| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This release we have one new feature, support for chips that report
edge interrupts but don't provide distinct readback of that status per
line, plus a few cleanups"
* tag 'regmap-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: irq: Add support for chips without separate IRQ status
regmap-irq: Use dedicated interrupt wake setters
regmap: Move selecting for REGMAP_MDIO and REGMAP_IRQ
regcache: Use sort()'s default swap() implementation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have three new drivers, some refactoring in the GPIO core, lots of
various changes across many drivers, new configfs interface for the
virtual gpio-aggregator module and DT-bindings updates.
The treewide conversion of GPIO drivers to using the new value setter
callbacks is ongoing with another round of GPIO drivers updated. You
will also see these commits coming in from other subsystems as with
the relevant changes merged into mainline last cycle, I've started
converting GPIO providers located elsewhere than drivers/gpio/.
GPIO core:
- use more lock guards where applicable
- refactor GPIO ACPI code and shrink it in the process by 8%
- move GPIO ACPI quirks into a separate file
- remove unneeded #ifdef
- convert GPIO devres helpers to using devm_add_action() where
applicable which shrinks and simplifies the code
- refactor GPIO descriptor validation in GPIO consumer interfaces
- don't allow setting values on input lines in the GPIO core which
will take off the burden from GPIO drivers of checking this down
the line
- provide gpiod_is_equal() as a way of safely comparing two GPIO
descriptors (the only current user is in regulator core)
New drivers:
- add the GPIO module for the max77759 multifunction device
- add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller
- add the GPIO driver for the Spacemit K1 SoC
Driver improvements:
- convert more drivers to using the new GPIO line value setter
callbacks
- convert more drivers to making the irq_chip immutable as is
recommended by the interrupt subsystem
- extend build testing coverage by enabling more modules to be built
with COMPILE_TEST=y
- extend the gpio-aggregator module with a configfs interface that
makes the setup easier for user-space than the existing
driver-level sysfs attributes and also adds more advanced
configuration features (such as referring to aggregated lines by
their original names or modifying their names as exposed by the
aggregated chip)
- add a missing mutex_destroy() in gpio-imx-scu
- add an OF polarity quirk for s5m8767
- allow building gpio-vf610 as a loadable module
- make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS
interface disabled (another small step towards getting rid of the
global GPIO numberspace)
- add support for level-triggered interrupts to gpio-pca953x
- don't double-check the ngpios property in gpio-ds4520 as GPIO core
already does it
- don't double-check the number of GPIOs in gpio-imx-scu as GPIO core
already does it
- remove unused callbacks from gpio-max3191x
DT bindings:
- add device-tree bindings for max77759, spacemit,k1 and blzp1600
(new drivers added this cycle)
- document more properties for gpio-vf610 and gpio-tegra186
- document a new pca95xx variant
- fix style of examples in several GPIO DT-binding documents
Misc:
- TODO list updates"
* tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (123 commits)
gpio: timberdale: select GPIOLIB_IRQCHIP
gpio: lpc18xx: select GPIOLIB_IRQCHIP
gpio: grgpio: select GPIOLIB_IRQCHIP
gpio: bcm-kona: select GPIOLIB_IRQCHIP
dt-bindings: gpio: vf610: add ngpios and gpio-reserved-ranges
gpio: davinci: select GPIOLIB_IRQCHIP
gpiolib-acpi: Update file references in the Documentation and MAINTAINERS
gpiolib: acpi: Move quirks to a separate file
gpiolib: acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
gpiolib: acpi: Handle deferred list via new API
gpiolib: acpi: Make sure we fill struct acpi_gpio_info
gpiolib: acpi: Switch to use enum in acpi_gpio_in_ignore_list()
gpiolib: acpi: Use temporary variable for struct acpi_gpio_info
gpiolib: remove unneeded #ifdef
gpio: mpc8xxx: select GPIOLIB_IRQCHIP
gpio: pxa: select GPIOLIB_IRQCHIP
gpio: pxa: Make irq_chip immutable
gpio: timberdale: Make irq_chip immutable
gpio: xgene-sb: Make irq_chip immutable
gpio: davinci: Make irq_chip immutable
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"Another set of timer API cleanups:
- Convert init_timer*(), try_to_del_timer_sync() and
destroy_timer_on_stack() over to the canonical timer_*()
namespace convention.
There is another large conversion pending, which has not been included
because it would have caused a gazillion of merge conflicts in next.
The conversion scripts will be run towards the end of the merge window
and a pull request sent once all conflict dependencies have been
merged"
* tag 'timers-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename destroy_timer_on_stack() as timer_destroy_on_stack()
treewide, timers: Rename try_to_del_timer_sync() as timer_delete_sync_try()
timers: Rename init_timers() as timers_init()
timers: Rename NEXT_TIMER_MAX_DELTA as TIMER_NEXT_MAX_DELTA
timers: Rename __init_timer_on_stack() as __timer_init_on_stack()
timers: Rename __init_timer() as __timer_init()
timers: Rename init_timer_on_stack_key() as timer_init_key_on_stack()
timers: Rename init_timer_key() as timer_init_key()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the MSI subsystem (core code and PCI):
- Switch the MSI descriptor locking to lock guards
- Replace a broken and naive implementation of PCI/MSI-X control word
updates in the PCI/TPH driver with a properly serialized variant in
the PCI/MSI core code.
- Remove the MSI descriptor abuse in the SCCI/UFS/QCOM driver by
replacing the direct access to the MSI descriptors with the proper
API function calls. People will never understand that APIs exist
for a reason...
- Provide core infrastructre for the upcoming PCI endpoint library
extensions. Currently limited to ARM GICv3+, but in theory
extensible to other architectures.
- Provide a MSI domain::teardown() callback, which allows drivers to
undo the effects of the prepare() callback.
- Move the MSI domain::prepare() callback invocation to domain
creation time to avoid redundant (and in case of ARM/GIC-V3-ITS
confusing) invocations on every allocation.
In combination with the new teardown callback this removes some
ugly hacks in the GIC-V3-ITS driver, which pretended to work around
the short comings of the core code so far. With this update the
code is correct by design and implementation.
- Make the irqchip MSI library globally available, provide a MSI
parent domain creation helper and convert a bunch of (PCI/)MSI
drivers over to the modern MSI parent mechanism. This is the first
step to get rid of at least one incarnation of the three PCI/MSI
management schemes.
- The usual small cleanups and improvements"
* tag 'irq-msi-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
PCI/MSI: Use bool for MSI enable state tracking
PCI: tegra: Convert to MSI parent infrastructure
PCI: xgene: Convert to MSI parent infrastructure
PCI: apple: Convert to MSI parent infrastructure
irqchip/msi-lib: Honour the MSI_FLAG_NO_AFFINITY flag
irqchip/mvebu: Convert to msi_create_parent_irq_domain() helper
irqchip/gic: Convert to msi_create_parent_irq_domain() helper
genirq/msi: Add helper for creating MSI-parent irq domains
irqchip: Make irq-msi-lib.h globally available
irqchip/gic-v3-its: Use allocation size from the prepare call
genirq/msi: Engage the .msi_teardown() callback on domain removal
genirq/msi: Move prepare() call to per-device allocation
irqchip/gic-v3-its: Implement .msi_teardown() callback
genirq/msi: Add .msi_teardown() callback as the reverse of .msi_prepare()
irqchip/gic-v3-its: Add support for device tree msi-map and msi-mask
dt-bindings: PCI: pci-ep: Add support for iommu-map and msi-map
irqchip/gic-v3-its: Set IRQ_DOMAIN_FLAG_MSI_IMMUTABLE for ITS
irqdomain: Add IRQ_DOMAIN_FLAG_MSI_IMMUTABLE and irq_domain_is_msi_immutable()
platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all()
genirq/msi: Rename msi_[un]lock_descs()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
"Boot code changes:
- A large series of changes to reorganize the x86 boot code into a
better isolated and easier to maintain base of PIC early startup
code in arch/x86/boot/startup/, by Ard Biesheuvel.
Motivation & background:
| Since commit
|
| c88d71508e36 ("x86/boot/64: Rewrite startup_64() in C")
|
| dated Jun 6 2017, we have been using C code on the boot path in a way
| that is not supported by the toolchain, i.e., to execute non-PIC C
| code from a mapping of memory that is different from the one provided
| to the linker. It should have been obvious at the time that this was a
| bad idea, given the need to sprinkle fixup_pointer() calls left and
| right to manipulate global variables (including non-pointer variables)
| without crashing.
|
| This C startup code has been expanding, and in particular, the SEV-SNP
| startup code has been expanding over the past couple of years, and
| grown many of these warts, where the C code needs to use special
| annotations or helpers to access global objects.
This tree includes the first phase of this work-in-progress x86
boot code reorganization.
Scalability enhancements and micro-optimizations:
- Improve code-patching scalability (Eric Dumazet)
- Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper)
CPU features enumeration updates:
- Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S.
Darwish)
- Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish,
Thomas Gleixner)
- Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish)
Memory management changes:
- Allow temporary MMs when IRQs are on (Andy Lutomirski)
- Opt-in to IRQs-off activate_mm() (Andy Lutomirski)
- Simplify choose_new_asid() and generate better code (Borislav
Petkov)
- Simplify 32-bit PAE page table handling (Dave Hansen)
- Always use dynamic memory layout (Kirill A. Shutemov)
- Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov)
- Make 5-level paging support unconditional (Kirill A. Shutemov)
- Stop prefetching current->mm->mmap_lock on page faults (Mateusz
Guzik)
- Predict valid_user_address() returning true (Mateusz Guzik)
- Consolidate initmem_init() (Mike Rapoport)
FPU support and vector computing:
- Enable Intel APX support (Chang S. Bae)
- Reorgnize and clean up the xstate code (Chang S. Bae)
- Make task_struct::thread constant size (Ingo Molnar)
- Restore fpu_thread_struct_whitelist() to fix
CONFIG_HARDENED_USERCOPY=y (Kees Cook)
- Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg
Nesterov)
- Always preserve non-user xfeatures/flags in __state_perm (Sean
Christopherson)
Microcode loader changes:
- Help users notice when running old Intel microcode (Dave Hansen)
- AMD: Do not return error when microcode update is not necessary
(Annie Li)
- AMD: Clean the cache if update did not load microcode (Boris
Ostrovsky)
Code patching (alternatives) changes:
- Simplify, reorganize and clean up the x86 text-patching code (Ingo
Molnar)
- Make smp_text_poke_batch_process() subsume
smp_text_poke_batch_finish() (Nikolay Borisov)
- Refactor the {,un}use_temporary_mm() code (Peter Zijlstra)
Debugging support:
- Add early IDT and GDT loading to debug relocate_kernel() bugs
(David Woodhouse)
- Print the reason for the last reset on modern AMD CPUs (Yazen
Ghannam)
- Add AMD Zen debugging document (Mario Limonciello)
- Fix opcode map (!REX2) superscript tags (Masami Hiramatsu)
- Stop decoding i64 instructions in x86-64 mode at opcode (Masami
Hiramatsu)
CPU bugs and bug mitigations:
- Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov)
- Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov)
- Restructure and harmonize the various CPU bug mitigation methods
(David Kaplan)
- Fix spectre_v2 mitigation default on Intel (Pawan Gupta)
MSR API:
- Large MSR code and API cleanup (Xin Li)
- In-kernel MSR API type cleanups and renames (Ingo Molnar)
PKEYS:
- Simplify PKRU update in signal frame (Chang S. Bae)
NMI handling code:
- Clean up, refactor and simplify the NMI handling code (Sohil Mehta)
- Improve NMI duration console printouts (Sohil Mehta)
Paravirt guests interface:
- Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov)
SEV support:
- Share the sev_secrets_pa value again (Tom Lendacky)
x86 platform changes:
- Introduce the <asm/amd/> header namespace (Ingo Molnar)
- i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to
<asm/amd/fch.h> (Mario Limonciello)
Fixes and cleanups:
- x86 assembly code cleanups and fixes (Uros Bizjak)
- Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy
Shevchenko, Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav
Petkov, Chang S. Bae, Chao Gao, Dan Williams, Dave Hansen, David
Kaplan, David Woodhouse, Eric Biggers, Ingo Molnar, Josh Poimboeuf,
Juergen Gross, Malaya Kumar Rout, Mario Limonciello, Nathan
Chancellor, Oleg Nesterov, Pawan Gupta, Peter Zijlstra, Shivank
Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak, Xin Li)"
* tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (331 commits)
x86/bugs: Fix spectre_v2 mitigation default on Intel
x86/bugs: Restructure ITS mitigation
x86/xen/msr: Fix uninitialized variable 'err'
x86/msr: Remove a superfluous inclusion of <asm/asm.h>
x86/paravirt: Restrict PARAVIRT_XXL to 64-bit only
x86/mm/64: Make 5-level paging support unconditional
x86/mm/64: Make SPARSEMEM_VMEMMAP the only memory model
x86/mm/64: Always use dynamic memory layout
x86/bugs: Fix indentation due to ITS merge
x86/cpuid: Rename hypervisor_cpuid_base()/for_each_possible_hypervisor_cpuid_base() to cpuid_base_hypervisor()/for_each_possible_cpuid_base_hypervisor()
x86/cpu/intel: Rename CPUID(0x2) descriptors iterator parameter
x86/cacheinfo: Rename CPUID(0x2) descriptors iterator parameter
x86/cpuid: Rename cpuid_get_leaf_0x2_regs() to cpuid_leaf_0x2()
x86/cpuid: Rename have_cpuid_p() to cpuid_feature()
x86/cpuid: Set <asm/cpuid/api.h> as the main CPUID header
x86/cpuid: Move CPUID(0x2) APIs into <cpuid/api.h>
x86/msr: Add rdmsrl_on_cpu() compatibility wrapper
x86/mm: Fix kernel-doc descriptions of various pgtable methods
x86/asm-offsets: Export certain 'struct cpuinfo_x86' fields for 64-bit asm use too
x86/boot: Defer initialization of VM space related global variables
...
|
|
Merge updates related to system sleep handling and runtime PM for 6.16-rc1:
- Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
Kalla).
- Move debug runtime PM attributes to runtime_attrs[] (Rafael Wysocki).
- Add new devm_ functions for enabling runtime PM and runtime PM
reference counting (Bence Csókás).
- Remove size arguments from strscpy() calls in the hibernation core
code (Thorsten Blum).
- Adjust the handling of devices with asynchronous suspend enabled
during system suspend and resume to start resuming them immediately
after resuming their parents and to start suspending such a device
immediately after suspending its first child (Rafael Wysocki).
- Adjust messages printed during tasks freezing to avoid using
pr_cont() (Andrew Sayers, Paul Menzel).
- Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
Zhang).
- Add missing wakeup source attribute relax_count to sysfs and
remove the space character at the end ofi the string produced by
pm_show_wakelocks() (Zijun Hu).
- Add configurable pm_test delay for hibernation (Zihuan Zhang).
- Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
cypd4226 device on Tegra boards from suspending prematurely (Jon
Hunter).
- Unbreak printing PM debug messages during hibernation and clean up
some related code (Rafael Wysocki).
* pm-runtime:
PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn()
PM: sysfs: Move debug runtime PM attributes to runtime_attrs[]
PM: runtime: Add new devm functions
* pm-sleep:
PM: freezer: Rewrite restarting tasks log to remove stray *done.*
PM: sleep: Introduce pm_sleep_transition_in_progress()
PM: sleep: Introduce pm_suspend_in_progress()
PM: sleep: Print PM debug messages during hibernation
ucsi_ccg: Disable async suspend in ucsi_ccg_probe()
PM: hibernate: add configurable delay for pm_test
PM: wakeup: Delete space in the end of string shown by pm_show_wakelocks()
PM: wakeup: Add missing wakeup source attribute relax_count
PM: sleep: Remove unnecessary !!
PM: sleep: Use two lines for "Restarting..." / "done" messages
PM: sleep: Make suspend of devices more asynchronous
PM: sleep: Suspend async parents after suspending children
PM: sleep: Resume children after resuming the parent
PM: hibernate: Remove size arguments when calling strscpy()
|
|
Pull block updates from Jens Axboe:
- ublk updates:
- Add support for updating the size of a ublk instance
- Zero-copy improvements
- Auto-registering of buffers for zero-copy
- Series simplifying and improving GET_DATA and request lookup
- Series adding quiesce support
- Lots of selftests additions
- Various cleanups
- NVMe updates via Christoph:
- add per-node DMA pools and use them for PRP/SGL allocations
(Caleb Sander Mateos, Keith Busch)
- nvme-fcloop refcounting fixes (Daniel Wagner)
- support delayed removal of the multipath node and optionally
support the multipath node for private namespaces (Nilay Shroff)
- support shared CQs in the PCI endpoint target code (Wilfred
Mallawa)
- support admin-queue only authentication (Hannes Reinecke)
- use the crc32c library instead of the crypto API (Eric Biggers)
- misc cleanups (Christoph Hellwig, Marcelo Moreira, Hannes
Reinecke, Leon Romanovsky, Gustavo A. R. Silva)
- MD updates via Yu:
- Fix that normal IO can be starved by sync IO, found by mkfs on
newly created large raid5, with some clean up patches for bdev
inflight counters
- Clean up brd, getting rid of atomic kmaps and bvec poking
- Add loop driver specifically for zoned IO testing
- Eliminate blk-rq-qos calls with a static key, if not enabled
- Improve hctx locking for when a plug has IO for multiple queues
pending
- Remove block layer bouncing support, which in turn means we can
remove the per-node bounce stat as well
- Improve blk-throttle support
- Improve delay support for blk-throttle
- Improve brd discard support
- Unify IO scheduler switching. This should also fix a bunch of lockdep
warnings we've been seeing, after enabling lockdep support for queue
freezing/unfreezeing
- Add support for block write streams via FDP (flexible data placement)
on NVMe
- Add a bunch of block helpers, facilitating the removal of a bunch of
duplicated boilerplate code
- Remove obsolete BLK_MQ pci and virtio Kconfig options
- Add atomic/untorn write support to blktrace
- Various little cleanups and fixes
* tag 'for-6.16/block-20250523' of git://git.kernel.dk/linux: (186 commits)
selftests: ublk: add test for UBLK_F_QUIESCE
ublk: add feature UBLK_F_QUIESCE
selftests: ublk: add test case for UBLK_U_CMD_UPDATE_SIZE
traceevent/block: Add REQ_ATOMIC flag to block trace events
ublk: run auto buf unregisgering in same io_ring_ctx with registering
io_uring: add helper io_uring_cmd_ctx_handle()
ublk: remove io argument from ublk_auto_buf_reg_fallback()
ublk: handle ublk_set_auto_buf_reg() failure correctly in ublk_fetch()
selftests: ublk: add test for covering UBLK_AUTO_BUF_REG_FALLBACK
selftests: ublk: support UBLK_F_AUTO_BUF_REG
ublk: support UBLK_AUTO_BUF_REG_FALLBACK
ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG
ublk: prepare for supporting to register request buffer automatically
ublk: convert to refcount_t
selftests: ublk: make IO & device removal test more stressful
nvme: rename nvme_mpath_shutdown_disk to nvme_mpath_remove_disk
nvme: introduce multipath_always_on module param
nvme-multipath: introduce delayed removal of the multipath head node
nvme-pci: derive and better document max segments limits
nvme-pci: use struct_size for allocation struct nvme_dev
...
|
|
Merge cpufreq updates for 6.16-rc1:
- Refactor cpufreq_online(), add and use cpufreq policy locking guards,
use __free() in policy reference counting, and clean up core cpufreq
code on top of that (Rafael Wysocki).
- Fix boost handling on CPU suspend/resume and sysfs updates (Viresh
Kumar).
- Fix des_perf clamping with max_perf in amd_pstate_update() (Dhananjay
Ugwekar).
- Add offline, online and suspend callbacks to the amd-pstate driver,
rename and use the existing amd_pstate_epp callbacks in it (Dhananjay
Ugwekar).
- Add support for the "Requested CPU Min frequency" BIOS option to the
amd-pstate driver (Dhananjay Ugwekar).
- Reset amd-pstate driver mode after running selftests (Swapnil
Sapkal).
- Add helper for governor checks to the schedutil cpufreq governor and
move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki).
- Populate the cpu_capacity sysfs entries from the intel_pstate driver
after registering asym capacity support (Ricardo Neri).
- Add support for enabling Energy-aware scheduling (EAS) to the
intel_pstate driver when operating in the passive mode on a hybrid
platform (Rafael Wysocki).
- Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan
Chancellor).
- Drop redundant cpus_read_lock() from store_local_boost() in the
cpufreq core (Seyediman Seyedarab).
- Replace sscanf() with kstrtouint() in the cpufreq code and use a
symbol instead of a raw number in it (Bowen Yu).
- Add support for autonomous CPU performance state selection to the
CPPC cpufreq driver (Lifeng Zheng).
* pm-cpufreq: (31 commits)
cpufreq: CPPC: Add support for autonomous selection
cpufreq: Update sscanf() to kstrtouint()
cpufreq: Replace magic number
cpufreq: drop redundant cpus_read_lock() from store_local_boost()
cpufreq/amd-pstate: Avoid shadowing ret in amd_pstate_ut_check_driver()
cpufreq: intel_pstate: Document hybrid processor support
cpufreq: intel_pstate: EAS: Increase cost for CPUs using L3 cache
cpufreq: intel_pstate: EAS support for hybrid platforms
cpufreq: Drop policy locking from cpufreq_policy_is_good_for_eas()
cpufreq: intel_pstate: Populate the cpu_capacity sysfs entries
arch_topology: Relocate cpu_scale to topology.[h|c]
cpufreq/sched: Move cpufreq-specific EAS checks to cpufreq
cpufreq/sched: schedutil: Add helper for governor checks
amd-pstate-ut: Reset amd-pstate driver mode after running selftests
cpufreq/amd-pstate: Add support for the "Requested CPU Min frequency" BIOS option
cpufreq/amd-pstate: Add offline, online and suspend callbacks for amd_pstate_driver
cpufreq: Force sync policy boost with global boost on sysfs update
cpufreq: Preserve policy's boost state after resume
cpufreq: Introduce policy_set_boost()
cpufreq: Don't unnecessarily call set_boost()
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: New device support, features and cleanup for 6.16 - take 2
Note - last minute rebase was to drop a typo patch that I'd accidentally
picked up (in the microblaze arch Kconfig)
Take 2 is due to that rebase messing up some fixes tags that were
referring to patches after that point.
There is a known merge conflict due to changes in neighbouring lines.
Stephen's resolution in linux-next is:
https://lore.kernel.org/linux-next/20250506155728.65605bae@canb.auug.org.au/
Added 3 named IIO reviewers to MAINTAINERS. This is a reflection of those
who have been doing much of this work for some time. Lars-Peter is
removed from the entry having moved on to other topics. Thanks
Nuno, David and Andy for stepping up and Lars-Peter for all your
hard work in the past!
Includes the usual mix of new device support, features and general
cleanup.
This time we also have some tree wide changes.
- Rip out the iio_device_claim_direct_scoped() as it proved hard to work
with. This series includes quite a few related cleanups such as use
of guard or factoring code out to allow direct returns.
- Switch from iio_device_claim/release_direct_mode() to new
iio_device_claim/release_direct() which is structured so that sparse
can warn on failed releases. There were a few false positives but
those were mostly in code that benefited from being cleaned up as part
of this process.
- Introduce iio_push_to_buffers_with_ts() to replace the _timestamp()
version over time. This version takes the size of the supplied buffer
which the core checks is at least as big as expected by calculation
from channel descriptions of those channels enabled. Use this in
an initial set of drivers.
- Add macros for IIO_DECLARE_BUFFER_WITH_TS() and
IIO_DECLARE_DMA_BUFFER_WITH_TS() to avoid lots of fiddly code to ensure
correctly aligned buffers for timestamps being added onto the end of
channel data.
New device support
------------------
adi,ad3530r
- New driver for AD3530, AD3530R, AD3531 and AD3531R DACs with
programmable gain controls. R variants have internal references.
adi,ad7476
- Add support (dt compatible only) for the Rohm BU79100G ADC which is
fully compatible with the ti,ads7866.
adi,ad7606
- Support ad7606c-16 and ad7606c-18 devices. Includes switch to dynamic
channel information allocation.
adi,ad7380
- Add support for the AD7389-4
dfrobot,sen0322
- New driver for this oxygen sensor.
mediatek,mt2701-auxadc
- Add binding for MT6893 which is fully compatible with already supported
MT8173.
meson-saradc
- Support the GXLX SoCs. Mostly this is a workaround for some unrelated
clock control bits found in the ADC register map.
nuvoton,nct7201
- New driver for NCT7201 and NCT7202 I2C ADCs.
rohm,bd79124
- New driver for this 12-bit, 8-channel SAR ADC.
- Switch to new set_rv etc gpio callbacks that were added in 6.15.
rohm,bd79703
- Add support for BD79700, BD79701 and BD79702 DACs that have subsets of
functionality of the already supported bd79703. Included making this
driver suitable for support device variants.
st,stm32-lptimer
- Add support for stm32pm25 to this trigger.
Features
--------
Beyond IIO
- Property iterator for named children.
core
- Enable writes for 64 bit integers used for standard IIO ABI elements.
Previously these could be read only.
- Helper library that should avoid code duplication for simpler ADC
bindings that have a child node per channel.
- Enforce that IIO_DMA_MINALIGN is always at least 8 (almost always true
and simplifies code on all significant architectures)
core/backend
- Add support to control source of data - useful when the HDL includes
things like generated ramps for testing purposes. Enable this for
adi-axi-dac
adi,ad3552-hs
- Add debugfs related callbacks to allow debug access to register contents.
adi,ad4000
- Support SPI offload with appropriate FPGA firmware along with improving
documentation.
adi,ad7293
- Add support for external reference voltage.
adi,ad7606
- Support SPI offload.
adi,ad7768-1
- Support reset GPIO.
adi,admv8818
- Support filter frequencies beyond 2^32.
adi,adxl345
- Add single and double tap events.
hid-sensor-prox
- Support 16-bit report sizes as seen on some Intel platforms.
invensense,icm42600
- Enable use of named interrupts to avoid problems with some wiring choices.
Get the interrupt by name, but fallback to previous assumption on the first
being INT1 if no names are supplied.
microchip,mcp3911
- Add reset gpio support.
rohm,bh7150
- Add reset gpio support.
st,stm32
- Add support to control oversampling.
ti,adc128s052
- Add support for ROHM BD79104 which is early compatible with the TI
parts already supported by this driver. Includes some general driver
cleanup and a separate dt binding.
- Simplify reference voltage handling by assuming it is fixed after enabling
the supply.
winsen,mhz19b
- New driver for this C02 sensor.
Cleanup and minor fixes
-----------------------
dt-bindings
- Correct indentation and style for DTS examples.
- Use unevalutateProperties for SPI devices instead of additionalProperties
to allow generic SPI properties from spi-peripheral-props.yaml
ABI Docs
- Add missing docs for sampling_frequency when it applies only to events.
Treewide
- Various minor tweaks, comment fixes and similar.
- Sort TI ADCs in Kconfig that had gotten out of order.
- Switch various drives that provide GPIO chip functionality to the new
callbacks with return values.
- Standardize on { } formatting for all array sentinels.
- Make use of aligned_s64 in a few places to replace either wrong types
or manually defined equivalents.
- Drop places where spi bits_per_word is set to 8 because that is the
default anyway.
adi,ad_sigma_delta library
- Avoid a potential use of uninitialized data if reg_size has a value
that is not supported (no drivers hit this but it is reasonable hardening)
adi,ad4030
- Add error checking for scan types and no longer store it in state.
- Rework code to reduce duplication.
- Move setting the mode from buffer preenable() to update_scan_mode(),
better matching expected semantics of the two different callbacks.
- Improve data marshalling comments.
adi,ad4695
- Use u16 for buffer elements as oversampling is not yet supported except
with SPI offload (which doesn't use this path).
adi,ad5592r
- Clean up destruction of mutexes.
- Use lock guards to simplify code (later patch fixes a missed unlock)
adi,ad5933
- Correct some incorrect settling times.
adi,ad7091
- Deduplicate handling of writable vs volatile registers as they are the
inverse of each other for this device.
adi,ad7124
- Fix 3db Filter frequency.
- Remove ability to directly write the filter frequency (which was broken)
- Register naming improvements.
adi,ad7606
- Add a missing return value check.
- Fill in max sampling rates for all chips.
- Use devm_mutex_init()
- Fix up some kernel-doc formatting issues.
- Remove some camel case that snuck in.
- Drop setting address field in channels as easily established from other
fields.
- Drop unnecessary parameter to ad76060_scale_setup_cb_t.
adi,ad7768-1
- Convert to regmap.
- Factor out buffer allocation.
- Tidy up headers.
adi,ad7944
- Stop setting bits_per_word in SPI xfers with no data.
adi,ad9832
- Add of_device_id table rather than just relying on fallbacks.
- Use FIELD_PREP() to set values of fields.
adi,admv1013
- Cleanup a pointless ternary.
adi,admv8818
- Fix up LPF Band 5 frequency which was slightly wrong.
- Fix an integer overflow.
- Fix range calculation
adi,adt7316
- Replace irqd_get_trigger_type(irq_get_irq_data()) with simpler
irq_get_trigger_type()
adi,adxl345
- Use regmap cache instead of various state variables that were there to
reduce bus accesses.
- Make regmap return value checking consistent across all call sites.
adi,axi-dac
- Add a check on number of channels (0 to 15 valid)
allwinner,sun20i
- Use new adc-helpers to replace local parsing code for channel nodes.
bosch,bmp290
- Move to local variables for sensor data marshalling removing the need
for a messy definition that has to work for all supported parts.
Follow up fix adds a missing initialization.
dynaimage,al3010 and dynaimage,al3320a
- Various minor cleanup to bring these drivers inline with reviewed feedback
given on a new driver.
- Fix an error path in which power down is not called when it should be.
- Switch to regmap.
google,cros_ec
- Fix up a flexible array in middle of structure warning.
- Flush fifo when changing the timeout to avoid potential long wait
for samples.
hid-sensor-rotation
- Remove an __aligned(16) marking that doesn't seem to be justified.
kionix,kxcjk-1013
- Deduplicate code for setting up interrupts.
microchip,mcp3911
- Fix handling of conversion results register which differs across supported
devices.
idt,zopt2201
- Avoid duplicating register lists as all volatile registers are the
inverse of writeable registers on this device.
renesas,rzg2l
- Use new adc-helpers to replace local parsing code for channel nodes.
ti,ads1298
- Fix a missing Kconfig dependency.
* tag 'iio-for-6.16a-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (260 commits)
dt-bindings: iio: adc: Add ROHM BD79100G
iio: adc: add support for Nuvoton NCT7201
dt-bindings: iio: adc: add NCT7201 ADCs
iio: chemical: Add driver for SEN0322
dt-bindings: trivial-devices: Document SEN0322
iio: adc: ad7768-1: reorganize driver headers
iio: bmp280: zero-init buffer
iio: ssp_sensors: optimalize -> optimize
HID: sensor-hub: Fix typo and improve documentation
iio: admv1013: replace redundant ternary operator with just len
iio: chemical: mhz19b: Fix error code in probe()
iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS
iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS
iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS
iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
iio: make IIO_DMA_MINALIGN minimum of 8 bytes
iio: pressure: zpa2326_spi: remove bits_per_word = 8
iio: pressure: ms5611_spi: remove bits_per_word = 8
...
|
|
Some GPIO chips allow to rise an IRQ on GPIO level changes but do not
provide an IRQ status for each separate line: only the current gpio
level can be retrieved.
Add support for these chips, emulating IRQ status by comparing GPIO
levels with the levels during the previous interrupt.
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250522-mdb-max7360-support-v9-5-74fc03517e41@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On machines with multiple memory nodes, interleaving page allocations
across nodes allows for better utilization of each node's bandwidth.
Previous work by Gregory Price [1] introduced weighted interleave, which
allowed for pages to be allocated across nodes according to user-set
ratios.
Ideally, these weights should be proportional to their bandwidth, so that
under bandwidth pressure, each node uses its maximal efficient bandwidth
and prevents latency from increasing exponentially.
Previously, weighted interleave's default weights were just 1s -- which
would be equivalent to the (unweighted) interleave mempolicy, which goes
through the nodes in a round-robin fashion, ignoring bandwidth
information.
This patch has two main goals: First, it makes weighted interleave easier
to use for users who wish to relieve bandwidth pressure when using nodes
with varying bandwidth (CXL). By providing a set of "real" default
weights that just work out of the box, users who might not have the
capability (or wish to) perform experimentation to find the most optimal
weights for their system can still take advantage of bandwidth-informed
weighted interleave.
Second, it allows for weighted interleave to dynamically adjust to
hotplugged memory with new bandwidth information. Instead of manually
updating node weights every time new bandwidth information is reported or
taken off, weighted interleave adjusts and provides a new set of default
weights for weighted interleave to use when there is a change in bandwidth
information.
To meet these goals, this patch introduces an auto-configuration mode for
the interleave weights that provides a reasonable set of default weights,
calculated using bandwidth data reported by the system. In auto mode,
weights are dynamically adjusted based on whatever the current bandwidth
information reports (and responds to hotplug events).
This patch still supports users manually writing weights into the nodeN
sysfs interface by entering into manual mode. When a user enters manual
mode, the system stops dynamically updating any of the node weights, even
during hotplug events that shift the optimal weight distribution.
A new sysfs interface "auto" is introduced, which allows users to switch
between the auto (writing 1 or Y) and manual (writing 0 or N) modes. The
system also automatically enters manual mode when a nodeN interface is
manually written to.
There is one functional change that this patch makes to the existing
weighted_interleave ABI: previously, writing 0 directly to a nodeN
interface was said to reset the weight to the system default. Before this
patch, the default for all weights were 1, which meant that writing 0 and
1 were functionally equivalent. With this patch, writing 0 is invalid.
Link: https://lkml.kernel.org/r/20250520141236.2987309-1-joshua.hahnjy@gmail.com
[joshua.hahnjy@gmail.com: wordsmithing changes, simplification, fixes]
Link: https://lkml.kernel.org/r/20250511025840.2410154-1-joshua.hahnjy@gmail.com
[joshua.hahnjy@gmail.com: remove auto_kobj_attr field from struct sysfs_wi_group]
Link: https://lkml.kernel.org/r/20250512142511.3959833-1-joshua.hahnjy@gmail.com
https://lore.kernel.org/linux-mm/20240202170238.90004-1-gregory.price@memverge.com/ [1]
Link: https://lkml.kernel.org/r/20250505182328.4148265-1-joshua.hahnjy@gmail.com
Co-developed-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Suggested-by: Yunjeong Mun <yunjeong.mun@sk.com>
Suggested-by: Oscar Salvador <osalvador@suse.de>
Suggested-by: Ying Huang <ying.huang@linux.alibaba.com>
Suggested-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Huang Ying <ying.huang@linux.alibaba.com>
Reviewed-by: Honggyu Kim <honggyu.kim@sk.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use enable_irq_wake() and disable_irq_wake() instead of
calling low-level irq_set_irq_wake() with a parameter.
No functional changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250521135538.1086717-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If either REGMAP_IRQ or REGMAP_MDIO are set then REGMAP is also set.
This then enables the selecting of IRQ_DOMAIN or MDIO_BUS from REGMAP
based on the above two symbols respectively. This makes it very easy
to end up with "circular dependencies".
Instead select the IRQ_DOMAIN or MDIO_BUS from the symbols that make
use of them. This is almost equivalent to before but makes it less
likely to end up with false circular dependency detections.
Signed-off-by: Andrew Davis <afd@ti.com>
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Closes: https://lore.kernel.org/r/bfe991fa-f54c-4d58-b2e0-34c4e4eb48f4@linaro.org/
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250516141722.13772-1-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
pm_runtime_put_autosuspend() schedules a hrtimer to expire
at "dev->power.timer_expires". If the hrtimer's callback,
pm_suspend_timer_fn(), observes that the current time equals
"dev->power.timer_expires", it unexpectedly bails out instead of
proceeding with runtime suspend.
pm_suspend_timer_fn():
if (expires > 0 && expires < ktime_get_mono_fast_ns()) {
dev->power.timer_expires = 0;
rpm_suspend(..)
}
Additionally, as ->timer_expires is not cleared, all the future auto
suspend requests will not schedule hrtimer to perform auto suspend.
rpm_suspend():
if ((rpmflags & RPM_AUTO) &&...) {
if (!(dev->power.timer_expires && ...) { <-- this will fail.
hrtimer_start_range_ns(&dev->power.suspend_timer,...);
}
}
Fix this by as well checking if current time reaches the set expiration.
Co-developed-by: Patrick Daly <quic_pdaly@quicinc.com>
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Link: https://patch.msgid.link/20250515064125.1211561-1-quic_charante@quicinc.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The "suspend in progress" check in device_wakeup_enable() does not
cover hibernation, but arguably it should do that, so introduce
pm_sleep_transition_in_progress() covering transitions during both
system suspend and hibernation to use in there and use it also in
pm_debug_messages_should_print().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/7820474.EvYhyI6sBW@rjwysocki.net
[ rjw: Move the new function definition under CONFIG_PM_SLEEP ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
Introduce pm_suspend_in_progress() to be used for checking if a system-
wide suspend or resume transition is in progress, instead of comparing
pm_suspend_target_state directly to PM_SUSPEND_ON, and use it where
applicable.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/2020901.PYKUYFuaPT@rjwysocki.net
|
|
Conflicts:
Documentation/admin-guide/hw-vuln/index.rst
arch/x86/include/asm/cpufeatures.h
arch/x86/kernel/alternative.c
arch/x86/kernel/cpu/bugs.c
arch/x86/kernel/cpu/common.c
drivers/base/cpu.c
include/linux/cpu.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947bab0 Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
We need the driver core fix in here as well for testing
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Merge series from Bence Csókás <csokas.bence@prolan.hu>:
The probe() function of the atmel-quadspi driver got quite convoluted,
especially since the addition of SAMA7G5 support, that was forward-ported
from an older vendor kernel. During the port, a bug was introduced, where
the PM get() and put() calls were imbalanced. To alleivate this - and
similar problems in the future - an effort was made to migrate as many
functions as possible, to their devm_ managed counterparts. The few
functions, which did not yet have a devm_ variant, are added in patch 1 of
this series. Patch 2 then uses these APIs to fix the probe() function.
|
|
Patch series "memory,x86,acpi: hotplug memory alignment advisement", v8.
When physical address regions are not aligned to memory block size, the
misaligned portion is lost (stranded capacity).
Block size (min/max/selected) is architecture defined. Most architectures
tend to use the minimum block size or some simplistic heurist. On x86,
memory block size increases up to 2GB, and is otherwise fitted to the
alignment of non-hotplug (i.e. not special purpose memory).
CXL exposes its memory for management through the ACPI CEDT (CXL Early
Detection Table) in a field called the CXL Fixed Memory Window. Per the
CXL specification, this memory must be aligned to at least 256MB.
When a CFMW aligns on a size less than the block size, this causes a loss
of up to 2GB per CFMW on x86. It is not uncommon for CFMW to be allocated
per-device - though this behavior is BIOS defined.
This patch set provides 3 things:
1) implement advise/query functions in driverse/base/memory.c to
report/query architecture agnostic hotplug block alignment advice.
2) update x86 memblock size logic to consider the hotplug advice
3) add code in acpi/numa/srat.c to report CFMW alignment advice
The advisement interfaces are design to be called during arch_init code
prior to allocator and smp_init. start_kernel will call these through
setup_arch() (via acpi and mm/init_64.c on x86), which occurs prior to
mm_core_init and smp_init - so no need for atomics.
There's an attempt to signal callers to advise() that query has already
occurred, but this is predicated on the notion that query actually occurs
(which presently only happens on the x86 arch). This is to assist
debugging future users. Otherwise, the advise() call has been marked
__init to help static discovery of bad call times.
Once query is called the first time, it will always return the same value.
Interfaces return -EBUSY and 0 respectively on systems without hotplug.
This patch (of 3):
Hotplug memory sources may have opinions on what the memblock size should
be - usually for alignment purposes. For example, CXL memory extents can
be 256MB with a matching alignment. If this size/alignment is smaller
than the block size, it can result in stranded capacity.
Implement memory_block_advise_max_size for use prior to allocator init,
for software to advise the system on the max block size.
Implement memory_block_probe_max_size for use by arch init code to
calculate the best block size. Use of advice is architecture defined.
The probe value can never change after first probe. Calls to advise after
probe will return -EBUSY to aid debugging.
On systems without hotplug, always return -ENODEV and 0 respectively.
Link: https://lkml.kernel.org/r/20250127153405.3379117-1-gourry@gourry.net
Link: https://lkml.kernel.org/r/20250127153405.3379117-2-gourry@gourry.net
Signed-off-by: Gregory Price <gourry@gourry.net>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Bruno Faccini <bfaccini@nvidia.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Robert Richter <rrichter@amd.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 ITS mitigation from Dave Hansen:
"Mitigate Indirect Target Selection (ITS) issue.
I'd describe this one as a good old CPU bug where the behavior is
_obviously_ wrong, but since it just results in bad predictions it
wasn't wrong enough to notice. Well, the researchers noticed and also
realized that thus bug undermined a bunch of existing indirect branch
mitigations.
Thus the unusually wide impact on this one. Details:
ITS is a bug in some Intel CPUs that affects indirect branches
including RETs in the first half of a cacheline. Due to ITS such
branches may get wrongly predicted to a target of (direct or indirect)
branch that is located in the second half of a cacheline. Researchers
at VUSec found this behavior and reported to Intel.
Affected processors:
- Cascade Lake, Cooper Lake, Whiskey Lake V, Coffee Lake R, Comet
Lake, Ice Lake, Tiger Lake and Rocket Lake.
Scope of impact:
- Guest/host isolation:
When eIBRS is used for guest/host isolation, the indirect branches
in the VMM may still be predicted with targets corresponding to
direct branches in the guest.
- Intra-mode using cBPF:
cBPF can be used to poison the branch history to exploit ITS.
Realigning the indirect branches and RETs mitigates this attack
vector.
- User/kernel:
With eIBRS enabled user/kernel isolation is *not* impacted by ITS.
- Indirect Branch Prediction Barrier (IBPB):
Due to this bug indirect branches may be predicted with targets
corresponding to direct branches which were executed prior to IBPB.
This will be fixed in the microcode.
Mitigation:
As indirect branches in the first half of cacheline are affected, the
mitigation is to replace those indirect branches with a call to thunk that
is aligned to the second half of the cacheline.
RETs that take prediction from RSB are not affected, but they may be
affected by RSB-underflow condition. So, RETs in the first half of
cacheline are also patched to a return thunk that executes the RET aligned
to second half of cacheline"
* tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftest/x86/bugs: Add selftests for ITS
x86/its: FineIBT-paranoid vs ITS
x86/its: Use dynamic thunks for indirect branches
x86/ibt: Keep IBT disabled during alternative patching
mm/execmem: Unify early execmem_cache behaviour
x86/its: Align RETs in BHB clear sequence to avoid thunking
x86/its: Add support for RSB stuffing mitigation
x86/its: Add "vmexit" option to skip mitigation on some CPUs
x86/its: Enable Indirect Target Selection mitigation
x86/its: Add support for ITS-safe return thunk
x86/its: Add support for ITS-safe indirect thunk
x86/its: Enumerate Indirect Target Selection (ITS) bug
Documentation: x86/bugs/its: Add ITS documentation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core fix for a regression for platform devices
that is a regression from a change that went into 6.15-rc1 that
affected Pixel devices. It has been in linux-next for over a week with
no reported problems"
* tag 'driver-core-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
platform: Fix race condition during DMA configure at IOMMU probe time
|
|
Indirect Target Selection (ITS) is a bug in some pre-ADL Intel CPUs with
eIBRS. It affects prediction of indirect branch and RETs in the
lower half of cacheline. Due to ITS such branches may get wrongly predicted
to a target of (direct or indirect) branch that is located in the upper
half of the cacheline.
Scope of impact
===============
Guest/host isolation
--------------------
When eIBRS is used for guest/host isolation, the indirect branches in the
VMM may still be predicted with targets corresponding to branches in the
guest.
Intra-mode
----------
cBPF or other native gadgets can be used for intra-mode training and
disclosure using ITS.
User/kernel isolation
---------------------
When eIBRS is enabled user/kernel isolation is not impacted.
Indirect Branch Prediction Barrier (IBPB)
-----------------------------------------
After an IBPB, indirect branches may be predicted with targets
corresponding to direct branches which were executed prior to IBPB. This is
mitigated by a microcode update.
Add cmdline parameter indirect_target_selection=off|on|force to control the
mitigation to relocate the affected branches to an ITS-safe thunk i.e.
located in the upper half of cacheline. Also add the sysfs reporting.
When retpoline mitigation is deployed, ITS safe-thunks are not needed,
because retpoline sequence is already ITS-safe. Similarly, when call depth
tracking (CDT) mitigation is deployed (retbleed=stuff), ITS safe return
thunk is not used, as CDT prevents RSB-underflow.
To not overcomplicate things, ITS mitigation is not supported with
spectre-v2 lfence;jmp mitigation. Moreover, it is less practical to deploy
lfence;jmp mitigation on ITS affected parts anyways.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
Some of the debug sysfs attributes for runtime PM are located
in the power_attrs[] table, so they are exposed even in the
pm_runtime_has_no_callbacks() case, unlike the other non-debug
sysfs attributes for runtime PM, which may be confusing.
Moreover, dev_attr_runtime_status.attr appears in two
places, which effectively causes it to be always exposed if
CONFIG_PM_ADVANCED_DEBUG is set, but otherwise it is exposed
only when pm_runtime_has_no_callbacks() returns 'false'.
Address this by putting all sysfs attributes for runtime PM into
runtime_attrs[].
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/12677254.O9o76ZdvQC@rjwysocki.net
|
|
There is wakeup source attribute 'active_count', but its counterpart
attribute 'relax_count' is missing.
Add 'relax_count' for consistency.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://patch.msgid.link/20250505-add_power_attrs-v1-1-10bc3c73c320@quicinc.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Move this API to the canonical timer_*() namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-10-mingo@kernel.org
|
|
arch_topology.c provides functionality to parse and scale CPU capacity.
It also provides a corresponding sysfs interface. Some architectures
parse and scale CPU capacity differently as per their own needs. On
Intel processors, for instance, it is responsibility of the Intel
P-state driver.
Relocate the implementation of that interface to a common location in
topology.c. Architectures can use the interface and populate it using
their own mechanisms.
An alternative approach would be to compile arch_topology.c even if
not needed only to get this interface. This approach would create
duplicated and conflicting functionality and data structures.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20250419025504.9760-2-ricardo.neri-calderon@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
platform_device_msi_free_irqs_all()
platform_device_msi_init_and_alloc_irqs() performs two tasks: allocating
the MSI domain for a platform device, and allocate a number of MSIs in that
domain.
platform_device_msi_free_irqs_all() only frees the MSIs, and leaves the MSI
domain alive.
Given that platform_device_msi_init_and_alloc_irqs() is the sole tool a
platform device has to allocate platform MSIs, it makes sense for
platform_device_msi_free_irqs_all() to teardown the MSI domain at the same
time as the MSIs.
This avoids warnings and unexpected behaviours when a driver repeatedly
allocates and frees MSIs.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20250414-ep-msi-v18-1-f69b49917464@nxp.com
|
|
The stat is always 0 now, so remove it and hardwire the user visible
output to 0.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250505081138.3435992-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
To avoid a race between the IOMMU probing thread and the device driver
async probing thread during configuration of the platform DMA, update
`platform_dma_configure()` to read `dev->driver` once and test if it's
NULL before using it. This ensures that we don't de-reference an invalid
platform driver pointer if the device driver is asynchronously bound
while configuring the DMA.
Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
Signed-off-by: Will McVicker <willmcvicker@google.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20250424180420.3928523-1-willmcvicker@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This user of SHA-256 does not support any other algorithm, so the
crypto_shash abstraction provides no value. Just use the SHA-256
library API instead, which is much simpler and easier to use.
Also take advantage of printk's built-in hex conversion using %*phN.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250428190909.852705-1-ebiggers@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules fixes from Petr Pavlu:
"A single series to properly handle the module_kobject creation.
This fixes a problem with missing /sys/module/<module>/drivers for
built-in modules"
* tag 'modules-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
drivers: base: handle module_kobject creation
kernel: globalize lookup_or_create_module_kobject()
kernel: refactor lookup_or_create_module_kobject()
kernel: param: rename locate_module_kobject
|
|
Use sort()'s default swap() implementation and remove the custom
regcache_defaults_swap() function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250428061318.88859-2-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add `devm_pm_runtime_set_active_enabled()` and
`devm_pm_runtime_get_noresume()` for simplifying
common cases in drivers.
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Link: https://patch.msgid.link/20250327195928.680771-3-csokas.bence@prolan.hu
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/brgl/linux into driver-core-next
Immutable tag for the driver core tree to pull from
devres: Move devm_*_action*() APIs to devres.h
devres: Add devm_is_action_added() helper
* tag 'gpiod-devm-is-action-added-for-v6.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
devres: Add devm_is_action_added() helper
devres: Move devm_*_action*() APIs to devres.h
|
|
We need the driver core fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In some code we would like to know if the action in device managed resources
was added by devm_add_action() family of calls. Introduce a helper for that.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250220162238.2738038-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- For some reason we went from zero to three maintainers for HFS/HFS+
in a matter of days. The lesson to learn from this might just be that
we need to threaten code removal more often!?
- Fix a regression introduced by enabling large folios for lage logical
block sizes. This has caused issues for noref migration with large
folios due to sleeping while in an atomic context.
New sleeping variants of pagecache lookup helpers are introduced.
These helpers take the folio lock instead of the mapping's private
spinlock. The problematic users are converted to the sleeping
variants and serialize against noref migration. Atomic users will
bail on seeing the new BH_Migrate flag.
This also shrinks the critical region of the mapping's private lock
and the new blocking callers reduce contention on the spinlock for
bdev mappings.
- Fix two bugs in do_move_mount() when with MOVE_MOUNT_BENEATH. The
first bug is using a mountpoint that is located on a mount we're not
holding a reference to. The second bug is putting the mountpoint
after we've called namespace_unlock() as it's no longer guaranteed
that it does stay a mountpoint.
- Remove a pointless call to vfs_getattr_nosec() in the devtmpfs code
just to query i_mode instead of simply querying the inode directly.
This also avoids lifetime issues for the dm code by an earlier bugfix
this cycle that moved bdev_statx() handling into vfs_getattr_nosec().
- Fix AT_FDCWD handling with getname_maybe_null() in the xattr code.
- Fix a performance regression for files when multiple callers issue a
close when it's not the last reference.
- Remove a duplicate noinline annotation from pipe_clear_nowait().
* tag 'vfs-6.15-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs/xattr: Fix handling of AT_FDCWD in setxattrat(2) and getxattrat(2)
MAINTAINERS: hfs/hfsplus: add myself as maintainer
splice: remove duplicate noinline from pipe_clear_nowait
devtmpfs: don't use vfs_getattr_nosec to query i_mode
fix a couple of races in MNT_TREE_BENEATH handling by do_move_mount()
fs: fall back to file_ref_put() for non-last reference
mm/migrate: fix sleep in atomic for large folios and buffer heads
fs/ext4: use sleeping version of sb_find_get_block()
fs/jbd2: use sleeping version of __find_get_block()
fs/ocfs2: use sleeping version of __find_get_block()
fs/buffer: use sleeping version of __find_get_block()
fs/buffer: introduce sleeping flavors for pagecache lookups
MAINTAINERS: add HFS/HFS+ maintainers
fs/buffer: split locking for pagecache lookups
|
|
The following 4 APIs are only used by drivers/base/power/wakeup.c
internally.
- wakeup_source_create()
- wakeup_source_destroy()
- wakeup_source_add()
- wakeup_source_remove()
Do not expose them by making them as static functions.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250420-fix_power-v2-1-9b938d2283aa@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
__devm_auxiliary_device_create()
This code was originally going to use error pointers but we decided it
should return NULL instead. The error pointer code in
__devm_auxiliary_device_create() was left over from the first version.
Update it to use NULL. No callers have been merged yet, so that makes
this change simple and self contained.
Fixes: eaa0d30216c1 ("driver core: auxiliary bus: add device creation helpers")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Leon Romanovsky <leon@kernel.org>
Link: https://lore.kernel.org/r/aAi7Kg3aTguFD0fU@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The recent move of the bdev_statx call to the low-level vfs_getattr_nosec
helper caused it being used by devtmpfs, which leads to deadlocks in
md teardown due to the block device lookup and put interfering with the
unusual lifetime rules in md.
But as handle_remove only works on inodes created and owned by devtmpfs
itself there is no need to use vfs_getattr_nosec vs simply reading the
mode from the inode directly. Switch to that to avoid the bdev lookup
or any other unintentional side effect.
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reported-by: Xiao Ni <xni@redhat.com>
Fixes: 777d0961ff95 ("fs: move the bdex_statx call to vfs_getattr_nosec")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/20250423045941.1667425-1-hch@lst.de
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Xiao Ni <xni@redhat.com>
Tested-by: Ayush Jain <Ayush.jain3@amd.com>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
There are a few use-cases where child nodes with a specific name need to
be parsed. Code like:
fwnode_for_each_child_node()
if (fwnode_name_eq())
...
can be found from a various drivers/subsystems. Adding a macro for this
can simplify things a bit.
In a few cases the data from the found nodes is later added to an array,
which is allocated based on the number of found nodes. One example of
such use is the IIO subsystem's ADC channel nodes, where the relevant
nodes are named as channel[@N].
Add helpers for iterating and counting device's sub-nodes with certain
name instead of open-coding this in every user.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://patch.msgid.link/2767173b7b18e974c0bac244688214bd3863ff06.1742560649.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
In analogy with previous changes, make device_suspend_late() and
device_suspend_noirq() start the async suspend of the device's parent
after the device itself has been processed and make dpm_suspend_late()
and dpm_noirq_suspend_devices() start processing "async" leaf devices
(that is, devices without children) upfront so they don't need to wait
for the other devices they don't depend on.
This change reduces the total duration of device suspend on some systems
measurably, but not significantly.
Suggested-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1924195.CQOukoFCf9@rjwysocki.net
|
|
In analogy with the previous change affecting the resume path,
make device_suspend() start the async suspend of the device's parent
after the device itself has been processed and make dpm_suspend() start
processing "async" leaf devices (that is, devices without children)
upfront so they don't need to wait for the "sync" devices they don't
depend on.
On the Dell XPS13 9360 in my office, this change reduces the total
duration of device suspend by approximately 100 ms (over 20%).
Suggested-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3541233.QJadu78ljV@rjwysocki.net
|
|
According to [1], the handling of device suspend and resume, and
particularly the latter, involves unnecessary overhead related to
starting new async work items for devices that cannot make progress
right away because they have to wait for other devices.
To reduce this problem in the resume path, use the observation that
starting the async resume of the children of a device after resuming
the parent is likely to produce less scheduling and memory management
noise than starting it upfront while at the same time it should not
increase the resume duration substantially.
Accordingly, modify the code to start the async resume of the device's
children when the processing of the parent has been completed in each
stage of device resume and only start async resume upfront for devices
without parents.
Also make it check if a given device can be resumed asynchronously
before starting the synchronous resume of it in case it will have to
wait for another that is already resuming asynchronously.
In addition to making the async resume of devices more friendly to
systems with relatively less computing resources, this change is also
preliminary for analogous changes in the suspend path.
On the systems where it has been tested, this change by itself does
not affect the overall system resume duration in a measurable way.
Link: https://lore.kernel.org/linux-pm/20241114220921.2529905-1-saravanak@google.com/ [1]
Suggested-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/22630663.EfDdHjke4D@rjwysocki.net
|
|
Old microcode is bad for users and for kernel developers.
For users, it exposes them to known fixed security and/or functional
issues. These obviously rarely result in instant dumpster fires in
every environment. But it is as important to keep your microcode up
to date as it is to keep your kernel up to date.
Old microcode also makes kernels harder to debug. A developer looking
at an oops need to consider kernel bugs, known CPU issues and unknown
CPU issues as possible causes. If they know the microcode is up to
date, they can mostly eliminate known CPU issues as the cause.
Make it easier to tell if CPU microcode is out of date. Add a list
of released microcode. If the loaded microcode is older than the
release, tell users in a place that folks can find it:
/sys/devices/system/cpu/vulnerabilities/old_microcode
Tell kernel kernel developers about it with the existing taint
flag:
TAINT_CPU_OUT_OF_SPEC
== Discussion ==
When a user reports a potential kernel issue, it is very common
to ask them to reproduce the issue on mainline. Running mainline,
they will (independently from the distro) acquire a more up-to-date
microcode version list. If their microcode is old, they will
get a warning about the taint and kernel developers can take that
into consideration when debugging.
Just like any other entry in "vulnerabilities/", users are free to
make their own assessment of their exposure.
== Microcode Revision Discussion ==
The microcode versions in the table were generated from the Intel
microcode git repo:
8ac9378a8487 ("microcode-20241112 Release")
which as of this writing lags behind the latest microcode-20250211.
It can be argued that the versions that the kernel picks to call "old"
should be a revision or two old. Which specific version is picked is
less important to me than picking *a* version and enforcing it.
This repository contains only microcode versions that Intel has deemed
to be OS-loadable. It is quite possible that the BIOS has loaded a
newer microcode than the latest in this repo. If this happens, the
system is considered to have new microcode, not old.
Specifically, the sysfs file and taint flag answer the question:
Is the CPU running on the latest OS-loadable microcode,
or something even later that the BIOS loaded?
In other words, Intel never publishes an authoritative list of CPUs
and latest microcode revisions. Until it does, this is the best that
Linux can do.
Also note that the "intel-ucode-defs.h" file is simple, ugly and
has lots of magic numbers. That's on purpose and should allow a
single file to be shared across lots of stable kernel regardless of if
they have the new "VFM" infrastructure or not. It was generated with
a dumb script.
== FAQ ==
Q: Does this tell me if my system is secure or insecure?
A: No. It only tells you if your microcode was old when the
system booted.
Q: Should the kernel warn if the microcode list itself is too old?
A: No. New kernels will get new microcode lists, both mainline
and stable. The only way to have an old list is to be running
an old kernel in which case you have bigger problems.
Q: Is this for security or functional issues?
A: Both.
Q: If a given microcode update only has functional problems but
no security issues, will it be considered old?
A: Yes. All microcode image versions within a microcode release
are treated identically. Intel appears to make security
updates without disclosing them in the release notes. Thus,
all updates are considered to be security-relevant.
Q: Who runs old microcode?
A: Anybody with an old distro. This happens all the time inside
of Intel where there are lots of weird systems in labs that
might not be getting regular distro updates and might also
be running rather exotic microcode images.
Q: If I update my microcode after booting will it stop saying
"Vulnerable"?
A: No. Just like all the other vulnerabilies, you need to
reboot before the kernel will reassess your vulnerability.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "Ahmed S. Darwish" <darwi@linutronix.de>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/all/20250421195659.CF426C07%40davehans-spike.ostc.intel.com
(cherry picked from commit 9127865b15eb0a1bd05ad7efe29489c44394bdc1)
|
|
module_add_driver() relies on module_kset list for
/sys/module/<built-in-module>/drivers directory creation.
Since,
commit 96a1a2412acba ("kernel/params.c: defer most of param_sysfs_init() to late_initcall time")
drivers which are initialized from subsys_initcall() or any other
higher precedence initcall couldn't find the related kobject entry
in the module_kset list because module_kset is not fully populated
by the time module_add_driver() refers it. As a consequence,
module_add_driver() returns early without calling make_driver_name().
Therefore, /sys/module/<built-in-module>/drivers is never created.
Fix this issue by letting module_add_driver() handle module_kobject
creation itself.
Fixes: 96a1a2412acb ("kernel/params.c: defer most of param_sysfs_init() to late_initcall time")
Cc: stable@vger.kernel.org # requires all other patches from the series
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Shyam Saini <shyamsaini@linux.microsoft.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250227184930.34163-5-shyamsaini@linux.microsoft.com
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
|
|
software_node_get_reference_args() wants to get @index-th element, so
the property value requires at least '(index + 1) * sizeof(*ref)' bytes
but that can not be guaranteed by current OOB check, and may cause OOB
for malformed property.
Fix by using as OOB check '((index + 1) * sizeof(*ref) > prop->length)'.
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250414-fix_swnode-v2-1-9c9e6ae11eab@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
