diff options
Diffstat (limited to 'include/uapi/linux/nl80211.h')
| -rw-r--r-- | include/uapi/linux/nl80211.h | 107 |
1 files changed, 104 insertions, 3 deletions
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 8433bac48112..b63f71850906 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -11,7 +11,7 @@ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> * Copyright 2008 Colin McCabe <colin@cozybit.com> * Copyright 2015-2017 Intel Deutschland GmbH - * Copyright (C) 2018-2025 Intel Corporation + * Copyright (C) 2018-2026 Intel Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -2974,6 +2974,16 @@ enum nl80211_commands { * primary channel is 2 MHz wide, and the control channel designates * the 1 MHz primary subchannel within that 2 MHz primary. * + * @NL80211_ATTR_EPP_PEER: A flag attribute to indicate if the peer is an EPP + * STA. Used with %NL80211_CMD_NEW_STA and %NL80211_CMD_ADD_LINK_STA + * + * @NL80211_ATTR_UHR_CAPABILITY: UHR Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION). Can be set + * only if HE/EHT are also available. + * @NL80211_ATTR_DISABLE_UHR: Force UHR capable interfaces to disable + * this feature during association. This is a flag attribute. + * Currently only supported in mac80211 drivers. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3542,6 +3552,11 @@ enum nl80211_attrs { NL80211_ATTR_S1G_PRIMARY_2MHZ, + NL80211_ATTR_EPP_PEER, + + NL80211_ATTR_UHR_CAPABILITY, + NL80211_ATTR_DISABLE_UHR, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3894,6 +3909,12 @@ enum nl80211_eht_ru_alloc { * @NL80211_RATE_INFO_4_MHZ_WIDTH: 4 MHz S1G rate * @NL80211_RATE_INFO_8_MHZ_WIDTH: 8 MHz S1G rate * @NL80211_RATE_INFO_16_MHZ_WIDTH: 16 MHz S1G rate + * @NL80211_RATE_INFO_UHR_MCS: UHR MCS index (u8, 0-15, 17, 19, 20, 23) + * Note that the other EHT attributes (such as @NL80211_RATE_INFO_EHT_NSS) + * are used in conjunction with this where applicable + * @NL80211_RATE_INFO_UHR_ELR: UHR ELR flag, which restricts NSS to 1, + * MCS to 0 or 1, and GI to %NL80211_RATE_INFO_EHT_GI_1_6. + * @NL80211_RATE_INFO_UHR_IM: UHR Interference Mitigation flag * @__NL80211_RATE_INFO_AFTER_LAST: internal use */ enum nl80211_rate_info { @@ -3927,6 +3948,9 @@ enum nl80211_rate_info { NL80211_RATE_INFO_4_MHZ_WIDTH, NL80211_RATE_INFO_8_MHZ_WIDTH, NL80211_RATE_INFO_16_MHZ_WIDTH, + NL80211_RATE_INFO_UHR_MCS, + NL80211_RATE_INFO_UHR_ELR, + NL80211_RATE_INFO_UHR_IM, /* keep last */ __NL80211_RATE_INFO_AFTER_LAST, @@ -4249,6 +4273,10 @@ enum nl80211_mpath_info { * capabilities element * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE: EHT PPE thresholds information as * defined in EHT capabilities element + * @NL80211_BAND_IFTYPE_ATTR_UHR_CAP_MAC: UHR MAC capabilities as in UHR + * capabilities element + * @NL80211_BAND_IFTYPE_ATTR_UHR_CAP_PHY: UHR PHY capabilities as in UHR + * capabilities element * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band attribute currently defined */ @@ -4266,6 +4294,8 @@ enum nl80211_band_iftype_attr { NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY, NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET, NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE, + NL80211_BAND_IFTYPE_ATTR_UHR_CAP_MAC, + NL80211_BAND_IFTYPE_ATTR_UHR_CAP_PHY, /* keep last */ __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, @@ -4445,6 +4475,11 @@ enum nl80211_wmm_rule { * channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_NO_16MHZ: 16 MHz operation is not allowed on this * channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_S1G_NO_PRIMARY: Channel is not permitted for use + * as a primary channel. Does not prevent the channel from existing + * as a non-primary subchannel. Only applicable to S1G channels. + * @NL80211_FREQUENCY_ATTR_NO_UHR: UHR operation is not allowed on this channel + * in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -4493,6 +4528,8 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_4MHZ, NL80211_FREQUENCY_ATTR_NO_8MHZ, NL80211_FREQUENCY_ATTR_NO_16MHZ, + NL80211_FREQUENCY_ATTR_S1G_NO_PRIMARY, + NL80211_FREQUENCY_ATTR_NO_UHR, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -4706,6 +4743,7 @@ enum nl80211_sched_scan_match_attr { * despite NO_IR configuration. * @NL80211_RRF_ALLOW_20MHZ_ACTIVITY: Allow activity in 20 MHz bandwidth, * despite NO_IR configuration. + * @NL80211_RRF_NO_UHR: UHR operation not allowed */ enum nl80211_reg_rule_flags { NL80211_RRF_NO_OFDM = 1 << 0, @@ -4732,6 +4770,7 @@ enum nl80211_reg_rule_flags { NL80211_RRF_NO_6GHZ_AFC_CLIENT = 1 << 23, NL80211_RRF_ALLOW_6GHZ_VLP_AP = 1 << 24, NL80211_RRF_ALLOW_20MHZ_ACTIVITY = 1 << 25, + NL80211_RRF_NO_UHR = 1 << 26, }; #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR @@ -5426,6 +5465,7 @@ enum nl80211_bss_status { * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key + * @NL80211_AUTHTYPE_EPPKE: Enhanced Privacy Protection Key Exchange * @__NL80211_AUTHTYPE_NUM: internal * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by @@ -5441,6 +5481,7 @@ enum nl80211_auth_type { NL80211_AUTHTYPE_FILS_SK, NL80211_AUTHTYPE_FILS_SK_PFS, NL80211_AUTHTYPE_FILS_PK, + NL80211_AUTHTYPE_EPPKE, /* keep last */ __NL80211_AUTHTYPE_NUM, @@ -6745,6 +6786,15 @@ enum nl80211_feature_flags { * @NL80211_EXT_FEATURE_BEACON_RATE_EHT: Driver supports beacon rate * configuration (AP/mesh) with EHT rates. * + * @NL80211_EXT_FEATURE_EPPKE: Driver supports Enhanced Privacy Protection + * Key Exchange (EPPKE) with user space SME (NL80211_CMD_AUTHENTICATE) + * in non-AP STA mode. + * + * @NL80211_EXT_FEATURE_ASSOC_FRAME_ENCRYPTION: This specifies that the + * driver supports encryption of (Re)Association Request and Response + * frames in both non‑AP STA and AP mode as specified in + * "IEEE P802.11bi/D3.0, 12.16.6". + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -6821,6 +6871,8 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_DFS_CONCURRENT, NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT, NL80211_EXT_FEATURE_BEACON_RATE_EHT, + NL80211_EXT_FEATURE_EPPKE, + NL80211_EXT_FEATURE_ASSOC_FRAME_ENCRYPTION, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -7433,6 +7485,8 @@ enum nl80211_nan_band_conf_attributes { * address that can take values from 50-6F-9A-01-00-00 to * 50-6F-9A-01-FF-FF. This attribute is optional. If not present, * a random Cluster ID will be chosen. + * This attribute will be ignored in NL80211_CMD_CHANGE_NAN_CONFIG + * since after NAN was started, the cluster ID can no longer change. * @NL80211_NAN_CONF_EXTRA_ATTRS: Additional NAN attributes to be * published in the beacons. This is an optional byte array. * @NL80211_NAN_CONF_VENDOR_ELEMS: Vendor-specific elements that will @@ -7767,6 +7821,30 @@ enum nl80211_peer_measurement_attrs { * trigger based ranging measurement is supported * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating * if non-trigger-based ranging measurement is supported + * @NL80211_PMSR_FTM_CAPA_ATTR_6GHZ_SUPPORT: flag attribute indicating if + * ranging on the 6 GHz band is supported + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_TX_LTF_REP: u32 attribute indicating + * the maximum number of LTF repetitions the device can transmit in the + * preamble of the ranging NDP (zero means only one LTF, no repetitions) + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_RX_LTF_REP: u32 attribute indicating + * the maximum number of LTF repetitions the device can receive in the + * preamble of the ranging NDP (zero means only one LTF, no repetitions) + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_TX_STS: u32 attribute indicating + * the maximum number of space-time streams supported for ranging NDP TX + * (zero-based) + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_RX_STS: u32 attribute indicating + * the maximum number of space-time streams supported for ranging NDP RX + * (zero-based) + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_TX: u32 attribute indicating the + * maximum total number of LTFs the device can transmit. The total number + * of LTFs is (number of LTF repetitions) * (number of space-time streams). + * This limits the allowed combinations of LTF repetitions and STS. + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_RX: u32 attribute indicating the + * maximum total number of LTFs the device can receive. The total number + * of LTFs is (number of LTF repetitions) * (number of space-time streams). + * This limits the allowed combinations of LTF repetitions and STS. + * @NL80211_PMSR_FTM_CAPA_ATTR_RSTA_SUPPORT: flag attribute indicating the + * device supports operating as the RSTA in PMSR FTM request * * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number @@ -7784,6 +7862,14 @@ enum nl80211_peer_measurement_ftm_capa { NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST, NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED, NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED, + NL80211_PMSR_FTM_CAPA_ATTR_6GHZ_SUPPORT, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_TX_LTF_REP, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_RX_LTF_REP, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_TX_STS, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_RX_STS, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_TX, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_RX, + NL80211_PMSR_FTM_CAPA_ATTR_RSTA_SUPPORT, /* keep last */ NUM_NL80211_PMSR_FTM_CAPA_ATTR, @@ -7799,12 +7885,15 @@ enum nl80211_peer_measurement_ftm_capa { * &enum nl80211_preamble), optional for DMG (u32) * @NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP: number of bursts exponent as in * 802.11-2016 9.4.2.168 "Fine Timing Measurement Parameters element" - * (u8, 0-15, optional with default 15 i.e. "no preference") + * (u8, 0-15, optional with default 15 i.e. "no preference". No limit for + * non-EDCA ranging) * @NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD: interval between bursts in units * of 100ms (u16, optional with default 0) * @NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION: burst duration, as in 802.11-2016 * Table 9-257 "Burst Duration field encoding" (u8, 0-15, optional with - * default 15 i.e. "no preference") + * default 15 i.e. "no preference"). For non-EDCA ranging, this is the + * burst duration in milliseconds (optional with default 0, i.e. let the + * device decide). * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: number of successful FTM frames * requested per burst * (u8, 0-31, optional with default 0 i.e. "no preference") @@ -7833,6 +7922,14 @@ enum nl80211_peer_measurement_ftm_capa { * @NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR: optional. The BSS color of the * responder. Only valid if %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED * or %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED is set. + * @NL80211_PMSR_FTM_REQ_ATTR_RSTA: optional. Request to perform the measurement + * as the RSTA (flag). When set, the device is expected to dwell on the + * channel specified in %NL80211_PMSR_PEER_ATTR_CHAN until it receives the + * FTM request from the peer or the timeout specified by + * %NL80211_ATTR_TIMEOUT has expired. + * Only valid if %NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK is set (so the + * RSTA will have the measurement results to report back in the FTM + * response). * * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number @@ -7853,6 +7950,7 @@ enum nl80211_peer_measurement_ftm_req { NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED, NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK, NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR, + NL80211_PMSR_FTM_REQ_ATTR_RSTA, /* keep last */ NUM_NL80211_PMSR_FTM_REQ_ATTR, @@ -7937,6 +8035,8 @@ enum nl80211_peer_measurement_ftm_failure_reasons { * 9.4.2.22.1) starting with the Measurement Token, with Measurement * Type 11. * @NL80211_PMSR_FTM_RESP_ATTR_PAD: ignore, for u64/s64 padding only + * @NL80211_PMSR_FTM_RESP_ATTR_BURST_PERIOD: actual burst period used by + * the responder (similar to request, u16) * * @NUM_NL80211_PMSR_FTM_RESP_ATTR: internal * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number @@ -7965,6 +8065,7 @@ enum nl80211_peer_measurement_ftm_resp { NL80211_PMSR_FTM_RESP_ATTR_LCI, NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC, NL80211_PMSR_FTM_RESP_ATTR_PAD, + NL80211_PMSR_FTM_RESP_ATTR_BURST_PERIOD, /* keep last */ NUM_NL80211_PMSR_FTM_RESP_ATTR, |