Merge tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextdavem/net-next/maindavem/net-next/HEAD

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Replace busylock at the Tx queuing layer with a lockless list.

     Resulting in a 300% (4x) improvement on heavy TX workloads, sending
     twice the number of packets per second, for half the cpu cycles.

   - Allow constantly busy flows to migrate to a more suitable CPU/NIC
     queue.

     Normally we perform queue re-selection when flow comes out of idle,
     but under extreme circumstances the flows may be constantly busy.

     Add sysctl to allow periodic rehashing even if it'd risk packet
     reordering.

   - Optimize the NAPI skb cache, make it larger, use it in more paths.

   - Attempt returning Tx skbs to the originating CPU (like we already
     did for Rx skbs).

   - Various data structure layout and prefetch optimizations from Eric.

   - Remove ktime_get() from the recvmsg() fast path, ktime_get() is
     sadly quite expensive on recent AMD machines.

   - Extend threaded NAPI polling to allow the kthread busy poll for
     packets.

   - Make MPTCP use Rx backlog processing. This lowers the lock
     pressure, improving the Rx performance.

   - Support memcg accounting of MPTCP socket memory.

   - Allow admin to opt sockets out of global protocol memory accounting
     (using a sysctl or BPF-based policy). The global limits are a poor
     fit for modern container workloads, where limits are imposed using
     cgroups.

   - Improve heuristics for when to kick off AF_UNIX garbage collection.

   - Allow users to control TCP SACK compression, and default to 33% of
     RTT.

   - Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
     unnecessarily aggressive rcvbuf growth and overshot when the
     connection RTT is low.

   - Preserve skb metadata space across skb_push / skb_pull operations.

   - Support for IPIP encapsulation in the nftables flowtable offload.

   - Support appending IP interface information to ICMP messages (RFC
     5837).

   - Support setting max record size in TLS (RFC 8449).

   - Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.

   - Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.

   - Let users configure the number of write buffers in SMC.

   - Add new struct sockaddr_unsized for sockaddr of unknown length,
     from Kees.

   - Some conversions away from the crypto_ahash API, from Eric Biggers.

   - Some preparations for slimming down struct page.

   - YAML Netlink protocol spec for WireGuard.

   - Add a tool on top of YAML Netlink specs/lib for reporting commonly
     computed derived statistics and summarized system state.

  Driver API:

   - Add CAN XL support to the CAN Netlink interface.

   - Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
     defined by the OPEN Alliance's "Advanced diagnostic features for
     100BASE-T1 automotive Ethernet PHYs" specification.

   - Add DPLL phase-adjust-gran pin attribute (and implement it in
     zl3073x).

   - Refactor xfrm_input lock to reduce contention when NIC offloads
     IPsec and performs RSS.

   - Add info to devlink params whether the current setting is the
     default or a user override. Allow resetting back to default.

   - Add standard device stats for PSP crypto offload.

   - Leverage DSA frame broadcast to implement simple HSR frame
     duplication for a lot of switches without dedicated HSR offload.

   - Add uAPI defines for 1.6Tbps link modes.

  Device drivers:

   - Add Motorcomm YT921x gigabit Ethernet switch support.

   - Add MUCSE driver for N500/N210 1GbE NIC series.

   - Convert drivers to support dedicated ops for timestamping control,
     and away from the direct IOCTL handling. While at it support GET
     operations for PHY timestamping.

   - Add (and convert most drivers to) a dedicated ethtool callback for
     reading the Rx ring count.

   - Significant refactoring efforts in the STMMAC driver, which
     supports Synopsys turn-key MAC IP integrated into a ton of SoCs.

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support PPS in/out on all pins
      - Intel (100G, ice, idpf):
         - ice: implement standard ethtool and timestamping stats
         - i40e: support setting the max number of MAC addresses per VF
         - iavf: support RSS of GTP tunnels for 5G and LTE deployments
      - nVidia/Mellanox (mlx5):
         - reduce downtime on interface reconfiguration
         - disable being an XDP redirect target by default (same as
           other drivers) to avoid wasting resources if feature is
           unused
      - Meta (fbnic):
         - add support for Linux-managed PCS on 25G, 50G, and 100G links
      - Wangxun:
         - support Rx descriptor merge, and Tx head writeback
         - support Rx coalescing offload
         - support 25G SPF and 40G QSFP modules

   - Ethernet virtual:
      - Google (gve):
         - allow ethtool to configure rx_buf_len
         - implement XDP HW RX Timestamping support for DQ descriptor
           format
      - Microsoft vNIC (mana):
         - support HW link state events
         - handle hardware recovery events when probing the device

   - Ethernet NICs consumer, and embedded:
      - usbnet: add support for Byte Queue Limits (BQL)
      - AMD (amd-xgbe):
         - add device selftests
      - NXP (enetc):
         - add i.MX94 support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - bcmasp: add support for PHY-based Wake-on-LAN
      - Broadcom switches (b53):
         - support port isolation
         - support BCM5389/97/98 and BCM63XX ARL formats
      - Lantiq/MaxLinear switches:
         - support bridge FDB entries on the CPU port
         - use regmap for register access
         - allow user to enable/disable learning
         - support Energy Efficient Ethernet
         - support configuring RMII clock delays
         - add tagging driver for MaxLinear GSW1xx switches
      - Synopsys (stmmac):
         - support using the HW clock in free running mode
         - add Eswin EIC7700 support
         - add Rockchip RK3506 support
         - add Altera Agilex5 support
      - Cadence (macb):
         - cleanup and consolidate descriptor and DMA address handling
         - add EyeQ5 support
      - TI:
         - icssg-prueth: support AF_XDP
      - Airoha access points:
         - add missing Ethernet stats and link state callback
         - add AN7583 support
         - support out-of-order Tx completion processing
      - Power over Ethernet:
         - pd692x0: preserve PSE configuration across reboots
         - add support for TPS23881B devices

   - Ethernet PHYs:
      - Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
      - Support 50G SerDes and 100G interfaces in Linux-managed PHYs
      - micrel:
         - support for non PTP SKUs of lan8814
         - enable in-band auto-negotiation on lan8814
      - realtek:
         - cable testing support on RTL8224
         - interrupt support on RTL8221B
      - motorcomm: support for PHY LEDs on YT853
      - microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
      - mscc: support for PHY LED control

   - CAN drivers:
      - m_can: add support for optional reset and system wake up
      - remove can_change_mtu() obsoleted by core handling
      - mcp251xfd: support GPIO controller functionality

   - Bluetooth:
      - add initial support for PASTa

   - WiFi:
      - split ieee80211.h file, it's way too big
      - improvements in VHT radiotap reporting, S1G, Channel Switch
        Announcement handling, rate tracking in mesh networks
      - improve multi-radio monitor mode support, and add a cfg80211
        debugfs interface for it
      - HT action frame handling on 6 GHz
      - initial chanctx work towards NAN
      - MU-MIMO sniffer improvements

   - WiFi drivers:
      - RealTek (rtw89):
         - support USB devices RTL8852AU and RTL8852CU
         - initial work for RTL8922DE
         - improved injection support
      - Intel:
         - iwlwifi: new sniffer API support
      - MediaTek (mt76):
         - WED support for >32-bit DMA
         - airoha NPU support
         - regdomain improvements
         - continued WiFi7/MLO work
      - Qualcomm/Atheros:
         - ath10k: factory test support
         - ath11k: TX power insertion support
         - ath12k: BSS color change support
         - ath12k: statistics improvements
      - brcmfmac: Acer A1 840 tablet quirk
      - rtl8xxxu: 40 MHz connection fixes/support"

* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
  net: page_pool: sanitise allocation order
  net: page pool: xa init with destroy on pp init
  net/mlx5e: Support XDP target xmit with dummy program
  net/mlx5e: Update XDP features in switch channels
  selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
  net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
  wireguard: netlink: generate netlink code
  wireguard: uapi: generate header with ynl-gen
  wireguard: uapi: move flag enums
  wireguard: uapi: move enum wg_cmd
  wireguard: netlink: add YNL specification
  selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
  selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
  selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
  selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
  selftests: drv-net: introduce Iperf3Runner for measurement use cases
  selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
  net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
  Documentation: net: dsa: mention simple HSR offload helpers
  Documentation: net: dsa: mention availability of RedBox
  ...

1 files changed, 95 insertions, 5 deletions

diff --git a/tools/net/ynl/pyynl/cli.py b/tools/net/ynl/pyynl/cli.py
index 8c192e900bd3..af02a5b7e5a2 100755
--- a/tools/net/ynl/pyynl/cli.py
+++ b/tools/net/ynl/pyynl/cli.py
@@ -7,9 +7,10 @@ import os
 import pathlib
 import pprint
 import sys
+import textwrap
 
 sys.path.append(pathlib.Path(__file__).resolve().parent.as_posix())
-from lib import YnlFamily, Netlink, NlError
+from lib import YnlFamily, Netlink, NlError, SpecFamily
 
 sys_schema_dir='/usr/share/ynl'
 relative_schema_dir='../../../../Documentation/netlink'
@@ -39,6 +40,60 @@ class YnlEncoder(json.JSONEncoder):
         return json.JSONEncoder.default(self, obj)
 
 
+def print_attr_list(ynl, attr_names, attr_set, indent=2):
+    """Print a list of attributes with their types and documentation."""
+    prefix = ' ' * indent
+    for attr_name in attr_names:
+        if attr_name in attr_set.attrs:
+            attr = attr_set.attrs[attr_name]
+            attr_info = f'{prefix}- {attr_name}: {attr.type}'
+            if 'enum' in attr.yaml:
+                enum_name = attr.yaml['enum']
+                attr_info += f" (enum: {enum_name})"
+                # Print enum values if available
+                if enum_name in ynl.consts:
+                    const = ynl.consts[enum_name]
+                    enum_values = list(const.entries.keys())
+                    attr_info += f"\n{prefix}  {const.type.capitalize()}: {', '.join(enum_values)}"
+
+            # Show nested attributes reference and recursively display them
+            nested_set_name = None
+            if attr.type == 'nest' and 'nested-attributes' in attr.yaml:
+                nested_set_name = attr.yaml['nested-attributes']
+                attr_info += f" -> {nested_set_name}"
+
+            if attr.yaml.get('doc'):
+                doc_text = textwrap.indent(attr.yaml['doc'], prefix + '  ')
+                attr_info += f"\n{doc_text}"
+            print(attr_info)
+
+            # Recursively show nested attributes
+            if nested_set_name in ynl.attr_sets:
+                nested_set = ynl.attr_sets[nested_set_name]
+                # Filter out 'unspec' and other unused attrs
+                nested_names = [n for n in nested_set.attrs.keys()
+                                if nested_set.attrs[n].type != 'unused']
+                if nested_names:
+                    print_attr_list(ynl, nested_names, nested_set, indent + 4)
+
+
+def print_mode_attrs(ynl, mode, mode_spec, attr_set, print_request=True):
+    """Print a given mode (do/dump/event/notify)."""
+    mode_title = mode.capitalize()
+
+    if print_request and 'request' in mode_spec and 'attributes' in mode_spec['request']:
+        print(f'\n{mode_title} request attributes:')
+        print_attr_list(ynl, mode_spec['request']['attributes'], attr_set)
+
+    if 'reply' in mode_spec and 'attributes' in mode_spec['reply']:
+        print(f'\n{mode_title} reply attributes:')
+        print_attr_list(ynl, mode_spec['reply']['attributes'], attr_set)
+
+    if 'attributes' in mode_spec:
+        print(f'\n{mode_title} attributes:')
+        print_attr_list(ynl, mode_spec['attributes'], attr_set)
+
+
 def main():
     description = """
     YNL CLI utility - a general purpose netlink utility that uses YAML
@@ -70,6 +125,9 @@ def main():
     group.add_argument('--dump', dest='dump', metavar='DUMP-OPERATION', type=str)
     group.add_argument('--list-ops', action='store_true')
     group.add_argument('--list-msgs', action='store_true')
+    group.add_argument('--list-attrs', dest='list_attrs', metavar='OPERATION', type=str,
+                       help='List attributes for an operation')
+    group.add_argument('--validate', action='store_true')
 
     parser.add_argument('--duration', dest='duration', type=int,
                         help='when subscribed, watch for DURATION seconds')
@@ -111,15 +169,25 @@ def main():
 
     if args.family:
         spec = f"{spec_dir()}/{args.family}.yaml"
-        if args.schema is None and spec.startswith(sys_schema_dir):
-            args.schema = '' # disable schema validation when installed
-        if args.process_unknown is None:
-            args.process_unknown = True
     else:
         spec = args.spec
     if not os.path.isfile(spec):
         raise Exception(f"Spec file {spec} does not exist")
 
+    if args.validate:
+        try:
+            SpecFamily(spec, args.schema)
+        except Exception as error:
+            print(error)
+            exit(1)
+        return
+
+    if args.family: # set behaviour when using installed specs
+        if args.schema is None and spec.startswith(sys_schema_dir):
+            args.schema = '' # disable schema validation when installed
+        if args.process_unknown is None:
+            args.process_unknown = True
+
     ynl = YnlFamily(spec, args.schema, args.process_unknown,
                     recv_size=args.dbg_small_recv)
     if args.dbg_small_recv:
@@ -135,6 +203,28 @@ def main():
         for op_name, op in ynl.msgs.items():
             print(op_name, " [", ", ".join(op.modes), "]")
 
+    if args.list_attrs:
+        op = ynl.msgs.get(args.list_attrs)
+        if not op:
+            print(f'Operation {args.list_attrs} not found')
+            exit(1)
+
+        print(f'Operation: {op.name}')
+        print(op.yaml['doc'])
+
+        for mode in ['do', 'dump', 'event']:
+            if mode in op.yaml:
+                print_mode_attrs(ynl, mode, op.yaml[mode], op.attr_set, True)
+
+        if 'notify' in op.yaml:
+            mode_spec = op.yaml['notify']
+            ref_spec = ynl.msgs.get(mode_spec).yaml.get('do')
+            if ref_spec:
+                print_mode_attrs(ynl, 'notify', ref_spec, op.attr_set, False)
+
+        if 'mcgrp' in op.yaml:
+            print(f"\nMulticast group: {op.yaml['mcgrp']}")
+
     try:
         if args.do:
             reply = ynl.do(args.do, attrs, args.flags)