a new HSI
  net: macb: Fix tx/rx malfunction after phy link down and up
  af_unix: Fix memleak of newsk in unix_stream_connect().
  net: ti: icssg-prueth: Add optional dependency on HSR
  net: dsa: add basic initial driver for MxL862xx switches
  net: mdio: add unlocked mdiodev C45 bus accessors
  net: dsa: add tag format for MxL862xx switches
  dt-bindings: net: dsa: add MaxLinear MxL862xx
  selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
  octeontx2-pf: Unregister devlink on probe failure
  net: renesas: rswitch: fix forwarding offload statemachine
  ionic: Rate limit unknown xcvr type messages
  tcp: inet6_csk_xmit() optimization
  tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
  tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
  ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
  ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
  ipv6: use np->final in inet6_sk_rebuild_header()
  ipv6: add daddr/final storage in struct ipv6_pinfo
  net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
  ...

1 files changed, 28 insertions, 19 deletions

diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index d46ed9011ee5..69eed69f7f26 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -130,21 +130,30 @@ struct bt_voice {
 #define BT_RCVMTU		13
 #define BT_PHY			14
 
-#define BT_PHY_BR_1M_1SLOT	0x00000001
-#define BT_PHY_BR_1M_3SLOT	0x00000002
-#define BT_PHY_BR_1M_5SLOT	0x00000004
-#define BT_PHY_EDR_2M_1SLOT	0x00000008
-#define BT_PHY_EDR_2M_3SLOT	0x00000010
-#define BT_PHY_EDR_2M_5SLOT	0x00000020
-#define BT_PHY_EDR_3M_1SLOT	0x00000040
-#define BT_PHY_EDR_3M_3SLOT	0x00000080
-#define BT_PHY_EDR_3M_5SLOT	0x00000100
-#define BT_PHY_LE_1M_TX		0x00000200
-#define BT_PHY_LE_1M_RX		0x00000400
-#define BT_PHY_LE_2M_TX		0x00000800
-#define BT_PHY_LE_2M_RX		0x00001000
-#define BT_PHY_LE_CODED_TX	0x00002000
-#define BT_PHY_LE_CODED_RX	0x00004000
+#define BT_PHY_BR_1M_1SLOT	BIT(0)
+#define BT_PHY_BR_1M_3SLOT	BIT(1)
+#define BT_PHY_BR_1M_5SLOT	BIT(2)
+#define BT_PHY_EDR_2M_1SLOT	BIT(3)
+#define BT_PHY_EDR_2M_3SLOT	BIT(4)
+#define BT_PHY_EDR_2M_5SLOT	BIT(5)
+#define BT_PHY_EDR_3M_1SLOT	BIT(6)
+#define BT_PHY_EDR_3M_3SLOT	BIT(7)
+#define BT_PHY_EDR_3M_5SLOT	BIT(8)
+#define BT_PHY_LE_1M_TX		BIT(9)
+#define BT_PHY_LE_1M_RX		BIT(10)
+#define BT_PHY_LE_2M_TX		BIT(11)
+#define BT_PHY_LE_2M_RX		BIT(12)
+#define BT_PHY_LE_CODED_TX	BIT(13)
+#define BT_PHY_LE_CODED_RX	BIT(14)
+
+#define BT_PHY_BREDR_MASK	(BT_PHY_BR_1M_1SLOT | BT_PHY_BR_1M_3SLOT | \
+				 BT_PHY_BR_1M_5SLOT | BT_PHY_EDR_2M_1SLOT | \
+				 BT_PHY_EDR_2M_3SLOT | BT_PHY_EDR_2M_5SLOT | \
+				 BT_PHY_EDR_3M_1SLOT | BT_PHY_EDR_3M_3SLOT | \
+				 BT_PHY_EDR_3M_5SLOT)
+#define BT_PHY_LE_MASK		(BT_PHY_LE_1M_TX | BT_PHY_LE_1M_RX | \
+				 BT_PHY_LE_2M_TX | BT_PHY_LE_2M_RX | \
+				 BT_PHY_LE_CODED_TX | BT_PHY_LE_CODED_RX)
 
 #define BT_MODE			15
 
@@ -173,7 +182,7 @@ struct bt_iso_io_qos {
 	__u32 interval;
 	__u16 latency;
 	__u16 sdu;
-	__u8  phy;
+	__u8  phys;
 	__u8  rtn;
 };
 
@@ -212,9 +221,9 @@ struct bt_iso_qos {
 	};
 };
 
-#define BT_ISO_PHY_1M		0x01
-#define BT_ISO_PHY_2M		0x02
-#define BT_ISO_PHY_CODED	0x04
+#define BT_ISO_PHY_1M		BIT(0)
+#define BT_ISO_PHY_2M		BIT(1)
+#define BT_ISO_PHY_CODED	BIT(2)
 #define BT_ISO_PHY_ANY		(BT_ISO_PHY_1M | BT_ISO_PHY_2M | \
 				 BT_ISO_PHY_CODED)