summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm
AgeCommit message (Collapse)Author
2020-04-08drm/amdgpu: fix typo for vcn1 idle checkJames Zhu
[ Upstream commit acfc62dc68770aa665cc606891f6df7d6d1e52c0 ] fix typo for vcn1 idle check Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-08drm/bochs: downgrade pci_request_region failure from error to warningGerd Hoffmann
[ Upstream commit 8c34cd1a7f089dc03933289c5d4a4d1489549828 ] Shutdown of firmware framebuffer has a bunch of problems. Because of this the framebuffer region might still be reserved even after drm_fb_helper_remove_conflicting_pci_framebuffers() returned. Don't consider pci_request_region() failure for the framebuffer region as fatal error to workaround this issue. Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200313084152.2734-1-kraxel@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-08drm/amd/display: Add link_rate quirk for Apple 15" MBP 2017Mario Kleiner
[ Upstream commit dec9de2ada523b344eb2428abfedf9d6cd0a0029 ] This fixes a problem found on the MacBookPro 2017 Retina panel: The panel reports 10 bpc color depth in its EDID, and the firmware chooses link settings at boot which support enough bandwidth for 10 bpc (324000 kbit/sec aka LINK_RATE_RBR2 aka 0xc), but the DP_MAX_LINK_RATE dpcd register only reports 2.7 Gbps (multiplier value 0xa) as possible, in direct contradiction of what the firmware successfully set up. This restricts the panel to 8 bpc, not providing the full color depth of the panel on Linux <= 5.5. Additionally, commit '4a8ca46bae8a ("drm/amd/display: Default max bpc to 16 for eDP")' introduced into Linux 5.6-rc1 will unclamp panel depth to its full 10 bpc, thereby requiring a eDP bandwidth for all modes that exceeds the bandwidth available and causes all modes to fail validation -> No modes for the laptop panel -> failure to set any mode -> Panel goes dark. This patch adds a quirk specific to the MBP 2017 15" Retina panel to override reported max link rate to the correct maximum of 0xc = LINK_RATE_RBR2 to fix the darkness and reduced display precision. Please apply for Linux 5.6+ to avoid regressing Apple MBP panel support. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-08drm/amdgpu: add fbdev suspend/resume on gpu resetEvan Quan
[ Upstream commit 063e768ebd27d3ec0d6908b7f8ea9b0a732b9949 ] This can fix the baco reset failure seen on Navi10. And this should be a low risk fix as the same sequence is already used for system suspend/resume. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-01drm/radeon: fix scatter-gather mapping with user pagesShane Francis
commit 47f7826c520ecd92ffbffe59ecaa2fe61e42ec70 upstream. Calls to dma_map_sg may return less segments / entries than requested if they fall on page bounderies. The old implementation did not support this use case. Fixes: be62dbf554c5 ("iommu/amd: Convert AMD iommu driver to the dma-iommu api") Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206461 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206895 Bug: https://gitlab.freedesktop.org/drm/amd/issues/1056 Signed-off-by: Shane Francis <bigbeeshane@gmail.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200325090741.21957-4-bigbeeshane@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-01drm/amdgpu: fix scatter-gather mapping with user pagesShane Francis
commit 0199172f933342d8b1011aae2054a695c25726f4 upstream. Calls to dma_map_sg may return less segments / entries than requested if they fall on page bounderies. The old implementation did not support this use case. Fixes: be62dbf554c5 ("iommu/amd: Convert AMD iommu driver to the dma-iommu api") Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206461 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206895 Bug: https://gitlab.freedesktop.org/drm/amd/issues/1056 Signed-off-by: Shane Francis <bigbeeshane@gmail.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200325090741.21957-3-bigbeeshane@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-01drm/prime: use dma length macro when mapping sgShane Francis
commit 42e67b479eab6d26459b80b4867298232b0435e7 upstream. As dma_map_sg can reorganize scatter-gather lists in a way that can cause some later segments to be empty we should always use the sg_dma_len macro to fetch the actual length. This could now be 0 and not need to be mapped to a page or address array Fixes: be62dbf554c5 ("iommu/amd: Convert AMD iommu driver to the dma-iommu api") Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206461 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206895 Bug: https://gitlab.freedesktop.org/drm/amd/issues/1056 Signed-off-by: Shane Francis <bigbeeshane@gmail.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200325090741.21957-2-bigbeeshane@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-01drm/exynos: Fix cleanup of IOMMU related objectsMarek Szyprowski
[ Upstream commit 07dc3678bacc2a75b1900febea7d996a31f178a2 ] Store the IOMMU mapping created by the device core of each Exynos DRM sub-device and restore it when the Exynos DRM driver is unbound. This fixes IOMMU initialization failure for the second time when a deferred probe is triggered from the bind() callback of master's compound DRM driver. This also fixes the following issue found using kmemleak detector: unreferenced object 0xc2137640 (size 64): comm "swapper/0", pid 1, jiffies 4294937900 (age 3127.400s) hex dump (first 32 bytes): 50 a3 14 c2 80 a2 14 c2 01 00 00 00 20 00 00 00 P........... ... 00 10 00 00 00 80 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<3acd268d>] arch_setup_dma_ops+0x4c/0x104 [<9f7d2cce>] of_dma_configure+0x19c/0x3a4 [<ba07704b>] really_probe+0xb0/0x47c [<4f510e4f>] driver_probe_device+0x78/0x1c4 [<7481a0cf>] device_driver_attach+0x58/0x60 [<0ff8f5c1>] __driver_attach+0xb8/0x158 [<86006144>] bus_for_each_dev+0x74/0xb4 [<10159dca>] bus_add_driver+0x1c0/0x200 [<8a265265>] driver_register+0x74/0x108 [<e0f3451a>] exynos_drm_init+0xb0/0x134 [<db3fc7ba>] do_one_initcall+0x90/0x458 [<6da35917>] kernel_init_freeable+0x188/0x200 [<db3f74d4>] kernel_init+0x8/0x110 [<1f3cddf9>] ret_from_fork+0x14/0x20 [<8cd12507>] 0x0 unreferenced object 0xc214a280 (size 128): comm "swapper/0", pid 1, jiffies 4294937900 (age 3127.400s) hex dump (first 32 bytes): 00 a0 ec ed 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<3acd268d>] arch_setup_dma_ops+0x4c/0x104 [<9f7d2cce>] of_dma_configure+0x19c/0x3a4 [<ba07704b>] really_probe+0xb0/0x47c [<4f510e4f>] driver_probe_device+0x78/0x1c4 [<7481a0cf>] device_driver_attach+0x58/0x60 [<0ff8f5c1>] __driver_attach+0xb8/0x158 [<86006144>] bus_for_each_dev+0x74/0xb4 [<10159dca>] bus_add_driver+0x1c0/0x200 [<8a265265>] driver_register+0x74/0x108 [<e0f3451a>] exynos_drm_init+0xb0/0x134 [<db3fc7ba>] do_one_initcall+0x90/0x458 [<6da35917>] kernel_init_freeable+0x188/0x200 [<db3f74d4>] kernel_init+0x8/0x110 [<1f3cddf9>] ret_from_fork+0x14/0x20 [<8cd12507>] 0x0 unreferenced object 0xedeca000 (size 4096): comm "swapper/0", pid 1, jiffies 4294937900 (age 3127.400s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<3acd268d>] arch_setup_dma_ops+0x4c/0x104 [<9f7d2cce>] of_dma_configure+0x19c/0x3a4 [<ba07704b>] really_probe+0xb0/0x47c [<4f510e4f>] driver_probe_device+0x78/0x1c4 [<7481a0cf>] device_driver_attach+0x58/0x60 [<0ff8f5c1>] __driver_attach+0xb8/0x158 [<86006144>] bus_for_each_dev+0x74/0xb4 [<10159dca>] bus_add_driver+0x1c0/0x200 [<8a265265>] driver_register+0x74/0x108 [<e0f3451a>] exynos_drm_init+0xb0/0x134 [<db3fc7ba>] do_one_initcall+0x90/0x458 [<6da35917>] kernel_init_freeable+0x188/0x200 [<db3f74d4>] kernel_init+0x8/0x110 [<1f3cddf9>] ret_from_fork+0x14/0x20 [<8cd12507>] 0x0 unreferenced object 0xc214a300 (size 128): comm "swapper/0", pid 1, jiffies 4294937900 (age 3127.400s) hex dump (first 32 bytes): 00 a3 14 c2 00 a3 14 c2 00 40 18 c2 00 80 18 c2 .........@...... 02 00 02 00 ad 4e ad de ff ff ff ff ff ff ff ff .....N.......... backtrace: [<08cbd8bc>] iommu_domain_alloc+0x24/0x50 [<b835abee>] arm_iommu_create_mapping+0xe4/0x134 [<3acd268d>] arch_setup_dma_ops+0x4c/0x104 [<9f7d2cce>] of_dma_configure+0x19c/0x3a4 [<ba07704b>] really_probe+0xb0/0x47c [<4f510e4f>] driver_probe_device+0x78/0x1c4 [<7481a0cf>] device_driver_attach+0x58/0x60 [<0ff8f5c1>] __driver_attach+0xb8/0x158 [<86006144>] bus_for_each_dev+0x74/0xb4 [<10159dca>] bus_add_driver+0x1c0/0x200 [<8a265265>] driver_register+0x74/0x108 [<e0f3451a>] exynos_drm_init+0xb0/0x134 [<db3fc7ba>] do_one_initcall+0x90/0x458 [<6da35917>] kernel_init_freeable+0x188/0x200 [<db3f74d4>] kernel_init+0x8/0x110 [<1f3cddf9>] ret_from_fork+0x14/0x20 Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-01drm/amdgpu: correct ROM_INDEX/DATA offset for VEGA20Hawking Zhang
[ Upstream commit f1c2cd3f8fb959123a9beba18c0e8112dcb2e137 ] The ROMC_INDEX/DATA offset was changed to e4/e5 since from smuio_v11 (vega20/arcturus). Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Tested-by: Candice Li <Candice.Li@amd.com> Reviewed-by: Candice Li <Candice.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-01drm/amd/display: update soc bb for nv14Martin Leung
[ Upstream commit d5349775c1726ce997b8eb4982cd85a01f1c8b42 ] [why] nv14 previously inherited soc bb from generic dcn 2, did not match watermark values according to memory team [how] add nv14 specific soc bb: copy nv2 generic that it was using from before, but changed num channels to 8 Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-25drm/i915: Handle all MCR rangesMatt Roper
commit fe8b7085cac3b0db03cdbb26d9309bc27325df0a upstream. The bspec documents multiple MCR ranges; make sure they're all captured by the driver. Bspec: 13991, 52079 Fixes: 592a7c5e082e ("drm/i915: Extend non readable mcr range") Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200311162300.1838847-2-matthew.d.roper@intel.com Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> (cherry picked from commit 415d1269975d3fc21c13a6ae8de7b5fe0e6febb1) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25drm/i915/execlists: Track active elements during dequeueChris Wilson
commit 9777d8b2d2a148bc5d46694ec4f2559282fec8cf upstream. Record the initial active element we use when building the next ELSP submission, so that we can compare against it latter to see if there's no change. Fixes: 44d0a9c05bc0 ("drm/i915/execlists: Skip redundant resubmission") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200311092624.10012-2-chris@chris-wilson.co.uk (cherry picked from commit 60ef5b7ac6a131f09d287a5f156c878c2c926a30) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25drm/bridge: dw-hdmi: fix AVI frame colorimetryJernej Skrabec
commit e8dca30f7118461d47e1c3510d0e31b277439151 upstream. CTA-861-F explicitly states that for RGB colorspace colorimetry should be set to "none". Fix that. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304232512.51616-2-jernej.skrabec@siol.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Revert "drm/i915/tgl: Add extra hdc flush workaround"Caz Yokoyama
commit c09f6b4d0883dfb859c1ddcfb04c3260ef310ce0 upstream. This reverts commit 36a6b5d964d995b536b1925ec42052ee40ba92c4. The commit takes care Wa_1604544889 which was fixed on a0 stepping based on a0 replan. So no SW workaround is required on any stepping now. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Fixes: 36a6b5d964d9 ("drm/i915/tgl: Add extra hdc flush workaround") Link: https://patchwork.freedesktop.org/patch/msgid/1c751032ce79c80c5485cae315f1a9904ce07cac.1583359940.git.caz.yokoyama@intel.com (cherry picked from commit 175c4d9b3b9a60b4ea0b8cd034011808c6a03b05) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25drm/lease: fix WARNING in idr_destroyQiujun Huang
commit b216a8e7908cd750550c0480cf7d2b3a37f06954 upstream. drm_lease_create takes ownership of leases. And leases will be released by drm_master_put. drm_master_put ->drm_master_destroy ->idr_destroy So we needn't call idr_destroy again. Reported-and-tested-by: syzbot+05835159fe322770fe3d@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1584518030-4173-1-git-send-email-hqjagain@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25drm/amd/amdgpu: Fix GPR read from debugfs (v2)Tom St Denis
commit 5bbc6604a62814511c32f2e39bc9ffb2c1b92cbe upstream. The offset into the array was specified in bytes but should be in terms of 32-bit words. Also prevent large reads that would also cause a buffer overread. v2: Read from correct offset from internal storage buffer. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Revert "drm/fbdev: Fallback to non tiled mode if all tiles not present"Sasha Levin
[ Upstream commit f053c83ad5c88427644e06746bfddcefa409c27d ] This reverts commit f25c7a006cd1 ("drm/fbdev: Fallback to non tiled mode if all tiles not present"). The commit causes flip done timeouts in CI. Below are the sample errors thrown in logs: [IGT] core_getversion: executing [IGT] core_getversion: exiting, ret=0 Setting dangerous option reset - tainting kernel drm:drm_atomic_helper_wait_for_dependencies] ERROR [CRTC:152:pipe B] flip_done timed out drm:drm_atomic_helper_wait_for_dependencies] ERROR [CONNECTOR:299:DP-2] flip_done timed out drm:drm_atomic_helper_wait_for_dependencies] ERROR [PLANE:92:plane 1B] flip_done timed out [drm:drm_atomic_helper_wait_for_flip_done] ERROR [CRTC:152:pipe B] flip_done timed out [drm:drm_atomic_helper_wait_for_dependencies] ERROR [CRTC:152:pipe B] flip_done timed out [drm:drm_atomic_helper_wait_for_dependencies] ERROR [CONNECTOR:299:DP-2] flip_done timed out [drm:drm_atomic_helper_wait_for_dependencies] ERROR [PLANE:92:plane 1B] flip_done timed out [drm:drm_atomic_helper_wait_for_flip_done] ERROR [CRTC:152:pipe B] flip_done timed out Console: switching to colour frame buffer device 480x135 [drm:drm_atomic_helper_wait_for_dependencies] ERROR [CRTC:152:pipe B] flip_done timed out [drm:drm_atomic_helper_wait_for_dependencies] ERROR [CONNECTOR:299:DP-2] flip_done timed out Reverting the change for now to unblock CI execution. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Fixes: f25c7a006cd1 ("drm/fbdev: Fallback to non tiled mode if all tiles not present") Closes: https://gitlab.freedesktop.org/drm/intel/issues/6 Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191123091840.32382-1-uma.shankar@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-25drm/amd/display: fix dcc swath size calculations on dcn1Josip Pavic
[ Upstream commit a0275dfc82c9034eefbeffd556cca6dd239d7925 ] [Why] Swath sizes are being calculated incorrectly. The horizontal swath size should be the product of block height, viewport width, and bytes per element, but the calculation uses viewport height instead of width. The vertical swath size is similarly incorrectly calculated. The effect of this is that we report the wrong DCC caps. [How] Use viewport width in the horizontal swath size calculation and viewport height in the vertical swath size calculation. Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-25drm/amd/display: Clear link settings on MST disable connectorBhawanpreet Lakha
[ Upstream commit 5ac7fd2f597b88ee81f4748ee50cab06192a8dc3 ] [Why] If we have a single MST display and we disconnect it, we dont disable that link. This causes the old link settings to still exist Now on a replug for MST we think its a link loss and will try to reallocate mst payload which will fail, throwing warning below. [ 129.374192] [drm] Failed to updateMST allocation table forpipe idx:0 [ 129.374206] ------------[ cut here ]------------ [ 129.374284] WARNING: CPU: 14 PID: 1710 at drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/core/dc_link.c:3153 dc_link_allocate_mst_payload+0x1f7/0x220 [amdgpu] [ 129.374285] Modules linked in: amdgpu(OE) amd_iommu_v2 gpu_sched ttm drm_kms_helper drm fb_sys_fops syscopyarea sysfillrect sysimgblt binfmt_misc nls_iso8859_1 edac_mce_amd snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio kvm snd_hda_codec_hdmi snd_hda_intel snd_intel_nhlt snd_hda_codec irqbypass snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul snd_seq crc32_pclmul ghash_clmulni_intel snd_seq_device snd_timer snd aesni_intel eeepc_wmi crypto_simd asus_wmi joydev cryptd sparse_keymap input_leds soundcore video glue_helper wmi_bmof mxm_wmi k10temp ccp mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid igb i2c_algo_bit ahci dca i2c_piix4 libahci gpio_amdpt wmi gpio_generic [ 129.374318] CPU: 14 PID: 1710 Comm: kworker/14:2 Tainted: G W OE 5.4.0-rc7bhawan+ #480 [ 129.374318] Hardware name: System manufacturer System Product Name/PRIME X370-PRO, BIOS 0515 03/30/2017 [ 129.374397] Workqueue: events dm_irq_work_func [amdgpu] [ 129.374468] RIP: 0010:dc_link_allocate_mst_payload+0x1f7/0x220 [amdgpu] [ 129.374470] Code: 52 20 e8 1c 63 ad f4 48 8b 5d d0 65 48 33 1c 25 28 00 00 00 b8 01 00 00 00 75 16 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 <0f> 0b e9 fa fe ff ff e8 ed 5b d6 f3 41 0f b6 b6 c4 02 00 00 48 c7 [ 129.374471] RSP: 0018:ffff9f9141e7fcc0 EFLAGS: 00010246 [ 129.374472] RAX: 0000000000000000 RBX: ffff91ef0762f800 RCX: 0000000000000000 [ 129.374473] RDX: 0000000000000005 RSI: ffffffffc0c4a988 RDI: 0000000000000004 [ 129.374474] RBP: ffff9f9141e7fd10 R08: 0000000000000005 R09: 0000000000000000 [ 129.374475] R10: 0000000000000002 R11: 0000000000000001 R12: ffff91eebd510c00 [ 129.374475] R13: ffff91eebd510e58 R14: ffff91ef052c01b8 R15: 0000000000000006 [ 129.374476] FS: 0000000000000000(0000) GS:ffff91ef0ef80000(0000) knlGS:0000000000000000 [ 129.374477] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 129.374478] CR2: 000055623ea01d50 CR3: 0000000408a8c000 CR4: 00000000003406e0 [ 129.374479] Call Trace: [ 129.374550] dc_link_reallocate_mst_payload+0x12e/0x150 [amdgpu] [ 129.374617] dc_link_handle_hpd_rx_irq+0x6d4/0x6e0 [amdgpu] [ 129.374693] handle_hpd_rx_irq+0x77/0x310 [amdgpu] [ 129.374768] dm_irq_work_func+0x53/0x70 [amdgpu] [ 129.374774] process_one_work+0x1fd/0x3f0 [ 129.374776] worker_thread+0x255/0x410 [ 129.374778] kthread+0x121/0x140 [ 129.374780] ? process_one_work+0x3f0/0x3f0 [ 129.374781] ? kthread_park+0x90/0x90 [ 129.374785] ret_from_fork+0x22/0x40 [How] when we disable MST we should clear the cur link settings (lane_count=0 is good enough). This will cause us to not reallocate payloads earlier than expected and not throw the warning Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-25drm/amdgpu: clean wptr on wb when gpu recoveryYintian Tao
[ Upstream commit 2ab7e274b86739f4ceed5d94b6879f2d07b2802f ] The TDR will be randomly failed due to compute ring test failure. If the compute ring wptr & 0x7ff(ring_buf_mask) is 0x100 then after map mqd the compute ring rptr will be synced with 0x100. And the ring test packet size is also 0x100. Then after invocation of amdgpu_ring_commit, the cp will not really handle the packet on the ring buffer because rptr is equal to wptr. Signed-off-by: Yintian Tao <yttao@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-25drm/exynos: hdmi: don't leak enable HDMI_EN regulator if probe failsMarek Szyprowski
[ Upstream commit 3b6a9b19ab652efac7ad4c392add6f1235019568 ] Move enabling and disabling HDMI_EN optional regulator to probe() function to keep track on the regulator status. This fixes following warning if probe() fails (for example when I2C DDC adapter cannot be yet gathered due to the missing driver). This fixes following warning observed on Arndale5250 board with multi_v7_defconfig: [drm] Failed to get ddc i2c adapter by node ------------[ cut here ]------------ WARNING: CPU: 0 PID: 214 at drivers/regulator/core.c:2051 _regulator_put+0x16c/0x184 Modules linked in: ... CPU: 0 PID: 214 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200219-00040-g38af1dfafdbb #7570 Hardware name: Samsung Exynos (Flattened Device Tree) [<c0312258>] (unwind_backtrace) from [<c030cc10>] (show_stack+0x10/0x14) [<c030cc10>] (show_stack) from [<c0f0d3a0>] (dump_stack+0xcc/0xe0) [<c0f0d3a0>] (dump_stack) from [<c0346a58>] (__warn+0xe0/0xf8) [<c0346a58>] (__warn) from [<c0346b20>] (warn_slowpath_fmt+0xb0/0xb8) [<c0346b20>] (warn_slowpath_fmt) from [<c0893f58>] (_regulator_put+0x16c/0x184) [<c0893f58>] (_regulator_put) from [<c0893f8c>] (regulator_put+0x1c/0x2c) [<c0893f8c>] (regulator_put) from [<c09b2664>] (release_nodes+0x17c/0x200) [<c09b2664>] (release_nodes) from [<c09aebe8>] (really_probe+0x10c/0x350) [<c09aebe8>] (really_probe) from [<c09aefa8>] (driver_probe_device+0x60/0x1a0) [<c09aefa8>] (driver_probe_device) from [<c09af288>] (device_driver_attach+0x58/0x60) [<c09af288>] (device_driver_attach) from [<c09af310>] (__driver_attach+0x80/0xbc) [<c09af310>] (__driver_attach) from [<c09ace34>] (bus_for_each_dev+0x68/0xb4) [<c09ace34>] (bus_for_each_dev) from [<c09ae00c>] (bus_add_driver+0x130/0x1e8) [<c09ae00c>] (bus_add_driver) from [<c09afd98>] (driver_register+0x78/0x110) [<c09afd98>] (driver_register) from [<bf139558>] (exynos_drm_init+0xe8/0x11c [exynosdrm]) [<bf139558>] (exynos_drm_init [exynosdrm]) from [<c0302fa8>] (do_one_initcall+0x50/0x220) [<c0302fa8>] (do_one_initcall) from [<c03dc02c>] (do_init_module+0x60/0x210) [<c03dc02c>] (do_init_module) from [<c03daf44>] (load_module+0x1c0c/0x2310) [<c03daf44>] (load_module) from [<c03db85c>] (sys_finit_module+0xac/0xbc) [<c03db85c>] (sys_finit_module) from [<c0301000>] (ret_fast_syscall+0x0/0x54) Exception stack(0xecca3fa8 to 0xecca3ff0) ... ---[ end trace 276c91214635905c ]--- Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-25drm/exynos: dsi: fix workaround for the legacy clock nameMarek Szyprowski
[ Upstream commit c0fd99d659ba5582e09625c7a985d63fc2ca74b5 ] Writing to the built-in strings arrays doesn't work if driver is loaded as kernel module. This is also considered as a bad pattern. Fix this by adding a call to clk_get() with legacy clock name. This fixes following kernel oops if driver is loaded as module: Unable to handle kernel paging request at virtual address bf047978 pgd = (ptrval) [bf047978] *pgd=59344811, *pte=5903c6df, *ppte=5903c65f Internal error: Oops: 80f [#1] SMP ARM Modules linked in: mc exynosdrm(+) analogix_dp rtc_s3c exynos_ppmu i2c_gpio CPU: 1 PID: 212 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200219 #326 videodev: Linux video capture interface: v2.00 Hardware name: Samsung Exynos (Flattened Device Tree) PC is at exynos_dsi_probe+0x1f0/0x384 [exynosdrm] LR is at exynos_dsi_probe+0x1dc/0x384 [exynosdrm] ... Process systemd-udevd (pid: 212, stack limit = 0x(ptrval)) ... [<bf03cf14>] (exynos_dsi_probe [exynosdrm]) from [<c09b1ca0>] (platform_drv_probe+0x6c/0xa4) [<c09b1ca0>] (platform_drv_probe) from [<c09afcb8>] (really_probe+0x210/0x350) [<c09afcb8>] (really_probe) from [<c09aff74>] (driver_probe_device+0x60/0x1a0) [<c09aff74>] (driver_probe_device) from [<c09b0254>] (device_driver_attach+0x58/0x60) [<c09b0254>] (device_driver_attach) from [<c09b02dc>] (__driver_attach+0x80/0xbc) [<c09b02dc>] (__driver_attach) from [<c09ade00>] (bus_for_each_dev+0x68/0xb4) [<c09ade00>] (bus_for_each_dev) from [<c09aefd8>] (bus_add_driver+0x130/0x1e8) [<c09aefd8>] (bus_add_driver) from [<c09b0d64>] (driver_register+0x78/0x110) [<c09b0d64>] (driver_register) from [<bf038558>] (exynos_drm_init+0xe8/0x11c [exynosdrm]) [<bf038558>] (exynos_drm_init [exynosdrm]) from [<c0302fa8>] (do_one_initcall+0x50/0x220) [<c0302fa8>] (do_one_initcall) from [<c03dd02c>] (do_init_module+0x60/0x210) [<c03dd02c>] (do_init_module) from [<c03dbf44>] (load_module+0x1c0c/0x2310) [<c03dbf44>] (load_module) from [<c03dc85c>] (sys_finit_module+0xac/0xbc) [<c03dc85c>] (sys_finit_module) from [<c0301000>] (ret_fast_syscall+0x0/0x54) Exception stack(0xd979bfa8 to 0xd979bff0) ... ---[ end trace db16efe05faab470 ]--- Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-25drm/exynos: dsi: propagate error value and silence meaningless warningMarek Szyprowski
[ Upstream commit 0a9d1e3f3f038785ebc72d53f1c409d07f6b4ff5 ] Properly propagate error value from devm_regulator_bulk_get() and don't confuse user with meaningless warning about failure in getting regulators in case of deferred probe. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-25drm/mediatek: Ensure the cursor plane is on top of other overlaysSean Paul
[ Upstream commit 26d696192aa5f4fe9119d6d23f90ed535053abca ] Currently the cursor is placed on the first overlay plane, which means it will be at the bottom of the stack when the hw does the compositing with anything other than primary plane. Since mtk doesn't support plane zpos, change the cursor location to the top-most plane. Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-25drm/mediatek: Find the cursor plane instead of hard coding itEvan Benn
[ Upstream commit 318caac7c81cdf5806df30c3d72385659a5f0f53 ] The cursor and primary planes were hard coded. Now search for them for passing to drm_crtc_init_with_planes Signed-off-by: Evan Benn <evanbenn@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-21drm/amdgpu: fix memory leak during TDR test(v2)Monk Liu
[ Upstream commit 4829f89855f1d3a3d8014e74cceab51b421503db ] fix system memory leak v2: fix coding style Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-18drm/i915/gvt: Fix unnecessary schedule timer when no vGPU exitsZhenyu Wang
commit 04d6067f1f19e70a418f92fa3170cf7fe53b7fdf upstream. From commit f25a49ab8ab9 ("drm/i915/gvt: Use vgpu_lock to protect per vgpu access") the vgpu idr destroy is moved later than vgpu resource destroy, then it would fail to stop timer for schedule policy clean which to check vgpu idr for any left vGPU. So this trys to destroy vgpu idr earlier. Cc: Colin Xu <colin.xu@intel.com> Fixes: f25a49ab8ab9 ("drm/i915/gvt: Use vgpu_lock to protect per vgpu access") Acked-by: Colin Xu <colin.xu@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200229055445.31481-1-zhenyuw@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18drm/i915/gvt: Fix dma-buf display blur issue on CFLTina Zhang
commit 259170cb4c84f4165a36c0b05811eb74c495412c upstream. Commit c3b5a8430daad ("drm/i915/gvt: Enable gfx virtualiztion for CFL") added the support on CFL. The vgpu emulation hotplug support on CFL was supposed to be included in that patch. Without the vgpu emulation hotplug support, the dma-buf based display gives us a blur face. So fix this issue by adding the vgpu emulation hotplug support on CFL. Fixes: c3b5a8430daad ("drm/i915/gvt: Enable gfx virtualiztion for CFL") Signed-off-by: Tina Zhang <tina.zhang@intel.com> Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200227010041.32248-1-tina.zhang@intel.com (cherry picked from commit 135dde8853c7e00f6002e710f7e4787ed8585c0e) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18drm/i915/execlists: Enable timeslice on partial virtual engine dequeueChris Wilson
commit eafc2aa20fba319b6e791a1b0c45a91511eccb6b upstream. If we stop filling the ELSP due to an incompatible virtual engine request, check if we should enable the timeslice on behalf of the queue. This fixes the case where we are inspecting the last->next element when we know that the last element is the last request in the execution queue, and so decided we did not need to enable timeslicing despite the intent to do so! Fixes: 8ee36e048c98 ("drm/i915/execlists: Minimalistic timeslicing") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> # v5.4+ Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200306113012.3184606-1-chris@chris-wilson.co.uk (cherry picked from commit 3df2deed411e0f1b7312baf0139aab8bba4c0410) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18drm/i915/gt: Close race between cacheline_retire and freeChris Wilson
commit 8ea6bb8e4d47e07518e5dba4f5cb77e210f0df82 upstream. If the cacheline may still be busy, atomically mark it for future release, and only if we can determine that it will never be used again, immediately free it. Closes: https://gitlab.freedesktop.org/drm/intel/issues/1392 Fixes: ebece7539242 ("drm/i915: Keep timeline HWSP allocated until idle across the system") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.2+ Link: https://patchwork.freedesktop.org/patch/msgid/20200306154647.3528345-1-chris@chris-wilson.co.uk (cherry picked from commit 2d4bd971f5baa51418625f379a69f5d58b5a0450) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18drm/i915: Defer semaphore priority bumping to a workqueueChris Wilson
commit 14a0d527a479eb2cb6067f9e5e163e1bf35db2a9 upstream. Since the semaphore fence may be signaled from inside an interrupt handler from inside a request holding its request->lock, we cannot then enter into the engine->active.lock for processing the semaphore priority bump as we may traverse our call tree and end up on another held request. CPU 0: [ 2243.218864] _raw_spin_lock_irqsave+0x9a/0xb0 [ 2243.218867] i915_schedule_bump_priority+0x49/0x80 [i915] [ 2243.218869] semaphore_notify+0x6d/0x98 [i915] [ 2243.218871] __i915_sw_fence_complete+0x61/0x420 [i915] [ 2243.218874] ? kmem_cache_free+0x211/0x290 [ 2243.218876] i915_sw_fence_complete+0x58/0x80 [i915] [ 2243.218879] dma_i915_sw_fence_wake+0x3e/0x80 [i915] [ 2243.218881] signal_irq_work+0x571/0x690 [i915] [ 2243.218883] irq_work_run_list+0xd7/0x120 [ 2243.218885] irq_work_run+0x1d/0x50 [ 2243.218887] smp_irq_work_interrupt+0x21/0x30 [ 2243.218889] irq_work_interrupt+0xf/0x20 CPU 1: [ 2242.173107] _raw_spin_lock+0x8f/0xa0 [ 2242.173110] __i915_request_submit+0x64/0x4a0 [i915] [ 2242.173112] __execlists_submission_tasklet+0x8ee/0x2120 [i915] [ 2242.173114] ? i915_sched_lookup_priolist+0x1e3/0x2b0 [i915] [ 2242.173117] execlists_submit_request+0x2e8/0x2f0 [i915] [ 2242.173119] submit_notify+0x8f/0xc0 [i915] [ 2242.173121] __i915_sw_fence_complete+0x61/0x420 [i915] [ 2242.173124] ? _raw_spin_unlock_irqrestore+0x39/0x40 [ 2242.173137] i915_sw_fence_complete+0x58/0x80 [i915] [ 2242.173140] i915_sw_fence_commit+0x16/0x20 [i915] Closes: https://gitlab.freedesktop.org/drm/intel/issues/1318 Fixes: b7404c7ecb38 ("drm/i915: Bump ready tasks ahead of busywaits") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200310101720.9944-1-chris@chris-wilson.co.uk (cherry picked from commit 209df10bb4536c81c2540df96c02cd079435357f) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18drm/i915: be more solid in checking the alignmentMatthew Auld
commit 1d61c5d711a2dc0b978ae905535edee9601f9449 upstream. The alignment is u64, and yet is_power_of_2() assumes unsigned long, which might give different results between 32b and 64b kernel. Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200305203534.210466-1-matthew.auld@intel.com Cc: stable@vger.kernel.org (cherry picked from commit 2920516b2f719546f55079bc39a7fe409d9e80ab) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18drm/i915: Return early for await_start on same timelineChris Wilson
commit c951b0af2dddbb1f34be103029eb9030392d5554 upstream. Requests within a timeline are ordered by that timeline, so awaiting for the start of a request within the timeline is a no-op. This used to work by falling out of the mutex_trylock() as the signaler and waiter had the same timeline and not returning an error. Fixes: 6a79d848403d ("drm/i915: Lock signaler timeline while navigating") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.5+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200305134822.2750496-1-chris@chris-wilson.co.uk (cherry picked from commit ab7a69020fb5d5c7ba19fba60f62fd6f9ca9f779) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18drm/i915: Actually emit the await_startChris Wilson
commit c67b35d970ed3391069c21f3071a26f687399ab2 upstream. Fix the inverted test to emit the wait on the end of the previous request if we /haven't/ already. Fixes: 6a79d848403d ("drm/i915: Lock signaler timeline while navigating") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.5+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200305104210.2619967-1-chris@chris-wilson.co.uk (cherry picked from commit 07e9c59d63df6a1c44c1975c01827ba18b69270a) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18drm/amd/display: remove duplicated assignment to grph_obj_typeColin Ian King
commit d785476c608c621b345dd9396e8b21e90375cb0e upstream. Variable grph_obj_type is being assigned twice, one of these is redundant so remove it. Addresses-Coverity: ("Evaluation order violation") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12drm/i915/perf: Reintroduce wait on OA configuration completionChris Wilson
commit 08f56f8f3799b2ed1c5ac7eed6d86a4926289655 upstream. We still need to wait for the initial OA configuration to happen before we enable OA report writes to the OA buffer. Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: 15d0ace1f876 ("drm/i915/perf: execute OA configuration from command stream") Closes: https://gitlab.freedesktop.org/drm/intel/issues/1356 Testcase: igt/perf/stream-open-close Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200302085812.4172450-7-chris@chris-wilson.co.uk (cherry picked from commit 4b4e973d5eb89244b67d3223b60f752d0479f253) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12drm/i915/selftests: Fix return in assert_mmap_offset()Dan Carpenter
commit f4aaa44e8b20f7e0d4ea68d3bca4968b6ae5aaff upstream. The assert_mmap_offset() returns type bool so if we return an error pointer that is "return true;" or success. If we have an error, then we should return false. Fixes: 3d81d589d6e3 ("drm/i915: Test exhaustion of the mmap space") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200228141413.qfjf4abr323drlo4@kili.mountain (cherry picked from commit efbf928824820f2738f41271934f6ec2c6ebd587) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12drm/i915: Program MBUS with rmw during initializationMatt Roper
commit c725161924f9a5872a3e53b73345a6026a5c170e upstream. It wasn't terribly clear from the bspec's wording, but after discussion with the hardware folks, it turns out that we need to preserve the pre-existing contents of the MBUS ABOX control register when initializing a few specific bits. Bspec: 49213 Bspec: 50096 Fixes: 4cb4585e5a7f ("drm/i915/icl: initialize MBus during display init") Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200204011032.582737-1-matthew.d.roper@intel.com Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> (cherry picked from commit 837b63e6087838d0f1e612d448405419199d8033) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200228004320.127142-1-matthew.d.roper@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12drm/sun4i: de2/de3: Remove unsupported VI layer formatsJernej Skrabec
commit a4769905f0ae32cae4f096f646ab03b8b4794c74 upstream. YUV444 and YVU444 are planar formats, but HW format RGB888 is packed. This means that those two mappings were never correct. Remove them. Fixes: 60a3dcf96aa8 ("drm/sun4i: Add DE2 definitions for YUV formats") Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-2-jernej.skrabec@siol.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12drm/sun4i: Fix DE2 VI layer format supportJernej Skrabec
commit 20896ef137340e9426cf322606f764452f5eb960 upstream. DE2 VI layer doesn't support blending which means alpha channel is ignored. Replace all formats with alpha with "don't care" (X) channel. Fixes: 7480ba4d7571 ("drm/sun4i: Add support for DE2 VI planes") Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-4-jernej.skrabec@siol.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12drm/sun4i: Add separate DE3 VI layer formatsJernej Skrabec
commit 169ca4b38932112e8b2ee8baef9cea44678625b3 upstream. DE3 VI layers support alpha blending, but DE2 VI layers do not. Additionally, DE3 VI layers support 10-bit RGB and YUV formats. Make a separate list for DE3. Fixes: c50519e6db4d ("drm/sun4i: Add basic support for DE3") Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-3-jernej.skrabec@siol.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12drm: kirin: Revert "Fix for hikey620 display offset problem"John Stultz
commit 1b79cfd99ff5127e6a143767b51694a527b3ea38 upstream. This reverts commit ff57c6513820efe945b61863cf4a51b79f18b592. With the commit ff57c6513820 ("drm: kirin: Fix for hikey620 display offset problem") we added support for handling LDI overflows by resetting the hardware. However, its been observed that when we do hit the LDI overflow condition, the irq seems to be screaming, and we do nothing but stream: [drm:ade_irq_handler [kirin_drm]] *ERROR* LDI underflow! over and over to the screen I've tried a few appraoches to avoid this, but none has yet been successful and the cure here is worse then the original disease, so revert this for now. Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Fixes: ff57c6513820 ("drm: kirin: Fix for hikey620 display offset problem") Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200303163228.52741-1-john.stultz@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12drm/ttm: fix leaking fences via ttm_buffer_object_transferAhzo
commit 8c8c06207bcfc5a7e5918fc0a0f7f7b9a2e196d6 upstream. Set the drm_device to NULL, so that the newly created buffer object doesn't appear to use the embedded gem object. This is necessary, because otherwise no corresponding dma_resv_fini for the dma_resv_init is called, resulting in a memory leak. The dma_resv_fini in ttm_bo_release_list is only called if the embedded gem object is not used, which is determined by checking if the drm_device is NULL. Bug: https://gitlab.freedesktop.org/drm/amd/issues/958 Fixes: 1e053b10ba60 ("drm/ttm: use gem reservation object") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Ahzo <Ahzo@tutanota.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/355089/ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12drm/mediatek: Handle component type MTK_DISP_OVL_2L correctlyPhong LE
commit 3d2ed431b8f39483477bc3c3a2aefbc9778ffe12 upstream. The larb device remains NULL if the type is MTK_DISP_OVL_2L. A kernel panic is raised when a crtc uses mtk_smi_larb_get or mtk_smi_larb_put. Fixes: b17bdd0d7a73 ("drm/mediatek: add component OVL_2L0") Signed-off-by: Phong LE <ple@baylibre.com> Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12drm/panfrost: Don't try to map on error faultsTomeu Vizoso
commit eb9d8ddbc107d02e489681f9dcbf93949e1a99a4 upstream. If the exception type isn't a translation fault, don't try to map and instead go straight to a terminal fault. Otherwise, we can get flooded by kernel warnings and further faults. Fixes: 187d2929206e ("drm/panfrost: Add support for GPU heap allocations") Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200212202236.13095-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12drm/virtio: fix resource id creation raceJohn Bates
commit fbb30168c7395b9cfeb9e6f7b0c0bca854a6552d upstream. The previous code was not thread safe and caused undefined behavior from spurious duplicate resource IDs. In this patch, an atomic_t is used instead. We no longer see any duplicate IDs in tests with this change. Fixes: 16065fcdd19d ("drm/virtio: do NOT reuse resource ids") Signed-off-by: John Bates <jbates@chromium.org> Reviewed-by: Chia-I Wu <olvaffe@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200220225319.45621-1-jbates@chromium.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12drm/amd/powerplay: fix pre-check condition for setting clock rangePrike Liang
commit 80381d40c9bf5218db06a7d7246c5478c95987ee upstream. This fix will handle some MP1 FW issue like as mclk dpm table in renoir has a reverse dpm clock layout and a zero frequency dpm level as following case. cat pp_dpm_mclk 0: 1200Mhz 1: 1200Mhz 2: 800Mhz 3: 0Mhz Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12drm/amdgpu: disable 3D pipe 1 on Navi1xTianci.Yin
commit 194bcf35bce4a236059816bc41b3db9c9c92a1bb upstream. [why] CP firmware decide to skip setting the state for 3D pipe 1 for Navi1x as there is no use case. [how] Disable 3D pipe 1 on Navi1x. Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12drm/shmem: add support for per object caching flags.Gerd Hoffmann
commit 1cad629257e76025bcbf490c58de550fb67d4d0e upstream. Add map_cached bool to drm_gem_shmem_object, to request cached mappings on a per-object base. Check the flag before adding writecombine to pgprot bits. Cc: stable@vger.kernel.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org> Tested-by: Guillaume Gardet <Guillaume.Gardet@arm.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200226154752.24328-2-kraxel@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12drm/virtio: fix mmap page attributesGerd Hoffmann
commit 6be7e07335486f5731cab748d80c68f20896581f upstream. virtio-gpu uses cached mappings, set drm_gem_shmem_object.map_cached accordingly. Cc: stable@vger.kernel.org Fixes: c66df701e783 ("drm/virtio: switch from ttm to gem shmem helpers") Reported-by: Gurchetan Singh <gurchetansingh@chromium.org> Reported-by: Guillaume Gardet <Guillaume.Gardet@arm.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org> Tested-by: Guillaume Gardet <Guillaume.Gardet@arm.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200226154752.24328-3-kraxel@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-25 08:18:04 +0000