| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.19:
- A bunch of dt-schema warning cleanup patches from Frank Li
- A couple of imx6dl-yapp4 board update from Michal Vokáč to enable
pwm-beeper and model the RGB LED as a single multi-led part
- Enable PMIC RTC on imx53-qsrb board
- Correct rtc compatible for imx6q-evi board
- Add sy7636 support for e70k02 board
- Replace license text comment with SPDX identifier for imx53-usbarmory
board
- Add I2S audio support for imx28-amarula-rmm board
* tag 'imx-dt-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (29 commits)
ARM: dts: imx6qdl: make VAR-SOM SoM SoC-agnostic
ARM: dts: imx6dl-yapp4: Model the RGB LED as a single multi-led part
ARM: dts: imx6dl-yapp43: Enable pwm-beeper on boards with speaker
ARM: dts: imx: e70k02: add sy7636
ARM: dts: imx28-amarula-rmm: add I2S audio
ARM: dts: imx: add vdd-supply and vddio-supply for fsl,mpl3115
ARM: dts: imx7ulp: remove bias-pull-up
ARM: dts: remove undocumented clock-names for ov5642
ARM: dts: add device_type for memory node
ARM: dts: Add bus type for parallel ov5640
ARM: dts: imx6q-cm-fx6.dts: add supplies for wm8731
ARM: dts: imx6qdl-skov-cpu fix typo interrupt
ARM: dts: imx: remove redundant linux,phandle
ARM: dts: imx6ull-dhcom-pdk2: rename power-supply to vcc-supply for touchscreen
ARM: dts: imx: add power-supply for lcd panel
ARM: dts: imx6qdl-nitrogen6_max: rename i2c<n>mux to i2c
ARM: dts: imx6ull-phytec-tauri: remove extra space before jedec,spi-nor
ARM: dts: imx6q-utilite-pro: add missing required property for pci
ARM: dts: imx6-tbs2910: rename ir_recv to ir-receiver
ARM: dts: imx6: remove pinctrl-name if pinctrl-0 doesn't exist
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.19-rc1
Add more host1x devices on Tegra114 and Tegra124, as well as CSI for
Tegra20 and Tegra30. Support for the Xiaomi Mi Pad is also added.
* tag 'tegra-for-6.19-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Add device-tree for Xiaomi Mi Pad (A0101)
ARM: tegra: add CSI nodes for Tegra20 and Tegra30
ARM: tegra: Add missing HOST1X device nodes on Tegra124
ARM: tegra: Add missing HOST1X device nodes on Tegra114
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.19 (take two)
- Add Imagination Technologies PowerVR Series 7XE GE7800 GPU support
for the R-Car M3-N and V3U SoCs,
- Add Ethernet support for the RZ/T2H and RZ/N2H SoCs and their
evaluation boards,
- Add ADC support for the RZ/N1D SoC,
- Add thermal, NMI pushbutton, and RTC support for the RZ/V2H SoC and
the RZ/V2H EVK development board,
- Add USB2.0 support for the RZ/G3S SoC and the RZ/G3S SMARC Carrier
II board.
* tag 'renesas-dts-for-v6.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: rzt2h-n2h-evk: Enable Ethernet support
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable RTC
arm64: dts: renesas: r9a09g057: Add RTC node
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Add NMI pushbutton support
arm64: dts: renesas: rzg3s-smarc: Enable USB support
arm64: dts: renesas: r9a08g045: Add USB support
arm64: dts: renesas: r9a09g057: Add TSU nodes
ARM: dts: renesas: r9a06g032: Add the ADC device
arm64: dts: renesas: r9a09g087: Add GMAC nodes
arm64: dts: renesas: r9a09g077: Add GMAC nodes
arm64: dts: renesas: r9a09g087: Add ETHSS node
arm64: dts: renesas: r9a09g077: Add ETHSS node
arm64: dts: renesas: r8a779a0: Add GE7800 GPU node
arm64: dts: renesas: r8a77965: Add GE7800 GPU node
dt-bindings: clock: r8a779a0: Add ZG core clock
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM32 Device Tree updates
This performs a cleanup of the MT6582 devicetrees and adds support
for secondary cores bringup on this SoC.
This also introduces basic support for a new machine, the MT6582
Alcatel "yarisxl" Pop C7 (OT-7041D) smartphone, with support for
booting into a initramfs with UART console output.
* tag 'mtk-dts32-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
ARM: dts: mediatek: drop wrong syscon hifsys compatible for MT2701/7623
ARM: dts: mediatek: add basic support for Alcatel yarisxl board
dt-bindings: arm: mediatek: Add MT6582 yarisxl
ARM: dts: mediatek: mt6582: add enable-method property to cpus
ARM: dts: mediatek: mt6582: add clock-names property to uart nodes
ARM: dts: mediatek: mt6582: add mt6582 compatible to timer
ARM: dts: mediatek: mt6582: remove compatible property from root node
ARM: dts: mediatek: mt6582: sort nodes and properties
ARM: dts: mediatek: mt6582: move MMIO devices under soc node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.19
- Add thermal support for the RZ/G3S and RZ/G3E SoCs,
- Add DT overlay support for the Raspberry Pi Display 2 and Argon40
fan hats on the Retronix Sparrow Hawk board,
- Add eMMC support for the Eagle Function expansion board,
- Add initial support for the R-Car X5H (R8A78000) SoC and the
Ironhide development board,
- Move interrupt-parent properties to root nodes,
- Add system watchdog timer support for R-Car Gen3 and Gen4 SoCs,
which is reserved for secure firmware on R-Car Gen3 boards,
- Add ADC support for the RZ/T2H and RZ/N2H SoCs and their evaluation
boards,
- Add watchdog timer support on the R-Car V3M Starter Kit board,
- Add Cortex-A55 PMU support on the RZ/V2H, RZ/V2N, RZ/T2H, and RZ/N2H
SoCs,
- Add Imagination Technologies PowerVR Series 6XT GX6250 GPU support
on the R-Car M3-W and M3-W+ SoCs,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (80 commits)
arm64: dts: renesas: sparrow-hawk: Fix full-size DP connector node name and labels
arm64: dts: renesas: r8a77961: Add GX6250 GPU node
arm64: dts: renesas: r8a77960: Add GX6250 GPU node
ARM: dts: renesas: kzm9g: Name interrupts for accelerometer
arm64: dts: renesas: r9a09g087: Add Cortex-A55 PMU node
arm64: dts: renesas: r9a09g077: Add Cortex-A55 PMU node
arm64: dts: renesas: r9a09g056: Add Cortex-A55 PMU node
arm64: dts: renesas: r9a09g057: Add Cortex-A55 PMU node
ARM: dts: renesas: r9a06g032-rzn1d400-db: Drop invalid #cells properties
arm64: dts: renesas: v3msk: Enable watchdog timer
arm64: dts: renesas: r8a779h0: Add SWDT node
arm64: dts: renesas: r8a779g0: Add SWDT node
arm64: dts: renesas: r8a779f0: Add SWDT node
arm64: dts: renesas: r8a779a0: Add SWDT node
arm64: dts: renesas: rzt2h/rzn2h-evk: Enable ADCs
arm64: dts: renesas: r9a09g087: Add ADCs support
arm64: dts: renesas: r9a09g077: Add ADCs support
ARM: dts: renesas: koelsch: Update ADV7180 binding
ARM: dts: renesas: r9a06g032: Move interrupt-parent to root node
ARM: dts: renesas: r8a7794: Move interrupt-parent to root node
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/dt
First batch of ASPEED Arm devicetree changes for 6.19
Significant changes:
- The IBM Power11 FSI DTSIs have been rearranged to accommodate new systems
New platforms:
- IBM Balcones
The Balcones system is similar to Bonnell but with a POWER11 processor.
Like POWER10, the POWER11 is a dual-chip module, so a dual chip FSI
tree is needed.
- Meta Yosemite5
The Yosemite5 platform provides monitoring of voltages, power,
temperatures, and other critical parameters across the motherboard,
CXL board, E1.S expansion board, and NIC components.
Updated platforms:
- clemente (Meta): LEDs, shunt resistor configuration
- santabarbara (Meta): AMD APML, EEPROMs, LEDs, GPIO line names, MCTP for NICs
There are a scattering of one-off changes and devicetree cleanups for other
platforms as well.
* tag 'aspeed-6.19-devicetree-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
ARM: dts: aspeed: santabarbara: Add eeprom device node for PRoT module
ARM: dts: aspeed: santabarbara: Add AMD APML interface support
ARM: dts: aspeed: santabarbara: Add gpio line name
ARM: dts: aspeed: santabarbara: Add bmc_ready_noled Led
ARM: dts: aspeed: santabarbara: Enable MCTP for frontend NIC
ARM: dts: aspeed: santabarbara: Add sensor support for extension boards
ARM: dts: aspeed: santabarbara: Add blank lines between nodes for readability
ARM: dts: aspeed: yosemite5: Add Meta Yosemite5 BMC
dt-bindings: arm: aspeed: add Meta Yosemite5 board
ARM: dts: aspeed: clemente: Add HDD LED GPIO
ARM: dts: aspeed: Fix max31785 fan properties
ARM: dts: aspeed: Add Balcones system
dt-bindings: arm: aspeed: add IBM Bonnell board
dt-bindings: arm: aspeed: add IBM Balcones board
ARM: dts: aspeed: harma: Add MCTP I2C controller node
ARM: dts: aspeed: yosemite4: allocate ramoops for kernel panic
ARM: dts: aspeed: clemente: add shunt-resistor-micro-ohms for LM5066i
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Linux 6.18-rc6
Backmerge in order to merge msm next
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The Programmable Real-time Unit and Industrial Communication Subsystem
Megabit (ICSSM) is a microcontroller subsystem in TI SoCs such as
AM57x, AM437x, and AM335x. It provides real-time processing
capabilities for industrial communication and custom peripheral interfaces.
Currently, EVMs based on AM57x, AM437x, and AM335x use the ICSSM driver
for PRU-based Ethernet functionality.
This patch enables TI_PRUSS and TI_PRUETH as a module for TI SoCs.
Signed-off-by: Parvathi Pudi <parvathi@couthit.com>
Link: https://lore.kernel.org/r/20251103125451.1679404-1-parvathi@couthit.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Make SoM .dtsi SoC-agnostic by moving SoC include to board level
imx6qdl-var-som.dtsi currently includes imx6q.dtsi, which makes this SoM
description Quad/Dual specific and prevents reuse from i.MX6DL boards.
Changes:
- Move imx6q.dtsi include from imx6qdl-var-som.dtsi to
imx6q-var-mx6customboard.dts.
- Remove /dts-v1/; from imx6qdl-var-som.dtsi (dtsi files should not declare
version)
This keeps the SoM .dtsi SoC-agnostic (it already relies on imx6qdl.dtsi for
family-common parts) and allows boards using the DualLite or Solo to include
imx6dl.dtsi instead.
Why this is needed:
To reuse imx6qdl-var-som.dtsi on i.MX6DL board.
No functional changes for imx6q-var-mx6customboard are intended.
Signed-off-by: Stefan Prisacariu <stefan.prisacariu@prevas.dk>
Link: https://lore.kernel.org/all/20250925104942.4148376-1-stefan.prisacariu@prevas.dk/
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Describe the RGB LED indicator according to the reality - it is a single
part containing all the three R,G and B LEDs in one package.
With this description the chan-name property becomes useless, remove it.
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Lynx, Pegasus and Pegasus+ boards have a speaker connected to the PWM3.
Enable a pwm-beeper on these boards so the system can produce simple
sounds.
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the EPD PMIC for the e70k02 based devices as a step towards full EPD
support.
Acked-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Andreas Kemnade <akemnade@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for I2S audio on Amarula rmm board. Audio codec
TLV320AIC3X is connected as slave to SAIF0, which provides
bitclock, frame and MCLK.
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable TLV320AIC3X I2C codec and simple-card support used on Amarula
rmm board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Unlike standalone spi peripherals, on sama5d2, the flexcom spi have fifo
size of 32 data. Fix flexcom/spi nodes where this property is wrong.
Fixes: 6b9a3584c7ed ("ARM: dts: at91: sama5d2: Add missing flexcom definitions")
Cc: stable@vger.kernel.org # 5.8+
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20251114140225.30372-1-nicolas.ferre@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree files updates
for 6.18, please pull the following:
- Rafal fixes the Ethernet PHY address on the Luxul XAP-1440
* tag 'arm-soc/for-6.18/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM53573: Fix address of Luxul XAP-1440's Ethernet PHY
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.18:
- Enable ext4 support explicitly in imx_v6_v7_defconfig to fix a regression
caused by commit d6ace46c82fd ("ext4: remove obsolete EXT3 config options")
- Correct report-rate-hz setting for imx6ull-engicam-microgea-rmm board
- Fix MSI mapping for i.MX95 PCIe endpoint device nodes
- Fix USB OTG role switching for imx8mp-kontron board
- Fix a dt-schema warning caused by audmux node for imx51-zii-rdu1 board
- Avoid gpio0_mipi_csi GPIOs being deferred for i.MX8 img subsystem
* tag 'imx-fixes-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mp-kontron: Fix USB OTG role switching
arm64: dts: imx95: Fix MSI mapping for PCIe endpoint nodes
arm64: dts: imx8-ss-img: Avoid gpio0_mipi_csi GPIOs being deferred
arm: imx_v6_v7_defconfig: enable ext4 directly
ARM: dts: imx51-zii-rdu1: Fix audmux node names
ARM: dts: imx6ull-engicam-microgea-rmm: fix report-rate-hz value
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into arm/fixes
First batch of ASPEED fixes for 6.18
This time it's just the one fix addressing a PHY configuration regression in the
Fuji (Meta) platform's mac3 devicetree node.
* tag 'aspeed-6.18-fixes-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
ARM: dts: aspeed: fuji-data64: Enable mac3 controller
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
After commit d6ace46c82fd ("ext4: remove obsolete EXT3 config options")
was added, when using the 'tegra_defconfig' kernel configuration,
mounting an MMC device on Tegra20, Tegra30 and Tegra124 boards is
failing with "unknown filesystem type 'ext4'". Fix this by updating the
'tegra_defconfig' to use the EXT4 config options and remove the
obselete EXT2/3 options.
Fixes: d6ace46c82fd ("ext4: remove obsolete EXT3 config options")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The Mi Pad is a tablet computer based on Nvidia Tegra K1 SoC which
originally ran the Android operating system. The Mi Pad has a 7.9" IPS
display with 1536 x 2048 (324 ppi) resolution. 2 GB of RAM and 16/64 GB
of internal memory that can be supplemented with a microSDXC card giving
up to 128 GB of additional storage.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add CSI node to Tegra20 and Tegra30 device trees.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add nodes for devices on the HOST1X bus: VI, ISP, ISPB, MSENC and TSEC.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add nodes for devices on the HOST1X bus: VI, EPP, ISP, MSENC and TSEC.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
On some flexcom nodes related to uart, the fifo sizes were wrong: fix
them to 32 data.
Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Cc: stable@vger.kernel.org # 5.15+
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20251114103313.20220-2-nicolas.ferre@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
On some flexcom nodes related to uart, the fifo sizes were wrong: fix
them to 32 data. Note that product datasheet is being reviewed to fix
inconsistency, but this value is validated by product's designers.
Fixes: 261dcfad1b59 ("ARM: dts: microchip: add sama7d65 SoC DT")
Fixes: b51e4aea3ecf ("ARM: dts: microchip: sama7d65: Add FLEXCOMs to sama7d65 SoC")
Cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20251114103313.20220-1-nicolas.ferre@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Several drivers can benefit from registering per-instance data along
with the syscore operations. To achieve this, move the modifiable fields
out of the syscore_ops structure and into a separate struct syscore that
can be registered with the framework. Add a void * driver data field for
drivers to store contextual data that will be passed to the syscore ops.
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add the interrupt line that can be used for the early interrupt of
the IWDG2 to the IWDG2 node
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20251031-iwdg1-v2-4-2dc6e0116725@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
On the stm32mp135f-dk board, the IWDG1 is secured and used to monitor
the cortex-A7. Use the ARM SMC watchdog to communicate with it.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20251031-iwdg1-v2-3-2dc6e0116725@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add the arm_wdt node in the stm32mp131.dtsi SoC device tree file. When
the platform watchdog is managed by the secure world, SMC calls are used
to interact with it.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20251031-iwdg1-v2-2-2dc6e0116725@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add the IWDG1 node in the stm32mp131.dtsi SoC device tree file. It can
be used by Linux as the Cortex-A7 watchdog when it's configured as
non-secure.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20251031-iwdg1-v2-1-2dc6e0116725@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
The rk3288 power-controller node contains an assigned-clocks property
that conflicts with the bindings. From the git history it shows that they
wanted to assign the rk3288 EDP_24M clock input centrally before an edp
node was available. Move the edp assigned-clocks property to the edp node
to reduce dtbs_check output.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://patch.msgid.link/7d6fa223-ab90-4c44-9180-54df78467ea5@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The hung_task_panic sysctl is currently a blunt instrument: it's all or
nothing.
Panicking on a single hung task can be an overreaction to a transient
glitch. A more reliable indicator of a systemic problem is when
multiple tasks hang simultaneously.
Extend hung_task_panic to accept an integer threshold, allowing the
kernel to panic only when N hung tasks are detected in a single scan.
This provides finer control to distinguish between isolated incidents
and system-wide failures.
The accepted values are:
- 0: Don't panic (unchanged)
- 1: Panic on the first hung task (unchanged)
- N > 1: Panic after N hung tasks are detected in a single scan
The original behavior is preserved for values 0 and 1, maintaining full
backward compatibility.
[lance.yang@linux.dev: new changelog]
Link: https://lkml.kernel.org/r/20251015063615.2632-1-lirongqing@baidu.com
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Tested-by: Lance Yang <lance.yang@linux.dev>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au> [aspeed_g5_defconfig]
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Florian Wesphal <fw@strlen.de>
Cc: Jakub Kacinski <kuba@kernel.org>
Cc: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Simon Horman <horms@kernel.org>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As of writing, Documentation/Changes states the minimal versions of GNU C
being 8.1, Clang being 15.0.0 and binutils being 2.30. A few Kconfig help
texts are pointing out that specific GCC and Clang versions are needed,
but by now, those pointers to versions, such later than 4.0, later than
4.4, or clang later than 5.0, are obsolete and unlikely to be found by
users configuring their kernel builds anyway.
Drop these outdated remarks in Kconfig help texts referring to older
compiler and binutils versions. No functional change.
Link: https://lkml.kernel.org/r/20251010082138.185752-1-lukas.bulwahn@redhat.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Russel King <linux@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull scoped ksimd API for ARM and arm64 from Ard Biesheuvel:
"Introduce a more strict replacement API for
kernel_neon_begin()/kernel_neon_end() on both ARM and arm64, and
replace occurrences of the latter pair appearing in lib/crypto"
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
The ADC available in the r9a06g032 SoC can use up to two internal ADC
cores (ADC1 and ADC2) those internal cores are handled through ADC
controller virtual channels.
Describe this device.
Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251103141834.71677-4-herve.codina@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Implement the ksimd scoped guard API so that it can be used by code that
supports both ARM and arm64.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
While the Beaglebone capes have the Atmel AT24C256 chip (256kbit or 32kB),
the internal Beaglebone eeprom chip (i2c bus 0, addr 0x50), is an AT24C32
(32kbit or 4kB). Yet the device tree lists AT24C256 as the compatible chip
prior to this patch. You can confirm this by running
`sudo hexdump -C /sys/bus/nvmem/devices/0-00500/nvmem`. You can see the
factory data is repeated every 0x1000 addresses (every 4096 bytes or 32768
bits). This is because the read command wraps around to reading 0x0000 when
a user requests address 0x1000.
This is not a huge issue for reading, but it is for writing to the EEPROM
for two reasons:
1) If a user writes to addresses 0x1000 - 0x104e, they'll accidentally
overwrite the factory data stored at 0x0000 - 0x104e. This also is an issue
for writing to 0x2000 - 0x204e, and so on.
2) AT24C256 has 64-byte pages, but AT24C32 only has 32 byte pages. Thus, if
you attempt to write more than 32 bytes, bytes 32-64 will wrap around. This
causes your data in the actual EEPROM chip's bytes 0-32 to be overwritten by
the data in your request's bytes 32-64, while the EEPROM chip's bytes 32-64
remain 0xFF (unwritten). Lastly, the Beaglebone Black's user manual does
correctly mention that the internal EEPROM is 4kB (while capes are 32kB or
256kbit). It's just this bit of code that does not match.
Signed-off-by: George Kelly <george.kelly1097@gmail.com>
Link: https://lore.kernel.org/r/20251108102741.47628-1-george.kelly1097@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The i.MX6UL reference manual lists two possible interrupt lines for
SAI3 (56 and 57, offset +32). The current device tree entry uses
the first one (24), which prevents IRQs from being handled properly.
Use the second interrupt line (25), which does allow interrupts
to work as expected.
Fixes: 36e2edf6ac07 ("ARM: dts: imx6ul: add sai support")
Signed-off-by: Maarten Zanders <maarten@zanders.be>
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bring in the shared branch with the kbuild tree to enable
'-fms-extensions' for 6.19. Further namespace cleanup work
requires this extension.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add vdd-supply and vddio-supply for fsl,mpl3115 to fix below CHECK_DTBS
warnings:
arch/arm/boot/dts/nxp/imx/imx53-ppd.dtb: pressure-sensor@60 (fsl,mpl3115): 'vdd-supply' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Update the "nand-rb" pinctrl child node names to use the defined "-pins"
suffix fixing DT schema warnings.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
The LXA device trees are the only STM32MP1 device tree that specify
vusb_d/usb_a-supply and apparently not for good reason:
- vusb_d-supply (vdd_usb) is the same as the phy-supply for usbphyc_port1
- vusb_a-supply (reg18) is the same as vdda1v8-supply for usbphyc_port1
and usbphyc_port1 is linked to the usbotg_hs node via the phys property.
Specifying the regulators in the &usbotg_hs node is thus superfluous and
has been even found to be harmful in one instance:
Linux v6.10 was found to lock up every 50-125 or so reboots on the LXA
TAC when the DWC2 driver probe enables the regulators in bulk, unless
both properties were removed.
This issue was so far not reproducible on v6.17 (> 500 reboots), but as
these properties are unnecessary and different from other STM32MP1
boards, remove them anyway.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20251007-lxa-usb-dt-v1-1-cacde8088bb9@pengutronix.de
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Move st,adc-freq, st,mod-12b, st,ref-sel, and st,sample-time properties
from the touchscreen subnode to the parent touch@44 node. These properties
are defined in the st,stmpe.yaml schema for the parent node, not the
touchscreen subnode, resolving the validation error about unevaluated
properties.
Fixes: 27538a18a4fcc ("ARM: dts: stm32: add STM32MP1-based Phytec SoM")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250915224611.169980-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Change CONFIG_MMC_SPI from built-in to module in the
at91_dt_defconfig. This allows the MMC over SPI driver to
be loaded only when needed for WILC subsystem.
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://lore.kernel.org/r/20250923094552.430595-1-manikandan.m@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
"This is a work-around for a (now fixed) corner case in the arm32 build
with Clang KCFI enabled.
- Introduce __nocfi_generic for arm32 Clang (Nathan Chancellor)"
* tag 'hardening-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
libeth: xdp: Disable generic kCFI pass for libeth_xdp_tx_xmit_bulk()
ARM: Select ARCH_USES_CFI_GENERIC_LLVM_PASS
compiler_types: Introduce __nocfi_generic
|
|
When preprocessing arch/arm/boot/dts/ti/omap/am335x-mba335x.dts with
clang, there are a couple of warnings about '/*' within a block comment.
arch/arm/boot/dts/ti/omap/am335x-mba335x.dts:260:7: warning: '/*' within block comment [-Wcomment]
260 | /* /* gpmc_csn3.gpio2_0 - interrupt */
| ^
arch/arm/boot/dts/ti/omap/am335x-mba335x.dts:267:7: warning: '/*' within block comment [-Wcomment]
267 | /* /* gpmc_ben1.gpio1_28 - interrupt */
| ^
Remove the duplicate '/*' to clear up the warning.
Fixes: 5267fcd180b1 ("ARM: dts: omap: Add support for TQMa335x/MBa335x")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20251105-omap-mba335x-fix-clang-comment-warning-v2-1-f8a0003e1003@kernel.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
'Mic Jack' is connected to IN3_L and 'Mic Bias' is connected to 'Mic Jack'
Adjust routing accordingly.
Fixes: 5267fcd180b1 ("ARM: dts: omap: Add support for TQMa335x/MBa335x")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20251105083422.1010825-1-alexander.stein@ew.tq-group.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Remove the "ti,needs-special-reset", "ti,needs-special-hs-handling", and
"cap-mmc-dual-data-rate" properties from the DTS for the sdhci nodes,
as the sdhci-omap driver does not depend on these properties.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Link: https://lore.kernel.org/r/20251024-ti-sdhci-omap-v5-2-df5f6f033a38@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Rectify a typo for the property "vmmc-supply" to resolve the errors
detected by dtb_check.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Link: https://lore.kernel.org/r/20251024-ti-sdhci-omap-v5-1-df5f6f033a38@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The "ti,twl4030-power-n900" compatible string is obsolete and is not
supported by any in-kernel driver. Currently, the kernel falls back to
the second entry, "ti,twl4030-power-idle-osc-off", to bind a driver to
this node.
Make this fallback explicit by removing the obsolete board-specific
compatible. This preserves the existing functionality while making the
DTS compliant with the new, stricter 'ti,twl.yaml' binding.
Fixes: daebabd578647 ("mfd: twl4030-power: Fix PM idle pin configuration to not conflict with regulators")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250914192516.164629-4-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
