diff options
Diffstat (limited to 'drivers/gpib/tnt4882/mite.c')
| -rw-r--r-- | drivers/gpib/tnt4882/mite.c | 133 |
1 files changed, 133 insertions, 0 deletions
diff --git a/drivers/gpib/tnt4882/mite.c b/drivers/gpib/tnt4882/mite.c new file mode 100644 index 000000000000..847b96f411bd --- /dev/null +++ b/drivers/gpib/tnt4882/mite.c @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* + * Hardware driver for NI Mite PCI interface chip, + * adapted from COMEDI + * + * Copyright (C) 1997-8 David A. Schleef + * Copyright (C) 2002 Frank Mori Hess + * + * The PCI-MIO E series driver was originally written by + * Tomasz Motylewski <...>, and ported to comedi by ds. + * + * References for specifications: + * + * 321747b.pdf Register Level Programmer Manual (obsolete) + * 321747c.pdf Register Level Programmer Manual (new) + * DAQ-STC reference manual + * + * Other possibly relevant info: + * + * 320517c.pdf User manual (obsolete) + * 320517f.pdf User manual (new) + * 320889a.pdf delete + * 320906c.pdf maximum signal ratings + * 321066a.pdf about 16x + * 321791a.pdf discontinuation of at-mio-16e-10 rev. c + * 321808a.pdf about at-mio-16e-10 rev P + * 321837a.pdf discontinuation of at-mio-16de-10 rev d + * 321838a.pdf about at-mio-16de-10 rev N + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/io.h> +#include <linux/slab.h> + +#include "mite.h" + +#define PCI_MITE_SIZE 4096 +#define PCI_DAQ_SIZE 4096 + +struct mite_struct *mite_devices; + +#define TOP_OF_PAGE(x) ((x) | (~(PAGE_MASK))) + +void mite_init(void) +{ + struct pci_dev *pcidev; + struct mite_struct *mite; + + for (pcidev = pci_get_device(PCI_VENDOR_ID_NATINST, PCI_ANY_ID, NULL); + pcidev; + pcidev = pci_get_device(PCI_VENDOR_ID_NATINST, PCI_ANY_ID, pcidev)) { + mite = kzalloc(sizeof(*mite), GFP_KERNEL); + if (!mite) + return; + + mite->pcidev = pcidev; + pci_dev_get(mite->pcidev); + mite->next = mite_devices; + mite_devices = mite; + } +} + +int mite_setup(struct mite_struct *mite) +{ + u32 addr; + + if (pci_enable_device(mite->pcidev)) { + pr_err("mite: error enabling mite.\n"); + return -EIO; + } + pci_set_master(mite->pcidev); + if (pci_request_regions(mite->pcidev, "mite")) { + pr_err("mite: failed to request mite io regions.\n"); + return -EIO; + } + addr = pci_resource_start(mite->pcidev, 0); + mite->mite_phys_addr = addr; + mite->mite_io_addr = ioremap(addr, pci_resource_len(mite->pcidev, 0)); + if (!mite->mite_io_addr) { + pr_err("mite: failed to remap mite io memory address.\n"); + return -ENOMEM; + } + addr = pci_resource_start(mite->pcidev, 1); + mite->daq_phys_addr = addr; + mite->daq_io_addr = ioremap(mite->daq_phys_addr, pci_resource_len(mite->pcidev, 1)); + if (!mite->daq_io_addr) { + pr_err("mite: failed to remap daq io memory address.\n"); + return -ENOMEM; + } + writel(mite->daq_phys_addr | WENAB, mite->mite_io_addr + MITE_IODWBSR); + mite->used = 1; + return 0; +} + +void mite_cleanup(void) +{ + struct mite_struct *mite, *next; + + for (mite = mite_devices; mite; mite = next) { + next = mite->next; + if (mite->pcidev) + pci_dev_put(mite->pcidev); + kfree(mite); + } +} + +void mite_unsetup(struct mite_struct *mite) +{ + if (!mite) + return; + if (mite->mite_io_addr) { + iounmap(mite->mite_io_addr); + mite->mite_io_addr = NULL; + } + if (mite->daq_io_addr) { + iounmap(mite->daq_io_addr); + mite->daq_io_addr = NULL; + } + if (mite->mite_phys_addr) { + pci_release_regions(mite->pcidev); + pci_disable_device(mite->pcidev); + mite->mite_phys_addr = 0; + } + mite->used = 0; +} |