summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-02-27Linux 4.20.13v4.20.13Greg Kroah-Hartman
2019-02-27net: phylink: avoid resolving link state too earlyRussell King
commit 87454b6edc1b0143fdb3d9853285477e95af74a4 upstream. During testing on Armada 388 platforms, it was found with a certain module configuration that it was possible to trigger a kernel oops during the module load process, caused by the phylink resolver being triggered for a currently disabled interface. This problem was introduced by changing the way the SFP registration works, which now can result in the sfp link down notification being called during phylink_create(). Fixes: b5bfc21af5cb ("net: sfp: do not probe SFP module before we're attached") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27pinctrl: max77620: Use define directive for max77620_pinconf_param valuesNathan Chancellor
commit 1f60652dd586d1b3eee7c4602892a97a62fa937a upstream. Clang warns when one enumerated type is implicitly converted to another: drivers/pinctrl/pinctrl-max77620.c:56:12: warning: implicit conversion from enumeration type 'enum max77620_pinconf_param' to different enumeration type 'enum pin_config_param' [-Wenum-conversion] .param = MAX77620_ACTIVE_FPS_SOURCE, ^~~~~~~~~~~~~~~~~~~~~~~~~~ It is expected that pinctrl drivers can extend pin_config_param because of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion isn't an issue. Most drivers that take advantage of this define the PIN_CONFIG variables as constants, rather than enumerated values. Do the same thing here so that Clang no longer warns. Link: https://github.com/ClangBuiltLinux/linux/issues/139 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27netfilter: ipt_CLUSTERIP: fix sleep-in-atomic bug in ↵Taehee Yoo
clusterip_config_entry_put() commit 2a61d8b883bbad26b06d2e6cc3777a697e78830d upstream. A proc_remove() can sleep. so that it can't be inside of spin_lock. Hence proc_remove() is moved to outside of spin_lock. and it also adds mutex to sync create and remove of proc entry(config->pde). test commands: SHELL#1 %while :; do iptables -A INPUT -p udp -i enp2s0 -d 192.168.1.100 \ --dport 9000 -j CLUSTERIP --new --hashmode sourceip \ --clustermac 01:00:5e:00:00:21 --total-nodes 3 --local-node 3; \ iptables -F; done SHELL#2 %while :; do echo +1 > /proc/net/ipt_CLUSTERIP/192.168.1.100; \ echo -1 > /proc/net/ipt_CLUSTERIP/192.168.1.100; done [ 2949.569864] BUG: sleeping function called from invalid context at kernel/sched/completion.c:99 [ 2949.579944] in_atomic(): 1, irqs_disabled(): 0, pid: 5472, name: iptables [ 2949.587920] 1 lock held by iptables/5472: [ 2949.592711] #0: 000000008f0ebcf2 (&(&cn->lock)->rlock){+...}, at: refcount_dec_and_lock+0x24/0x50 [ 2949.603307] CPU: 1 PID: 5472 Comm: iptables Tainted: G W 4.19.0-rc5+ #16 [ 2949.604212] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015 [ 2949.604212] Call Trace: [ 2949.604212] dump_stack+0xc9/0x16b [ 2949.604212] ? show_regs_print_info+0x5/0x5 [ 2949.604212] ___might_sleep+0x2eb/0x420 [ 2949.604212] ? set_rq_offline.part.87+0x140/0x140 [ 2949.604212] ? _rcu_barrier_trace+0x400/0x400 [ 2949.604212] wait_for_completion+0x94/0x710 [ 2949.604212] ? wait_for_completion_interruptible+0x780/0x780 [ 2949.604212] ? __kernel_text_address+0xe/0x30 [ 2949.604212] ? __lockdep_init_map+0x10e/0x5c0 [ 2949.604212] ? __lockdep_init_map+0x10e/0x5c0 [ 2949.604212] ? __init_waitqueue_head+0x86/0x130 [ 2949.604212] ? init_wait_entry+0x1a0/0x1a0 [ 2949.604212] proc_entry_rundown+0x208/0x270 [ 2949.604212] ? proc_reg_get_unmapped_area+0x370/0x370 [ 2949.604212] ? __lock_acquire+0x4500/0x4500 [ 2949.604212] ? complete+0x18/0x70 [ 2949.604212] remove_proc_subtree+0x143/0x2a0 [ 2949.708655] ? remove_proc_entry+0x390/0x390 [ 2949.708655] clusterip_tg_destroy+0x27a/0x630 [ipt_CLUSTERIP] [ ... ] Fixes: b3e456fce9f5 ("netfilter: ipt_CLUSTERIP: fix a race condition of proc file creation") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27netfilter: nfnetlink_osf: add missing fmatch checkFernando Fernandez Mancera
commit 1a6a0951fc009f6d9fe8ebea2d2417d80d54097b upstream. When we check the tcp options of a packet and it doesn't match the current fingerprint, the tcp packet option pointer must be restored to its initial value in order to do the proper tcp options check for the next fingerprint. Here we can see an example. Assumming the following fingerprint base with two lines: S10:64:1:60:M*,S,T,N,W6: Linux:3.0::Linux 3.0 S20:64:1:60:M*,S,T,N,W7: Linux:4.19:arch:Linux 4.1 Where TCP options are the last field in the OS signature, all of them overlap except by the last one, ie. 'W6' versus 'W7'. In case a packet for Linux 4.19 kicks in, the osf finds no matching because the TCP options pointer is updated after checking for the TCP options in the first line. Therefore, reset pointer back to where it should be. Fixes: 11eeef41d5f6 ("netfilter: passive OS fingerprint xtables match") Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27netfilter: ipv6: Don't preserve original oif for loopback addressEli Cooper
commit 15df03c661cb362366ecfc3a21820cb934f3e4ca upstream. Commit 508b09046c0f ("netfilter: ipv6: Preserve link scope traffic original oif") made ip6_route_me_harder() keep the original oif for link-local and multicast packets. However, it also affected packets for the loopback address because it used rt6_need_strict(). REDIRECT rules in the OUTPUT chain rewrite the destination to loopback address; thus its oif should not be preserved. This commit fixes the bug that redirected local packets are being dropped. Actually the packet was not exactly dropped; Instead it was sent out to the original oif rather than lo. When a packet with daddr ::1 is sent to the router, it is effectively dropped. Fixes: 508b09046c0f ("netfilter: ipv6: Preserve link scope traffic original oif") Signed-off-by: Eli Cooper <elicooper@gmx.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27netfilter: nft_compat: use-after-free when deleting targetsPablo Neira Ayuso
commit 753c111f655e38bbd52fc01321266633f022ebe2 upstream. Fetch pointer to module before target object is released. Fixes: 29e3880109e3 ("netfilter: nf_tables: fix use-after-free when deleting compat expressions") Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27netfilter: nf_tables: fix flush after rule deletion in the same batchPablo Neira Ayuso
commit 23b7ca4f745f21c2b9cfcb67fdd33733b3ae7e66 upstream. Flush after rule deletion bogusly hits -ENOENT. Skip rules that have been already from nft_delrule_by_chain() which is always called from the flush path. Fixes: cf9dc09d0949 ("netfilter: nf_tables: fix missing rules flushing per table") Reported-by: Phil Sutter <phil@nwl.cc> Acked-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27Revert "bridge: do not add port to router list when receives query with ↵Hangbin Liu
source 0.0.0.0" commit 278e2148c07559dd4ad8602f22366d61eb2ee7b7 upstream. This reverts commit 5a2de63fd1a5 ("bridge: do not add port to router list when receives query with source 0.0.0.0") and commit 0fe5119e267f ("net: bridge: remove ipv6 zero address check in mcast queries") The reason is RFC 4541 is not a standard but suggestive. Currently we will elect 0.0.0.0 as Querier if there is no ip address configured on bridge. If we do not add the port which recives query with source 0.0.0.0 to router list, the IGMP reports will not be about to forward to Querier, IGMP data will also not be able to forward to dest. As Nikolay suggested, revert this change first and add a boolopt api to disable none-zero election in future if needed. Reported-by: Linus Lüssing <linus.luessing@c0d3.blue> Reported-by: Sebastian Gottschall <s.gottschall@newmedia-net.de> Fixes: 5a2de63fd1a5 ("bridge: do not add port to router list when receives query with source 0.0.0.0") Fixes: 0fe5119e267f ("net: bridge: remove ipv6 zero address check in mcast queries") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27staging: erofs: unzip_vle_lz4.c,utils.c: rectify BUG_ONsGao Xiang
commit b8e076a6ef253e763bfdb81e5c72bcc828b0fbeb upstream. remove all redundant BUG_ONs, and turn the rest useful usages to DBG_BUGONs. Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27staging: erofs: unzip_{pagevec.h,vle.c}: rectify BUG_ONsGao Xiang
commit 70b17991d89554cdd16f3e4fb0179bcc03c808d9 upstream. remove all redundant BUG_ONs, and turn the rest useful usages to DBG_BUGONs. Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27staging: erofs: {dir,inode,super}.c: rectify BUG_ONsGao Xiang
commit 8b987bca2d09649683cbe496419a011df8c08493 upstream. remove all redundant BUG_ONs, and turn the rest useful usages to DBG_BUGONs. Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27staging: erofs: add a full barrier in erofs_workgroup_unfreezeGao Xiang
commit 948bbdb1818b7ad6e539dad4fbd2dd4650793ea9 upstream. Just like other generic locks, insert a full barrier in case of memory reorder. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27staging: erofs: fix `erofs_workgroup_{try_to_freeze, unfreeze}'Gao Xiang
commit 73f5c66df3e26ab750cefcb9a3e08c71c9f79cad upstream. There are two minor issues in the current freeze interface: 1) Freeze interfaces have not related with CONFIG_DEBUG_SPINLOCK, therefore fix the incorrect conditions; 2) For SMP platforms, it should also disable preemption before doing atomic_cmpxchg in case that some high priority tasks preempt between atomic_cmpxchg and disable_preempt, then spin on the locked refcount later. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27staging: erofs: atomic_cond_read_relaxed on ref-locked workgroupGao Xiang
commit df134b8d17b90c1e7720e318d36416b57424ff7a upstream. It's better to use atomic_cond_read_relaxed, which is implemented in hardware instructions to monitor a variable changes currently for ARM64, instead of open-coded busy waiting. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27staging: erofs: remove the redundant d_rehash() for the root dentryGao Xiang
commit e9c892465583c8f42d61fafe30970d36580925df upstream. There is actually no need at all to d_rehash() for the root dentry as Al pointed out, fix it. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27net: avoid false positives in untrusted gso validationWillem de Bruijn
commit 9e8db5913264d3967b93c765a6a9e464d9c473db upstream. GSO packets with vnet_hdr must conform to a small set of gso_types. The below commit uses flow dissection to drop packets that do not. But it has false positives when the skb is not fully initialized. Dissection needs skb->protocol and skb->network_header. Infer skb->protocol from gso_type as the two must agree. SKB_GSO_UDP can use both ipv4 and ipv6, so try both. Exclude callers for which network header offset is not known. Fixes: d5be7f632bad ("net: validate untrusted gso packets without csum offload") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27net: validate untrusted gso packets without csum offloadWillem de Bruijn
commit d5be7f632bad0f489879eed0ff4b99bd7fe0b74c upstream. Syzkaller again found a path to a kernel crash through bad gso input. By building an excessively large packet to cause an skb field to wrap. If VIRTIO_NET_HDR_F_NEEDS_CSUM was set this would have been dropped in skb_partial_csum_set. GSO packets that do not set checksum offload are suspicious and rare. Most callers of virtio_net_hdr_to_skb already pass them to skb_probe_transport_header. Move that test forward, change it to detect parse failure and drop packets on failure as those cleary are not one of the legitimate VIRTIO_NET_HDR_GSO types. Fixes: bfd5f4a3d605 ("packet: Add GSO/csum offload support.") Fixes: f43798c27684 ("tun: Allow GSO using virtio_net_hdr") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27ASoC: soc-core: fix init platform memory handlingCurtis Malainey
commit 09ac6a817bd687e7f5dac00470262efdd72f9319 upstream. snd_soc_init_platform initializes pointers to snd_soc_dai_link which is statically allocated and it does this by devm_kzalloc. In the event of an EPROBE_DEFER the memory will be freed and the pointers are left dangling. snd_soc_init_platform sees the dangling pointers and assumes they are pointing to initialized memory and does not reallocate them on the second probe attempt which results in a use after free bug since devm has freed the memory from the first probe attempt. Since the intention for snd_soc_dai_link->platform is that it can be set statically by the machine driver we need to respect the pointer in the event we did not set it but still catch dangling pointers. The solution is to add a flag to track whether the pointer was dynamically allocated or not. Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27s390: vsie: Use effective CRYCBD.31 to check CRYCBD validityPierre Morel
commit b10bd9a256aec504c14a7c9b6fccb6301ecf290a upstream. When facility.76 MSAX3 is present for the guest we must issue a validity interception if the CRYCBD is not valid. The bit CRYCBD.31 is an effective field and tested at each guest level and has for effect to mask the facility.76 It follows that if CRYCBD.31 is clear and AP is not in use we do not have to test the CRYCBD validatity even if facility.76 is present in the host. Fixes: 6ee74098201b ("KVM: s390: vsie: allow CRYCB FORMAT-0") Cc: stable@vger.kernel.org Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <1549876849-32680-1-git-send-email-pmorel@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27kvm: x86: Return LA57 feature based on hardware capabilityYu Zhang
commit 511da98d207d5c0675a10351b01e37cbe50a79e5 upstream. Previously, 'commit 372fddf70904 ("x86/mm: Introduce the 'no5lvl' kernel parameter")' cleared X86_FEATURE_LA57 in boot_cpu_data, if Linux chooses to not run in 5-level paging mode. Yet boot_cpu_data is queried by do_cpuid_ent() as the host capability later when creating vcpus, and Qemu will not be able to detect this feature and create VMs with LA57 feature. As discussed earlier, VMs can still benefit from extended linear address width, e.g. to enhance features like ASLR. So we would like to fix this, by return the true hardware capability when Qemu queries. Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27x86/kvm/mmu: fix switch between root and guest MMUsVitaly Kuznetsov
commit ad7dc69aeb23138cc23c406cac25003b97e8ee17 upstream. Commit 14c07ad89f4d ("x86/kvm/mmu: introduce guest_mmu") brought one subtle change: previously, when switching back from L2 to L1, we were resetting MMU hooks (like mmu->get_cr3()) in kvm_init_mmu() called from nested_vmx_load_cr3() and now we do that in nested_ept_uninit_mmu_context() when we re-target vcpu->arch.mmu pointer. The change itself looks logical: if nested_ept_init_mmu_context() changes something than nested_ept_uninit_mmu_context() restores it back. There is, however, one thing: the following call chain: nested_vmx_load_cr3() kvm_mmu_new_cr3() __kvm_mmu_new_cr3() fast_cr3_switch() cached_root_available() now happens with MMU hooks pointing to the new MMU (root MMU in our case) while previously it was happening with the old one. cached_root_available() tries to stash current root but it is incorrect to read current CR3 with mmu->get_cr3(), we need to use old_mmu->get_cr3() which in case we're switching from L2 to L1 is guest_mmu. (BTW, in shadow page tables case this is a non-issue because we don't switch MMU). While we could've tried to guess that we're switching between MMUs and call the right ->get_cr3() from cached_root_available() this seems to be overly complicated. Instead, just stash the corresponding CR3 when setting root_hpa and make cached_root_available() use the stashed value. Fixes: 14c07ad89f4d ("x86/kvm/mmu: introduce guest_mmu") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27KVM: MMU: record maximum physical address width in kvm_mmu_extended_roleYu Zhang
commit de3ccd26fafc707b09792d9b633c8b5b48865315 upstream. Previously, commit 7dcd57552008 ("x86/kvm/mmu: check if tdp/shadow MMU reconfiguration is needed") offered some optimization to avoid the unnecessary reconfiguration. Yet one scenario is broken - when cpuid changes VM's maximum physical address width, reconfiguration is needed to reset the reserved bits. Also, the TDP may need to reset its shadow_root_level when this value is changed. To fix this, a new field, maxphyaddr, is introduced in the extended role structure to keep track of the configured guest physical address width. Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27mac80211: allocate tailroom for forwarded mesh packetsFelix Fietkau
commit 51d0af222f6fa43134c6187ab4f374630f6e0d96 upstream. Forwarded packets enter the tx path through ieee80211_add_pending_skb, which skips the ieee80211_skb_resize call. Fixes WARN_ON in ccmp_encrypt_skb and resulting packet loss. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27mac80211: Change default tx_sk_pacing_shift to 7Toke Høiland-Jørgensen
commit 5c14a4d05f68415af9e41a4e667d1748d41d1baf upstream. When we did the original tests for the optimal value of sk_pacing_shift, we came up with 6 ms of buffering as the default. Sadly, 6 is not a power of two, so when picking the shift value I erred on the size of less buffering and picked 4 ms instead of 8. This was probably wrong; those 2 ms of extra buffering makes a larger difference than I thought. So, change the default pacing shift to 7, which corresponds to 8 ms of buffering. The point of diminishing returns really kicks in after 8 ms, and so having this as a default should cut down on the need for extensive per-device testing and overrides needed in the drivers. Cc: stable@vger.kernel.org Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27drm/amd/display: Fix MST reboot/poweroff sequenceLeo (Hanghong) Ma
commit d2f0b53bda3193874f3905bc839888f895d1c0cf upstream. [Why] drm_dp_mst_topology_mgr_suspend() is added into the new reboot sequence, which disables the UP request at the beginning. Therefore sideband messages are blocked. [How] Finish MST sideband message transaction before UP request is suppressed. Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27drm/amdgpu: disable bulk moves for nowChristian König
commit a213c2c7e235cfc0e0a161a558f7fdf2fb3a624a upstream. The changes to fix those are two invasive for backporting. Just disable the feature in 4.20 and 5.0. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Cc: <stable@vger.kernel.org> [4.20+] Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27drm/i915/fbdev: Actually configure untiled displaysChris Wilson
commit d179b88deb3bf6fed4991a31fd6f0f2cad21fab5 upstream. If we skipped all the connectors that were not part of a tile, we would leave conn_seq=0 and conn_configured=0, convincing ourselves that we had stagnated in our configuration attempts. Avoid this situation by starting conn_seq=ALL_CONNECTORS, and repeating until we find no more connectors to configure. Fixes: 754a76591b12 ("drm/i915/fbdev: Stop repeating tile configuration on stagnation") Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190215123019.32283-1-chris@chris-wilson.co.uk Cc: <stable@vger.kernel.org> # v3.19+ (cherry picked from commit d9b308b1f8a1acc0c3279f443d4fe0f9f663252e) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27gpu: drm: radeon: Set DPM_FLAG_NEVER_SKIP when enabling PM-runtimeRafael J. Wysocki
commit 450d007d199e632a1a4c4b91302deacd7d56815f upstream. On HP ProBook 4540s, if PM-runtime is enabled in the radeon driver and the direct-complete optimization is used for the radeon device during system-wide suspend, the system doesn't resume. Preventing direct-complete from being used with the radeon device by setting the DPM_FLAG_NEVER_SKIP driver flag for it makes the problem go away, which indicates that direct-complete is not safe for the radeon driver in general and should not be used with it (at least for now). This fixes a regression introduced by commit c62ec4610c40 ("PM / core: Fix direct_complete handling for devices with no callbacks") which allowed direct-complete to be applied to devices without PM callbacks (again) which in turn unlocked direct-complete for radeon on HP ProBook 4540s. Fixes: c62ec4610c40 ("PM / core: Fix direct_complete handling for devices with no callbacks") Link: https://bugzilla.kernel.org/show_bug.cgi?id=201519 Reported-by: Ярослав Семченко <ukrkyi@gmail.com> Tested-by: Ярослав Семченко <ukrkyi@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27drm/amdgpu: Set DPM_FLAG_NEVER_SKIP when enabling PM-runtimeAlex Deucher
commit d33158530660bc89be3cc870a2152e4e9a76cac7 upstream. Based on a similar patch from Rafael for radeon. When using ATPX to control dGPU power, the state is not retained across suspend and resume cycles by default. This can probably be loosened for Hybrid Graphics (_PR3) laptops where I think the state is properly retained. Fixes: c62ec4610c40 ("PM / core: Fix direct_complete handling for devices with no callbacks") Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27cpufreq: scmi: Fix use-after-free in scmi_cpufreq_exit()Yangtao Li
commit 8cbd468bdeb5ed3acac2d7a9f7494d5b77e46297 upstream. This issue was detected with the help of Coccinelle. So change the order of function calls to fix it. Fixes: 1690d8bb91e37 (cpufreq: scpi/scmi: Fix freeing of dynamic OPPs) Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Cc: 4.20+ <stable@vger.kernel.org> # 4.20+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27ARC: define ARCH_SLAB_MINALIGN = 8Alexey Brodkin
commit b6835ea77729e7faf4656ca637ba53f42b8ee3fd upstream. The default value of ARCH_SLAB_MINALIGN in "include/linux/slab.h" is "__alignof__(unsigned long long)" which for ARC unexpectedly turns out to be 4. This is not a compiler bug, but as defined by ARC ABI [1] Thus slab allocator would allocate a struct which is 32-bit aligned, which is generally OK even if struct has long long members. There was however potetial problem when it had any atomic64_t which use LLOCKD/SCONDD instructions which are required by ISA to take 64-bit addresses. This is the problem we ran into [ 4.015732] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 4.167881] Misaligned Access [ 4.172356] Path: /bin/busybox.nosuid [ 4.176004] CPU: 2 PID: 171 Comm: rm Not tainted 4.19.14-yocto-standard #1 [ 4.182851] [ 4.182851] [ECR ]: 0x000d0000 => Check Programmer's Manual [ 4.190061] [EFA ]: 0xbeaec3fc [ 4.190061] [BLINK ]: ext4_delete_entry+0x210/0x234 [ 4.190061] [ERET ]: ext4_delete_entry+0x13e/0x234 [ 4.202985] [STAT32]: 0x80080002 : IE K [ 4.207236] BTA: 0x9009329c SP: 0xbe5b1ec4 FP: 0x00000000 [ 4.212790] LPS: 0x9074b118 LPE: 0x9074b120 LPC: 0x00000000 [ 4.218348] r00: 0x00000040 r01: 0x00000021 r02: 0x00000001 ... ... [ 4.270510] Stack Trace: [ 4.274510] ext4_delete_entry+0x13e/0x234 [ 4.278695] ext4_rmdir+0xe0/0x238 [ 4.282187] vfs_rmdir+0x50/0xf0 [ 4.285492] do_rmdir+0x9e/0x154 [ 4.288802] EV_Trap+0x110/0x114 The fix is to make sure slab allocations are 64-bit aligned. Do note that atomic64_t is __attribute__((aligned(8)) which means gcc does generate 64-bit aligned references, relative to beginning of container struct. However the issue is if the container itself is not 64-bit aligned, atomic64_t ends up unaligned which is what this patch ensures. [1] https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/wiki/files/ARCv2_ABI.pdf Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: <stable@vger.kernel.org> # 4.8+ Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: reworked changelog, added dependency on LL64+LLSC] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27ARC: U-boot: check arguments paranoidlyEugeniy Paltsev
commit a66f2e57bd566240d8b3884eedf503928fbbe557 upstream. Handle U-boot arguments paranoidly: * don't allow to pass unknown tag. * try to use external device tree blob only if corresponding tag (TAG_DTB) is set. * don't check uboot_tag if kernel build with no ARC_UBOOT_SUPPORT. NOTE: If U-boot args are invalid we skip them and try to use embedded device tree blob. We can't panic on invalid U-boot args as we really pass invalid args due to bug in U-boot code. This happens if we don't provide external DTB to U-boot and don't set 'bootargs' U-boot environment variable (which is default case at least for HSDK board) In that case we will pass {r0 = 1 (bootargs in r2); r1 = 0; r2 = 0;} to linux which is invalid. While I'm at it refactor U-boot arguments handling code. Cc: stable@vger.kernel.org Tested-by: Corentin LABBE <clabbe@baylibre.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27ARCv2: Enable unaligned access in early ASM codeEugeniy Paltsev
commit 252f6e8eae909bc075a1b1e3b9efb095ae4c0b56 upstream. It is currently done in arc_init_IRQ() which might be too late considering gcc 7.3.1 onwards (GNU 2018.03) generates unaligned memory accesses by default Cc: stable@vger.kernel.org #4.4+ Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: rewrote changelog] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27parisc: Fix ptrace syscall number modificationDmitry V. Levin
commit b7dc5a071ddf69c0350396b203cba32fe5bab510 upstream. Commit 910cd32e552e ("parisc: Fix and enable seccomp filter support") introduced a regression in ptrace-based syscall tampering: when tracer changes syscall number to -1, the kernel fails to initialize %r28 with -ENOSYS and subsequently fails to return the error code of the failed syscall to userspace. This erroneous behaviour could be observed with a simple strace syscall fault injection command which is expected to print something like this: $ strace -a0 -ewrite -einject=write:error=enospc echo hello write(1, "hello\n", 6) = -1 ENOSPC (No space left on device) (INJECTED) write(2, "echo: ", 6) = -1 ENOSPC (No space left on device) (INJECTED) write(2, "write error", 11) = -1 ENOSPC (No space left on device) (INJECTED) write(2, "\n", 1) = -1 ENOSPC (No space left on device) (INJECTED) +++ exited with 1 +++ After commit 910cd32e552ea09caa89cdbe328e468979b030dd it loops printing something like this instead: write(1, "hello\n", 6../strace: Failed to tamper with process 12345: unexpectedly got no error (return value 0, error 0) ) = 0 (INJECTED) This bug was found by strace test suite. Fixes: 910cd32e552e ("parisc: Fix and enable seccomp filter support") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Tested-by: Helge Deller <deller@gmx.de> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27clk: at91: fix at91sam9x5 peripheral clock numberAlexandre Belloni
commit 1b328a2e095a009518ebac05e937cc0fc242fede upstream. nck() looks at the last id in an array and unfortunately, at91sam9x35_periphck has a sentinel, hence the id is 0 and the calculated number of peripheral clocks is 1 instead of a maximum of 31. Fixes: 1eabdc2f9dd8 ("clk: at91: add at91sam9x5 PMCs driver") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: <stable@vger.kernel.org> # v4.20+ Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27clk: at91: fix masterck nameAlexandre Belloni
commit 65a91e2e597dea62a798a8b771edc44859037e7f upstream. The master clock is actually named masterck earlier in the driver. Having "mck" in the parent list means that it can never be selected. Fixes: 1eabdc2f9dd8 ("clk: at91: add at91sam9x5 PMCs driver") Fixes: a2038077de9a ("clk: at91: add sama5d2 PMC driver") Fixes: 084b696bb509 ("clk: at91: add sama5d4 pmc driver") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: <stable@vger.kernel.org> # v4.20+ Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27KEYS: always initialize keyring_index_key::desc_lenEric Biggers
commit ede0fa98a900e657d1fcd80b50920efc896c1a4c upstream. syzbot hit the 'BUG_ON(index_key->desc_len == 0);' in __key_link_begin() called from construct_alloc_key() during sys_request_key(), because the length of the key description was never calculated. The problem is that we rely on ->desc_len being initialized by search_process_keyrings(), specifically by search_nested_keyrings(). But, if the process isn't subscribed to any keyrings that never happens. Fix it by always initializing keyring_index_key::desc_len as soon as the description is set, like we already do in some places. The following program reproduces the BUG_ON() when it's run as root and no session keyring has been installed. If it doesn't work, try removing pam_keyinit.so from /etc/pam.d/login and rebooting. #include <stdlib.h> #include <unistd.h> #include <keyutils.h> int main(void) { int id = add_key("keyring", "syz", NULL, 0, KEY_SPEC_USER_KEYRING); keyctl_setperm(id, KEY_OTH_WRITE); setreuid(5000, 5000); request_key("user", "desc", "", id); } Reported-by: syzbot+ec24e95ea483de0a24da@syzkaller.appspotmail.com Fixes: b2a4df200d57 ("KEYS: Expand the capacity of a keyring") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: James Morris <james.morris@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27KEYS: user: Align the payload bufferEric Biggers
commit cc1780fc42c76c705dd07ea123f1143dc5057630 upstream. Align the payload of "user" and "logon" keys so that users of the keyrings service can access it as a struct that requires more than 2-byte alignment. fscrypt currently does this which results in the read of fscrypt_key::size being misaligned as it needs 4-byte alignment. Align to __alignof__(u64) rather than __alignof__(long) since in the future it's conceivable that people would use structs beginning with u64, which on some platforms would require more than 'long' alignment. Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Fixes: 2aa349f6e37c ("[PATCH] Keys: Export user-defined keyring operations") Fixes: 88bd6ccdcdd6 ("ext4 crypto: add encryption key management facilities") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.morris@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27RDMA/srp: Rework SCSI device reset handlingBart Van Assche
commit 48396e80fb6526ea5ed267bd84f028bae56d2f9e upstream. Since .scsi_done() must only be called after scsi_queue_rq() has finished, make sure that the SRP initiator driver does not call .scsi_done() while scsi_queue_rq() is in progress. Although invoking sg_reset -d while I/O is in progress works fine with kernel v4.20 and before, that is not the case with kernel v5.0-rc1. This patch avoids that the following crash is triggered with kernel v5.0-rc1: BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 CPU: 0 PID: 360 Comm: kworker/0:1H Tainted: G B 5.0.0-rc1-dbg+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:blk_mq_dispatch_rq_list+0x116/0xb10 Call Trace: blk_mq_sched_dispatch_requests+0x2f7/0x300 __blk_mq_run_hw_queue+0xd6/0x180 blk_mq_run_work_fn+0x27/0x30 process_one_work+0x4f1/0xa20 worker_thread+0x67/0x5b0 kthread+0x1cf/0x1f0 ret_from_fork+0x24/0x30 Cc: <stable@vger.kernel.org> Fixes: 94a9174c630c ("IB/srp: reduce lock coverage of command completion") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27scsi: sd_zbc: Fix sd_zbc_report_zones() buffer allocationMasato Suzuki
commit 515ce60613128be7a176a8b82b20c7624f3b440d upstream. The function sd_zbc_do_report_zones() issues a REPORT ZONES command with a buffer size calculated based on the number of zones requested by the caller. This value should however not exceed the capabilities of the hardware maximum command size, that is, should not exceed the max_hw_sectors limit of the device. This problem leads to failures of report zones commands when re-validating disks with some SAS HBAs. Fix this by limiting a report zone command buffer size to the minimum of the device max_hw_sectors and calculated value based on the requested number of zones. This does not change the semantic of the report_zones file operation as report zones can always return less zone reports than requested. Short reports are handled using a loop execution of the report_zones file operation in the function blk_report_zones(). [Damien] Before patch 'e76239a3748c ("block: add a report_zones method")', report zones buffer allocation was limited to max_sectors when allocated in blk_report_zones(). This however does not consider the actual format of the device reply which is interface dependent. Limiting the allocation based on the size of the expected reply format rather than the size of the array of generic sturct blkzone passed by blk_report_zones() makes more sense. Fixes: e76239a3748c ("block: add a report_zones method") Cc: stable@vger.kernel.org Signed-off-by: Masato Suzuki <masato.suzuki@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27net/mlx5e: XDP, fix redirect resources availability checkSaeed Mahameed
[ Upstream commit 407e17b1a69a51ba9a512a04342da56c1f931df4 ] Currently mlx5 driver creates xdp redirect hw queues unconditionally on netdevice open, This is great until someone starts redirecting XDP traffic via ndo_xdp_xmit on mlx5 device and changes the device configuration at the same time, this might cause crashes, since the other device's napi is not aware of the mlx5 state change (resources un-availability). To fix this we must synchronize with other devices napi's on the system. Added a new flag under mlx5e_priv to determine XDP TX resources are available, set/clear it up when necessary and use synchronize_rcu() when the flag is turned off, so other napi's are in-sync with it, before we actually cleanup the hw resources. The flag is tested prior to committing to transmit on mlx5e_xdp_xmit, and it is sufficient to determine if it safe to transmit or not. The other two internal flags (MLX5E_STATE_OPENED and MLX5E_SQ_STATE_ENABLED) become unnecessary. Thus, they are removed from data path. Fixes: 58b99ee3e3eb ("net/mlx5e: Add support for XDP_REDIRECT in device-out side") Reported-by: Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27net/mlx5e: FPGA, fix Innova IPsec TX offload data path performanceRaed Salem
[ Upstream commit 82eaa1fa0448da1852d7b80832e67e80a08dcc27 ] At Innova IPsec TX offload data path a special software parser metadata is used to pass some packet attributes to the hardware, this metadata is passed using the Ethernet control segment of a WQE (a HW descriptor) header. The cited commit might nullify this header, hence the metadata is lost, this caused a significant performance drop during hw offloading operation. Fix by restoring the metadata at the Ethernet control segment in case it was nullified. Fixes: 37fdffb217a4 ("net/mlx5: WQ, fixes for fragmented WQ buffers API") Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27net_sched: fix two more memory leaks in cls_tcindexCong Wang
[ Upstream commit 1db817e75f5b9387b8db11e37d5f0624eb9223e0 ] struct tcindex_filter_result contains two parts: struct tcf_exts and struct tcf_result. For the local variable 'cr', its exts part is never used but initialized without being released properly on success path. So just completely remove the exts part to fix this leak. For the local variable 'new_filter_result', it is never properly released if not used by 'r' on success path. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27net_sched: fix a memory leak in cls_tcindexCong Wang
[ Upstream commit 033b228e7f26b29ae37f8bfa1bc6b209a5365e9f ] When tcindex_destroy() destroys all the filter results in the perfect hash table, it invokes the walker to delete each of them. However, results with class==0 are skipped in either tcindex_walk() or tcindex_delete(), which causes a memory leak reported by kmemleak. This patch fixes it by skipping the walker and directly deleting these filter results so we don't miss any filter result. As a result of this change, we have to initialize exts->net properly in tcindex_alloc_perfect_hash(). For net-next, we need to consider whether we should initialize ->net in tcf_exts_init() instead, before that just directly test CONFIG_NET_CLS_ACT=y. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27net_sched: fix a race condition in tcindex_destroy()Cong Wang
[ Upstream commit 8015d93ebd27484418d4952284fd02172fa4b0b2 ] tcindex_destroy() invokes tcindex_destroy_element() via a walker to delete each filter result in its perfect hash table, and tcindex_destroy_element() calls tcindex_delete() which schedules tcf RCU works to do the final deletion work. Unfortunately this races with the RCU callback __tcindex_destroy(), which could lead to use-after-free as reported by Adrian. Fix this by migrating this RCU callback to tcf RCU work too, as that workqueue is ordered, we will not have use-after-free. Note, we don't need to hold netns refcnt because we don't call tcf_exts_destroy() here. Fixes: 27ce4f05e2ab ("net_sched: use tcf_queue_work() in tcindex filter") Reported-by: Adrian <bugs@abtelecom.ro> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()Hangbin Liu
[ Upstream commit 173656accaf583698bac3f9e269884ba60d51ef4 ] If we disabled IPv6 from the kernel command line (ipv6.disable=1), we should not call ip6_err_gen_icmpv6_unreach(). This: ip link add sit1 type sit local 192.0.2.1 remote 192.0.2.2 ttl 1 ip link set sit1 up ip addr add 198.51.100.1/24 dev sit1 ping 198.51.100.2 if IPv6 is disabled at boot time, will crash the kernel. v2: there's no need to use in6_dev_get(), use __in6_dev_get() instead, as we only need to check that idev exists and we are under rcu_read_lock() (from netif_receive_skb_internal()). Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: ca15a078bd90 ("sit: generate icmpv6 error when receiving icmpv4 error") Cc: Oussama Ghorbel <ghorbel@pivasoftware.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27geneve: should not call rt6_lookup() when ipv6 was disabledHangbin Liu
[ Upstream commit c0a47e44c0980b3b23ee31fa7936d70ea5dce491 ] When we add a new GENEVE device with IPv6 remote, checking only for IS_ENABLED(CONFIG_IPV6) is not enough as we may disable IPv6 in the kernel command line (ipv6.disable=1), and calling rt6_lookup() would cause a NULL pointer dereference. v2: - don't mix declarations and code (reported by Stefano Brivio, Eric Dumazet) - there's no need to use in6_dev_get() as we only need to check that idev exists (reported by David Ahern). This is under RTNL, so we can simply use __in6_dev_get() instead (Stefano, Eric). Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: c40e89fd358e9 ("geneve: configure MTU based on a lower device") Cc: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27net: socket: make bond ioctls go through compat_ifreq_ioctl()Johannes Berg
[ Upstream commit 98406133dd9cb9f195676eab540c270dceca879a ] Same story as before, these use struct ifreq and thus need to be read with the shorter version to not cause faults. Cc: stable@vger.kernel.org Fixes: f92d4fc95341 ("kill bond_ioctl()") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27net: socket: fix SIOCGIFNAME in compatJohannes Berg
[ Upstream commit c6c9fee35dc27362b7bac34b2fc9f5b8ace2e22c ] As reported by Robert O'Callahan in https://bugzilla.kernel.org/show_bug.cgi?id=202273 reverting the previous changes in this area broke the SIOCGIFNAME ioctl in compat again (I'd previously fixed it after his previous report of breakage in https://bugzilla.kernel.org/show_bug.cgi?id=199469). This is obviously because I fixed SIOCGIFNAME more or less by accident. Fix it explicitly now by making it pass through the restored compat translation code. Cc: stable@vger.kernel.org Fixes: 4cf808e7ac32 ("kill dev_ifname32()") Reported-by: Robert O'Callahan <robert@ocallahan.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-27 16:28:47 +0000