summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-07-11Linux 6.3.13v6.3.13stable/6.3.yGreg Kroah-Hartman
Link: https://lore.kernel.org/r/20230709111451.101012554@linuxfoundation.org Link: https://lore.kernel.org/r/20230709202353.266998088@linuxfoundation.org Link: https://lore.kernel.org/r/20230710054619.475084489@linuxfoundation.org Tested-by: Chris Paterson (CIP) <chris.paterson2@renesas.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230710142227.965586663@linuxfoundation.org Tested-by: Ron Economos <re@w6rz.net> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-11blktrace: use inline function for blk_trace_remove() while blktrace is disabledYu Kuai
commit cbe7cff4a76bc749dd70264ca5cf924e2adf9296 upstream. If config is disabled, call blk_trace_remove() directly will trigger build warning, hence use inline function instead, prepare to fix blktrace debugfs entries leakage. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230610022003.2557284-2-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-11md/raid1-10: fix casting from randomized structure in raid1_submit_write()Yu Kuai
commit b5a99602b74bbfa655be509c615181dd95b0719e upstream. Following build error triggered while build with clang version 17.0.0 with W=1(this can't be reporduced with gcc 13.1.0): drivers/md/raid1-10.c:117:25: error: casting from randomized structure pointer type 'struct block_device *' to 'struct md_rdev *' 117 | struct md_rdev *rdev = (struct md_rdev *)bio->bi_bdev; | ^ Fix this by casting 'bio->bi_bdev' to 'void *', as it used to be. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306142042.fmjfmTF8-lkp@intel.com/ Fixes: 8295efbe68c0 ("md/raid1-10: factor out a helper to submit normal write") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230616012136.3047071-1-yukuai1@huaweicloud.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-11x86/efi: Make efi_set_virtual_address_map IBT safeThomas Gleixner
[ Upstream commit 0303c9729afc4094ef53e552b7b8cff7436028d6 ] Niklāvs reported a boot regression on an Alderlake machine and bisected it to commit 9df9d2f0471b ("init: Invoke arch_cpu_finalize_init() earlier"). By moving the invocation of arch_cpu_finalize_init() further down he identified that efi_enter_virtual_mode() is the function which causes the boot hang. The main difference of the earlier invocation is that the boot CPU is already fully initialized and mitigations and alternatives are applied. But the only really interesting change turned out to be IBT, which is now enabled before efi_enter_virtual_mode(). "ibt=off" on the kernel command line cured the problem. Inspection of the involved calls in efi_enter_virtual_mode() unearthed that efi_set_virtual_address_map() is the only place in the kernel which invokes an EFI call without the IBT safe wrapper. This went obviously unnoticed so far as IBT was enabled later. Use arch_efi_call_virt() instead of efi_call() to cure that. Fixes: fe379fa4d199 ("x86/ibt: Disable IBT around firmware") Fixes: 9df9d2f0471b ("init: Invoke arch_cpu_finalize_init() earlier") Reported-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217602 Link: https://lore.kernel.org/r/87jzvm12q0.ffs@tglx Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11arm64: sme: Use STR P to clear FFR context field in streaming SVE modeWill Deacon
[ Upstream commit 893b24181b4c4bf1fa2841b1ed192e5413a97cb1 ] The FFR is a predicate register which can vary between 16 and 256 bits in size depending upon the configured vector length. When saving the SVE state in streaming SVE mode, the FFR register is inaccessible and so commit 9f5848665788 ("arm64/sve: Make access to FFR optional") simply clears the FFR field of the in-memory context structure. Unfortunately, it achieves this using an unconditional 8-byte store and so if the SME vector length is anything other than 64 bytes in size we will either fail to clear the entire field or, worse, we will corrupt memory immediately following the structure. This has led to intermittent kfence splats in CI [1] and can trigger kmalloc Redzone corruption messages when running the 'fp-stress' kselftest: | ============================================================================= | BUG kmalloc-1k (Not tainted): kmalloc Redzone overwritten | ----------------------------------------------------------------------------- | | 0xffff000809bf1e22-0xffff000809bf1e27 @offset=7714. First byte 0x0 instead of 0xcc | Allocated in do_sme_acc+0x9c/0x220 age=2613 cpu=1 pid=531 | __kmalloc+0x8c/0xcc | do_sme_acc+0x9c/0x220 | ... Replace the 8-byte store with a store of a predicate register which has been zero-initialised with PFALSE, ensuring that the entire field is cleared in memory. [1] https://lore.kernel.org/r/CA+G9fYtU7HsV0R0dp4XEH5xXHSJFw8KyDf5VQrLLfMxWfxQkag@mail.gmail.com Cc: Mark Brown <broonie@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: 9f5848665788 ("arm64/sve: Make access to FFR optional") Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by: Will Deacon <will@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Link: https://lore.kernel.org/r/20230628155605.22296-1-will@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11ksmbd: avoid field overflow warningArnd Bergmann
[ Upstream commit 9cedc58bdbe9fff9aacd0ca19ee5777659f28fd7 ] clang warns about a possible field overflow in a memcpy: In file included from fs/smb/server/smb_common.c:7: include/linux/fortify-string.h:583:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning] __write_overflow_field(p_size_field, size); It appears to interpret the "&out[baselen + 4]" as referring to a single byte of the character array, while the equivalen "out + baselen + 4" is seen as an offset into the array. I don't see that kind of warning elsewhere, so just go with the simple rework. Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11smb: client: fix shared DFS root mounts with different prefixesPaulo Alcantara
[ Upstream commit 3ae872de410751fe5e629e04da491a632d95201c ] When having two DFS root mounts that are connected to same namespace, same mount options but different prefix paths, we can't really use the shared @server->origin_fullpath when chasing DFS links in them. Move the origin_fullpath field to cifs_tcon structure so when having shared DFS root mounts with different prefix paths, and we need to chase any DFS links, dfs_get_automount_devname() will pick up the correct full path out of the @tcon that will be used for the new mount. Before patch mount.cifs //dom/dfs/dir /mnt/1 -o ... mount.cifs //dom/dfs /mnt/2 -o ... # shared server, ses, tcon # server: origin_fullpath=//dom/dfs/dir # @server->origin_fullpath + '/dir/link1' $ ls /mnt/2/dir/link1 ls: cannot open directory '/mnt/2/dir/link1': No such file or directory After patch mount.cifs //dom/dfs/dir /mnt/1 -o ... mount.cifs //dom/dfs /mnt/2 -o ... # shared server & ses # tcon_1: origin_fullpath=//dom/dfs/dir # tcon_2: origin_fullpath=//dom/dfs # @tcon_2->origin_fullpath + '/dir/link1' $ ls /mnt/2/dir/link1 dir0 dir1 dir10 dir3 dir5 dir6 dir7 dir9 target2_file.txt tsub Fixes: 8e3554150d6c ("cifs: fix sharing of DFS connections") Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11smb: client: fix broken file attrs with nodfs mountsPaulo Alcantara
[ Upstream commit d439b29057e26464120fc6c18f97433aa003b5fe ] *_get_inode_info() functions expect -EREMOTE when query path info calls find a DFS link, regardless whether !CONFIG_CIFS_DFS_UPCALL or 'nodfs' mount option. Otherwise, those files will miss the fake DFS file attributes. Before patch $ mount.cifs //srv/dfs /mnt/1 -o ...,nodfs $ ls -l /mnt/1 ls: cannot access '/mnt/1/link': Operation not supported total 0 -rwxr-xr-x 1 root root 0 Jul 26 2022 dfstest2_file1.txt drwxr-xr-x 2 root root 0 Aug 8 2022 dir1 d????????? ? ? ? ? ? link After patch $ mount.cifs //srv/dfs /mnt/1 -o ...,nodfs $ ls -l /mnt/1 total 0 -rwxr-xr-x 1 root root 0 Jul 26 2022 dfstest2_file1.txt drwxr-xr-x 2 root root 0 Aug 8 2022 dir1 drwx--x--x 2 root root 0 Jun 26 20:29 link Fixes: c877ce47e137 ("cifs: reduce roundtrips on create/qinfo requests") Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11cifs: do all necessary checks for credits within or before lockingShyam Prasad N
[ Upstream commit 326a8d04f147e2bf393f6f9cdb74126ee6900607 ] All the server credits and in-flight info is protected by req_lock. Once the req_lock is held, and we've determined that we have enough credits to continue, this lock cannot be dropped till we've made the changes to credits and in-flight count. However, we used to drop the lock in order to avoid deadlock with the recent srv_lock. This could cause the checks already made to be invalidated. Fixed it by moving the server status check to before locking req_lock. Fixes: d7d7a66aacd6 ("cifs: avoid use of global locks for high contention data") Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11cifs: prevent use-after-free by freeing the cfile laterShyam Prasad N
[ Upstream commit 33f736187d08f6bc822117629f263b97d3df4165 ] In smb2_compound_op we have a possible use-after-free which can cause hard to debug problems later on. This was revealed during stress testing with KASAN enabled kernel. Fixing it by moving the cfile free call to a few lines below, after the usage. Fixes: 76894f3e2f71 ("cifs: improve symlink handling for smb2+") Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11efi/libstub: Disable PCI DMA before grabbing the EFI memory mapArd Biesheuvel
[ Upstream commit 2e28a798c3092ea42b968fa16ac835969d124898 ] Currently, the EFI stub will disable PCI DMA as the very last thing it does before calling ExitBootServices(), to avoid interfering with the firmware's normal operation as much as possible. However, the stub will invoke DisconnectController() on all endpoints downstream of the PCI bridges it disables, and this may affect the layout of the EFI memory map, making it substantially more likely that ExitBootServices() will fail the first time around, and that the EFI memory map needs to be reloaded. This, in turn, increases the likelihood that the slack space we allocated is insufficient (and we can no longer allocate memory via boot services after having called ExitBootServices() once), causing the second call to GetMemoryMap (and therefore the boot) to fail. This makes the PCI DMA disable feature a bit more fragile than it already is, so let's make it more robust, by allocating the space for the EFI memory map after disabling PCI DMA. Fixes: 4444f8541dad16fe ("efi: Allow disabling PCI busmastering on bridges during boot") Reported-by: Glenn Washburn <development@efficientek.com> Acked-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11kbuild: deb-pkg: remove the CONFIG_MODULES check in buildebMasahiro Yamada
[ Upstream commit 1240dabe8d58b4eff09e7edf1560da0360f997aa ] When CONFIG_MODULES is disabled for ARCH=um, 'make (bin)deb-pkg' fails with an error like follows: cp: cannot create regular file 'debian/linux-image/usr/lib/uml/modules/6.4.0-rc2+/System.map': No such file or directory Remove the CONFIG_MODULES check completely so ${pdir}/usr/lib/uml/modules will always be created and modules.builtin.(modinfo) will be installed under it for ARCH=um. Fixes: b611daae5efc ("kbuild: deb-pkg: split image and debug objects staging out into functions") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11kbuild: builddeb: always make modules_install, to install modules.builtin*Josh Triplett
[ Upstream commit 4243afdb932677a03770753be8c54b3190a512e8 ] Even for a non-modular kernel, the kernel builds modules.builtin and modules.builtin.modinfo, with information about the built-in modules. Tools such as initramfs-tools need these files to build a working initramfs on some systems, such as those requiring firmware. Now that `make modules_install` works even in non-modular kernels and installs these files, unconditionally invoke it when building a Debian package. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Stable-dep-of: 1240dabe8d58 ("kbuild: deb-pkg: remove the CONFIG_MODULES check in buildeb") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11cxl/region: Fix state transitions after reset failureDan Williams
[ Upstream commit adfe19738b71a893da62cb2e30bd6bdb4299ea67 ] Jonathan reports that failed attempts to reset a region (teardown its HDM decoder configuration) mistakenly advance the state of the region to "not committed". Revert to the previous state of the region on reset failure so that the reset can be re-attempted. Reported-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com> Closes: http://lore.kernel.org/r/20230316171441.0000205b@Huawei.com Fixes: 176baefb2eb5 ("cxl/hdm: Commit decoder state to hardware") Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/168696507968.3590522.14484000711718573626.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11cxl/region: Flag partially torn down regions as unusableDan Williams
[ Upstream commit 2ab47045ac96a605e3037d479a7d5854570ee5bf ] cxl_region_decode_reset() walks all the decoders associated with a given region and disables them. Due to decoder ordering rules it is possible that a switch in the topology notices that a given decoder can not be shutdown before another region with a higher HPA is shutdown first. That can leave the region in a partially committed state. Capture that state in a new CXL_REGION_F_NEEDS_RESET flag and require that a successful cxl_region_decode_reset() attempt must be completed before cxl_region_probe() accepts the region. This is a corollary for the bug that Jonathan identified in "CXL/region : commit reset of out of order region appears to succeed." [1]. Cc: Jonathan Cameron <Jonathan.Cameron@Huawei.com> Link: http://lore.kernel.org/r/20230316171441.0000205b@Huawei.com [1] Fixes: 176baefb2eb5 ("cxl/hdm: Commit decoder state to hardware") Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/168696507423.3590522.16254212607926684429.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11cxl/region: Move cache invalidation before region teardown, and before setupDan Williams
[ Upstream commit d1257d098a5a38753a0736a50db0a26a62377ad7 ] Vikram raised a concern with the theoretical case of a CPU sending MemClnEvict to a device that is not prepared to receive. MemClnEvict is a message that is sent after a CPU has taken ownership of a cacheline from accelerator memory (HDM-DB). In the case of hotplug or HDM decoder reconfiguration it is possible that the CPU is holding old contents for a new device that has taken over the physical address range being cached by the CPU. To avoid this scenario, invalidate caches prior to tearing down an HDM decoder configuration. Now, this poses another problem that it is possible for something to speculate into that space while the decode configuration is still up, so to close that gap also invalidate prior to establish new contents behind a given physical address range. With this change the cache invalidation is now explicit and need not be checked in cxl_region_probe(), and that obviates the need for CXL_REGION_F_INCOHERENT. Cc: Jonathan Cameron <Jonathan.Cameron@Huawei.com> Fixes: d18bc74aced6 ("cxl/region: Manage CPU caches relative to DPA invalidation events") Reported-by: Vikram Sethi <vsethi@nvidia.com> Closes: http://lore.kernel.org/r/BYAPR12MB33364B5EB908BF7239BB996BBD53A@BYAPR12MB3336.namprd12.prod.outlook.com Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/168696506886.3590522.4597053660991916591.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11kbuild: Disable GCOV for *.mod.oSami Tolvanen
[ Upstream commit 25a21fbb934a0d989e1858f83c2ddf4cfb2ebe30 ] With GCOV_PROFILE_ALL, Clang injects __llvm_gcov_* functions to each object file, including the *.mod.o. As we filter out CC_FLAGS_CFI for *.mod.o, the compiler won't generate type hashes for the injected functions, and therefore indirectly calling them during module loading trips indirect call checking. Enabling CFI for *.mod.o isn't sufficient to fix this issue after commit 0c3e806ec0f9 ("x86/cfi: Add boot time hash randomization"), as *.mod.o aren't processed by objtool, which means any hashes emitted there won't be randomized. Therefore, in addition to disabling CFI for *.mod.o, also disable GCOV, as the object files don't otherwise contain any executable code. Fixes: cf68fffb66d6 ("add support for Clang CFI") Reported-by: Joe Fradley <joefradley@google.com> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11kbuild: Fix CFI failures with GCOVSami Tolvanen
[ Upstream commit ddf56288eebd1fe82c46fc9f693b5b18045cddb6 ] With GCOV_PROFILE_ALL, Clang injects __llvm_gcov_* functions to each object file, and the functions are indirectly called during boot. However, when code is injected to object files that are not part of vmlinux.o, it's also not processed by objtool, which breaks CFI hash randomization as the hashes in these files won't be included in the .cfi_sites section and thus won't be randomized. Similarly to commit 42633ed852de ("kbuild: Fix CFI hash randomization with KASAN"), disable GCOV for .vmlinux.export.o and init/version-timestamp.o to avoid emitting unnecessary functions to object files that don't otherwise have executable code. Fixes: 0c3e806ec0f9 ("x86/cfi: Add boot time hash randomization") Reported-by: Joe Fradley <joefradley@google.com> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11hwrng: st - keep clock enabled while hwrng is registeredMartin Kaiser
[ Upstream commit 501e197a02d4aef157f53ba3a0b9049c3e52fedc ] The st-rng driver uses devres to register itself with the hwrng core, the driver will be unregistered from hwrng when its device goes out of scope. This happens after the driver's remove function is called. However, st-rng's clock is disabled in the remove function. There's a short timeframe where st-rng is still registered with the hwrng core although its clock is disabled. I suppose the clock must be active to access the hardware and serve requests from the hwrng core. Switch to devm_clk_get_enabled and let devres disable the clock and unregister the hwrng. This avoids the race condition. Fixes: 3e75241be808 ("hwrng: drivers - Use device-managed registration API") Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11dax/kmem: Pass valid argument to memory_group_register_staticTarun Sahu
[ Upstream commit 46e66dab8565f742374e9cc4ff7d35f344d774e2 ] memory_group_register_static takes maximum number of pages as the argument while dev_dax_kmem_probe passes total_len (in bytes) as the argument. IIUC, I don't see any crash/panic impact as such. As, memory_group_register_static just set the max_pages limit which is used in auto_movable_zone_for_pfn to determine the zone. which might cause these condition to behave differently, This will be true always so jump will happen to kernel_zone ... if (!auto_movable_can_online_movable(NUMA_NO_NODE, group, nr_pages)) goto kernel_zone; ... kernel_zone: return default_kernel_zone_for_pfn(nid, pfn, nr_pages); Here, In below, zone_intersects compare range will be larger as nr_pages will be higher (derived from total_len passed in dev_dax_kmem_probe). ... static struct zone *default_kernel_zone_for_pfn(int nid, unsigned long start_pfn, unsigned long nr_pages) { struct pglist_data *pgdat = NODE_DATA(nid); int zid; for (zid = 0; zid < ZONE_NORMAL; zid++) { struct zone *zone = &pgdat->node_zones[zid]; if (zone_intersects(zone, start_pfn, nr_pages)) return zone; } return &pgdat->node_zones[ZONE_NORMAL]; } Incorrect zone will be returned here, which in later time might cause bigger problem. Fixes: eedf634aac3b ("dax/kmem: use a single static memory group for a single probed unit") Signed-off-by: Tarun Sahu <tsahu@linux.ibm.com> Link: https://lore.kernel.org/r/20230621155025.370672-1-tsahu@linux.ibm.com Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11dax: Introduce alloc_dev_dax_id()Dan Williams
[ Upstream commit 70aab281e18c68a1284bc387de127c2fc0bed3f8 ] The reference counting of dax_region objects is needlessly complicated, has lead to confusion [1], and has hidden a bug [2]. Towards cleaning up that mess introduce alloc_dev_dax_id() to minimize the holding of a dax_region reference to only what dev_dax_release() needs, the dax_region->ida. Part of the reason for the mess was the design to dereference a dax_region in all cases in free_dev_dax_id() even if the id was statically assigned by the upper level dax_region driver. Remove the need to call "is_static(dax_region)" by tracking whether the id is dynamic directly in the dev_dax instance itself. With that flag the dax_region pinning and release per dev_dax instance can move to alloc_dev_dax_id() and free_dev_dax_id() respectively. A follow-on cleanup address the unnecessary references in the dax_region setup and drivers. Fixes: 0f3da14a4f05 ("device-dax: introduce 'seed' devices") Link: http://lore.kernel.org/r/20221203095858.612027-1-liuyongqiang13@huawei.com [1] Link: http://lore.kernel.org/r/3cf0890b-4eb0-e70e-cd9c-2ecc3d496263@hpe.com [2] Reported-by: Yongqiang Liu <liuyongqiang13@huawei.com> Reported-by: Paul Cassella <cassella@hpe.com> Reported-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/168577284563.1672036.13493034988900989554.stgit@dwillia2-xfh.jf.intel.com Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11dax: Fix dax_mapping_release() use after freeDan Williams
[ Upstream commit 6d24b170a9db0456f577b1ab01226a2254c016a8 ] A CONFIG_DEBUG_KOBJECT_RELEASE test of removing a device-dax region provider (like modprobe -r dax_hmem) yields: kobject: 'mapping0' (ffff93eb460e8800): kobject_release, parent 0000000000000000 (delayed 2000) [..] DEBUG_LOCKS_WARN_ON(1) WARNING: CPU: 23 PID: 282 at kernel/locking/lockdep.c:232 __lock_acquire+0x9fc/0x2260 [..] RIP: 0010:__lock_acquire+0x9fc/0x2260 [..] Call Trace: <TASK> [..] lock_acquire+0xd4/0x2c0 ? ida_free+0x62/0x130 _raw_spin_lock_irqsave+0x47/0x70 ? ida_free+0x62/0x130 ida_free+0x62/0x130 dax_mapping_release+0x1f/0x30 device_release+0x36/0x90 kobject_delayed_cleanup+0x46/0x150 Due to attempting ida_free() on an ida object that has already been freed. Devices typically only hold a reference on their parent while registered. If a child needs a parent object to complete its release it needs to hold a reference that it drops from its release callback. Arrange for a dax_mapping to pin its parent dev_dax instance until dax_mapping_release(). Fixes: 0b07ce872a9e ("device-dax: introduce 'mapping' devices") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/168577283412.1672036.16111545266174261446.stgit@dwillia2-xfh.jf.intel.com Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11SMB3: Do not send lease break acknowledgment if all file handles have been ↵Bharath SM
closed [ Upstream commit da787d5b74983f7525d1eb4b9c0b4aff2821511a ] In case if all existing file handles are deferred handles and if all of them gets closed due to handle lease break then we dont need to send lease break acknowledgment to server, because last handle close will be considered as lease break ack. After closing deferred handels, we check for openfile list of inode, if its empty then we skip sending lease break ack. Fixes: 59a556aebc43 ("SMB3: drop reference to cfile before sending oplock break") Reviewed-by: Tom Talpey <tom@talpey.com> Signed-off-by: Bharath SM <bharathsm@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11NFSv4.1: freeze the session table upon receiving NFS4ERR_BADSESSIONOlga Kornievskaia
[ Upstream commit c907e72f58ed979a24a9fdcadfbc447c51d5e509 ] When the client received NFS4ERR_BADSESSION, it schedules recovery and start the state manager thread which in turn freezes the session table and does not allow for any new requests to use the no-longer valid session. However, it is possible that before the state manager thread runs, a new operation would use the released slot that received BADSESSION and was therefore not updated its sequence number. Such re-use of the slot can lead the application errors. Fixes: 5c441544f045 ("NFSv4.x: Handle bad/dead sessions correctly in nfs41_sequence_process()") Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11NFSv4.2: fix wrong shrinker_idQi Zheng
[ Upstream commit 7f7ab336898f281e58540ef781a8fb375acc32a9 ] Currently, the list_lru::shrinker_id corresponding to the nfs4_xattr shrinkers is wrong: >>> prog["nfs4_xattr_cache_lru"].shrinker_id (int)0 >>> prog["nfs4_xattr_entry_lru"].shrinker_id (int)0 >>> prog["nfs4_xattr_large_entry_lru"].shrinker_id (int)0 >>> prog["nfs4_xattr_cache_shrinker"].id (int)18 >>> prog["nfs4_xattr_entry_shrinker"].id (int)19 >>> prog["nfs4_xattr_large_entry_shrinker"].id (int)20 This is not what we expect, which will cause these shrinkers not to be found in shrink_slab_memcg(). We should assign shrinker::id before calling list_lru_init_memcg(), so that the corresponding list_lru::shrinker_id will be assigned the correct value like below: >>> prog["nfs4_xattr_cache_lru"].shrinker_id (int)16 >>> prog["nfs4_xattr_entry_lru"].shrinker_id (int)17 >>> prog["nfs4_xattr_large_entry_lru"].shrinker_id (int)18 >>> prog["nfs4_xattr_cache_shrinker"].id (int)16 >>> prog["nfs4_xattr_entry_shrinker"].id (int)17 >>> prog["nfs4_xattr_large_entry_shrinker"].id (int)18 So just do it. Fixes: 95ad37f90c33 ("NFSv4.2: add client side xattr caching.") Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11crypto: qat - unmap buffers before free for RSAHareshx Sankar Raj
[ Upstream commit d776b25495f2c71b9dbf1f5e53b642215ba72f3c ] The callback function for RSA frees the memory allocated for the source and destination buffers before unmapping them. This sequence is wrong. Change the cleanup sequence to unmap the buffers before freeing them. Fixes: 3dfaf0071ed7 ("crypto: qat - remove dma_free_coherent() for RSA") Signed-off-by: Hareshx Sankar Raj <hareshx.sankar.raj@intel.com> Co-developed-by: Bolemx Sivanagaleela <bolemx.sivanagaleela@intel.com> Signed-off-by: Bolemx Sivanagaleela <bolemx.sivanagaleela@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11crypto: qat - unmap buffer before free for DHHareshx Sankar Raj
[ Upstream commit eb7713f5ca97697b92f225127440d1525119b8de ] The callback function for DH frees the memory allocated for the destination buffer before unmapping it. This sequence is wrong. Change the cleanup sequence to unmap the buffer before freeing it. Fixes: 029aa4624a7f ("crypto: qat - remove dma_free_coherent() for DH") Signed-off-by: Hareshx Sankar Raj <hareshx.sankar.raj@intel.com> Co-developed-by: Bolemx Sivanagaleela <bolemx.sivanagaleela@intel.com> Signed-off-by: Bolemx Sivanagaleela <bolemx.sivanagaleela@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11ARC: define ASM_NL and __ALIGN(_STR) outside #ifdef __ASSEMBLY__ guardMasahiro Yamada
[ Upstream commit 92e2921eeafdfca9acd9b83f07d2b7ca099bac24 ] ASM_NL is useful not only in *.S files but also in .c files for using inline assembler in C code. On ARC, however, ASM_NL is evaluated inconsistently. It is expanded to a backquote (`) in *.S files, but a semicolon (;) in *.c files because arch/arc/include/asm/linkage.h defines it inside #ifdef __ASSEMBLY__, so the definition for C code falls back to the default value defined in include/linux/linkage.h. If ASM_NL is used in inline assembler in .c files, it will result in wrong assembly code because a semicolon is not an instruction separator, but the start of a comment for ARC. Move ASM_NL (also __ALIGN and __ALIGN_STR) out of the #ifdef. Fixes: 9df62f054406 ("arch: use ASM_NL instead of ';' for assembler new line character in the macro") Fixes: 8d92e992a785 ("ARC: define __ALIGN_STR and __ALIGN symbols for ARC") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11modpost: fix off by one in is_executable_section()Dan Carpenter
[ Upstream commit 3a3f1e573a105328a2cca45a7cfbebabbf5e3192 ] The > comparison should be >= to prevent an out of bounds array access. Fixes: 52dc0595d540 ("modpost: handle relocations mismatch in __ex_table.") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11crypto: jitter - correct health test during initializationStephan Müller
[ Upstream commit d23659769ad1bf2cbafaa0efcbae20ef1a74f77e ] With the update of the permanent and intermittent health errors, the actual indicator for the health test indicates a potential error only for the one offending time stamp gathered in the current iteration round. The next iteration round will "overwrite" the health test result. Thus, the entropy collection loop in jent_gen_entropy checks for the health test failure upon each loop iteration. However, the initialization operation checked for the APT health test once for an APT window which implies it would not catch most errors. Thus, the check for all health errors is now invoked unconditionally during each loop iteration for the startup test. With the change, the error JENT_ERCT becomes unused as all health errors are only reported with the JENT_HEALTH return code. This allows the removal of the error indicator. Fixes: 3fde2fe99aa6 ("crypto: jitter - permanent and intermittent health errors" ) Reported-by: Joachim Vandersmissen <git@jvdsn.com> Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11crypto: marvell/cesa - Fix type mismatch warningArnd Bergmann
[ Upstream commit efbc7764c4446566edb76ca05e903b5905673d2e ] Commit df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3") uncovered a type mismatch in cesa 3des support that leads to a memcpy beyond the end of a structure: In function 'fortify_memcpy_chk', inlined from 'mv_cesa_des3_ede_setkey' at drivers/crypto/marvell/cesa/cipher.c:307:2: include/linux/fortify-string.h:583:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] 583 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This is probably harmless as the actual data that is copied has the correct type, but clearly worth fixing nonetheless. Fixes: 4ada48397823 ("crypto: marvell/cesa - add Triple-DES support") Cc: Kees Cook <keescook@chromium.org> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11modpost: fix section mismatch message for R_ARM_{PC24,CALL,JUMP24}Masahiro Yamada
[ Upstream commit 56a24b8ce6a7f9c4a21b2276a8644f6f3d8fc14d ] addend_arm_rel() processes R_ARM_PC24, R_ARM_CALL, R_ARM_JUMP24 in a wrong way. Here, test code. [test code for R_ARM_JUMP24] .section .init.text,"ax" bar: bx lr .section .text,"ax" .globl foo foo: b bar [test code for R_ARM_CALL] .section .init.text,"ax" bar: bx lr .section .text,"ax" .globl foo foo: push {lr} bl bar pop {pc} If you compile it with ARM multi_v7_defconfig, modpost will show the symbol name, (unknown). WARNING: modpost: vmlinux.o: section mismatch in reference: foo (section: .text) -> (unknown) (section: .init.text) (You need to use GNU linker instead of LLD to reproduce it.) Fix the code to make modpost show the correct symbol name. I imported (with adjustment) sign_extend32() from include/linux/bitops.h. The '+8' is the compensation for pc-relative instruction. It is documented in "ELF for the Arm Architecture" [1]. "If the relocation is pc-relative then compensation for the PC bias (the PC value is 8 bytes ahead of the executing instruction in Arm state and 4 bytes in Thumb state) must be encoded in the relocation by the object producer." [1]: https://github.com/ARM-software/abi-aa/blob/main/aaelf32/aaelf32.rst Fixes: 56a974fa2d59 ("kbuild: make better section mismatch reports on arm") Fixes: 6e2e340b59d2 ("ARM: 7324/1: modpost: Fix section warnings for ARM for many compilers") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11modpost: fix section mismatch message for R_ARM_ABS32Masahiro Yamada
[ Upstream commit b7c63520f6703a25eebb4f8138fed764fcae1c6f ] addend_arm_rel() processes R_ARM_ABS32 in a wrong way. Here, test code. [test code 1] #include <linux/init.h> int __initdata foo; int get_foo(void) { return foo; } If you compile it with ARM versatile_defconfig, modpost will show the symbol name, (unknown). WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> (unknown) (section: .init.data) (You need to use GNU linker instead of LLD to reproduce it.) If you compile it for other architectures, modpost will show the correct symbol name. WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> foo (section: .init.data) For R_ARM_ABS32, addend_arm_rel() sets r->r_addend to a wrong value. I just mimicked the code in arch/arm/kernel/module.c. However, there is more difficulty for ARM. Here, test code. [test code 2] #include <linux/init.h> int __initdata foo; int get_foo(void) { return foo; } int __initdata bar; int get_bar(void) { return bar; } With this commit applied, modpost will show the following messages for ARM versatile_defconfig: WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> foo (section: .init.data) WARNING: modpost: vmlinux.o: section mismatch in reference: get_bar (section: .text) -> foo (section: .init.data) The reference from 'get_bar' to 'foo' seems wrong. I have no solution for this because it is true in assembly level. In the following output, relocation at 0x1c is no longer associated with 'bar'. The two relocation entries point to the same symbol, and the offset to 'bar' is encoded in the instruction 'r0, [r3, #4]'. Disassembly of section .text: 00000000 <get_foo>: 0: e59f3004 ldr r3, [pc, #4] @ c <get_foo+0xc> 4: e5930000 ldr r0, [r3] 8: e12fff1e bx lr c: 00000000 .word 0x00000000 00000010 <get_bar>: 10: e59f3004 ldr r3, [pc, #4] @ 1c <get_bar+0xc> 14: e5930004 ldr r0, [r3, #4] 18: e12fff1e bx lr 1c: 00000000 .word 0x00000000 Relocation section '.rel.text' at offset 0x244 contains 2 entries: Offset Info Type Sym.Value Sym. Name 0000000c 00000c02 R_ARM_ABS32 00000000 .init.data 0000001c 00000c02 R_ARM_ABS32 00000000 .init.data When find_elf_symbol() gets into a situation where relsym->st_name is zero, there is no guarantee to get the symbol name as written in C. I am keeping the current logic because it is useful in many architectures, but the symbol name is not always correct depending on the optimization. I left some comments in find_tosym(). Fixes: 56a974fa2d59 ("kbuild: make better section mismatch reports on arm") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11crypto: nx - fix build warnings when DEBUG_FS is not enabledRandy Dunlap
[ Upstream commit b04b076fb56560b39d695ac3744db457e12278fd ] Fix build warnings when DEBUG_FS is not enabled by using an empty do-while loop instead of a value: In file included from ../drivers/crypto/nx/nx.c:27: ../drivers/crypto/nx/nx.c: In function 'nx_register_algs': ../drivers/crypto/nx/nx.h:173:33: warning: statement with no effect [-Wunused-value] 173 | #define NX_DEBUGFS_INIT(drv) (0) ../drivers/crypto/nx/nx.c:573:9: note: in expansion of macro 'NX_DEBUGFS_INIT' 573 | NX_DEBUGFS_INIT(&nx_driver); ../drivers/crypto/nx/nx.c: In function 'nx_remove': ../drivers/crypto/nx/nx.h:174:33: warning: statement with no effect [-Wunused-value] 174 | #define NX_DEBUGFS_FINI(drv) (0) ../drivers/crypto/nx/nx.c:793:17: note: in expansion of macro 'NX_DEBUGFS_FINI' 793 | NX_DEBUGFS_FINI(&nx_driver); Also, there is no need to build nx_debugfs.o when DEBUG_FS is not enabled, so change the Makefile to accommodate that. Fixes: ae0222b7289d ("powerpc/crypto: nx driver code supporting nx encryption") Fixes: aef7b31c8833 ("powerpc/crypto: Build files for the nx device driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Breno Leitão <leitao@debian.org> Cc: Nayna Jain <nayna@linux.ibm.com> Cc: Paulo Flabiano Smorigo <pfsmorigo@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11modpost: remove broken calculation of exception_table_entry sizeMasahiro Yamada
[ Upstream commit d0acc76a49aa917c1a455d11d32d34a01e8b2835 ] find_extable_entry_size() is completely broken. It has awesome comments about how to calculate sizeof(struct exception_table_entry). It was based on these assumptions: - struct exception_table_entry has two fields - both of the fields have the same size Then, we came up with this equation: (offset of the second field) * 2 == (size of struct) It was true for all architectures when commit 52dc0595d540 ("modpost: handle relocations mismatch in __ex_table.") was applied. Our mathematics broke when commit 548acf19234d ("x86/mm: Expand the exception table logic to allow new handling options") introduced the third field. Now, the definition of exception_table_entry is highly arch-dependent. For x86, sizeof(struct exception_table_entry) is apparently 12, but find_extable_entry_size() sets extable_entry_size to 8. I could fix it, but I do not see much value in this code. extable_entry_size is used just for selecting a slightly different error message. If the first field ("insn") references to a non-executable section, The relocation at %s+0x%lx references section "%s" which is not executable, IOW it is not possible for the kernel to fault at that address. Something is seriously wrong and should be fixed. If the second field ("fixup") references to a non-executable section, The relocation at %s+0x%lx references section "%s" which is not executable, IOW the kernel will fault if it ever tries to jump to it. Something is seriously wrong and should be fixed. Merge the two error messages rather than adding even more complexity. Change fatal() to error() to make it continue running and catch more possible errors. Fixes: 548acf19234d ("x86/mm: Expand the exception table logic to allow new handling options") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11hwrng: virtio - Fix race on data_avail and actual dataHerbert Xu
[ Upstream commit ac52578d6e8d300dd50f790f29a24169b1edd26c ] The virtio rng device kicks off a new entropy request whenever the data available reaches zero. When a new request occurs at the end of a read operation, that is, when the result of that request is only needed by the next reader, then there is a race between the writing of the new data and the next reader. This is because there is no synchronisation whatsoever between the writer and the reader. Fix this by writing data_avail with smp_store_release and reading it with smp_load_acquire when we first enter read. The subsequent reads are safe because they're either protected by the first load acquire, or by the completion mechanism. Also remove the redundant zeroing of data_idx in random_recv_done (data_idx must already be zero at this point) and data_avail in request_entropy (ditto). Reported-by: syzbot+726dc8c62c3536431ceb@syzkaller.appspotmail.com Fixes: f7f510ec1957 ("virtio: An entropy device, as suggested by hpa.") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11vfio/mdev: Move the compat_class initialization to module initEric Farman
[ Upstream commit ff598081e5b9d0bdd6874bfe340811bbb75b35e4 ] The pointer to mdev_bus_compat_class is statically defined at the top of mdev_core, and was originally (commit 7b96953bc640 ("vfio: Mediated device Core driver") serialized by the parent_list_lock. The blamed commit removed this mutex, leaving the pointer initialization unserialized. As a result, the creation of multiple MDEVs in parallel (such as during boot) can encounter errors during the creation of the sysfs entries, such as: [ 8.337509] sysfs: cannot create duplicate filename '/class/mdev_bus' [ 8.337514] vfio_ccw 0.0.01d8: MDEV: Registered [ 8.337516] CPU: 13 PID: 946 Comm: driverctl Not tainted 6.4.0-rc7 #20 [ 8.337522] Hardware name: IBM 3906 M05 780 (LPAR) [ 8.337525] Call Trace: [ 8.337528] [<0000000162b0145a>] dump_stack_lvl+0x62/0x80 [ 8.337540] [<00000001622aeb30>] sysfs_warn_dup+0x78/0x88 [ 8.337549] [<00000001622aeca6>] sysfs_create_dir_ns+0xe6/0xf8 [ 8.337552] [<0000000162b04504>] kobject_add_internal+0xf4/0x340 [ 8.337557] [<0000000162b04d48>] kobject_add+0x78/0xd0 [ 8.337561] [<0000000162b04e0a>] kobject_create_and_add+0x6a/0xb8 [ 8.337565] [<00000001627a110e>] class_compat_register+0x5e/0x90 [ 8.337572] [<000003ff7fd815da>] mdev_register_parent+0x102/0x130 [mdev] [ 8.337581] [<000003ff7fdc7f2c>] vfio_ccw_sch_probe+0xe4/0x178 [vfio_ccw] [ 8.337588] [<0000000162a7833c>] css_probe+0x44/0x80 [ 8.337599] [<000000016279f4da>] really_probe+0xd2/0x460 [ 8.337603] [<000000016279fa08>] driver_probe_device+0x40/0xf0 [ 8.337606] [<000000016279fb78>] __device_attach_driver+0xc0/0x140 [ 8.337610] [<000000016279cbe0>] bus_for_each_drv+0x90/0xd8 [ 8.337618] [<00000001627a00b0>] __device_attach+0x110/0x190 [ 8.337621] [<000000016279c7c8>] bus_rescan_devices_helper+0x60/0xb0 [ 8.337626] [<000000016279cd48>] drivers_probe_store+0x48/0x80 [ 8.337632] [<00000001622ac9b0>] kernfs_fop_write_iter+0x138/0x1f0 [ 8.337635] [<00000001621e5e14>] vfs_write+0x1ac/0x2f8 [ 8.337645] [<00000001621e61d8>] ksys_write+0x70/0x100 [ 8.337650] [<0000000162b2bdc4>] __do_syscall+0x1d4/0x200 [ 8.337656] [<0000000162b3c828>] system_call+0x70/0x98 [ 8.337664] kobject: kobject_add_internal failed for mdev_bus with -EEXIST, don't try to register things with the same name in the same directory. [ 8.337668] kobject: kobject_create_and_add: kobject_add error: -17 [ 8.337674] vfio_ccw: probe of 0.0.01d9 failed with error -12 [ 8.342941] vfio_ccw_mdev aeb9ca91-10c6-42bc-a168-320023570aea: Adding to iommu group 2 Move the initialization of the mdev_bus_compat_class pointer to the init path, to match the cleanup in module exit. This way the code in mdev_register_parent() can simply link the new parent to it, rather than determining whether initialization is required first. Fixes: 89345d5177aa ("vfio/mdev: embedd struct mdev_parent in the parent data structure") Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20230626133642.2939168-1-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()Xinghui Li
[ Upstream commit 0c0206dc4f5ba2d18b15e24d2047487d6f73916b ] The ret variable in the vmd_enable_domain() function was used uninitialized when printing a warning message upon failure of the pci_reset_bus() function. Thus, fix the issue by assigning ret with the value returned from pci_reset_bus() before referencing it in the warning message. This was detected by Smatch: drivers/pci/controller/vmd.c:931 vmd_enable_domain() error: uninitialized symbol 'ret'. [kwilczynski: drop the second patch from the series, add missing reported by tag, commit log] Fixes: 0a584655ef89 ("PCI: vmd: Fix secondary bus reset for Intel bridges") Link: https://lore.kernel.org/all/202305270219.B96IiIfv-lkp@intel.com Link: https://lore.kernel.org/linux-pci/20230420094332.1507900-2-korantwork@gmail.com Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Xinghui Li <korantli@tencent.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11PCI: endpoint: functions/pci-epf-test: Fix dma_chan directionYoshihiro Shimoda
[ Upstream commit 880d51c729a3fa944794feb19f605eefe55916fc ] In pci_epf_test_init_dma_chan() epf_test->dma_chan_rx is assigned from dma_request_channel() with DMA_DEV_TO_MEM as filter.dma_mask. However, in pci_epf_test_data_transfer() if the dir is DMA_DEV_TO_MEM, epf->dma_chan_rx should be used but instead we are using epf_test->dma_chan_tx. Fix it. Link: https://lore.kernel.org/r/20230412063447.2841177-1-yoshihiro.shimoda.uh@renesas.com Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities") Tested-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11PCI: endpoint: Fix a Kconfig prompt of vNTB driverShunsuke Mie
[ Upstream commit 37587673cda963ec950e4983db5023802f9b5ff2 ] vNTB driver and NTB driver have same Kconfig prompt. Changed to make it distinguishable. Link: https://lore.kernel.org/r/20230202103832.2038286-1-mie@igel.co.jp Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP") Signed-off-by: Shunsuke Mie <mie@igel.co.jp> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11perf test: Set PERF_EXEC_PATH for script executionNamhyung Kim
[ Upstream commit e4ef3ef1bc0a3d2535427da78b8095ef657eb474 ] The task-analyzer.py script (actually every other scripts too) requires PERF_EXEC_PATH env to find dependent libraries and scripts. For scripts test to run correctly, it needs to set PERF_EXEC_PATH to the perf tool source directory. Instead of blindly update the env, let's check the directory structure to make sure it points to the correct location. Fixes: e8478b84d6ba ("perf test: add new task-analyzer tests") Cc: Petar Gligoric <petar.gligoric@rohde-schwarz.com> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Cc: Aditya Gupta <adityag@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11powerpc/mm/dax: Fix the condition when checking if altmap vmemap can ↵Aneesh Kumar K.V
cross-boundary [ Upstream commit c8eebc4a99f15280654f23e914e746c40a516e50 ] Without this fix, the last subsection vmemmap can end up in memory even if the namespace is created with -M mem and has sufficient space in the altmap area. Fixes: cf387d9644d8 ("libnvdimm/altmap: Track namespace boundaries in altmap") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Tested-by: Sachin Sant <sachinp@linux.ibm.com <mailto:sachinp@linux.ibm.com>> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230616110826.344417-6-aneesh.kumar@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11powerpc/book3s64/mm: Fix DirectMap stats in /proc/meminfoAneesh Kumar K.V
[ Upstream commit 0da90af431abc3f497a38ec9ef6e43b0d0dabe80 ] On memory unplug reduce DirectMap page count correctly. root@ubuntu-guest:# grep Direct /proc/meminfo DirectMap4k: 0 kB DirectMap64k: 0 kB DirectMap2M: 115343360 kB DirectMap1G: 0 kB Before fix: root@ubuntu-guest:# ndctl disable-namespace all disabled 1 namespace root@ubuntu-guest:# grep Direct /proc/meminfo DirectMap4k: 0 kB DirectMap64k: 0 kB DirectMap2M: 115343360 kB DirectMap1G: 0 kB After fix: root@ubuntu-guest:# ndctl disable-namespace all disabled 1 namespace root@ubuntu-guest:# grep Direct /proc/meminfo DirectMap4k: 0 kB DirectMap64k: 0 kB DirectMap2M: 104857600 kB DirectMap1G: 0 kB Fixes: a2dc009afa9a ("powerpc/mm/book3s/radix: Add mapping statistics") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Tested-by: Sachin Sant <sachinp@linux.ibm.com <mailto:sachinp@linux.ibm.com>> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230616110826.344417-4-aneesh.kumar@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11riscv: uprobes: Restore thread.bad_causeTiezhu Yang
[ Upstream commit 58b1294dd1d65bb62f08dddbf418f954210c2057 ] thread.bad_cause is saved in arch_uprobe_pre_xol(), it should be restored in arch_uprobe_{post,abort}_xol() accordingly, otherwise the save operation is meaningless, this change is similar with x86 and powerpc. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Acked-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Guo Ren <guoren@kernel.org> Fixes: 74784081aac8 ("riscv: Add uprobes supported") Link: https://lore.kernel.org/r/1682214146-3756-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11platform/x86:intel/pmc: Update maps for Meteor Lake P/M platformsXi Pardee
[ Upstream commit 9682cfd1973d01e43c2764c662e6d3291ddf770d ] Fix the IP name errors in the register maps used by the following debugfs attributes in the Meteor Lake SOC-M PMC. pfear_sts lpm_sts ltr_show Fixes: c5ad454a12c6 ("platform/x86: intel/pmc/core: Add Meteor Lake support to pmc core driver") Signed-off-by: Xi Pardee <xi.pardee@intel.com> Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230613225347.2720665-2-rajvi.jingar@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11powerpc: update ppc_save_regs to save current r1 in pt_regsAditya Gupta
[ Upstream commit b684c09f09e7a6af3794d4233ef785819e72db79 ] ppc_save_regs() skips one stack frame while saving the CPU register states. Instead of saving current R1, it pulls the previous stack frame pointer. When vmcores caused by direct panic call (such as `echo c > /proc/sysrq-trigger`), are debugged with gdb, gdb fails to show the backtrace correctly. On further analysis, it was found that it was because of mismatch between r1 and NIP. GDB uses NIP to get current function symbol and uses corresponding debug info of that function to unwind previous frames, but due to the mismatching r1 and NIP, the unwinding does not work, and it fails to unwind to the 2nd frame and hence does not show the backtrace. GDB backtrace with vmcore of kernel without this patch: --------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=<optimized out>, newregs=0xc000000004f8f8d8) at ./arch/powerpc/include/asm/kexec.h:69 #1 __crash_kexec (regs=<optimized out>) at kernel/kexec_core.c:974 #2 0x0000000000000063 in ?? () #3 0xc000000003579320 in ?? () --------- Further analysis revealed that the mismatch occurred because "ppc_save_regs" was saving the previous stack's SP instead of the current r1. This patch fixes this by storing current r1 in the saved pt_regs. GDB backtrace with vmcore of patched kernel: -------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=0x0, newregs=0xc00000000670b8d8) at ./arch/powerpc/include/asm/kexec.h:69 #1 __crash_kexec (regs=regs@entry=0x0) at kernel/kexec_core.c:974 #2 0xc000000000168918 in panic (fmt=fmt@entry=0xc000000001654a60 "sysrq triggered crash\n") at kernel/panic.c:358 #3 0xc000000000b735f8 in sysrq_handle_crash (key=<optimized out>) at drivers/tty/sysrq.c:155 #4 0xc000000000b742cc in __handle_sysrq (key=key@entry=99, check_mask=check_mask@entry=false) at drivers/tty/sysrq.c:602 #5 0xc000000000b7506c in write_sysrq_trigger (file=<optimized out>, buf=<optimized out>, count=2, ppos=<optimized out>) at drivers/tty/sysrq.c:1163 #6 0xc00000000069a7bc in pde_write (ppos=<optimized out>, count=<optimized out>, buf=<optimized out>, file=<optimized out>, pde=0xc00000000362cb40) at fs/proc/inode.c:340 #7 proc_reg_write (file=<optimized out>, buf=<optimized out>, count=<optimized out>, ppos=<optimized out>) at fs/proc/inode.c:352 #8 0xc0000000005b3bbc in vfs_write (file=file@entry=0xc000000006aa6b00, buf=buf@entry=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=count@entry=2, pos=pos@entry=0xc00000000670bda0) at fs/read_write.c:582 #9 0xc0000000005b4264 in ksys_write (fd=<optimized out>, buf=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=2) at fs/read_write.c:637 #10 0xc00000000002ea2c in system_call_exception (regs=0xc00000000670be80, r0=<optimized out>) at arch/powerpc/kernel/syscall.c:171 #11 0xc00000000000c270 in system_call_vectored_common () at arch/powerpc/kernel/interrupt_64.S:192 -------- Nick adds: So this now saves regs as though it was an interrupt taken in the caller, at the instruction after the call to ppc_save_regs, whereas previously the NIP was there, but R1 came from the caller's caller and that mismatch is what causes gdb's dwarf unwinder to go haywire. Signed-off-by: Aditya Gupta <adityag@linux.ibm.com> Fixes: d16a58f8854b1 ("powerpc: Improve ppc_save_regs()") Reivewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230615091047.90433-1-adityag@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11powerpc/powernv/sriov: perform null check on iov before dereferencing iovColin Ian King
[ Upstream commit f4f913c980bc6abe0ccfe88fe3909c125afe4a2d ] Currently pointer iov is being dereferenced before the null check of iov which can lead to null pointer dereference errors. Fix this by moving the iov null check before the dereferencing. Detected using cppcheck static analysis: linux/arch/powerpc/platforms/powernv/pci-sriov.c:597:12: warning: Either the condition '!iov' is redundant or there is possible null pointer dereference: iov. [nullPointerRedundantCheck] num_vfs = iov->num_vfs; ^ Fixes: 052da31d45fc ("powerpc/powernv/sriov: De-indent setup and teardown") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230608095849.1147969-1-colin.i.king@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11scsi: ufs: core: mcq: Fix the incorrect OCS value for the device commandStanley Chu
[ Upstream commit 0fef6bb730c490fcdc4347dbd21646d3ffe62cf5 ] In MCQ mode, when a device command uses a hardware queue shared with other commands, a race condition may occur in the following scenario: 1. A device command is completed in CQx with CQE entry "e". 2. The interrupt handler copies the "cqe" pointer to "hba->dev_cmd.cqe" and completes "hba->dev_cmd.complete". 3. The "ufshcd_wait_for_dev_cmd()" function is awakened and retrieves the OCS value from "hba->dev_cmd.cqe". However, there is a possibility that the CQE entry "e" will be overwritten by newly completed commands in CQx, resulting in an incorrect OCS value being received by "ufshcd_wait_for_dev_cmd()". To avoid this race condition, the OCS value should be immediately copied to the struct "lrb" of the device command. Then "ufshcd_wait_for_dev_cmd()" can retrieve the OCS value from the struct "lrb". Fixes: 57b1c0ef89ac ("scsi: ufs: core: mcq: Add support to allocate multiple queues") Suggested-by: Can Guo <quic_cang@quicinc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Link: https://lore.kernel.org/r/20230610021553.1213-2-powen.kao@mediatek.com Tested-by: Po-Wen Kao <powen.kao@mediatek.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11scsi: ufs: core: Remove a ufshcd_add_command_trace() callBart Van Assche
[ Upstream commit 72554035b9797e00e68cd866e6cefa7f0b2c6f76 ] ufshcd_add_command_trace() traces SCSI commands. Remove a ufshcd_add_command_trace() call from a code path that is not related to SCSI commands. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230531224050.25554-1-bvanassche@acm.org Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Stable-dep-of: 0fef6bb730c4 ("scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11perf stat: Reset aggr stats for each runNamhyung Kim
[ Upstream commit ed4090a22c123b9b33368741253edddc6ff8d18f ] When it runs multiple times with -r option, it missed to reset the aggregation counters and the values were added up. The aggregation count has the values to be printed in the end. It should reset the counters at the beginning of each run. But the current code does that only when -I/--interval-print option is given. Fixes: 91f85f98da7ab8c3 ("perf stat: Display event stats using aggr counts") Reported-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230616073211.1057936-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-12-30 16:35:20 +0000