diff options
Diffstat (limited to 'Documentation/devicetree')
127 files changed, 4841 insertions, 1386 deletions
diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml index 4edc47483851..c349306f0d52 100644 --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml @@ -36,9 +36,12 @@ properties: $nodename: pattern: "^tpdm(@[0-9a-f]+)$" compatible: - items: - - const: qcom,coresight-tpdm - - const: arm,primecell + oneOf: + - items: + - const: qcom,coresight-static-tpdm + - items: + - const: qcom,coresight-tpdm + - const: arm,primecell reg: maxItems: 1 @@ -147,4 +150,18 @@ examples: }; }; }; + + turing-llm-tpdm { + compatible = "qcom,coresight-static-tpdm"; + + qcom,cmb-element-bits = <32>; + + out-ports { + port { + turing_llm_tpdm_out: endpoint { + remote-endpoint = <&turing0_funnel_in1>; + }; + }; + }; + }; ... diff --git a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml index fe2c5c1baf43..a8471367175b 100644 --- a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml +++ b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml @@ -64,8 +64,6 @@ allOf: reg: minItems: 2 - '#reset-cells': false - - if: properties: compatible: @@ -85,6 +83,7 @@ examples: reg = <0x1fa20000 0x400>, <0x1fb00000 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; - | diff --git a/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt deleted file mode 100644 index 4c0807f28cfa..000000000000 --- a/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt +++ /dev/null @@ -1,29 +0,0 @@ -* Xtal Clock bindings for Marvell Armada 37xx SoCs - -Marvell Armada 37xx SoCs allow to determine the xtal clock frequencies by -reading the gpio latch register. - -This node must be a subnode of the node exposing the register address -of the GPIO block where the gpio latch is located. -See Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt - -Required properties: -- compatible : shall be one of the following: - "marvell,armada-3700-xtal-clock" -- #clock-cells : from common clock binding; shall be set to 0 - -Optional properties: -- clock-output-names : from common clock binding; allows overwrite default clock - output names ("xtal") - -Example: -pinctrl_nb: pinctrl-nb@13800 { - compatible = "armada3710-nb-pinctrl", "syscon", "simple-mfd"; - reg = <0x13800 0x100>, <0x13C00 0x20>; - - xtalclk: xtal-clk { - compatible = "marvell,armada-3700-xtal-clock"; - clock-output-names = "xtal"; - #clock-cells = <0>; - }; -}; diff --git a/Documentation/devicetree/bindings/clock/fsl,imx8ulp-sim-lpav.yaml b/Documentation/devicetree/bindings/clock/fsl,imx8ulp-sim-lpav.yaml new file mode 100644 index 000000000000..662e07528d76 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fsl,imx8ulp-sim-lpav.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fsl,imx8ulp-sim-lpav.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8ULP LPAV System Integration Module (SIM) + +maintainers: + - Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> + +description: + The i.MX8ULP LPAV subsystem contains a block control module known as + SIM LPAV, which offers functionalities such as clock gating or reset + line assertion/de-assertion. + +properties: + compatible: + const: fsl,imx8ulp-sim-lpav + + reg: + maxItems: 1 + + clocks: + maxItems: 3 + + clock-names: + items: + - const: bus + - const: core + - const: plat + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + mux-controller: + $ref: /schemas/mux/reg-mux.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - mux-controller + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8ulp-clock.h> + + clock-controller@2da50000 { + compatible = "fsl,imx8ulp-sim-lpav"; + reg = <0x2da50000 0x10000>; + clocks = <&cgc2 IMX8ULP_CLK_LPAV_BUS_DIV>, + <&cgc2 IMX8ULP_CLK_HIFI_DIVCORE>, + <&cgc2 IMX8ULP_CLK_HIFI_DIVPLAT>; + clock-names = "bus", "core", "plat"; + #clock-cells = <1>; + #reset-cells = <1>; + + mux-controller { + compatible = "reg-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x8 0x00000200>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml index caf442ead24b..31e106ef913d 100644 --- a/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml +++ b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml @@ -46,6 +46,9 @@ properties: "#clock-cells": const: 1 + power-domains: + maxItems: 1 + reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml b/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml index e4e1c31267d2..ee4f31596d97 100644 --- a/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml +++ b/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml @@ -22,16 +22,23 @@ properties: const: microchip,mpfs-clkcfg reg: - items: - - description: | - clock config registers: - These registers contain enable, reset & divider tables for the, cpu, - axi, ahb and rtc/mtimer reference clocks as well as enable and reset - for the peripheral clocks. - - description: | - mss pll dri registers: - Block of registers responsible for dynamic reconfiguration of the mss - pll + oneOf: + - items: + - description: | + clock config registers: + These registers contain enable, reset & divider tables for the, cpu, + axi, ahb and rtc/mtimer reference clocks as well as enable and reset + for the peripheral clocks. + - description: | + mss pll dri registers: + Block of registers responsible for dynamic reconfiguration of the mss + pll + deprecated: true + - items: + - description: | + mss pll dri registers: + Block of registers responsible for dynamic reconfiguration of the mss + pll clocks: maxItems: 1 @@ -69,11 +76,12 @@ examples: - | #include <dt-bindings/clock/microchip,mpfs-clock.h> soc { - #address-cells = <2>; - #size-cells = <2>; - clkcfg: clock-controller@20002000 { + #address-cells = <1>; + #size-cells = <1>; + + clkcfg: clock-controller@3E001000 { compatible = "microchip,mpfs-clkcfg"; - reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>; + reg = <0x3E001000 0x1000>; clocks = <&ref>; #clock-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml index 78fa05726685..3f5f1336262e 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml @@ -18,6 +18,7 @@ properties: compatible: enum: - qcom,glymur-rpmh-clk + - qcom,kaanapali-rpmh-clk - qcom,milos-rpmh-clk - qcom,qcs615-rpmh-clk - qcom,qdu1000-rpmh-clk diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml index fcd2727dae46..b31bd8335529 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Video Clock & Reset Controller on SM8450 maintainers: - - Taniya Das <quic_tdas@quicinc.com> + - Taniya Das <taniya.das@oss.qualcomm.com> - Jagadeesh Kona <quic_jkona@quicinc.com> description: | @@ -17,6 +17,7 @@ description: | See also: include/dt-bindings/clock/qcom,sm8450-videocc.h include/dt-bindings/clock/qcom,sm8650-videocc.h + include/dt-bindings/clock/qcom,sm8750-videocc.h properties: compatible: @@ -25,6 +26,7 @@ properties: - qcom,sm8475-videocc - qcom,sm8550-videocc - qcom,sm8650-videocc + - qcom,sm8750-videocc - qcom,x1e80100-videocc clocks: @@ -61,6 +63,7 @@ allOf: enum: - qcom,sm8450-videocc - qcom,sm8550-videocc + - qcom,sm8750-videocc then: required: - required-opps diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml index 2c992b3437f2..784fef830681 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml @@ -25,6 +25,7 @@ properties: items: - enum: - qcom,glymur-tcsr + - qcom,kaanapali-tcsr - qcom,milos-tcsr - qcom,sar2130p-tcsr - qcom,sm8550-tcsr diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8750-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8750-gcc.yaml index aab7039fd28d..0114d347b26f 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8750-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8750-gcc.yaml @@ -13,11 +13,15 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on SM8750 - See also: include/dt-bindings/clock/qcom,sm8750-gcc.h + See also: + include/dt-bindings/clock/qcom,kaanapali-gcc.h + include/dt-bindings/clock/qcom,sm8750-gcc.h properties: compatible: - const: qcom,sm8750-gcc + enum: + - qcom,kaanapali-gcc + - qcom,sm8750-gcc clocks: items: diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3506-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3506-cru.yaml new file mode 100644 index 000000000000..ca940475336c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3506-cru.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3506-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3506 Clock and Reset Unit (CRU) + +maintainers: + - Finley Xiao <finley.xiao@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: + The RK3506 CRU generates the clock and also implements reset for SoC + peripherals. + +properties: + compatible: + const: rockchip,rk3506-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + clock-controller@ff9a0000 { + compatible = "rockchip,rk3506-cru"; + reg = <0xff9a0000 0x20000>; + #clock-cells = <1>; + #reset-cells = <1>; + clocks = <&xin24m>; + clock-names = "xin"; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1126b-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rv1126b-cru.yaml new file mode 100644 index 000000000000..04b0a5c51e4e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rv1126b-cru.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rv1126b-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RV1126B Clock and Reset Unit + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: + The rv1126b clock controller generates the clock and also implements a + reset controller for SoC peripherals. + +properties: + compatible: + enum: + - rockchip,rv1126b-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + clock-controller@20000000 { + compatible = "rockchip,rv1126b-cru"; + reg = <0x20000000 0xc0000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml index 72f59db73f76..5bf905f88a1a 100644 --- a/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml +++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml @@ -38,6 +38,8 @@ properties: - samsung,exynosautov920-cmu-hsi0 - samsung,exynosautov920-cmu-hsi1 - samsung,exynosautov920-cmu-hsi2 + - samsung,exynosautov920-cmu-m2m + - samsung,exynosautov920-cmu-mfc - samsung,exynosautov920-cmu-misc - samsung,exynosautov920-cmu-peric0 - samsung,exynosautov920-cmu-peric1 @@ -226,6 +228,46 @@ allOf: - const: embd - const: ethernet + - if: + properties: + compatible: + contains: + const: samsung,exynosautov920-cmu-m2m + + then: + properties: + clocks: + items: + - description: External reference clock (38.4 MHz) + - description: CMU_M2M NOC clock (from CMU_TOP) + - description: CMU_M2M JPEG clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: noc + - const: jpeg + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov920-cmu-mfc + + then: + properties: + clocks: + items: + - description: External reference clock (38.4 MHz) + - description: CMU_MFC MFC clock (from CMU_TOP) + - description: CMU_MFC WFD clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: mfc + - const: wfd + required: - compatible - "#clock-cells" diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml index b5399c65a731..2da86037ad79 100644 --- a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml +++ b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml @@ -59,8 +59,7 @@ properties: power-domains: maxItems: 1 - dma-coherent: - description: present if dma operations are coherent + dma-coherent: true required: - "#dma-cells" diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.yaml b/Documentation/devicetree/bindings/fpga/fpga-region.yaml index 4c61461d6247..55acf0ecfa3f 100644 --- a/Documentation/devicetree/bindings/fpga/fpga-region.yaml +++ b/Documentation/devicetree/bindings/fpga/fpga-region.yaml @@ -210,9 +210,9 @@ description: | FPGA Bridges that exist on the FPGA fabric prior to the partial reconfiguration. -- - [1] www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/ug/ug_partrecon.pdf + [1] https://www.intel.com/programmable/technical-pdfs/683404.pdf [2] tspace.library.utoronto.ca/bitstream/1807/67932/1/Byma_Stuart_A_201411_MAS_thesis.pdf - [3] https://www.xilinx.com/support/documentation/sw_manuals/xilinx14_1/ug702.pdf + [3] https://docs.amd.com/v/u/en-US/ug702 properties: $nodename: diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml index 5f6467375811..e803457d3f55 100644 --- a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml +++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml @@ -14,7 +14,11 @@ allOf: properties: compatible: - const: snps,dw-i3c-master-1.00a + oneOf: + - const: snps,dw-i3c-master-1.00a + - items: + - const: altr,agilex5-dw-i3c-master + - const: snps,dw-i3c-master-1.00a reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml index a23a626bfab6..61d7ba89adc2 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml @@ -35,15 +35,17 @@ properties: spi-3wire: true interrupts: - maxItems: 1 + minItems: 1 + maxItems: 2 interrupt-names: + minItems: 1 items: - enum: [INT1, INT2] + - const: INT2 dependencies: interrupts: [ interrupt-names ] - interrupt-names: [ interrupts ] required: - compatible @@ -84,7 +86,8 @@ examples: spi-cpol; spi-cpha; interrupt-parent = <&gpio0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "INT2"; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, + <1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "INT1", "INT2"; }; }; diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml index f1ff5ff4f478..ab517720a6a7 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml @@ -11,16 +11,19 @@ maintainers: - Antoniu Miclaus <antoniu.miclaus@analog.com> description: | - The ADXL380/ADXL382 is a low noise density, low power, 3-axis - accelerometer with selectable measurement ranges. The ADXL380 - supports the ±4 g, ±8 g, and ±16 g ranges, and the ADXL382 supports - ±15 g, ±30 g, and ±60 g ranges. + The ADXL380/ADXL382 and ADXL318/ADXL319 are low noise density, + low power, 3-axis accelerometers with selectable measurement ranges. + The ADXL380 and ADXL318 support the ±4 g, ±8 g, and ±16 g ranges, + while the ADXL382 and ADXL319 support ±15 g, ±30 g, and ±60 g ranges. + https://www.analog.com/en/products/adxl318.html https://www.analog.com/en/products/adxl380.html properties: compatible: enum: + - adi,adxl318 + - adi,adxl319 - adi,adxl380 - adi,adxl382 diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml index ec643de031a3..8c820c27f781 100644 --- a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/accel/bosch,bma220.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Bosch BMA220 Trixial Acceleration Sensor +title: Bosch BMA220 Triaxial Acceleration Sensor maintainers: - Jonathan Cameron <Jonathan.Cameron@huawei.com> @@ -20,6 +20,9 @@ properties: interrupts: maxItems: 1 + spi-cpha: true + spi-cpol: true + vdda-supply: true vddd-supply: true vddio-supply: true @@ -44,8 +47,10 @@ examples: compatible = "bosch,bma220"; reg = <0>; spi-max-frequency = <2500000>; + spi-cpol; + spi-cpha; interrupt-parent = <&gpio0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml index ed849ba1b77b..ccd6a0ac1539 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml @@ -26,6 +26,11 @@ properties: compatible: enum: - adi,ad4080 + - adi,ad4081 + - adi,ad4083 + - adi,ad4084 + - adi,ad4086 + - adi,ad4087 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/adi,max14001.yaml b/Documentation/devicetree/bindings/iio/adc/adi,max14001.yaml new file mode 100644 index 000000000000..a2dc59c9dcd8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,max14001.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023-2025 Analog Devices Inc. +# Copyright 2023 Kim Seer Paller +# Copyright 2025 Marilene Andrade Garcia +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,max14001.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX14001-MAX14002 ADC + +maintainers: + - Kim Seer Paller <kimseer.paller@analog.com> + - Marilene Andrade Garcia <marilene.agarcia@gmail.com> + +description: | + Single channel 10 bit ADC with SPI interface. + Datasheet can be found here + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX14001-MAX14002.pdf + +$ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + oneOf: + - const: adi,max14002 + - items: + - const: adi,max14001 + - const: adi,max14002 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 5000000 + + vdd-supply: + description: + Isolated DC-DC power supply input voltage. + + vddl-supply: + description: + Logic power supply. + + refin-supply: + description: + ADC voltage reference supply. + + interrupts: + minItems: 1 + items: + - description: | + cout: comparator output signal that asserts high on the COUT pin + when ADC readings exceed the upper threshold and low when readings + fall below the lower threshold. + - description: | + fault: when fault reporting is enabled, the FAULT pin is asserted + low whenever one of the monitored fault conditions occurs. + + interrupt-names: + minItems: 1 + items: + - const: cout + - const: fault + +required: + - compatible + - reg + - vdd-supply + - vddl-supply + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,max14001", "adi,max14002"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-lsb-first; + vdd-supply = <&vdd>; + vddl-supply = <&vddl>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml index 5c08d8b6e995..509bfb1007c4 100644 --- a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml @@ -29,6 +29,8 @@ properties: enum: - aspeed,ast2600-adc0 - aspeed,ast2600-adc1 + - aspeed,ast2700-adc0 + - aspeed,ast2700-adc1 description: Their trimming data, which is used to calibrate internal reference volage, locates in different address of OTP. diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml index 14363389f30a..d9e825e5054f 100644 --- a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml @@ -42,6 +42,7 @@ properties: - mediatek,mt8183-auxadc - mediatek,mt8186-auxadc - mediatek,mt8188-auxadc + - mediatek,mt8189-auxadc - mediatek,mt8195-auxadc - mediatek,mt8516-auxadc - const: mediatek,mt8173-auxadc diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,r9a09g077-adc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,r9a09g077-adc.yaml new file mode 100644 index 000000000000..dc0206b28231 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/renesas,r9a09g077-adc.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/renesas,r9a09g077-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/T2H / RZ/N2H ADC12 + +maintainers: + - Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com> + +description: | + A/D Converter block is a successive approximation analog-to-digital converter + with a 12-bit accuracy. Up to 16 analog input channels can be selected. + Conversions can be performed in single or continuous mode. Result of the ADC + is stored in a 16-bit data register corresponding to each channel. + +properties: + compatible: + oneOf: + - items: + - const: renesas,r9a09g087-adc # RZ/N2H + - const: renesas,r9a09g077-adc # RZ/T2H + - items: + - const: renesas,r9a09g077-adc # RZ/T2H + + reg: + maxItems: 1 + + interrupts: + items: + - description: A/D scan end interrupt + - description: A/D scan end interrupt for Group B + - description: A/D scan end interrupt for Group C + - description: Window A compare match + - description: Window B compare match + - description: Compare match + - description: Compare mismatch + + interrupt-names: + items: + - const: adi + - const: gbadi + - const: gcadi + - const: cmpai + - const: cmpbi + - const: wcmpm + - const: wcmpum + + clocks: + items: + - description: Converter clock + - description: Peripheral clock + + clock-names: + items: + - const: adclk + - const: pclk + + power-domains: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + "#io-channel-cells": + const: 1 + +patternProperties: + "^channel@[0-9a-f]$": + $ref: adc.yaml + type: object + description: The external channels which are connected to the ADC. + + properties: + reg: + description: The channel number. + maximum: 15 + + required: + - reg + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/renesas,r9a09g077-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + adc@80008000 { + compatible = "renesas,r9a09g077-adc"; + reg = <0x80008000 0x400>; + interrupts = <GIC_SPI 708 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 709 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 710 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 855 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 856 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "adi", "gbadi", "gcadi", + "cmpai", "cmpbi", "wcmpm", "wcmpum"; + clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>, + <&cpg CPG_MOD 225>; + clock-names = "adclk", "pclk"; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + channel@0 { + reg = <0x0>; + }; + channel@1 { + reg = <0x1>; + }; + channel@2 { + reg = <0x2>; + }; + channel@3 { + reg = <0x3>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,rzn1-adc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,rzn1-adc.yaml new file mode 100644 index 000000000000..1a40352165fb --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/renesas,rzn1-adc.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/renesas,rzn1-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/N1 Analog to Digital Converter (ADC) + +maintainers: + - Herve Codina <herve.codina@bootlin.com> + +description: + The Renesas RZ/N1 ADC controller available in the Renesas RZ/N1 SoCs family + can use up to two internal ADC cores (ADC1 and ADC2) those internal cores are + handled through ADC controller virtual channels. + +properties: + compatible: + items: + - const: renesas,r9a06g032-adc # RZ/N1D + - const: renesas,rzn1-adc + + reg: + maxItems: 1 + + clocks: + items: + - description: APB internal bus clock + - description: ADC clock + + clock-names: + items: + - const: pclk + - const: adc + + power-domains: + maxItems: 1 + + adc1-avdd-supply: + description: + ADC1 analog power supply. + + adc1-vref-supply: + description: + ADC1 reference voltage supply. + + adc2-avdd-supply: + description: + ADC2 analog power supply. + + adc2-vref-supply: + description: + ADC2 reference voltage supply. + + '#io-channel-cells': + const: 1 + description: | + Channels numbers available: + if ADC1 is used (i.e. adc1-{avdd,vref}-supply present): + - 0: ADC1 IN0 + - 1: ADC1 IN1 + - 2: ADC1 IN2 + - 3: ADC1 IN3 + - 4: ADC1 IN4 + - 5: ADC1 IN6 + - 6: ADC1 IN7 + - 7: ADC1 IN8 + if ADC2 is used (i.e. adc2-{avdd,vref}-supply present): + - 8: ADC2 IN0 + - 9: ADC2 IN1 + - 10: ADC2 IN2 + - 11: ADC2 IN3 + - 12: ADC2 IN4 + - 13: ADC2 IN6 + - 14: ADC2 IN7 + - 15: ADC2 IN8 + +required: + - compatible + - reg + - clocks + - clock-names + - power-domains + - '#io-channel-cells' + +# At least one of avvd/vref supplies +anyOf: + - required: + - adc1-vref-supply + - adc1-avdd-supply + - required: + - adc2-vref-supply + - adc2-avdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r9a06g032-sysctrl.h> + + adc: adc@40065000 { + compatible = "renesas,r9a06g032-adc", "renesas,rzn1-adc"; + reg = <0x40065000 0x200>; + clocks = <&sysctrl R9A06G032_HCLK_ADC>, <&sysctrl R9A06G032_CLK_ADC>; + clock-names = "pclk", "adc"; + power-domains = <&sysctrl>; + adc1-avdd-supply = <&adc1_avdd>; + adc1-vref-supply = <&adc1_vref>; + #io-channel-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml index f776041fd08f..6769d679c907 100644 --- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml @@ -16,6 +16,9 @@ properties: - const: rockchip,rk3066-tsadc - const: rockchip,rk3399-saradc - const: rockchip,rk3528-saradc + - items: + - const: rockchip,rk3506-saradc + - const: rockchip,rk3528-saradc - const: rockchip,rk3562-saradc - const: rockchip,rk3588-saradc - items: diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5446.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5446.yaml new file mode 100644 index 000000000000..2669d2c4948b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5446.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,ad5446.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD5446 and similar DACs + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + - Nuno Sá <nuno.sa@analog.com> + +description: + Digital to Analog Converter devices supporting both SPI and I2C interfaces. + These devices feature a range of resolutions from 8-bit to 16-bit. + +properties: + compatible: + oneOf: + - description: SPI DACs + enum: + - adi,ad5300 + - adi,ad5310 + - adi,ad5320 + - adi,ad5444 + - adi,ad5446 + - adi,ad5450 + - adi,ad5451 + - adi,ad5452 + - adi,ad5453 + - adi,ad5512a + - adi,ad5541a + - adi,ad5542 + - adi,ad5542a + - adi,ad5543 + - adi,ad5553 + - adi,ad5600 + - adi,ad5601 + - adi,ad5611 + - adi,ad5621 + - adi,ad5641 + - adi,ad5620-2500 + - adi,ad5620-1250 + - adi,ad5640-2500 + - adi,ad5640-1250 + - adi,ad5660-2500 + - adi,ad5660-1250 + - adi,ad5662 + - ti,dac081s101 + - ti,dac101s101 + - ti,dac121s101 + - description: I2C DACs + enum: + - adi,ad5301 + - adi,ad5311 + - adi,ad5321 + - adi,ad5602 + - adi,ad5612 + - adi,ad5622 + + reg: + maxItems: 1 + + vcc-supply: + description: + Reference voltage supply. If not supplied, devices with internal + voltage reference will use that. + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + enum: + - adi,ad5300 + - adi,ad5310 + - adi,ad5320 + - adi,ad5444 + - adi,ad5446 + - adi,ad5450 + - adi,ad5451 + - adi,ad5452 + - adi,ad5453 + - adi,ad5512a + - adi,ad5541a + - adi,ad5542 + - adi,ad5542a + - adi,ad5543 + - adi,ad5553 + - adi,ad5600 + - adi,ad5601 + - adi,ad5611 + - adi,ad5621 + - adi,ad5641 + - adi,ad5620-2500 + - adi,ad5620-1250 + - adi,ad5640-2500 + - adi,ad5640-1250 + - adi,ad5660-2500 + - adi,ad5660-1250 + - adi,ad5662 + - ti,dac081s101 + - ti,dac101s101 + - ti,dac121s101 + then: + allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + dac@0 { + compatible = "adi,ad5446"; + reg = <0>; + vcc-supply = <&dac_vref>; + }; + }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + dac@42 { + compatible = "adi,ad5622"; + reg = <0x42>; + vcc-supply = <&dac_vref>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml b/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml index 967778fb0ce8..d4753c85ecc3 100644 --- a/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml +++ b/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml @@ -27,6 +27,14 @@ properties: LED current whilst the engine is running. First indexed value is the configuration for the RED LED, and second value is for the IR LED. + maxim,pulse-width-us: + description: | + LED pulse width in microseconds. Appropriate pulse width depends on + factors such as optical window absorption, LED-to-sensor distance, + and expected reflectivity of the skin or contact surface. + enum: [200, 400, 800, 1600] + default: 1600 + additionalProperties: false required: diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,smi330.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,smi330.yaml new file mode 100644 index 000000000000..0270ca456d2b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/bosch,smi330.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/imu/bosch,smi330.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch SMI330 6-Axis IMU + +maintainers: + - Stefan Gutmann <stefam.gutmann@de.bosch.com> + +description: + SMI330 is a 6-axis inertial measurement unit that supports acceleration and + gyroscopic measurements with hardware fifo buffering. Sensor also provides + events information such as motion, no-motion and tilt detection. + +properties: + compatible: + const: bosch,smi330 + + reg: + maxItems: 1 + + vdd-supply: + description: provide VDD power to the sensor. + + vddio-supply: + description: provide VDD IO power to the sensor. + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + enum: + - INT1 + - INT2 + + drive-open-drain: + type: boolean + description: + set if the interrupt pin(s) should be configured as + open drain. If not set, defaults to push-pull. + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + // Example for I2C + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + imu@68 { + compatible = "bosch,smi330"; + reg = <0x68>; + vddio-supply = <&vddio>; + vdd-supply = <&vdd>; + interrupt-parent = <&gpio>; + interrupts = <26 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; + }; + }; + + // Example for SPI + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + imu@0 { + compatible = "bosch,smi330"; + reg = <0>; + spi-max-frequency = <10000000>; + interrupt-parent = <&gpio>; + interrupts = <26 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm45600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm45600.yaml new file mode 100644 index 000000000000..e0b78d14420f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm45600.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/imu/invensense,icm45600.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: InvenSense ICM-45600 Inertial Measurement Unit + +maintainers: + - Remi Buisson <remi.buisson@tdk.com> + +description: | + 6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis + accelerometer. + + It has a configurable host interface that supports I3C, I2C and SPI serial + communication, features up to 8kB FIFO and 2 programmable interrupts with + ultra-low-power wake-on-motion support to minimize system power consumption. + + Other industry-leading features include InvenSense on-chip APEX Motion + Processing engine for gesture recognition, activity classification, and + pedometer, along with programmable digital filters, and an embedded + temperature sensor. + + https://invensense.tdk.com/wp-content/uploads/documentation/DS-000576_ICM-45605.pdf + +properties: + compatible: + enum: + - invensense,icm45605 + - invensense,icm45606 + - invensense,icm45608 + - invensense,icm45634 + - invensense,icm45686 + - invensense,icm45687 + - invensense,icm45688p + - invensense,icm45689 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + items: + - enum: [int1, int2] + - const: int2 + description: Choose chip interrupt pin to be used as interrupt input. + + drive-open-drain: + type: boolean + + vdd-supply: true + + vddio-supply: true + + mount-matrix: true + +required: + - compatible + - reg + - vdd-supply + - vddio-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + imu@68 { + compatible = "invensense,icm45605"; + reg = <0x68>; + interrupt-parent = <&gpio2>; + interrupt-names = "int1"; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <&vdd>; + vddio-supply = <&vddio>; + mount-matrix = "0", "-1", "0", + "1", "0", "0", + "0", "0", "1"; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml index 0bce71529e34..1af0855c33e6 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml @@ -86,7 +86,6 @@ unevaluatedProperties: false required: - compatible - reg - - interrupts examples: - | diff --git a/Documentation/devicetree/bindings/iio/pressure/aosong,adp810.yaml b/Documentation/devicetree/bindings/iio/pressure/aosong,adp810.yaml new file mode 100644 index 000000000000..ad5f26ce5043 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/aosong,adp810.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/aosong,adp810.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: aosong adp810 differential pressure sensor + +maintainers: + - Akhilesh Patil <akhilesh@ee.iitb.ac.in> + +description: + ADP810 is differential pressure and temperature sensor. It has I2C bus + interface with fixed address of 0x25. This sensor supports 8 bit CRC for + reliable data transfer. It can measure differential pressure in the + range -500 to 500Pa and temperate in the range -40 to +85 degree celsius. + +properties: + compatible: + enum: + - aosong,adp810 + + reg: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + pressure-sensor@25 { + compatible = "aosong,adp810"; + reg = <0x25>; + vdd-supply = <&vdd_regulator>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/pressure/fsl,mpl3115.yaml b/Documentation/devicetree/bindings/iio/pressure/fsl,mpl3115.yaml new file mode 100644 index 000000000000..2933c2e10695 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/fsl,mpl3115.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/fsl,mpl3115.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MPL3115 precision pressure sensor with altimetry + +maintainers: + - Antoni Pokusinski <apokusinski01@gmail.com> + +description: | + MPL3115 is a pressure/altitude and temperature sensor with I2C interface. + It features two programmable interrupt lines which indicate events such as + data ready or pressure/temperature threshold reached. + https://www.nxp.com/docs/en/data-sheet/MPL3115A2.pdf + +properties: + compatible: + const: fsl,mpl3115 + + reg: + maxItems: 1 + + vdd-supply: true + + vddio-supply: true + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + enum: + - INT1 + - INT2 + + drive-open-drain: + type: boolean + description: + set if the specified interrupt pins should be configured as + open drain. If not set, defaults to push-pull. + +required: + - compatible + - reg + - vdd-supply + - vddio-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pressure@60 { + compatible = "fsl,mpl3115"; + reg = <0x60>; + vdd-supply = <&vdd>; + vddio-supply = <&vddio>; + interrupt-parent = <&gpio1>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "INT2"; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml b/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml new file mode 100644 index 000000000000..e5d1e6c48939 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/infineon,dps310.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Infineon DPS310 barometric pressure and temperature sensor + +maintainers: + - Eddie James <eajames@linux.ibm.com> + +description: + The DPS310 is a barometric pressure and temperature sensor with an I2C + interface. + +properties: + compatible: + enum: + - infineon,dps310 + + reg: + maxItems: 1 + + "#io-channel-cells": + const: 0 + + vdd-supply: + description: + Voltage supply for the chip's analog blocks. + + vddio-supply: + description: + Digital voltage supply for the chip's digital blocks and I/O interface. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + dps: pressure-sensor@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + vdd-supply = <&vref1>; + vddio-supply = <&vref2>; + }; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,kaanapali-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,kaanapali-rpmh.yaml new file mode 100644 index 000000000000..2c3b2fd81a74 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,kaanapali-rpmh.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,kaanapali-rpmh.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPMh Network-On-Chip Interconnect on Kaanapali + +maintainers: + - Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com> + +description: | + RPMh interconnect providers support system bandwidth requirements through + RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is + able to communicate with the BCM through the Resource State Coordinator (RSC) + associated with each execution environment. Provider nodes must point to at + least one RPMh device child node pertaining to their RSC and each provider + can map to multiple RPMh resources. + + See also: include/dt-bindings/interconnect/qcom,kaanapali-rpmh.h + +properties: + compatible: + enum: + - qcom,kaanapali-aggre-noc + - qcom,kaanapali-clk-virt + - qcom,kaanapali-cnoc-main + - qcom,kaanapali-cnoc-cfg + - qcom,kaanapali-gem-noc + - qcom,kaanapali-lpass-ag-noc + - qcom,kaanapali-lpass-lpiaon-noc + - qcom,kaanapali-lpass-lpicx-noc + - qcom,kaanapali-mc-virt + - qcom,kaanapali-mmss-noc + - qcom,kaanapali-nsp-noc + - qcom,kaanapali-pcie-anoc + - qcom,kaanapali-system-noc + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 3 + +required: + - compatible + +allOf: + - $ref: qcom,rpmh-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,kaanapali-clk-virt + - qcom,kaanapali-mc-virt + then: + properties: + reg: false + else: + required: + - reg + + - if: + properties: + compatible: + contains: + enum: + - qcom,kaanapali-pcie-anoc + then: + properties: + clocks: + items: + - description: aggre-NOC PCIe AXI clock + - description: cfg-NOC PCIe a-NOC AHB clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,kaanapali-aggre-noc + then: + properties: + clocks: + items: + - description: aggre UFS PHY AXI clock + - description: aggre USB3 PRIM AXI clock + - description: RPMH CC IPA clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,kaanapali-aggre-noc + - qcom,kaanapali-pcie-anoc + then: + required: + - clocks + else: + properties: + clocks: false + +unevaluatedProperties: false + +examples: + - | + clk_virt: interconnect-0 { + compatible = "qcom,kaanapali-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre_noc: interconnect@16e0000 { + compatible = "qcom,kaanapali-aggre-noc"; + reg = <0x016e0000 0x42400>; + #interconnect-cells = <2>; + clocks = <&gcc_aggre_ufs_phy_axi_clk>, + <&gcc_aggre_usb3_prim_axi_clk>, + <&rpmhcc_ipa_clk>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml index afa4d3539f5c..17b09292000e 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml @@ -25,6 +25,7 @@ properties: - const: qcom,msm8998-bwmon # BWMON v4 - items: - enum: + - qcom,kaanapali-cpu-bwmon - qcom,qcm2290-cpu-bwmon - qcom,qcs615-cpu-bwmon - qcom,qcs8300-cpu-bwmon diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml index db19fd5c5708..71428d2cce18 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml @@ -33,18 +33,66 @@ properties: - qcom,sa8775p-pcie-anoc - qcom,sa8775p-system-noc + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 5 + required: - compatible allOf: - $ref: qcom,rpmh-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,sa8775p-aggre1-noc + then: + properties: + clocks: + items: + - description: aggre UFS PHY AXI clock + - description: aggre QUP PRIM AXI clock + - description: aggre USB2 PRIM AXI clock + - description: aggre USB3 PRIM AXI clock + - description: aggre USB3 SEC AXI clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,sa8775p-aggre2-noc + then: + properties: + clocks: + items: + - description: aggre UFS CARD AXI clock + - description: RPMH CC IPA clock unevaluatedProperties: false examples: - | - aggre1_noc: interconnect-aggre1-noc { + #include <dt-bindings/clock/qcom,sa8775p-gcc.h> + clk_virt: interconnect-clk-virt { + compatible = "qcom,sa8775p-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16c0000 { compatible = "qcom,sa8775p-aggre1-noc"; + reg = <0x016c0000 0x18080>; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_QUPV3_AXI_CLK>, + <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>; }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml index 49eb156b08e0..2dc16e4293a9 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml @@ -12,9 +12,6 @@ maintainers: description: Qualcomm RPMh-based interconnect provider on SM6350. -allOf: - - $ref: qcom,rpmh-common.yaml# - properties: compatible: enum: @@ -30,7 +27,9 @@ properties: reg: maxItems: 1 - '#interconnect-cells': true + clocks: + minItems: 1 + maxItems: 2 patternProperties: '^interconnect-[a-z0-9\-]+$': @@ -46,8 +45,6 @@ patternProperties: - qcom,sm6350-clk-virt - qcom,sm6350-compute-noc - '#interconnect-cells': true - required: - compatible @@ -57,10 +54,54 @@ required: - compatible - reg +allOf: + - $ref: qcom,rpmh-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,sm6350-aggre1-noc + then: + properties: + clocks: + items: + - description: aggre UFS PHY AXI clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm6350-aggre2-noc + then: + properties: + clocks: + items: + - description: aggre USB3 PRIM AXI clock + - description: RPMH CC IPA clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm6350-aggre1-noc + - qcom,sm6350-aggre2-noc + then: + required: + - clocks + else: + properties: + clocks: false + unevaluatedProperties: false examples: - | + #include <dt-bindings/clock/qcom,gcc-sm6350.h> + #include <dt-bindings/clock/qcom,rpmh.h> + config_noc: interconnect@1500000 { compatible = "qcom,sm6350-config-noc"; reg = <0x01500000 0x28000>; @@ -68,14 +109,16 @@ examples: qcom,bcm-voters = <&apps_bcm_voter>; }; - system_noc: interconnect@1620000 { - compatible = "qcom,sm6350-system-noc"; - reg = <0x01620000 0x17080>; + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm6350-aggre2-noc"; + reg = <0x01700000 0x1f880>; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&rpmhcc RPMH_IPA_CLK>; - clk_virt: interconnect-clk-virt { - compatible = "qcom,sm6350-clk-virt"; + compute_noc: interconnect-compute-noc { + compatible = "qcom,sm6350-compute-noc"; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml index 0e06570483ae..adb491bcc8dc 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml @@ -57,8 +57,7 @@ properties: - prstb - intb-only - timeout-sec: - maxItems: 2 + timeout-sec: true regulators: $ref: /schemas/regulator/rohm,bd96801-regulator.yaml @@ -72,7 +71,10 @@ required: - interrupt-names - regulators -additionalProperties: false +allOf: + - $ref: /schemas/watchdog/watchdog.yaml + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/mfd/syscon-common.yaml b/Documentation/devicetree/bindings/mfd/syscon-common.yaml index 451cbad467a3..14a08e7bc8bd 100644 --- a/Documentation/devicetree/bindings/mfd/syscon-common.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon-common.yaml @@ -35,9 +35,6 @@ properties: minItems: 2 maxItems: 5 # Should be enough - reg: - maxItems: 1 - reg-io-width: description: The size (in bytes) of the IO accesses that should be performed diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml index b2cb76cf9053..a8076d0e2737 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml @@ -14,7 +14,8 @@ maintainers: description: | This binding represents the on-chip eFuse OTP controller found on i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ, i.MX6SLL, - i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN i.MX8MP and i.MX93/5 SoCs. + i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN i.MX8MP, i.MX93, i.MX94, + and i.MX95. allOf: - $ref: nvmem.yaml# @@ -36,6 +37,7 @@ properties: - fsl,imx8mq-ocotp - fsl,imx8mm-ocotp - fsl,imx93-ocotp + - fsl,imx94-ocotp - fsl,imx95-ocotp - const: syscon - items: diff --git a/Documentation/devicetree/bindings/nvmem/layouts/u-boot,env.yaml b/Documentation/devicetree/bindings/nvmem/layouts/u-boot,env.yaml index 56a8f55d4a09..e9e75c38bd11 100644 --- a/Documentation/devicetree/bindings/nvmem/layouts/u-boot,env.yaml +++ b/Documentation/devicetree/bindings/nvmem/layouts/u-boot,env.yaml @@ -46,6 +46,12 @@ properties: type: object description: Command to use for automatic booting + env-size: + description: + Size in bytes of the environment data used by U-Boot for CRC + calculation. If omitted, the full NVMEM region size is used. + $ref: /schemas/types.yaml#/definitions/uint32 + ethaddr: type: object description: Ethernet interfaces base MAC address. @@ -104,6 +110,7 @@ examples: partition-u-boot-env { compatible = "brcm,env"; + env-size = <0x20000>; ethaddr { }; diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml index 4dc0d42df3e6..c9bf34ee0efb 100644 --- a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml @@ -25,7 +25,9 @@ properties: compatible: oneOf: - items: - - const: mediatek,mt8188-efuse + - enum: + - mediatek,mt8188-efuse + - mediatek,mt8189-efuse - const: mediatek,mt8186-efuse - const: mediatek,mt8186-efuse @@ -48,6 +50,7 @@ properties: - mediatek,mt7988-efuse - mediatek,mt8173-efuse - mediatek,mt8183-efuse + - mediatek,mt8189-efuse - mediatek,mt8192-efuse - mediatek,mt8195-efuse - mediatek,mt8516-efuse diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml index 3f6dc6a3a9f1..7d1612acca48 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml @@ -39,6 +39,7 @@ properties: - qcom,qcs404-qfprom - qcom,qcs615-qfprom - qcom,qcs8300-qfprom + - qcom,sa8775p-qfprom - qcom,sar2130p-qfprom - qcom,sc7180-qfprom - qcom,sc7280-qfprom diff --git a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml index 3b2aa605a551..ab4cdc4e3614 100644 --- a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml +++ b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml @@ -31,7 +31,7 @@ properties: maxItems: 1 patternProperties: - "^.*@[0-9a-f]+$": + "@[0-9a-f]+$": type: object $ref: layouts/fixed-cell.yaml unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml index f9cffbb2df07..8a00a6c58edd 100644 --- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml @@ -27,11 +27,16 @@ properties: const: 0 clocks: - maxItems: 1 + minItems: 1 + items: + - description: PHY configuration clock + - description: Alternate PHY reference clock clock-names: + minItems: 1 items: - const: phy + - const: alt power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml index b2218c151939..ff5c77ef1176 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml @@ -80,6 +80,7 @@ properties: - mediatek,mt2712-tphy - mediatek,mt6893-tphy - mediatek,mt7629-tphy + - mediatek,mt7981-tphy - mediatek,mt7986-tphy - mediatek,mt8183-tphy - mediatek,mt8186-tphy diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml index 119b4ff36dbd..48bd11410e8c 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml @@ -16,6 +16,7 @@ description: properties: compatible: enum: + - qcom,glymur-qmp-gen5x4-pcie-phy - qcom,qcs615-qmp-gen3x1-pcie-phy - qcom,qcs8300-qmp-gen4x2-pcie-phy - qcom,sa8775p-qmp-gen4x2-pcie-phy @@ -178,6 +179,7 @@ allOf: compatible: contains: enum: + - qcom,glymur-qmp-gen5x4-pcie-phy - qcom,sa8775p-qmp-gen4x2-pcie-phy - qcom,sa8775p-qmp-gen4x4-pcie-phy - qcom,sc8280xp-qmp-gen3x1-pcie-phy @@ -213,17 +215,26 @@ allOf: compatible: contains: enum: + - qcom,glymur-qmp-gen5x4-pcie-phy - qcom,sm8550-qmp-gen4x2-pcie-phy - qcom,sm8650-qmp-gen4x2-pcie-phy + - qcom,x1e80100-qmp-gen3x2-pcie-phy - qcom,x1e80100-qmp-gen4x2-pcie-phy - qcom,x1e80100-qmp-gen4x4-pcie-phy - qcom,x1e80100-qmp-gen4x8-pcie-phy + - qcom,x1p42100-qmp-gen4x4-pcie-phy then: properties: resets: minItems: 2 reset-names: minItems: 2 + else: + properties: + resets: + maxItems: 1 + reset-names: + maxItems: 1 - if: properties: diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml index c8bc512df08b..e0ec45b96bf5 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml @@ -78,10 +78,77 @@ properties: ports: $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base description: Output endpoint of the PHY + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + endpoint@0: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + description: Display Port Output lanes of the PHY when used with static mapping, + The entry index is the DP lanes index, and the number is the PHY + signal in the order RX0, TX0, TX1, RX1. + unevaluatedProperties: false + + properties: + # Static lane mappings are mutually exclusive with typec-mux/orientation-mux + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 4 + oneOf: + - items: # DisplayPort 1 lane, normal orientation + - const: 3 + - items: # DisplayPort 1 lane, flipped orientation + - const: 0 + - items: # DisplayPort 2 lanes, normal orientation + - const: 3 + - const: 2 + - items: # DisplayPort 2 lanes, flipped orientation + - const: 0 + - const: 1 + - items: # DisplayPort 4 lanes, normal orientation + - const: 3 + - const: 2 + - const: 1 + - const: 0 + - items: # DisplayPort 4 lanes, flipped orientation + - const: 0 + - const: 1 + - const: 2 + - const: 3 + required: + - data-lanes + + endpoint@1: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + description: USB Output lanes of the PHY when used with static mapping. + The entry index is the USB3 lane in the order TX then RX, and the + number is the PHY signal in the order RX0, TX0, TX1, RX1. + unevaluatedProperties: false + + properties: + # Static lane mappings are mutually exclusive with typec-mux/orientation-mux + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + oneOf: + - items: # USB3, normal orientation + - const: 1 + - const: 0 + - items: # USB3, flipped orientation + - const: 2 + - const: 3 + + required: + - data-lanes port@1: $ref: /schemas/graph.yaml#/properties/port diff --git a/Documentation/devicetree/bindings/phy/renesas,rzg3e-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,rzg3e-usb3-phy.yaml new file mode 100644 index 000000000000..b86dc7a291a4 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/renesas,rzg3e-usb3-phy.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/renesas,rzg3e-usb3-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G3E USB 3.0 PHY + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +properties: + compatible: + const: renesas,r9a09g047-usb3-phy + + reg: + maxItems: 1 + + clocks: + items: + - description: APB bus clock + - description: USB 2.0 PHY reference clock + - description: USB 3.0 PHY reference clock + + clock-names: + items: + - const: pclk + - const: core + - const: ref_alt_clk_p + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + '#phy-cells': + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - power-domains + - resets + - '#phy-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/renesas,r9a09g047-cpg.h> + + usb-phy@15870000 { + compatible = "renesas,r9a09g047-usb3-phy"; + reg = <0x15870000 0x10000>; + clocks = <&cpg CPG_MOD 0xb0>, <&cpg CPG_CORE 13>, <&cpg CPG_CORE 12>; + clock-names = "pclk", "core", "ref_alt_clk_p"; + power-domains = <&cpg>; + resets = <&cpg 0xaa>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml index 179cb4bfc424..2bbec8702a1e 100644 --- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml @@ -118,6 +118,7 @@ allOf: contains: enum: - renesas,usb2-phy-r9a09g057 + - renesas,usb2-phy-r9a08g045 - renesas,rzg2l-usb2-phy then: properties: diff --git a/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml index 46e64fa293d5..83e7c825860c 100644 --- a/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml +++ b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml @@ -18,6 +18,7 @@ properties: - rockchip,px30-dsi-dphy - rockchip,rk3128-dsi-dphy - rockchip,rk3368-dsi-dphy + - rockchip,rk3506-dsi-dphy - rockchip,rk3568-dsi-dphy - rockchip,rv1126-dsi-dphy diff --git a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml index 138923ffedfe..c686d06f5f56 100644 --- a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml +++ b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml @@ -23,16 +23,26 @@ properties: - enum: - ti,tcan1042 - ti,tcan1043 + - nxp,tja1048 + - nxp,tja1051 + - nxp,tja1057 - nxp,tjr1443 '#phy-cells': - const: 0 + enum: [0, 1] - standby-gpios: + silent-gpios: description: - gpio node to toggle standby signal on transceiver + gpio node to toggle silent signal on transceiver maxItems: 1 + standby-gpios: + description: + gpio node to toggle standby signal on transceiver. For two Items, item 1 + is for stbn1, item 2 is for stbn2. + minItems: 1 + maxItems: 2 + enable-gpios: description: gpio node to toggle enable signal on transceiver @@ -54,6 +64,59 @@ required: - compatible - '#phy-cells' +allOf: + - if: + properties: + compatible: + enum: + - nxp,tjr1443 + - ti,tcan1042 + - ti,tcan1043 + then: + properties: + '#phy-cells': + const: 0 + silent-gpios: false + standby-gpios: + maxItems: 1 + + - if: + properties: + compatible: + contains: + const: nxp,tja1048 + then: + properties: + '#phy-cells': + const: 1 + enable-gpios: false + silent-gpios: false + standby-gpios: + minItems: 2 + + - if: + properties: + compatible: + contains: + const: nxp,tja1051 + then: + properties: + '#phy-cells': + const: 0 + standby-gpios: false + + - if: + properties: + compatible: + contains: + const: nxp,tja1057 + then: + properties: + '#phy-cells': + const: 0 + enable-gpios: false + standby-gpios: false + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt deleted file mode 100644 index d13ff82f8518..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt +++ /dev/null @@ -1,170 +0,0 @@ -Actions Semi S700 Pin Controller - -This binding describes the pin controller found in the S700 SoC. - -Required Properties: - -- compatible: Should be "actions,s700-pinctrl" -- reg: Should contain the register base address and size of - the pin controller. -- clocks: phandle of the clock feeding the pin controller -- gpio-controller: Marks the device node as a GPIO controller. -- gpio-ranges: Specifies the mapping between gpio controller and - pin-controller pins. -- #gpio-cells: Should be two. The first cell is the gpio pin number - and the second cell is used for optional parameters. -- interrupt-controller: Marks the device node as an interrupt controller. -- #interrupt-cells: Specifies the number of cells needed to encode an - interrupt. Shall be set to 2. The first cell - defines the interrupt number, the second encodes - the trigger flags described in - bindings/interrupt-controller/interrupts.txt -- interrupts: The interrupt outputs from the controller. There is one GPIO - interrupt per GPIO bank. The number of interrupts listed depends - on the number of GPIO banks on the SoC. The interrupts must be - ordered by bank, starting with bank 0. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - -Pinmux functions are available only for the pin groups while pinconf -parameters are available for both pin groups and individual pins. - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -Required Properties: - -- pins: An array of strings, each string containing the name of a pin. - These pins are used for selecting the pull control and schmitt - trigger parameters. The following are the list of pins - available: - - eth_txd0, eth_txd1, eth_txd2, eth_txd3, eth_txen, eth_rxer, - eth_crs_dv, eth_rxd1, eth_rxd0, eth_rxd2, eth_rxd3, eth_ref_clk, - eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0, - i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, i2s_mclk1, - pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, ks_in0, ks_in1, ks_in2, - ks_in3, ks_out0, ks_out1, ks_out2, lvds_oep, lvds_oen, lvds_odp, - lvds_odn, lvds_ocp, lvds_ocn, lvds_obp, lvds_obn, lvds_oap, - lvds_oan, lvds_eep, lvds_een, lvds_edp, lvds_edn, lvds_ecp, - lvds_ecn, lvds_ebp, lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, - lcd0_d2, dsi_dp3, dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, - dsi_dp0, dsi_dn0, dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, - sd0_d3, sd1_d0, sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, - sd1_cmd, sd1_clk, spi0_ss, spi0_miso, uart0_rx, uart0_tx, - uart2_rx, uart2_tx, uart2_rtsb, uart2_ctsb, uart3_rx, uart3_tx, - uart3_rtsb, uart3_ctsb, i2c0_sclk, i2c0_sdata, i2c1_sclk, - i2c1_sdata, i2c2_sdata, csi_dn0, csi_dp0, csi_dn1, csi_dp1, - csi_cn, csi_cp, csi_dn2, csi_dp2, csi_dn3, csi_dp3, - sensor0_pclk, sensor0_ckout, dnand_d0, dnand_d1, dnand_d2, - dnand_d3, dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_wrb, - dnand_rdb, dnand_rdbn, dnand_dqs, dnand_dqsn, dnand_rb0, - dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1, dnand_ceb2, - dnand_ceb3, porb, clko_25m, bsel, pkg0, pkg1, pkg2, pkg3 - -- groups: An array of strings, each string containing the name of a pin - group. These pin groups are used for selecting the pinmux - functions. - rgmii_txd23_mfp, rgmii_rxd2_mfp, rgmii_rxd3_mfp, lcd0_d18_mfp, - rgmii_txd01_mfp, rgmii_txd0_mfp, rgmii_txd1_mfp, rgmii_txen_mfp, - rgmii_rxen_mfp, rgmii_rxd1_mfp, rgmii_rxd0_mfp, rgmii_ref_clk_mfp, - i2s_d0_mfp, i2s_pcm1_mfp, i2s0_pcm0_mfp, i2s1_pcm0_mfp, - i2s_d1_mfp, ks_in2_mfp, ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, - ks_out0_mfp, ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp, - dsi_dp2_mfp, lcd0_d2_mfp, dsi_dp3_mfp, dsi_dn3_mfp, dsi_dp0_mfp, - lvds_ee_pn_mfp, uart2_rx_tx_mfp, spi0_i2c_pcm_mfp, dsi_dnp1_cp_d2_mfp, - dsi_dnp1_cp_d17_mfp, lvds_e_pn_mfp, dsi_dn2_mfp, uart2_rtsb_mfp, - uart2_ctsb_mfp, uart3_rtsb_mfp, uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, - sd0_d2_d3_mfp, sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp, - uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp, uart0_tx_mfp, - i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp, pcm1_in_mfp, pcm1_clk_mfp, - pcm1_sync_mfp, pcm1_out_mfp, dnand_data_wr_mfp, dnand_acle_ce0_mfp, - nand_ceb2_mfp, nand_ceb3_mfp - - These pin groups are used for selecting the drive strength - parameters. - - sirq_drv, rgmii_txd23_drv, rgmii_rxd23_drv, rgmii_txd01_txen_drv, - rgmii_rxer_drv, rgmii_crs_drv, rgmii_rxd10_drv, rgmii_ref_clk_drv, - smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv, i2s13_drv, - pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv, lcd_d18_d2_drv, - dsi_all_drv, sd0_d0_d3_drv, sd0_cmd_drv, sd0_clk_drv, spi0_all_drv, - uart0_rx_drv, uart0_tx_drv, uart2_all_drv, i2c0_all_drv, i2c12_all_drv, - sens0_pclk_drv, sens0_ckout_drv, uart3_all_drv - -- function: An array of strings, each string containing the name of the - pinmux functions. These functions can only be selected by - the corresponding pin groups. The following are the list of - pinmux functions available: - - nor, eth_rgmii, eth_sgmii, spi0, spi1, spi2, spi3, seNs0, sens1, - uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, i2s1, - pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, p0, - sd0, sd1, sd2, i2c0, i2c1, i2c2, i2c3, dsi, lvds, usb30, - clko_25m, mipi_csi, nand, spdif, sirq0, sirq1, sirq2, bt, lcd0 - -Optional Properties: - -- bias-pull-down: No arguments. The specified pins should be configured as - pull down. -- bias-pull-up: No arguments. The specified pins should be configured as - pull up. -- input-schmitt-enable: No arguments: Enable schmitt trigger for the specified - pins -- input-schmitt-disable: No arguments: Disable schmitt trigger for the specified - pins -- drive-strength: Integer. Selects the drive strength for the specified - pins in mA. - Valid values are: - <2> - <4> - <8> - <12> - -Example: - - pinctrl: pinctrl@e01b0000 { - compatible = "actions,s700-pinctrl"; - reg = <0x0 0xe01b0000 0x0 0x1000>; - clocks = <&cmu CLK_GPIO>; - gpio-controller; - gpio-ranges = <&pinctrl 0 0 136>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - - uart3-default: uart3-default { - pinmux { - groups = "uart3_rtsb_mfp", "uart3_ctsb_mfp"; - function = "uart3"; - }; - pinconf { - groups = "uart3_all_drv"; - drive-strength = <2>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.yaml new file mode 100644 index 000000000000..9597b983c332 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.yaml @@ -0,0 +1,204 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/actions,s700-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Actions Semi S700 Pin Controller + +maintainers: + - Manivannan Sadhasivam <mani@kernel.org> + +properties: + compatible: + const: actions,s700-pinctrl + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + gpio-controller: true + + gpio-line-names: + maxItems: 136 + + gpio-ranges: true + + '#gpio-cells': + const: 2 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + interrupts: + maxItems: 5 + description: + The interrupt outputs from the controller. There is one GPIO interrupt per + GPIO bank. The interrupts must be ordered by bank, starting with + bank 0. + +additionalProperties: + type: object + description: Pin configuration subnode + additionalProperties: false + + properties: + pinmux: + description: Configure pin multiplexing. + type: object + $ref: /schemas/pinctrl/pinmux-node.yaml# + additionalProperties: false + + properties: + groups: + items: + enum: [ + rgmii_txd23_mfp, rgmii_rxd2_mfp, rgmii_rxd3_mfp, lcd0_d18_mfp, + rgmii_txd01_mfp, rgmii_txd0_mfp, rgmii_txd1_mfp, rgmii_txen_mfp, + rgmii_rxen_mfp, rgmii_rxd1_mfp, rgmii_rxd0_mfp, rgmii_ref_clk_mfp, + i2c1_dummy, i2c2_dummy, i2s_d0_mfp, i2s_pcm1_mfp, i2s0_pcm0_mfp, i2s1_pcm0_mfp, + i2s_d1_mfp, ks_in2_mfp, ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, + ks_out0_mfp, ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp, + dsi_dp2_mfp, lcd0_d2_mfp, dsi_dp3_mfp, dsi_dn3_mfp, dsi_dp0_mfp, + lvds_ee_pn_mfp, uart2_rx_tx_mfp, spi0_i2c_pcm_mfp, + dsi_dnp1_cp_d2_mfp, dsi_dnp1_cp_d17_mfp, lvds_e_pn_mfp, + dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp, + uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp, + sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp, + uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp, + uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp, pcm1_in_mfp, + pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp, dnand_data_wr_mfp, + dnand_acle_ce0_mfp, nand_ceb2_mfp, nand_ceb3_mfp + ] + + function: + items: + enum: [ + nor, eth_rgmii, eth_sgmii, spi0, spi1, spi2, spi3, seNs0, sens1, + uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, i2s1, pcm1, + pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, p0, sd0, sd1, + sd2, i2c0, i2c1, i2c2, i2c3, dsi, lvds, usb30, clko_25m, mipi_csi, + nand, spdif, sirq0, sirq1, sirq2, bt, lcd0 + ] + + required: + - groups + - function + + pinconf: + description: Configure pin-specific parameters. + type: object + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml# + - $ref: /schemas/pinctrl/pinmux-node.yaml# + additionalProperties: false + + properties: + groups: + items: + enum: [ + sirq_drv, rgmii_txd23_drv, rgmii_rxd23_drv, rgmii_txd01_txen_drv, + rgmii_rxer_drv, rgmii_crs_drv, rgmii_rxd10_drv, rgmii_ref_clk_drv, + smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv, i2s13_drv, + pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv, lcd_d18_d2_drv, + dsi_all_drv, sd0_d0_d3_drv, sd0_cmd_drv, sd0_clk_drv, + spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv, + i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv, sens0_ckout_drv, + uart3_all_drv + ] + + pins: + items: + enum: [ + eth_txd0, eth_txd1, eth_txd2, eth_txd3, eth_txen, eth_rxer, + eth_crs_dv, eth_rxd1, eth_rxd0, eth_rxd2, eth_rxd3, eth_ref_clk, + eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0, + i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, i2s_mclk1, + pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, ks_in0, ks_in1, ks_in2, + ks_in3, ks_out0, ks_out1, ks_out2, lvds_oep, lvds_oen, lvds_odp, + lvds_odn, lvds_ocp, lvds_ocn, lvds_obp, lvds_obn, lvds_oap, + lvds_oan, lvds_eep, lvds_een, lvds_edp, lvds_edn, lvds_ecp, + lvds_ecn, lvds_ebp, lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, + lcd0_d2, dsi_dp3, dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, + dsi_dp0, dsi_dn0, dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, + sd0_d3, sd1_d0, sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, + sd1_clk, spi0_ss, spi0_miso, uart0_rx, uart0_tx, uart2_rx, + uart2_tx, uart2_rtsb, uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, + uart3_ctsb, i2c0_sclk, i2c0_sdata, i2c1_sclk, i2c1_sdata, + i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0, csi_dn1, csi_dp1, csi_cn, csi_cp, + csi_dn2, csi_dp2, csi_dn3, csi_dp3, sensor0_pclk, sensor0_ckout, + dnand_d0, dnand_d1, dnand_d2, dnand_d3, dnand_d4, dnand_d5, + dnand_d6, dnand_d7, dnand_wrb, dnand_rdb, dnand_rdbn, dnand_dqs, + dnand_dqsn, dnand_rb0, dnand_ale, dnand_cle, dnand_ceb0, + dnand_ceb1, dnand_ceb2, dnand_ceb3, porb, clko_25m, bsel, pkg0, + pkg1, pkg2, pkg3 + ] + + bias-pull-down: + type: boolean + + bias-pull-up: + type: boolean + + drive-strength: + description: Selects the drive strength for the specified pins in mA. + enum: [2, 4, 8, 12] + + input-schmitt-enable: true + input-schmitt-disable: true + + oneOf: + - required: + - groups + - required: + - pins + + anyOf: + - required: [ pinmux ] + - required: [ pinconf ] + +required: + - compatible + - reg + - clocks + - gpio-controller + - gpio-ranges + - '#gpio-cells' + - interrupt-controller + - '#interrupt-cells' + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pinctrl: pinctrl@e01b0000 { + compatible = "actions,s700-pinctrl"; + reg = <0xe01b0000 0x1000>; + clocks = <&cmu 1>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 136>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + + uart3-default { + pinmux { + groups = "uart3_rtsb_mfp", "uart3_ctsb_mfp"; + function = "uart3"; + }; + pinconf { + groups = "uart3_all_drv"; + drive-strength = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt deleted file mode 100644 index 81b58dddd3ed..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt +++ /dev/null @@ -1,204 +0,0 @@ -Actions Semi S900 Pin Controller - -This binding describes the pin controller found in the S900 SoC. - -Required Properties: - -- compatible: Should be "actions,s900-pinctrl" -- reg: Should contain the register base address and size of - the pin controller. -- clocks: phandle of the clock feeding the pin controller -- gpio-controller: Marks the device node as a GPIO controller. -- gpio-ranges: Specifies the mapping between gpio controller and - pin-controller pins. -- #gpio-cells: Should be two. The first cell is the gpio pin number - and the second cell is used for optional parameters. -- interrupt-controller: Marks the device node as an interrupt controller. -- #interrupt-cells: Specifies the number of cells needed to encode an - interrupt. Shall be set to 2. The first cell - defines the interrupt number, the second encodes - the trigger flags described in - bindings/interrupt-controller/interrupts.txt -- interrupts: The interrupt outputs from the controller. There is one GPIO - interrupt per GPIO bank. The number of interrupts listed depends - on the number of GPIO banks on the SoC. The interrupts must be - ordered by bank, starting with bank 0. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - -Pinmux functions are available only for the pin groups while pinconf -parameters are available for both pin groups and individual pins. - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -Required Properties: - -- pins: An array of strings, each string containing the name of a pin. - These pins are used for selecting the pull control and schmitt - trigger parameters. The following are the list of pins - available: - - eth_txd0, eth_txd1, eth_txen, eth_rxer, eth_crs_dv, - eth_rxd1, eth_rxd0, eth_ref_clk, eth_mdc, eth_mdio, - sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0, i2s_lrclk0, - i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, i2s_mclk1, - pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, eram_a5, - eram_a6, eram_a7, eram_a8, eram_a9, eram_a10, eram_a11, - lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp, - lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, - lvds_eep, lvds_een, lvds_edp, lvds_edn, lvds_ecp, - lvds_ecn, lvds_ebp, lvds_ebn, lvds_eap, lvds_ean, - sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0, sd1_d1, - sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk, - spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx, - uart0_tx, uart2_rx, uart2_tx, uart2_rtsb, uart2_ctsb, - uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb, uart4_rx, - uart4_tx, i2c0_sclk, i2c0_sdata, i2c1_sclk, i2c1_sdata, - i2c2_sclk, i2c2_sdata, csi0_dn0, csi0_dp0, csi0_dn1, - csi0_dp1, csi0_cn, csi0_cp, csi0_dn2, csi0_dp2, csi0_dn3, - csi0_dp3, dsi_dp3, dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, - dsi_cn, dsi_dp0, dsi_dn0, dsi_dp2, dsi_dn2, sensor0_pclk, - csi1_dn0,csi1_dp0,csi1_dn1, csi1_dp1, csi1_cn, csi1_cp, - sensor0_ckout, nand0_d0, nand0_d1, nand0_d2, nand0_d3, - nand0_d4, nand0_d5, nand0_d6, nand0_d7, nand0_dqs, - nand0_dqsn, nand0_ale, nand0_cle, nand0_ceb0, nand0_ceb1, - nand0_ceb2, nand0_ceb3, nand1_d0, nand1_d1, nand1_d2, - nand1_d3, nand1_d4, nand1_d5, nand1_d6, nand1_d7, nand1_dqs, - nand1_dqsn, nand1_ale, nand1_cle, nand1_ceb0, nand1_ceb1, - nand1_ceb2, nand1_ceb3, sgpio0, sgpio1, sgpio2, sgpio3 - -- groups: An array of strings, each string containing the name of a pin - group. These pin groups are used for selecting the pinmux - functions. - - lvds_oxx_uart4_mfp, rmii_mdc_mfp, rmii_mdio_mfp, sirq0_mfp, - sirq1_mfp, rmii_txd0_mfp, rmii_txd1_mfp, rmii_txen_mfp, - rmii_rxer_mfp, rmii_crs_dv_mfp, rmii_rxd1_mfp, rmii_rxd0_mfp, - rmii_ref_clk_mfp, i2s_d0_mfp, i2s_d1_mfp, i2s_lr_m_clk0_mfp, - i2s_bclk0_mfp, i2s_bclk1_mclk1_mfp, pcm1_in_out_mfp, - pcm1_clk_mfp, pcm1_sync_mfp, eram_a5_mfp, eram_a6_mfp, - eram_a7_mfp, eram_a8_mfp, eram_a9_mfp, eram_a10_mfp, - eram_a11_mfp, lvds_oep_odn_mfp, lvds_ocp_obn_mfp, - lvds_oap_oan_mfp, lvds_e_mfp, spi0_sclk_mosi_mfp, spi0_ss_mfp, - spi0_miso_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp, - uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp, - sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_clk_mfp, - uart0_rx_mfp, nand0_d0_ceb3_mfp, uart0_tx_mfp, i2c0_mfp, - csi0_cn_cp_mfp, csi0_dn0_dp3_mfp, csi1_dn0_cp_mfp, - dsi_dp3_dn1_mfp, dsi_cp_dn0_mfp, dsi_dp2_dn2_mfp, - nand1_d0_ceb1_mfp, nand1_ceb3_mfp, nand1_ceb0_mfp, - csi1_dn0_dp0_mfp, uart4_rx_tx_mfp - - - These pin groups are used for selecting the drive strength - parameters. - - sgpio3_drv, sgpio2_drv, sgpio1_drv, sgpio0_drv, - rmii_tx_d0_d1_drv, rmii_txen_rxer_drv, rmii_crs_dv_drv, - rmii_rx_d1_d0_drv, rmii_ref_clk_drv, rmii_mdc_mdio_drv, - sirq_0_1_drv, sirq2_drv, i2s_d0_d1_drv, i2s_lr_m_clk0_drv, - i2s_blk1_mclk1_drv, pcm1_in_out_drv, lvds_oap_oan_drv, - lvds_oep_odn_drv, lvds_ocp_obn_drv, lvds_e_drv, sd0_d3_d0_drv, - sd1_d3_d0_drv, sd0_sd1_cmd_clk_drv, spi0_sclk_mosi_drv, - spi0_ss_miso_drv, uart0_rx_tx_drv, uart4_rx_tx_drv, uart2_drv, - uart3_drv, i2c0_drv, i2c1_drv, i2c2_drv, sensor0_drv - - These pin groups are used for selecting the slew rate - parameters. - - sgpio3_sr, sgpio2_sr, sgpio1_sr, sgpio0_sr, rmii_tx_d0_d1_sr, - rmii_txen_rxer_sr, rmii_crs_dv_sr, rmii_rx_d1_d0_sr, - rmii_ref_clk_sr, rmii_mdc_mdio_sr, sirq_0_1_sr, sirq2_sr, - i2s_do_d1_sr, i2s_lr_m_clk0_sr, i2s_bclk0_mclk1_sr, - pcm1_in_out_sr, sd1_d3_d0_sr, sd0_sd1_clk_cmd_sr, - spi0_sclk_mosi_sr, spi0_ss_miso_sr, uart0_rx_tx_sr, - uart4_rx_tx_sr, uart2_sr, uart3_sr, i2c0_sr, i2c1_sr, i2c2_sr, - sensor0_sr - -- function: An array of strings, each string containing the name of the - pinmux functions. These functions can only be selected by - the corresponding pin groups. The following are the list of - pinmux functions available: - - eram, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0, - uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, i2s1, - pcm0, pcm1, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, sd0, - sd1, sd2, sd3, i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, lvds, - usb30, usb20, gpu, mipi_csi0, mipi_csi1, mipi_dsi, nand0, - nand1, spdif, sirq0, sirq1, sirq2 - -Optional Properties: - -- bias-bus-hold: No arguments. The specified pins should retain the previous - state value. -- bias-high-impedance: No arguments. The specified pins should be configured - as high impedance. -- bias-pull-down: No arguments. The specified pins should be configured as - pull down. -- bias-pull-up: No arguments. The specified pins should be configured as - pull up. -- input-schmitt-enable: No arguments: Enable schmitt trigger for the specified - pins -- input-schmitt-disable: No arguments: Disable schmitt trigger for the specified - pins -- slew-rate: Integer. Sets slew rate for the specified pins. - Valid values are: - <0> - Slow - <1> - Fast -- drive-strength: Integer. Selects the drive strength for the specified - pins in mA. - Valid values are: - <2> - <4> - <8> - <12> - -Example: - - pinctrl: pinctrl@e01b0000 { - compatible = "actions,s900-pinctrl"; - reg = <0x0 0xe01b0000 0x0 0x1000>; - clocks = <&cmu CLK_GPIO>; - gpio-controller; - gpio-ranges = <&pinctrl 0 0 146>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - - uart2-default: uart2-default { - pinmux { - groups = "lvds_oep_odn_mfp"; - function = "uart2"; - }; - pinconf { - groups = "lvds_oep_odn_drv"; - drive-strength = <12>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.yaml new file mode 100644 index 000000000000..5c7b9f13226d --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.yaml @@ -0,0 +1,219 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/actions,s900-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Actions Semi S900 Pin Controller + +maintainers: + - Manivannan Sadhasivam <mani@kernel.org> + +properties: + compatible: + const: actions,s900-pinctrl + + reg: + maxItems: 1 + + interrupts: + maxItems: 6 + description: The interrupt outputs from the controller. There is one GPIO + interrupt per GPIO bank. The number of interrupts listed depends on the + number of GPIO banks on the SoC. The interrupts must be ordered by bank, + starting with bank 0. + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + clocks: + maxItems: 1 + + gpio-controller: true + + gpio-line-names: + maxItems: 146 + + gpio-ranges: true + + "#gpio-cells": + const: 2 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - clocks + - gpio-controller + - gpio-ranges + - "#gpio-cells" + +additionalProperties: + type: object + description: Pin configuration subnode + additionalProperties: false + + properties: + pinmux: + type: object + description: Pin mux configuration + $ref: /schemas/pinctrl/pinmux-node.yaml# + additionalProperties: false + + properties: + groups: + items: + enum: [ + lvds_oxx_uart4_mfp, rmii_mdc_mfp, rmii_mdio_mfp, sirq0_mfp, + sirq1_mfp, rmii_txd0_mfp, rmii_txd1_mfp, rmii_txen_mfp, + rmii_rxer_mfp, rmii_crs_dv_mfp, rmii_rxd1_mfp, rmii_rxd0_mfp, + rmii_ref_clk_mfp, i2s_d0_mfp, i2s_d1_mfp, i2s_lr_m_clk0_mfp, + i2s_bclk0_mfp, i2s_bclk1_mclk1_mfp, pcm1_in_out_mfp, pcm1_clk_mfp, + pcm1_sync_mfp, eram_a5_mfp, eram_a6_mfp, eram_a7_mfp, eram_a8_mfp, + eram_a9_mfp, eram_a10_mfp, eram_a11_mfp, lvds_oep_odn_mfp, + lvds_ocp_obn_mfp, lvds_oap_oan_mfp, lvds_e_mfp, + spi0_sclk_mosi_mfp, spi0_ss_mfp, spi0_miso_mfp, uart2_rtsb_mfp, + uart2_ctsb_mfp, uart3_rtsb_mfp, uart3_ctsb_mfp, sd0_d0_mfp, + sd0_d1_mfp, sd0_d2_d3_mfp, sd1_d0_d3_mfp, sd0_cmd_mfp, + sd0_clk_mfp, sd1_cmd_clk_mfp, uart0_rx_mfp, nand0_d0_ceb3_mfp, + uart0_tx_mfp, i2c0_mfp, csi0_cn_cp_mfp, csi0_dn0_dp3_mfp, + csi1_dn0_cp_mfp, dsi_dp3_dn1_mfp, dsi_cp_dn0_mfp, dsi_dp2_dn2_mfp, + nand1_d0_ceb1_mfp, nand1_ceb3_mfp, nand1_ceb0_mfp, + csi1_dn0_dp0_mfp, uart4_rx_tx_mfp + ] + + function: + items: + enum: [ + eram, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0, + uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, i2s1, + pcm0, pcm1, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, sd0, + sd1, sd2, sd3, i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, lvds, + usb30, usb20, gpu, mipi_csi0, mipi_csi1, mipi_dsi, nand0, + nand1, spdif, sirq0, sirq1, sirq2 + ] + + required: + - groups + - function + + pinconf: + type: object + description: Pin configuration parameters + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml# + - $ref: /schemas/pinctrl/pinmux-node.yaml# + + additionalProperties: false + + properties: + groups: + items: + enum: [ + # pin groups for drive strength + sgpio3_drv, sgpio2_drv, sgpio1_drv, sgpio0_drv, rmii_tx_d0_d1_drv, + rmii_txen_rxer_drv, rmii_crs_dv_drv, rmii_rx_d1_d0_drv, + rmii_ref_clk_drv, rmii_mdc_mdio_drv, sirq_0_1_drv, sirq2_drv, + i2s_d0_d1_drv, i2s_lr_m_clk0_drv, i2s_blk1_mclk1_drv, + pcm1_in_out_drv, lvds_oap_oan_drv, lvds_oep_odn_drv, + lvds_ocp_obn_drv, lvds_e_drv, sd0_d3_d0_drv, sd1_d3_d0_drv, + sd0_sd1_cmd_clk_drv, spi0_sclk_mosi_drv, spi0_ss_miso_drv, + uart0_rx_tx_drv, uart4_rx_tx_drv, uart2_drv, uart3_drv, i2c0_drv, + i2c1_drv, i2c2_drv, sensor0_drv, + # pin groups for slew rate + sgpio3_sr, sgpio2_sr, sgpio1_sr, sgpio0_sr, rmii_tx_d0_d1_sr, + rmii_txen_rxer_sr, rmii_crs_dv_sr, rmii_rx_d1_d0_sr, + rmii_ref_clk_sr, rmii_mdc_mdio_sr, sirq_0_1_sr, sirq2_sr, + i2s_do_d1_sr, i2s_lr_m_clk0_sr, i2s_bclk0_mclk1_sr, + pcm1_in_out_sr, sd1_d3_d0_sr, sd0_sd1_clk_cmd_sr, + spi0_sclk_mosi_sr, spi0_ss_miso_sr, uart0_rx_tx_sr, + uart4_rx_tx_sr, uart2_sr, uart3_sr, i2c0_sr, i2c1_sr, i2c2_sr, + sensor0_sr + ] + + pins: + items: + enum: [ + eth_txd0, eth_txd1, eth_txen, eth_rxer, eth_crs_dv, eth_rxd1, + eth_rxd0, eth_ref_clk, eth_mdc, eth_mdio, sirq0, sirq1, sirq2, + i2s_d0, i2s_bclk0, i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, + i2s_lrclk1, i2s_mclk1, pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, + eram_a5, eram_a6, eram_a7, eram_a8, eram_a9, eram_a10, eram_a11, + lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp, lvds_ocn, + lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep, lvds_een, + lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp, lvds_ebn, + lvds_eap, lvds_ean, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0, + sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk, + spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx, uart0_tx, + uart2_rx, uart2_tx, uart2_rtsb, uart2_ctsb, uart3_rx, uart3_tx, + uart3_rtsb, uart3_ctsb, uart4_rx, uart4_tx, i2c0_sclk, i2c0_sdata, + i2c1_sclk, i2c1_sdata, i2c2_sclk, i2c2_sdata, csi0_dn0, csi0_dp0, + csi0_dn1, csi0_dp1, csi0_cn, csi0_cp, csi0_dn2, csi0_dp2, + csi0_dn3, csi0_dp3, dsi_dp3, dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, + dsi_cn, dsi_dp0, dsi_dn0, dsi_dp2, dsi_dn2, sensor0_pclk, + csi1_dn0, csi1_dp0, csi1_dn1, csi1_dp1, csi1_cn, csi1_cp, + sensor0_ckout, nand0_d0, nand0_d1, nand0_d2, nand0_d3, nand0_d4, + nand0_d5, nand0_d6, nand0_d7, nand0_dqs, nand0_dqsn, nand0_ale, + nand0_cle, nand0_ceb0, nand0_ceb1, nand0_ceb2, nand0_ceb3, + nand1_d0, nand1_d1, nand1_d2, nand1_d3, nand1_d4, nand1_d5, + nand1_d6, nand1_d7, nand1_dqs, nand1_dqsn, nand1_ale, nand1_cle, + nand1_ceb0, nand1_ceb1, nand1_ceb2, nand1_ceb3, sgpio0, sgpio1, + sgpio2, sgpio3 + ] + + bias-bus-hold: true + bias-high-impedance: true + + bias-pull-down: + type: boolean + + bias-pull-up: + type: boolean + + input-schmitt-enable: true + input-schmitt-disable: true + slew-rate: true + drive-strength: true + + oneOf: + - required: + - groups + - required: + - pins + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pinctrl: pinctrl@e01b0000 { + compatible = "actions,s900-pinctrl"; + reg = <0xe01b0000 0x1000>; + clocks = <&cmu 1>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + + uart2-default { + pinmux { + groups = "lvds_oep_odn_mfp"; + function = "uart2"; + }; + + pinconf { + groups = "lvds_oep_odn_drv"; + drive-strength = <12>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/airoha,an7583-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/airoha,an7583-pinctrl.yaml new file mode 100644 index 000000000000..79910214d9b5 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/airoha,an7583-pinctrl.yaml @@ -0,0 +1,402 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/airoha,an7583-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Airoha AN7583 Pin Controller + +maintainers: + - Lorenzo Bianconi <lorenzo@kernel.org> + +description: + The Airoha's AN7583 Pin controller is used to control SoC pins. + +properties: + compatible: + const: airoha,an7583-pinctrl + + interrupts: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + gpio-ranges: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - interrupts + - gpio-controller + - "#gpio-cells" + - interrupt-controller + - "#interrupt-cells" + +patternProperties: + '-pins$': + type: object + + patternProperties: + '^mux(-|$)': + type: object + + description: + pinmux configuration nodes. + + $ref: /schemas/pinctrl/pinmux-node.yaml + + properties: + function: + description: + A string containing the name of the function to mux to the group. + enum: [pon, tod_1pps, sipo, mdio, uart, i2c, jtag, pcm, spi, + pcm_spi, i2s, emmc, pnand, pcie_reset, pwm, phy1_led0, + phy2_led0, phy3_led0, phy4_led0, phy1_led1, phy2_led1, + phy3_led1, phy4_led1] + + groups: + description: + An array of strings. Each string contains the name of a group. + + required: + - function + - groups + + allOf: + - if: + properties: + function: + const: pon + then: + properties: + groups: + enum: [pon] + - if: + properties: + function: + const: tod_1pps + then: + properties: + groups: + enum: [pon_tod_1pps, gsw_tod_1pps] + - if: + properties: + function: + const: sipo + then: + properties: + groups: + enum: [sipo, sipo_rclk] + - if: + properties: + function: + const: mdio + then: + properties: + groups: + enum: [mdio] + - if: + properties: + function: + const: uart + then: + properties: + groups: + items: + enum: [uart2, uart2_cts_rts, hsuart, hsuart_cts_rts, + uart4, uart5] + maxItems: 2 + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [i2c1] + - if: + properties: + function: + const: jtag + then: + properties: + groups: + enum: [jtag_udi, jtag_dfd] + - if: + properties: + function: + const: pcm + then: + properties: + groups: + enum: [pcm1, pcm2] + - if: + properties: + function: + const: spi + then: + properties: + groups: + items: + enum: [spi_quad, spi_cs1] + maxItems: 2 + - if: + properties: + function: + const: pcm_spi + then: + properties: + groups: + items: + enum: [pcm_spi, pcm_spi_int, pcm_spi_rst, pcm_spi_cs1, + pcm_spi_cs2, pcm_spi_cs3, pcm_spi_cs4] + maxItems: 7 + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [i2s] + - if: + properties: + function: + const: emmc + then: + properties: + groups: + enum: [emmc] + - if: + properties: + function: + const: pnand + then: + properties: + groups: + enum: [pnand] + - if: + properties: + function: + const: pcie_reset + then: + properties: + groups: + enum: [pcie_reset0, pcie_reset1] + - if: + properties: + function: + const: pwm + then: + properties: + groups: + enum: [gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, + gpio7, gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, + gpio14, gpio15, gpio16, gpio17, gpio18, gpio19, + gpio20, gpio21, gpio22, gpio23, gpio24, gpio25, + gpio26, gpio27, gpio28, gpio29, gpio30, gpio31, + gpio36, gpio37, gpio38, gpio39, gpio40, gpio41, + gpio42, gpio43, gpio44, gpio45, gpio46, gpio47] + - if: + properties: + function: + const: phy1_led0 + then: + properties: + groups: + enum: [gpio1, gpio2, gpio3, gpio4] + - if: + properties: + function: + const: phy2_led0 + then: + properties: + groups: + enum: [gpio1, gpio2, gpio3, gpio4] + - if: + properties: + function: + const: phy3_led0 + then: + properties: + groups: + enum: [gpio1, gpio2, gpio3, gpio4] + - if: + properties: + function: + const: phy4_led0 + then: + properties: + groups: + enum: [gpio1, gpio2, gpio3, gpio4] + - if: + properties: + function: + const: phy1_led1 + then: + properties: + groups: + enum: [gpio8, gpio9, gpio10, gpio11] + - if: + properties: + function: + const: phy2_led1 + then: + properties: + groups: + enum: [gpio8, gpio9, gpio10, gpio11] + - if: + properties: + function: + const: phy3_led1 + then: + properties: + groups: + enum: [gpio8, gpio9, gpio10, gpio11] + - if: + properties: + function: + const: phy4_led1 + then: + properties: + groups: + enum: [gpio8, gpio9, gpio10, gpio11] + + additionalProperties: false + + '^conf(-|$)': + type: object + + description: + pinconf configuration nodes. + + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + pins: + description: + An array of strings. Each string contains the name of a pin. + items: + enum: [uart1_txd, uart1_rxd, i2c_scl, i2c_sda, spi_cs0, spi_clk, + spi_mosi, spi_miso, gpio0, gpio1, gpio2, gpio3, gpio4, + gpio5, gpio6, gpio7, gpio8, gpio9, gpio10, gpio11, gpio12, + gpio13, gpio14, gpio15, gpio16, gpio17, gpio18, gpio19, + gpio20, gpio21, gpio22, gpio23, gpio24, gpio25, gpio26, + gpio27, gpio28, gpio29, gpio30, gpio31, gpio32, gpio33, + gpio34, gpio35, gpio36, gpio37, gpio38, gpio39, gpio40, + gpio41, gpio42, gpio43, gpio44, gpio45, gpio46, + pcie_reset0, pcie_reset1, pcie_reset2] + minItems: 1 + maxItems: 58 + + bias-disable: true + + bias-pull-up: true + + bias-pull-down: true + + input-enable: true + + output-enable: true + + output-low: true + + output-high: true + + drive-open-drain: true + + drive-strength: + description: + Selects the drive strength for MIO pins, in mA. + enum: [2, 4, 6, 8] + + required: + - pins + + additionalProperties: false + + additionalProperties: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pinctrl { + compatible = "airoha,an7583-pinctrl"; + + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + pcie1-rst-pins { + conf { + pins = "pcie_reset1"; + drive-open-drain = <1>; + }; + }; + + pwm-pins { + mux { + function = "pwm"; + groups = "gpio18"; + }; + }; + + spi-pins { + mux { + function = "spi"; + groups = "spi_quad", "spi_cs1"; + }; + }; + + uart2-pins { + mux { + function = "uart"; + groups = "uart2", "uart2_cts_rts"; + }; + }; + + uar5-pins { + mux { + function = "uart"; + groups = "uart5"; + }; + }; + + mmc-pins { + mux { + function = "emmc"; + groups = "emmc"; + }; + }; + + mdio-pins { + mux { + function = "mdio"; + groups = "mdio"; + }; + + conf { + pins = "gpio2"; + output-enable; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index 80974c46f3ef..af8979af9b45 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -141,6 +141,7 @@ additionalProperties: - NRTS3 - NRTS4 - OSCCLK + - PCIERC1 - PEWAKE - PWM0 - PWM1 @@ -369,6 +370,7 @@ additionalProperties: - NRTS3 - NRTS4 - OSCCLK + - PCIERC1 - PEWAKE - PWM0 - PWM1 diff --git a/Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt deleted file mode 100644 index 0a2d5516e1f3..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt +++ /dev/null @@ -1,47 +0,0 @@ -* Pin-controller driver for the Marvell Berlin SoCs - -Pin control registers are part of both chip controller and system -controller register sets. Pin controller nodes should be a sub-node of -either the chip controller or system controller node. The pins -controlled are organized in groups, so no actual pin information is -needed. - -A pin-controller node should contain subnodes representing the pin group -configurations, one per function. Each subnode has the group name and -the muxing function used. - -Be aware the Marvell Berlin datasheets use the keyword 'mode' for what -is called a 'function' in the pin-controller subsystem. - -Required properties: -- compatible: should be one of: - "marvell,berlin2-soc-pinctrl", - "marvell,berlin2-system-pinctrl", - "marvell,berlin2cd-soc-pinctrl", - "marvell,berlin2cd-system-pinctrl", - "marvell,berlin2q-soc-pinctrl", - "marvell,berlin2q-system-pinctrl", - "marvell,berlin4ct-avio-pinctrl", - "marvell,berlin4ct-soc-pinctrl", - "marvell,berlin4ct-system-pinctrl", - "syna,as370-soc-pinctrl" - -Required subnode-properties: -- groups: a list of strings describing the group names. -- function: a string describing the function used to mux the groups. - -Example: - -sys_pinctrl: pin-controller { - compatible = "marvell,berlin2q-system-pinctrl"; - - uart0_pmux: uart0-pmux { - groups = "GSM12"; - function = "uart0"; - }; -}; - -&uart0 { - pinctrl-0 = <&uart0_pmux>; - pinctrl-names = "default"; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt deleted file mode 100644 index 4980776122cc..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt +++ /dev/null @@ -1,126 +0,0 @@ -Bitmain BM1880 Pin Controller - -This binding describes the pin controller found in the BM1880 SoC. - -Required Properties: - -- compatible: Should be "bitmain,bm1880-pinctrl" -- reg: Offset and length of pinctrl space in SCTRL. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration for BM1880 SoC -includes pinmux and various pin configuration parameters, such as pull-up, -slew rate etc... - -Each configuration node can consist of multiple nodes describing the pinmux -options. The name of each subnode is not important; all subnodes should be -enumerated and processed purely based on their content. - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pinmux subnode: - -Required Properties: - -- pins: An array of strings, each string containing the name of a pin. - Valid values for pins are: - - MIO0 - MIO111 - -- groups: An array of strings, each string containing the name of a pin - group. Valid values for groups are: - - nand_grp, spi_grp, emmc_grp, sdio_grp, eth0_grp, pwm0_grp, - pwm1_grp, pwm2_grp, pwm3_grp, pwm4_grp, pwm5_grp, pwm6_grp, - pwm7_grp, pwm8_grp, pwm9_grp, pwm10_grp, pwm11_grp, pwm12_grp, - pwm13_grp, pwm14_grp, pwm15_grp, pwm16_grp, pwm17_grp, - pwm18_grp, pwm19_grp, pwm20_grp, pwm21_grp, pwm22_grp, - pwm23_grp, pwm24_grp, pwm25_grp, pwm26_grp, pwm27_grp, - pwm28_grp, pwm29_grp, pwm30_grp, pwm31_grp, pwm32_grp, - pwm33_grp, pwm34_grp, pwm35_grp, pwm36_grp, i2c0_grp, - i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp, uart0_grp, uart1_grp, - uart2_grp, uart3_grp, uart4_grp, uart5_grp, uart6_grp, - uart7_grp, uart8_grp, uart9_grp, uart10_grp, uart11_grp, - uart12_grp, uart13_grp, uart14_grp, uart15_grp, gpio0_grp, - gpio1_grp, gpio2_grp, gpio3_grp, gpio4_grp, gpio5_grp, - gpio6_grp, gpio7_grp, gpio8_grp, gpio9_grp, gpio10_grp, - gpio11_grp, gpio12_grp, gpio13_grp, gpio14_grp, gpio15_grp, - gpio16_grp, gpio17_grp, gpio18_grp, gpio19_grp, gpio20_grp, - gpio21_grp, gpio22_grp, gpio23_grp, gpio24_grp, gpio25_grp, - gpio26_grp, gpio27_grp, gpio28_grp, gpio29_grp, gpio30_grp, - gpio31_grp, gpio32_grp, gpio33_grp, gpio34_grp, gpio35_grp, - gpio36_grp, gpio37_grp, gpio38_grp, gpio39_grp, gpio40_grp, - gpio41_grp, gpio42_grp, gpio43_grp, gpio44_grp, gpio45_grp, - gpio46_grp, gpio47_grp, gpio48_grp, gpio49_grp, gpio50_grp, - gpio51_grp, gpio52_grp, gpio53_grp, gpio54_grp, gpio55_grp, - gpio56_grp, gpio57_grp, gpio58_grp, gpio59_grp, gpio60_grp, - gpio61_grp, gpio62_grp, gpio63_grp, gpio64_grp, gpio65_grp, - gpio66_grp, gpio67_grp, eth1_grp, i2s0_grp, i2s0_mclkin_grp, - i2s1_grp, i2s1_mclkin_grp, spi0_grp - -- function: An array of strings, each string containing the name of the - pinmux functions. The following are the list of pinmux - functions available: - - nand, spi, emmc, sdio, eth0, pwm0, pwm1, pwm2, pwm3, pwm4, - pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11, pwm12, pwm13, - pwm14, pwm15, pwm16, pwm17, pwm18, pwm19, pwm20, pwm21, pwm22, - pwm23, pwm24, pwm25, pwm26, pwm27, pwm28, pwm29, pwm30, pwm31, - pwm32, pwm33, pwm34, pwm35, pwm36, i2c0, i2c1, i2c2, i2c3, - i2c4, uart0, uart1, uart2, uart3, uart4, uart5, uart6, uart7, - uart8, uart9, uart10, uart11, uart12, uart13, uart14, uart15, - gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, gpio8, - gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, gpio15, gpio16, - gpio17, gpio18, gpio19, gpio20, gpio21, gpio22, gpio23, - gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30, - gpio31, gpio32, gpio33, gpio34, gpio35, gpio36, gpio37, - gpio38, gpio39, gpio40, gpio41, gpio42, gpio43, gpio44, - gpio45, gpio46, gpio47, gpio48, gpio49, gpio50, gpio51, - gpio52, gpio53, gpio54, gpio55, gpio56, gpio57, gpio58, - gpio59, gpio60, gpio61, gpio62, gpio63, gpio64, gpio65, - gpio66, gpio67, eth1, i2s0, i2s0_mclkin, i2s1, i2s1_mclkin, - spi0 - -Optional Properties: - -- bias-disable: No arguments. Disable pin bias. -- bias-pull-down: No arguments. The specified pins should be configured as - pull down. -- bias-pull-up: No arguments. The specified pins should be configured as - pull up. -- input-schmitt-enable: No arguments: Enable schmitt trigger for the specified - pins -- input-schmitt-disable: No arguments: Disable schmitt trigger for the specified - pins -- slew-rate: Integer. Sets slew rate for the specified pins. - Valid values are: - <0> - Slow - <1> - Fast -- drive-strength: Integer. Selects the drive strength for the specified - pins in mA. - Valid values are: - <4> - <8> - <12> - <16> - <20> - <24> - <28> - <32> - -Example: - pinctrl: pinctrl@400 { - compatible = "bitmain,bm1880-pinctrl"; - reg = <0x400 0x120>; - - pinctrl_uart0_default: uart0-default { - pinmux { - groups = "uart0_grp"; - function = "uart0"; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.yaml new file mode 100644 index 000000000000..542be9870838 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/bitmain,bm1880-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bitmain BM1880 Pin Controller + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +properties: + compatible: + const: bitmain,bm1880-pinctrl + + reg: + maxItems: 1 + +additionalProperties: + description: A pin configuration node. + type: object + additionalProperties: false + + properties: + pinmux: + type: object + description: Pin multiplexing parameters. + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml# + - $ref: /schemas/pinctrl/pinmux-node.yaml# + additionalProperties: false + + properties: + pins: + items: + pattern: '^MIO[0-9]+$' + + groups: + items: + enum: [ + nand_grp, spi_grp, emmc_grp, sdio_grp, eth0_grp, pwm0_grp, + pwm1_grp, pwm2_grp, pwm3_grp, pwm4_grp, pwm5_grp, pwm6_grp, + pwm7_grp, pwm8_grp, pwm9_grp, pwm10_grp, pwm11_grp, pwm12_grp, + pwm13_grp, pwm14_grp, pwm15_grp, pwm16_grp, pwm17_grp, + pwm18_grp, pwm19_grp, pwm20_grp, pwm21_grp, pwm22_grp, + pwm23_grp, pwm24_grp, pwm25_grp, pwm26_grp, pwm27_grp, + pwm28_grp, pwm29_grp, pwm30_grp, pwm31_grp, pwm32_grp, + pwm33_grp, pwm34_grp, pwm35_grp, pwm36_grp, i2c0_grp, + i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp, uart0_grp, uart1_grp, + uart2_grp, uart3_grp, uart4_grp, uart5_grp, uart6_grp, + uart7_grp, uart8_grp, uart9_grp, uart10_grp, uart11_grp, + uart12_grp, uart13_grp, uart14_grp, uart15_grp, gpio0_grp, + gpio1_grp, gpio2_grp, gpio3_grp, gpio4_grp, gpio5_grp, + gpio6_grp, gpio7_grp, gpio8_grp, gpio9_grp, gpio10_grp, + gpio11_grp, gpio12_grp, gpio13_grp, gpio14_grp, gpio15_grp, + gpio16_grp, gpio17_grp, gpio18_grp, gpio19_grp, gpio20_grp, + gpio21_grp, gpio22_grp, gpio23_grp, gpio24_grp, gpio25_grp, + gpio26_grp, gpio27_grp, gpio28_grp, gpio29_grp, gpio30_grp, + gpio31_grp, gpio32_grp, gpio33_grp, gpio34_grp, gpio35_grp, + gpio36_grp, gpio37_grp, gpio38_grp, gpio39_grp, gpio40_grp, + gpio41_grp, gpio42_grp, gpio43_grp, gpio44_grp, gpio45_grp, + gpio46_grp, gpio47_grp, gpio48_grp, gpio49_grp, gpio50_grp, + gpio51_grp, gpio52_grp, gpio53_grp, gpio54_grp, gpio55_grp, + gpio56_grp, gpio57_grp, gpio58_grp, gpio59_grp, gpio60_grp, + gpio61_grp, gpio62_grp, gpio63_grp, gpio64_grp, gpio65_grp, + gpio66_grp, gpio67_grp, eth1_grp, i2s0_grp, i2s0_mclkin_grp, + i2s1_grp, i2s1_mclkin_grp, spi0_grp + ] + + function: + items: + enum: [ + nand, spi, emmc, sdio, eth0, pwm0, pwm1, pwm2, pwm3, pwm4, + pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11, pwm12, pwm13, + pwm14, pwm15, pwm16, pwm17, pwm18, pwm19, pwm20, pwm21, pwm22, + pwm23, pwm24, pwm25, pwm26, pwm27, pwm28, pwm29, pwm30, pwm31, + pwm32, pwm33, pwm34, pwm35, pwm36, i2c0, i2c1, i2c2, i2c3, + i2c4, uart0, uart1, uart2, uart3, uart4, uart5, uart6, uart7, + uart8, uart9, uart10, uart11, uart12, uart13, uart14, uart15, + gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, gpio8, + gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, gpio15, gpio16, + gpio17, gpio18, gpio19, gpio20, gpio21, gpio22, gpio23, + gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30, + gpio31, gpio32, gpio33, gpio34, gpio35, gpio36, gpio37, + gpio38, gpio39, gpio40, gpio41, gpio42, gpio43, gpio44, + gpio45, gpio46, gpio47, gpio48, gpio49, gpio50, gpio51, + gpio52, gpio53, gpio54, gpio55, gpio56, gpio57, gpio58, + gpio59, gpio60, gpio61, gpio62, gpio63, gpio64, gpio65, + gpio66, gpio67, eth1, i2s0, i2s0_mclkin, i2s1, i2s1_mclkin, + spi0 + ] + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + input-schmitt-enable: true + input-schmitt-disable: true + + slew-rate: + description: > + Sets slew rate. Valid values: 0 = Slow, 1 = Fast. + enum: [0, 1] + + drive-strength: + enum: [4, 8, 12, 16, 20, 24, 28, 32] + + oneOf: + - required: + - pins + - required: + - groups + + required: + - function + +required: + - compatible + - reg + +examples: + - | + pinctrl@400 { + compatible = "bitmain,bm1880-pinctrl"; + reg = <0x400 0x120>; + + uart0-default { + pinmux { + groups = "uart0_grp"; + function = "uart0"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt deleted file mode 100644 index 40e0a9a19525..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt +++ /dev/null @@ -1,102 +0,0 @@ -Broadcom Northstar2 IOMUX Controller - -The Northstar2 IOMUX controller supports group based mux configuration. There -are some individual pins that support modifying the pinconf parameters. - -Required properties: - -- compatible: - Must be "brcm,ns2-pinmux" - -- reg: - Define the base and range of the I/O address space that contains the - Northstar2 IOMUX and pin configuration registers. - -Properties in sub nodes: - -- function: - The mux function to select - -- groups: - The list of groups to select with a given function - -- pins: - List of pin names to change configuration - -The generic properties bias-disable, bias-pull-down, bias-pull-up, -drive-strength, slew-rate, input-enable, input-disable are supported -for some individual pins listed at the end. - -For more details, refer to -Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - -For example: - - pinctrl: pinctrl@6501d130 { - compatible = "brcm,ns2-pinmux"; - reg = <0x6501d130 0x08>, - <0x660a0028 0x04>, - <0x660009b0 0x40>; - - pinctrl-names = "default"; - pinctrl-0 = <&nand_sel>, <&uart3_rx>, <&sdio0_d4>; - - /* Select nand function */ - nand_sel: nand_sel { - function = "nand"; - groups = "nand_grp"; - }; - - /* Pull up the uart3 rx pin */ - uart3_rx: uart3_rx { - pins = "uart3_sin"; - bias-pull-up; - }; - - /* Set the drive strength of sdio d4 pin */ - sdio0_d4: sdio0_d4 { - pins = "sdio0_data4"; - drive-strength = <8>; - }; - }; - -List of supported functions and groups in Northstar2: - -"nand": "nand_grp" - -"nor": "nor_data_grp", "nor_adv_grp", "nor_addr_0_3_grp", "nor_addr_4_5_grp", - "nor_addr_6_7_grp", "nor_addr_8_9_grp", "nor_addr_10_11_grp", - "nor_addr_12_15_grp" - -"gpio": "gpio_0_1_grp", "gpio_2_5_grp", "gpio_6_7_grp", "gpio_8_9_grp", - "gpio_10_11_grp", "gpio_12_13_grp", "gpio_14_17_grp", "gpio_18_19_grp", - "gpio_20_21_grp", "gpio_22_23_grp", "gpio_24_25_grp", "gpio_26_27_grp", - "gpio_28_29_grp", "gpio_30_31_grp" - -"pcie": "pcie_ab1_clk_wak_grp", "pcie_a3_clk_wak_grp", "pcie_b3_clk_wak_grp", - "pcie_b2_clk_wak_grp", "pcie_a2_clk_wak_grp" - -"uart0": "uart0_modem_grp", "uart0_rts_cts_grp", "uart0_in_out_grp" - -"uart1": "uart1_ext_clk_grp", "uart1_dcd_dsr_grp", "uart1_ri_dtr_grp", - "uart1_rts_cts_grp", "uart1_in_out_grp" - -"uart2": "uart2_rts_cts_grp" - -"pwm": "pwm_0_grp", "pwm_1_grp", "pwm_2_grp", "pwm_3_grp" - - -List of pins that support pinconf parameters: - -"qspi_wp", "qspi_hold", "qspi_cs", "qspi_sck", "uart3_sin", "uart3_sout", -"qspi_mosi", "qspi_miso", "spi0_fss", "spi0_rxd", "spi0_txd", "spi0_sck", -"spi1_fss", "spi1_rxd", "spi1_txd", "spi1_sck", "sdio0_data7", -"sdio0_emmc_rst", "sdio0_led_on", "sdio0_wp", "sdio0_data3", "sdio0_data4", -"sdio0_data5", "sdio0_data6", "sdio0_cmd", "sdio0_data0", "sdio0_data1", -"sdio0_data2", "sdio1_led_on", "sdio1_wp", "sdio0_cd_l", "sdio0_clk", -"sdio1_data5", "sdio1_data6", "sdio1_data7", "sdio1_emmc_rst", "sdio1_data1", -"sdio1_data2", "sdio1_data3", "sdio1_data4", "sdio1_cd_l", "sdio1_clk", -"sdio1_cmd", "sdio1_data0", "ext_mdio_0", "ext_mdc_0", "usb3_p1_vbus_ppc", -"usb3_p1_overcurrent", "usb3_p0_vbus_ppc", "usb3_p0_overcurrent", -"usb2_presence_indication", "usb2_vbus_present", "usb2_vbus_ppc", -"usb2_overcurrent", "sata_led1", "sata_led0" diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.yaml new file mode 100644 index 000000000000..1de23c06fa49 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,ns2-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Northstar2 IOMUX Controller + +maintainers: + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> + +properties: + compatible: + const: brcm,ns2-pinmux + + reg: + maxItems: 3 + +additionalProperties: + description: Pin group node properties + type: object + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml# + - $ref: /schemas/pinctrl/pinmux-node.yaml# + additionalProperties: false + + properties: + function: + description: The mux function to select + $ref: /schemas/types.yaml#/definitions/string + + groups: + items: + enum: [ + nand_grp, nor_data_grp, nor_adv_grp, nor_addr_0_3_grp, + nor_addr_4_5_grp, nor_addr_6_7_grp, nor_addr_8_9_grp, + nor_addr_10_11_grp, nor_addr_12_15_grp, gpio_0_1_grp, gpio_2_5_grp, + gpio_6_7_grp, gpio_8_9_grp, gpio_10_11_grp, gpio_12_13_grp, + gpio_14_17_grp, gpio_18_19_grp, gpio_20_21_grp, gpio_22_23_grp, + gpio_24_25_grp, gpio_26_27_grp, gpio_28_29_grp, gpio_30_31_grp, + pcie_ab1_clk_wak_grp, pcie_a3_clk_wak_grp, pcie_b3_clk_wak_grp, + pcie_b2_clk_wak_grp, pcie_a2_clk_wak_grp, uart0_modem_grp, + uart0_rts_cts_grp, uart0_in_out_grp, uart1_ext_clk_grp, + uart1_dcd_dsr_grp, uart1_ri_dtr_grp, uart1_rts_cts_grp, + uart1_in_out_grp, uart2_rts_cts_grp, pwm_0_grp, pwm_1_grp, pwm_2_grp, + pwm_3_grp + ] + + pins: + items: + enum: [ + qspi_wp, qspi_hold, qspi_cs, qspi_sck, uart3_sin, uart3_sout, + qspi_mosi, qspi_miso, spi0_fss, spi0_rxd, spi0_txd, spi0_sck, + spi1_fss, spi1_rxd, spi1_txd, spi1_sck, sdio0_data7, sdio0_emmc_rst, + sdio0_led_on, sdio0_wp, sdio0_data3, sdio0_data4, sdio0_data5, + sdio0_data6, sdio0_cmd, sdio0_data0, sdio0_data1, sdio0_data2, + sdio1_led_on, sdio1_wp, sdio0_cd_l, sdio0_clk, sdio1_data5, + sdio1_data6, sdio1_data7, sdio1_emmc_rst, sdio1_data1, sdio1_data2, + sdio1_data3, sdio1_data4, sdio1_cd_l, sdio1_clk, sdio1_cmd, + sdio1_data0, ext_mdio_0, ext_mdc_0, usb3_p1_vbus_ppc, + usb3_p1_overcurrent, usb3_p0_vbus_ppc, usb3_p0_overcurrent, + usb2_presence_indication, usb2_vbus_present, usb2_vbus_ppc, + usb2_overcurrent, sata_led1, sata_led0 + ] + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + slew-rate: true + input-enable: true + input-disable: true + + oneOf: + - required: + - groups + - function + - required: + - pins + +required: + - compatible + - reg + +examples: + - | + pinctrl@6501d130 { + compatible = "brcm,ns2-pinmux"; + reg = <0x6501d130 0x08>, + <0x660a0028 0x04>, + <0x660009b0 0x40>; + + /* Select nand function */ + nand-sel { + function = "nand"; + groups = "nand_grp"; + }; + + /* Pull up the uart3 rx pin */ + uart3-rx { + pins = "uart3_sin"; + bias-pull-up; + }; + + /* Set the drive strength of sdio d4 pin */ + sdio0-d4 { + pins = "sdio0_data4"; + drive-strength = <8>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/cix,sky1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/cix,sky1-pinctrl.yaml new file mode 100644 index 000000000000..8ed53496c386 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/cix,sky1-pinctrl.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/cix,sky1-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cix Sky1 Soc Pin Controller + +maintainers: + - Gary Yang <gary.yang@cixtech.com> + +description: + The pin-controller is used to control Soc pins. There are two pin-controllers + on Cix Sky1 platform. one is used under S0 state, the other one is used under + S0 and S5 state. + +properties: + compatible: + enum: + - cix,sky1-pinctrl + - cix,sky1-pinctrl-s5 + + reg: + items: + - description: gpio base + +patternProperties: + '-cfg$': + type: object + additionalProperties: false + + description: + A pinctrl node should contain at least one subnode representing the + pinctrl groups available on the machine. + + patternProperties: + 'pins$': + type: object + additionalProperties: false + + description: + Each subnode will list the pins it needs, and how they should + be configured, with regard to muxer configuration, bias pull, + and drive strength. + + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + properties: + pinmux: + description: + Values are constructed from pin number and mux setting, pin + number is left shifted by 8 bits, then ORed with mux setting + + bias-disable: true + + bias-pull-up: true + + bias-pull-down: true + + drive-strength: + description: + typical current when output high level. + enum: [ 2, 3, 5, 6, 8, 9, 11, 12, 13, 14, 17, 18, 20, 21, 23, + 24 ] + + required: + - pinmux + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #define CIX_PAD_GPIO012_FUNC_GPIO012 (11 << 8 | 0x0) + pinctrl@4170000 { + compatible = "cix,sky1-pinctrl"; + reg = <0x4170000 0x1000>; + + wifi_vbat_gpio: wifi-vbat-gpio-cfg { + pins { + pinmux = <CIX_PAD_GPIO012_FUNC_GPIO012>; + bias-pull-up; + drive-strength = <8>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt deleted file mode 100644 index ecec514b3155..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt +++ /dev/null @@ -1,195 +0,0 @@ -* Marvell Armada 37xx SoC pin and gpio controller - -Each Armada 37xx SoC come with two pin and gpio controller one for the -south bridge and the other for the north bridge. - -Inside this set of register the gpio latch allows exposing some -configuration of the SoC and especially the clock frequency of the -xtal. Hence, this node is a represent as syscon allowing sharing the -register between multiple hardware block. - -GPIO and pin controller: ------------------------- - -Main node: - -Refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning -of the phrase "pin configuration node". - -Required properties for pinctrl driver: - -- compatible: "marvell,armada3710-sb-pinctrl", "syscon, "simple-mfd" - for the south bridge - "marvell,armada3710-nb-pinctrl", "syscon, "simple-mfd" - for the north bridge -- reg: The first set of register are for pinctrl/gpio and the second - set for the interrupt controller -- interrupts: list of the interrupt use by the gpio - -Available groups and functions for the North bridge: - -group: jtag - - pins 20-24 - - functions jtag, gpio - -group sdio0 - - pins 8-10 - - functions sdio, gpio - -group emmc_nb - - pins 27-35 - - functions emmc, gpio - -group pwm0 - - pin 11 (GPIO1-11) - - functions pwm, led, gpio - -group pwm1 - - pin 12 - - functions pwm, led, gpio - -group pwm2 - - pin 13 - - functions pwm, led, gpio - -group pwm3 - - pin 14 - - functions pwm, led, gpio - -group pmic1 - - pin 7 - - functions pmic, gpio - -group pmic0 - - pin 6 - - functions pmic, gpio - -group i2c2 - - pins 2-3 - - functions i2c, gpio - -group i2c1 - - pins 0-1 - - functions i2c, gpio - -group spi_cs1 - - pin 17 - - functions spi, gpio - -group spi_cs2 - - pin 18 - - functions spi, gpio - -group spi_cs3 - - pin 19 - - functions spi, gpio - -group onewire - - pin 4 - - functions onewire, gpio - -group uart1 - - pins 25-26 - - functions uart, gpio - -group spi_quad - - pins 15-16 - - functions spi, gpio - -group uart2 - - pins 9-10 and 18-19 - - functions uart, gpio - -Available groups and functions for the South bridge: - -group usb32_drvvbus0 - - pin 36 - - functions drvbus, gpio - -group usb2_drvvbus1 - - pin 37 - - functions drvbus, gpio - -group sdio_sb - - pins 60-65 - - functions sdio, gpio - -group rgmii - - pins 42-53 - - functions mii, gpio - -group pcie1 - - pins 39 - - functions pcie, gpio - -group pcie1_clkreq - - pins 40 - - functions pcie, gpio - -group pcie1_wakeup - - pins 41 - - functions pcie, gpio - -group smi - - pins 54-55 - - functions smi, gpio - -group ptp - - pins 56 - - functions ptp, gpio - -group ptp_clk - - pin 57 - - functions ptp, mii - -group ptp_trig - - pin 58 - - functions ptp, mii - -group mii_col - - pin 59 - - functions mii, mii_err - -GPIO subnode: - -Please refer to gpio.txt in this directory for details of gpio-ranges property -and the common GPIO bindings used by client devices. - -Required properties for gpio driver under the gpio subnode: -- interrupts: List of interrupt specifier for the controllers interrupt. -- gpio-controller: Marks the device node as a gpio controller. -- #gpio-cells: Should be 2. The first cell is the GPIO number and the - second cell specifies GPIO flags, as defined in - <dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH and - GPIO_ACTIVE_LOW flags are supported. -- gpio-ranges: Range of pins managed by the GPIO controller. - -Xtal Clock bindings for Marvell Armada 37xx SoCs ------------------------------------------------- - -see Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt - - -Example: -pinctrl_sb: pinctrl-sb@18800 { - compatible = "marvell,armada3710-sb-pinctrl", "syscon", "simple-mfd"; - reg = <0x18800 0x100>, <0x18C00 0x20>; - gpio { - #gpio-cells = <2>; - gpio-ranges = <&pinctrl_sb 0 0 29>; - gpio-controller; - interrupts = - <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; - }; - - rgmii_pins: mii-pins { - groups = "rgmii"; - function = "mii"; - }; - -}; diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada3710-xb-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/marvell,armada3710-xb-pinctrl.yaml new file mode 100644 index 000000000000..51bad2e8d6f1 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada3710-xb-pinctrl.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/marvell,armada3710-xb-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada 37xx SoC pin and gpio controller + +maintainers: + - Gregory CLEMENT <gregory.clement@bootlin.com> + - Marek Behún <kabel@kernel.org> + - Miquel Raynal <miquel.raynal@bootlin.com> + +description: > + Each Armada 37xx SoC come with two pin and gpio controller one for the south + bridge and the other for the north bridge. + + Inside this set of register the gpio latch allows exposing some configuration + of the SoC and especially the clock frequency of the xtal. Hence, this node is + a represent as syscon allowing sharing the register between multiple hardware + block. + +properties: + compatible: + items: + - enum: + - marvell,armada3710-sb-pinctrl + - marvell,armada3710-nb-pinctrl + - const: syscon + - const: simple-mfd + + reg: + items: + - description: pinctrl and GPIO controller registers + - description: interrupt controller registers + + gpio: + description: GPIO controller subnode + type: object + additionalProperties: false + + properties: + '#gpio-cells': + const: 2 + + gpio-controller: true + + gpio-ranges: + description: Range of pins managed by the GPIO controller + + '#interrupt-cells': + const: 2 + + interrupt-controller: true + + interrupts: + description: List of interrupt specifiers for the GPIO controller + + required: + - '#gpio-cells' + - gpio-ranges + - gpio-controller + - '#interrupt-cells' + - interrupt-controller + - interrupts + + xtal-clk: + type: object + additionalProperties: false + + properties: + compatible: + const: marvell,armada-3700-xtal-clock + + '#clock-cells': + const: 0 + + clock-output-names: true + +patternProperties: + '-pins$': + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + groups: + enum: [ emmc_nb, i2c1, i2c2, jtag, mii_col, onewire, pcie1, + pcie1_clkreq, pcie1_wakeup, pmic0, pmic1, ptp, ptp_clk, + ptp_trig, pwm0, pwm1, pwm2, pwm3, rgmii, sdio0, sdio_sb, smi, + spi_cs1, spi_cs2, spi_cs3, spi_quad, uart1, uart2, + usb2_drvvbus1, usb32_drvvbus ] + + function: + enum: [ drvbus, emmc, gpio, i2c, jtag, led, mii, mii_err, onewire, + pcie, pmic, ptp, pwm, sdio, smi, spi, uart ] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pinctrl_sb: pinctrl@18800 { + compatible = "marvell,armada3710-sb-pinctrl", "syscon", "simple-mfd"; + reg = <0x18800 0x100>, <0x18C00 0x20>; + + gpio { + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_sb 0 0 29>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts = + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,berlin2-soc-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/marvell,berlin2-soc-pinctrl.yaml new file mode 100644 index 000000000000..6ace3bf5433b --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,berlin2-soc-pinctrl.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/marvell,berlin2-soc-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Berlin pin-controller driver + +maintainers: + - Antoine Tenart <atenart@kernel.org> + - Jisheng Zhang <jszhang@kernel.org> + +description: > + Pin control registers are part of both chip controller and system controller + register sets. Pin controller nodes should be a sub-node of either the chip + controller or system controller node. The pins controlled are organized in + groups, so no actual pin information is needed. + + A pin-controller node should contain subnodes representing the pin group + configurations, one per function. Each subnode has the group name and the + muxing function used. + + Be aware the Marvell Berlin datasheets use the keyword 'mode' for what is + called a 'function' in the pin-controller subsystem. + +properties: + compatible: + items: + - enum: + - marvell,berlin2-soc-pinctrl + - marvell,berlin2-system-pinctrl + - marvell,berlin2cd-soc-pinctrl + - marvell,berlin2cd-system-pinctrl + - marvell,berlin2q-soc-pinctrl + - marvell,berlin2q-system-pinctrl + - marvell,berlin4ct-avio-pinctrl + - marvell,berlin4ct-soc-pinctrl + - marvell,berlin4ct-system-pinctrl + - syna,as370-soc-pinctrl + + reg: + maxItems: 1 + +additionalProperties: + description: Pin group configuration subnodes. + type: object + $ref: /schemas/pinctrl/pinmux-node.yaml# + additionalProperties: false + + properties: + groups: + description: List of pin group names. + $ref: /schemas/types.yaml#/definitions/string-array + + function: + description: Function used to mux the group. + $ref: /schemas/types.yaml#/definitions/string + + required: + - groups + - function + +allOf: + - if: + properties: + compatible: + contains: + enum: + - marvell,berlin4ct-avio-pinctrl + - marvell,berlin4ct-soc-pinctrl + - marvell,berlin4ct-system-pinctrl + - syna,as370-soc-pinctrl + then: + required: + - reg + +examples: + - | + pinctrl { + compatible = "marvell,berlin2q-system-pinctrl"; + + uart0-pmux { + groups = "GSM12"; + function = "uart0"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6878-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6878-pinctrl.yaml new file mode 100644 index 000000000000..8d44194a7938 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6878-pinctrl.yaml @@ -0,0 +1,211 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6878-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6878 Pin Controller + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + - Igor Belwon <igor.belwon@mentallysanemainliners.org> + +description: + The MediaTek MT6878 Pin controller is used to control SoC pins. + +properties: + compatible: + const: mediatek,mt6878-pinctrl + + reg: + items: + - description: pin controller base + - description: bl group IO + - description: bm group IO + - description: br group IO + - description: bl1 group IO + - description: br1 group IO + - description: lm group IO + - description: lt group IO + - description: rm group IO + - description: rt group IO + - description: EINT controller E block + - description: EINT controller S block + - description: EINT controller W block + - description: EINT controller C block + + reg-names: + items: + - const: base + - const: bl + - const: bm + - const: br + - const: bl1 + - const: br1 + - const: lm + - const: lt + - const: rm + - const: rt + - const: eint-e + - const: eint-s + - const: eint-w + - const: eint-c + + gpio-controller: true + + '#gpio-cells': + description: + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. + const: 2 + + gpio-ranges: + maxItems: 1 + + gpio-line-names: + maxItems: 216 + + interrupts: + description: The interrupt outputs to sysirq + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + +# PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + additionalProperties: false + + patternProperties: + '^pins': + type: object + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml + - $ref: /schemas/pinctrl/pinmux-node.yaml + description: + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and input + schmitt. + + properties: + pinmux: + description: + Integer array, represents gpio pin number and mux setting. + Supported pin number and mux are defined as macros in + arch/arm64/boot/dts/mediatek/mt8196-pinfunc.h for this SoC. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + drive-strength-microamp: + enum: [125, 250, 500, 1000] + + bias-pull-down: + oneOf: + - type: boolean + - enum: [75000, 5000] + description: Pull down RSEL type resistance values (in ohms) + description: + For normal pull down type there is no need to specify a resistance + value, hence this can be specified as a boolean property. + For RSEL pull down type a resistance value (in ohms) can be added. + + bias-pull-up: + oneOf: + - type: boolean + - enum: [10000, 5000, 4000, 3000] + description: Pull up RSEL type resistance values (in ohms) + description: + For normal pull up type there is no need to specify a resistance + value, hence this can be specified as a boolean property. + For RSEL pull up type a resistance value (in ohms) can be added. + + bias-disable: true + + output-high: true + + output-low: true + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + required: + - pinmux + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/mt65xx.h> + #define PINMUX_GPIO0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0) + #define PINMUX_GPIO99__FUNC_SCL0 (MTK_PIN_NO(99) | 1) + #define PINMUX_GPIO100__FUNC_SDA0 (MTK_PIN_NO(100) | 1) + + pio: pinctrl@10005000 { + compatible = "mediatek,mt6878-pinctrl"; + reg = <0x10005000 0x1000>, + <0x11d10000 0x1000>, + <0x11d30000 0x1000>, + <0x11d40000 0x1000>, + <0x11d50000 0x1000>, + <0x11d60000 0x1000>, + <0x11e20000 0x1000>, + <0x11e30000 0x1000>, + <0x11eb0000 0x1000>, + <0x11ec0000 0x1000>, + <0x11ce0000 0x1000>, + <0x11de0000 0x1000>, + <0x11e60000 0x1000>, + <0x1c01e000 0x1000>; + reg-names = "base", "bl", "bm", "br", "bl1", "br1", + "lm", "lt", "rm", "rt", "eint-e", "eint-s", + "eint-w", "eint-c"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 220>; + interrupt-controller; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH 0>; + #interrupt-cells = <2>; + + gpio-pins { + pins { + pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; + bias-pull-up = <4000>; + drive-strength = <6>; + }; + }; + + i2c0-pins { + pins-bus { + pinmux = <PINMUX_GPIO99__FUNC_SCL0>, + <PINMUX_GPIO100__FUNC_SDA0>; + bias-pull-down = <75000>; + drive-strength-microamp = <1000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7988-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7988-pinctrl.yaml index 26dfe7e7735a..1f31b520cb43 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7988-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7988-pinctrl.yaml @@ -61,6 +61,11 @@ required: - "#gpio-cells" patternProperties: + "-hog(-[0-9]+)?$": + type: object + required: + - gpio-hog + '-pins$': type: object additionalProperties: false diff --git a/Documentation/devicetree/bindings/pinctrl/microchip,mpfs-pinctrl-iomux0.yaml b/Documentation/devicetree/bindings/pinctrl/microchip,mpfs-pinctrl-iomux0.yaml new file mode 100644 index 000000000000..3c98eb35fb82 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/microchip,mpfs-pinctrl-iomux0.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/microchip,mpfs-pinctrl-iomux0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PolarFire SoC iomux0 + +maintainers: + - Conor Dooley <conor.dooley@microchip.com> + +description: + iomux0 is responsible for routing some functions to either the FPGA fabric, + or to MSSIOs. It only performs muxing, and has no IO configuration role, as + fabric IOs are configured separately and just routing a function to MSSIOs is + not sufficient for it to actually get mapped to an MSSIO, just makes it + possible. + +properties: + compatible: + oneOf: + - const: microchip,mpfs-pinctrl-iomux0 + - items: + - const: microchip,pic64gx-pinctrl-iomux0 + - const: microchip,mpfs-pinctrl-iomux0 + + reg: + maxItems: 1 + + pinctrl-use-default: true + +patternProperties: + '^mux-': + type: object + $ref: pinmux-node.yaml + additionalProperties: false + + properties: + function: + description: + A string containing the name of the function to mux to the group. + enum: [ spi0, spi1, i2c0, i2c1, can0, can1, qspi, uart0, uart1, uart2, + uart3, uart4, mdio0, mdio1 ] + + groups: + description: + An array of strings. Each string contains the name of a group. + items: + enum: [ spi0_fabric, spi0_mssio, spi1_fabric, spi1_mssio, i2c0_fabric, + i2c0_mssio, i2c1_fabric, i2c1_mssio, can0_fabric, can0_mssio, + can1_fabric, can1_mssio, qspi_fabric, qspi_mssio, + uart0_fabric, uart0_mssio, uart1_fabric, uart1_mssio, + uart2_fabric, uart2_mssio, uart3_fabric, uart3_mssio, + uart4_fabric, uart4_mssio, mdio0_fabric, mdio0_mssio, + mdio1_fabric, mdio1_mssio ] + + required: + - function + - groups + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + soc { + #size-cells = <1>; + #address-cells = <1>; + + pinctrl@200 { + compatible = "microchip,mpfs-pinctrl-iomux0"; + reg = <0x200 0x4>; + + mux-spi0-fabric { + function = "spi0"; + groups = "spi0_fabric"; + }; + + mux-spi1-mssio { + function = "spi1"; + groups = "spi1_mssio"; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/pinctrl/microchip,pic64gx-pinctrl-gpio2.yaml b/Documentation/devicetree/bindings/pinctrl/microchip,pic64gx-pinctrl-gpio2.yaml new file mode 100644 index 000000000000..e3792679de58 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/microchip,pic64gx-pinctrl-gpio2.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/microchip,pic64gx-pinctrl-gpio2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PIC64GX GPIO2 Mux + +maintainers: + - Conor Dooley <conor.dooley@microchip.com> + +description: + The "GPIO2 Mux" determines whether GPIO2 or select other functions are + available on package pins on PIC64GX. Some of these functions must be + mapped to this mux via iomux0 for settings here to have any impact. + +properties: + compatible: + const: microchip,pic64gx-pinctrl-gpio2 + + reg: + maxItems: 1 + + pinctrl-use-default: true + +patternProperties: + '^mux-': + type: object + $ref: pinmux-node.yaml + additionalProperties: false + + properties: + function: + description: + A string containing the name of the function to mux to the group. + enum: [ mdio0, mdio1, spi0, can0, pcie, qspi, uart3, uart4, can1, uart2, gpio ] + + groups: + description: + An array of strings. Each string contains the name of a group. + items: + enum: [ mdio0, mdio1, spi0, can0, pcie, qspi, uart3, uart4, can1, uart2, + gpio_mdio0, gpio_mdio1, gpio_spi0, gpio_can0, gpio_pcie, + gpio_qspi, gpio_uart3, gpio_uart4, gpio_can1, gpio_uart2 ] + + required: + - function + - groups + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@41000000 { + compatible = "microchip,pic64gx-pinctrl-gpio2"; + reg = <0x41000000 0x4>; + pinctrl-use-default; + pinctrl-names = "default"; + pinctrl-0 = <&mdio0_gpio2>, <&mdio1_gpio2>, <&spi0_gpio2>, <&qspi_gpio2>, + <&uart3_gpio2>, <&uart4_gpio2>, <&can1_gpio2>, <&can0_gpio2>, + <&uart2_gpio2>; + + mux-gpio2 { + function = "gpio"; + groups = "gpio_mdio1", "gpio_spi0", "gpio_can0", "gpio_pcie", + "gpio_qspi", "gpio_uart3", "gpio_uart4", "gpio_can1"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml index cbfcf215e571..d1bc389e0a6d 100644 --- a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml @@ -153,4 +153,21 @@ properties: pin. Typically indicates how many double-inverters are used to delay the signal. + skew-delay-input-ps: + description: + this affects the expected clock skew in ps on an input pin. + + skew-delay-output-ps: + description: + this affects the expected delay in ps before latching a value to + an output pin. + +if: + required: + - skew-delay +then: + properties: + skew-delay-input-ps: false + skew-delay-output-ps: false + additionalProperties: true diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml index f83dbf32ad18..9135788cf62e 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml @@ -24,6 +24,7 @@ properties: - items: - enum: - ti,am437-padconf + - ti,am62l-padconf - ti,am654-padconf - ti,dra7-padconf - ti,omap2420-padconf diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,kaanapali-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,kaanapali-tlmm.yaml new file mode 100644 index 000000000000..53534a07a1f0 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,kaanapali-tlmm.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,kaanapali-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. Kaanapali TLMM block + +maintainers: + - Jingyi Wang <jingyi.wang@oss.qualcomm.com> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm Kaanapali SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,kaanapali-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 109 + + gpio-line-names: + maxItems: 217 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-kaanapali-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-kaanapali-tlmm-state" + additionalProperties: false + +$defs: + qcom-kaanapali-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9]|21[0-6])$" + - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ gpio, aoss_cti, atest_char, atest_usb, audio_ext_mclk0, + audio_ext_mclk1, audio_ref_clk, cam_asc_mclk2, cam_asc_mclk4, + cam_mclk, cci_async_in, cci_i2c_scl, cci_i2c_sda, cci_timer, + cmu_rng, coex_uart1_rx, coex_uart1_tx, coex_uart2_rx, + coex_uart2_tx, dbg_out_clk, ddr_bist_complete, ddr_bist_fail, + ddr_bist_start, ddr_bist_stop, ddr_pxi0, ddr_pxi1, ddr_pxi2, + ddr_pxi3, dp_hot, egpio, gcc_gp1, gcc_gp2, gcc_gp3, gnss_adc0, + gnss_adc1, i2chub0_se0, i2chub0_se1, i2chub0_se2, i2chub0_se3, + i2chub0_se4, i2s0_data0, i2s0_data1, i2s0_sck, i2s0_ws, + i2s1_data0, i2s1_data1, i2s1_sck, i2s1_ws, ibi_i3c, jitter_bist, + mdp_esync0_out, mdp_esync1_out, mdp_vsync, mdp_vsync0_out, + mdp_vsync1_out, mdp_vsync2_out, mdp_vsync3_out, mdp_vsync5_out, + mdp_vsync_e, nav_gpio0, nav_gpio1, nav_gpio2, nav_gpio3, + pcie0_clk_req_n, phase_flag, pll_bist_sync, pll_clk_aux, + prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, + qdss_gpio_traceclk, qdss_gpio_tracectl, qdss_gpio_tracedata, + qlink_big_enable, qlink_big_request, qlink_little_enable, + qlink_little_request, qlink_wmss, qspi0, qspi1, qspi2, qspi3, + qspi_clk, qspi_cs, qup1_se0, qup1_se1, qup1_se2, qup1_se3, + qup1_se4, qup1_se5, qup1_se6, qup1_se7, qup2_se0, qup2_se1, + qup2_se2, qup2_se3, qup2_se4, qup3_se0, qup3_se1, qup3_se2, + qup3_se3, qup3_se4, qup3_se5, qup4_se0, qup4_se1, qup4_se2, + qup4_se3, qup4_se4, sd_write_protect, sdc40, sdc41, sdc42, sdc43, + sdc4_clk, sdc4_cmd, sys_throttle, tb_trig_sdc2, tb_trig_sdc4, + tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3, tsense_pwm1, + tsense_pwm2, tsense_pwm3, tsense_pwm4, tsense_pwm5, tsense_pwm6, + tsense_pwm7, uim0_clk, uim0_data, uim0_present, uim0_reset, uim1_clk, + uim1_data, uim1_present, uim1_reset, usb0_hs, usb_phy, vfr_0, vfr_1, + vsense_trigger_mirnat, wcn_sw, wcn_sw_ctrl ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@f100000 { + compatible = "qcom,kaanapali-tlmm"; + reg = <0x0f100000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 218>; + interrupt-controller; + #interrupt-cells = <2>; + + qup-uart7-state { + pins = "gpio62", "gpio63"; + function = "qup1_se7"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml index 435f0dc7a82e..7301318094c7 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml @@ -107,12 +107,12 @@ examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> - msmgpio: pinctrl@800000 { + tlmm: pinctrl@800000 { compatible = "qcom,msm8960-pinctrl"; reg = <0x800000 0x4000>; #gpio-cells = <2>; gpio-controller; - gpio-ranges = <&msmgpio 0 0 152>; + gpio-ranges = <&tlmm 0 0 152>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml index 6632bcd037ba..386c31e9c52b 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml @@ -59,7 +59,11 @@ properties: - qcom,pmc8180-gpio - qcom,pmc8180c-gpio - qcom,pmc8380-gpio + - qcom,pmcx0102-gpio - qcom,pmd8028-gpio + - qcom,pmh0101-gpio + - qcom,pmh0104-gpio + - qcom,pmh0110-gpio - qcom,pmi632-gpio - qcom,pmi8950-gpio - qcom,pmi8994-gpio @@ -68,6 +72,7 @@ properties: - qcom,pmiv0104-gpio - qcom,pmk8350-gpio - qcom,pmk8550-gpio + - qcom,pmk8850-gpio - qcom,pmm8155au-gpio - qcom,pmm8654au-gpio - qcom,pmp8074-gpio @@ -191,6 +196,8 @@ allOf: - qcom,pm8950-gpio - qcom,pm8953-gpio - qcom,pmi632-gpio + - qcom,pmh0104-gpio + - qcom,pmk8850-gpio then: properties: gpio-line-names: @@ -303,6 +310,8 @@ allOf: compatible: contains: enum: + - qcom,pmcx0102-gpio + - qcom,pmh0110-gpio - qcom,pmi8998-gpio then: properties: @@ -318,6 +327,7 @@ allOf: compatible: contains: enum: + - qcom,pmh0101-gpio - qcom,pmih0108-gpio then: properties: @@ -481,13 +491,18 @@ $defs: - gpio1-gpio22 for pm8994 - gpio1-gpio26 for pm8998 - gpio1-gpio22 for pma8084 + - gpio1-gpio14 for pmcx0102 - gpio1-gpio4 for pmd8028 + - gpio1-gpio18 for pmh0101 + - gpio1-gpio8 for pmh0104 + - gpio1-gpio14 for pmh0110 - gpio1-gpio8 for pmi632 - gpio1-gpio2 for pmi8950 - gpio1-gpio10 for pmi8994 - gpio1-gpio18 for pmih0108 - gpio1-gpio4 for pmk8350 - gpio1-gpio6 for pmk8550 + - gpio1-gpio8 for pmk8850 - gpio1-gpio10 for pmm8155au - gpio1-gpio12 for pmm8654au - gpio1-gpio12 for pmp8074 (holes on gpio1 and gpio12) diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml index d3e4926034a7..d2a036ead846 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml @@ -16,7 +16,13 @@ description: properties: compatible: - const: qcom,sm6115-lpass-lpi-pinctrl + oneOf: + - enum: + - qcom,sm6115-lpass-lpi-pinctrl + - items: + - enum: + - qcom,qcm2290-lpass-lpi-pinctrl + - const: qcom,sm6115-lpass-lpi-pinctrl reg: items: diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml index 125af766b992..76e607281716 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml @@ -44,6 +44,7 @@ properties: - rockchip,rk3328-pinctrl - rockchip,rk3368-pinctrl - rockchip,rk3399-pinctrl + - rockchip,rk3506-pinctrl - rockchip,rk3528-pinctrl - rockchip,rk3562-pinctrl - rockchip,rk3568-pinctrl diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml index dd11c73a55da..f3c433015b12 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml @@ -41,6 +41,7 @@ properties: - samsung,exynos7870-wakeup-eint - samsung,exynos7885-wakeup-eint - samsung,exynos850-wakeup-eint + - samsung,exynos8890-wakeup-eint - samsung,exynos8895-wakeup-eint - const: samsung,exynos7-wakeup-eint - items: diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml index f1094d65e846..ddc5e2efff21 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml @@ -36,6 +36,7 @@ properties: compatible: enum: - axis,artpec8-pinctrl + - axis,artpec9-pinctrl - google,gs101-pinctrl - samsung,s3c64xx-pinctrl - samsung,s5pv210-pinctrl @@ -52,6 +53,7 @@ properties: - samsung,exynos7870-pinctrl - samsung,exynos7885-pinctrl - samsung,exynos850-pinctrl + - samsung,exynos8890-pinctrl - samsung,exynos8895-pinctrl - samsung,exynos9810-pinctrl - samsung,exynos990-pinctrl @@ -133,7 +135,9 @@ allOf: properties: compatible: contains: - const: google,gs101-pinctrl + enum: + - google,gs101-pinctrl + - samsung,exynos8890-pinctrl then: required: - clocks diff --git a/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt deleted file mode 100644 index 779b8ef0f6e6..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt +++ /dev/null @@ -1,83 +0,0 @@ -* Spreadtrum Pin Controller - -The Spreadtrum pin controller are organized in 3 blocks (types). - -The first block comprises some global control registers, and each -register contains several bit fields with one bit or several bits -to configure for some global common configuration, such as domain -pad driving level, system control select and so on ("domain pad -driving level": One pin can output 3.0v or 1.8v, depending on the -related domain pad driving selection, if the related domain pad -select 3.0v, then the pin can output 3.0v. "system control" is used -to choose one function (like: UART0) for which system, since we -have several systems (AP/CP/CM4) on one SoC.). - -There are too much various configuration that we can not list all -of them, so we can not make every Spreadtrum-special configuration -as one generic configuration, and maybe it will add more strange -global configuration in future. Then we add one "sprd,control" to -set these various global control configuration, and we need use -magic number for this property. - -Moreover we recognise every fields comprising one bit or several -bits in one global control register as one pin, thus we should -record every pin's bit offset, bit width and register offset to -configure this field (pin). - -The second block comprises some common registers which have unified -register definition, and each register described one pin is used -to configure the pin sleep mode, function select and sleep related -configuration. - -Now we have 4 systems for sleep mode on SC9860 SoC: AP system, -PUBCP system, TGLDSP system and AGDSP system. And the pin sleep -related configuration are: -- input-enable -- input-disable -- output-high -- output-low -- bias-pull-up -- bias-pull-down - -In some situation we need set the pin sleep mode and pin sleep related -configuration, to set the pin sleep related configuration automatically -by hardware when the system specified by sleep mode goes into deep -sleep mode. For example, if we set the pin sleep mode as PUBCP_SLEEP -and set the pin sleep related configuration as "input-enable", which -means when PUBCP system goes into deep sleep mode, this pin will be set -input enable automatically. - -Moreover we can not use the "sleep" state, since some systems (like: -PUBCP system) do not run linux kernel OS (only AP system run linux -kernel on SC9860 platform), then we can not select "sleep" state -when the PUBCP system goes into deep sleep mode. Thus we introduce -"sprd,sleep-mode" property to set pin sleep mode. - -The last block comprises some misc registers which also have unified -register definition, and each register described one pin is used to -configure drive strength, pull up/down and so on. Especially for pull -up, we have two kind pull up resistor: 20K and 4.7K. - -Required properties for Spreadtrum pin controller: -- compatible: "sprd,<soc>-pinctrl" - Please refer to each sprd,<soc>-pinctrl.txt binding doc for supported SoCs. -- reg: The register address of pin controller device. -- pins : An array of pin names. - -Optional properties: -- function: Specified the function name. -- drive-strength: Drive strength in mA. -- input-schmitt-disable: Enable schmitt-trigger mode. -- input-schmitt-enable: Disable schmitt-trigger mode. -- bias-disable: Disable pin bias. -- bias-pull-down: Pull down on pin. -- bias-pull-up: Pull up on pin. -- input-enable: Enable pin input. -- input-disable: Enable pin output. -- output-high: Set the pin as an output level high. -- output-low: Set the pin as an output level low. -- sleep-hardware-state: Indicate these configs in this state are sleep related. -- sprd,control: Control values referring to databook for global control pins. -- sprd,sleep-mode: Sleep mode selection. - -Please refer to each sprd,<soc>-pinctrl.txt binding doc for supported values. diff --git a/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt deleted file mode 100644 index 5a628333d52f..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt +++ /dev/null @@ -1,70 +0,0 @@ -* Spreadtrum SC9860 Pin Controller - -Please refer to sprd,pinctrl.txt in this directory for common binding part -and usage. - -Required properties: -- compatible: Must be "sprd,sc9860-pinctrl". -- reg: The register address of pin controller device. -- pins : An array of strings, each string containing the name of a pin. - -Optional properties: -- function: A string containing the name of the function, values must be - one of: "func1", "func2", "func3" and "func4". -- drive-strength: Drive strength in mA. Supported values: 2, 4, 6, 8, 10, - 12, 14, 16, 20, 21, 24, 25, 27, 29, 31 and 33. -- input-schmitt-disable: Enable schmitt-trigger mode. -- input-schmitt-enable: Disable schmitt-trigger mode. -- bias-disable: Disable pin bias. -- bias-pull-down: Pull down on pin. -- bias-pull-up: Pull up on pin. Supported values: 20000 for pull-up resistor - is 20K and 4700 for pull-up resistor is 4.7K. -- input-enable: Enable pin input. -- input-disable: Enable pin output. -- output-high: Set the pin as an output level high. -- output-low: Set the pin as an output level low. -- sleep-hardware-state: Indicate these configs in this state are sleep related. -- sprd,control: Control values referring to databook for global control pins. -- sprd,sleep-mode: Choose the pin sleep mode, and supported values are: - AP_SLEEP, PUBCP_SLEEP, TGLDSP_SLEEP and AGDSP_SLEEP. - -Pin sleep mode definition: -enum pin_sleep_mode { - AP_SLEEP = BIT(0), - PUBCP_SLEEP = BIT(1), - TGLDSP_SLEEP = BIT(2), - AGDSP_SLEEP = BIT(3), -}; - -Example: -pin_controller: pinctrl@402a0000 { - compatible = "sprd,sc9860-pinctrl"; - reg = <0x402a0000 0x10000>; - - grp1: sd0 { - pins = "SC9860_VIO_SD2_IRTE", "SC9860_VIO_SD0_IRTE"; - sprd,control = <0x1>; - }; - - grp2: rfctl_33 { - pins = "SC9860_RFCTL33"; - function = "func2"; - sprd,sleep-mode = <AP_SLEEP | PUBCP_SLEEP>; - grp2_sleep_mode: rfctl_33_sleep { - pins = "SC9860_RFCTL33"; - sleep-hardware-state; - output-low; - } - }; - - grp3: rfctl_misc_20 { - pins = "SC9860_RFCTL20_MISC"; - drive-strength = <10>; - bias-pull-up = <4700>; - grp3_sleep_mode: rfctl_misc_sleep { - pins = "SC9860_RFCTL20_MISC"; - sleep-hardware-state; - bias-pull-up; - } - }; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.yaml new file mode 100644 index 000000000000..59d23eb8aa97 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.yaml @@ -0,0 +1,199 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/sprd,sc9860-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Spreadtrum SC9860 Pin Controller + +maintainers: + - Baolin Wang <baolin.wang@linux.alibaba.com> + +description: > + The Spreadtrum pin controller are organized in 3 blocks (types). + + The first block comprises some global control registers, and each + register contains several bit fields with one bit or several bits + to configure for some global common configuration, such as domain + pad driving level, system control select and so on ("domain pad + driving level": One pin can output 3.0v or 1.8v, depending on the + related domain pad driving selection, if the related domain pad + select 3.0v, then the pin can output 3.0v. "system control" is used + to choose one function (like: UART0) for which system, since we + have several systems (AP/CP/CM4) on one SoC.). + + There are too much various configuration that we can not list all + of them, so we can not make every Spreadtrum-special configuration + as one generic configuration, and maybe it will add more strange + global configuration in future. Then we add one "sprd,control" to + set these various global control configuration, and we need use + magic number for this property. + + Moreover we recognize every fields comprising one bit or several + bits in one global control register as one pin, thus we should + record every pin's bit offset, bit width and register offset to + configure this field (pin). + + The second block comprises some common registers which have unified + register definition, and each register described one pin is used + to configure the pin sleep mode, function select and sleep related + configuration. + + Now we have 4 systems for sleep mode on SC9860 SoC: AP system, + PUBCP system, TGLDSP system and AGDSP system. And the pin sleep + related configuration are: + - input-enable + - input-disable + - output-high + - output-low + - bias-pull-up + - bias-pull-down + + In some situation we need set the pin sleep mode and pin sleep related + configuration, to set the pin sleep related configuration automatically + by hardware when the system specified by sleep mode goes into deep + sleep mode. For example, if we set the pin sleep mode as PUBCP_SLEEP + and set the pin sleep related configuration as "input-enable", which + means when PUBCP system goes into deep sleep mode, this pin will be set + input enable automatically. + + Moreover we can not use the "sleep" state, since some systems (like: + PUBCP system) do not run linux kernel OS (only AP system run linux + kernel on SC9860 platform), then we can not select "sleep" state + when the PUBCP system goes into deep sleep mode. Thus we introduce + "sprd,sleep-mode" property to set pin sleep mode. + + The last block comprises some misc registers which also have unified + register definition, and each register described one pin is used to + configure drive strength, pull up/down and so on. Especially for pull + up, we have two kind pull up resistor: 20K and 4.7K. + +properties: + compatible: + const: sprd,sc9860-pinctrl + + reg: + maxItems: 1 + +additionalProperties: + $ref: '#/$defs/pin-node' + unevaluatedProperties: false + + properties: + function: + description: Function to assign to the pins. + enum: + - func1 + - func2 + - func3 + - func4 + + drive-strength: + description: Drive strength in mA. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 4, 6, 8, 10, 12, 14, 16, 20, 21, 24, 25, 27, 29, 31, 33] + + input-schmitt-disable: true + + input-schmitt-enable: true + + bias-pull-up: + enum: [20000, 4700] + + sprd,sleep-mode: + description: Pin sleep mode selection. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 0x1f + + sprd,control: + description: Control values referring to databook for global control pins. + $ref: /schemas/types.yaml#/definitions/uint32 + + patternProperties: + 'sleep$': + $ref: '#/$defs/pin-node' + unevaluatedProperties: false + + properties: + bias-pull-up: + type: boolean + + sleep-hardware-state: + description: Indicate these configs in sleep related state. + type: boolean + +$defs: + pin-node: + type: object + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml# + - $ref: /schemas/pinctrl/pinmux-node.yaml# + + properties: + pins: + description: Names of pins to configure. + $ref: /schemas/types.yaml#/definitions/string-array + + bias-disable: + description: Disable pin bias. + type: boolean + + bias-pull-down: + description: Pull down on pin. + type: boolean + + bias-pull-up: true + + input-enable: + description: Enable pin input. + type: boolean + + input-disable: + description: Enable pin output. + type: boolean + + output-high: + description: Set the pin as an output level high. + type: boolean + + output-low: + description: Set the pin as an output level low. + type: boolean + +required: + - compatible + - reg + +examples: + - | + pin_controller: pinctrl@402a0000 { + compatible = "sprd,sc9860-pinctrl"; + reg = <0x402a0000 0x10000>; + + grp1: sd0 { + pins = "SC9860_VIO_SD2_IRTE", "SC9860_VIO_SD0_IRTE"; + sprd,control = <0x1>; + }; + + grp2: rfctl_33 { + pins = "SC9860_RFCTL33"; + function = "func2"; + sprd,sleep-mode = <3>; + grp2_sleep_mode: rfctl_33_sleep { + pins = "SC9860_RFCTL33"; + sleep-hardware-state; + output-low; + }; + }; + + grp3: rfctl_misc_20 { + pins = "SC9860_RFCTL20_MISC"; + drive-strength = <10>; + bias-pull-up = <4700>; + grp3_sleep_mode: rfctl_misc_sleep { + pins = "SC9860_RFCTL20_MISC"; + sleep-hardware-state; + bias-pull-up; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index 961161c2ab62..76d956b4a537 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -151,6 +151,8 @@ patternProperties: pinctrl group available on the machine. Each subnode will list the pins it needs, and how they should be configured, with regard to muxer configuration, pullups, drive, output high/low and output speed. + $ref: /schemas/pinctrl/pincfg-node.yaml + properties: pinmux: $ref: /schemas/types.yaml#/definitions/uint32-array @@ -195,26 +197,19 @@ patternProperties: pinmux = <STM32_PINMUX('A', 9, RSVD)>; }; - bias-disable: - type: boolean + bias-disable: true - bias-pull-down: - type: boolean + bias-pull-down: true - bias-pull-up: - type: boolean + bias-pull-up: true - drive-push-pull: - type: boolean + drive-push-pull: true - drive-open-drain: - type: boolean + drive-open-drain: true - output-low: - type: boolean + output-low: true - output-high: - type: boolean + output-high: true slew-rate: description: | @@ -222,15 +217,68 @@ patternProperties: 1: Medium speed 2: Fast speed 3: High speed - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1, 2, 3] + minimum: 0 + maximum: 3 + + skew-delay-input-ps: + description: | + IO synchronization skew rate applied to the input path + enum: [0, 300, 500, 750, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000, 3250] + + skew-delay-output-ps: + description: | + IO synchronization latch delay applied to the output path + enum: [0, 300, 500, 750, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000, 3250] + + st,io-sync: + $ref: /schemas/types.yaml#/definitions/string + enum: + - pass-through + - clock inverted + - data on rising edge + - data on falling edge + - data on both edges + description: | + IO synchronization through re-sampling or inversion + "pass-through" - data or clock GPIO pass-through + "clock inverted" - clock GPIO inverted + "data on rising edge" - data GPIO re-sampled on clock rising edge + "data on falling edge" - data GPIO re-sampled on clock falling edge + "data on both edges" - data GPIO re-sampled on both clock edges + default: pass-through required: - pinmux + # Not allowed both skew-delay-input-ps and skew-delay-output-ps + if: + required: + - skew-delay-input-ps + then: + properties: + skew-delay-output-ps: false + allOf: - $ref: pinctrl.yaml# + - if: + not: + properties: + compatible: + contains: + enum: + - st,stm32mp257-pinctrl + - st,stm32mp257-z-pinctrl + then: + patternProperties: + '-[0-9]*$': + patternProperties: + '^pins': + properties: + skew-delay-input-ps: false + skew-delay-output-ps: false + st,io-sync: false + required: - compatible - '#address-cells' @@ -311,4 +359,25 @@ examples: pinctrl-names = "default"; }; + - | + #include <dt-bindings/pinctrl/stm32-pinfunc.h> + //Example 4 skew-delay and st,io-sync + pinctrl: pinctrl@44240000 { + compatible = "st,stm32mp257-pinctrl"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x44240000 0xa0400>; + + eth3_rgmii_pins_a: eth3-rgmii-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 6, AF14)>; + st,io-sync = "data on both edges"; + }; + pins2 { + pinmux = <STM32_PINMUX('H', 2, AF14)>; + skew-delay-output-ps = <500>; + }; + }; + }; + ... diff --git a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml index ce04d2eadec9..0eff0a0ee9e9 100644 --- a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml @@ -42,7 +42,6 @@ patternProperties: function: description: Function to mux. - $ref: /schemas/types.yaml#/definitions/string enum: [i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c8, spi0, spi1, spi2, spi3, spi4, spi5, spi6, uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in] diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml index 661c2b425da3..137f95028313 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml @@ -24,6 +24,7 @@ properties: - qcom,msm8998-adsp-pas - qcom,msm8998-slpi-pas - qcom,sdm660-adsp-pas + - qcom,sdm660-cdsp-pas - qcom,sdm845-adsp-pas - qcom,sdm845-cdsp-pas - qcom,sdm845-slpi-pas @@ -31,9 +32,6 @@ properties: reg: maxItems: 1 - cx-supply: - description: Phandle to the CX regulator - px-supply: description: Phandle to the PX regulator @@ -69,6 +67,8 @@ allOf: - qcom,msm8996-slpi-pil - qcom,msm8998-adsp-pas - qcom,msm8998-slpi-pas + - qcom,sdm660-adsp-pas + - qcom,sdm660-cdsp-pas - qcom,sdm845-adsp-pas - qcom,sdm845-cdsp-pas - qcom,sdm845-slpi-pas @@ -93,6 +93,8 @@ allOf: - qcom,msm8996-slpi-pil - qcom,msm8998-adsp-pas - qcom,msm8998-slpi-pas + - qcom,sdm660-adsp-pas + - qcom,sdm660-cdsp-pas - qcom,sdm845-adsp-pas - qcom,sdm845-cdsp-pas - qcom,sdm845-slpi-pas @@ -108,20 +110,13 @@ allOf: compatible: contains: enum: - - qcom,msm8974-adsp-pil - then: - required: - - cx-supply - - - if: - properties: - compatible: - contains: - enum: - qcom,msm8226-adsp-pil - qcom,msm8953-adsp-pil + - qcom,msm8974-adsp-pil - qcom,msm8996-adsp-pil - qcom,msm8998-adsp-pas + - qcom,sdm660-adsp-pas + - qcom,sdm660-cdsp-pas then: properties: power-domains: @@ -178,6 +173,7 @@ allOf: - qcom,msm8998-adsp-pas - qcom,msm8998-slpi-pas - qcom,sdm660-adsp-pas + - qcom,sdm660-cdsp-pas then: properties: qcom,qmp: false @@ -187,6 +183,7 @@ examples: #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/qcom-rpmpd.h> adsp { compatible = "qcom,msm8974-adsp-pil"; @@ -204,7 +201,8 @@ examples: clocks = <&rpmcc RPM_CXO_CLK>; clock-names = "xo"; - cx-supply = <&pm8841_s2>; + power-domains = <&rpmpd MSM8974_VDDCX>; + power-domain-names = "cx"; memory-region = <&adsp_region>; diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml index 96d53baf6e00..5dbda3a55047 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml @@ -91,9 +91,13 @@ allOf: power-domains: items: - description: NSP power domain + - description: CX power domain + - description: MXC power domain power-domain-names: items: - const: nsp + - const: cx + - const: mxc unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml index b243afa69a1a..167ddcbd8800 100644 --- a/Documentation/devicetree/bindings/serial/8250.yaml +++ b/Documentation/devicetree/bindings/serial/8250.yaml @@ -125,6 +125,8 @@ properties: - nxp,lpc1850-uart - opencores,uart16550-rtlsvn105 - ti,da830-uart + - loongson,ls2k0500-uart + - loongson,ls2k1500-uart - const: ns16550a - items: - enum: @@ -169,6 +171,18 @@ properties: - nvidia,tegra194-uart - nvidia,tegra234-uart - const: nvidia,tegra20-uart + - items: + - enum: + - loongson,ls2k1000-uart + - const: loongson,ls2k0500-uart + - const: ns16550a + - items: + - enum: + - loongson,ls3a5000-uart + - loongson,ls3a6000-uart + - loongson,ls2k2000-uart + - const: loongson,ls2k1500-uart + - const: ns16550a reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/serial/renesas,rsci.yaml b/Documentation/devicetree/bindings/serial/renesas,rsci.yaml index f50d8e02f476..6b1f827a335b 100644 --- a/Documentation/devicetree/bindings/serial/renesas,rsci.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,rsci.yaml @@ -54,8 +54,6 @@ properties: power-domains: maxItems: 1 - uart-has-rtscts: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 1a1f991d5364..75ac2a08f257 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -48,7 +48,9 @@ properties: - const: samsung,exynos850-uart - items: - enum: + - axis,artpec9-uart - samsung,exynos7870-uart + - samsung,exynos8890-uart - const: samsung,exynos8895-uart reg: diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml index 691bd0bac6be..6efe43089a74 100644 --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml @@ -65,6 +65,7 @@ properties: - rockchip,rk3328-uart - rockchip,rk3368-uart - rockchip,rk3399-uart + - rockchip,rk3506-uart - rockchip,rk3528-uart - rockchip,rk3562-uart - rockchip,rk3568-uart diff --git a/Documentation/devicetree/bindings/slimbus/slimbus.yaml b/Documentation/devicetree/bindings/slimbus/slimbus.yaml index 89017d9cda10..5a941610ce4e 100644 --- a/Documentation/devicetree/bindings/slimbus/slimbus.yaml +++ b/Documentation/devicetree/bindings/slimbus/slimbus.yaml @@ -75,16 +75,22 @@ examples: #size-cells = <1>; ranges; - slim@28080000 { + controller@28080000 { compatible = "qcom,slim-ngd-v1.5.0"; reg = <0x091c0000 0x2c000>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <2>; + dmas = <&slimbam 3>, <&slimbam 4>; + dma-names = "rx", "tx"; + #address-cells = <1>; #size-cells = <0>; - - audio-codec@1,0 { + slim@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + codec@1,0 { compatible = "slim217,1a0"; reg = <1 0>; + }; }; + }; }; - }; diff --git a/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-mss-top-sysreg.yaml b/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-mss-top-sysreg.yaml index 1ab691db8795..39987f722411 100644 --- a/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-mss-top-sysreg.yaml +++ b/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-mss-top-sysreg.yaml @@ -18,10 +18,17 @@ properties: items: - const: microchip,mpfs-mss-top-sysreg - const: syscon + - const: simple-mfd reg: maxItems: 1 + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + '#reset-cells': description: The AHB/AXI peripherals on the PolarFire SoC have reset support, so @@ -31,6 +38,10 @@ properties: of PolarFire clock/reset IDs. const: 1 + pinctrl@200: + type: object + $ref: /schemas/pinctrl/microchip,mpfs-pinctrl-iomux0.yaml + required: - compatible - reg @@ -40,7 +51,7 @@ additionalProperties: false examples: - | syscon@20002000 { - compatible = "microchip,mpfs-mss-top-sysreg", "syscon"; + compatible = "microchip,mpfs-mss-top-sysreg", "syscon", "simple-mfd"; reg = <0x20002000 0x1000>; #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 057b32048f53..d0f7dbf15d6f 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -121,8 +121,6 @@ properties: - fsl,mma7660 # MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer - fsl,mma8450 - # MPL3115: Absolute Digital Pressure Sensor - - fsl,mpl3115 # MPR121: Proximity Capacitive Touch Sensor Controller - fsl,mpr121 # Honeywell Humidicon HIH-6130 humidity/temperature sensor @@ -135,8 +133,6 @@ properties: - ibm,cffps2 # IBM On-Chip Controller hwmon device - ibm,p8-occ-hwmon - # Infineon barometric pressure and temperature sensor - - infineon,dps310 # Infineon IR36021 digital POL buck controller - infineon,ir36021 # Infineon IRPS5401 Voltage Regulator (PMIC) diff --git a/Documentation/devicetree/bindings/usb/apple,dwc3.yaml b/Documentation/devicetree/bindings/usb/apple,dwc3.yaml new file mode 100644 index 000000000000..f70c33f32c5d --- /dev/null +++ b/Documentation/devicetree/bindings/usb/apple,dwc3.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/apple,dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple Silicon DWC3 USB controller + +maintainers: + - Sven Peter <sven@kernel.org> + +description: + Apple Silicon SoCs use a Synopsys DesignWare DWC3 based controller for each of + their Type-C ports. + +allOf: + - $ref: snps,dwc3-common.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - apple,t6000-dwc3 + - apple,t6020-dwc3 + - apple,t8112-dwc3 + - const: apple,t8103-dwc3 + - const: apple,t8103-dwc3 + + reg: + items: + - description: Core DWC3 region + - description: Apple-specific DWC3 region + + reg-names: + items: + - const: dwc3-core + - const: dwc3-apple + + interrupts: + maxItems: 1 + + iommus: + maxItems: 2 + + resets: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + - iommus + - resets + - power-domains + - usb-role-switch + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/apple-aic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + usb@82280000 { + compatible = "apple,t8103-dwc3"; + reg = <0x82280000 0xcd00>, <0x8228cd00 0x3200>; + reg-names = "dwc3-core", "dwc3-apple"; + interrupts = <AIC_IRQ 777 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&dwc3_0_dart_0 0>, <&dwc3_0_dart_1 1>; + + power-domains = <&ps_atc0_usb>; + resets = <&atcphy0>; + + usb-role-switch; + }; diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml index 36f5c644d959..d6823ef5f9a7 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml +++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml @@ -47,6 +47,7 @@ properties: - const: ref_clk resets: + minItems: 1 description: A list of phandles for resets listed in reset-names. @@ -56,6 +57,7 @@ properties: - description: USB APB reset reset-names: + minItems: 1 items: - const: usb_crst - const: usb_hibrst @@ -95,6 +97,26 @@ required: - resets - reset-names +allOf: + - if: + properties: + compatible: + contains: + enum: + - xlnx,versal-dwc3 + then: + properties: + resets: + maxItems: 1 + reset-names: + maxItems: 1 + else: + properties: + resets: + minItems: 3 + reset-names: + minItems: 3 + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/eswin,eic7700-usb.yaml b/Documentation/devicetree/bindings/usb/eswin,eic7700-usb.yaml new file mode 100644 index 000000000000..41c3b1b98991 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/eswin,eic7700-usb.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/eswin,eic7700-usb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ESWIN EIC7700 SoC Usb Controller + +maintainers: + - Wei Yang <yangwei1@eswincomputing.com> + - Senchuan Zhang <zhangsenchuan@eswincomputing.com> + - Hang Cao <caohang@eswincomputing.com> + +description: + The Usb controller on EIC7700 SoC. + +allOf: + - $ref: snps,dwc3-common.yaml# + +properties: + compatible: + const: eswin,eic7700-dwc3 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: peripheral + + clocks: + maxItems: 3 + + clock-names: + items: + - const: aclk + - const: cfg + - const: usb_en + + resets: + maxItems: 2 + + reset-names: + items: + - const: vaux + - const: usb_rst + + eswin,hsp-sp-csr: + description: + HSP CSR is to control and get status of different high-speed peripherals + (such as Ethernet, USB, SATA, etc.) via register, which can tune + board-level's parameters of PHY, etc. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to HSP Register Controller hsp_sp_csr node. + - description: USB bus register offset. + - description: AXI low power register offset. + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - interrupt-names + - resets + - reset-names + - eswin,hsp-sp-csr + +unevaluatedProperties: false + +examples: + - | + usb@50480000 { + compatible = "eswin,eic7700-dwc3"; + reg = <0x50480000 0x10000>; + clocks = <&clock 135>, + <&clock 136>, + <&hspcrg 18>; + clock-names = "aclk", "cfg", "usb_en"; + interrupt-parent = <&plic>; + interrupts = <85>; + interrupt-names = "peripheral"; + resets = <&reset 84>, <&hspcrg 2>; + reset-names = "vaux", "usb_rst"; + dr_mode = "peripheral"; + maximum-speed = "high-speed"; + phy_type = "utmi"; + eswin,hsp-sp-csr = <&hsp_sp_csr 0x800 0x818>; + }; diff --git a/Documentation/devicetree/bindings/usb/fsl,ls1028a.yaml b/Documentation/devicetree/bindings/usb/fsl,ls1028a.yaml index a44bdf391887..4784f057264a 100644 --- a/Documentation/devicetree/bindings/usb/fsl,ls1028a.yaml +++ b/Documentation/devicetree/bindings/usb/fsl,ls1028a.yaml @@ -9,21 +9,19 @@ title: Freescale layerscape SuperSpeed DWC3 USB SoC controller maintainers: - Frank Li <Frank.Li@nxp.com> -select: - properties: - compatible: - contains: - enum: - - fsl,ls1028a-dwc3 - required: - - compatible - properties: compatible: - items: - - enum: - - fsl,ls1028a-dwc3 - - const: snps,dwc3 + oneOf: + - items: + - enum: + - fsl,ls1012a-dwc3 + - fsl,ls1043a-dwc3 + - fsl,ls1046a-dwc3 + - fsl,ls1088a-dwc3 + - fsl,ls208xa-dwc3 + - fsl,lx2160a-dwc3 + - const: fsl,ls1028a-dwc3 + - const: fsl,ls1028a-dwc3 reg: maxItems: 1 @@ -31,6 +29,11 @@ properties: interrupts: maxItems: 1 + iommus: + maxItems: 1 + + dma-coherent: true + unevaluatedProperties: false required: @@ -39,14 +42,14 @@ required: - interrupts allOf: - - $ref: snps,dwc3.yaml# + - $ref: snps,dwc3-common.yaml# examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> usb@fe800000 { - compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; + compatible = "fsl,ls1028a-dwc3"; reg = <0xfe800000 0x100000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml b/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml index ca677d1a8274..d06efe4dbb3b 100644 --- a/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml +++ b/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml @@ -36,6 +36,7 @@ properties: - fsl,imx8mm-usbmisc - fsl,imx8mn-usbmisc - fsl,imx8ulp-usbmisc + - fsl,imx94-usbmisc - fsl,imx95-usbmisc - const: fsl,imx7d-usbmisc - const: fsl,imx6q-usbmisc diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index 508d958e698c..4e84bead0232 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -46,6 +46,7 @@ properties: - aspeed,ast2400-ehci - aspeed,ast2500-ehci - aspeed,ast2600-ehci + - aspeed,ast2700-ehci - brcm,bcm3384-ehci - brcm,bcm63268-ehci - brcm,bcm6328-ehci diff --git a/Documentation/devicetree/bindings/usb/generic-xhci.yaml b/Documentation/devicetree/bindings/usb/generic-xhci.yaml index a2b94a138999..62678abd74b5 100644 --- a/Documentation/devicetree/bindings/usb/generic-xhci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-xhci.yaml @@ -14,12 +14,15 @@ properties: oneOf: - description: Generic xHCI device const: generic-xhci - - description: Armada 37xx/375/38x/8k SoCs + - description: Armada 375/38x SoCs items: - enum: - - marvell,armada3700-xhci - marvell,armada-375-xhci - marvell,armada-380-xhci + - description: Armada 37xx/8k SoCs + items: + - enum: + - marvell,armada3700-xhci - marvell,armada-8k-xhci - const: generic-xhci - description: Broadcom SoCs with power domains @@ -53,6 +56,14 @@ properties: dma-coherent: true + dr_mode: + enum: + - host + - otg + + iommus: + maxItems: 1 + power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml index 004d3ebec091..231e6f35a986 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml @@ -34,6 +34,7 @@ properties: - mediatek,mt8183-xhci - mediatek,mt8186-xhci - mediatek,mt8188-xhci + - mediatek,mt8189-xhci - mediatek,mt8192-xhci - mediatek,mt8195-xhci - mediatek,mt8365-xhci @@ -168,7 +169,8 @@ properties: 104 - used by mt8195, IP1, specific 1.04; 105 - used by mt8195, IP2, specific 1.05; 106 - used by mt8195, IP3, specific 1.06; - enum: [1, 2, 101, 102, 103, 104, 105, 106] + 110 - used by mt8189, IP4, specific 1.10; + enum: [1, 2, 101, 102, 103, 104, 105, 106, 110] mediatek,u3p-dis-msk: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml index d49a58d5478f..8cee7c5582f2 100644 --- a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml @@ -24,6 +24,8 @@ properties: compatible: items: - enum: + - qcom,glymur-dwc3 + - qcom,glymur-dwc3-mp - qcom,ipq4019-dwc3 - qcom,ipq5018-dwc3 - qcom,ipq5332-dwc3 @@ -32,6 +34,7 @@ properties: - qcom,ipq8064-dwc3 - qcom,ipq8074-dwc3 - qcom,ipq9574-dwc3 + - qcom,kaanapali-dwc3 - qcom,milos-dwc3 - qcom,msm8953-dwc3 - qcom,msm8994-dwc3 @@ -67,6 +70,7 @@ properties: - qcom,sm8450-dwc3 - qcom,sm8550-dwc3 - qcom,sm8650-dwc3 + - qcom,sm8750-dwc3 - qcom,x1e80100-dwc3 - qcom,x1e80100-dwc3-mp - const: qcom,snps-dwc3 @@ -200,6 +204,7 @@ allOf: contains: enum: - qcom,ipq9574-dwc3 + - qcom,kaanapali-dwc3 - qcom,msm8953-dwc3 - qcom,msm8996-dwc3 - qcom,msm8998-dwc3 @@ -213,6 +218,7 @@ allOf: - qcom,sdx65-dwc3 - qcom,sdx75-dwc3 - qcom,sm6350-dwc3 + - qcom,sm8750-dwc3 then: properties: clocks: @@ -392,6 +398,28 @@ allOf: compatible: contains: enum: + - qcom,glymur-dwc3 + - qcom,glymur-dwc3-mp + + then: + properties: + clocks: + maxItems: 7 + clock-names: + items: + - const: cfg_noc + - const: core + - const: iface + - const: sleep + - const: mock_utmi + - const: noc_aggr_north + - const: noc_aggr_south + + - if: + properties: + compatible: + contains: + enum: - qcom,ipq5018-dwc3 - qcom,ipq6018-dwc3 - qcom,ipq8074-dwc3 @@ -456,6 +484,7 @@ allOf: compatible: contains: enum: + - qcom,glymur-dwc3 - qcom,milos-dwc3 - qcom,x1e80100-dwc3 then: @@ -479,6 +508,7 @@ allOf: enum: - qcom,ipq4019-dwc3 - qcom,ipq8064-dwc3 + - qcom,kaanapali-dwc3 - qcom,msm8994-dwc3 - qcom,qcs615-dwc3 - qcom,qcs8300-dwc3 @@ -501,6 +531,7 @@ allOf: - qcom,sm8450-dwc3 - qcom,sm8550-dwc3 - qcom,sm8650-dwc3 + - qcom,sm8750-dwc3 then: properties: interrupts: @@ -521,6 +552,7 @@ allOf: compatible: contains: enum: + - qcom,glymur-dwc3-mp - qcom,sc8180x-dwc3-mp - qcom,x1e80100-dwc3-mp then: diff --git a/Documentation/devicetree/bindings/usb/renesas,rzg3e-xhci.yaml b/Documentation/devicetree/bindings/usb/renesas,rzg3e-xhci.yaml index 98260f9fb442..3f4b09e48ce0 100644 --- a/Documentation/devicetree/bindings/usb/renesas,rzg3e-xhci.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,rzg3e-xhci.yaml @@ -4,14 +4,22 @@ $id: http://devicetree.org/schemas/usb/renesas,rzg3e-xhci.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Renesas RZ/G3E USB 3.2 Gen2 Host controller +title: Renesas USB 3.2 Gen2 Host controller maintainers: - Biju Das <biju.das.jz@bp.renesas.com> properties: compatible: - const: renesas,r9a09g047-xhci + oneOf: + - items: + - enum: + - renesas,r9a09g056-xhci # RZ/V2N + - renesas,r9a09g057-xhci # RZ/V2H(P) + - const: renesas,r9a09g047-xhci + + - items: + - const: renesas,r9a09g047-xhci # RZ/G3E reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml b/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml index 6d39e5066944..8af0143c3e47 100644 --- a/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml @@ -22,6 +22,9 @@ properties: - samsung,exynos850-dwusb3 - samsung,exynosautov920-dwusb3 - items: + - const: samsung,exynos8890-dwusb3 + - const: samsung,exynos7-dwusb3 + - items: - const: samsung,exynos990-dwusb3 - const: samsung,exynos850-dwusb3 @@ -36,6 +39,9 @@ properties: minItems: 1 maxItems: 4 + power-domains: + maxItems: 1 + ranges: true '#size-cells': diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml index bec1c8047bc0..06099e93c6c3 100644 --- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml @@ -25,6 +25,14 @@ properties: interrupts: maxItems: 1 + id-gpios: + description: + An input gpio for USB ID pin. Upon detecting a UFP device, HD3SS3220 + will keep ID pin high if VBUS is not at VSafe0V. Once VBUS is at VSafe0V, + the HD3SS3220 will assert ID pin low. This is done to enforce Type-C + requirement that VBUS must be at VSafe0V before re-enabling VBUS. + maxItems: 1 + ports: $ref: /schemas/graph.yaml#/properties/ports description: OF graph bindings (specified in bindings/graph.txt) that model diff --git a/Documentation/devicetree/bindings/usb/usb-uhci.yaml b/Documentation/devicetree/bindings/usb/usb-uhci.yaml index d8336f72dc1f..e050ca203945 100644 --- a/Documentation/devicetree/bindings/usb/usb-uhci.yaml +++ b/Documentation/devicetree/bindings/usb/usb-uhci.yaml @@ -20,6 +20,7 @@ properties: - aspeed,ast2400-uhci - aspeed,ast2500-uhci - aspeed,ast2600-uhci + - aspeed,ast2700-uhci - const: generic-uhci reg: @@ -28,6 +29,9 @@ properties: interrupts: maxItems: 1 + resets: + maxItems: 1 + '#ports': $ref: /schemas/types.yaml#/definitions/uint32 @@ -50,6 +54,15 @@ allOf: required: - clocks + - if: + properties: + compatible: + contains: + const: aspeed,ast2700-uhci + then: + required: + - resets + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/watchdog/airoha,en7581-wdt.yaml b/Documentation/devicetree/bindings/watchdog/airoha,en7581-wdt.yaml index 6bbab3cb28e5..6259478bdae5 100644 --- a/Documentation/devicetree/bindings/watchdog/airoha,en7581-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/airoha,en7581-wdt.yaml @@ -14,7 +14,11 @@ allOf: properties: compatible: - const: airoha,en7581-wdt + oneOf: + - items: + - const: airoha,an7583-wdt + - const: airoha,en7581-wdt + - const: airoha,en7581-wdt reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml b/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml index be78a9865584..9322cb5b462a 100644 --- a/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml @@ -15,6 +15,7 @@ properties: - aspeed,ast2400-wdt - aspeed,ast2500-wdt - aspeed,ast2600-wdt + - aspeed,ast2700-wdt reg: maxItems: 1 @@ -87,13 +88,15 @@ properties: aspeed,reset-mask: $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 - maxItems: 2 + maxItems: 5 description: > A bitmask indicating which peripherals will be reset if the watchdog timer expires. On AST2500 SoCs this should be a single word defined using the AST2500_WDT_RESET_* macros; on AST2600 SoCs this should be a two-word array with the first word defined using the AST2600_WDT_RESET1_* macros, - and the second word defined using the AST2600_WDT_RESET2_* macros. + and the second word defined using the AST2600_WDT_RESET2_* macros; on + AST2700 SoCs, this should be five-word array from AST2700_WDT_RESET1_* + macros to AST2700_WDT_RESET5_* macros. required: - compatible @@ -114,6 +117,7 @@ allOf: enum: - aspeed,ast2500-wdt - aspeed,ast2600-wdt + - aspeed,ast2700-wdt - if: required: - aspeed,ext-active-high diff --git a/Documentation/devicetree/bindings/watchdog/lantiq,wdt.yaml b/Documentation/devicetree/bindings/watchdog/lantiq,wdt.yaml new file mode 100644 index 000000000000..a7edae9ca05a --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/lantiq,wdt.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/lantiq,wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lantiq WTD watchdog + +maintainers: + - Hauke Mehrtens <hauke@hauke-m.de> + +properties: + compatible: + oneOf: + - enum: + - lantiq,falcon-wdt + - lantiq,wdt + - lantiq,xrx100-wdt + - items: + - enum: + - lantiq,xrx200-wdt + - const: lantiq,xrx100-wdt + + reg: + maxItems: 1 + + lantiq,rcu: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle to the RCU syscon node + +required: + - compatible + - reg + +allOf: + - $ref: watchdog.yaml# + - if: + properties: + compatible: + contains: + enum: + - lantiq,xrx100-wdt + - lantiq,falcon-wdt + then: + required: + - lantiq,rcu + +unevaluatedProperties: false + +examples: + - | + watchdog@803f0 { + compatible = "lantiq,xrx200-wdt", "lantiq,xrx100-wdt"; + reg = <0x803f0 0x10>; + + lantiq,rcu = <&rcu0>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/lantiq-wdt.txt b/Documentation/devicetree/bindings/watchdog/lantiq-wdt.txt deleted file mode 100644 index 18d4d8302702..000000000000 --- a/Documentation/devicetree/bindings/watchdog/lantiq-wdt.txt +++ /dev/null @@ -1,24 +0,0 @@ -Lantiq WTD watchdog binding -============================ - -This describes the binding of the Lantiq watchdog driver. - -------------------------------------------------------------------------------- -Required properties: -- compatible : Should be one of - "lantiq,wdt" - "lantiq,xrx100-wdt" - "lantiq,xrx200-wdt", "lantiq,xrx100-wdt" - "lantiq,falcon-wdt" -- reg : Address of the watchdog block -- lantiq,rcu : A phandle to the RCU syscon (required for - "lantiq,falcon-wdt" and "lantiq,xrx100-wdt") - -------------------------------------------------------------------------------- -Example for the watchdog on the xRX200 SoCs: - watchdog@803f0 { - compatible = "lantiq,xrx200-wdt", "lantiq,xrx100-wdt"; - reg = <0x803f0 0x10>; - - lantiq,rcu = <&rcu0>; - }; diff --git a/Documentation/devicetree/bindings/watchdog/loongson,ls1x-wdt.yaml b/Documentation/devicetree/bindings/watchdog/loongson,ls1x-wdt.yaml index 81690d4b62a6..50a9b468c4a3 100644 --- a/Documentation/devicetree/bindings/watchdog/loongson,ls1x-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/loongson,ls1x-wdt.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/watchdog/loongson,ls1x-wdt.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Loongson-1 Watchdog Timer +title: Loongson Watchdog Timer maintainers: - Keguang Zhang <keguang.zhang@gmail.com> @@ -17,6 +17,7 @@ properties: enum: - loongson,ls1b-wdt - loongson,ls1c-wdt + - loongson,ls2k0300-wdt reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/watchdog/marvel.txt b/Documentation/devicetree/bindings/watchdog/marvel.txt deleted file mode 100644 index c1b67a78f00c..000000000000 --- a/Documentation/devicetree/bindings/watchdog/marvel.txt +++ /dev/null @@ -1,45 +0,0 @@ -* Marvell Orion Watchdog Time - -Required Properties: - -- Compatibility : "marvell,orion-wdt" - "marvell,armada-370-wdt" - "marvell,armada-xp-wdt" - "marvell,armada-375-wdt" - "marvell,armada-380-wdt" - -- reg : Should contain two entries: first one with the - timer control address, second one with the - rstout enable address. - -For "marvell,armada-375-wdt" and "marvell,armada-380-wdt": - -- reg : A third entry is mandatory and should contain the - shared mask/unmask RSTOUT address. - -Clocks required for compatibles = "marvell,orion-wdt", - "marvell,armada-370-wdt": -- clocks : Must contain a single entry describing the clock input - -Clocks required for compatibles = "marvell,armada-xp-wdt" - "marvell,armada-375-wdt" - "marvell,armada-380-wdt": -- clocks : Must contain an entry for each entry in clock-names. -- clock-names : Must include the following entries: - "nbclk" (L2/coherency fabric clock), - "fixed" (Reference 25 MHz fixed-clock). - -Optional properties: - -- interrupts : Contains the IRQ for watchdog expiration -- timeout-sec : Contains the watchdog timeout in seconds - -Example: - - wdt@20300 { - compatible = "marvell,orion-wdt"; - reg = <0x20300 0x28>, <0x20108 0x4>; - interrupts = <3>; - timeout-sec = <10>; - clocks = <&gate_clk 7>; - }; diff --git a/Documentation/devicetree/bindings/watchdog/marvell,orion-wdt.yaml b/Documentation/devicetree/bindings/watchdog/marvell,orion-wdt.yaml new file mode 100644 index 000000000000..fdc7bc45dfde --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/marvell,orion-wdt.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/marvell,orion-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Orion Watchdog Timer + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Gregory Clement <gregory.clement@bootlin.com> + +properties: + compatible: + enum: + - marvell,orion-wdt + - marvell,armada-370-wdt + - marvell,armada-xp-wdt + - marvell,armada-375-wdt + - marvell,armada-380-wdt + + reg: + minItems: 2 + items: + - description: Timer control register address + - description: RSTOUT enable register address + - description: Shared mask/unmask RSTOUT register address + + clocks: + minItems: 1 + items: + - description: L2/coherency fabric clock input + - description: Reference 25 MHz fixed-clock supply + + clock-names: + minItems: 1 + items: + - const: nbclk + - const: fixed + + interrupts: + minItems: 1 + items: + - description: timeout + - description: pre-timeout + +allOf: + - $ref: watchdog.yaml# + - if: + properties: + compatible: + contains: + enum: + - marvell,armada-375-wdt + - marvell,armada-380-wdt + then: + properties: + reg: + minItems: 3 + else: + properties: + reg: + maxItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - marvell,armada-xp-wdt + - marvell,armada-375-wdt + - marvell,armada-380-wdt + then: + properties: + clocks: + minItems: 2 + clock-names: + minItems: 2 + interrupts: + minItems: 2 + + required: + - clock-names + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + watchdog@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>, <0x20108 0x4>; + interrupts = <3>; + timeout-sec = <10>; + clocks = <&gate_clk 7>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml b/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml index ba0bfd73ab62..953629cb9558 100644 --- a/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml @@ -41,6 +41,8 @@ properties: - mediatek,mt7623-wdt - mediatek,mt7629-wdt - mediatek,mt8173-wdt + - mediatek,mt8188-wdt + - mediatek,mt8189-wdt - mediatek,mt8365-wdt - mediatek,mt8516-wdt - const: mediatek,mt6589-wdt diff --git a/Documentation/devicetree/bindings/watchdog/omap-wdt.txt b/Documentation/devicetree/bindings/watchdog/omap-wdt.txt deleted file mode 100644 index 1fa20e453a2d..000000000000 --- a/Documentation/devicetree/bindings/watchdog/omap-wdt.txt +++ /dev/null @@ -1,15 +0,0 @@ -TI Watchdog Timer (WDT) Controller for OMAP - -Required properties: -- compatible : "ti,omap3-wdt" for OMAP3 or "ti,omap4-wdt" for OMAP4 -- ti,hwmods : Name of the hwmod associated to the WDT - -Optional properties: -- timeout-sec : default watchdog timeout in seconds - -Examples: - -wdt2: wdt@4a314000 { - compatible = "ti,omap4-wdt", "ti,omap3-wdt"; - ti,hwmods = "wd_timer2"; -}; diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml index 49e2b807db0b..54f5311ed016 100644 --- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml @@ -22,6 +22,7 @@ properties: - qcom,apss-wdt-ipq5332 - qcom,apss-wdt-ipq5424 - qcom,apss-wdt-ipq9574 + - qcom,apss-wdt-kaanapali - qcom,apss-wdt-msm8226 - qcom,apss-wdt-msm8974 - qcom,apss-wdt-msm8994 diff --git a/Documentation/devicetree/bindings/watchdog/renesas,r9a09g057-wdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,r9a09g057-wdt.yaml new file mode 100644 index 000000000000..099200c4f136 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/renesas,r9a09g057-wdt.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/renesas,r9a09g057-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/V2H(P) Watchdog Timer (WDT) Controller + +maintainers: + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,r9a09g047-wdt # RZ/G3E + - renesas,r9a09g056-wdt # RZ/V2N + - const: renesas,r9a09g057-wdt # RZ/V2H(P) + + - items: + - const: renesas,r9a09g087-wdt # RZ/N2H + - const: renesas,r9a09g077-wdt # RZ/T2H + + - enum: + - renesas,r9a09g057-wdt # RZ/V2H(P) + - renesas,r9a09g077-wdt # RZ/T2H + + reg: + minItems: 1 + maxItems: 2 + + clocks: + minItems: 1 + items: + - description: Register access clock + - description: Main clock + + clock-names: + minItems: 1 + items: + - const: pclk + - const: oscclk + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + timeout-sec: true + +required: + - compatible + - reg + - clocks + - clock-names + - power-domains + +allOf: + - $ref: watchdog.yaml# + + - if: + properties: + compatible: + contains: + const: renesas,r9a09g057-wdt + then: + properties: + reg: + maxItems: 1 + clocks: + minItems: 2 + clock-names: + minItems: 2 + else: + properties: + clocks: + maxItems: 1 + clock-names: + maxItems: 1 + reg: + minItems: 2 + resets: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/renesas,r9a09g057-cpg.h> + + watchdog@11c00400 { + compatible = "renesas,r9a09g057-wdt"; + reg = <0x11c00400 0x400>; + clocks = <&cpg CPG_MOD 0x4b>, <&cpg CPG_MOD 0x4c>; + clock-names = "pclk", "oscclk"; + resets = <&cpg 0x75>; + power-domains = <&cpg>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/renesas,rcar-gen3-wwdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,rcar-gen3-wwdt.yaml new file mode 100644 index 000000000000..ffafe9a6d3f5 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/renesas,rcar-gen3-wwdt.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/renesas,rcar-gen3-wwdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Window Watchdog Timer (WWDT) Controller + +maintainers: + - Wolfram Sang <wsa+renesas@sang-engineering.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,r8a77970-wwdt # R-Car V3M + - renesas,r8a77980-wwdt # R-Car V3H + - const: renesas,rcar-gen3-wwdt + + - items: + - enum: + - renesas,r8a779a0-wwdt # R-Car V3U + - renesas,r8a779f0-wwdt # R-Car S4 + - renesas,r8a779g0-wwdt # R-Car V4H + - renesas,r8a779h0-wwdt # R-Car V4M + - const: renesas,rcar-gen4-wwdt + + reg: + maxItems: 1 + + interrupts: + items: + - description: Pretimeout, 75% of overflow reached + - description: Error occurred + + interrupt-names: + items: + - const: pretimeout + - const: error + + clocks: + items: + - description: Counting clock + - description: Bus clock + + clock-names: + items: + - const: cnt + - const: bus + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 + items: + - const: cnt + - const: bus + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - power-domains + +allOf: + - $ref: watchdog.yaml# + + - if: + properties: + compatible: + contains: + enum: + - renesas,r8a779a0-wwdt + - renesas,r8a779f0-wwdt + then: + properties: + resets: + minItems: 2 + reset-names: + minItems: 2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a779g0-cpg-mssr.h> + #include <dt-bindings/power/r8a779g0-sysc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + watchdog@ffc90000 { + compatible = "renesas,r8a779g0-wwdt", + "renesas,rcar-gen4-wwdt"; + reg = <0xffc90000 0x10>; + interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pretimeout", "error"; + clocks = <&cpg CPG_CORE R8A779G0_CLK_R>, + <&cpg CPG_CORE R8A779G0_CLK_SASYNCRT>; + clock-names = "cnt", "bus"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 1200>; + reset-names = "cnt"; + }; diff --git a/Documentation/devicetree/bindings/watchdog/renesas,rza-wdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,rza-wdt.yaml new file mode 100644 index 000000000000..ba922c3f7b10 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/renesas,rza-wdt.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/renesas,rza-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/A Watchdog Timer (WDT) Controller + +maintainers: + - Wolfram Sang <wsa+renesas@sang-engineering.com> + +properties: + compatible: + items: + - enum: + - renesas,r7s72100-wdt # RZ/A1 + - renesas,r7s9210-wdt # RZ/A2 + - const: renesas,rza-wdt # RZ/A + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + timeout-sec: true + +required: + - compatible + - reg + - clocks + +allOf: + - $ref: watchdog.yaml# + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r7s72100-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + watchdog@fcfe0000 { + compatible = "renesas,r7s72100-wdt", "renesas,rza-wdt"; + reg = <0xfcfe0000 0x6>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&p0_clk>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/renesas,rzg2l-wdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,rzg2l-wdt.yaml new file mode 100644 index 000000000000..a4d06c9c8b86 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/renesas,rzg2l-wdt.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/renesas,rzg2l-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L Watchdog Timer (WDT) Controller + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,r9a07g043-wdt # RZ/G2UL and RZ/Five + - renesas,r9a07g044-wdt # RZ/G2{L,LC} + - renesas,r9a07g054-wdt # RZ/V2L + - renesas,r9a08g045-wdt # RZ/G3S + - const: renesas,rzg2l-wdt + + - items: + - const: renesas,r9a09g011-wdt # RZ/V2M + - const: renesas,rzv2m-wdt # RZ/V2M + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + items: + - description: Timeout + - description: Parity error + + interrupt-names: + minItems: 1 + items: + - const: wdt + - const: perrout + + clocks: + items: + - description: Register access clock + - description: Main clock + + clock-names: + items: + - const: pclk + - const: oscclk + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + timeout-sec: true + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + - resets + +allOf: + - $ref: watchdog.yaml# + + - if: + properties: + compatible: + contains: + const: renesas,rzg2l-wdt + then: + properties: + interrupts: + minItems: 2 + interrupt-names: + minItems: 2 + required: + - interrupt-names + else: + properties: + interrupts: + maxItems: 1 + interrupt-names: + maxItems: 1 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r9a07g044-cpg.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + watchdog@12800800 { + compatible = "renesas,r9a07g044-wdt", + "renesas,rzg2l-wdt"; + reg = <0x12800800 0x400>; + clocks = <&cpg CPG_MOD R9A07G044_WDT0_PCLK>, + <&cpg CPG_MOD R9A07G044_WDT0_CLK>; + clock-names = "pclk", "oscclk"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "wdt", "perrout"; + resets = <&cpg R9A07G044_WDT0_PRESETN>; + power-domains = <&cpg>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/renesas,rzn1-wdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,rzn1-wdt.yaml new file mode 100644 index 000000000000..7e3ee533cd56 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/renesas,rzn1-wdt.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/renesas,rzn1-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/N1 Watchdog Timer (WDT) Controller + +maintainers: + - Wolfram Sang <wsa+renesas@sang-engineering.com> + +properties: + compatible: + items: + - const: renesas,r9a06g032-wdt # RZ/N1D + - const: renesas,rzn1-wdt # RZ/N1 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + timeout-sec: true + +required: + - compatible + - reg + - interrupts + - clocks + +allOf: + - $ref: watchdog.yaml# + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r9a06g032-sysctrl.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + watchdog@40008000 { + compatible = "renesas,r9a06g032-wdt", "renesas,rzn1-wdt"; + reg = <0x40008000 0x1000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; + clocks = <&sysctrl R9A06G032_CLK_WATCHDOG>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml index b6e60162c263..7aebc5a5cf17 100644 --- a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml @@ -15,30 +15,6 @@ properties: oneOf: - items: - enum: - - renesas,r7s72100-wdt # RZ/A1 - - renesas,r7s9210-wdt # RZ/A2 - - const: renesas,rza-wdt # RZ/A - - - items: - - enum: - - renesas,r9a06g032-wdt # RZ/N1D - - const: renesas,rzn1-wdt # RZ/N1 - - - items: - - enum: - - renesas,r9a07g043-wdt # RZ/G2UL and RZ/Five - - renesas,r9a07g044-wdt # RZ/G2{L,LC} - - renesas,r9a07g054-wdt # RZ/V2L - - renesas,r9a08g045-wdt # RZ/G3S - - const: renesas,rzg2l-wdt - - - items: - - enum: - - renesas,r9a09g011-wdt # RZ/V2M - - const: renesas,rzv2m-wdt # RZ/V2M - - - items: - - enum: - renesas,r8a7742-wdt # RZ/G1H - renesas,r8a7743-wdt # RZ/G1M - renesas,r8a7744-wdt # RZ/G1N @@ -75,47 +51,14 @@ properties: - renesas,r8a779h0-wdt # R-Car V4M - const: renesas,rcar-gen4-wdt # R-Car Gen4 - - items: - - enum: - - renesas,r9a09g047-wdt # RZ/G3E - - renesas,r9a09g056-wdt # RZ/V2N - - const: renesas,r9a09g057-wdt # RZ/V2H(P) - - - enum: - - renesas,r9a09g057-wdt # RZ/V2H(P) - - renesas,r9a09g077-wdt # RZ/T2H - - - items: - - const: renesas,r9a09g087-wdt # RZ/N2H - - const: renesas,r9a09g077-wdt # RZ/T2H - reg: - minItems: 1 - maxItems: 2 + maxItems: 1 interrupts: - minItems: 1 - items: - - description: Timeout - - description: Parity error - - interrupt-names: - minItems: 1 - items: - - const: wdt - - const: perrout + maxItems: 1 clocks: - minItems: 1 - items: - - description: Register access clock - - description: Main clock - - clock-names: - minItems: 1 - items: - - const: pclk - - const: oscclk + maxItems: 1 power-domains: maxItems: 1 @@ -129,6 +72,8 @@ required: - compatible - reg - clocks + - interrupts + - power-domains allOf: - $ref: watchdog.yaml# @@ -138,90 +83,11 @@ allOf: properties: compatible: contains: - enum: - - renesas,r9a09g077-wdt - - renesas,rza-wdt - - renesas,rzn1-wdt + const: renesas,r8a77980-wdt then: required: - - power-domains - resets - - if: - properties: - compatible: - contains: - enum: - - renesas,r9a09g057-wdt - - renesas,rzg2l-wdt - - renesas,rzv2m-wdt - then: - properties: - clocks: - minItems: 2 - clock-names: - minItems: 2 - required: - - clock-names - else: - properties: - clocks: - maxItems: 1 - - - if: - properties: - compatible: - contains: - enum: - - renesas,rzg2l-wdt - then: - properties: - interrupts: - minItems: 2 - interrupt-names: - minItems: 2 - required: - - interrupt-names - else: - properties: - interrupts: - maxItems: 1 - - - if: - properties: - compatible: - contains: - enum: - - renesas,r9a09g057-wdt - - renesas,r9a09g077-wdt - then: - properties: - interrupts: false - interrupt-names: false - else: - required: - - interrupts - - - if: - properties: - compatible: - contains: - const: renesas,r9a09g077-wdt - then: - properties: - resets: false - clock-names: - maxItems: 1 - reg: - minItems: 2 - required: - - clock-names - - power-domains - else: - properties: - reg: - maxItems: 1 - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml index ef088e0f6917..609e98cdaaff 100644 --- a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml @@ -28,6 +28,7 @@ properties: - rockchip,rk3328-wdt - rockchip,rk3368-wdt - rockchip,rk3399-wdt + - rockchip,rk3506-wdt - rockchip,rk3562-wdt - rockchip,rk3568-wdt - rockchip,rk3576-wdt diff --git a/Documentation/devicetree/bindings/watchdog/ti,omap2-wdt.yaml b/Documentation/devicetree/bindings/watchdog/ti,omap2-wdt.yaml new file mode 100644 index 000000000000..913b55222f29 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/ti,omap2-wdt.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/ti,omap2-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI OMAP Watchdog Timer Controller + +maintainers: + - Aaro Koskinen <aaro.koskinen@iki.fi> + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + oneOf: + - enum: + - ti,omap2-wdt + - ti,omap3-wdt + - items: + - enum: + - ti,am4372-wdt + - ti,omap4-wdt + - ti,omap5-wdt + - const: ti,omap3-wdt + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + ti,hwmods: + description: Name of the hardware module associated with the watchdog. + $ref: /schemas/types.yaml#/definitions/string + deprecated: true + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + watchdog@48314000 { + compatible = "ti,omap3-wdt"; + reg = <0x48314000 0x80>; + ti,hwmods = "wd_timer2"; + }; diff --git a/Documentation/devicetree/bindings/watchdog/watchdog.yaml b/Documentation/devicetree/bindings/watchdog/watchdog.yaml index f0a584af1223..77ac23516d6d 100644 --- a/Documentation/devicetree/bindings/watchdog/watchdog.yaml +++ b/Documentation/devicetree/bindings/watchdog/watchdog.yaml @@ -21,9 +21,10 @@ select: properties: $nodename: - pattern: "^(timer|watchdog)(@.*|-([0-9]|[1-9][0-9]+))?$" + pattern: "^(pmic|timer|watchdog)(@.*|-([0-9]|[1-9][0-9]+))?$" timeout-sec: + maxItems: 1 description: Contains the watchdog timeout in seconds. |