summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-02-17Linux 6.6.78v6.6.78Greg Kroah-Hartman
Link: https://lore.kernel.org/r/20250213142407.354217048@linuxfoundation.org Tested-by: SeongJae Park <sj@kernel.org> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Mark Brown <broonie@kernel.org> Tested-by: Hardik Garg <hargar@linux.microsoft.com> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Tested-By: Achill Gilgenast <fossdd@pwned.life> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17KVM: x86: Re-split x2APIC ICR into ICR+ICR2 for AMD (x2AVIC)Sean Christopherson
commit 73b42dc69be8564d4951a14d00f827929fe5ef79 upstream. Re-introduce the "split" x2APIC ICR storage that KVM used prior to Intel's IPI virtualization support, but only for AMD. While not stated anywhere in the APM, despite stating the ICR is a single 64-bit register, AMD CPUs store the 64-bit ICR as two separate 32-bit values in ICR and ICR2. When IPI virtualization (IPIv on Intel, all AVIC flavors on AMD) is enabled, KVM needs to match CPU behavior as some ICR ICR writes will be handled by the CPU, not by KVM. Add a kvm_x86_ops knob to control the underlying format used by the CPU to store the x2APIC ICR, and tune it to AMD vs. Intel regardless of whether or not x2AVIC is enabled. If KVM is handling all ICR writes, the storage format for x2APIC mode doesn't matter, and having the behavior follow AMD versus Intel will provide better test coverage and ease debugging. Fixes: 4d1d7942e36a ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode") Cc: stable@vger.kernel.org Cc: Maxim Levitsky <mlevitsk@redhat.com> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Link: https://lore.kernel.org/r/20240719235107.3023592-4-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> [JH: fixed conflict with vmx_x86_ops reshuffle due to missing commit 5f18c642ff7e2] Signed-off-by: James Houghton <jthoughton@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17KVM: x86: Make x2APIC ID 100% readonlySean Christopherson
commit 4b7c3f6d04bd53f2e5b228b6821fb8f5d1ba3071 upstream. Ignore the userspace provided x2APIC ID when fixing up APIC state for KVM_SET_LAPIC, i.e. make the x2APIC fully readonly in KVM. Commit a92e2543d6a8 ("KVM: x86: use hardware-compatible format for APIC ID register"), which added the fixup, didn't intend to allow userspace to modify the x2APIC ID. In fact, that commit is when KVM first started treating the x2APIC ID as readonly, apparently to fix some race: static inline u32 kvm_apic_id(struct kvm_lapic *apic) { - return (kvm_lapic_get_reg(apic, APIC_ID) >> 24) & 0xff; + /* To avoid a race between apic_base and following APIC_ID update when + * switching to x2apic_mode, the x2apic mode returns initial x2apic id. + */ + if (apic_x2apic_mode(apic)) + return apic->vcpu->vcpu_id; + + return kvm_lapic_get_reg(apic, APIC_ID) >> 24; } Furthermore, KVM doesn't support delivering interrupts to vCPUs with a modified x2APIC ID, but KVM *does* return the modified value on a guest RDMSR and for KVM_GET_LAPIC. I.e. no remotely sane setup can actually work with a modified x2APIC ID. Making the x2APIC ID fully readonly fixes a WARN in KVM's optimized map calculation, which expects the LDR to align with the x2APIC ID. WARNING: CPU: 2 PID: 958 at arch/x86/kvm/lapic.c:331 kvm_recalculate_apic_map+0x609/0xa00 [kvm] CPU: 2 PID: 958 Comm: recalc_apic_map Not tainted 6.4.0-rc3-vanilla+ #35 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.2-1-1 04/01/2014 RIP: 0010:kvm_recalculate_apic_map+0x609/0xa00 [kvm] Call Trace: <TASK> kvm_apic_set_state+0x1cf/0x5b0 [kvm] kvm_arch_vcpu_ioctl+0x1806/0x2100 [kvm] kvm_vcpu_ioctl+0x663/0x8a0 [kvm] __x64_sys_ioctl+0xb8/0xf0 do_syscall_64+0x56/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fade8b9dd6f Unfortunately, the WARN can still trigger for other CPUs than the current one by racing against KVM_SET_LAPIC, so remove it completely. Reported-by: Michal Luczaj <mhal@rbox.co> Closes: https://lore.kernel.org/all/814baa0c-1eaa-4503-129f-059917365e80@rbox.co Reported-by: Haoyu Wu <haoyuwu254@gmail.com> Closes: https://lore.kernel.org/all/20240126161633.62529-1-haoyuwu254@gmail.com Reported-by: syzbot+545f1326f405db4e1c3e@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000c2a6b9061cbca3c3@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Message-ID: <20240802202941.344889-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: James Houghton <jthoughton@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17tty: xilinx_uartps: split sysrq handlingSean Anderson
commit b06f388994500297bb91be60ffaf6825ecfd2afe upstream. lockdep detects the following circular locking dependency: CPU 0 CPU 1 ========================== ============================ cdns_uart_isr() printk() uart_port_lock(port) console_lock() cdns_uart_console_write() if (!port->sysrq) uart_port_lock(port) uart_handle_break() port->sysrq = ... uart_handle_sysrq_char() printk() console_lock() The fixed commit attempts to avoid this situation by only taking the port lock in cdns_uart_console_write if port->sysrq unset. However, if (as shown above) cdns_uart_console_write runs before port->sysrq is set, then it will try to take the port lock anyway. This may result in a deadlock. Fix this by splitting sysrq handling into two parts. We use the prepare helper under the port lock and defer handling until we release the lock. Fixes: 74ea66d4ca06 ("tty: xuartps: Improve sysrq handling") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Cc: stable@vger.kernel.org # c980248179d: serial: xilinx_uartps: Use port lock wrappers Acked-by: John Ogness <john.ogness@linutronix.de> Link: https://lore.kernel.org/r/20250110213822.2107462-1-sean.anderson@linux.dev Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17x86/mm/ident_map: Use gbpages only where full GB page should be mapped.Steve Wahl
commit cc31744a294584a36bf764a0ffa3255a8e69f036 upstream. When ident_pud_init() uses only GB pages to create identity maps, large ranges of addresses not actually requested can be included in the resulting table; a 4K request will map a full GB. This can include a lot of extra address space past that requested, including areas marked reserved by the BIOS. That allows processor speculation into reserved regions, that on UV systems can cause system halts. Only use GB pages when map creation requests include the full GB page of space. Fall back to using smaller 2M pages when only portions of a GB page are included in the request. No attempt is made to coalesce mapping requests. If a request requires a map entry at the 2M (pmd) level, subsequent mapping requests within the same 1G region will also be at the pmd level, even if adjacent or overlapping such requests could have been combined to map a full GB page. Existing usage starts with larger regions and then adds smaller regions, so this should not have any great consequence. Signed-off-by: Steve Wahl <steve.wahl@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Pavin Joseph <me@pavinjoseph.com> Tested-by: Sarah Brofeldt <srhb@dbc.dk> Tested-by: Eric Hagberg <ehagberg@gmail.com> Link: https://lore.kernel.org/all/20240717213121.3064030-3-steve.wahl@hpe.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17selftests: mptcp: join: fix AF_INET6 variableMatthieu Baerts (NGI0)
The Fixes commit is a backport renaming a variable, from AF_INET6 to MPTCP_LIB_AF_INET6. The commit has been applied without conflicts, except that it missed one extra variable that was in v6.6, but not in the version linked to the Fixes commit. This variable has then been renamed too to avoid these errors: LISTENER_CREATED 10.0.2.1:10100 ./mptcp_join.sh: line 2944: [: 2: unary operator expected LISTENER_CLOSED 10.0.2.1:10100 ./mptcp_join.sh: line 2944: [: 2: unary operator expected Fixes: a17d1419126b ("selftests: mptcp: declare event macros in mptcp_lib") Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17mptcp: prevent excessive coalescing on receivePaolo Abeni
commit 56b824eb49d6258aa0bad09a406ceac3f643cdae upstream. Currently the skb size after coalescing is only limited by the skb layout (the skb must not carry frag_list). A single coalesced skb covering several MSS can potentially fill completely the receive buffer. In such a case, the snd win will zero until the receive buffer will be empty again, affecting tput badly. Fixes: 8268ed4c9d19 ("mptcp: introduce and use mptcp_try_coalesce()") Cc: stable@vger.kernel.org # please delay 2 weeks after 6.13-final release Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241230-net-mptcp-rbuf-fixes-v1-3-8608af434ceb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17mptcp: pm: only set fullmesh for subflow endpMatthieu Baerts (NGI0)
commit 1bb0d1348546ad059f55c93def34e67cb2a034a6 upstream. With the in-kernel path-manager, it is possible to change the 'fullmesh' flag. The code in mptcp_pm_nl_fullmesh() expects to change it only on 'subflow' endpoints, to recreate more or less subflows using the linked address. Unfortunately, the set_flags() hook was a bit more permissive, and allowed 'implicit' endpoints to get the 'fullmesh' flag while it is not allowed before. That's what syzbot found, triggering the following warning: WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 __mark_subflow_endp_available net/mptcp/pm_netlink.c:1496 [inline] WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_pm_nl_fullmesh net/mptcp/pm_netlink.c:1980 [inline] WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_nl_set_flags net/mptcp/pm_netlink.c:2003 [inline] WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_pm_nl_set_flags+0x974/0xdc0 net/mptcp/pm_netlink.c:2064 Modules linked in: CPU: 0 UID: 0 PID: 6499 Comm: syz.1.413 Not tainted 6.13.0-rc5-syzkaller-00172-gd1bf27c4e176 #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_netlink.c:1496 [inline] RIP: 0010:mptcp_pm_nl_fullmesh net/mptcp/pm_netlink.c:1980 [inline] RIP: 0010:mptcp_nl_set_flags net/mptcp/pm_netlink.c:2003 [inline] RIP: 0010:mptcp_pm_nl_set_flags+0x974/0xdc0 net/mptcp/pm_netlink.c:2064 Code: 01 00 00 49 89 c5 e8 fb 45 e8 f5 e9 b8 fc ff ff e8 f1 45 e8 f5 4c 89 f7 be 03 00 00 00 e8 44 1d 0b f9 eb a0 e8 dd 45 e8 f5 90 <0f> 0b 90 e9 17 ff ff ff 89 d9 80 e1 07 38 c1 0f 8c c9 fc ff ff 48 RSP: 0018:ffffc9000d307240 EFLAGS: 00010293 RAX: ffffffff8bb72e03 RBX: 0000000000000000 RCX: ffff88807da88000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000d307430 R08: ffffffff8bb72cf0 R09: 1ffff1100b842a5e R10: dffffc0000000000 R11: ffffed100b842a5f R12: ffff88801e2e5ac0 R13: ffff88805c214800 R14: ffff88805c2152e8 R15: 1ffff1100b842a5d FS: 00005555619f6500(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020002840 CR3: 00000000247e6000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0xb14/0xec0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2542 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x8e4/0xcb0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:726 ____sys_sendmsg+0x52a/0x7e0 net/socket.c:2583 ___sys_sendmsg net/socket.c:2637 [inline] __sys_sendmsg+0x269/0x350 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5fe8785d29 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff571f5558 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f5fe8975fa0 RCX: 00007f5fe8785d29 RDX: 0000000000000000 RSI: 0000000020000480 RDI: 0000000000000007 RBP: 00007f5fe8801b08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f5fe8975fa0 R14: 00007f5fe8975fa0 R15: 00000000000011f4 </TASK> Here, syzbot managed to set the 'fullmesh' flag on an 'implicit' and used -- according to 'id_avail_bitmap' -- endpoint, causing the PM to try decrement the local_addr_used counter which is only incremented for the 'subflow' endpoint. Note that 'no type' endpoints -- not 'subflow', 'signal', 'implicit' -- are fine, because their ID will not be marked as used in the 'id_avail' bitmap, and setting 'fullmesh' can help forcing the creation of subflow when receiving an ADD_ADDR. Fixes: 73c762c1f07d ("mptcp: set fullmesh flag in pm_netlink") Cc: stable@vger.kernel.org Reported-by: syzbot+cd16e79c1e45f3fe0377@syzkaller.appspotmail.com Closes: https://lore.kernel.org/6786ac51.050a0220.216c54.00a6.GAE@google.com Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/540 Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250123-net-mptcp-syzbot-issues-v1-2-af73258a726f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ Conflicts in pm_netlink.c, because the code has been moved around in commit 6a42477fe449 ("mptcp: update set_flags interfaces"), but the same fix can still be applied at the original place. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17cachefiles: Fix NULL pointer dereference in object->fileZizhi Wo
commit 31ad74b20227ce6b40910ff78b1c604e42975cf1 upstream. At present, the object->file has the NULL pointer dereference problem in ondemand-mode. The root cause is that the allocated fd and object->file lifetime are inconsistent, and the user-space invocation to anon_fd uses object->file. Following is the process that triggers the issue: [write fd] [umount] cachefiles_ondemand_fd_write_iter fscache_cookie_state_machine cachefiles_withdraw_cookie if (!file) return -ENOBUFS cachefiles_clean_up_object cachefiles_unmark_inode_in_use fput(object->file) object->file = NULL // file NULL pointer dereference! __cachefiles_write(..., file, ...) Fix this issue by add an additional reference count to the object->file before write/llseek, and decrement after it finished. Fixes: c8383054506c ("cachefiles: notify the user daemon when looking up cookie") Signed-off-by: Zizhi Wo <wozizhi@huawei.com> Link: https://lore.kernel.org/r/20241107110649.3980193-5-wozizhi@huawei.com Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Bin Lan <lanbincn@qq.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17btrfs: avoid monopolizing a core when activating a swap fileFilipe Manana
commit 2c8507c63f5498d4ee4af404a8e44ceae4345056 upstream. This commit re-attempts the backport of the change to the linux-6.6.y branch. Commit 6e1a82259307 ("btrfs: avoid monopolizing a core when activating a swap file") on this branch was reverted. During swap activation we iterate over the extents of a file and we can have many thousands of them, so we can end up in a busy loop monopolizing a core. Avoid this by doing a voluntary reschedule after processing each extent. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17Revert "btrfs: avoid monopolizing a core when activating a swap file"Koichiro Den
This reverts commit 6e1a8225930719a9f352d56320214e33e2dde0a6. The backport for linux-6.6.y, commit 6e1a82259307 ("btrfs: avoid monopolizing a core when activating a swap file"), inserted cond_resched() in the wrong location. Revert it now; a subsequent commit will re-backport the original patch. Fixes: 6e1a82259307 ("btrfs: avoid monopolizing a core when activating a swap file") # linux-6.6.y Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17ocfs2: check dir i_size in ocfs2_find_entrySu Yue
commit b0fce54b8c0d8e5f2b4c243c803c5996e73baee8 upstream. syz reports an out of bounds read: ================================================================== BUG: KASAN: slab-out-of-bounds in ocfs2_match fs/ocfs2/dir.c:334 [inline] BUG: KASAN: slab-out-of-bounds in ocfs2_search_dirblock+0x283/0x6e0 fs/ocfs2/dir.c:367 Read of size 1 at addr ffff88804d8b9982 by task syz-executor.2/14802 CPU: 0 UID: 0 PID: 14802 Comm: syz-executor.2 Not tainted 6.13.0-rc4 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Sched_ext: serialise (enabled+all), task: runnable_at=-10ms Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x229/0x350 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x164/0x530 mm/kasan/report.c:489 kasan_report+0x147/0x180 mm/kasan/report.c:602 ocfs2_match fs/ocfs2/dir.c:334 [inline] ocfs2_search_dirblock+0x283/0x6e0 fs/ocfs2/dir.c:367 ocfs2_find_entry_id fs/ocfs2/dir.c:414 [inline] ocfs2_find_entry+0x1143/0x2db0 fs/ocfs2/dir.c:1078 ocfs2_find_files_on_disk+0x18e/0x530 fs/ocfs2/dir.c:1981 ocfs2_lookup_ino_from_name+0xb6/0x110 fs/ocfs2/dir.c:2003 ocfs2_lookup+0x30a/0xd40 fs/ocfs2/namei.c:122 lookup_open fs/namei.c:3627 [inline] open_last_lookups fs/namei.c:3748 [inline] path_openat+0x145a/0x3870 fs/namei.c:3984 do_filp_open+0xe9/0x1c0 fs/namei.c:4014 do_sys_openat2+0x135/0x1d0 fs/open.c:1402 do_sys_open fs/open.c:1417 [inline] __do_sys_openat fs/open.c:1433 [inline] __se_sys_openat fs/open.c:1428 [inline] __x64_sys_openat+0x15d/0x1c0 fs/open.c:1428 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf6/0x210 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f01076903ad Code: c3 e8 a7 2b 00 00 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f01084acfc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 00007f01077cbf80 RCX: 00007f01076903ad RDX: 0000000000105042 RSI: 0000000020000080 RDI: ffffffffffffff9c RBP: 00007f01077cbf80 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000001ff R11: 0000000000000246 R12: 0000000000000000 R13: 00007f01077cbf80 R14: 00007f010764fc90 R15: 00007f010848d000 </TASK> ================================================================== And a general protection fault in ocfs2_prepare_dir_for_insert: ================================================================== loop0: detected capacity change from 0 to 32768 JBD2: Ignoring recovery information on journal ocfs2: Mounting device (7,0) on (node local, slot 0) with ordered data mode. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 UID: 0 PID: 5096 Comm: syz-executor792 Not tainted 6.11.0-rc4-syzkaller-00002-gb0da640826ba #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:ocfs2_find_dir_space_id fs/ocfs2/dir.c:3406 [inline] RIP: 0010:ocfs2_prepare_dir_for_insert+0x3309/0x5c70 fs/ocfs2/dir.c:4280 Code: 00 00 e8 2a 25 13 fe e9 ba 06 00 00 e8 20 25 13 fe e9 4f 01 00 00 e8 16 25 13 fe 49 8d 7f 08 49 8d 5f 09 48 89 f8 48 c1 e8 03 <42> 0f b6 04 20 84 c0 0f 85 bd 23 00 00 48 89 d8 48 c1 e8 03 42 0f RSP: 0018:ffffc9000af9f020 EFLAGS: 00010202 RAX: 0000000000000001 RBX: 0000000000000009 RCX: ffff88801e27a440 RDX: 0000000000000000 RSI: 0000000000000400 RDI: 0000000000000008 RBP: ffffc9000af9f830 R08: ffffffff8380395b R09: ffffffff838090a7 R10: 0000000000000002 R11: ffff88801e27a440 R12: dffffc0000000000 R13: ffff88803c660878 R14: f700000000000088 R15: 0000000000000000 FS: 000055555a677380(0000) GS:ffff888020800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000560bce569178 CR3: 000000001de5a000 CR4: 0000000000350ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ocfs2_mknod+0xcaf/0x2b40 fs/ocfs2/namei.c:292 vfs_mknod+0x36d/0x3b0 fs/namei.c:4088 do_mknodat+0x3ec/0x5b0 __do_sys_mknodat fs/namei.c:4166 [inline] __se_sys_mknodat fs/namei.c:4163 [inline] __x64_sys_mknodat+0xa7/0xc0 fs/namei.c:4163 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f2dafda3a99 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe336a6658 EFLAGS: 00000246 ORIG_RAX: 0000000000000103 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f2dafda3a99 RDX: 00000000000021c0 RSI: 0000000020000040 RDI: 00000000ffffff9c RBP: 00007f2dafe1b5f0 R08: 0000000000004480 R09: 000055555a6784c0 R10: 0000000000000103 R11: 0000000000000246 R12: 00007ffe336a6680 R13: 00007ffe336a68a8 R14: 431bde82d7b634db R15: 00007f2dafdec03b </TASK> ================================================================== The two reports are all caused invalid negative i_size of dir inode. For ocfs2, dir_inode can't be negative or zero. Here add a check in which is called by ocfs2_check_dir_for_entry(). It fixes the second report as ocfs2_check_dir_for_entry() must be called before ocfs2_prepare_dir_for_insert(). Also set a up limit for dir with OCFS2_INLINE_DATA_FL. The i_size can't be great than blocksize. Link: https://lkml.kernel.org/r/20250106140640.92260-1-glass.su@suse.com Reported-by: Jiacheng Xu <stitch@zju.edu.cn> Link: https://lore.kernel.org/ocfs2-devel/17a04f01.1ae74.19436d003fc.Coremail.stitch@zju.edu.cn/T/#u Reported-by: syzbot+5a64828fcc4c2ad9b04f@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/0000000000005894f3062018caf1@google.com/T/ Signed-off-by: Su Yue <glass.su@suse.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17net/ncsi: use dev_set_mac_address() for Get MC MAC Address handlingPaul Fertser
commit 05d91cdb1f9108426b14975ef4eeddf15875ca05 upstream. Copy of the rationale from 790071347a0a1a89e618eedcd51c687ea783aeb3: Change ndo_set_mac_address to dev_set_mac_address because dev_set_mac_address provides a way to notify network layer about MAC change. In other case, services may not aware about MAC change and keep using old one which set from network adapter driver. As example, DHCP client from systemd do not update MAC address without notification from net subsystem which leads to the problem with acquiring the right address from DHCP server. Since dev_set_mac_address requires RTNL lock the operation can not be performed directly in the response handler, see 9e2bbab94b88295dcc57c7580393c9ee08d7314d. The way of selecting the first suitable MAC address from the list is changed, instead of having the driver check it this patch just assumes any valid MAC should be good. Fixes: b8291cf3d118 ("net/ncsi: Add NC-SI 1.2 Get MC MAC Address command") Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17spi: atmel-qspi: Memory barriers after memory-mapped I/OBence Csókás
commit be92ab2de0ee1a13291c3b47b2d7eb24d80c0a2c upstream. The QSPI peripheral control and status registers are accessible via the SoC's APB bus, whereas MMIO transactions' data travels on the AHB bus. Microchip documentation and even sample code from Atmel emphasises the need for a memory barrier before the first MMIO transaction to the AHB-connected QSPI, and before the last write to its registers via APB. This is achieved by the following lines in `atmel_qspi_transfer()`: /* Dummy read of QSPI_IFR to synchronize APB and AHB accesses */ (void)atmel_qspi_read(aq, QSPI_IFR); However, the current documentation makes no mention to synchronization requirements in the other direction, i.e. after the last data written via AHB, and before the first register access on APB. In our case, we were facing an issue where the QSPI peripheral would cease to send any new CSR (nCS Rise) interrupts, leading to a timeout in `atmel_qspi_wait_for_completion()` and ultimately this panic in higher levels: ubi0 error: ubi_io_write: error -110 while writing 63108 bytes to PEB 491:128, written 63104 bytes After months of extensive research of the codebase, fiddling around the debugger with kgdb, and back-and-forth with Microchip, we came to the conclusion that the issue is probably that the peripheral is still busy receiving on AHB when the LASTXFER bit is written to its Control Register on APB, therefore this write gets lost, and the peripheral still thinks there is more data to come in the MMIO transfer. This was first formulated when we noticed that doubling the write() of QSPI_CR_LASTXFER seemed to solve the problem. Ultimately, the solution is to introduce memory barriers after the AHB-mapped MMIO transfers, to ensure ordering. Fixes: d5433def3153 ("mtd: spi-nor: atmel-quadspi: Add spi-mem support to atmel-quadspi") Cc: Hari.PrasathGE@microchip.com Cc: Mahesh.Abotula@microchip.com Cc: Marco.Cardellini@microchip.com Cc: stable@vger.kernel.org # c0a0203cf579: ("spi: atmel-quadspi: Create `atmel_qspi_ops`"...) Cc: stable@vger.kernel.org # 6.x.y Signed-off-by: Bence Csókás <csokas.bence@prolan.hu> Link: https://patch.msgid.link/20241219091258.395187-1-csokas.bence@prolan.hu Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17spi: atmel-quadspi: Create `atmel_qspi_ops` to support newer SoC familiesCsókás, Bence
commit c0a0203cf57963792d59b3e4317a1d07b73df42a upstream. Refactor the code to introduce an ops struct, to prepare for merging support for later SoCs, such as SAMA7G5. This code was based on the vendor's kernel (linux4microchip). Cc'ing original contributors. Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu> Link: https://patch.msgid.link/20241128174316.3209354-2-csokas.bence@prolan.hu Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17MIPS: ftrace: Declare ftrace_get_parent_ra_addr() as staticWangYuli
commit ddd068d81445b17ac0bed084dfeb9e58b4df3ddd upstream. Declare ftrace_get_parent_ra_addr() as static to suppress clang compiler warning that 'no previous prototype'. This function is not intended to be called from other parts. Fix follow error with clang-19: arch/mips/kernel/ftrace.c:251:15: error: no previous prototype for function 'ftrace_get_parent_ra_addr' [-Werror,-Wmissing-prototypes] 251 | unsigned long ftrace_get_parent_ra_addr(unsigned long self_ra, unsigned long | ^ arch/mips/kernel/ftrace.c:251:1: note: declare 'static' if the function is not intended to be used outside of this translation unit 251 | unsigned long ftrace_get_parent_ra_addr(unsigned long self_ra, unsigned long | ^ | static 1 error generated. Signed-off-by: WangYuli <wangyuli@uniontech.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17rtc: zynqmp: Fix optional clock name propertyMichal Simek
commit 2a388ff22d2cbfc5cbd628ef085bdcd3b7dc64f5 upstream. Clock description in DT binding introduced by commit f69060c14431 ("dt-bindings: rtc: zynqmp: Add clock information") is talking about "rtc" clock name but driver is checking "rtc_clk" name instead. Because clock is optional property likely in was never handled properly by the driver. Fixes: 07dcc6f9c762 ("rtc: zynqmp: Add calibration set and get support") Signed-off-by: Michal Simek <michal.simek@amd.com> Cc: stable@kernel.org Reviewed-by: Peter Korsgaard <peter@korsgaard.com> Link: https://lore.kernel.org/r/cd5f0c9d01ec1f5a240e37a7e0d85b8dacb3a869.1732723280.git.michal.simek@amd.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17ptp: Ensure info->enable callback is always setThomas Weißschuh
commit fd53aa40e65f518453115b6f56183b0c201db26b upstream. The ioctl and sysfs handlers unconditionally call the ->enable callback. Not all drivers implement that callback, leading to NULL dereferences. Example of affected drivers: ptp_s390.c, ptp_vclock.c and ptp_mock.c. Instead use a dummy callback if no better was specified by the driver. Fixes: d94ba80ebbea ("ptp: Added a brand new class driver for ptp clocks.") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250123-ptp-enable-v1-1-b015834d3a47@weissschuh.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17pinctrl: samsung: fix fwnode refcount cleanup if platform_get_irq_optional() ↵Javier Carrasco
fails commit 459915f55509f4bfd6076daa1428e28490ddee3b upstream. Commit 50ebd19e3585 ("pinctrl: samsung: drop pin banks references on error paths") fixed the pin bank references on the error paths of the probe function, but there is still an error path where this is not done. If samsung_pinctrl_get_soc_data() does not fail, the child references will have acquired, and they will need to be released in the error path of platform_get_irq_optional(), as it is done in the following error paths within the probe function. Replace the direct return in the error path with a goto instruction to the cleanup function. Cc: stable@vger.kernel.org Fixes: a382d568f144 ("pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20241106-samsung-pinctrl-put-v1-1-de854e26dd03@gmail.com [krzysztof: change Fixes SHA to point to commit introducing the return leading to OF node leak] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17rtla/timerlat_top: Stop timerlat tracer on signalTomas Glozar
commit a4dfce7559d75430c464294ddee554be2a413c4a upstream. Currently, when either SIGINT from the user or SIGALRM from the duration timer is caught by rtla-timerlat, stop_tracing is set to break out of the main loop. This is not sufficient for cases where the timerlat tracer is producing more data than rtla can consume, since in that case, rtla is looping indefinitely inside tracefs_iterate_raw_events, never reaches the check of stop_tracing and hangs. In addition to setting stop_tracing, also stop the timerlat tracer on received signal (SIGINT or SIGALRM). This will stop new samples so that the existing samples may be processed and tracefs_iterate_raw_events eventually exits. Cc: stable@vger.kernel.org Cc: John Kacur <jkacur@redhat.com> Cc: Luis Goncalves <lgoncalv@redhat.com> Cc: Gabriele Monaco <gmonaco@redhat.com> Link: https://lore.kernel.org/20250116144931.649593-4-tglozar@redhat.com Fixes: a828cd18bc4a ("rtla: Add timerlat tool and timelart top mode") Signed-off-by: Tomas Glozar <tglozar@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17rtla/timerlat_hist: Stop timerlat tracer on signalTomas Glozar
commit c73cab9dbed04d8f65ca69177b4b21ed3e09dfa7 upstream. Currently, when either SIGINT from the user or SIGALRM from the duration timer is caught by rtla-timerlat, stop_tracing is set to break out of the main loop. This is not sufficient for cases where the timerlat tracer is producing more data than rtla can consume, since in that case, rtla is looping indefinitely inside tracefs_iterate_raw_events, never reaches the check of stop_tracing and hangs. In addition to setting stop_tracing, also stop the timerlat tracer on received signal (SIGINT or SIGALRM). This will stop new samples so that the existing samples may be processed and tracefs_iterate_raw_events eventually exits. Cc: stable@vger.kernel.org Cc: John Kacur <jkacur@redhat.com> Cc: Luis Goncalves <lgoncalv@redhat.com> Cc: Gabriele Monaco <gmonaco@redhat.com> Link: https://lore.kernel.org/20250116144931.649593-3-tglozar@redhat.com Fixes: 1eeb6328e8b3 ("rtla/timerlat: Add timerlat hist mode") Signed-off-by: Tomas Glozar <tglozar@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17rtla: Add trace_instance_stopTomas Glozar
commit e879b5dcf8d044f3865a32d95cc5b213f314c54f upstream. Support not only turning trace on for the timerlat tracer, but also turning it off. This will be used in subsequent patches to stop the timerlat tracer without also wiping the trace buffer. Cc: stable@vger.kernel.org Cc: John Kacur <jkacur@redhat.com> Cc: Luis Goncalves <lgoncalv@redhat.com> Cc: Gabriele Monaco <gmonaco@redhat.com> Link: https://lore.kernel.org/20250116144931.649593-2-tglozar@redhat.com Signed-off-by: Tomas Glozar <tglozar@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17rtla/timerlat_top: Set OSNOISE_WORKLOAD for kernel threadsTomas Glozar
commit 217f0b1e990e30a1f06f6d531fdb4530f4788d48 upstream. When using rtla timerlat with userspace threads (-u or -U), rtla disables the OSNOISE_WORKLOAD option in /sys/kernel/tracing/osnoise/options. This option is not re-enabled in a subsequent run with kernel-space threads, leading to rtla collecting no results if the previous run exited abnormally: $ rtla timerlat top -u ^\Quit (core dumped) $ rtla timerlat top -k -d 1s Timer Latency 0 00:00:01 | IRQ Timer Latency (us) | Thread Timer Latency (us) CPU COUNT | cur min avg max | cur min avg max The issue persists until OSNOISE_WORKLOAD is set manually by running: $ echo OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options Set OSNOISE_WORKLOAD when running rtla with kernel-space threads if available to fix the issue. Cc: stable@vger.kernel.org Cc: John Kacur <jkacur@redhat.com> Cc: Luis Goncalves <lgoncalv@redhat.com> Link: https://lore.kernel.org/20250107144823.239782-4-tglozar@redhat.com Fixes: cdca4f4e5e8e ("rtla/timerlat_top: Add timerlat user-space support") Signed-off-by: Tomas Glozar <tglozar@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17rtla/timerlat_hist: Set OSNOISE_WORKLOAD for kernel threadsTomas Glozar
commit d8d866171a414ed88bd0d720864095fd75461134 upstream. When using rtla timerlat with userspace threads (-u or -U), rtla disables the OSNOISE_WORKLOAD option in /sys/kernel/tracing/osnoise/options. This option is not re-enabled in a subsequent run with kernel-space threads, leading to rtla collecting no results if the previous run exited abnormally: $ rtla timerlat hist -u ^\Quit (core dumped) $ rtla timerlat hist -k -d 1s Index over: count: min: avg: max: ALL: IRQ Thr Usr count: 0 0 0 min: - - - avg: - - - max: - - - The issue persists until OSNOISE_WORKLOAD is set manually by running: $ echo OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options Set OSNOISE_WORKLOAD when running rtla with kernel-space threads if available to fix the issue. Cc: stable@vger.kernel.org Cc: John Kacur <jkacur@redhat.com> Cc: Luis Goncalves <lgoncalv@redhat.com> Link: https://lore.kernel.org/20250107144823.239782-3-tglozar@redhat.com Fixes: ed774f7481fa ("rtla/timerlat_hist: Add timerlat user-space support") Signed-off-by: Tomas Glozar <tglozar@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17rtla/osnoise: Distinguish missing workload optionTomas Glozar
commit 80d3ba1cf51bfbbb3b098434f2b2c95cd7c0ae5c upstream. osnoise_set_workload returns -1 for both missing OSNOISE_WORKLOAD option and failure in setting the option. Return -1 for missing and -2 for failure to distinguish them. Cc: stable@vger.kernel.org Cc: John Kacur <jkacur@redhat.com> Cc: Luis Goncalves <lgoncalv@redhat.com> Link: https://lore.kernel.org/20250107144823.239782-2-tglozar@redhat.com Signed-off-by: Tomas Glozar <tglozar@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17tracing/osnoise: Fix resetting of tracepointsSteven Rostedt
commit e3ff4245928f948f3eb2e852aa350b870421c358 upstream. If a timerlat tracer is started with the osnoise option OSNOISE_WORKLOAD disabled, but then that option is enabled and timerlat is removed, the tracepoints that were enabled on timerlat registration do not get disabled. If the option is disabled again and timelat is started, then it triggers a warning in the tracepoint code due to registering the tracepoint again without ever disabling it. Do not use the same user space defined options to know to disable the tracepoints when timerlat is removed. Instead, set a global flag when it is enabled and use that flag to know to disable the events. ~# echo NO_OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options ~# echo timerlat > /sys/kernel/tracing/current_tracer ~# echo OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options ~# echo nop > /sys/kernel/tracing/current_tracer ~# echo NO_OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options ~# echo timerlat > /sys/kernel/tracing/current_tracer Triggers: ------------[ cut here ]------------ WARNING: CPU: 6 PID: 1337 at kernel/tracepoint.c:294 tracepoint_add_func+0x3b6/0x3f0 Modules linked in: CPU: 6 UID: 0 PID: 1337 Comm: rtla Not tainted 6.13.0-rc4-test-00018-ga867c441128e-dirty #73 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:tracepoint_add_func+0x3b6/0x3f0 Code: 48 8b 53 28 48 8b 73 20 4c 89 04 24 e8 23 59 11 00 4c 8b 04 24 e9 36 fe ff ff 0f 0b b8 ea ff ff ff 45 84 e4 0f 84 68 fe ff ff <0f> 0b e9 61 fe ff ff 48 8b 7b 18 48 85 ff 0f 84 4f ff ff ff 49 8b RSP: 0018:ffffb9b003a87ca0 EFLAGS: 00010202 RAX: 00000000ffffffef RBX: ffffffff92f30860 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9bf59e91ccd0 RDI: ffffffff913b6410 RBP: 000000000000000a R08: 00000000000005c7 R09: 0000000000000002 R10: ffffb9b003a87ce0 R11: 0000000000000002 R12: 0000000000000001 R13: ffffb9b003a87ce0 R14: ffffffffffffffef R15: 0000000000000008 FS: 00007fce81209240(0000) GS:ffff9bf6fdd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055e99b728000 CR3: 00000001277c0002 CR4: 0000000000172ef0 Call Trace: <TASK> ? __warn.cold+0xb7/0x14d ? tracepoint_add_func+0x3b6/0x3f0 ? report_bug+0xea/0x170 ? handle_bug+0x58/0x90 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? __pfx_trace_sched_migrate_callback+0x10/0x10 ? tracepoint_add_func+0x3b6/0x3f0 ? __pfx_trace_sched_migrate_callback+0x10/0x10 ? __pfx_trace_sched_migrate_callback+0x10/0x10 tracepoint_probe_register+0x78/0xb0 ? __pfx_trace_sched_migrate_callback+0x10/0x10 osnoise_workload_start+0x2b5/0x370 timerlat_tracer_init+0x76/0x1b0 tracing_set_tracer+0x244/0x400 tracing_set_trace_write+0xa0/0xe0 vfs_write+0xfc/0x570 ? do_sys_openat2+0x9c/0xe0 ksys_write+0x72/0xf0 do_syscall_64+0x79/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Tomas Glozar <tglozar@redhat.com> Cc: Gabriele Monaco <gmonaco@redhat.com> Cc: Luis Goncalves <lgoncalv@redhat.com> Cc: John Kacur <jkacur@redhat.com> Link: https://lore.kernel.org/20250123204159.4450c88e@gandalf.local.home Fixes: e88ed227f639e ("tracing/timerlat: Add user-space interface") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17scripts/gdb: fix aarch64 userspace detection in get_current_taskJan Kiszka
commit 4ebc417ef9cb34010a71270421fe320ec5d88aa2 upstream. At least recent gdb releases (seen with 14.2) return SP_EL0 as signed long which lets the right-shift always return 0. Link: https://lkml.kernel.org/r/dcd2fabc-9131-4b48-8419-6444e2d67454@siemens.com Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Barry Song <baohua@kernel.org> Cc: Kieran Bingham <kbingham@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17maple_tree: simplify split calculationWei Yang
commit 4f6a6bed0bfef4b966f076f33eb4f5547226056a upstream. Patch series "simplify split calculation", v3. This patch (of 3): The current calculation for splitting nodes tries to enforce a minimum span on the leaf nodes. This code is complex and never worked correctly to begin with, due to the min value being passed as 0 for all leaves. The calculation should just split the data as equally as possible between the new nodes. Note that b_end will be one more than the data, so the left side is still favoured in the calculation. The current code may also lead to a deficient node by not leaving enough data for the right side of the split. This issue is also addressed with the split calculation change. [Liam.Howlett@Oracle.com: rephrase the change log] Link: https://lkml.kernel.org/r/20241113031616.10530-1-richard.weiyang@gmail.com Link: https://lkml.kernel.org/r/20241113031616.10530-2-richard.weiyang@gmail.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17net: phy: c45-tjaxx: add delay between MDIO write and read in soft_resetMilos Reljin
commit bd1bbab717608757cccbbe08b0d46e6c3ed0ced5 upstream. In application note (AN13663) for TJA1120, on page 30, there's a figure with average PHY startup timing values following software reset. The time it takes for SMI to become operational after software reset ranges roughly from 500 us to 1500 us. This commit adds 2000 us delay after MDIO write which triggers software reset. Without this delay, soft_reset function returns an error and prevents successful PHY init. Cc: stable@vger.kernel.org Fixes: b050f2f15e04 ("phy: nxp-c45: add driver for tja1103") Signed-off-by: Milos Reljin <milos_reljin@outlook.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/AM8P250MB0124D258E5A71041AF2CC322E1E32@AM8P250MB0124.EURP250.PROD.OUTLOOK.COM Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17net/ncsi: wait for the last response to Deselect Package before configuring ↵Paul Fertser
channel commit 6bb194d036c6e1b329dcdff459338cdd9a54802a upstream. The NCSI state machine as it's currently implemented assumes that transition to the next logical state is performed either explicitly by calling `schedule_work(&ndp->work)` to re-queue itself or implicitly after processing the predefined (ndp->pending_req_num) number of replies. Thus to avoid the configuration FSM from advancing prematurely and getting out of sync with the process it's essential to not skip waiting for a reply. This patch makes the code wait for reception of the Deselect Package response for the last package probed before proceeding to channel configuration. Thanks go to Potin Lai and Cosmo Chou for the initial investigation and testing. Fixes: 8e13f70be05e ("net/ncsi: Probe single packages to avoid conflict") Cc: stable@vger.kernel.org Signed-off-by: Paul Fertser <fercerpav@gmail.com> Link: https://patch.msgid.link/20250116152900.8656-1-fercerpav@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17misc: fastrpc: Fix copy buffer page sizeEkansh Gupta
commit e966eae72762ecfdbdb82627e2cda48845b9dd66 upstream. For non-registered buffer, fastrpc driver copies the buffer and pass it to the remote subsystem. There is a problem with current implementation of page size calculation which is not considering the offset in the calculation. This might lead to passing of improper and out-of-bounds page size which could result in memory issue. Calculate page start and page end using the offset adjusted address instead of absolute address. Fixes: 02b45b47fbe8 ("misc: fastrpc: fix remote page size calculation") Cc: stable@kernel.org Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20250110134239.123603-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17misc: fastrpc: Fix registered buffer page addressEkansh Gupta
commit 6ca4ea1f88a06a04ed7b2c9c6bf9f00833b68214 upstream. For registered buffers, fastrpc driver sends the buffer information to remote subsystem. There is a problem with current implementation where the page address is being sent with an offset leading to improper buffer address on DSP. This is leads to functional failures as DSP expects base address in page information and extracts offset information from remote arguments. Mask the offset and pass the base page address to DSP. This issue is observed is a corner case when some buffer which is registered with fastrpc framework is passed with some offset by user and then the DSP implementation tried to read the data. As DSP expects base address and takes care of offsetting with remote arguments, passing an offsetted address will result in some unexpected data read in DSP. All generic usecases usually pass the buffer as it is hence is problem is not usually observed. If someone tries to pass offsetted buffer and then tries to compare data at HLOS and DSP end, then the ambiguity will be observed. Fixes: 80f3afd72bd4 ("misc: fastrpc: consider address offset before sending to DSP") Cc: stable@kernel.org Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20250110134239.123603-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17misc: fastrpc: Deregister device nodes properly in error scenariosAnandu Krishnan E
commit 637c20002dc8c347001292664055bfbf56544ec6 upstream. During fastrpc_rpmsg_probe, if secure device node registration succeeds but non-secure device node registration fails, the secure device node deregister is not called during error cleanup. Add proper exit paths to ensure proper cleanup in case of error. Fixes: 3abe3ab3cdab ("misc: fastrpc: add secure domain support") Cc: stable@kernel.org Signed-off-by: Anandu Krishnan E <quic_anane@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20250110134239.123603-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17misc: misc_minor_alloc to use ida for all dynamic/misc dynamic minorsVimal Agrawal
commit 6d04d2b554b14ae6c428a9c60b6c85f1e5c89f68 upstream. misc_minor_alloc was allocating id using ida for minor only in case of MISC_DYNAMIC_MINOR but misc_minor_free was always freeing ids using ida_free causing a mismatch and following warn: > > WARNING: CPU: 0 PID: 159 at lib/idr.c:525 ida_free+0x3e0/0x41f > > ida_free called for id=127 which is not allocated. > > <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< ... > > [<60941eb4>] ida_free+0x3e0/0x41f > > [<605ac993>] misc_minor_free+0x3e/0xbc > > [<605acb82>] misc_deregister+0x171/0x1b3 misc_minor_alloc is changed to allocate id from ida for all minors falling in the range of dynamic/ misc dynamic minors Fixes: ab760791c0cf ("char: misc: Increase the maximum number of dynamic misc devices to 1048448") Signed-off-by: Vimal Agrawal <vimal.agrawal@sophos.com> Reviewed-by: Dirk VanDerMerwe <dirk.vandermerwe@sophos.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20241021133812.23703-1-vimal.agrawal@sophos.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17mtd: onenand: Fix uninitialized retlen in do_otp_read()Ivan Stepchenko
commit 70a71f8151b9879b0950668ce3ad76263261fee0 upstream. The function do_otp_read() does not set the output parameter *retlen, which is expected to contain the number of bytes actually read. As a result, in onenand_otp_walk(), the tmp_retlen variable remains uninitialized after calling do_otp_walk() and used to change the values of the buf, len and retlen variables. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 49dc08eeda70 ("[MTD] [OneNAND] fix numerous races") Cc: stable@vger.kernel.org Signed-off-by: Ivan Stepchenko <sid@itb.spb.ru> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17irqchip/apple-aic: Only handle PMC interrupt as FIQ when configured soNick Chan
commit 698244bbb3bfd32ddf9a0b70a12b1c7d69056497 upstream. The CPU PMU in Apple SoCs can be configured to fire its interrupt in one of several ways, and since Apple A11 one of the methods is FIQ, but the check of the configuration register fails to test explicitely for FIQ mode. It tests whether the IMODE bitfield is zero or not and the PMCRO_IACT bit is set. That results in false positives when the IMODE bitfield is not zero, but does not have the mode PMCR0_IMODE_FIQ. Only handle the PMC interrupt as a FIQ when the CPU PMU has been configured to fire FIQs, i.e. the IMODE bitfield value is PMCR0_IMODE_FIQ and PMCR0_IACT is set. Fixes: c7708816c944 ("irqchip/apple-aic: Wire PMU interrupts") Signed-off-by: Nick Chan <towinchenmi@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20250118163554.16733-1-towinchenmi@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17i3c: master: Fix missing 'ret' assignment in set_speed()Frank Li
commit b266e0d4dac00eecdfaf50ec3f708fd0c3b39637 upstream. Fix a probe failure in the i3c master driver that occurs when no i3c devices are connected to the bus. The issue arises in `i3c_master_bus_init()` where the `ret` value is not updated after calling `master->ops->set_speed()`. If no devices are present, `ret` remains set to `I3C_ERROR_M2`, causing the code to incorrectly proceed to `err_bus_cleanup`. Cc: stable@vger.kernel.org Fixes: aef79e189ba2 ("i3c: master: support to adjust first broadcast address speed") Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20250108225533.915334-1-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17NFC: nci: Add bounds checking in nci_hci_create_pipe()Dan Carpenter
commit 110b43ef05342d5a11284cc8b21582b698b4ef1c upstream. The "pipe" variable is a u8 which comes from the network. If it's more than 127, then it results in memory corruption in the caller, nci_hci_connect_gate(). Cc: stable@vger.kernel.org Fixes: a1b0b9415817 ("NFC: nci: Create pipe on specific gate in nci_hci_connect_gate") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/bcf5453b-7204-4297-9c20-4d8c7dacf586@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17mailbox: tegra-hsp: Clear mailbox before using messagePekka Pessi
commit 0b7f8328f988178b55ee11d772a6e1238c04d29d upstream. The Tegra RCE (Camera) driver expects the mailbox to be empty before processing the IVC messages. On RT kernel, the threads processing the IVC messages (which are invoked after `mbox_chan_received_data()` is called) may be on a different CPU or running with a higher priority than the HSP interrupt handler thread. This can cause it to act on the message before the mailbox gets cleared in the HSP interrupt handler resulting in a loss of IVC notification. Fix this by clearing the mailbox data register before calling `mbox_chan_received_data()`. Fixes: 8f585d14030d ("mailbox: tegra-hsp: Add tegra_hsp_sm_ops") Fixes: 74c20dd0f892 ("mailbox: tegra-hsp: Add 128-bit shared mailbox support") Cc: stable@vger.kernel.org Signed-off-by: Pekka Pessi <ppessi@nvidia.com> Signed-off-by: Kartik Rajput <kkartik@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17nilfs2: fix possible int overflows in nilfs_fiemap()Nikita Zhandarovich
commit 6438ef381c183444f7f9d1de18f22661cba1e946 upstream. Since nilfs_bmap_lookup_contig() in nilfs_fiemap() calculates its result by being prepared to go through potentially maxblocks == INT_MAX blocks, the value in n may experience an overflow caused by left shift of blkbits. While it is extremely unlikely to occur, play it safe and cast right hand expression to wider type to mitigate the issue. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Link: https://lkml.kernel.org/r/20250124222133.5323-1-konishi.ryusuke@gmail.com Fixes: 622daaff0a89 ("nilfs2: fiemap support") Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17ocfs2: handle a symlink read error correctlyMatthew Wilcox (Oracle)
commit 2b4c2094da6d84e69b843dd3317902e977bf64bd upstream. Patch series "Convert ocfs2 to use folios". Mark did a conversion of ocfs2 to use folios and sent it to me as a giant patch for review ;-) So I've redone it as individual patches, and credited Mark for the patches where his code is substantially the same. It's not a bad way to do it; his patch had some bugs and my patches had some bugs. Hopefully all our bugs were different from each other. And hopefully Mark likes all the changes I made to his code! This patch (of 23): If we can't read the buffer, be sure to unlock the page before returning. Link: https://lkml.kernel.org/r/20241205171653.3179945-1-willy@infradead.org Link: https://lkml.kernel.org/r/20241205171653.3179945-2-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: Mark Tinguely <mark.tinguely@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17ocfs2: fix incorrect CPU endianness conversion causing mount failureHeming Zhao
commit f921da2c34692dfec5f72b5ae347b1bea22bb369 upstream. Commit 23aab037106d ("ocfs2: fix UBSAN warning in ocfs2_verify_volume()") introduced a regression bug. The blksz_bits value is already converted to CPU endian in the previous code; therefore, the code shouldn't use le32_to_cpu() anymore. Link: https://lkml.kernel.org/r/20250121112204.12834-1-heming.zhao@suse.com Fixes: 23aab037106d ("ocfs2: fix UBSAN warning in ocfs2_verify_volume()") Signed-off-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17pnfs/flexfiles: retry getting layout segment for readsMike Snitzer
commit eb3fabde15bccdf34f1c9b35a83aa4c0dacbb4ca upstream. If ff_layout_pg_get_read()'s attempt to get a layout segment results in -EAGAIN have ff_layout_pg_init_read() retry it after sleeping. If "softerr" mount is used, use 'io_maxretrans' to limit the number of attempts to get a layout segment. This fixes a long-standing issue of O_DIRECT reads failing with -EAGAIN (11) when using flexfiles Client Side Mirroring (CSM). Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17selftests: mptcp: connect: -f: no reconnectMatthieu Baerts (NGI0)
commit 5368a67307b3b2c347dc8965ac55b888be665934 upstream. The '-f' parameter is there to force the kernel to emit MPTCP FASTCLOSE by closing the connection with unread bytes in the receive queue. The xdisconnect() helper was used to stop the connection, but it does more than that: it will shut it down, then wait before reconnecting to the same address. This causes the mptcp_join's "fastclose test" to fail all the time. This failure is due to a recent change, with commit 218cc166321f ("selftests: mptcp: avoid spurious errors on disconnect"), but that went unnoticed because the test is currently ignored. The recent modification only shown an existing issue: xdisconnect() doesn't need to be used here, only the shutdown() part is needed. Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250204-net-mptcp-sft-conn-f-v1-1-6b470c72fffa@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17vfio/platform: check the bounds of read/write syscallsAlex Williamson
commit ce9ff21ea89d191e477a02ad7eabf4f996b80a69 upstream. count and offset are passed from user space and not checked, only offset is capped to 40 bits, which can be used to read/write out of bounds of the device. Fixes: 6e3f26456009 (“vfio/platform: read and write support for the device fd”) Cc: stable@vger.kernel.org Reported-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Mostafa Saleh <smostafa@google.com> Tested-by: Mostafa Saleh <smostafa@google.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17io_uring/rw: commit provided buffer state on asyncPavel Begunkov
When we get -EIOCBQUEUED, we need to ensure that the buffer is consumed from the provided buffer ring, which can be done with io_kbuf_recycle() + REQ_F_PARTIAL_IO. Reported-by: Muhammad Ramdhan <ramdhan@starlabs.sg> Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg> Reported-by: Jacob Soo <jacob.soo@starlabs.sg> Fixes: c7fb19428d67d ("io_uring: add support for ring mapped supplied buffers") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17io_uring: fix io_req_prep_async with provided buffersPavel Begunkov
io_req_prep_async() can import provided buffers, commit the ring state by giving up on that before, it'll be reimported later if needed. Reported-by: Muhammad Ramdhan <ramdhan@starlabs.sg> Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg> Reported-by: Jacob Soo <jacob.soo@starlabs.sg> Fixes: c7fb19428d67d ("io_uring: add support for ring mapped supplied buffers") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17io_uring/net: don't retry connect operation on EPOLLERRJens Axboe
commit 8c8492ca64e79c6e0f433e8c9d2bcbd039ef83d0 upstream. If a socket is shutdown before the connection completes, POLLERR is set in the poll mask. However, connect ignores this as it doesn't know, and attempts the connection again. This may lead to a bogus -ETIMEDOUT result, where it should have noticed the POLLERR and just returned -ECONNRESET instead. Have the poll logic check for whether or not POLLERR is set in the mask, and if so, mark the request as failed. Then connect can appropriately fail the request rather than retry it. Reported-by: Sergey Galas <ssgalas@cloud.ru> Cc: stable@vger.kernel.org Link: https://github.com/axboe/liburing/discussions/1335 Fixes: 3fb1bd688172 ("io_uring/net: handle -EINPROGRESS correct for IORING_OP_CONNECT") Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17io_uring: fix multishots with selected buffersPavel Begunkov
commit d63b0e8a628e62ca85a0f7915230186bb92f8bb4 upstream. We do io_kbuf_recycle() when arming a poll but every iteration of a multishot can grab more buffers, which is why we need to flush the kbuf ring state before continuing with waiting. Cc: stable@vger.kernel.org Fixes: b3fdea6ecb55c ("io_uring: multishot recv") Reported-by: Muhammad Ramdhan <ramdhan@starlabs.sg> Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg> Reported-by: Jacob Soo <jacob.soo@starlabs.sg> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/1bfc9990fe435f1fc6152ca9efeba5eb3e68339c.1738025570.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17nvmem: imx-ocotp-ele: set word length to 1Sascha Hauer
commit 1b2cb4d0b5b6a9d9fe78470704309ec75f8a1c3a upstream. The ELE hardware internally has a word length of 4. However, among other things we store MAC addresses in the ELE OCOTP. With a length of 6 bytes these are naturally unaligned to the word length. Therefore we must support unaligned reads in reg_read() and indeed it works properly when reg_read() is called via nvmem_reg_read(). Setting the word size to 4 has the only visible effect that doing unaligned reads from userspace via bin_attr_nvmem_read() do not work because they are rejected by that function. Given that we have to abstract from word accesses to byte accesses in the driver, set the word size to 1. This allows bytewise accesses from userspace to be able to test what the driver has to support anyway. Fixes: 22e9e6fcfb50 ("nvmem: imx: support i.MX93 OCOTP") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable <stable@kernel.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20241230141901.263976-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-23 14:36:46 +0000