| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.
This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.
Driver API:
- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers:
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"
* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8
- Add a for_each_compatible_node_scoped() loop and convert users in
cpufreq, dmaengine, clk, cdx, powerpc and Arm
- Simplify of/platform.c with scoped loop helpers
- Add fw_devlink tracking for "mmc-pwrseq"
- Optimize fw_devlink callback code size for pinctrl-N properties
- Replace strcmp_suffix() with strends()
DT bindings:
- Support building single binding targets
- Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst
- Add bindings for Freescale AVIC, Realtek RTD1xxx system
controllers, Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI
WT61P803 PUZZLE, Delta Electronics DPS-800-AB power supply,
Infineon IR35221 Digital Multi-phase Controller, Infineon PXE1610
Digital Dual Output 6+1 VR12.5 & VR13 CPU Controller,
socionext,uniphier-smpctrl, and xlnx,zynqmp-firmware
- Lots of trivial binding fixes to address warnings in DTS files.
These are mostly for arm64 platforms which is getting closer to be
warning free. Some public shaming has helped.
- Fix I2C bus node names in examples
- Drop obsolete brcm,vulcan-soc binding
- Drop unreferenced binding headers"
* tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (60 commits)
dt-bindings: interrupt-controller: Add compatiblie string fsl,imx(1|25|27|31|35)-avic
dt-bindings: soc: imx: add fsl,aips and fsl,emi compatible strings
dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement
dt-bindings: firmware: fsl,scu: Mark multi-channel MU layouts as deprecated
cpufreq: s5pv210: Simplify with scoped for each OF child loop
dmaengine: fsl_raid: Simplify with scoped for each OF child loop
clk: imx: imx31: Simplify with scoped for each OF child loop
clk: imx: imx27: Simplify with scoped for each OF child loop
cdx: Use mutex guard to simplify error handling
cdx: Simplify with scoped for each OF child loop
powerpc/wii: Simplify with scoped for each OF child loop
powerpc/fsp2: Simplify with scoped for each OF child loop
ARM: exynos: Simplify with scoped for each OF child loop
ARM: at91: Simplify with scoped for each OF child loop
of: Add for_each_compatible_node_scoped() helper
dt-bindings: Fix emails with spaces or missing brackets
scripts/dtc: Update to upstream version v1.7.2-62-ga26ef6400bd8
dt-bindings: crypto: inside-secure,safexcel: Mandate only ring IRQs
dt-bindings: crypto: inside-secure,safexcel: Add SoC compatibles
of: reserved_mem: Fix placement of __free() annotation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Don't try to enable Extended Tags on VFs since that bit is Reserved
and causes misleading log messages (Håkon Bugge)
- Initialize Endpoint Read Completion Boundary to match Root Port,
regardless of ACPI _HPX (Håkon Bugge)
- Apply _HPX PCIe Setting Record only to AER configuration, and only
when OS owns PCIe hotplug but not AER, to avoid clobbering Extended
Tag and Relaxed Ordering settings (Håkon Bugge)
Resource management:
- Move CardBus code to setup-cardbus.c and only build it when
CONFIG_CARDBUS is set (Ilpo Järvinen)
- Fix bridge window alignment with optional resources, where
additional alignment requirement was previously lost (Ilpo
Järvinen)
- Stop over-estimating bridge window size since they are now assigned
without any gaps between them (Ilpo Järvinen)
- Increase resource MAX_IORES_LEVEL to avoid /proc/iomem flattening
for nested bridges and endpoints (Ilpo Järvinen)
- Add pbus_mem_size_optional() to handle sizes of optional resources
(SR-IOV VF BARs, expansion ROMs, bridge windows) (Ilpo Järvinen)
- Don't claim disabled bridge windows to avoid spurious claim
failures (Ilpo Järvinen)
Driver binding:
- Fix device reference leak in pcie_port_remove_service() (Uwe
Kleine-König)
- Move pcie_port_bus_match() and pcie_port_bus_type to PCIe-specific
portdrv.c (Uwe Kleine-König)
- Convert portdrv to use pcie_port_bus_type.probe() and .remove()
callbacks so .probe() and .remove() can eventually be removed from
struct device_driver (Uwe Kleine-König)
Error handling:
- Clear stale errors on reporting agents upon probe so they don't
look like recent errors (Lukas Wunner)
- Add generic RAS tracepoint for hotplug events (Shuai Xue)
- Add RAS tracepoint for link speed changes (Shuai Xue)
Power management:
- Avoid redundant delay on transition from D3hot to D3cold if the
device was already in D3hot (Brian Norris)
- Prevent runtime suspend until devices are fully initialized to
avoid saving incompletely configured device state (Brian Norris)
Power control:
- Add power_on/off callbacks with generic signature to pwrseq,
tc9563, and slot drivers so they can be used by pwrctrl core
(Manivannan Sadhasivam)
- Add PCIe M.2 connector support to the slot pwrctrl driver
(Manivannan Sadhasivam)
- Switch to pwrctrl interfaces to create, destroy, and power on/off
devices, calling them from host controller drivers instead of the
PCI core (Manivannan Sadhasivam)
- Drop qcom .assert_perst() callbacks since this is now done by the
controller driver instead of the pwrctrl driver (Manivannan
Sadhasivam)
Virtualization:
- Remove an incorrect unlock in pci_slot_trylock() error handling
(Jinhui Guo)
- Lock the bridge device for slot reset (Keith Busch)
- Enable ACS after IOMMU configuration on OF platforms so ACS is
enabled an all devices; previously the first device enumerated
(typically a Root Port) didn't have ACS enabled (Manivannan
Sadhasivam)
- Disable ACS Source Validation for IDT 0x80b5 and 0x8090 switches to
work around hardware erratum; previously ACS SV was only
temporarily disabled, which worked for enumeration but not after
reset (Manivannan Sadhasivam)
Peer-to-peer DMA:
- Release per-CPU pgmap ref when vm_insert_page() fails to avoid hang
when removing the PCI device (Hou Tao)
- Remove incorrect p2pmem_alloc_mmap() warning about page refcount
(Hou Tao)
Endpoint framework:
- Add configfs sub-groups synchronously to avoid NULL pointer
dereference when racing with removal (Liu Song)
- Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink()
functions (Manikanta Maddireddy)
ASPEED PCIe controller driver:
- Add ASPEED Root Complex DT binding and driver (Jacky Chou)
Freescale i.MX6 PCIe controller driver:
- Add DT binding and driver support for an optional external refclock
in addition to the refclock from the internal PLL (Richard Zhu)
- Fix CLKREQ# control so host asserts it during enumeration and
Endpoints can use it afterwards to exit the L1.2 link state
(Richard Zhu)
NVIDIA Tegra PCIe controller driver:
- Export irq_domain_free_irqs() to allow PCI/MSI drivers that tear
down MSI domains to be built as modules (Aaron Kling)
- Allow pci-tegra to be built as a module (Aaron Kling)
NVIDIA Tegra194 PCIe controller driver:
- Relax Kconfig so tegra194 can be built for platforms beyond
Tegra194 (Vidya Sagar)
Qualcomm PCIe controller driver:
- Merge SC8180x DT binding into SM8150 (Krzysztof Kozlowski)
- Move SDX55, SDM845, QCS404, IPQ5018, IPQ6018, IPQ8074 Gen3,
IPQ8074, IPQ4019, IPQ9574, APQ8064, MSM8996, APQ8084 to dedicated
schema (Krzysztof Kozlowski)
- Add DT binding and driver support for SA8255p Endpoint being
configured by firmware (Mrinmay Sarkar)
- Parse PERST# from all PCIe bridge nodes for future platforms that
will have PERST# in Switch Downstream Ports as well as in Root
Ports (Manivannan Sadhasivam)
Renesas RZ/G3S PCIe controller driver:
- Use pci_generic_config_write() since the writability provided by
the custom wrapper is unnecessary (Claudiu Beznea)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2044 PCIe Root Ports (Inochi
Amaoto)
Synopsys DesignWare PCIe controller driver:
- Extend PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() to return a
pointer to the preceding Capability, to allow removal of
Capabilities that are advertised but not fully implemented (Qiang
Yu)
- Remove MSI and MSI-X Capabilities in platforms that can't support
them, so the PCI core automatically falls back to INTx (Qiang Yu)
- Add ASPM L1.1 and L1.2 Substates context to debugfs ltssm_status
for drivers that support this (Shawn Lin)
- Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if
link is not up to avoid an unnecessary timeout (Manivannan
Sadhasivam)
- Revert dw-rockchip, qcom, and DWC core changes that used link-up
IRQs to trigger enumeration instead of waiting for link to be up
because the PCI core doesn't allocate bus number space for
hierarchies that might be attached (Niklas Cassel)
- Make endpoint iATU entry for MSI permanent instead of programming
it dynamically, which is slow and racy with respect to other
concurrent traffic, e.g., eDMA (Koichiro Den)
- Use iMSI-RX MSI target address when possible to fix endpoints using
32-bit MSI (Shawn Lin)
- Allow DWC host controller driver probe to continue if device is not
found or found but inactive; only fail when there's an error with
the link (Manivannan Sadhasivam)
- For controllers like NXP i.MX6QP and i.MX7D, where LTSSM registers
are not accessible after PME_Turn_Off, simply wait 10ms instead of
polling for L2/L3 Ready (Richard Zhu)
- Use multiple iATU entries to map large bridge windows and DMA
ranges when necessary instead of failing (Samuel Holland)
- Add EPC dynamic_inbound_mapping feature bit for Endpoint
Controllers that can update BAR inbound address translation without
requiring EPF driver to clear/reset the BAR first, and advertise it
for DWC-based Endpoints (Koichiro Den)
- Add EPC subrange_mapping feature bit for Endpoint Controllers that
can map multiple independent inbound regions in a single BAR,
implement subrange mapping, advertise it for DWC-based Endpoints,
and add Endpoint selftests for it (Koichiro Den)
- Make resizable BARs work for Endpoint multi-PF configurations;
previously it only worked for PF 0 (Aksh Garg)
- Fix Endpoint non-PF 0 support for BAR configuration, ATU mappings,
and Address Match Mode (Aksh Garg)
- Set up iATU when ECAM is enabled; previously IO and MEM outbound
windows weren't programmed, and ECAM-related iATU entries weren't
restored after suspend/resume, so config accesses failed (Krishna
Chaitanya Chundru)
Miscellaneous:
- Use system_percpu_wq and WQ_PERCPU to explicitly request per-CPU
work so WQ_UNBOUND can eventually be removed (Marco Crivellari)"
* tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (176 commits)
PCI/bwctrl: Disable BW controller on Intel P45 using a quirk
PCI: Disable ACS SV for IDT 0x8090 switch
PCI: Disable ACS SV for IDT 0x80b5 switch
PCI: Cache ACS Capabilities register
PCI: Enable ACS after configuring IOMMU for OF platforms
PCI: Add ACS quirk for Pericom PI7C9X2G404 switches [12d8:b404]
PCI: Add ACS quirk for Qualcomm Hamoa & Glymur
PCI: Use device_lock_assert() to verify device lock is held
PCI: Use lockdep_assert_held(pci_bus_sem) to verify lock is held
PCI: Fix pci_slot_lock () device locking
PCI: Fix pci_slot_trylock() error handling
PCI: Mark Nvidia GB10 to avoid bus reset
PCI: Mark ASM1164 SATA controller to avoid bus reset
PCI: host-generic: Avoid reporting incorrect 'missing reg property' error
PCI/PME: Replace RMW of Root Status register with direct write
PCI/AER: Clear stale errors on reporting agents upon probe
PCI: Don't claim disabled bridge windows
PCI: rzg3s-host: Fix device node reference leak in rzg3s_pcie_host_parse_port()
PCI: dwc: Fix missing iATU setup when ECAM is enabled
PCI: dwc: Clean up iATU index usage in dw_pcie_iatu_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- dm-verity:
- various optimizations and fixes related to forward error correction
- add a .dm-verity keyring
- dm-integrity: fix bugs with growing a device in bitmap mode
- dm-mpath:
- fix leaking fake timeout requests
- fix UAF bug caused by stale rq->bio
- fix minor bugs in device creation
- dm-core:
- fix a bug related to blkg association
- avoid unnecessary blk-crypto work on invalid keys
- dm-bufio:
- dm-bufio cleanup and optimization (reducing hash table lookups)
- various other minor fixes and cleanups
* tag 'for-7.0/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (35 commits)
dm mpath: make pg_init_delay_msecs settable
Revert "dm: fix a race condition in retrieve_deps"
dm mpath: Add missing dm_put_device when failing to get scsi dh name
dm vdo encodings: clean up header and version functions
dm: use bio_clone_blkg_association
dm: fix excessive blk-crypto operations for invalid keys
dm-verity: fix section mismatch error
dm-unstripe: fix mapping bug when there are multiple targets in a table
dm-integrity: fix recalculation in bitmap mode
dm-bufio: avoid redundant buffer_tree lookups
dm-bufio: merge cache_put() into cache_put_and_wake()
selftests: add dm-verity keyring selftests
dm-verity: add dm-verity keyring
dm: clear cloned request bio pointer when last clone bio completes
dm-verity: fix up various workqueue-related comments
dm-verity: switch to bio_advance_iter_single()
dm-verity: consolidate the BH and normal work structs
dm: add WQ_PERCPU to alloc_workqueue users
dm-integrity: fix a typo in the code for write/discard race
dm: use READ_ONCE in dm_blk_report_zones
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core changes:
- Rust bindings for IO-pgtable code
- IOMMU page allocation debugging support
- Disable ATS during PCI resets
Intel VT-d changes:
- Skip dev-iotlb flush for inaccessible PCIe device
- Flush cache for PASID table before using it
- Use right invalidation method for SVA and NESTED domains
- Ensure atomicity in context and PASID entry updates
AMD-Vi changes:
- Support for nested translations
- Other minor improvements
ARM-SMMU-v2 changes:
- Configure SoC-specific prefetcher settings for Qualcomm's "MDSS"
ARM-SMMU-v3 changes:
- Improve CMDQ locking fairness for pathetically small queue sizes
- Remove tracking of the IAS as this is only relevant for AArch32 and
was causing C_BAD_STE errors
- Add device-tree support for NVIDIA's CMDQV extension
- Allow some hitless transitions for the 'MEV' and 'EATS' STE fields
- Don't disable ATS for nested S1-bypass nested domains
- Additions to the kunit selftests"
* tag 'iommu-updates-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (54 commits)
iommupt: Always add IOVA range to iotlb_gather in gather_range_pages()
iommu/amd: serialize sequence allocation under concurrent TLB invalidations
iommu/amd: Fix type of type parameter to amd_iommufd_hw_info()
iommu/arm-smmu-v3: Do not set disable_ats unless vSTE is Translate
iommu/arm-smmu-v3-test: Add nested s1bypass/s1dssbypass coverage
iommu/arm-smmu-v3: Mark EATS_TRANS safe when computing the update sequence
iommu/arm-smmu-v3: Mark STE MEV safe when computing the update sequence
iommu/arm-smmu-v3: Add update_safe bits to fix STE update sequence
iommu/arm-smmu-v3: Add device-tree support for CMDQV driver
iommu/tegra241-cmdqv: Decouple driver from ACPI
iommu/arm-smmu-qcom: Restore ACTLR settings for MDSS on sa8775p
iommu/vt-d: Fix race condition during PASID entry replacement
iommu/vt-d: Clear Present bit before tearing down context entry
iommu/vt-d: Clear Present bit before tearing down PASID entry
iommu/vt-d: Flush piotlb for SVM and Nested domain
iommu/vt-d: Flush cache for PASID table before using it
iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in scalable mode
iommu/vt-d: Skip dev-iotlb flush for inaccessible PCIe device without scalable mode
rust: iommu: fix `srctree` link warning
rust: iommu: fix Rust formatting
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
- extend Landlock to enforce restrictions on a whole process, similarly
to the seccomp's TSYNC flag
- refactor data structures to simplify code and improve performance
- add documentation to cover missing parts
* tag 'landlock-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
mailmap: Add entry for Mickaël Salaün
landlock: Transpose the layer masks data structure
landlock: Add access_mask_subset() helper
selftests/landlock: Add filesystem access benchmark
landlock: Document audit blocker field format
landlock: Add errata documentation section
landlock: Add backwards compatibility for restrict flags
landlock: Refactor TCP socket type check
landlock: Minor reword of docs for TCP access rights
landlock: Document LANDLOCK_RESTRICT_SELF_TSYNC
selftests/landlock: Add LANDLOCK_RESTRICT_SELF_TSYNC tests
landlock: Multithreading support for landlock_restrict_self()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild/Kconfig updates from Nathan Chancellor:
"Kbuild:
- Drop '*_probe' pattern from modpost section check allowlist, which
hid legitimate warnings (Johan Hovold)
- Disable -Wtype-limits altogether, instead of enabling at W=2
(Vincent Mailhol)
- Improve UAPI testing to skip testing headers that require a libc
when CONFIG_CC_CAN_LINK is not set, opening up testing of headers
with no libc dependencies to more environments (Thomas Weißschuh)
- Update gendwarfksyms documentation with required dependencies
(Jihan LIN)
- Reject invalid LLVM= values to avoid unintentionally falling back
to system toolchain (Thomas Weißschuh)
- Add a script to help run the kernel build process in a container
for consistent environments and testing (Guillaume Tucker)
- Simplify kallsyms by getting rid of the relative base (Ard
Biesheuvel)
- Performance and usability improvements to scripts/make_fit.py
(Simon Glass)
- Minor various clean ups and fixes
Kconfig:
- Move XPM icons to individual files, clearing up GTK deprecation
warnings (Rostislav Krasny)
- Support
depends on FOO if BAR
as syntactic sugar for
depends on FOO || !BAR
(Nicolas Pitre, Graham Roff)
- Refactor merge_config.sh to use awk over shell/sed/grep,
dramatically speeding up processing large number of config
fragments (Anders Roxell, Mikko Rapeli)"
* tag 'kbuild-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (39 commits)
kbuild: remove dependency of run-command on config
scripts/make_fit: Compress dtbs in parallel
scripts/make_fit: Support a few more parallel compressors
kbuild: Support a FIT_EXTRA_ARGS environment variable
scripts/make_fit: Move dtb processing into a function
scripts/make_fit: Support an initial ramdisk
scripts/make_fit: Speed up operation
rust: kconfig: Don't require RUST_IS_AVAILABLE for rustc-option
MAINTAINERS: Add scripts/install.sh into Kbuild entry
modpost: Amend ppc64 save/restfpr symnames for -Os build
MIPS: tools: relocs: Ship a definition of R_MIPS_PC32
streamline_config.pl: remove superfluous exclamation mark
kbuild: dummy-tools: Add python3
scripts: kconfig: merge_config.sh: warn on duplicate input files
scripts: kconfig: merge_config.sh: use awk in checks too
scripts: kconfig: merge_config.sh: refactor from shell/sed/grep to awk
kallsyms: Get rid of kallsyms relative base
mips: Add support for PC32 relocations in vmlinux
Documentation: dev-tools: add container.rst page
scripts: add tool to run containerized builds
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cpuset changes:
- Continue separating v1 and v2 implementations by moving more
v1-specific logic into cpuset-v1.c
- Improve partition handling. Sibling partitions are no longer
invalidated on cpuset.cpus conflict, cpuset.cpus changes no longer
fail in v2, and effective_xcpus computation is made consistent
- Fix partition effective CPUs overlap that caused a warning on
cpuset removal when sibling partitions shared CPUs
- Increase the maximum cgroup subsystem count from 16 to 32 to
accommodate future subsystem additions
- Misc cleanups and selftest improvements including switching to
css_is_online() helper, removing dead code and stale documentation
references, using lockdep_assert_cpuset_lock_held() consistently, and
adding polling helpers for asynchronously updated cgroup statistics
* tag 'cgroup-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
cpuset: fix overlap of partition effective CPUs
cgroup: increase maximum subsystem count from 16 to 32
cgroup: Remove stale cpu.rt.max reference from documentation
cpuset: replace direct lockdep_assert_held() with lockdep_assert_cpuset_lock_held()
cgroup/cpuset: Move the v1 empty cpus/mems check to cpuset1_validate_change()
cgroup/cpuset: Don't invalidate sibling partitions on cpuset.cpus conflict
cgroup/cpuset: Don't fail cpuset.cpus change in v2
cgroup/cpuset: Consistently compute effective_xcpus in update_cpumasks_hier()
cgroup/cpuset: Streamline rm_siblings_excl_cpus()
cpuset: remove dead code in cpuset-v1.c
cpuset: remove v1-specific code from generate_sched_domains
cpuset: separate generate_sched_domains for v1 and v2
cpuset: move update_domain_attr_tree to cpuset_v1.c
cpuset: add cpuset1_init helper for v1 initialization
cpuset: add cpuset1_online_css helper for v1-specific operations
cpuset: add lockdep_assert_cpuset_lock_held helper
cpuset: Remove unnecessary checks in rebuild_sched_domains_locked
cgroup: switch to css_is_online() helper
selftests: cgroup: Replace sleep with cg_read_key_long_poll() for waiting on nr_dying_descendants
selftests: cgroup: make test_memcg_sock robust against delayed sock stats
...
|
|
Pull workqueue updates from Tejun Heo:
- Rework the rescuer to process work items one-by-one instead of
slurping all pending work items in a single pass.
As there is only one rescuer per workqueue, a single long-blocking
work item could cause high latency for all tasks queued behind it,
even after memory pressure is relieved and regular kworkers become
available to service them.
- Add CONFIG_BOOTPARAM_WQ_STALL_PANIC build-time option and
workqueue.panic_on_stall_time parameter for time-based stall panic,
giving systems more control over workqueue stall handling.
- Replace BUG_ON() with panic() in the stall panic path for clearer
intent and more informative output.
* tag 'wq-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: replace BUG_ON with panic in panic_on_wq_watchdog
workqueue: add time-based panic for stalls
workqueue: add CONFIG_BOOTPARAM_WQ_STALL_PANIC option
workqueue: Process extra works in rescuer on memory pressure
workqueue: Process rescuer work items one-by-one using a cursor
workqueue: Make send_mayday() take a PWQ argument directly
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- amdgpu support for lots of new IP blocks which means newer GPUs
- xe has a lot of SR-IOV and SVM improvements
- lots of intel display refactoring across i915/xe
- msm has more support for gen8 platforms
- Given up on kgdb/kms integration, it's too hard on modern hw
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors
- Use pin_init::zeroed() for fops initialization
- Annotate DRM helpers with __rust_helper
- Improve safety documentation for gem::Object::new()
- Update AlwaysRefCounted imports
- mm: Prevent integer overflow in page_align()
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switch to use virtual planes by default
- Fix DSI CMD panels on DPU 3.x
- Rewrite format handling to remove intermediate representation
- Fix watchdog on DPU 8.x+
- Fix TE / Vsync source setting on DPU 8.x+
- Add 3D_Mux on SC7280
- Kaanapali platform support
- Fix UBWC register programming
- Make RM reserve DSPP-enabled mixers for CRTCs with LMs
- Gamma correction support
- DP:
- Enable support for eDP 1.4+ link rate tables
- Fix MDSS1 DP indices on SA8775P, making them to work
- Fix msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Document QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switch to divider_determine_rate()
- MDP5:
- Drop support for MSM8998, SDM660 and SDM630 (switch over to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation
- Get rid of the Result<impl PinInit<T, E>> anti-pattern
- Relocate initializer-specific code into the appropriate initializer
- Use CStr::from_bytes_until_nul() to remove custom helpers
- Improve handling of unexpected firmware values
- Clean up redundant debug prints
- Replace c_str!() with native Rust C-string literals
- Update nova-core task list
nova:
- Align GEM object size to system page size
tyr:
- Use generated uAPI bindings for GpuInfo
- Replace manual sleeps with read_poll_timeout()
- Replace c_str!() with native Rust C-string literals
- Suppress warnings for unread fields
- Fix incorrect register name in print statement
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
* tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel: (1610 commits)
drm/xe/pm: Disable D3Cold for BMG only on specific platforms
drm/xe: Fix kerneldoc for xe_tlb_inval_job_alloc_dep
drm/xe: Fix kerneldoc for xe_gt_tlb_inval_init_early
drm/xe: Fix kerneldoc for xe_migrate_exec_queue
drm/xe/query: Fix topology query pointer advance
drm/xe/guc: Fix kernel-doc warning in GuC scheduler ABI header
drm/xe/guc: Fix CFI violation in debugfs access.
accel/amdxdna: Move RPM resume into job run function
accel/amdxdna: Fix incorrect DPM level after suspend/resume
nouveau/vmm: start tracking if the LPT PTE is valid. (v6)
nouveau/vmm: increase size of vmm pte tracker struct to u32 (v2)
nouveau/vmm: rewrite pte tracker using a struct and bitfields.
accel/amdxdna: Fix incorrect error code returned for failed chain command
accel/amdxdna: Remove hardware context status
drm/bridge: imx8qxp-pixel-combiner: Fix bailout for imx8qxp_pc_bridge_probe()
drm/panel: ilitek-ili9882t: Remove duplicate initializers in tianma_il79900a_dsc
drm/i915/display: fix the pixel normalization handling for xe3p_lpd
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Add support for GMSL1 and GMSL‑coax modules (PCI mgb4)
- Add driver for TI VIP
- AV1 – first kernel support (pixel‑format, decoder, transcoder)
- Three new camera‑sensor drivers (os05b10, s5k3m5, s5kjn1)
- Synopsys CSI‑2 receiver driver
- Verisilicon & rkvdec – major fixes and enhancements
- IPU6 (and 7) fixes and preparation for metadata
- omap3isp: v4l2-compliance updates
- Fix DVB streaming, drop wait_prepare/finish (dvb/vb2)
* tag 'media/v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (307 commits)
media: uvcvideo: Pass allocation size directly to uvc_alloc_urb_buffer
media: uvcvideo: Fix allocation for small frame sizes
media: uvcvideo: Return queued buffers on start_streaming() failure
media: uvcvideo: Create an ID namespace for streaming output terminals
media: rkvdec: Add HEVC support for the VDPU383 variant
media: rkvdec: Add HEVC support for the VDPU381 variant
media: rkvdec: Add H264 support for the VDPU383 variant
media: rkvdec: Add H264 support for the VDPU381 variant
media: rkvdec: Disable multicore support
media: rkvdec: Enable all clocks without naming them
media: rkvdec: Support per-variant interrupt handler
media: rkvdec: Add RCB and SRAM support
media: rkvdec: Add variant specific coded formats list
media: rkvdec: Move hevc functions to common file
media: rkvdec: Move h264 functions to common file
media: rkvdec: Use structs to represent the HW RPS
media: rkvdec: Move cabac tables to their own source file
media: rkvdec: Switch to using structs instead of writel
media: visl: Add HEVC short and long term RPS sets
media: v4l2-ctrls: Add hevc_ext_sps_[ls]t_rps controls
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been relatively calm for a new era; majority of changes are for
ASoC, mostly device-specific changes, while there are a bit of
cleanups in core stuff. A few SPI API and regmap updates are included
to be used by sound drivers, too.
Core:
- A few trivial cleanups about __free() and runtime PM macros
- Convert to new snd_seq_bus binding
ASoC:
- Generic SDCA support for reporting jack events
- Continuing platform support, cleanup and feature improvements for
AMD, Intel, Qualcomm and SOF code
- Platform description improvements for the Cirrus drivers
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B
HD- and USB-audio:
- Many quirks as usual"
* tag 'sound-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits)
ALSA: usb-audio: Add DSD support for iBasso DC04U
ALSA: mixer: oss: Add card disconnect checkpoints
ASoC: SOF: ipc4-control: Set correct error code in refresh_bytes_control
ASoC: SOF: Intel: select CONFIG_SND_HDA_EXT_CORE from SND_SOC_SOF_HDA_COMMON
ALSA: usb-audio: Add iface reset and delay quirk for AB13X USB Audio
ASoC: amd: maintainer information
ALSA: ctxfi: Add quirk for SE-300PCIE variant (160b:0102)
ALSA: hda/generic: fix typos in comments
ALSA: hda/realtek - Enable mute LEDs on HP ENVY x360 15-es0xxx
ALSA: hda/conexant: Add quirk for HP ZBook Studio G4
ASoC: fsl_asrc_dma: allocate memory from dma device
ASoC: fsl_asrc: Add support for i.MX952 platform
ASoC: fsl_asrc_m2m: Add option to start ASRC before DMA device for M2M
ASoC: dt-bindings: fsl,imx-asrc: Add support for i.MX952 platform
ALSA: oss: delete self assignment
ASoC: rockchip: spdif: Convert to FIELD_PREP
ASoC: rockchip: spdif: Fill IEC958 CS info per params
ASoC: rockchip: spdif: Add support for format S32_LE
ASoC: rockchip: spdif: Add support for set mclk rate
ASoC: rockchip: spdif: Swap PCM and DAI component registration order
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- global switch of HID drivers to use pm_*ptr instead of #ifdef
CONFIG_PM* (Bastien Nocera)
- support for new firmware handling in intel-ish-hid (Vishnu Sankar)
- support for HID output reports in the Quicki2c in intel-thc (Even Xu)
- solidify register configuration updates in intel-thc (Even Xu)
- Support for Rock band 4 PS4 and PS5 guitars (Rosalie Wanders)
- fn lock and WMI fan control handling improvements in certain Asus
models (ROG, ProArt P16) (Ionut Nechita, Connor Belli)
- fix for potential NULL pointer dereference during warm reset in
intel-ish-hid (Ryan Lin)
- fix for potential NULL pointer derefence in probe error paths in
hid-pl (Oliver Neukum)
- various other small assorted fixes and new device ID additions /
device-specific quirks
* tag 'hid-for-linus-2026020901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (41 commits)
HID: sony: add dongle device IDs for CRKD Gibson SG
HID: Intel-thc-hid: Intel-thc: Fix wrong register fields updating
HID: intel-ish-hid: fix NULL-ptr-deref in ishtp_bus_remove_all_clients
HID: logitech-hidpp: Add support for Logitech K980
HID: logitech-dj: Differentiate "invalid device index" error
HID: sony: Use pm_ptr instead of #ifdef CONFIG_PM
HID: wacom: Use pm_ptr instead of #ifdef CONFIG_PM
HID: uclogic: Use pm_ptr instead of #ifdef CONFIG_PM
HID: hid-sensor-hub: Use pm_ptr instead of #ifdef CONFIG_PM
HID: picolcd_core: Use pm_ptr instead of #ifdef CONFIG_PM
HID: nintendo: Use pm_ptr instead of #ifdef CONFIG_PM
HID: logitech-dj: Use pm_ptr instead of #ifdef CONFIG_PM
HID: lenovo: Use pm_ptr instead of #ifdef CONFIG_PM
HID: asus: Use pm_ptr instead of #ifdef CONFIG_PM
HID: appletb-kbd: Use pm_ptr instead of #ifdef CONFIG_PM
HID: hid-alps: Use pm_ptr instead of #ifdef CONFIG_PM
HID: multitouch: add eGalaxTouch EXC3188 support
HID: elecom: Add support for ELECOM HUGE Plus M-HT1MRBK
HID: sony: add support for bluetooth Rock Band 4 PS4 guitars
HID: logitech-hidpp: Check maxfield in hidpp_get_report_length()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New PMBus drivers:
- HiTRON HAC300S power supply
- Monolithic MP5926 Hot-Swap Controller
- STEF48H28 hot-swap controller
Support for new chips in existing drivers
- Support for Pro WS TRX50-SAGE WIFI A and ROG MAXIMUS X HERO
(asus-ec-sensors)
- Support for Dell OptiPlex 7080 (dell-smm)
- Support for F81968 (f71882fg)
- Support for Micro PC 2 (gpd-fan)
- New customer ID for ASRock Z590 Taichi (nct6683)
- Support for ASUS Pro WS WRX90E-SAGE SE (nct6775)
- Support for SHT85 (sht3x)
- Support for P3T1035 and P3T2030 (tmp108)
Bug fixes:
- Revert "fix" for UAF which didn't fix a UAF but introduced a race
condition resulting in a NULL pointer crash (ibmpex)
- Fix failure to instantiate driver if the chip is configured for VID
mode (pmbus/mpq8785)
- Use READ/WRITE_ONCE to avoid compiler optimization induced race
(max16065)
- Resource leak fixes (nct7363, emc2305)
Other notable changes:
- Support for temperature limit thresholds (cros_ec)
- Add TjMax for Silvermont through Tremont Atoms (coretemp)
Various other minor improvements"
* tag 'hwmon-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (42 commits)
hwmon: (pmbus/mpq8785) fix VOUT_MODE mismatch during identification
Revert "hwmon: (ibmpex) fix use-after-free in high/low store"
hwmon: (max16065) Use READ/WRITE_ONCE to avoid compiler optimization induced race
hwmon: (nct6775) use sysfs_emit instead of sprintf
hwmon: pmbus: fix table in STEF48H28 documentation
hwmon: Add support for HiTRON HAC300S PSU
dt-bindings: trivial-devices: Add hitron,hac300s
hwmon: (cros_ec) Add support for temperature thresholds
hwmon: (cros_ec) Move temperature channel params to a macro
hwmon: (cros_ec) Add support for fan target speed
hwmon: (cros_ec) Split up supported features in the documentation
hwmon: (tmp108) Add P3T1035 and P3T2030 support
hwmon: (tmp108) Add support for P3T1035 and P3T2030
dt-bindings: hwmon: ti,tmp108: Add P3T1035,P3T2030
hwmon: pmbus: add support for STEF48H28
dt-bindings: hwmon: add STEF48H28
hwmon: (nct7363) Fix a resource leak in nct7363_present_pwm_fanin
hwmon: (emc2305) Fix a resource leak in emc2305_of_parse_pwm_child
hwmon: (gpd-fan) add support for Micro PC 2
hwmon: (coretemp) Add TjMax for Silvermont through Tremont Atoms
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and some changes to GPIO core but mostly
just GPIO driver updates across a wide array of files, adding support
for new models as well as various refactoring changes. Nothing
controversial and everything has spent a good measure of time in
linux-next.
GPIOLIB core:
- shrink the GPIO bus driver stub code
- rework software node support for "undefined" software nodes
- provide and use devm_fwnode_gpiod_get_optional()
- only compile the OF quirk for MT2701 when needed
New drivers:
- add the GPIO driver for ROHM bd72720
- add the gpio-line-mux driver providing 1-to-many mapping for a
single real GPIO
Driver changes:
- refactor gpio-pca9570: use lock guard, add missing headers, use
devres consistently
- add support for a new model (G7 Aspeed sgpiom) to the aspeed-sgpio
driver along with some prerequisite refactoring
- use device_get_match_data() where applicable and save some lines
- add support for more models to gpio-cadence
- add the compatible property to reset-gpio and use it in shared GPIO
management
- drop unnecessary use of irqd_get_trigger_type() in gpio-max77759
- add support for a new variant to gpio-pca953x
- extend build coverage with COMPILE_TEST for more drivers
- constify configfs structures in gpio-sim and gpio-virtuser
- add support for the K3 SoC to gpio-spacemit
- implement the missing .get_direction() callback in gpio-max77620
- add support for Tegra264 to gpio-tegra186
- drop unneeded MODULE_ALIAS() from gpio-menz127
DT bindings:
- document support for the opencores GPIO controller in gpio-mmio
- document new variants for gpio-pca953x
Documentation:
- extensively describe interrupt source detection for gpio-pca953x
and add more models to the list of supported variants"
* tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
gpio: tegra186: Add support for Tegra264
dt-bindings: gpio: Add Tegra264 support
gpio: spacemit-k1: Use PDR for pin direction, not SDR/CDR
gpio: max77620: Implement .get_direction() callback
gpio: aspeed-sgpio: Support G7 Aspeed sgpiom controller
dt-bindings: gpio: aspeed,sgpio: Support ast2700
gpio: aspeed-sgpio: Convert IRQ functions to use llops callbacks
gpio: aspeed-sgpio: Create llops to handle hardware access
gpio: aspeed-sgpio: Remove unused bank name field
gpio: aspeed-sgpio: Change the macro to support deferred probe
regulator: bd71815: switch to devm_fwnode_gpiod_get_optional
gpiolib: introduce devm_fwnode_gpiod_get_optional() wrapper
gpio: mmio: Add compatible for opencores GPIO
dt-bindings: gpio-mmio: Correct opencores GPIO
gpio: pca9570: use lock guards
gpio: pca9570: Don't use "proxy" headers
gpio: pca9570: Use devm_mutex_init() for mutex initialization
MAINTAINERS: Add ROHM BD72720 PMIC
power: supply: bd71828-power: Support ROHM BD72720
power: supply: bd71828: Support wider register addresses
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing updates from Bartosz Golaszewski:
"One new driver and support for more models added to the existing
qcom-wcn driver as well as some minor tweaks and fixes.
New drivers:
- add the power sequencing driver for PCIe M.2 connectors
Driver improvements:
- use device_get_match_data() where applicable
- add support for the WCN39xx family of models to pwrseq-qcom-wcn
Fixes:
- fix a locking issue in pwrseq core
- fix retval check in pwrseq-qcom-wcn"
* tag 'pwrseq-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: qcom-wcn: fix error path for VDDIO handling
power: sequencing: fix missing state_lock in pwrseq_power_on() error path
power: sequencing: Add the Power Sequencing driver for the PCIe M.2 connectors
dt-bindings: connector: Add PCIe M.2 Mechanical Key M connector
power: sequencing: qcom-wcn: add support for WCN39xx
regulator: dt-bindings: qcom,wcn3990-pmu: describe PMUs on WCN39xx
power: sequencing: qcom-wcn: use device_get_match_data()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"There are a few patches adapting to changes in Rust land which seems
to be the norm since there is a pwm driver written in Rust. Other than
that just a few cleanups and a single fix for the tiehrpwm driver that
came in too late for making it into v6.19.
Thanks to Andy Shevchenko, Bartosz Golaszewski, Daniel Almeida and
Michal Wilczynski for reviews in this cycle, and to Alice Ryhl, Ben
Zong-You Xie, Gokul Praveen, Kari Argillander, Markus Probst, Raag
Jadav, Shankari Anand, Tamir Duberstein and Vladimir Zapolskiy for
code contributions"
* tag 'pwm/for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: Remove redundant check in pwm_ops_check()
pwm: tiehrpwm: Enable pwmchip's parent device before setting configuration
pwm: Update MAINTAINER entry
rust: pwm: Add __rust_helper to helpers
rust: pwm: Simplify to_result call sites and unsafe blocks
rust: pwm: Fix potential memory leak on init error
dt-bindings: pwm: nxp,lpc32xx-pwm: Specify clocks property as mandatory
pwm: th1520: Replace `kernel::c_str!` with C-Strings
pwm: dwc: Use size macro
pwm: Emit native configuration in /sys/kernel/debug/pwm
rust: pwm: Add UnregisteredChip wrapper around Chip
rust: pwm: Update ARef and AlwaysRefCounted imports to use sync::aref
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The highlight here is that David Lechner has added support for
multi-lane SPI devices. Unlike the existing dual/quad SPI support this
is for devices (typically ADCs/DACs) which support multiple
independent data streams over multiple data lanes, instead of sending
one data stream N times as fast they simultaneously transfer N
different data streams.
This is very similar to the case where multiple devices are grouped
together but in this case it's a single device in a way that's visible
to software.
Otherwise there's been quite a bit of work on existing drivers, both
cleanup and feature improvement, and a reasonable collection of new
drivers.
- Support for multi-lane SPI devices
- Preparatory work for some memory mapped flash improvements that
will happen in the MTD subsystem
- Several conversions to fwnode APIs
- A bunch of cleanup and hardening work on the ST drivers
- Support for DMA mode on Renesas RZV2H and i.MX target mode
- Support for ATCSPI200, AXIADO AX300, NXP XPI and Renesas RZ/N1"
* tag 'spi-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (108 commits)
spi: tools: Add include folder to .gitignore
spi: cadence-qspi: Add support for the Renesas RZ/N1 controller
spi: cadence-qspi: Kill cqspi_jh7110_clk_init
spi: dt-bindings: cdns,qspi-nor: Add Renesas RZ/N1D400 to the list
spi: geni-qcom: Add target abort support
spi: geni-qcom: Drop unused msg parameter from timeout handlers
spi: geni-qcom: Fix abort sequence execution for serial engine errors
spi: geni-qcom: Improve target mode allocation by using proper allocation functions
spi: xilinx: use device property accessors.
dt-bindings: spi: Add binding for Faraday FTSSP010
spi: axi-spi-engine: support SPI_MULTI_LANE_MODE_STRIPE
spi: dt-bindings: adi,axi-spi-engine: add multi-lane support
spi: Documentation: add page on multi-lane support
spi: add multi_lane_mode field to struct spi_transfer
spi: support controllers with multiple data lanes
spi: dt-bindings: add spi-{tx,rx}-lane-map properties
spi: dt-bindings: change spi-{rx,tx}-bus-width to arrays
spi: dw: Remove not-going-to-be-supported code for Baikal SoC
spi: cadence-qspi: Use a default value for cdns,fifo-width
spi: cadence-qspi: Make sure write protection is disabled
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"There's a bunch of new drivers here, plus a lot of hardening for the
supply resolution code which allow us to support systems where we have
two PMICs each of which has regulators supplied by the other. This did
work a long time ago but got broken as part of improved integration
with the device model, it's fairly rare so nobody noticed.
- Improvements for supply handling from André Draszik to allow
systems with two PMICs with supply/consumer relationships in both
directions to instantiate.
- New drivers for Maxim MAX776750, Realtek RT8902, Samsung S2MPG11,
Texas Instuments TPS65185.
This have also pulls in some MFD updates which are build dependencies
for the Samsung S2MPG11 support"
* tag 'regulator-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (42 commits)
regulator: s2mps11: more descriptive gpio consumer name
regulator: s2mps11: add S2MPG11 regulator
regulator: s2mps11: refactor S2MPG10 regulator macros for S2MPG11 reuse
regulator: s2mps11: refactor S2MPG10 ::set_voltage_time() for S2MPG11 reuse
regulator: s2mps11: add S2MPG10 regulator
regulator: s2mps11: refactor handling of external rail control
regulator: s2mps11: update node parsing (allow -supply properties)
regulator: s2mps11: place constants on right side of comparison tests
regulator: s2mps11: use dev_err_probe() where appropriate
regulator: s2mps11: drop two needless variable initialisations
regulator: add REGULATOR_LINEAR_VRANGE macro
regulator: dt-bindings: add s2mpg11-pmic regulators
regulator: dt-bindings: add s2mpg10-pmic regulators
dt-bindings: firmware: google,gs101-acpm-ipc: convert regulators to lowercase
mfd: sec: Add support for S2MPG11 PMIC via ACPM
mfd: sec: s2mpg10: Reorder regulators for better probe performance
dt-bindings: mfd: Add samsung,s2mpg11-pmic
dt-bindings: mfd: samsung,s2mpg10-pmic: Link to its regulators
dt-bindings: mfd: samsung,s2mps11: Split s2mpg10-pmic into separate file
mfd: sec: Drop now unused struct sec_pmic_dev::irq_data
...
|
|
Merge in late fixes in preparation for the net-next PR.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add documentation and an example for MaxLinear MxL86282 and MxL86252
switches.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/22a6a3c8c15b932ff4b7d0cd8863939f06a0c2b4.1770433307.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates for 7.0
- Implement masked user access
- Add bpf support for internal only per-CPU instructions and inline the
bpf_get_smp_processor_id() and bpf_get_current_task() functions
- Fix pSeries MSI-X allocation failure when quota is exceeded
- Fix recursive pci_lock_rescan_remove locking in EEH event handling
- Support tailcalls with subprogs & BPF exceptions on 64bit
- Extend "trusted" keys to support the PowerVM Key Wrapping Module
(PKWM)
Thanks to Abhishek Dubey, Christophe Leroy, Gaurav Batra, Guangshuo Li,
Jarkko Sakkinen, Mahesh Salgaonkar, Mimi Zohar, Miquel Sabaté Solà, Nam
Cao, Narayana Murty N, Nayna Jain, Nilay Shroff, Puranjay Mohan, Saket
Kumar Bhaskar, Sourabh Jain, Srish Srinivasan, and Venkat Rao Bagalkote.
* tag 'powerpc-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (27 commits)
powerpc/pseries: plpks: export plpks_wrapping_is_supported
docs: trusted-encryped: add PKWM as a new trust source
keys/trusted_keys: establish PKWM as a trusted source
pseries/plpks: add HCALLs for PowerVM Key Wrapping Module
pseries/plpks: expose PowerVM wrapping features via the sysfs
powerpc/pseries: move the PLPKS config inside its own sysfs directory
pseries/plpks: fix kernel-doc comment inconsistencies
powerpc/smp: Add check for kcalloc() failure in parse_thread_groups()
powerpc: kgdb: Remove OUTBUFMAX constant
powerpc64/bpf: Additional NVR handling for bpf_throw
powerpc64/bpf: Support exceptions
powerpc64/bpf: Add arch_bpf_stack_walk() for BPF JIT
powerpc64/bpf: Avoid tailcall restore from trampoline
powerpc64/bpf: Support tailcalls with subprogs
powerpc64/bpf: Moving tail_call_cnt to bottom of frame
powerpc/eeh: fix recursive pci_lock_rescan_remove locking in EEH event handling
powerpc/pseries: Fix MSI-X allocation failure when quota is exceeded
powerpc/iommu: bypass DMA APIs for coherent allocations for pre-mapped memory
powerpc64/bpf: Inline bpf_get_smp_processor_id() and bpf_get_current_task/_btf()
powerpc64/bpf: Support internal-only MOV instruction to resolve per-CPU addrs
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are a handful of new SoCs this time, all of these are more or
less related to chips in a wider family:
- SpacemiT Key Stone K3 is an 8-core risc-v chip, and the first
widely available RVA23 implementation. Note that this is entirely
unrelated with the similarly named Texas Instruments K3 chip family
that follwed the TI Keystone2 SoC.
- The Realtek Kent family of SoCs contains three chip models
rtd1501s, rtd1861b and rtd1920s, and is related to their earlier
Set-top-box and NAS products such as rtd1619, but is built on newer
Arm Cortex-A78 cores.
- The Qualcomm Milos family includes the Snapdragon 7s Gen 3 (SM7635)
mobile phone SoC built around Armv9 Kryo cores of the Arm
Cortex-A720 generation. This one is used in the Fairphone Gen 6
- Qualcomm Kaanapali is a new SoC based around eight high performance
Oryon CPU cores
- NXP i.MX8QP and i.MX952 are both feature reduced versions of chips
we already support, i.e. the i.MX8QM and i.MX952, with fewer CPU
cores and I/O interfaces.
As part of a cleanup, a number of SoC specific devicetree files got
removed because they did not have a single board using the .dtsi files
and they were never compile tested as a result: Samsung s3c6400, ST
spear320s, ST stm32mp21xc/stm32mp23xc/stm32mp25xc, Renesas
r8a779m0/r8a779m2/r8a779m4/r8a779m6/r8a779m7/r8a779m8/r8a779mb/
r9a07g044c1/r9a07g044l1/r9a07g054l1/r9a09g047e37, and TI
am3703/am3715. All of these could be restored easily if a new board
gets merged.
Broadcom/Cavium/Marvell ThunderX2 gets removed along with its only
machine, as all remaining users are assumed to be using ACPI based
firmware.
A relatively small number of 43 boards get added this time, and almost
all of them for arm64. Aside from the reference boards for the newly
added SoCs, this includes:
- Three server boards use 32-bit ASpeed BMCs
- One more reference board for 32-bit Microchip LAN9668
- 64-bit Arm single-board computers based on Amlogic s905y4, CIX
sky1, NXP ls1028a/imx8mn/imx8mp/imx91/imx93/imx95, Qualcomm
qcs6490/qrb2210 and Rockchip rk3568/rk3588s
- Carrier board for SOMs using Intel agilex5, Marvell Armada 7020,
NXP iMX8QP, Mediatek mt8370/mt8390 and rockchip rk3588
- Two mobile phones using Snapdragon 845
- A gaming device and a NAS box, both based on Rockchips rk356x
On top of the newly added boards and SoCs, there is a lot of
background activity going into cleanups, in particular towards getting
a warning-free dtc build, and the usual work on adding support for
more hardware on the previously added machines"
* tag 'soc-dt-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (757 commits)
dt-bindings: intel: Add Agilex eMMC support
arm64: dts: socfpga: agilex: add emmc support
arm64: dts: intel: agilex5: Add simple-bus node on top of dma controller node
ARM: dts: socfpga: fix dtbs_check warning for fpga-region
ARM: dts: socfpga: add #address-cells and #size-cells for sram node
dt-bindings: altera: document syscon as fallback for sys-mgr
arm64: dts: altera: Use lowercase hex
dt-bindings: arm: altera: combine Intel's SoCFPGA into altera.yaml
arm64: dts: socfpga: agilex5: Add IOMMUS property for ethernet nodes
arm64: dts: socfpga: agilex5: add support for modular board
dt-bindings: intel: Add Agilex5 SoCFPGA modular board
arm64: dts: socfpga: agilex5: Add dma-coherent property
arm64: dts: realtek: Add Kent SoC and EVB device trees
dt-bindings: arm: realtek: Add Kent Soc family compatibles
ARM: dts: samsung: Drop s3c6400.dtsi
ARM: dts: nuvoton: Minor whitespace cleanup
MAINTAINERS: Add Falcon DB
arm64: dts: a7k: add COM Express boards
ARM: dts: microchip: Drop usb_a9g20-dab-mmx.dtsi
arm64: dts: rockchip: Fix rk3588 PCIe range mappings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are are a number of to firmware drivers, in particular the TEE
subsystem:
- a bus callback for TEE firmware that device drivers can register to
- sysfs support for tee firmware information
- minor updates to platform specific TEE drivers for AMD, NXP,
Qualcomm and the generic optee driver
- ARM SCMI firmware refactoring to improve the protocol discover
among other fixes and cleanups
- ARM FF-A firmware interoperability improvements
The reset controller and memory controller subsystems gain support for
additional hardware platforms from Mediatek, Renesas, NXP, Canaan and
SpacemiT.
Most of the other changes are for random drivers/soc code. Among a
number of cleanups and newly added hardware support, including:
- Mediatek MT8196 DVFS power management and mailbox support
- Qualcomm SCM firmware and MDT loader refactoring, as part of the
new Glymur platform support.
- NXP i.MX9 System Manager firmware support for accessing the syslog
- Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD
SoCs"
* tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (171 commits)
bus: fsl-mc: fix an error handling in fsl_mc_device_add()
reset: spacemit: Add SpacemiT K3 reset driver
reset: spacemit: Extract common K1 reset code
reset: Create subdirectory for SpacemiT drivers
dt-bindings: soc: spacemit: Add K3 reset support and IDs
reset: canaan: k230: drop OF dependency and enable by default
reset: rzg2l-usbphy-ctrl: Add suspend/resume support
reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits()
reset: gpio: check the return value of gpiod_set_value_cansleep()
reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV
reset: imx8mp-audiomix: Extend the driver usage
reset: imx8mp-audiomix: Switch to using regmap API
reset: imx8mp-audiomix: Drop unneeded macros
soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove
soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses
soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID
soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support
soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create()
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Dave Hansen:
"The usual smattering of x86/misc changes.
The IPv6 patch in here surprised me in a couple of ways. First, the
function it inlines is able to eat a lot more CPU time than I would
have expected. Second, the inlining does not seem to bloat the kernel,
at least in the configs folks have tested.
- Inline x86-specific IPv6 checksum helper
- Update IOMMU docs to use stable identifiers
- Print unhashed pointers on fatal stack overflows"
* tag 'x86_misc_for_7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/traps: Print unhashed pointers on stack overflow
Documentation/x86: Update IOMMU spec references to use stable identifiers
x86/lib: Inline csum_ipv6_magic()
|
|
fsl,imx(1|25|27|31|35)-avic
Add compatiblie string fsl,imx(1|25|27|31|35)-avic for i.MX3 SoCs (over 15
years old).
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260210221215.1575844-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Extend the resctrl machinery to support telemetry monitoring on
Intel (Tony Luck)
The practical usage of this is being able to tell how much energy or
how much work can be attributed to a group of tasks tracked under a
single idenitifier. Prepend this work with proper refactoring of
resctrl domains handling code.
* tag 'x86_cache_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
x86,fs/resctrl: Update documentation for telemetry events
x86/resctrl: Enable RDT_RESOURCE_PERF_PKG
fs/resctrl: Move RMID initialization to first mount
x86,fs/resctrl: Compute number of RMIDs as minimum across resources
fs/resctrl: Move allocation/free of closid_num_dirty_rmid[]
x86/resctrl: Handle number of RMIDs supported by RDT_RESOURCE_PERF_PKG
x86/resctrl: Add energy/perf choices to rdt boot option
x86,fs/resctrl: Handle domain creation/deletion for RDT_RESOURCE_PERF_PKG
fs/resctrl: Refactor rmdir_mondata_subdir_allrdtgrp()
fs/resctrl: Refactor mkdir_mondata_subdir()
x86/resctrl: Read telemetry events
x86/resctrl: Find and enable usable telemetry events
x86,fs/resctrl: Add architectural event pointer
x86,fs/resctrl: Fill in details of events for performance and energy GUIDs
x86/resctrl: Discover hardware telemetry events
fs/resctrl: Emphasize that L3 monitoring resource is required for summing domains
x86,fs/resctrl: Add and initialize a resource for package scope monitoring
x86,fs/resctrl: Add an architectural hook called for first mount
x86,fs/resctrl: Support binary fixed point event counters
x86,fs/resctrl: Handle events that can be read from any CPU
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 bug documentation update from Borislav Petkov:
- Add EPERM to the possible PR_SET_SPECULATION_CTRL pr_ctl() error
codes to "legitimize" it
* tag 'x86_bugs_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/x86: Fix PR_SET_SPECULATION_CTRL error codes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq chip driver updates from Thomas Gleixner:
- Add support for the Renesas RZ/V2N SoC
- Add a new driver for the Renesas RZ/[TN]2H SoCs
- Preserve the register state of the RISCV APLIC interrupt controller
accross suspend/resume
- Reinitialize the RISCV IMSIC registers after suspend/resume
- Make the various Loongson interrupt chip drivers 32/64-bit aware
- Handle the number of hardware interrupts in the SIFIVE PLIC driver
correctly
The hardware interrupt 0 is reserved which resulted in inconsistent
accounting. That went unnoticed as the off by one is only noticable
when the number of device interrupts is a multiple of 32
- The usual device tree updates, cleanups and improvements all over the
place
* tag 'irq-drivers-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
irqchip/gic-v5: Fix spelling mistake "ouside" -> "outside"
dt-bindings: interrupt-controller: sifive,plic: Clarify the riscv,ndev meaning in PLIC
irqchip/sifive-plic: Handle number of hardware interrupts correctly
irqchip/aspeed-scu-ic: Remove unused variable mask
irqchip/ti-sci-intr: Allow parsing interrupt-types per-line
dt-bindings: interrupt-controller: ti,sci-intr: Per-line interrupt-types
irqchip/renesas-rzv2h: Add suspend/resume support
irqchip/aslint-sswi: Fix error check of of_io_request_and_map() result
irqchip: Allow LoongArch irqchip drivers on both 32BIT/64BIT
irqchip/loongson-pch-pic: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-pch-msi: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-htvec: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-eiointc: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-liointc: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongarch-avec: Adjust irqchip driver for 32BIT/64BIT
irqchip/riscv-aplic: Preserve APLIC states across suspend/resume
irqchip/riscv-imsic: Add a CPU pm notifier to restore the IMSIC on exit
arm64: dts: renesas: r9a09g087: Add ICU support
arm64: dts: renesas: r9a09g077: Add ICU support
irqchip: Add RZ/{T2H,N2H} Interrupt Controller (ICU) driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/boot updates from Ingo Molnar:
- x86/acpi: Add acpi=spcr to use SPCR-provided default console
(Shenghao Yang)
- x86/acpi/boot: Correct the acpi_is_processor_usable() check again
(Yazen Ghannam)
- Refresh the x86 memory map (e820 table) handling code, and make the
printouts a bit more informative (Ingo Molnar)
* tag 'x86-boot-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
x86/acpi: Add acpi=spcr to use SPCR-provided default console
x86/boot/e820: Use <linux/sizes.h> symbols for literals
x86/boot/e820: Make sure e820_search_gap() finds all gaps
x86/boot/e820: Simplify the e820__range_remove() API
x86/boot/e820: Remove e820__range_remove()'s unused return parameter
x86/boot/e820: Simplify append_e820_table() and remove restriction on single-entry tables
x86/boot/e820: Standardize __init/__initdata tag placement
x86/boot/e820: Simplify & clarify __e820__range_add() a bit
x86/boot/e820: Rename gap_start/gap_size to max_gap_start/max_gap_start in e820_search_gap() et al
x86/boot/e820: Change e820_search_gap() to search for the highest-address PCI gap
x86/boot/e820: Clean up e820__setup_pci_gap()/e820_search_gap() a bit
x86/boot/e820: Change struct e820_table::nr_entries type from __u32 to u32
x86/boot/e820: Standardize e820 table index variable types under 'u32'
x86/boot/e820: Standardize e820 table index variable names under 'idx'
x86/boot/e820: Remove unnecessary header inclusions
x86/boot/e820: Clean up __refdata use a bit
x86/boot/e820: Clean up __e820__range_add() a bit
x86/boot/e820: Improve e820_print_type() messages
x86/boot/e820: Clean up confusing and self-contradictory verbiage around E820 related resource allocations
x86/boot/e820: Remove pointless early_panic() indirection
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Scheduler Kconfig space updates:
- Further consolidate configurable preemption modes (Peter Zijlstra)
Reduce the number of architectures that are allowed to offer
PREEMPT_NONE and PREEMPT_VOLUNTARY, reducing the number of
preemption models from four to just two: 'full' and 'lazy' on
up-to-date architectures (arm64, loongarch, powerpc, riscv, s390,
x86).
None and voluntary are only available as legacy features on
platforms that don't implement lazy preemption yet, or which don't
even support preemption.
The goal is to eventually remove cond_resched() and voluntary
preemption altogether.
RSEQ based 'scheduler time slice extension' support (Thomas Gleixner
and Peter Zijlstra):
This allows a thread to request a time slice extension when it enters
a critical section to avoid contention on a resource when the thread
is scheduled out inside of the critical section.
- Add fields and constants for time slice extension
- Provide static branch for time slice extensions
- Add statistics for time slice extensions
- Add prctl() to enable time slice extensions
- Implement sys_rseq_slice_yield()
- Implement syscall entry work for time slice extensions
- Implement time slice extension enforcement timer
- Reset slice extension when scheduled
- Implement rseq_grant_slice_extension()
- entry: Hook up rseq time slice extension
- selftests: Implement time slice extension test
- Allow registering RSEQ with slice extension
- Move slice_ext_nsec to debugfs
- Lower default slice extension
- selftests/rseq: Add rseq slice histogram script
Scheduler performance/scalability improvements:
- Update rq->avg_idle when a task is moved to an idle CPU, which
improves the scalability of various workloads (Shubhang Kaushik)
- Reorder fields in 'struct rq' for better caching (Blake Jones)
- Fair scheduler SMP NOHZ balancing code speedups (Shrikanth Hegde):
- Move checking for nohz cpus after time check
- Change likelyhood of nohz.nr_cpus
- Remove nohz.nr_cpus and use weight of cpumask instead
- Avoid false sharing for sched_clock_irqtime (Wangyang Guo)
- Cleanups (Yury Norov):
- Drop useless cpumask_empty() in find_energy_efficient_cpu()
- Simplify task_numa_find_cpu()
- Use cpumask_weight_and() in sched_balance_find_dst_group()
DL scheduler updates:
- Add a deadline server for sched_ext tasks (by Andrea Righi and Joel
Fernandes, with fixes by Peter Zijlstra)
RT scheduler updates:
- Skip currently executing CPU in rto_next_cpu() (Chen Jinghuang)
Entry code updates and performance improvements (Jinjie Ruan)
This is part of the scheduler tree in this cycle due to inter-
dependencies with the RSEQ based time slice extension work:
- Remove unused syscall argument from syscall_trace_enter()
- Rework syscall_exit_to_user_mode_work() for architecture reuse
- Add arch_ptrace_report_syscall_entry/exit()
- Inline syscall_exit_work() and syscall_trace_enter()
Scheduler core updates (Peter Zijlstra):
- Rework sched_class::wakeup_preempt() and rq_modified_*()
- Avoid rq->lock bouncing in sched_balance_newidle()
- Rename rcu_dereference_check_sched_domain() =>
rcu_dereference_sched_domain()
- <linux/compiler_types.h>: Add the __signed_scalar_typeof() helper
Fair scheduler updates/refactoring (Peter Zijlstra and Ingo Molnar):
- Fold the sched_avg update
- Change rcu_dereference_check_sched_domain() to rcu-sched
- Switch to rcu_dereference_all()
- Remove superfluous rcu_read_lock()
- Limit hrtick work
- Join two #ifdef CONFIG_FAIR_GROUP_SCHED blocks
- Clean up comments in 'struct cfs_rq'
- Separate se->vlag from se->vprot
- Rename cfs_rq::avg_load to cfs_rq::sum_weight
- Rename cfs_rq::avg_vruntime to ::sum_w_vruntime & helper functions
- Introduce and use the vruntime_cmp() and vruntime_op() wrappers for
wrapped-signed aritmetics
- Sort out 'blocked_load*' namespace noise
Scheduler debugging code updates:
- Export hidden tracepoints to modules (Gabriele Monaco)
- Convert copy_from_user() + kstrtouint() to kstrtouint_from_user()
(Fushuai Wang)
- Add assertions to QUEUE_CLASS (Peter Zijlstra)
- hrtimer: Fix tracing oddity (Thomas Gleixner)
Misc fixes and cleanups:
- Re-evaluate scheduling when migrating queued tasks out of throttled
cgroups (Zicheng Qu)
- Remove task_struct->faults_disabled_mapping (Christoph Hellwig)
- Fix math notation errors in avg_vruntime comment (Zhan Xusheng)
- sched/cpufreq: Use %pe format for PTR_ERR() printing
(zenghongling)"
* tag 'sched-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
sched: Re-evaluate scheduling when migrating queued tasks out of throttled cgroups
sched/cpufreq: Use %pe format for PTR_ERR() printing
sched/rt: Skip currently executing CPU in rto_next_cpu()
sched/clock: Avoid false sharing for sched_clock_irqtime
selftests/sched_ext: Add test for DL server total_bw consistency
selftests/sched_ext: Add test for sched_ext dl_server
sched/debug: Fix dl_server (re)start conditions
sched/debug: Add support to change sched_ext server params
sched_ext: Add a DL server for sched_ext tasks
sched/debug: Stop and start server based on if it was active
sched/debug: Fix updating of ppos on server write ops
sched/deadline: Clear the defer params
entry: Inline syscall_exit_work() and syscall_trace_enter()
entry: Add arch_ptrace_report_syscall_entry/exit()
entry: Rework syscall_exit_to_user_mode_work() for architecture reuse
entry: Remove unused syscall argument from syscall_trace_enter()
sched: remove task_struct->faults_disabled_mapping
sched: Update rq->avg_idle when a task is moved to an idle CPU
selftests/rseq: Add rseq slice histogram script
hrtimer: Fix trace oddity
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Lock debugging:
- Implement compiler-driven static analysis locking context checking,
using the upcoming Clang 22 compiler's context analysis features
(Marco Elver)
We removed Sparse context analysis support, because prior to
removal even a defconfig kernel produced 1,700+ context tracking
Sparse warnings, the overwhelming majority of which are false
positives. On an allmodconfig kernel the number of false positive
context tracking Sparse warnings grows to over 5,200... On the plus
side of the balance actual locking bugs found by Sparse context
analysis is also rather ... sparse: I found only 3 such commits in
the last 3 years. So the rate of false positives and the
maintenance overhead is rather high and there appears to be no
active policy in place to achieve a zero-warnings baseline to move
the annotations & fixers to developers who introduce new code.
Clang context analysis is more complete and more aggressive in
trying to find bugs, at least in principle. Plus it has a different
model to enabling it: it's enabled subsystem by subsystem, which
results in zero warnings on all relevant kernel builds (as far as
our testing managed to cover it). Which allowed us to enable it by
default, similar to other compiler warnings, with the expectation
that there are no warnings going forward. This enforces a
zero-warnings baseline on clang-22+ builds (Which are still limited
in distribution, admittedly)
Hopefully the Clang approach can lead to a more maintainable
zero-warnings status quo and policy, with more and more subsystems
and drivers enabling the feature. Context tracking can be enabled
for all kernel code via WARN_CONTEXT_ANALYSIS_ALL=y (default
disabled), but this will generate a lot of false positives.
( Having said that, Sparse support could still be added back,
if anyone is interested - the removal patch is still
relatively straightforward to revert at this stage. )
Rust integration updates: (Alice Ryhl, Fujita Tomonori, Boqun Feng)
- Add support for Atomic<i8/i16/bool> and replace most Rust native
AtomicBool usages with Atomic<bool>
- Clean up LockClassKey and improve its documentation
- Add missing Send and Sync trait implementation for SetOnce
- Make ARef Unpin as it is supposed to be
- Add __rust_helper to a few Rust helpers as a preparation for
helper LTO
- Inline various lock related functions to avoid additional function
calls
WW mutexes:
- Extend ww_mutex tests and other test-ww_mutex updates (John
Stultz)
Misc fixes and cleanups:
- rcu: Mark lockdep_assert_rcu_helper() __always_inline (Arnd
Bergmann)
- locking/local_lock: Include more missing headers (Peter Zijlstra)
- seqlock: fix scoped_seqlock_read kernel-doc (Randy Dunlap)
- rust: sync: Replace `kernel::c_str!` with C-Strings (Tamir
Duberstein)"
* tag 'locking-core-2026-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (90 commits)
locking/rwlock: Fix write_trylock_irqsave() with CONFIG_INLINE_WRITE_TRYLOCK
rcu: Mark lockdep_assert_rcu_helper() __always_inline
compiler-context-analysis: Remove __assume_ctx_lock from initializers
tomoyo: Use scoped init guard
crypto: Use scoped init guard
kcov: Use scoped init guard
compiler-context-analysis: Introduce scoped init guards
cleanup: Make __DEFINE_LOCK_GUARD handle commas in initializers
seqlock: fix scoped_seqlock_read kernel-doc
tools: Update context analysis macros in compiler_types.h
rust: sync: Replace `kernel::c_str!` with C-Strings
rust: sync: Inline various lock related methods
rust: helpers: Move #define __rust_helper out of atomic.c
rust: wait: Add __rust_helper to helpers
rust: time: Add __rust_helper to helpers
rust: task: Add __rust_helper to helpers
rust: sync: Add __rust_helper to helpers
rust: refcount: Add __rust_helper to helpers
rust: rcu: Add __rust_helper to helpers
rust: processor: Add __rust_helper to helpers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance event updates from Ingo Molnar:
"x86 PMU driver updates:
- Add support for the core PMU for Intel Diamond Rapids (DMR) CPUs
(Dapeng Mi)
Compared to previous iterations of the Intel PMU code, there's been
a lot of changes, which center around three main areas:
- Introduce the OFF-MODULE RESPONSE (OMR) facility to replace the
Off-Core Response (OCR) facility
- New PEBS data source encoding layout
- Support the new "RDPMC user disable" feature
- Likewise, a large series adds uncore PMU support for Intel Diamond
Rapids (DMR) CPUs (Zide Chen)
This centers around these four main areas:
- DMR may have two Integrated I/O and Memory Hub (IMH) dies,
separate from the compute tile (CBB) dies. Each CBB and each IMH
die has its own discovery domain.
- Unlike prior CPUs that retrieve the global discovery table
portal exclusively via PCI or MSR, DMR uses PCI for IMH PMON
discovery and MSR for CBB PMON discovery.
- DMR introduces several new PMON types: SCA, HAMVF, D2D_ULA, UBR,
PCIE4, CRS, CPC, ITC, OTC, CMS, and PCIE6.
- IIO free-running counters in DMR are MMIO-based, unlike SPR.
- Also add support for Add missing PMON units for Intel Panther Lake,
and support Nova Lake (NVL), which largely maps to Panther Lake.
(Zide Chen)
- KVM integration: Add support for mediated vPMUs (by Kan Liang and
Sean Christopherson, with fixes and cleanups by Peter Zijlstra,
Sandipan Das and Mingwei Zhang)
- Add Intel cstate driver to support for Wildcat Lake (WCL) CPUs,
which are a low-power variant of Panther Lake (Zide Chen)
- Add core, cstate and MSR PMU support for the Airmont NP Intel CPU
(aka MaxLinear Lightning Mountain), which maps to the existing
Airmont code (Martin Schiller)
Performance enhancements:
- Speed up kexec shutdown by avoiding unnecessary cross CPU calls
(Jan H. Schönherr)
- Fix slow perf_event_task_exit() with LBR callstacks (Namhyung Kim)
User-space stack unwinding support:
- Various cleanups and refactorings in preparation to generalize the
unwinding code for other architectures (Jens Remus)
Uprobes updates:
- Transition from kmap_atomic to kmap_local_page (Keke Ming)
- Fix incorrect lockdep condition in filter_chain() (Breno Leitao)
- Fix XOL allocation failure for 32-bit tasks (Oleg Nesterov)
Misc fixes and cleanups:
- s390: Remove kvm_types.h from Kbuild (Randy Dunlap)
- x86/intel/uncore: Convert comma to semicolon (Chen Ni)
- x86/uncore: Clean up const mismatch (Greg Kroah-Hartman)
- x86/ibs: Fix typo in dc_l2tlb_miss comment (Xiang-Bin Shi)"
* tag 'perf-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
s390: remove kvm_types.h from Kbuild
uprobes: Fix incorrect lockdep condition in filter_chain()
x86/ibs: Fix typo in dc_l2tlb_miss comment
x86/uprobes: Fix XOL allocation failure for 32-bit tasks
perf/x86/intel/uncore: Convert comma to semicolon
perf/x86/intel: Add support for rdpmc user disable feature
perf/x86: Use macros to replace magic numbers in attr_rdpmc
perf/x86/intel: Add core PMU support for Novalake
perf/x86/intel: Add support for PEBS memory auxiliary info field in NVL
perf/x86/intel: Add core PMU support for DMR
perf/x86/intel: Add support for PEBS memory auxiliary info field in DMR
perf/x86/intel: Support the 4 new OMR MSRs introduced in DMR and NVL
perf/core: Fix slow perf_event_task_exit() with LBR callstacks
perf/core: Speed up kexec shutdown by avoiding unnecessary cross CPU calls
uprobes: use kmap_local_page() for temporary page mappings
arm/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
mips/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
arm64/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
riscv/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
perf/x86/intel/uncore: Add Nova Lake support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Add '__rust_helper' annotation to the C helpers
This is needed to inline these helpers into Rust code
- Remove imports available via the prelude, treewide
This was possible thanks to a new lint in Klint that Gary has
implemented -- more Klint-related changes, including initial
upstream support, are coming
- Deduplicate pin-init flags
'kernel' crate:
- Add support for calling a function exactly once with the new
'do_once_lite!' macro (and 'OnceLite' type)
Based on this, add 'pr_*_once!' macros to print only once
- Add 'impl_flags!' macro for defining common bitflags operations:
impl_flags!(
/// Represents multiple permissions.
#[derive(Debug, Clone, Default, Copy, PartialEq, Eq)]
pub struct Permissions(u32);
/// Represents a single permission.
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub enum Permission {
/// Read permission.
Read = 1 << 0,
/// Write permission.
Write = 1 << 1,
/// Execute permission.
Execute = 1 << 2,
}
);
let mut f: Permissions = Permission::Read | Permission::Write;
assert!(f.contains(Permission::Read));
assert!(!f.contains(Permission::Execute));
f |= Permission::Execute;
assert!(f.contains(Permission::Execute));
let f2: Permissions = Permission::Write | Permission::Execute;
assert!((f ^ f2).contains(Permission::Read));
assert!(!(f ^ f2).contains(Permission::Write));
- 'bug' module: support 'CONFIG_DEBUG_BUGVERBOSE_DETAILED' in the
'warn_on!' macro in order to show the evaluated condition alongside
the file path:
------------[ cut here ]------------
WARNING: [val == 1] linux/samples/rust/rust_minimal.rs:27 at ...
Modules linked in: rust_minimal(+)
- Add safety module with 'unsafe_precondition_assert!' macro,
currently a wrapper for 'debug_assert!', intended to mark the
validation of safety preconditions where possible:
/// # Safety
///
/// The caller must ensure that `index` is less than `N`.
unsafe fn set_unchecked(&mut self, index: usize, value: T) {
unsafe_precondition_assert!(
index < N,
"set_unchecked() requires index ({index}) < N ({N})"
);
...
}
- Add instructions to 'build_assert!' documentation requesting to
always inline functions when used with function arguments
- 'ptr' module: replace 'build_assert!' with a 'const' one
- 'rbtree' module: reduce unsafe blocks on pointer derefs
- 'transmute' module: implement 'FromBytes' and 'AsBytes' for
inhabited ZSTs, and use it in Nova
- More treewide replacements of 'c_str!' with C string literals
'macros' crate:
- Rewrite most procedural macros ('module!', 'concat_idents!',
'#[export]', '#[vtable]', '#[kunit_tests]') to use the 'syn'
parsing library which we introduced last cycle, with better
diagnostics
This also allows to support '#[cfg]' properly in the '#[vtable]'
macro, to support arbitrary types in 'module!' macro (not just an
identifier) and to remove several custom parsing helpers we had
- Use 'quote!' from the recently vendored 'quote' library and remove
our custom one
The vendored one also allows us to avoid quoting '"' and '{}'
inside the template anymore and editors can now highlight it. In
addition, it improves robustness as it eliminates the need for
string quoting and escaping
- Use 'pin_init::zeroed()' to simplify KUnit code
'pin-init' crate:
- Rewrite all procedural macros ('[pin_]init!', '#[pin_data]',
'#[pinned_drop]', 'derive([Maybe]Zeroable)') to use the 'syn'
parsing library which we introduced last cycle, with better
diagnostics
- Implement 'InPlaceWrite' for '&'static mut MaybeUninit<T>'. This
enables users to use external allocation mechanisms such as
'static_cell'
- Support tuple structs in 'derive([Maybe]Zeroable)'
- Support attributes on fields in '[pin_]init!' (such as
'#[cfg(...)]')
- Add a '#[default_error(<type>)]' attribute to '[pin_]init!' to
override the default error (when no '? Error' is specified)
- Support packed structs in '[pin_]init!' with
'#[disable_initialized_field_access]'
- Remove 'try_[pin_]init!' in favor of merging their feature with
'[pin_]init!'. Update the kernel's own 'try_[pin_]init!' macros to
use the 'default_error' attribute
- Correct 'T: Sized' bounds to 'T: ?Sized' in the generated
'PinnedDrop' check by '#[pin_data]'
Documentation:
- Conclude the Rust experiment
MAINTAINERS:
- Add "RUST [RUST-ANALYZER]" entry for the rust-analyzer support.
Tamir and Jesung will take care of it. They have both been active
around it for a while. The new tree will flow through the Rust one
- Add Gary as maintainer for "RUST [PIN-INIT]"
- Update Boqun and Tamir emails to their kernel.org accounts
And a few other cleanups and improvements"
* tag 'rust-6.20-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (59 commits)
rust: safety: introduce `unsafe_precondition_assert!` macro
rust: add `impl_flags!` macro for defining common bitflag operations
rust: print: Add pr_*_once macros
rust: bug: Support DEBUG_BUGVERBOSE_DETAILED option
rust: print: Add support for calling a function exactly once
rust: kbuild: deduplicate pin-init flags
gpu: nova-core: remove imports available via prelude
rust: clk: replace `kernel::c_str!` with C-Strings
MAINTAINERS: Update my email address to @kernel.org
rust: macros: support `#[cfg]` properly in `#[vtable]` macro.
rust: kunit: use `pin_init::zeroed` instead of custom null value
rust: macros: rearrange `#[doc(hidden)]` in `module!` macro
rust: macros: allow arbitrary types to be used in `module!` macro
rust: macros: convert `#[kunit_tests]` macro to use `syn`
rust: macros: convert `concat_idents!` to use `syn`
rust: macros: convert `#[export]` to use `syn`
rust: macros: use `quote!` for `module!` macro
rust: macros: use `syn` to parse `module!` macro
rust: macros: convert `#[vtable]` macro to use `syn`
rust: macros: use `quote!` from vendored crate
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Support associating BPF program with struct_ops (Amery Hung)
- Switch BPF local storage to rqspinlock and remove recursion detection
counters which were causing false positives (Amery Hung)
- Fix live registers marking for indirect jumps (Anton Protopopov)
- Introduce execution context detection BPF helpers (Changwoo Min)
- Improve verifier precision for 32bit sign extension pattern
(Cupertino Miranda)
- Optimize BTF type lookup by sorting vmlinux BTF and doing binary
search (Donglin Peng)
- Allow states pruning for misc/invalid slots in iterator loops (Eduard
Zingerman)
- In preparation for ASAN support in BPF arenas teach libbpf to move
global BPF variables to the end of the region and enable arena kfuncs
while holding locks (Emil Tsalapatis)
- Introduce support for implicit arguments in kfuncs and migrate a
number of them to new API. This is a prerequisite for cgroup
sub-schedulers in sched-ext (Ihor Solodrai)
- Fix incorrect copied_seq calculation in sockmap (Jiayuan Chen)
- Fix ORC stack unwind from kprobe_multi (Jiri Olsa)
- Speed up fentry attach by using single ftrace direct ops in BPF
trampolines (Jiri Olsa)
- Require frozen map for calculating map hash (KP Singh)
- Fix lock entry creation in TAS fallback in rqspinlock (Kumar
Kartikeya Dwivedi)
- Allow user space to select cpu in lookup/update operations on per-cpu
array and hash maps (Leon Hwang)
- Make kfuncs return trusted pointers by default (Matt Bobrowski)
- Introduce "fsession" support where single BPF program is executed
upon entry and exit from traced kernel function (Menglong Dong)
- Allow bpf_timer and bpf_wq use in all programs types (Mykyta
Yatsenko, Andrii Nakryiko, Kumar Kartikeya Dwivedi, Alexei
Starovoitov)
- Make KF_TRUSTED_ARGS the default for all kfuncs and clean up their
definition across the tree (Puranjay Mohan)
- Allow BPF arena calls from non-sleepable context (Puranjay Mohan)
- Improve register id comparison logic in the verifier and extend
linked registers with negative offsets (Puranjay Mohan)
- In preparation for BPF-OOM introduce kfuncs to access memcg events
(Roman Gushchin)
- Use CFI compatible destructor kfunc type (Sami Tolvanen)
- Add bitwise tracking for BPF_END in the verifier (Tianci Cao)
- Add range tracking for BPF_DIV and BPF_MOD in the verifier (Yazhou
Tang)
- Make BPF selftests work with 64k page size (Yonghong Song)
* tag 'bpf-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (268 commits)
selftests/bpf: Fix outdated test on storage->smap
selftests/bpf: Choose another percpu variable in bpf for btf_dump test
selftests/bpf: Remove test_task_storage_map_stress_lookup
selftests/bpf: Update task_local_storage/task_storage_nodeadlock test
selftests/bpf: Update task_local_storage/recursion test
selftests/bpf: Update sk_storage_omem_uncharge test
bpf: Switch to bpf_selem_unlink_nofail in bpf_local_storage_{map_free, destroy}
bpf: Support lockless unlink when freeing map or local storage
bpf: Prepare for bpf_selem_unlink_nofail()
bpf: Remove unused percpu counter from bpf_local_storage_map_free
bpf: Remove cgroup local storage percpu counter
bpf: Remove task local storage percpu counter
bpf: Change local_storage->lock and b->lock to rqspinlock
bpf: Convert bpf_selem_unlink to failable
bpf: Convert bpf_selem_link_map to failable
bpf: Convert bpf_selem_unlink_map to failable
bpf: Select bpf_local_storage_map_bucket based on bpf_local_storage
selftests/xsk: fix number of Tx frags in invalid packet
selftests/xsk: properly handle batch ending in the middle of a packet
bpf: Prevent reentrance into call_rcu_tasks_trace()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keys update from David Howells:
"This adds support for ML-DSA signatures in X.509 certificates and
PKCS#7/CMS messages, thereby allowing this algorithm to be used for
signing modules, kexec'able binaries, wifi regulatory data, etc..
This requires OpenSSL-3.5 at a minimum and preferably OpenSSL-4 (so
that it can avoid the use of CMS signedAttrs - but that version is not
cut yet). certs/Kconfig does a check to hide the signing options if
OpenSSL does not list the algorithm as being available"
* tag 'keys-next-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
pkcs7: Change a pr_warn() to pr_warn_once()
pkcs7: Allow authenticatedAttributes for ML-DSA
modsign: Enable ML-DSA module signing
pkcs7, x509: Add ML-DSA support
pkcs7: Allow the signing algo to do whatever digestion it wants itself
pkcs7, x509: Rename ->digest to ->m
x509: Separately calculate sha256 for blacklist
crypto: Add ML-DSA crypto_sig support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kmalloc_obj updates from Kees Cook:
"Introduce the kmalloc_obj* family of APIs for switching to type-based
kmalloc allocations, away from purely size-based allocations.
Discussed on lkml, with you, and at Linux Plumbers. It's been in -next
for the entire dev cycle.
Before the merge window closes, I'd like to send the treewide
change (generated from the Coccinelle script included here), which
mechanically converts almost 20k callsites from kmalloc* to
kmalloc_obj*:
8007 files changed, 19980 insertions(+), 20838 deletions(-)
This change needed fixes for mismatched types (since now the return
type from allocations is a pointer to the requested type, not "void
*"), and I've been fixing these over the last 4 releases.
These fixes have mostly been trivial mismatches with const qualifiers
or accidentally identical sizes (e.g. same object size: "struct kvec"
vs "struct iovec", or differing pointers to pointers), but I did catch
one case of too-small allocation.
Summary:
- Introduce kmalloc_obj*() family of type-based allocator APIs
- checkpatch: Suggest kmalloc_obj family for sizeof allocations
- coccinelle: Add kmalloc_objs conversion script"
* tag 'kmalloc_obj-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
coccinelle: Add kmalloc_objs conversion script
slab: Introduce kmalloc_flex() and family
compiler_types: Introduce __flex_counter() and family
checkpatch: Suggest kmalloc_obj family for sizeof allocations
slab: Introduce kmalloc_obj() and family
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Fix race condition in hwrng core by using RCU
Algorithms:
- Allow authenc(sha224,rfc3686) in fips mode
- Add test vectors for authenc(hmac(sha384),cbc(aes))
- Add test vectors for authenc(hmac(sha224),cbc(aes))
- Add test vectors for authenc(hmac(md5),cbc(des3_ede))
- Add lz4 support in hisi_zip
- Only allow clear key use during self-test in s390/{phmac,paes}
Drivers:
- Set rng quality to 900 in airoha
- Add gcm(aes) support for AMD/Xilinx Versal device
- Allow tfms to share device in hisilicon/trng"
* tag 'v7.0-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (100 commits)
crypto: img-hash - Use unregister_ahashes in img_{un}register_algs
crypto: testmgr - Add test vectors for authenc(hmac(md5),cbc(des3_ede))
crypto: cesa - Simplify return statement in mv_cesa_dequeue_req_locked
crypto: testmgr - Add test vectors for authenc(hmac(sha224),cbc(aes))
crypto: testmgr - Add test vectors for authenc(hmac(sha384),cbc(aes))
hwrng: core - use RCU and work_struct to fix race condition
crypto: starfive - Fix memory leak in starfive_aes_aead_do_one_req()
crypto: xilinx - Fix inconsistant indentation
crypto: rng - Use unregister_rngs in register_rngs
crypto: atmel - Use unregister_{aeads,ahashes,skciphers}
hwrng: optee - simplify OP-TEE context match
crypto: ccp - Add sysfs attribute for boot integrity
dt-bindings: crypto: atmel,at91sam9g46-sha: add microchip,lan9691-sha
dt-bindings: crypto: atmel,at91sam9g46-aes: add microchip,lan9691-aes
dt-bindings: crypto: qcom,inline-crypto-engine: document the Milos ICE
crypto: caam - fix netdev memory leak in dpaa2_caam_probe
crypto: hisilicon/qm - increase wait time for mailbox
crypto: hisilicon/qm - obtain the mailbox configuration at one time
crypto: hisilicon/qm - remove unnecessary code in qm_mb_write()
crypto: hisilicon/qm - move the barrier before writing to the mailbox register
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
- Add support for verifying ML-DSA signatures.
ML-DSA (Module-Lattice-Based Digital Signature Algorithm) is a
recently-standardized post-quantum (quantum-resistant) signature
algorithm. It was known as Dilithium pre-standardization.
The first use case in the kernel will be module signing. But there
are also other users of RSA and ECDSA signatures in the kernel that
might want to upgrade to ML-DSA eventually.
- Improve the AES library:
- Make the AES key expansion and single block encryption and
decryption functions use the architecture-optimized AES code.
Enable these optimizations by default.
- Support preparing an AES key for encryption-only, using about
half as much memory as a bidirectional key.
- Replace the existing two generic implementations of AES with a
single one.
- Simplify how Adiantum message hashing is implemented. Remove the
"nhpoly1305" crypto_shash in favor of direct lib/crypto/ support for
NH hashing, and enable optimizations by default.
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (53 commits)
lib/crypto: mldsa: Clarify the documentation for mldsa_verify() slightly
lib/crypto: aes: Drop 'volatile' from aes_sbox and aes_inv_sbox
lib/crypto: aes: Remove old AES en/decryption functions
lib/crypto: aesgcm: Use new AES library API
lib/crypto: aescfb: Use new AES library API
crypto: omap - Use new AES library API
crypto: inside-secure - Use new AES library API
crypto: drbg - Use new AES library API
crypto: crypto4xx - Use new AES library API
crypto: chelsio - Use new AES library API
crypto: ccp - Use new AES library API
crypto: x86/aes-gcm - Use new AES library API
crypto: arm64/ghash - Use new AES library API
crypto: arm/ghash - Use new AES library API
staging: rtl8723bs: core: Use new AES library API
net: phy: mscc: macsec: Use new AES library API
chelsio: Use new AES library API
Bluetooth: SMP: Use new AES library API
crypto: x86/aes - Remove the superseded AES-NI crypto_cipher
lib/crypto: x86/aes: Add AES-NI optimization
...
|
|
Reference the common PHY properties so RX and TX SerDes lane polarity
of the SGMII/1000Base-X/2500Base-X port can be configured.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/f556ef8be75e37a2f864b9d905a78962bbe76d18.1769916962.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pull documentation updates from Jonathan Corbet:
"A slightly calmer cycle for docs this time around, though there is
still a fair amount going on, including:
- Some signs of life on the long-moribund Japanese translation
- Documentation on policies around the use of generative tools for
patch submissions, and a separate document intended for consumption
by generative tools
- The completion of the move of the documentation tools to
tools/docs. For now we're leaving a /scripts/kernel-doc symlink
behind to avoid breaking scripts
- Ongoing build-system work includes the incorporation of
documentation in Python code, better support for documenting
variables, and lots of improvements and fixes
- Automatic linking of man-page references -- cat(1), for example --
to the online pages in the HTML build
...and the usual array of typo fixes and such"
* tag 'docs-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (107 commits)
doc: development-process: add notice on testing
tools: sphinx-build-wrapper: improve its help message
docs: sphinx-build-wrapper: allow -v override -q
docs: kdoc: Fix pdfdocs build for tools
docs: ja_JP: process: translate 'Obtain a current source tree'
docs: fix 're-use' -> 'reuse' in documentation
docs: ioctl-number: fix a typo in ioctl-number.rst
docs: filesystems: ensure proc pid substitutable is complete
docs: automarkup.py: Skip common English words as C identifiers
Documentation: use a source-read extension for the index link boilerplate
docs: parse_features: make documentation more consistent
docs: add parse_features module documentation
docs: jobserver: do some documentation improvements
docs: add jobserver module documentation
docs: kabi: helpers: add documentation for each "enum" value
docs: kabi: helpers: add helper for debug bits 7 and 8
docs: kabi: system_symbols: end docstring phrases with a dot
docs: python: abi_regex: do some improvements at documentation
docs: python: abi_parser: do some improvements at documentation
docs: add kabi modules documentation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- fix running as Xen PVH guest in 32-bit mode without PAE
- fix PV device handling for suspend/resume when running as
a Xen guest
- clean up workqueue usage
- fix the Xen balloon driver for PVH dom0
- introduce the possibility to use hypercalls for console
messages in unprivileged guests
- enable Xen dom0 use of virtio devices in nested virtualization
setups
- simplify the xen-mcelog driver
* tag 'for-linus-7.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xenbus: Rename helpers to freeze/thaw/restore
xenbus: Use .freeze/.thaw to handle xenbus devices
xen/mcelog: simplify MCE_GETCLEAR_FLAGS using xchg()
xen/balloon: improve accuracy of initial balloon target for dom0
Partial revert "x86/xen: fix balloon target initialization for PVH dom0"
xen: introduce xen_console_io option
xen/virtio: Don't use grant-dma-ops when running as Dom0
x86/xen/pvh: Enable PAE mode for 32-bit guest only when CONFIG_X86_PAE is set
xen: privcmd: WQ_PERCPU added to alloc_workqueue users
xen/events: replace use of system_wq with system_percpu_wq
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's a little less than normal, probably due to LPC & Christmas/New
Year meaning that a few series weren't quite ready or reviewed in
time. It's still useful across the board, despite the only real
feature being support for the LS64 feature enabling 64-byte atomic
accesses to endpoints that support it.
ACPI:
- Add interrupt signalling support to the AGDI handler
- Add Catalin and myself to the arm64 ACPI MAINTAINERS entry
CPU features:
- Drop Kconfig options for PAN and LSE (these are detected at runtime)
- Add support for 64-byte single-copy atomic instructions (LS64/LS64V)
- Reduce MTE overhead when executing in the kernel on Ampere CPUs
- Ensure POR_EL0 value exposed via ptrace is up-to-date
- Fix error handling on GCS allocation failure
CPU frequency:
- Add CPU hotplug support to the FIE setup in the AMU driver
Entry code:
- Minor optimisations and cleanups to the syscall entry path
- Preparatory rework for moving to the generic syscall entry code
Hardware errata:
- Work around Spectre-BHB on TSV110 processors
- Work around broken CMO propagation on some systems with the SI-L1
interconnect
Miscellaneous:
- Disable branch profiling for arch/arm64/ to avoid issues with
noinstr
- Minor fixes and cleanups (kexec + ubsan, WARN_ONCE() instead of
WARN_ON(), reduction of boolean expression)
- Fix custom __READ_ONCE() implementation for LTO builds when
operating on non-atomic types
Perf and PMUs:
- Support for CMN-600AE
- Be stricter about supported hardware in the CMN driver
- Support for DSU-110 and DSU-120
- Support for the cycles event in the DSU driver (alongside the
dedicated cycles counter)
- Use IRQF_NO_THREAD instead of IRQF_ONESHOT in the cxlpmu driver
- Use !bitmap_empty() as a faster alternative to bitmap_weight()
- Fix SPE error handling when failing to resume profiling
Selftests:
- Add support for the FORCE_TARGETS option to the arm64 kselftests
- Avoid nolibc-specific my_syscall() function
- Add basic test for the LS64 HWCAP
- Extend fp-pidbench to cover additional workload patterns"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (43 commits)
perf/arm-cmn: Reject unsupported hardware configurations
perf: arm_spe: Properly set hw.state on failures
arm64/gcs: Fix error handling in arch_set_shadow_stack_status()
arm64: Fix non-atomic __READ_ONCE() with CONFIG_LTO=y
arm64: poe: fix stale POR_EL0 values for ptrace
kselftest/arm64: Raise default number of loops in fp-pidbench
kselftest/arm64: Add a no-SVE loop after SVE in fp-pidbench
perf/cxlpmu: Replace IRQF_ONESHOT with IRQF_NO_THREAD
arm64: mte: Set TCMA1 whenever MTE is present in the kernel
arm64/ptrace: Return early for ptrace_report_syscall_entry() error
arm64/ptrace: Split report_syscall()
arm64: Remove unused _TIF_WORK_MASK
kselftest/arm64: Add missing file in .gitignore
arm64: errata: Workaround for SI L1 downstream coherency issue
kselftest/arm64: Add HWCAP test for FEAT_LS64
arm64: Add support for FEAT_{LS64, LS64_V}
KVM: arm64: Enable FEAT_{LS64, LS64_V} in the supported guest
arm64: Provide basic EL2 setup for FEAT_{LS64, LS64_V} usage at EL0/1
KVM: arm64: Handle DABT caused by LS64* instructions on unsupported memory
KVM: arm64: Add documentation for KVM_EXIT_ARM_LDST64B
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Drop support for outdated 3590/3592 and 3480 tape devices, and limit
support to virtualized 3490E types devices
- Implement exception based WARN() and WARN_ONCE() similar to x86
- Slightly optimize preempt primitives like __preempt_count_add() and
__preempt_count_dec_and_test()
- A couple of small fixes and improvements
* tag 's390-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (35 commits)
s390/tape: Consolidate tape config options and modules
s390/cio: Fix device lifecycle handling in css_alloc_subchannel()
s390/tape: Rename tape_34xx.c to tape_3490.c
s390/tape: Cleanup sense data analysis and error handling
s390/tape: Remove 3480 tape device type
s390/tape: Remove unused command definitions
s390/tape: Remove special block id handling
s390/tape: Remove tape load display support
s390/tape: Remove support for 3590/3592 models
s390/kexec: Emit an error message when cmdline is too long
s390/configs: Enable BLK_DEV_NULL_BLK as module
s390: Document s390 stackprotector support
s390/perf: Disable register readout on sampling events
s390/Kconfig: Define non-zero ILLEGAL_POINTER_VALUE
s390/bug: Prevent tail-call optimization
s390/bug: Skip __WARN_trap() in call traces
s390/bug: Implement WARN_ONCE()
s390/bug: Implement __WARN_printf()
s390/traps: Copy monitor code to pt_regs
s390/bug: Introduce and use monitor code macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull kthread updates from Frederic Weisbecker:
"The kthread code provides an infrastructure which manages the
preferred affinity of unbound kthreads (node or custom cpumask)
against housekeeping (CPU isolation) constraints and CPU hotplug
events.
One crucial missing piece is the handling of cpuset: when an isolated
partition is created, deleted, or its CPUs updated, all the unbound
kthreads in the top cpuset become indifferently affine to _all_ the
non-isolated CPUs, possibly breaking their preferred affinity along
the way.
Solve this with performing the kthreads affinity update from cpuset to
the kthreads consolidated relevant code instead so that preferred
affinities are honoured and applied against the updated cpuset
isolated partitions.
The dispatch of the new isolated cpumasks to timers, workqueues and
kthreads is performed by housekeeping, as per the nice Tejun's
suggestion.
As a welcome side effect, HK_TYPE_DOMAIN then integrates both the set
from boot defined domain isolation (through isolcpus=) and cpuset
isolated partitions. Housekeeping cpumasks are now modifiable with a
specific RCU based synchronization. A big step toward making
nohz_full= also mutable through cpuset in the future"
* tag 'kthread-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks: (33 commits)
doc: Add housekeeping documentation
kthread: Document kthread_affine_preferred()
kthread: Comment on the purpose and placement of kthread_affine_node() call
kthread: Honour kthreads preferred affinity after cpuset changes
sched/arm64: Move fallback task cpumask to HK_TYPE_DOMAIN
sched: Switch the fallback task allowed cpumask to HK_TYPE_DOMAIN
kthread: Rely on HK_TYPE_DOMAIN for preferred affinity management
kthread: Include kthreadd to the managed affinity list
kthread: Include unbound kthreads in the managed affinity list
kthread: Refine naming of affinity related fields
PCI: Remove superfluous HK_TYPE_WQ check
sched/isolation: Remove HK_TYPE_TICK test from cpu_is_isolated()
cpuset: Remove cpuset_cpu_is_isolated()
timers/migration: Remove superfluous cpuset isolation test
cpuset: Propagate cpuset isolation update to timers through housekeeping
cpuset: Propagate cpuset isolation update to workqueue through housekeeping
PCI: Flush PCI probe workqueue on cpuset isolated partition change
sched/isolation: Flush vmstat workqueues on cpuset isolated partition change
sched/isolation: Flush memcg workqueues on cpuset isolated partition change
cpuset: Update HK_TYPE_DOMAIN cpumask from cpuset
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add support for "slow" (long-term trend) workload type hints to
the Intel int340x thermal driver and selftests (and enable it for
Panther Lake), add support for MT8196 along with DT bindings and for
MT7987 to the Mediatek LVTS thermal driver, add support for RZ/T2H and
RZ/N2H along with DT bindings to the Renesas rzg3e thermal driver, add
support for the Panther Lake, Wildcat Lake and Nova Lake processors to
the intel_tcc_cooling driver, fix bugs, make some cosmetic changes
including code cleanups and library function substitutions, and update
documentation.
Specifics:
- Add Panther Lake, Wildcat Lake and Nova Lake processor IDs to the
list of supported processors in the intel_tcc_cooling thermal
driver (Srinivas Pandruvada)
- Drop unnecessary explicit driver data clearing on removal from the
intel_pch_thermal driver (Kaushlendra Kumar)
- Add support for "slow" workload type hints to the int340x
processor_thermal driver and enable it on the Panther Lake platform
(Srinivas Pandruvada)
- Use sysfs_emit{_at}() in sysfs show functions in Intel thermal
drivers (Thorsten Blum)
- Update the x86_pkg_temp_thermal driver to handle
THERMAL_TEMP_INVALID that can be passed to it via sysfs as expected
(Rafael Wysocki)
- Drop a redundant local variable from the intel_tcc_cooling thermal
driver and fix a kerneldoc comment typo in the TCC library (Sumeet
Pawnikar)
- Fix CFLAGS and LDFLAGS in the pkg-config libthermal template
(Romain Gantois)
- Support multiple temp to raw conversion functions in the Mediatek
LVTS thermal driver and add MT8196 and MT6991 support to it (Laura
Nao)
- Add Mediatek LVTS driver support for MT7987 (Frank Wunderlich)
- Use the existing HZ_PER_MHZ macro on STM32 (Andy Shevchenko)
- Use the existing clamp() macro on BCM2835 (Thorsten Blum)
- Make the reset line optional in order to support new Renesas SoCs
where it is not available and add support for RZ/T2H and RZ/N2H to
the rzg3e thermal driver (Cosmin Tanislav)
- Document RZ/V2N TSU in the r9a09g047-tsu DT bindings (Ovidiu
Panait)
- Fix all kernel-doc warnings in the internal thermal core header
file (Randy Dunlap)
- Fix a device node reference leak in thermal_of_cm_lookup() (Felix
Gu)
- Replace some old-style library function calls with ones that are
currently recommended in several places in the thermal core and
debugfs code (Sumeet Pawnikar, Thorsten Blum)
* tag 'thermal-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits)
drivers: thermal: intel: tcc_cooling: Drop redundant local variable
thermal/of: Fix reference leak in thermal_of_cm_lookup()
thermal: core: thermal_core.h: fix all kernel-doc warnings
thermal: intel: x86_pkg_temp_thermal: Handle invalid temperature
thermal: renesas: rzg3e: add support for RZ/T2H and RZ/N2H
dt-bindings: thermal: r9a09g047-tsu: document RZ/T2H and RZ/N2H
thermal: renesas: rzg3e: make calibration value retrieval per-chip
thermal: renesas: rzg3e: make min and max temperature per-chip
thermal: renesas: rzg3e: make reset optional
dt-bindings: thermal: r9a09g047-tsu: Document RZ/V2N TSU
thermal/drivers/broadcom: Use clamp to simplify bcm2835_thermal_temp2adc
thermal/drivers/stm32: Use predefined HZ_PER_MHZ instead of a custom one
thermal/drivers/mediatek/lvts_thermal: Add mt7987 support
dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT7987
dt-bindings: nvmem: mediatek: efuse: Add support for MT8196
thermal/drivers/mediatek/lvts_thermal: Add MT8196 support
thermal/drivers/mediatek/lvts: Support MSR offset for 16-bit calibration data
thermal/drivers/mediatek/lvts: Add support for ATP mode
thermal/drivers/mediatek/lvts: Add lvts_temp_to_raw variant
thermal/drivers/mediatek/lvts: Add platform ops to support alternative conversion logic
...
|
|
Add the fsl,aips and fsl,emi compatible strings for legacy i.MX3 SoCs
(over 15 years old).
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260201011913.2419626-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Drop the gpio reset from the list of required properties. The bridge works
fine with a reset not managed by Linux. In the driver itself the gpio is
already flagged as optional.
Signed-off-by: Dominik Haller <d.haller@phytec.de>
Link: https://patch.msgid.link/20260130205820.83189-6-d.haller@phytec.de
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"By the number of commits, cpufreq is the leading party (again) and the
most visible change there is the removal of the omap-cpufreq driver
that has not been used for a long time (good riddance). There are also
quite a few changes in the cppc_cpufreq driver, mostly related to
fixing its frequency invariance engine in the case when the CPPC
registers used by it are not in PCC. In addition to that, support for
AM62L3 is added to the ti-cpufreq driver and the cpufreq-dt-platdev
list is updated for some platforms. The remaining cpufreq changes are
assorted fixes and cleanups.
Next up is cpuidle and the changes there are dominated by intel_idle
driver updates, mostly related to the new command line facility
allowing users to adjust the list of C-states used by the driver.
There are also a few updates of cpuidle governors, including two menu
governor fixes and some refinements of the teo governor, and a
MAINTAINERS update adding Christian Loehle as a cpuidle reviewer.
[Thanks for stepping up Christian!]
The most significant update related to system suspend and hibernation
is the one to stop freezing the PM runtime workqueue during system PM
transitions which allows some deadlocks to be avoided. There is also a
fix for possible concurrent bit field updates in the core device
suspend code and a few other minor fixes.
Apart from the above, several drivers are updated to discard the
return value of pm_runtime_put() which is going to be converted to a
void function as soon as everybody stops using its return value, PL4
support for Ice Lake is added to the Intel RAPL power capping driver,
and there are assorted cleanups, documentation fixes, and some
cpupower utility improvements.
Specifics:
- Remove the unused omap-cpufreq driver (Andreas Kemnade)
- Optimize error handling code in cpufreq_boost_trigger_state() and
make cpufreq_boost_trigger_state() return -EOPNOTSUPP if no policy
supports boost (Lifeng Zheng)
- Update cpufreq-dt-platdev list for tegra, qcom, TI (Aaron Kling,
Dhruva Gole, and Konrad Dybcio)
- Minor improvements to the cpufreq and cpumask rust implementation
(Alexandre Courbot, Alice Ryhl, Tamir Duberstein, and Yilin Chen)
- Add support for AM62L3 SoC to the ti-cpufreq driver (Dhruva Gole)
- Update arch_freq_scale in the CPPC cpufreq driver's frequency
invariance engine (FIE) in scheduler ticks if the related CPPC
registers are not in PCC (Jie Zhan)
- Assorted minor cleanups and improvements in ARM cpufreq drivers
(Juan Martinez, Felix Gu, Luca Weiss, and Sergey Shtylyov)
- Add generic helpers for sysfs show/store to cppc_cpufreq (Sumit
Gupta)
- Make the scaling_setspeed cpufreq sysfs attribute return the actual
requested frequency to avoid confusion (Pengjie Zhang)
- Simplify the idle CPU time granularity test in the ondemand cpufreq
governor (Frederic Weisbecker)
- Enable asym capacity in intel_pstate only when CPU SMT is not
possible (Yaxiong Tian)
- Update the description of rate_limit_us default value in cpufreq
documentation (Yaxiong Tian)
- Add a command line option to adjust the C-states table in the
intel_idle driver, remove the 'preferred_cstates' module parameter
from it, add C-states validation to it and clean it up (Artem
Bityutskiy)
- Make the menu cpuidle governor always check the time till the
closest timer event when the scheduler tick has been stopped to
prevent it from mistakenly selecting the deepest available idle
state (Rafael Wysocki)
- Update the teo cpuidle governor to avoid making suboptimal
decisions in certain corner cases and generally improve idle state
selection accuracy (Rafael Wysocki)
- Remove an unlikely() annotation on the early-return condition in
menu_select() that leads to branch misprediction 100% of the time
on systems with only 1 idle state enabled, like ARM64 servers
(Breno Leitao)
- Add Christian Loehle to MAINTAINERS as a cpuidle reviewer
(Christian Loehle)
- Stop flagging the PM runtime workqueue as freezable to avoid system
suspend and resume deadlocks in subsystems that assume asynchronous
runtime PM to work during system-wide PM transitions (Rafael
Wysocki)
- Drop redundant NULL pointer checks before acomp_request_free() from
the hibernation code handling image saving (Rafael Wysocki)
- Update wakeup_sources_walk_start() to handle empty lists of wakeup
sources as appropriate (Samuel Wu)
- Make dev_pm_clear_wake_irq() check the power.wakeirq value under
power.lock to avoid race conditions (Gui-Dong Han)
- Avoid bit field races related to power.work_in_progress in the core
device suspend code (Xuewen Yan)
- Make several drivers discard pm_runtime_put() return value in
preparation for converting that function to a void one (Rafael
Wysocki)
- Add PL4 support for Ice Lake to the Intel RAPL power capping driver
(Daniel Tang)
- Replace sprintf() with sysfs_emit() in power capping sysfs show
functions (Sumeet Pawnikar)
- Make dev_pm_opp_get_level() return value match the documentation
after a previous update of the latter (Aleks Todorov)
- Use scoped for each OF child loop in the OPP code (Krzysztof
Kozlowski)
- Fix a bug in an example code snippet and correct typos in the
energy model management documentation (Patrick Little)
- Fix miscellaneous problems in cpupower (Kaushlendra Kumar):
* idle_monitor: Fix incorrect value logged after stop
* Fix inverted APERF capability check
* Use strcspn() to strip trailing newline
* Reset errno before strtoull()
* Show C0 in idle-info dump
- Improve cpupower installation procedure by making the systemd step
optional and allowing users to disable the installation of
systemd's unit file (João Marcos Costa)"
* tag 'pm-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
PM: sleep: core: Avoid bit field races related to work_in_progress
PM: sleep: wakeirq: harden dev_pm_clear_wake_irq() against races
cpufreq: Documentation: Update description of rate_limit_us default value
cpufreq: intel_pstate: Enable asym capacity only when CPU SMT is not possible
PM: wakeup: Handle empty list in wakeup_sources_walk_start()
PM: EM: Documentation: Fix bug in example code snippet
Documentation: Fix typos in energy model documentation
cpuidle: governors: teo: Refine intercepts-based idle state lookup
cpuidle: governors: teo: Adjust the classification of wakeup events
cpufreq: ondemand: Simplify idle cputime granularity test
cpufreq: userspace: make scaling_setspeed return the actual requested frequency
PM: hibernate: Drop NULL pointer checks before acomp_request_free()
cpufreq: CPPC: Add generic helpers for sysfs show/store
cpufreq: scmi: Fix device_node reference leak in scmi_cpu_domain_id()
cpufreq: ti-cpufreq: add support for AM62L3 SoC
cpufreq: dt-platdev: Add ti,am62l3 to blocklist
cpufreq/amd-pstate: Add comment explaining nominal_perf usage for performance policy
cpufreq: scmi: correct SCMI explanation
cpufreq: dt-platdev: Block the driver from probing on more QC platforms
rust: cpumask: rename methods of Cpumask for clarity and consistency
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"This one is significantly larger than previous ACPI support pull
requests because several significant updates have coincided in it.
First, there is a routine ACPICA code update, to upstream version
20251212, but this time it covers new ACPI 6.6 material that has not
been covered yet. Among other things, it includes definitions of a few
new ACPI tables and updates of some others, like the GICv5 MADT
structures and ARM IORT IWB node definitions that are used for adding
GICv5 ACPI probing on ARM (that technically is IRQ subsystem material,
but it depends on the ACPICA changes, so it is included here). The
latter alone adds a few hundred lines of new code.
Second, there is an update of ACPI _OSC handling including a fix that
prevents failures from occurring in some corner cases due to careless
handling of _OSC error bits.
On top of that, the "system resource" ACPI device objects with the
PNP0C01 and PNP0C02 are now going to be handled by the ACPI core
device enumeration code instead of handing them over to the legacy PNP
system driver which causes device enumeration issues to occur. Some of
those issues have been worked around in device drivers and elsewhere
and those workarounds should not be necessary any more, so they are
going away.
Moreover, the time has come to convert all "core ACPI" device drivers
that were still using struct acpi_driver objects for device binding
into proper platform drivers that use struct platform_driver for this
purpose. These updates are accompanied by some requisite core ACPI
device enumeration code changes.
Next, there are ACPI APEI updates, including changes to avoid excess
overhead in the NMI handler and in SEA on the ARM side, changes to
unify ACPI-based HW error tracing and logging, and changes to prevent
APEI code from reaching out of its allocated memory.
There are also some ACPI power management updates, mostly related to
the ACPI cpuidle support in the processor driver, suspend-to-idle
handling on systems with ACPI support and to ACPI PM of devices.
In addition to the above, bugs are fixed and the code is cleaned up in
assorted places all over.
Specifics:
- Update the ACPICA code in the kernel to upstream version 20251212
which includes the following changes:
* Add support for new ACPI table DTPR (Michal Camacho Romero)
* Release objects with acpi_ut_delete_object_desc() (Zilin Guan)
* Add UUIDs for Microsoft fan extensions and UUIDs associated with
TPM 2.0 devices (Armin Wolf)
* Fix NULL pointer dereference in acpi_ev_address_space_dispatch()
(Alexey Simakov)
* Add KEYP ACPI table definition (Dave Jiang)
* Add support for the Microsoft display mux _OSI string (Armin
Wolf)
* Add definitions for the IOVT ACPI table (Xianglai Li)
* Abort AML bytecode execution on AML_FATAL_OP (Armin Wolf)
* Include all fields in subtable type1 for PPTT (Ben Horgan)
* Add GICv5 MADT structures and Arm IORT IWB node definitions
(Jose Marinho)
* Update Parameter Block structure for RAS2 and add a new flag in
Memory Affinity Structure for SRAT (Pawel Chmielewski)
* Add _VDM (Voltage Domain) object (Pawel Chmielewski)
- Add support for GICv5 ACPI probing on ARM which is based on the
GICv5 MADT structures and ARM IORT IWB node definitions recently
added to ACPICA (Lorenzo Pieralisi)
- Rework ACPI PM notification setup for PCI root buses and modify the
ACPI PM setup for devices to register wakeup source objects under
physical (that is, PCI, platform, etc.) devices instead of doing
that under their ACPI companions (Rafael Wysocki)
- Adjust debug messages regarding postponed ACPI PM printed during
system resume to be more accurate (Rafael Wysocki)
- Remove dead code from lps0_device_attach() (Gergo Koteles)
- Start to invoke Microsoft Function 9 (Turn On Display) of the Low-
Power S0 Idle (LPS0) _DSM in the suspend-to-idle resume flow on
systems with ACPI LPS0 support to address a functional issue on
Lenovo Yoga Slim 7i Aura (15ILL9), where system fans and keyboard
backlights fail to resume after suspend (Jakob Riemenschneider)
- Add sysfs attribute cid for exposing _CID lists under ACPI device
objects (Rafael Wysocki)
- Replace sprintf() with sysfs_emit() in all of the core ACPI sysfs
interface code (Sumeet Pawnikar)
- Use acpi_get_local_u64_address() in the code implementing ACPI
support for PCI to evaluate _ADR instead of evaluating that object
directly (Andy Shevchenko)
- Add JWIPC JVC9100 to irq1_level_low_skip_override[] to unbreak
serial IRQs on that system (Ai Chao)
- Fix handling of _OSC errors in acpi_run_osc() to avoid failures on
systems where _OSC error bits are set even though the _OSC return
buffer contains acknowledged feature bits (Rafael Wysocki)
- Clean up and rearrange \_SB._OSC handling for general platform
features and USB4 features to avoid code duplication and
unnecessary memory management overhead (Rafael Wysocki)
- Make the ACPI core device enumeration code handle PNP0C01 and
PNP0C02 ("system resource") device objects directly instead of
letting the legacy PNP system driver handle them to avoid device
enumeration issues on systems where PNP0C02 is present in the _CID
list under ACPI device objects with a _HID matching a proper device
driver in Linux (Rafael Wysocki)
- Drop workarounds for the known device enumeration issues related to
_CID lists containing PNP0C02 (Rafael Wysocki)
- Drop outdated comment regarding removed function in the ACPI-based
device enumeration code (Julia Lawall)
- Make PRP0001 device matching work as expected for ACPI device
objects using it as a _HID for board development and similar
purposes (Kartik Rajput)
- Use async schedule function in acpi_scan_clear_dep_fn() to avoid
races with user space initialization on some systems (Yicong Yang)
- Add a piece of documentation explaining why binding drivers
directly to ACPI device objects is not a good idea in general and
why it is desirable to convert drivers doing so into proper
platform drivers that use struct platform_driver for device binding
(Rafael Wysocki)
- Convert multiple "core ACPI" drivers, including the NFIT ACPI
device driver, the generic ACPI button drivers, the generic ACPI
thermal zone driver, the ACPI hardware event device (HED) driver,
the ACPI EC driver, the ACPI SMBUS HC driver, the ACPI Smart
Battery Subsystem (SBS) driver, and the ACPI backlight (video)
driver to proper platform drivers that use struct platform_driver
for device binding (Rafael Wysocki)
- Use acpi_get_local_u64_address() in the ACPI backlight (video)
driver to evaluate _ADR instead of evaluating that object directly
(Andy Shevchenko)
- Convert the generic ACPI battery driver to a proper platform driver
using struct platform_driver for device binding (Rafael Wysocki)
- Fix incorrect charging status when current is zero in the generic
ACPI battery driver (Ata İlhan Köktürk)
- Use LIST_HEAD() for initializing a stack-allocated list in the
generic ACPI watchdog device driver (Can Peng)
- Rework the ACPI idle driver initialization to register it directly
from the common initialization code instead of doing that from a
CPU hotplug "online" callback and clean it up (Huisong Li, Rafael
Wysocki)
- Fix a possible NULL pointer dereference in
acpi_processor_errata_piix4() (Tuo Li)
- Make read-only array non_mmio_desc[] static const (Colin Ian King)
- Prevent the APEI GHES support code on ARM from accessing memory out
of bounds or going past the ARM processor CPER record buffer (Mauro
Carvalho Chehab)
- Prevent cper_print_fw_err() from dumping the entire memory on
systems with defective firmware (Mauro Carvalho Chehab)
- Improve ghes_notify_nmi() status check to avoid unnecessary
overhead in the NMI handler by carrying out all of the requisite
preparations and the NMI registration time (Tony Luck)
- Refactor the GHES driver by extracting common functionality into
reusable helper functions to reduce code duplication and improve
the ghes_notify_sea() status check in analogy with the previous
ghes_notify_nmi() status check improvement (Shuai Xue)
- Make ELOG and GHES log and trace consistently and support the CPER
CXL protocol analogously (Fabio De Francesco)
- Disable KASAN instrumentation in the APEI GHES driver when compile
testing with clang < 18 (Nathan Chancellor)
- Let ghes_edac be the preferred driver to load on __ZX__ and _BYO_
systems by extending the platform detection list in the APEI GHES
driver (Tony W Wang-oc)
- Clean up cppc_perf_caps and cppc_perf_ctrls structs and rename EPP
constants for clarity in the ACPI CPPC library (Sumit Gupta)"
* tag 'acpi-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (117 commits)
ACPI: battery: fix incorrect charging status when current is zero
ACPI: scan: Use async schedule function in acpi_scan_clear_dep_fn()
ACPI: x86: s2idle: Invoke Microsoft _DSM Function 9 (Turn On Display)
ACPI: APEI: GHES: Add ghes_edac support for __ZX__ and _BYO_ systems
ACPI: APEI: GHES: Disable KASAN instrumentation when compile testing with clang < 18
ACPI: sysfs: Replace sprintf() with sysfs_emit()
ACPI: CPPC: Rename EPP constants for clarity
ACPI: CPPC: Clean up cppc_perf_caps and cppc_perf_ctrls structs
ACPI: processor: idle: Rework the handling of acpi_processor_ffh_lpi_probe()
ACPI: processor: idle: Convert acpi_processor_setup_cpuidle_dev() to void
ACPI: processor: idle: Convert acpi_processor_setup_cpuidle_states() to void
irqchip/gic-v5: Add ACPI IWB probing
irqchip/gic-v5: Add ACPI ITS probing
irqchip/gic-v5: Add ACPI IRS probing
irqchip/gic-v5: Split IRS probing into OF and generic portions
PCI/MSI: Make the pci_msi_map_rid_ctlr_node() interface firmware agnostic
irqdomain: Add parent field to struct irqchip_fwid
ACPI: PCI: simplify code with acpi_get_local_u64_address()
ACPI: video: simplify code with acpi_get_local_u64_address()
ACPI: PM: Adjust messages regarding postponed ACPI PM
...
|
