1 files changed, 182 insertions, 0 deletions
diff --git a/drivers/gpib/agilent_82357a/agilent_82357a.h b/drivers/gpib/agilent_82357a/agilent_82357a.h
new file mode 100644
index 000000000000..33ac558e5552
--- /dev/null
+++ b/drivers/gpib/agilent_82357a/agilent_82357a.h
@@ -0,0 +1,182 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/***************************************************************************
+ *   copyright            : (C) 2004 by Frank Mori Hess                    *
+ ***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/completion.h>
+#include <linux/usb.h>
+#include <linux/timer.h>
+#include <linux/compiler_attributes.h>
+#include "gpibP.h"
+#include "tms9914.h"
+
+enum usb_vendor_ids {
+	USB_VENDOR_ID_AGILENT = 0x0957
+};
+
+enum usb_device_ids {
+	USB_DEVICE_ID_AGILENT_82357A = 0x0107,
+	USB_DEVICE_ID_AGILENT_82357A_PREINIT = 0x0007,	// device id before firmware is loaded
+	USB_DEVICE_ID_AGILENT_82357B = 0x0718,		// device id before firmware is loaded
+	USB_DEVICE_ID_AGILENT_82357B_PREINIT = 0x0518,	// device id before firmware is loaded
+};
+
+enum endpoint_addresses {
+	AGILENT_82357_CONTROL_ENDPOINT = 0x0,
+	AGILENT_82357_BULK_IN_ENDPOINT = 0x2,
+	AGILENT_82357A_BULK_OUT_ENDPOINT = 0x4,
+	AGILENT_82357A_INTERRUPT_IN_ENDPOINT = 0x6,
+	AGILENT_82357B_BULK_OUT_ENDPOINT = 0x6,
+	AGILENT_82357B_INTERRUPT_IN_ENDPOINT = 0x8,
+};
+
+enum bulk_commands {
+	DATA_PIPE_CMD_WRITE = 0x1,
+	DATA_PIPE_CMD_READ = 0x3,
+	DATA_PIPE_CMD_WR_REGS = 0x4,
+	DATA_PIPE_CMD_RD_REGS = 0x5
+};
+
+enum agilent_82357a_read_flags {
+	ARF_END_ON_EOI = 0x1,
+	ARF_NO_ADDRESS = 0x2,
+	ARF_END_ON_EOS_CHAR = 0x4,
+	ARF_SPOLL = 0x8
+};
+
+enum agilent_82357a_trailing_read_flags {
+	ATRF_EOI = 0x1,
+	ATRF_ATN = 0x2,
+	ATRF_IFC = 0x4,
+	ATRF_EOS = 0x8,
+	ATRF_ABORT = 0x10,
+	ATRF_COUNT = 0x20,
+	ATRF_DEAD_BUS = 0x40,
+	ATRF_UNADDRESSED = 0x80
+};
+
+enum agilent_82357a_write_flags {
+	AWF_SEND_EOI = 0x1,
+	AWF_NO_FAST_TALKER_FIRST_BYTE = 0x2,
+	AWF_NO_FAST_TALKER = 0x4,
+	AWF_NO_ADDRESS = 0x8,
+	AWF_ATN = 0x10,
+	AWF_SEPARATE_HEADER = 0x80
+};
+
+enum agilent_82357a_interrupt_flag_bit_numbers {
+	AIF_SRQ_BN = 0,
+	AIF_WRITE_COMPLETE_BN = 1,
+	AIF_READ_COMPLETE_BN = 2,
+};
+
+enum agilent_82357_error_codes {
+	UGP_SUCCESS = 0,
+	UGP_ERR_INVALID_CMD = 1,
+	UGP_ERR_INVALID_PARAM = 2,
+	UGP_ERR_INVALID_REG = 3,
+	UGP_ERR_GPIB_READ = 4,
+	UGP_ERR_GPIB_WRITE = 5,
+	UGP_ERR_FLUSHING = 6,
+	UGP_ERR_FLUSHING_ALREADY = 7,
+	UGP_ERR_UNSUPPORTED = 8,
+	UGP_ERR_OTHER  = 9
+};
+
+enum agilent_82357_control_values {
+	XFER_ABORT = 0xa0,
+	XFER_STATUS = 0xb0,
+};
+
+enum xfer_status_bits {
+	XS_COMPLETED = 0x1,
+	XS_READ = 0x2,
+};
+
+enum xfer_status_completion_bits {
+	XSC_EOI = 0x1,
+	XSC_ATN = 0x2,
+	XSC_IFC = 0x4,
+	XSC_EOS = 0x8,
+	XSC_ABORT = 0x10,
+	XSC_COUNT = 0x20,
+	XSC_DEAD_BUS = 0x40,
+	XSC_BUS_NOT_ADDRESSED = 0x80
+};
+
+enum xfer_abort_type {
+	XA_FLUSH = 0x1
+};
+
+#define STATUS_DATA_LEN 8
+#define INTERRUPT_BUF_LEN 8
+
+struct agilent_82357a_urb_ctx {
+	struct completion complete;
+	unsigned timed_out : 1;
+};
+
+// struct which defines local data for each 82357 device
+struct agilent_82357a_priv {
+	struct usb_interface *bus_interface;
+	unsigned short eos_char;
+	unsigned short eos_mode;
+	unsigned short hw_control_bits;
+	unsigned long interrupt_flags;
+	struct urb *bulk_urb;
+	struct urb *interrupt_urb;
+	u8 *interrupt_buffer;
+	struct mutex bulk_transfer_lock;	// bulk transfer lock
+	struct mutex bulk_alloc_lock;		// bulk transfer allocation lock
+	struct mutex interrupt_alloc_lock;	// interrupt allocation lock
+	struct mutex control_alloc_lock;	// control message allocation lock
+	struct timer_list bulk_timer;
+	struct agilent_82357a_urb_ctx context;
+	unsigned int bulk_out_endpoint;
+	unsigned int interrupt_in_endpoint;
+	unsigned is_cic : 1;
+	unsigned ren_state : 1;
+};
+
+struct agilent_82357a_register_pairlet {
+	short address;
+	unsigned short value;
+};
+
+enum firmware_registers {
+	HW_CONTROL = 0xa,
+	LED_CONTROL = 0xb,
+	RESET_TO_POWERUP = 0xc,
+	PROTOCOL_CONTROL = 0xd,
+	FAST_TALKER_T1 = 0xe
+};
+
+enum hardware_control_bits {
+	NOT_TI_RESET = 0x1,
+	SYSTEM_CONTROLLER = 0x2,
+	NOT_PARALLEL_POLL = 0x4,
+	OSCILLATOR_5V_ON = 0x8,
+	OUTPUT_5V_ON = 0x20,
+	CPLD_3V_ON = 0x80,
+};
+
+enum led_control_bits {
+	FIRMWARE_LED_CONTROL = 0x1,
+	FAIL_LED_ON = 0x20,
+	READY_LED_ON = 0x40,
+	ACCESS_LED_ON = 0x80
+};
+
+enum reset_to_powerup_bits {
+	RESET_SPACEBALL = 0x1,	// wait 2 millisec after sending
+};
+
+enum protocol_control_bits {
+	WRITE_COMPLETE_INTERRUPT_EN = 0x1,
+};
+
+static const int agilent_82357a_control_request = 0x4;
+