Merge tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextipvs-next/mainipvs-next/HEAD

Pull networking updates from Paolo Abeni:
 "Core & protocols:

   - A significant effort all around the stack to guide the compiler to
     make the right choice when inlining code, to avoid unneeded calls
     for small helper and stack canary overhead in the fast-path.

     This generates better and faster code with very small or no text
     size increases, as in many cases the call generated more code than
     the actual inlined helper.

   - Extend AccECN implementation so that is now functionally complete,
     also allow the user-space enabling it on a per network namespace
     basis.

   - Add support for memory providers with large (above 4K) rx buffer.
     Paired with hw-gro, larger rx buffer sizes reduce the number of
     buffers traversing the stack, dincreasing single stream CPU usage
     by up to ~30%.

   - Do not add HBH header to Big TCP GSO packets. This simplifies the
     RX path, the TX path and the NIC drivers, and is possible because
     user-space taps can now interpret correctly such packets without
     the HBH hint.

   - Allow IPv6 routes to be configured with a gateway address that is
     resolved out of a different interface than the one specified,
     aligning IPv6 to IPv4 behavior.

   - Multi-queue aware sch_cake. This makes it possible to scale the
     rate shaper of sch_cake across multiple CPUs, while still enforcing
     a single global rate on the interface.

   - Add support for the nbcon (new buffer console) infrastructure to
     netconsole, enabling lock-free, priority-based console operations
     that are safer in crash scenarios.

   - Improve the TCP ipv6 output path to cache the flow information,
     saving cpu cycles, reducing cache line misses and stack use.

   - Improve netfilter packet tracker to resolve clashes for most
     protocols, avoiding unneeded drops on rare occasions.

   - Add IP6IP6 tunneling acceleration to the flowtable infrastructure.

   - Reduce tcp socket size by one cache line.

   - Notify neighbour changes atomically, avoiding inconsistencies
     between the notification sequence and the actual states sequence.

   - Add vsock namespace support, allowing complete isolation of vsocks
     across different network namespaces.

   - Improve xsk generic performances with cache-alignment-oriented
     optimizations.

   - Support netconsole automatic target recovery, allowing netconsole
     to reestablish targets when underlying low-level interface comes
     back online.

  Driver API:

   - Support for switching the working mode (automatic vs manual) of a
     DPLL device via netlink.

   - Introduce PHY ports representation to expose multiple front-facing
     media ports over a single MAC.

   - Introduce "rx-polarity" and "tx-polarity" device tree properties,
     to generalize polarity inversion requirements for differential
     signaling.

   - Add helper to create, prepare and enable managed clocks.

  Device drivers:

   - Add Huawei hinic3 PF etherner driver.

   - Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
     controller.

   - Add ethernet driver for MaxLinear MxL862xx switches

   - Remove parallel-port Ethernet driver.

   - Convert existing driver timestamp configuration reporting to
     hwtstamp_get and remove legacy ioctl().

   - Convert existing drivers to .get_rx_ring_count(), simplifing the RX
     ring count retrieval. Also remove the legacy fallback path.

   - Ethernet high-speed NICs:
      - Broadcom (bnxt, bng):
         - bnxt: add FW interface update to support FEC stats histogram
           and NVRAM defragmentation
         - bng: add TSO and H/W GRO support
      - nVidia/Mellanox (mlx5):
         - improve latency of channel restart operations, reducing the
           used H/W resources
         - add TSO support for UDP over GRE over VLAN
         - add flow counters support for hardware steering (HWS) rules
         - use a static memory area to store headers for H/W GRO,
           leading to 12% RX tput improvement
      - Intel (100G, ice, idpf):
         - ice: reorganizes layout of Tx and Rx rings for cacheline
           locality and utilizes __cacheline_group* macros on the new
           layouts
         - ice: introduces Synchronous Ethernet (SyncE) support
      - Meta (fbnic):
         - adds debugfs for firmware mailbox and tx/rx rings vectors

   - Ethernet virtual:
      - geneve: introduce GRO/GSO support for double UDP encapsulation

   - Ethernet NICs consumer, and embedded:
      - Synopsys (stmmac):
         - some code refactoring and cleanups
      - RealTek (r8169):
         - add support for RTL8127ATF (10G Fiber SFP)
         - add dash and LTR support
      - Airoha:
         - AN8811HB 2.5 Gbps phy support
      - Freescale (fec):
         - add XDP zero-copy support
      - Thunderbolt:
         - add get link setting support to allow bonding
      - Renesas:
         - add support for RZ/G3L GBETH SoC

   - Ethernet switches:
      - Maxlinear:
         - support R(G)MII slow rate configuration
         - add support for Intel GSW150
      - Motorcomm (yt921x):
         - add DCB/QoS support
      - TI:
         - icssm-prueth: support bridging (STP/RSTP) via the switchdev
           framework

   - Ethernet PHYs:
      - Realtek:
         - enable SGMII and 2500Base-X in-band auto-negotiation
         - simplify and reunify C22/C45 drivers
      - Micrel: convert bindings to DT schema

   - CAN:
      - move skb headroom content into skb extensions, making CAN
        metadata access more robust

   - CAN drivers:
      - rcar_canfd:
         - add support for FD-only mode
         - add support for the RZ/T2H SoC
      - sja1000: cleanup the CAN state handling

   - WiFi:
      - implement EPPKE/802.1X over auth frames support
      - split up drop reasons better, removing generic RX_DROP
      - additional FTM capabilities: 6 GHz support, supported number of
        spatial streams and supported number of LTF repetitions
      - better mac80211 iterators to enumerate resources
      - initial UHR (Wi-Fi 8) support for cfg80211/mac80211

   - WiFi drivers:
      - Qualcomm/Atheros:
         - ath11k: support for Channel Frequency Response measurement
         - ath12k: a significant driver refactor to support multi-wiphy
           devices and and pave the way for future device support in the
           same driver (rather than splitting to ath13k)
         - ath12k: support for the QCC2072 chipset
      - Intel:
         - iwlwifi: partial Neighbor Awareness Networking (NAN) support
         - iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
      - RealTek (rtw89):
         - preparations for RTL8922DE support

   - Bluetooth:
      - implement setsockopt(BT_PHY) to set the connection packet type/PHY
      - set link_policy on incoming ACL connections

   - Bluetooth drivers:
      - btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
      - btqca: add WCN6855 firmware priority selection feature"

* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
  bnge/bng_re: Add a new HSI
  net: macb: Fix tx/rx malfunction after phy link down and up
  af_unix: Fix memleak of newsk in unix_stream_connect().
  net: ti: icssg-prueth: Add optional dependency on HSR
  net: dsa: add basic initial driver for MxL862xx switches
  net: mdio: add unlocked mdiodev C45 bus accessors
  net: dsa: add tag format for MxL862xx switches
  dt-bindings: net: dsa: add MaxLinear MxL862xx
  selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
  octeontx2-pf: Unregister devlink on probe failure
  net: renesas: rswitch: fix forwarding offload statemachine
  ionic: Rate limit unknown xcvr type messages
  tcp: inet6_csk_xmit() optimization
  tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
  tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
  ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
  ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
  ipv6: use np->final in inet6_sk_rebuild_header()
  ipv6: add daddr/final storage in struct ipv6_pinfo
  net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
  ...

9 files changed, 879 insertions, 0 deletions

diff --git a/tools/testing/selftests/drivers/net/netconsole/Makefile b/tools/testing/selftests/drivers/net/netconsole/Makefile
new file mode 100644
index 000000000000..b56c70b7e274
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netconsole/Makefile
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+
+TEST_INCLUDES := \
+	../../../net/lib.sh \
+	../lib/sh/lib_netcons.sh \
+# end of TEST_INCLUDES
+
+TEST_PROGS := \
+	netcons_basic.sh \
+	netcons_cmdline.sh \
+	netcons_fragmented_msg.sh \
+	netcons_overflow.sh \
+	netcons_resume.sh \
+	netcons_sysdata.sh \
+	netcons_torture.sh \
+# end of TEST_PROGS
+
+include ../../../lib.mk
+
diff --git a/tools/testing/selftests/drivers/net/netconsole/config b/tools/testing/selftests/drivers/net/netconsole/config
new file mode 100644
index 000000000000..a3f6b0fd44ef
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netconsole/config
@@ -0,0 +1,6 @@
+CONFIG_CONFIGFS_FS=y
+CONFIG_IPV6=y
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETCONSOLE_EXTENDED_LOG=y
+CONFIG_NETDEVSIM=m
diff --git a/tools/testing/selftests/drivers/net/netconsole/netcons_basic.sh b/tools/testing/selftests/drivers/net/netconsole/netcons_basic.sh
new file mode 100755
index 000000000000..59cf10013ecd
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netconsole/netcons_basic.sh
@@ -0,0 +1,74 @@
+#!/usr/bin/env bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test creates two netdevsim virtual interfaces, assigns one of them (the
+# "destination interface") to a new namespace, and assigns IP addresses to both
+# interfaces.
+#
+# It listens on the destination interface using socat and configures a dynamic
+# target on netconsole, pointing to the destination IP address.
+#
+# Finally, it checks whether the message was received properly on the
+# destination interface.  Note that this test may pollute the kernel log buffer
+# (dmesg) and relies on dynamic configuration and namespaces being configured.
+#
+# Author: Breno Leitao <leitao@debian.org>
+
+set -euo pipefail
+
+SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")")
+
+source "${SCRIPTDIR}"/../lib/sh/lib_netcons.sh
+
+modprobe netdevsim 2> /dev/null || true
+modprobe netconsole 2> /dev/null || true
+
+# The content of kmsg will be save to the following file
+OUTPUT_FILE="/tmp/${TARGET}"
+
+# Check for basic system dependency and exit if not found
+check_for_dependencies
+# Remove the namespace, interfaces and netconsole target on exit
+trap cleanup EXIT
+
+# Run the test twice, with different format modes
+for FORMAT in "basic" "extended"
+do
+	for IP_VERSION in "ipv6" "ipv4"
+	do
+		echo "Running with target mode: ${FORMAT} (${IP_VERSION})"
+		# Set current loglevel to KERN_INFO(6), and default to
+		# KERN_NOTICE(5)
+		echo "6 5" > /proc/sys/kernel/printk
+		# Create one namespace and two interfaces
+		set_network "${IP_VERSION}"
+		# Create a dynamic target for netconsole
+		create_dynamic_target "${FORMAT}"
+		# Only set userdata for extended format
+		if [ "$FORMAT" == "extended" ]
+		then
+			# Set userdata "key" with the "value" value
+			set_user_data
+		fi
+		# Listed for netconsole port inside the namespace and
+		# destination interface
+		listen_port_and_save_to "${OUTPUT_FILE}" "${IP_VERSION}" &
+		# Wait for socat to start and listen to the port.
+		wait_for_port "${NAMESPACE}" "${PORT}" "${IP_VERSION}"
+		# Send the message
+		echo "${MSG}: ${TARGET}" > /dev/kmsg
+		# Wait until socat saves the file to disk
+		busywait "${BUSYWAIT_TIMEOUT}" test -s "${OUTPUT_FILE}"
+
+		# Make sure the message was received in the dst part
+		# and exit
+		validate_result "${OUTPUT_FILE}" "${FORMAT}"
+		# kill socat in case it is still running
+		pkill_socat
+		cleanup
+		echo "${FORMAT} : ${IP_VERSION} : Test passed" >&2
+	done
+done
+
+trap - EXIT
+exit "${ksft_pass}"
diff --git a/tools/testing/selftests/drivers/net/netconsole/netcons_cmdline.sh b/tools/testing/selftests/drivers/net/netconsole/netcons_cmdline.sh
new file mode 100755
index 000000000000..96d704b8d9d9
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netconsole/netcons_cmdline.sh
@@ -0,0 +1,65 @@
+#!/usr/bin/env bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This is a selftest to test cmdline arguments on netconsole.
+# It exercises loading of netconsole from cmdline instead of the dynamic
+# reconfiguration. This includes parsing the long netconsole= line and all the
+# flow through init_netconsole().
+#
+# Author: Breno Leitao <leitao@debian.org>
+
+set -euo pipefail
+
+SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")")
+
+source "${SCRIPTDIR}"/../lib/sh/lib_netcons.sh
+
+check_netconsole_module
+
+modprobe netdevsim 2> /dev/null || true
+rmmod netconsole 2> /dev/null || true
+
+# Check for basic system dependency and exit if not found
+# check_for_dependencies
+# Set current loglevel to KERN_INFO(6), and default to KERN_NOTICE(5)
+echo "6 5" > /proc/sys/kernel/printk
+# Remove the namespace and network interfaces
+trap do_cleanup EXIT
+# Create one namespace and two interfaces
+set_network
+
+# Run the test twice, with different cmdline parameters
+for BINDMODE in "ifname" "mac"
+do
+	echo "Running with bind mode: ${BINDMODE}" >&2
+	# Create the command line for netconsole, with the configuration from
+	# the function above
+	CMDLINE=$(create_cmdline_str "${BINDMODE}")
+
+	# The content of kmsg will be save to the following file
+	OUTPUT_FILE="/tmp/${TARGET}-${BINDMODE}"
+
+	# Load the module, with the cmdline set
+	modprobe netconsole "${CMDLINE}"
+
+	# Listed for netconsole port inside the namespace and destination
+	# interface
+	listen_port_and_save_to "${OUTPUT_FILE}" &
+	# Wait for socat to start and listen to the port.
+	wait_local_port_listen "${NAMESPACE}" "${PORT}" udp
+	# Send the message
+	echo "${MSG}: ${TARGET}" > /dev/kmsg
+	# Wait until socat saves the file to disk
+	busywait "${BUSYWAIT_TIMEOUT}" test -s "${OUTPUT_FILE}"
+	# Make sure the message was received in the dst part
+	# and exit
+	validate_msg "${OUTPUT_FILE}"
+
+	# kill socat in case it is still running
+	pkill_socat
+	# Unload the module
+	rmmod netconsole
+	echo "${BINDMODE} : Test passed" >&2
+done
+
+exit "${ksft_pass}"
diff --git a/tools/testing/selftests/drivers/net/netconsole/netcons_fragmented_msg.sh b/tools/testing/selftests/drivers/net/netconsole/netcons_fragmented_msg.sh
new file mode 100755
index 000000000000..0dc7280c3080
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netconsole/netcons_fragmented_msg.sh
@@ -0,0 +1,122 @@
+#!/usr/bin/env bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test netconsole's message fragmentation functionality.
+#
+# When a message exceeds the maximum packet size, netconsole splits it into
+# multiple fragments for transmission. This test verifies:
+#  - Correct fragmentation of large messages
+#  - Proper reassembly of fragments at the receiver
+#  - Preservation of userdata across fragments
+#  - Behavior with and without kernel release version appending
+#
+# Author: Breno Leitao <leitao@debian.org>
+
+set -euo pipefail
+
+SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")")
+
+source "${SCRIPTDIR}"/../lib/sh/lib_netcons.sh
+
+modprobe netdevsim 2> /dev/null || true
+modprobe netconsole 2> /dev/null || true
+
+# The content of kmsg will be save to the following file
+OUTPUT_FILE="/tmp/${TARGET}"
+
+# set userdata to a long value. In this case, it is "1-2-3-4...50-"
+USERDATA_VALUE=$(printf -- '%.2s-' {1..60})
+
+# Convert the header string in a regexp, so, we can remove
+# the second header as well.
+# A header looks like "13,468,514729715,-,ncfrag=0/1135;". If
+# release is appended, you might find something like:L
+# "6.13.0-04048-g4f561a87745a,13,468,514729715,-,ncfrag=0/1135;"
+function header_to_regex() {
+	# header is everything before ;
+	local HEADER="${1}"
+	REGEX=$(echo "${HEADER}" | cut -d'=' -f1)
+	echo "${REGEX}=[0-9]*\/[0-9]*;"
+}
+
+# We have two headers in the message. Remove both to get the full message,
+# and extract the full message.
+function extract_msg() {
+	local MSGFILE="${1}"
+	# Extract the header, which is the very first thing that arrives in the
+	# first list.
+	HEADER=$(sed -n '1p' "${MSGFILE}" | cut -d';' -f1)
+	HEADER_REGEX=$(header_to_regex "${HEADER}")
+
+	# Remove the two headers from the received message
+	# This will return the message without any header, similarly to what
+	# was sent.
+	sed "s/""${HEADER_REGEX}""//g" "${MSGFILE}"
+}
+
+# Validate the message, which has two messages glued together.
+# unwrap them to make sure all the characters were transmitted.
+# File will look like the following:
+#  13,468,514729715,-,ncfrag=0/1135;<message>
+#   key=<part of key>-13,468,514729715,-,ncfrag=967/1135;<rest of the key>
+function validate_fragmented_result() {
+	# Discard the netconsole headers, and assemble the full message
+	RCVMSG=$(extract_msg "${1}")
+
+	# check for the main message
+	if ! echo "${RCVMSG}" | grep -q "${MSG}"; then
+		echo "Message body doesn't match." >&2
+		echo "msg received=" "${RCVMSG}" >&2
+		exit "${ksft_fail}"
+	fi
+
+	# check userdata
+	if ! echo "${RCVMSG}" | grep -q "${USERDATA_VALUE}"; then
+		echo "message userdata doesn't match" >&2
+		echo "msg received=" "${RCVMSG}" >&2
+		exit "${ksft_fail}"
+	fi
+	# test passed. hooray
+}
+
+# Check for basic system dependency and exit if not found
+check_for_dependencies
+# Set current loglevel to KERN_INFO(6), and default to KERN_NOTICE(5)
+echo "6 5" > /proc/sys/kernel/printk
+# Remove the namespace, interfaces and netconsole target on exit
+trap cleanup EXIT
+# Create one namespace and two interfaces
+set_network
+# Create a dynamic target for netconsole
+create_dynamic_target
+# Set userdata "key" with the "value" value
+set_user_data
+
+
+# TEST 1: Send message and userdata. They will fragment
+# =======
+MSG=$(printf -- 'MSG%.3s=' {1..150})
+
+# Listen for netconsole port inside the namespace and destination interface
+listen_port_and_save_to "${OUTPUT_FILE}" &
+# Wait for socat to start and listen to the port.
+wait_local_port_listen "${NAMESPACE}" "${PORT}" udp
+# Send the message
+echo "${MSG}: ${TARGET}" > /dev/kmsg
+# Wait until socat saves the file to disk
+busywait "${BUSYWAIT_TIMEOUT}" test -s "${OUTPUT_FILE}"
+# Check if the message was not corrupted
+validate_fragmented_result "${OUTPUT_FILE}"
+
+# TEST 2: Test with smaller message, and without release appended
+# =======
+MSG=$(printf -- 'FOOBAR%.3s=' {1..100})
+# Let's disable release and test again.
+disable_release_append
+
+listen_port_and_save_to "${OUTPUT_FILE}" &
+wait_local_port_listen "${NAMESPACE}" "${PORT}" udp
+echo "${MSG}: ${TARGET}" > /dev/kmsg
+busywait "${BUSYWAIT_TIMEOUT}" test -s "${OUTPUT_FILE}"
+validate_fragmented_result "${OUTPUT_FILE}"
+exit "${ksft_pass}"
diff --git a/tools/testing/selftests/drivers/net/netconsole/netcons_overflow.sh b/tools/testing/selftests/drivers/net/netconsole/netcons_overflow.sh
new file mode 100755
index 000000000000..a8e43d08c166
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netconsole/netcons_overflow.sh
@@ -0,0 +1,67 @@
+#!/usr/bin/env bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test verifies that users can successfully create up to
+# MAX_USERDATA_ITEMS userdata entries without encountering any failures.
+#
+# Additionally, it tests for expected failure when attempting to exceed this
+# maximum limit.
+#
+# Author: Breno Leitao <leitao@debian.org>
+
+set -euo pipefail
+
+SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")")
+
+source "${SCRIPTDIR}"/../lib/sh/lib_netcons.sh
+# This is coming from netconsole code. Check for it in drivers/net/netconsole.c
+MAX_USERDATA_ITEMS=256
+
+# Function to create userdata entries
+function create_userdata_max_entries() {
+	# All these keys should be created without any error
+	for i in $(seq $MAX_USERDATA_ITEMS)
+	do
+		# USERDATA_KEY is used by set_user_data
+		USERDATA_KEY="key"${i}
+		set_user_data
+	done
+}
+
+# Function to verify the entry limit
+function verify_entry_limit() {
+	# Allowing the test to fail without exiting, since the next command
+	# will fail
+	set +e
+	mkdir "${NETCONS_PATH}/userdata/key_that_will_fail" 2> /dev/null
+	ret="$?"
+	set -e
+	if [ "$ret" -eq 0 ];
+	then
+		echo "Adding more than ${MAX_USERDATA_ITEMS} entries in userdata should fail, but it didn't" >&2
+		ls "${NETCONS_PATH}/userdata/" >&2
+		exit "${ksft_fail}"
+	fi
+}
+
+# ========== #
+# Start here #
+# ========== #
+
+modprobe netdevsim 2> /dev/null || true
+modprobe netconsole 2> /dev/null || true
+
+# Check for basic system dependency and exit if not found
+check_for_dependencies
+
+# Remove the namespace, interfaces and netconsole target on exit
+trap cleanup EXIT
+# Create one namespace and two interfaces
+set_network
+# Create a dynamic target for netconsole
+create_dynamic_target
+# populate the maximum number of supported keys in userdata
+create_userdata_max_entries
+# Verify an additional entry is not allowed
+verify_entry_limit
+exit "${ksft_pass}"
diff --git a/tools/testing/selftests/drivers/net/netconsole/netcons_resume.sh b/tools/testing/selftests/drivers/net/netconsole/netcons_resume.sh
new file mode 100755
index 000000000000..cb59cf436dd0
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netconsole/netcons_resume.sh
@@ -0,0 +1,124 @@
+#!/usr/bin/env bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test validates that netconsole is able to resume a target that was
+# deactivated when its interface was removed when the interface is brought
+# back up.
+#
+# The test configures a netconsole target and then removes netdevsim module to
+# cause the interface to disappear. Targets are configured via cmdline to ensure
+# targets bound by interface name and mac address can be resumed.
+# The test verifies that the target moved to disabled state before adding
+# netdevsim and the interface back.
+#
+# Finally, the test verifies that the target is re-enabled automatically and
+# the message is received on the destination interface.
+#
+# Author: Andre Carvalho <asantostc@gmail.com>
+
+set -euo pipefail
+
+SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")")
+
+source "${SCRIPTDIR}"/../lib/sh/lib_netcons.sh
+
+SAVED_SRCMAC="" # to be populated later
+SAVED_DSTMAC="" # to be populated later
+
+modprobe netdevsim 2> /dev/null || true
+rmmod netconsole 2> /dev/null || true
+
+check_netconsole_module
+
+function cleanup() {
+	cleanup_netcons "${NETCONS_CONFIGFS}/cmdline0"
+	do_cleanup
+	rmmod netconsole
+}
+
+function trigger_reactivation() {
+	# Add back low level module
+	modprobe netdevsim
+	# Recreate namespace and two interfaces
+	set_network
+	# Restore MACs
+	ip netns exec "${NAMESPACE}" ip link set "${DSTIF}" \
+		address "${SAVED_DSTMAC}"
+	if [ "${BINDMODE}" == "mac" ]; then
+		ip link set dev "${SRCIF}" down
+		ip link set dev "${SRCIF}" address "${SAVED_SRCMAC}"
+		# Rename device in order to trigger target resume, as initial
+		# when device was recreated it didn't have correct mac address.
+		ip link set dev "${SRCIF}" name "${TARGET}"
+	fi
+}
+
+function trigger_deactivation() {
+	# Start by storing mac addresses so we can be restored in reactivate
+	SAVED_DSTMAC=$(ip netns exec "${NAMESPACE}" \
+		cat /sys/class/net/"$DSTIF"/address)
+	SAVED_SRCMAC=$(mac_get "${SRCIF}")
+	# Remove low level module
+	rmmod netdevsim
+}
+
+trap cleanup EXIT
+
+# Run the test twice, with different cmdline parameters
+for BINDMODE in "ifname" "mac"
+do
+	echo "Running with bind mode: ${BINDMODE}" >&2
+	# Set current loglevel to KERN_INFO(6), and default to KERN_NOTICE(5)
+	echo "6 5" > /proc/sys/kernel/printk
+
+	# Create one namespace and two interfaces
+	set_network
+
+	# Create the command line for netconsole, with the configuration from
+	# the function above
+	CMDLINE=$(create_cmdline_str "${BINDMODE}")
+
+	# The content of kmsg will be save to the following file
+	OUTPUT_FILE="/tmp/${TARGET}-${BINDMODE}"
+
+	# Load the module, with the cmdline set
+	modprobe netconsole "${CMDLINE}"
+	# Expose cmdline target in configfs
+	mkdir "${NETCONS_CONFIGFS}/cmdline0"
+
+	# Target should be enabled
+	wait_target_state "cmdline0" "enabled"
+
+	# Trigger deactivation by unloading netdevsim module. Target should be
+	# disabled.
+	trigger_deactivation
+	wait_target_state "cmdline0" "disabled"
+
+	# Trigger reactivation by loading netdevsim, recreating the network and
+	# restoring mac addresses. Target should be re-enabled.
+	trigger_reactivation
+	wait_target_state "cmdline0" "enabled"
+
+	# Listen for netconsole port inside the namespace and destination
+	# interface
+	listen_port_and_save_to "${OUTPUT_FILE}" &
+	# Wait for socat to start and listen to the port.
+	wait_local_port_listen "${NAMESPACE}" "${PORT}" udp
+	# Send the message
+	echo "${MSG}: ${TARGET}" > /dev/kmsg
+	# Wait until socat saves the file to disk
+	busywait "${BUSYWAIT_TIMEOUT}" test -s "${OUTPUT_FILE}"
+	# Make sure the message was received in the dst part
+	# and exit
+	validate_msg "${OUTPUT_FILE}"
+
+	# kill socat in case it is still running
+	pkill_socat
+	# Cleanup & unload the module
+	cleanup
+
+	echo "${BINDMODE} : Test passed" >&2
+done
+
+trap - EXIT
+exit "${EXIT_STATUS}"
diff --git a/tools/testing/selftests/drivers/net/netconsole/netcons_sysdata.sh b/tools/testing/selftests/drivers/net/netconsole/netcons_sysdata.sh
new file mode 100755
index 000000000000..3fb8c4afe3d2
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netconsole/netcons_sysdata.sh
@@ -0,0 +1,272 @@
+#!/usr/bin/env bash
+# SPDX-License-Identifier: GPL-2.0
+
+# A test that makes sure that sysdata runtime CPU data is properly set
+# when a message is sent.
+#
+# There are 3 different tests, every time sent using a random CPU.
+#  - Test #1
+#    * Only enable cpu_nr sysdata feature.
+#  - Test #2
+#    * Keep cpu_nr sysdata feature enable and enable userdata.
+#  - Test #3
+#    * keep userdata enabled, and disable sysdata cpu_nr feature.
+#
+# Author: Breno Leitao <leitao@debian.org>
+
+set -euo pipefail
+
+SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")")
+
+source "${SCRIPTDIR}"/../lib/sh/lib_netcons.sh
+
+# Enable the sysdata cpu_nr feature
+function set_cpu_nr() {
+	if [[ ! -f "${NETCONS_PATH}/userdata/cpu_nr_enabled" ]]
+	then
+		echo "Populate CPU configfs path not available in ${NETCONS_PATH}/userdata/cpu_nr_enabled" >&2
+		exit "${ksft_skip}"
+	fi
+
+	echo 1 > "${NETCONS_PATH}/userdata/cpu_nr_enabled"
+}
+
+# Enable the taskname to be appended to sysdata
+function set_taskname() {
+	if [[ ! -f "${NETCONS_PATH}/userdata/taskname_enabled" ]]
+	then
+		echo "Not able to enable taskname sysdata append. Configfs not available in ${NETCONS_PATH}/userdata/taskname_enabled" >&2
+		exit "${ksft_skip}"
+	fi
+
+	echo 1 > "${NETCONS_PATH}/userdata/taskname_enabled"
+}
+
+# Enable the release to be appended to sysdata
+function set_release() {
+	if [[ ! -f "${NETCONS_PATH}/userdata/release_enabled" ]]
+	then
+		echo "Not able to enable release sysdata append. Configfs not available in ${NETCONS_PATH}/userdata/release_enabled" >&2
+		exit "${ksft_skip}"
+	fi
+
+	echo 1 > "${NETCONS_PATH}/userdata/release_enabled"
+}
+
+# Enable the msgid to be appended to sysdata
+function set_msgid() {
+	if [[ ! -f "${NETCONS_PATH}/userdata/msgid_enabled" ]]
+	then
+		echo "Not able to enable msgid sysdata append. Configfs not available in ${NETCONS_PATH}/userdata/msgid_enabled" >&2
+		exit "${ksft_skip}"
+	fi
+
+	echo 1 > "${NETCONS_PATH}/userdata/msgid_enabled"
+}
+
+# Disable the sysdata cpu_nr feature
+function unset_cpu_nr() {
+	echo 0 > "${NETCONS_PATH}/userdata/cpu_nr_enabled"
+}
+
+# Once called, taskname=<..> will not be appended anymore
+function unset_taskname() {
+	echo 0 > "${NETCONS_PATH}/userdata/taskname_enabled"
+}
+
+function unset_release() {
+	echo 0 > "${NETCONS_PATH}/userdata/release_enabled"
+}
+
+function unset_msgid() {
+	echo 0 > "${NETCONS_PATH}/userdata/msgid_enabled"
+}
+
+# Test if MSG contains sysdata
+function validate_sysdata() {
+	# OUTPUT_FILE will contain something like:
+	# 6.11.1-0_fbk0_rc13_509_g30d75cea12f7,13,1822,115075213798,-;netconsole selftest: netcons_gtJHM
+	#  userdatakey=userdatavalue
+	#  cpu=X
+	#  taskname=<taskname>
+	#  msgid=<id>
+
+	# Echo is what this test uses to create the message. See runtest()
+	# function
+	SENDER="echo"
+
+	if [ ! -f "$OUTPUT_FILE" ]; then
+		echo "FAIL: File was not generated." >&2
+		exit "${ksft_fail}"
+	fi
+
+	if ! grep -q "${MSG}" "${OUTPUT_FILE}"; then
+		echo "FAIL: ${MSG} not found in ${OUTPUT_FILE}" >&2
+		cat "${OUTPUT_FILE}" >&2
+		exit "${ksft_fail}"
+	fi
+
+	# Check if cpu=XX exists in the file and matches the one used
+	# in taskset(1)
+	if ! grep -q "cpu=${CPU}\+" "${OUTPUT_FILE}"; then
+		echo "FAIL: 'cpu=${CPU}' not found in ${OUTPUT_FILE}" >&2
+		cat "${OUTPUT_FILE}" >&2
+		exit "${ksft_fail}"
+	fi
+
+	if ! grep -q "taskname=${SENDER}" "${OUTPUT_FILE}"; then
+		echo "FAIL: 'taskname=echo' not found in ${OUTPUT_FILE}" >&2
+		cat "${OUTPUT_FILE}" >&2
+		exit "${ksft_fail}"
+	fi
+
+	if ! grep -q "msgid=[0-9]\+$" "${OUTPUT_FILE}"; then
+		echo "FAIL: 'msgid=<id>' not found in ${OUTPUT_FILE}" >&2
+		cat "${OUTPUT_FILE}" >&2
+		exit "${ksft_fail}"
+	fi
+
+	rm "${OUTPUT_FILE}"
+	pkill_socat
+}
+
+function validate_release() {
+	RELEASE=$(uname -r)
+
+	if [ ! -f "$OUTPUT_FILE" ]; then
+		echo "FAIL: File was not generated." >&2
+		exit "${ksft_fail}"
+	fi
+
+	if ! grep -q "release=${RELEASE}" "${OUTPUT_FILE}"; then
+		echo "FAIL: 'release=${RELEASE}' not found in ${OUTPUT_FILE}" >&2
+		cat "${OUTPUT_FILE}" >&2
+		exit "${ksft_fail}"
+	fi
+}
+
+# Test if MSG content exists in OUTPUT_FILE but no `cpu=` and `taskname=`
+# strings
+function validate_no_sysdata() {
+	if [ ! -f "$OUTPUT_FILE" ]; then
+		echo "FAIL: File was not generated." >&2
+		exit "${ksft_fail}"
+	fi
+
+	if ! grep -q "${MSG}" "${OUTPUT_FILE}"; then
+		echo "FAIL: ${MSG} not found in ${OUTPUT_FILE}" >&2
+		cat "${OUTPUT_FILE}" >&2
+		exit "${ksft_fail}"
+	fi
+
+	if grep -q "cpu=" "${OUTPUT_FILE}"; then
+		echo "FAIL: 'cpu=  found in ${OUTPUT_FILE}" >&2
+		cat "${OUTPUT_FILE}" >&2
+		exit "${ksft_fail}"
+	fi
+
+	if grep -q "taskname=" "${OUTPUT_FILE}"; then
+		echo "FAIL: 'taskname=  found in ${OUTPUT_FILE}" >&2
+		cat "${OUTPUT_FILE}" >&2
+		exit "${ksft_fail}"
+	fi
+
+	if grep -q "release=" "${OUTPUT_FILE}"; then
+		echo "FAIL: 'release=  found in ${OUTPUT_FILE}" >&2
+		cat "${OUTPUT_FILE}" >&2
+		exit "${ksft_fail}"
+	fi
+
+	if grep -q "msgid=" "${OUTPUT_FILE}"; then
+		echo "FAIL: 'msgid=  found in ${OUTPUT_FILE}" >&2
+		cat "${OUTPUT_FILE}" >&2
+		exit "${ksft_fail}"
+	fi
+
+	rm "${OUTPUT_FILE}"
+}
+
+# Start socat, send the message and wait for the file to show up in the file
+# system
+function runtest {
+	# Listen for netconsole port inside the namespace and destination
+	# interface
+	listen_port_and_save_to "${OUTPUT_FILE}" &
+	# Wait for socat to start and listen to the port.
+	wait_local_port_listen "${NAMESPACE}" "${PORT}" udp
+	# Send the message
+	taskset -c "${CPU}" echo "${MSG}: ${TARGET}" > /dev/kmsg
+	# Wait until socat saves the file to disk
+	busywait "${BUSYWAIT_TIMEOUT}" test -s "${OUTPUT_FILE}"
+}
+
+# ========== #
+# Start here #
+# ========== #
+
+modprobe netdevsim 2> /dev/null || true
+modprobe netconsole 2> /dev/null || true
+
+# Check for basic system dependency and exit if not found
+check_for_dependencies
+# This test also depends on taskset(1). Check for it before starting the test
+check_for_taskset
+
+# Set current loglevel to KERN_INFO(6), and default to KERN_NOTICE(5)
+echo "6 5" > /proc/sys/kernel/printk
+# Remove the namespace, interfaces and netconsole target on exit
+trap cleanup EXIT
+# Create one namespace and two interfaces
+set_network
+# Create a dynamic target for netconsole
+create_dynamic_target
+
+#====================================================
+# TEST #1
+# Send message from a random CPU
+#====================================================
+# Random CPU in the system
+CPU=$((RANDOM % $(nproc)))
+OUTPUT_FILE="/tmp/${TARGET}_1"
+MSG="Test #1 from CPU${CPU}"
+# Enable the auto population of cpu_nr
+set_cpu_nr
+# Enable taskname to be appended to sysdata
+set_taskname
+set_release
+set_msgid
+runtest
+# Make sure the message was received in the dst part
+# and exit
+validate_release
+validate_sysdata
+
+#====================================================
+# TEST #2
+# This test now adds userdata together with sysdata
+# ===================================================
+# Get a new random CPU
+CPU=$((RANDOM % $(nproc)))
+OUTPUT_FILE="/tmp/${TARGET}_2"
+MSG="Test #2 from CPU${CPU}"
+set_user_data
+runtest
+validate_release
+validate_sysdata
+
+# ===================================================
+# TEST #3
+# Unset all sysdata, fail if any userdata is set
+# ===================================================
+CPU=$((RANDOM % $(nproc)))
+OUTPUT_FILE="/tmp/${TARGET}_3"
+MSG="Test #3 from CPU${CPU}"
+unset_cpu_nr
+unset_taskname
+unset_release
+unset_msgid
+runtest
+# At this time, cpu= shouldn't be present in the msg
+validate_no_sysdata
+
+exit "${ksft_pass}"
diff --git a/tools/testing/selftests/drivers/net/netconsole/netcons_torture.sh b/tools/testing/selftests/drivers/net/netconsole/netcons_torture.sh
new file mode 100755
index 000000000000..33a44adb6f8f
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netconsole/netcons_torture.sh
@@ -0,0 +1,130 @@
+#!/usr/bin/env bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Repeatedly send kernel messages, toggles netconsole targets on and off,
+# creates and deletes targets in parallel, and toggles the source interface to
+# simulate stress conditions.
+#
+# This test aims to verify the robustness of netconsole under dynamic
+# configurations and concurrent operations.
+#
+# The major goal is to run this test with LOCKDEP, Kmemleak and KASAN to make
+# sure no issues is reported.
+#
+# Author: Breno Leitao <leitao@debian.org>
+
+set -euo pipefail
+
+SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")")
+
+source "${SCRIPTDIR}"/../lib/sh/lib_netcons.sh
+
+# Number of times the main loop run
+ITERATIONS=${1:-150}
+
+# Only test extended format
+FORMAT="extended"
+# And ipv6 only
+IP_VERSION="ipv6"
+
+# Create, enable and delete some targets.
+create_and_delete_random_target() {
+	COUNT=2
+	RND_PREFIX=$(mktemp -u netcons_rnd_XXXX_)
+
+	if [ -d "${NETCONS_CONFIGFS}/${RND_PREFIX}${COUNT}"  ] || \
+	   [ -d "${NETCONS_CONFIGFS}/${RND_PREFIX}0" ]; then
+		echo "Function didn't finish yet, skipping it." >&2
+		return
+	fi
+
+	# enable COUNT targets
+	for i in $(seq ${COUNT})
+	do
+		RND_TARGET="${RND_PREFIX}"${i}
+		RND_TARGET_PATH="${NETCONS_CONFIGFS}"/"${RND_TARGET}"
+
+		# Basic population so the target can come up
+		_create_dynamic_target "${FORMAT}" "${RND_TARGET_PATH}"
+	done
+
+	echo "netconsole selftest: ${COUNT} additional targets were created" > /dev/kmsg
+	# disable them all
+	for i in $(seq ${COUNT})
+	do
+		RND_TARGET="${RND_PREFIX}"${i}
+		RND_TARGET_PATH="${NETCONS_CONFIGFS}"/"${RND_TARGET}"
+		if [[ $(cat "${RND_TARGET_PATH}/enabled") -eq 1 ]]
+		then
+			echo 0 > "${RND_TARGET_PATH}"/enabled
+		fi
+		rmdir "${RND_TARGET_PATH}"
+	done
+}
+
+# Disable and enable the target mid-air, while messages
+# are being transmitted.
+toggle_netcons_target() {
+	for i in $(seq 2)
+	do
+		if [ ! -d "${NETCONS_PATH}" ]
+		then
+			break
+		fi
+		echo 0 > "${NETCONS_PATH}"/enabled 2> /dev/null || true
+		# Try to enable a bit harder, given it might fail to enable
+		# Write to `enabled` might fail depending on the lock, which is
+		# highly contentious here
+		for _ in $(seq 5)
+		do
+			echo 1 > "${NETCONS_PATH}"/enabled 2> /dev/null || true
+		done
+	done
+}
+
+toggle_iface(){
+	ip link set "${SRCIF}" down
+	ip link set "${SRCIF}" up
+}
+
+# Start here
+
+modprobe netdevsim 2> /dev/null || true
+modprobe netconsole 2> /dev/null || true
+
+# Check for basic system dependency and exit if not found
+check_for_dependencies
+# Set current loglevel to KERN_INFO(6), and default to KERN_NOTICE(5)
+echo "6 5" > /proc/sys/kernel/printk
+# Remove the namespace, interfaces and netconsole target on exit
+trap cleanup EXIT
+# Create one namespace and two interfaces
+set_network "${IP_VERSION}"
+# Create a dynamic target for netconsole
+create_dynamic_target "${FORMAT}"
+
+for i in $(seq "$ITERATIONS")
+do
+	for _ in $(seq 10)
+	do
+		echo "${MSG}: ${TARGET} ${i}" > /dev/kmsg
+	done
+	wait
+
+	if (( i % 30 == 0 )); then
+		toggle_netcons_target &
+	fi
+
+	if (( i % 50 == 0 )); then
+		# create some targets, enable them, send msg and disable
+		# all in a parallel thread
+		create_and_delete_random_target &
+	fi
+
+	if (( i % 70 == 0 )); then
+		toggle_iface &
+	fi
+done
+wait
+
+exit "${EXIT_STATUS}"