summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-02-23Linux 4.19.231v4.19.231Greg Kroah-Hartman
Link: https://lore.kernel.org/r/20220221084911.895146879@linuxfoundation.org Tested-by: Hulk Robot <hulkrobot@huawei.com> Tested-by: Pavel Machek (CIP) <pavel@denx.de> Tested-by: Slade Watkins <slade@sladewatkins.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23net: macb: Align the dma and coherent dma masksMarc St-Amand
[ Upstream commit 37f7860602b5b2d99fc7465f6407f403f5941988 ] Single page and coherent memory blocks can use different DMA masks when the macb accesses physical memory directly. The kernel is clever enough to allocate pages that fit into the requested address width. When using the ARM SMMU, the DMA mask must be the same for single pages and big coherent memory blocks. Otherwise the translation tables turn into one big mess. [ 74.959909] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK [ 74.959989] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1 [ 75.173939] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK [ 75.173955] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1 Since using the same DMA mask does not hurt direct 1:1 physical memory mappings, this commit always aligns DMA and coherent masks. Signed-off-by: Marc St-Amand <mstamand@ciena.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23net: usb: qmi_wwan: Add support for Dell DW5829eSlark Xiao
[ Upstream commit 8ecbb179286cbc91810c16caeb3396e06305cd0c ] Dell DW5829e same as DW5821e except the CAT level. DW5821e supports CAT16 but DW5829e supports CAT9. Also, DW5829e includes normal and eSIM type. Please see below test evidence: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e6 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e4 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Signed-off-by: Slark Xiao <slark_xiao@163.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20220209024717.8564-1-slark_xiao@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23tracing: Fix tp_printk option related with tp_printk_stop_on_bootJaeSang Yoo
[ Upstream commit 3203ce39ac0b2a57a84382ec184c7d4a0bede175 ] The kernel parameter "tp_printk_stop_on_boot" starts with "tp_printk" which is the same as another kernel parameter "tp_printk". If "tp_printk" setup is called before the "tp_printk_stop_on_boot", it will override the latter and keep it from being set. This is similar to other kernel parameter issues, such as: Commit 745a600cf1a6 ("um: console: Ignore console= option") or init/do_mounts.c:45 (setup function of "ro" kernel param) Fix it by checking for a "_" right after the "tp_printk" and if that exists do not process the parameter. Link: https://lkml.kernel.org/r/20220208195421.969326-1-jsyoo5b@gmail.com Signed-off-by: JaeSang Yoo <jsyoo5b@gmail.com> [ Fixed up change log and added space after if condition ] Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23ata: libata-core: Disable TRIM on M88V29Zoltán Böszörményi
[ Upstream commit c8ea23d5fa59f28302d4e3370c75d9c308e64410 ] This device is a CF card, or possibly an SSD in CF form factor. It supports NCQ and high speed DMA. While it also advertises TRIM support, I/O errors are reported when the discard mount option fstrim is used. TRIM also fails when disabling NCQ and not just as an NCQ command. TRIM must be disabled for this device. Signed-off-by: Zoltán Böszörményi <zboszor@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23kconfig: let 'shell' return enough output for deep path namesBrenda Streiff
[ Upstream commit 8a4c5b2a6d8ea079fa36034e8167de87ab6f8880 ] The 'shell' built-in only returns the first 256 bytes of the command's output. In some cases, 'shell' is used to return a path; by bumping up the buffer size to 4096 this lets us capture up to PATH_MAX. The specific case where I ran into this was due to commit 1e860048c53e ("gcc-plugins: simplify GCC plugin-dev capability test"). After this change, we now use `$(shell,$(CC) -print-file-name=plugin)` to return a path; if the gcc path is particularly long, then the path ends up truncated at the 256 byte mark, which makes the HAVE_GCC_PLUGINS depends test always fail. Signed-off-by: Brenda Streiff <brenda.streiff@ni.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23arm64: dts: meson-gx: add ATF BL32 reserved-memory regionChristian Hewitt
[ Upstream commit 76577c9137456febb05b0e17d244113196a98968 ] Add an additional reserved memory region for the BL32 trusted firmware present in many devices that boot from Amlogic vendor u-boot. Suggested-by: Mateusz Krzak <kszaquitto@gmail.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220126044954.19069-2-christianshewitt@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23netfilter: conntrack: don't refresh sctp entries in closed stateFlorian Westphal
[ Upstream commit 77b337196a9d87f3d6bb9b07c0436ecafbffda1e ] Vivek Thrivikraman reported: An SCTP server application which is accessed continuously by client application. When the session disconnects the client retries to establish a connection. After restart of SCTP server application the session is not established because of stale conntrack entry with connection state CLOSED as below. (removing this entry manually established new connection): sctp 9 CLOSED src=10.141.189.233 [..] [ASSURED] Just skip timeout update of closed entries, we don't want them to stay around forever. Reported-and-tested-by: Vivek Thrivikraman <vivek.thrivikraman@est.tech> Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1579 Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23irqchip/sifive-plic: Add missing thead,c900-plic match stringGuo Ren
[ Upstream commit 1d4df649cbb4b26d19bea38ecff4b65b10a1bbca ] The thead,c900-plic has been used in opensbi to distinguish PLIC [1]. Although PLICs have the same behaviors in Linux, they are different hardware with some custom initializing in firmware(opensbi). Qute opensbi patch commit-msg by Samuel: The T-HEAD PLIC implementation requires setting a delegation bit to allow access from S-mode. Now that the T-HEAD PLIC has its own compatible string, set this bit automatically from the PLIC driver, instead of reaching into the PLIC's MMIO space from another driver. [1]: https://github.com/riscv-software-src/opensbi/commit/78c2b19218bd62653b9fb31623a42ced45f38ea6 Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Anup Patel <anup@brainfault.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Samuel Holland <samuel@sholland.org> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220130135634.1213301-3-guoren@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23ARM: OMAP2+: hwmod: Add of_node_put() before breakWan Jiabing
[ Upstream commit 80c469a0a03763f814715f3d12b6f3964c7423e8 ] Fix following coccicheck warning: ./arch/arm/mach-omap2/omap_hwmod.c:753:1-23: WARNING: Function for_each_matching_node should have of_node_put() before break Early exits from for_each_matching_node should decrement the node reference counter. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAWJim Mattson
[ Upstream commit 710c476514313c74045c41c0571bb5178fd16e3d ] AMD's event select is 3 nybbles, with the high nybble in bits 35:32 of a PerfEvtSeln MSR. Don't mask off the high nybble when configuring a RAW perf event. Fixes: ca724305a2b0 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM") Signed-off-by: Jim Mattson <jmattson@google.com> Message-Id: <20220203014813.2130559-2-jmattson@google.com> Reviewed-by: David Dunn <daviddunn@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23Drivers: hv: vmbus: Fix memory leak in vmbus_add_channel_kobjMiaoqian Lin
[ Upstream commit 8bc69f86328e87a0ffa79438430cc82f3aa6a194 ] kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add()： If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix memory leak by calling kobject_put(). Fixes: c2e5df616e1a ("vmbus: add per-channel sysfs info") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Juan Vazquez <juvazq@linux.microsoft.com> Link: https://lore.kernel.org/r/20220203173008.43480-1-linmq006@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23Drivers: hv: vmbus: Expose monitor data only when monitor pages are usedKimberly Brown
[ Upstream commit 46fc15487d02451448c11b83c4d086d87a6ad588 ] There are two methods for signaling the host: the monitor page mechanism and hypercalls. The monitor page mechanism is used by performance critical channels (storage, networking, etc.) because it provides improved throughput. However, latency is increased. Monitor pages are allocated to these channels. Monitor pages are not allocated to channels that do not use the monitor page mechanism. Therefore, these channels do not have a valid monitor id or valid monitor page data. In these cases, some of the "_show" functions return incorrect data. They return an invalid monitor id and data that is beyond the bounds of the hv_monitor_page array fields. The "channel->offermsg.monitor_allocated" value can be used to determine whether monitor pages have been allocated to a channel. Add "is_visible()" callback functions for the device-level and channel-level attribute groups. These functions will hide the monitor sysfs files when the monitor mechanism is not used. Remove ".default_attributes" from "vmbus_chan_attrs" and create a channel-level attribute group. These changes allow the new "is_visible()" callback function to be applied to the channel-level attributes. Call "sysfs_create_group()" in "vmbus_add_channel_kobj()" to create the channel's sysfs files. Add a new function, “vmbus_remove_channel_attr_group()”, and call it in "free_channel()" to remove the channel's sysfs files when the channel is closed. Signed-off-by: Kimberly Brown <kimbrownkd@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23mtd: rawnand: brcmnand: Fixed incorrect sub-page ECC statusdavid regan
[ Upstream commit 36415a7964711822e63695ea67fede63979054d9 ] The brcmnand driver contains a bug in which if a page (example 2k byte) is read from the parallel/ONFI NAND and within that page a subpage (512 byte) has correctable errors which is followed by a subpage with uncorrectable errors, the page read will return the wrong status of correctable (as opposed to the actual status of uncorrectable.) The bug is in function brcmnand_read_by_pio where there is a check for uncorrectable bits which will be preempted if a previous status for correctable bits is detected. The fix is to stop checking for bad bits only if we already have a bad bits status. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: david regan <dregan@mail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/trinity-478e0c09-9134-40e8-8f8c-31c371225eda-1643237024774@3c-app-mailcom-lxa02 Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23mtd: rawnand: brcmnand: Refactored code to introduce helper functionsKamal Dasu
[ Upstream commit 3c7c1e4594efd57b98ae6f7298f40cff4f4fb47b ] Refactored NAND ECC and CMD address configuration code to use helper functions. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23lib/iov_iter: initialize "flags" in new pipe_bufferMax Kellermann
commit 9d2231c5d74e13b2a0546fee6737ee4446017903 upstream. The functions copy_page_to_iter_pipe() and push_pipe() can both allocate a new pipe_buffer, but the "flags" member initializer is missing. Fixes: 241699cd72a8 ("new iov_iter flavour: pipe-backed") To: Alexander Viro <viro@zeniv.linux.org.uk> To: linux-fsdevel@vger.kernel.org To: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Max Kellermann <max.kellermann@ionos.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23i2c: brcmstb: fix support for DSL and CM variantsRafał Miłecki
commit 834cea3a252ed4847db076a769ad9efe06afe2d5 upstream. DSL and CM (Cable Modem) support 8 B max transfer size and have a custom DT binding for that reason. This driver was checking for a wrong "compatible" however which resulted in an incorrect setup. Fixes: e2e5a2c61837 ("i2c: brcmstb: Adding support for CM and DSL SoCs") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23dmaengine: sh: rcar-dmac: Check for error num after setting maskJiasheng Jiang
commit 2d21543efe332cd8c8f212fb7d365bc8b0690bfa upstream. Because of the possible failure of the dma_supported(), the dma_set_mask_and_coherent() may return error num. Therefore, it should be better to check it and return the error if fails. Fixes: dc312349e875 ("dmaengine: rcar-dmac: Widen DMA mask to 40 bits") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220106030939.2644320-1-jiasheng@iscas.ac.cn Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23net: sched: limit TC_ACT_REPEAT loopsEric Dumazet
commit 5740d068909676d4bdb5c9c00c37a83df7728909 upstream. We have been living dangerously, at the mercy of malicious users, abusing TC_ACT_REPEAT, as shown by this syzpot report [1]. Add an arbitrary limit (32) to the number of times an action can return TC_ACT_REPEAT. v2: switch the limit to 32 instead of 10. Use net_warn_ratelimited() instead of pr_err_once(). [1] (C repro available on demand) rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 1-...!: (10500 ticks this GP) idle=021/1/0x4000000000000000 softirq=5592/5592 fqs=0 (t=10502 jiffies g=5305 q=190) rcu: rcu_preempt kthread timer wakeup didn't happen for 10502 jiffies! g5305 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 rcu: Possible timer handling issue on cpu=0 timer-softirq=3527 rcu: rcu_preempt kthread starved for 10505 jiffies! g5305 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:I stack:29344 pid: 14 ppid: 2 flags:0x00004000 Call Trace: <TASK> context_switch kernel/sched/core.c:4986 [inline] __schedule+0xab2/0x4db0 kernel/sched/core.c:6295 schedule+0xd2/0x260 kernel/sched/core.c:6368 schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881 rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1963 rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2136 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> rcu: Stack dump where RCU GP kthread last ran: Sending NMI from CPU 1 to CPUs 0: NMI backtrace for cpu 0 CPU: 0 PID: 3646 Comm: syz-executor358 Not tainted 5.17.0-rc3-syzkaller-00149-gbf8e59fd315f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:rep_nop arch/x86/include/asm/vdso/processor.h:13 [inline] RIP: 0010:cpu_relax arch/x86/include/asm/vdso/processor.h:18 [inline] RIP: 0010:pv_wait_head_or_lock kernel/locking/qspinlock_paravirt.h:437 [inline] RIP: 0010:__pv_queued_spin_lock_slowpath+0x3b8/0xb40 kernel/locking/qspinlock.c:508 Code: 48 89 eb c6 45 01 01 41 bc 00 80 00 00 48 c1 e9 03 83 e3 07 41 be 01 00 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8d 2c 01 eb 0c <f3> 90 41 83 ec 01 0f 84 72 04 00 00 41 0f b6 45 00 38 d8 7f 08 84 RSP: 0018:ffffc9000283f1b0 EFLAGS: 00000206 RAX: 0000000000000003 RBX: 0000000000000000 RCX: 1ffff1100fc0071e RDX: 0000000000000001 RSI: 0000000000000201 RDI: 0000000000000000 RBP: ffff88807e0038f0 R08: 0000000000000001 R09: ffffffff8ffbf9ff R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000004c1e R13: ffffed100fc0071e R14: 0000000000000001 R15: ffff8880b9c3aa80 FS: 00005555562bf300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffdbfef12b8 CR3: 00000000723c2000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> pv_queued_spin_lock_slowpath arch/x86/include/asm/paravirt.h:591 [inline] queued_spin_lock_slowpath arch/x86/include/asm/qspinlock.h:51 [inline] queued_spin_lock include/asm-generic/qspinlock.h:85 [inline] do_raw_spin_lock+0x200/0x2b0 kernel/locking/spinlock_debug.c:115 spin_lock_bh include/linux/spinlock.h:354 [inline] sch_tree_lock include/net/sch_generic.h:610 [inline] sch_tree_lock include/net/sch_generic.h:605 [inline] prio_tune+0x3b9/0xb50 net/sched/sch_prio.c:211 prio_init+0x5c/0x80 net/sched/sch_prio.c:244 qdisc_create.constprop.0+0x44a/0x10f0 net/sched/sch_api.c:1253 tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5594 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:725 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2413 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2496 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f7ee98aae99 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffdbfef12d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffdbfef1300 RCX: 00007f7ee98aae99 RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 0000000000000000 R08: 000000000000000d R09: 000000000000000d R10: 000000000000000d R11: 0000000000000246 R12: 00007ffdbfef12f0 R13: 00000000000f4240 R14: 000000000004ca47 R15: 00007ffdbfef12e4 </TASK> INFO: NMI handler (nmi_cpu_backtrace_handler) took too long to run: 2.293 msecs NMI backtrace for cpu 1 CPU: 1 PID: 3260 Comm: kworker/1:3 Not tainted 5.17.0-rc3-syzkaller-00149-gbf8e59fd315f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: mld mld_ifc_work Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 nmi_cpu_backtrace.cold+0x47/0x144 lib/nmi_backtrace.c:111 nmi_trigger_cpumask_backtrace+0x1b3/0x230 lib/nmi_backtrace.c:62 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline] rcu_dump_cpu_stacks+0x25e/0x3f0 kernel/rcu/tree_stall.h:343 print_cpu_stall kernel/rcu/tree_stall.h:604 [inline] check_cpu_stall kernel/rcu/tree_stall.h:688 [inline] rcu_pending kernel/rcu/tree.c:3919 [inline] rcu_sched_clock_irq.cold+0x5c/0x759 kernel/rcu/tree.c:2617 update_process_times+0x16d/0x200 kernel/time/timer.c:1785 tick_sched_handle+0x9b/0x180 kernel/time/tick-sched.c:226 tick_sched_timer+0x1b0/0x2d0 kernel/time/tick-sched.c:1428 __run_hrtimer kernel/time/hrtimer.c:1685 [inline] __hrtimer_run_queues+0x1c0/0xe50 kernel/time/hrtimer.c:1749 hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline] __sysvec_apic_timer_interrupt+0x146/0x530 arch/x86/kernel/apic/apic.c:1103 sysvec_apic_timer_interrupt+0x8e/0xc0 arch/x86/kernel/apic/apic.c:1097 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638 RIP: 0010:__sanitizer_cov_trace_const_cmp4+0xc/0x70 kernel/kcov.c:286 Code: 00 00 00 48 89 7c 30 e8 48 89 4c 30 f0 4c 89 54 d8 20 48 89 10 5b c3 0f 1f 80 00 00 00 00 41 89 f8 bf 03 00 00 00 4c 8b 14 24 <89> f1 65 48 8b 34 25 00 70 02 00 e8 14 f9 ff ff 84 c0 74 4b 48 8b RSP: 0018:ffffc90002c5eea8 EFLAGS: 00000246 RAX: 0000000000000007 RBX: ffff88801c625800 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: ffff8880137d3100 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff874fcd88 R11: 0000000000000000 R12: ffff88801d692dc0 R13: ffff8880137d3104 R14: 0000000000000000 R15: ffff88801d692de8 tcf_police_act+0x358/0x11d0 net/sched/act_police.c:256 tcf_action_exec net/sched/act_api.c:1049 [inline] tcf_action_exec+0x1a6/0x530 net/sched/act_api.c:1026 tcf_exts_exec include/net/pkt_cls.h:326 [inline] route4_classify+0xef0/0x1400 net/sched/cls_route.c:179 __tcf_classify net/sched/cls_api.c:1549 [inline] tcf_classify+0x3e8/0x9d0 net/sched/cls_api.c:1615 prio_classify net/sched/sch_prio.c:42 [inline] prio_enqueue+0x3a7/0x790 net/sched/sch_prio.c:75 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3668 __dev_xmit_skb net/core/dev.c:3756 [inline] __dev_queue_xmit+0x1f61/0x3660 net/core/dev.c:4081 neigh_hh_output include/net/neighbour.h:533 [inline] neigh_output include/net/neighbour.h:547 [inline] ip_finish_output2+0x14dc/0x2170 net/ipv4/ip_output.c:228 __ip_finish_output net/ipv4/ip_output.c:306 [inline] __ip_finish_output+0x396/0x650 net/ipv4/ip_output.c:288 ip_finish_output+0x32/0x200 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip_output+0x196/0x310 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:451 [inline] ip_local_out+0xaf/0x1a0 net/ipv4/ip_output.c:126 iptunnel_xmit+0x628/0xa50 net/ipv4/ip_tunnel_core.c:82 geneve_xmit_skb drivers/net/geneve.c:966 [inline] geneve_xmit+0x10c8/0x3530 drivers/net/geneve.c:1077 __netdev_start_xmit include/linux/netdevice.h:4683 [inline] netdev_start_xmit include/linux/netdevice.h:4697 [inline] xmit_one net/core/dev.c:3473 [inline] dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3489 __dev_queue_xmit+0x2985/0x3660 net/core/dev.c:4116 neigh_hh_output include/net/neighbour.h:533 [inline] neigh_output include/net/neighbour.h:547 [inline] ip6_finish_output2+0xf7a/0x14f0 net/ipv6/ip6_output.c:126 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline] __ip6_finish_output+0x61e/0xe90 net/ipv6/ip6_output.c:170 ip6_finish_output+0x32/0x200 net/ipv6/ip6_output.c:201 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:224 dst_output include/net/dst.h:451 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] mld_sendpack+0x9a3/0xe40 net/ipv6/mcast.c:1826 mld_send_cr net/ipv6/mcast.c:2127 [inline] mld_ifc_work+0x71c/0xdc0 net/ipv6/mcast.c:2659 process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307 worker_thread+0x657/0x1110 kernel/workqueue.c:2454 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> ---------------- Code disassembly (best guess): 0: 48 89 eb mov %rbp,%rbx 3: c6 45 01 01 movb $0x1,0x1(%rbp) 7: 41 bc 00 80 00 00 mov $0x8000,%r12d d: 48 c1 e9 03 shr $0x3,%rcx 11: 83 e3 07 and $0x7,%ebx 14: 41 be 01 00 00 00 mov $0x1,%r14d 1a: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax 21: fc ff df 24: 4c 8d 2c 01 lea (%rcx,%rax,1),%r13 28: eb 0c jmp 0x36 * 2a: f3 90 pause <-- trapping instruction 2c: 41 83 ec 01 sub $0x1,%r12d 30: 0f 84 72 04 00 00 je 0x4a8 36: 41 0f b6 45 00 movzbl 0x0(%r13),%eax 3b: 38 d8 cmp %bl,%al 3d: 7f 08 jg 0x47 3f: 84 .byte 0x84 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220215235305.3272331-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23EDAC: Fix calculation of returned address and next offset in edac_align_ptr()Eliav Farber
commit f8efca92ae509c25e0a4bd5d0a86decea4f0c41e upstream. Do alignment logic properly and use the "ptr" local variable for calculating the remainder of the alignment. This became an issue because struct edac_mc_layer has a size that is not zero modulo eight, and the next offset that was prepared for the private data was unaligned, causing an alignment exception. The patch in Fixes: which broke this actually wanted to "what we actually care about is the alignment of the actual pointer that's about to be returned." But it didn't check that alignment. Use the correct variable "ptr" for that. [ bp: Massage commit message. ] Fixes: 8447c4d15e35 ("edac: Do alignment logic properly in edac_align_ptr()") Signed-off-by: Eliav Farber <farbere@amazon.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220113100622.12783-2-farbere@amazon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23mtd: rawnand: qcom: Fix clock sequencing in qcom_nandc_probe()Bryan O'Donoghue
commit 5c23b3f965bc9ee696bf2ed4bdc54d339dd9a455 upstream. Interacting with a NAND chip on an IPQ6018 I found that the qcomsmem NAND partition parser was returning -EPROBE_DEFER waiting for the main smem driver to load. This caused the board to reset. Playing about with the probe() function shows that the problem lies in the core clock being switched off before the nandc_unalloc() routine has completed. If we look at how qcom_nandc_remove() tears down allocated resources we see the expected order is qcom_nandc_unalloc(nandc); clk_disable_unprepare(nandc->aon_clk); clk_disable_unprepare(nandc->core_clk); dma_unmap_resource(&pdev->dev, nandc->base_dma, resource_size(res), DMA_BIDIRECTIONAL, 0); Tweaking probe() to both bring up and tear-down in that order removes the reset if we end up deferring elsewhere. Fixes: c76b78d8ec05 ("mtd: nand: Qualcomm NAND controller driver") Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220103030316.58301-2-bryan.odonoghue@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23NFS: Do not report writeback errors in nfs_getattr()Trond Myklebust
commit d19e0183a88306acda07f4a01fedeeffe2a2a06b upstream. The result of the writeback, whether it is an ENOSPC or an EIO, or anything else, does not inhibit the NFS client from reporting the correct file timestamps. Fixes: 79566ef018f5 ("NFS: Getattr doesn't require data sync semantics") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23NFS: LOOKUP_DIRECTORY is also ok with symlinksTrond Myklebust
commit e0caaf75d443e02e55e146fd75fe2efc8aed5540 upstream. Commit ac795161c936 (NFSv4: Handle case where the lookup of a directory fails) [1], part of Linux since 5.17-rc2, introduced a regression, where a symbolic link on an NFS mount to a directory on another NFS does not resolve(?) the first time it is accessed: Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Fixes: ac795161c936 ("NFSv4: Handle case where the lookup of a directory fails") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Tested-by: Donald Buczek <buczek@molgen.mpg.de> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23block/wbt: fix negative inflight counter when remove scsi deviceLaibin Qiu
commit e92bc4cd34de2ce454bdea8cd198b8067ee4e123 upstream. Now that we disable wbt by set WBT_STATE_OFF_DEFAULT in wbt_disable_default() when switch elevator to bfq. And when we remove scsi device, wbt will be enabled by wbt_enable_default. If it become false positive between wbt_wait() and wbt_track() when submit write request. The following is the scenario that triggered the problem. T1 T2 T3 elevator_switch_mq bfq_init_queue wbt_disable_default <= Set rwb->enable_state (OFF) Submit_bio blk_mq_make_request rq_qos_throttle <= rwb->enable_state (OFF) scsi_remove_device sd_remove del_gendisk blk_unregister_queue elv_unregister_queue wbt_enable_default <= Set rwb->enable_state (ON) q_qos_track <= rwb->enable_state (ON) ^^^^^^ this request will mark WBT_TRACKED without inflight add and will lead to drop rqw->inflight to -1 in wbt_done() which will trigger IO hung. Fix this by move wbt_enable_default() from elv_unregister to bfq_exit_queue(). Only re-enable wbt when bfq exit. Fixes: 76a8040817b4b ("blk-wbt: make sure throttle is enabled properly") Remove oneline stale comment, and kill one oneshot local variable. Signed-off-by: Ming Lei <ming.lei@rehdat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/linux-block/20211214133103.551813-1-qiulaibin@huawei.com/ Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23ext4: check for out-of-order index extents in ext4_valid_extent_entries()Zhang Yi
commit 8dd27fecede55e8a4e67eef2878040ecad0f0d33 upstream. After commit 5946d089379a ("ext4: check for overlapping extents in ext4_valid_extent_entries()"), we can check out the overlapping extent entry in leaf extent blocks. But the out-of-order extent entry in index extent blocks could also trigger bad things if the filesystem is inconsistent. So this patch add a check to figure out the out-of-order index extents and return error. Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20210908120850.4012324-2-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23powerpc/lib/sstep: fix 'ptesync' build errorAnders Roxell
commit fe663df7825811358531dc2e8a52d9eaa5e3515e upstream. Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian 2.37.90.20220207) the following build error shows up: {standard input}: Assembler messages: {standard input}:2088: Error: unrecognized opcode: `ptesync' make[3]: *** [/builds/linux/scripts/Makefile.build:287: arch/powerpc/lib/sstep.o] Error 1 Add the 'ifdef CONFIG_PPC64' around the 'ptesync' in function 'emulate_update_regs()' to like it is in 'analyse_instr()'. Since it looks like it got dropped inadvertently by commit 3cdfcbfd32b9 ("powerpc: Change analyse_instr so it doesn't modify *regs"). A key detail is that analyse_instr() will never recognise lwsync or ptesync on 32-bit (because of the existing ifdef), and as a result emulate_update_regs() should never be called with an op specifying either of those on 32-bit. So removing them from emulate_update_regs() should be a nop in terms of runtime behaviour. Fixes: 3cdfcbfd32b9 ("powerpc: Change analyse_instr so it doesn't modify *regs") Cc: stable@vger.kernel.org # v4.14+ Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> [mpe: Add last paragraph of change log mentioning analyse_instr() details] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220211005113.1361436-1-anders.roxell@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw_range()Mark Brown
commit 650204ded3703b5817bd4b6a77fa47d333c4f902 upstream. When writing out a stereo control we discard the change notification from the first channel, meaning that events are only generated based on changes to the second channel. Ensure that we report a change if either channel has changed. Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220201155629.120510-4-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw()Mark Brown
commit 564778d7b1ea465f9487eedeece7527a033549c5 upstream. When writing out a stereo control we discard the change notification from the first channel, meaning that events are only generated based on changes to the second channel. Ensure that we report a change if either channel has changed. Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220201155629.120510-2-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23ALSA: hda: Fix missing codec probe on Shenker Dock 15Takashi Iwai
commit dd8e5b161d7fb9cefa1f1d6e35a39b9e1563c8d3 upstream. By some unknown reason, BIOS on Shenker Dock 15 doesn't set up the codec mask properly for the onboard audio. Let's set the forced codec mask to enable the codec discovery. Reported-by: dmummenschanz@web.de Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/trinity-f018660b-95c9-442b-a2a8-c92a56eb07ed-1644345967148@3c-app-webde-bap22 Link: https://lore.kernel.org/r/20220214100020.8870-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23ALSA: hda: Fix regression on forced probe mask optionTakashi Iwai
commit 6317f7449348a897483a2b4841f7a9190745c81b upstream. The forced probe mask via probe_mask 0x100 bit doesn't work any longer as expected since the bus init code was moved and it's clearing the codec_mask value that was set beforehand. This patch fixes the long-time regression by moving the check_probe_mask() call. Fixes: a41d122449be ("ALSA: hda - Embed bus into controller object") Reported-by: dmummenschanz@web.de Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/trinity-f018660b-95c9-442b-a2a8-c92a56eb07ed-1644345967148@3c-app-webde-bap22 Link: https://lore.kernel.org/r/20220214100020.8870-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23libsubcmd: Fix use-after-free for realloc(..., 0)Kees Cook
commit 52a9dab6d892763b2a8334a568bd4e2c1a6fde66 upstream. GCC 12 correctly reports a potential use-after-free condition in the xrealloc helper. Fix the warning by avoiding an implicit "free(ptr)" when size == 0: In file included from help.c:12: In function 'xrealloc', inlined from 'add_cmdname' at help.c:24:2: subcmd-util.h:56:23: error: pointer may be used after 'realloc' [-Werror=use-after-free] 56 | ret = realloc(ptr, size); | ^~~~~~~~~~~~~~~~~~ subcmd-util.h:52:21: note: call to 'realloc' here 52 | void *ret = realloc(ptr, size); | ^~~~~~~~~~~~~~~~~~ subcmd-util.h:58:31: error: pointer may be used after 'realloc' [-Werror=use-after-free] 58 | ret = realloc(ptr, 1); | ^~~~~~~~~~~~~~~ subcmd-util.h:52:21: note: call to 'realloc' here 52 | void *ret = realloc(ptr, size); | ^~~~~~~~~~~~~~~~~~ Fixes: 2f4ce5ec1d447beb ("perf tools: Finalize subcmd independence") Reported-by: Valdis Klētnieks <valdis.kletnieks@vt.edu> Signed-off-by: Kees Kook <keescook@chromium.org> Tested-by: Valdis Klētnieks <valdis.kletnieks@vt.edu> Tested-by: Justin M. Forbes <jforbes@fedoraproject.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: linux-hardening@vger.kernel.org Cc: Valdis Klētnieks <valdis.kletnieks@vt.edu> Link: http://lore.kernel.org/lkml/20220213182443.4037039-1-keescook@chromium.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23bonding: fix data-races around agg_select_timerEric Dumazet
commit 9ceaf6f76b203682bb6100e14b3d7da4c0bedde8 upstream. syzbot reported that two threads might write over agg_select_timer at the same time. Make agg_select_timer atomic to fix the races. BUG: KCSAN: data-race in bond_3ad_initiate_agg_selection / bond_3ad_state_machine_handler read to 0xffff8881242aea90 of 4 bytes by task 1846 on cpu 1: bond_3ad_state_machine_handler+0x99/0x2810 drivers/net/bonding/bond_3ad.c:2317 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 write to 0xffff8881242aea90 of 4 bytes by task 25910 on cpu 0: bond_3ad_initiate_agg_selection+0x18/0x30 drivers/net/bonding/bond_3ad.c:1998 bond_open+0x658/0x6f0 drivers/net/bonding/bond_main.c:3967 __dev_open+0x274/0x3a0 net/core/dev.c:1407 dev_open+0x54/0x190 net/core/dev.c:1443 bond_enslave+0xcef/0x3000 drivers/net/bonding/bond_main.c:1937 do_set_master net/core/rtnetlink.c:2532 [inline] do_setlink+0x94f/0x2500 net/core/rtnetlink.c:2736 __rtnl_newlink net/core/rtnetlink.c:3414 [inline] rtnl_newlink+0xfeb/0x13e0 net/core/rtnetlink.c:3529 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5594 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000050 -> 0x0000004f Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 25910 Comm: syz-executor.1 Tainted: G W 5.17.0-rc4-syzkaller-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23drop_monitor: fix data-race in dropmon_net_event / trace_napi_poll_hitEric Dumazet
commit dcd54265c8bc14bd023815e36e2d5f9d66ee1fee upstream. trace_napi_poll_hit() is reading stat->dev while another thread can write on it from dropmon_net_event() Use READ_ONCE()/WRITE_ONCE() here, RCU rules are properly enforced already, we only have to take care of load/store tearing. BUG: KCSAN: data-race in dropmon_net_event / trace_napi_poll_hit write to 0xffff88816f3ab9c0 of 8 bytes by task 20260 on cpu 1: dropmon_net_event+0xb8/0x2b0 net/core/drop_monitor.c:1579 notifier_call_chain kernel/notifier.c:84 [inline] raw_notifier_call_chain+0x53/0xb0 kernel/notifier.c:392 call_netdevice_notifiers_info net/core/dev.c:1919 [inline] call_netdevice_notifiers_extack net/core/dev.c:1931 [inline] call_netdevice_notifiers net/core/dev.c:1945 [inline] unregister_netdevice_many+0x867/0xfb0 net/core/dev.c:10415 ip_tunnel_delete_nets+0x24a/0x280 net/ipv4/ip_tunnel.c:1123 vti_exit_batch_net+0x2a/0x30 net/ipv4/ip_vti.c:515 ops_exit_list net/core/net_namespace.c:173 [inline] cleanup_net+0x4dc/0x8d0 net/core/net_namespace.c:597 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 read to 0xffff88816f3ab9c0 of 8 bytes by interrupt on cpu 0: trace_napi_poll_hit+0x89/0x1c0 net/core/drop_monitor.c:292 trace_napi_poll include/trace/events/napi.h:14 [inline] __napi_poll+0x36b/0x3f0 net/core/dev.c:6366 napi_poll net/core/dev.c:6432 [inline] net_rx_action+0x29e/0x650 net/core/dev.c:6519 __do_softirq+0x158/0x2de kernel/softirq.c:558 do_softirq+0xb1/0xf0 kernel/softirq.c:459 __local_bh_enable_ip+0x68/0x70 kernel/softirq.c:383 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline] _raw_spin_unlock_bh+0x33/0x40 kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:394 [inline] ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline] wg_packet_decrypt_worker+0x73c/0x780 drivers/net/wireguard/receive.c:506 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 value changed: 0xffff88815883e000 -> 0x0000000000000000 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 26435 Comm: kworker/0:1 Not tainted 5.17.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: wg-crypt-wg2 wg_packet_decrypt_worker Fixes: 4ea7e38696c7 ("dropmon: add ability to detect when hardware dropsrxpackets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neil Horman <nhorman@tuxdriver.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23ping: fix the dif and sdif check in ping_lookupXin Long
commit 35a79e64de29e8d57a5989aac57611c0cd29e13e upstream. When 'ping' changes to use PING socket instead of RAW socket by: # sysctl -w net.ipv4.ping_group_range="0 100" There is another regression caused when matching sk_bound_dev_if and dif, RAW socket is using inet_iif() while PING socket lookup is using skb->dev->ifindex, the cmd below fails due to this: # ip link add dummy0 type dummy # ip link set dummy0 up # ip addr add 192.168.111.1/24 dev dummy0 # ping -I dummy0 192.168.111.1 -c1 The issue was also reported on: https://github.com/iputils/iputils/issues/104 But fixed in iputils in a wrong way by not binding to device when destination IP is on device, and it will cause some of kselftests to fail, as Jianlin noticed. This patch is to use inet(6)_iif and inet(6)_sdif to get dif and sdif for PING socket, and keep consistent with RAW socket. Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23net: ieee802154: ca8210: Fix lifs/sifs periodsMiquel Raynal
commit bdc120a2bcd834e571ce4115aaddf71ab34495de upstream. These periods are expressed in time units (microseconds) while 40 and 12 are the number of symbol durations these periods will last. We need to multiply them both with the symbol_duration in order to get these values in microseconds. Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220201180629.93410-2-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23net: dsa: lan9303: fix reset on probeMans Rullgard
commit 6bb9681a43f34f2cab4aad6e2a02da4ce54d13c5 upstream. The reset input to the LAN9303 chip is active low, and devicetree gpio handles reflect this. Therefore, the gpio should be requested with an initial state of high in order for the reset signal to be asserted. Other uses of the gpio already use the correct polarity. Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303") Signed-off-by: Mans Rullgard <mans@mansr.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fianelil <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220209145454.19749-1-mans@mansr.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23iwlwifi: pcie: gen2: fix locking when "HW not ready"Johannes Berg
commit 4c29c1e27a1e178a219b3877d055e6dd643bdfda upstream. If we run into this error path, we shouldn't unlock the mutex since it's not locked since. Fix this in the gen2 code as well. Fixes: eda50cde58de ("iwlwifi: pcie: add context information support") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/iwlwifi.20220128142706.b8b0dfce16ef.Ie20f0f7b23e5911350a2766524300d2915e7b677@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23iwlwifi: pcie: fix locking when "HW not ready"Johannes Berg
commit e9848aed147708a06193b40d78493b0ef6abccf2 upstream. If we run into this error path, we shouldn't unlock the mutex since it's not locked since. Fix this. Fixes: a6bd005fe92d ("iwlwifi: pcie: fix RF-Kill vs. firmware load race") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/iwlwifi.20220128142706.5d16821d1433.Id259699ddf9806459856d6aefbdbe54477aecffd@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23vsock: remove vsock from connected table when connect is interrupted by a signalSeth Forshee
commit b9208492fcaecff8f43915529ae34b3bcb03877c upstream. vsock_connect() expects that the socket could already be in the TCP_ESTABLISHED state when the connecting task wakes up with a signal pending. If this happens the socket will be in the connected table, and it is not removed when the socket state is reset. In this situation it's common for the process to retry connect(), and if the connection is successful the socket will be added to the connected table a second time, corrupting the list. Prevent this by calling vsock_remove_connected() if a signal is received while waiting for a connection. This is harmless if the socket is not in the connected table, and if it is in the table then removing it will prevent list corruption from a double add. Note for backporting: this patch requires d5afa82c977e ("vsock: correct removal of socket from the list"), which is in all current stable trees except 4.9.y. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Signed-off-by: Seth Forshee <sforshee@digitalocean.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20220217141312.2297547-1-sforshee@digitalocean.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23mmc: block: fix read single on recovery logicChristian Löhle
commit 54309fde1a352ad2674ebba004a79f7d20b9f037 upstream. On reads with MMC_READ_MULTIPLE_BLOCK that fail, the recovery handler will use MMC_READ_SINGLE_BLOCK for each of the blocks, up to MMC_READ_SINGLE_RETRIES times each. The logic for this is fixed to never report unsuccessful reads as success to the block layer. On command error with retries remaining, blk_update_request was called with whatever value error was set last to. In case it was last set to BLK_STS_OK (default), the read will be reported as success, even though there was no data read from the device. This could happen on a CRC mismatch for the response, a card rejecting the command (e.g. again due to a CRC mismatch). In case it was last set to BLK_STS_IOERR, the error is reported correctly, but no retries will be attempted. Fixes: 81196976ed946c ("mmc: block: Add blk-mq support") Cc: stable@vger.kernel.org Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/bc706a6ab08c4fe2834ba0c05a804672@hyperstone.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23taskstats: Cleanup the use of task->exit_codeEric W. Biederman
commit 1b5a42d9c85f0e731f01c8d1129001fd8531a8a0 upstream. In the function bacct_add_task the code reading task->exit_code was introduced in commit f3cef7a99469 ("[PATCH] csa: basic accounting over taskstats"), and it is not entirely clear what the taskstats interface is trying to return as only returning the exit_code of the first task in a process doesn't make a lot of sense. As best as I can figure the intent is to return task->exit_code after a task exits. The field is returned with per task fields, so the exit_code of the entire process is not wanted. Only the value of the first task is returned so this is not a useful way to get the per task ptrace stop code. The ordinary case of returning this value is returning after a task exits, which also precludes use for getting a ptrace value. It is common to for the first task of a process to also be the last task of a process so this field may have done something reasonable by accident in testing. Make ac_exitcode a reliable per task value by always returning it for every exited task. Setting ac_exitcode in a sensible mannter makes it possible to continue to provide this value going forward. Cc: Balbir Singh <bsingharora@gmail.com> Fixes: f3cef7a99469 ("[PATCH] csa: basic accounting over taskstats") Link: https://lkml.kernel.org/r/20220103213312.9144-5-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> [sudip: adjust context] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23xfrm: Don't accidentally set RTO_ONLINK in decode_session4()Guillaume Nault
commit 23e7b1bfed61e301853b5e35472820d919498278 upstream. Similar to commit 94e2238969e8 ("xfrm4: strip ECN bits from tos field"), clear the ECN bits from iph->tos when setting ->flowi4_tos. This ensures that the last bit of ->flowi4_tos is cleared, so ip_route_output_key_hash() isn't going to restrict the scope of the route lookup. Use ~INET_ECN_MASK instead of IPTOS_RT_MASK, because we have no reason to clear the high order bits. Found by code inspection, compile tested only. Fixes: 4da3089f2b58 ("[IPSEC]: Use TOS when doing tunnel lookups") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> [sudip: manually backport to previous location] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23drm/radeon: Fix backlight control on iMac 12,1Nicholas Bishop
commit 364438fd629f7611a84c8e6d7de91659300f1502 upstream. The iMac 12,1 does not use the gmux driver for backlight, so the radeon backlight device is needed to set the brightness. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1838 Signed-off-by: Nicholas Bishop <nicholasbishop@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23iwlwifi: fix use-after-freeJohannes Berg
commit bea2662e7818e15d7607d17d57912ac984275d94 upstream. If no firmware was present at all (or, presumably, all of the firmware files failed to parse), we end up unbinding by calling device_release_driver(), which calls remove(), which then in iwlwifi calls iwl_drv_stop(), freeing the 'drv' struct. However the new code I added will still erroneously access it after it was freed. Set 'failure=false' in this case to avoid the access, all data was already freed anyway. Cc: stable@vger.kernel.org Reported-by: Stefan Agner <stefan@agner.ch> Reported-by: Wolfgang Walter <linux@stwm.de> Reported-by: Jason Self <jason@bluehome.net> Reported-by: Dominik Behr <dominik@dominikbehr.com> Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Fixes: ab07506b0454 ("iwlwifi: fix leaks/bad data after failed firmware load") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220208114728.e6b514cf4c85.Iffb575ca2a623d7859b542c33b2a507d01554251@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23Revert "module, async: async_synchronize_full() on module init iff async is ↵Igor Pylypiv
used" [ Upstream commit 67d6212afda218d564890d1674bab28e8612170f ] This reverts commit 774a1221e862b343388347bac9b318767336b20b. We need to finish all async code before the module init sequence is done. In the reverted commit the PF_USED_ASYNC flag was added to mark a thread that called async_schedule(). Then the PF_USED_ASYNC flag was used to determine whether or not async_synchronize_full() needs to be invoked. This works when modprobe thread is calling async_schedule(), but it does not work if module dispatches init code to a worker thread which then calls async_schedule(). For example, PCI driver probing is invoked from a worker thread based on a node where device is attached: if (cpu < nr_cpu_ids) error = work_on_cpu(cpu, local_pci_probe, &ddi); else error = local_pci_probe(&ddi); We end up in a situation where a worker thread gets the PF_USED_ASYNC flag set instead of the modprobe thread. As a result, async_synchronize_full() is not invoked and modprobe completes without waiting for the async code to finish. The issue was discovered while loading the pm80xx driver: (scsi_mod.scan=async) modprobe pm80xx worker ... do_init_module() ... pci_call_probe() work_on_cpu(local_pci_probe) local_pci_probe() pm8001_pci_probe() scsi_scan_host() async_schedule() worker->flags |= PF_USED_ASYNC; ... < return from worker > ... if (current->flags & PF_USED_ASYNC) <--- false async_synchronize_full(); Commit 21c3c5d28007 ("block: don't request module during elevator init") fixed the deadlock issue which the reverted commit 774a1221e862 ("module, async: async_synchronize_full() on module init iff async is used") tried to fix. Since commit 0fdff3ec6d87 ("async, kmod: warn on synchronous request_module() from async workers") synchronous module loading from async is not allowed. Given that the original deadlock issue is fixed and it is no longer allowed to call synchronous request_module() from async we can remove PF_USED_ASYNC flag to make module init consistently invoke async_synchronize_full() unless async module probe is requested. Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Reviewed-by: Changyuan Lyu <changyuanl@google.com> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23nvme-rdma: fix possible use-after-free in transport error_recovery workSagi Grimberg
[ Upstream commit b6bb1722f34bbdbabed27acdceaf585d300c5fd2 ] While nvme_rdma_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23nvme: fix a possible use-after-free in controller reset during loadSagi Grimberg
[ Upstream commit 0fa0f99fc84e41057cbdd2efbfe91c6b2f47dd9d ] Unlike .queue_rq, in .submit_async_event drivers may not check the ctrl readiness for AER submission. This may lead to a use-after-free condition that was observed with nvme-tcp. The race condition may happen in the following scenario: 1. driver executes its reset_ctrl_work 2. -> nvme_stop_ctrl - flushes ctrl async_event_work 3. ctrl sends AEN which is received by the host, which in turn schedules AEN handling 4. teardown admin queue (which releases the queue socket) 5. AEN processed, submits another AER, calling the driver to submit 6. driver attempts to send the cmd ==> use-after-free In order to fix that, add ctrl state check to validate the ctrl is actually able to accept the AER submission. This addresses the above race in controller resets because the driver during teardown should: 1. change ctrl state to RESETTING 2. flush async_event_work (as well as other async work elements) So after 1,2, any other AER command will find the ctrl state to be RESETTING and bail out without submitting the AER. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23quota: make dquot_quota_sync return errors from ->sync_fsDarrick J. Wong
[ Upstream commit dd5532a4994bfda0386eb2286ec00758cee08444 ] Strangely, dquot_quota_sync ignores the return code from the ->sync_fs call, which means that quotacalls like Q_SYNC never see the error. This doesn't seem right, so fix that. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23vfs: make freeze_super abort when sync_filesystem returns errorDarrick J. Wong
[ Upstream commit 2719c7160dcfaae1f73a1c0c210ad3281c19022e ] If we fail to synchronize the filesystem while preparing to freeze the fs, abort the freeze. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23ax25: improve the incomplete fix to avoid UAF and NPD bugsDuoming Zhou
[ Upstream commit 4e0f718daf97d47cf7dec122da1be970f145c809 ] The previous commit 1ade48d0c27d ("ax25: NPD bug when detaching AX25 device") introduce lock_sock() into ax25_kill_by_device to prevent NPD bug. But the concurrency NPD or UAF bug will occur, when lock_sock() or release_sock() dereferences the ax25_cb->sock. The NULL pointer dereference bug can be shown as below: ax25_kill_by_device() | ax25_release() | ax25_destroy_socket() | ax25_cb_del() ... | ... | ax25->sk=NULL; lock_sock(s->sk); //(1) | s->ax25_dev = NULL; | ... release_sock(s->sk); //(2) | ... | The root cause is that the sock is set to null before dereference site (1) or (2). Therefore, this patch extracts the ax25_cb->sock in advance, and uses ax25_list_lock to protect it, which can synchronize with ax25_cb_del() and ensure the value of sock is not null before dereference sites. The concurrency UAF bug can be shown as below: ax25_kill_by_device() | ax25_release() | ax25_destroy_socket() ... | ... | sock_put(sk); //FREE lock_sock(s->sk); //(1) | s->ax25_dev = NULL; | ... release_sock(s->sk); //(2) | ... | The root cause is that the sock is released before dereference site (1) or (2). Therefore, this patch uses sock_hold() to increase the refcount of sock and uses ax25_list_lock to protect it, which can synchronize with ax25_cb_del() in ax25_destroy_socket() and ensure the sock wil not be released before dereference sites. Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-28 01:11:01 +0000