| Age | Commit message (Collapse) | Author |
|---|
|
commit 2c83a726d6fbb5d130d8f2edd82a258adb675ac3 upstream.
When the hangcheck handler was replaced by the DRM scheduler timeout
handling we dropped the forward progress check, as this might allow
clients to hog the GPU for a long time with a big job.
It turns out that even reasonably well behaved clients like the
Armada Xorg driver occasionally trip over the 500ms timeout. Bring
back the forward progress check to get rid of the userspace regression.
We would still like to fix userspace to submit smaller batches
if possible, but that is for another day.
Cc: <stable@vger.kernel.org>
Fixes: 6d7a20c07760 (drm/etnaviv: replace hangcheck with scheduler timeout)
Reported-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bf6ba3aeb2962e5ee4a78e7535af579ecba630bb upstream.
Russell King reported:
"When removing and reloading the etnaviv module, the following splat
occurs:
sysfs: cannot create duplicate filename '/devices/platform/etnaviv'
CPU: 0 PID: 1471 Comm: modprobe Not tainted 4.17.0+ #1608
Hardware name: Marvell Dove (Cubox)
Backtrace:
[<c00157d4>] (dump_backtrace) from [<c0015b8c>] (show_stack+0x18/0x1c)
r6:ef033e38 r5:ee07b340 r4:edb9d000 r3:00000000
[<c0015b74>] (show_stack) from [<c0620784>] (dump_stack+0x20/0x28)
[<c0620764>] (dump_stack) from [<c01bcd24>] (sysfs_warn_dup+0x5c/0x70)
[<c01bccc8>] (sysfs_warn_dup) from [<c01bce14>] (sysfs_create_dir_ns+0x90/0x98)
..."
Commit 246774d17fc0 ("drm/etnaviv: remove the need for a gpu-subsystem
DT node") introduced DRM registration via
platform_device_register_simple(), but missed to call
platform_device_unregister() inside etnaviv_exit().
Fix the problem by calling platform_device_unregister() inside
etnaviv_exit(). While at it, also rearrange the function calls
in the exit path to make them happen in the opposite order of
registration.
Tested on a imx6-sabresd board.
Cc: <stable@vger.kernel.org>
Fixes: 246774d17fc0 ("drm/etnaviv: remove the need for a gpu-subsystem DT node")
Reported-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 45a0faaba9c8c5ba1e31a08a391aed0bad327167 upstream.
platform_device_register_simple() may fail, so we should better
check its return value and propagate it in the case of error.
Cc: <stable@vger.kernel.org>
Fixes: 246774d17fc0 ("drm/etnaviv: remove the need for a gpu-subsystem DT node")
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f9ff68521a5541e1fdaeb0ef11871c035b30e409 upstream.
The other day I was testing one of the HP laptops at my office with an
i915/amdgpu hybrid setup and noticed that hotplugging was non-functional
on almost all of the display outputs. I eventually discovered that all
of the external outputs were connected to the amdgpu device instead of
i915, and that the hotplugs weren't being detected so long as the GPU
was in runtime suspend. After some talking with folks at AMD, I learned
that amdgpu is actually supposed to support hotplug detection in runtime
suspend so long as the OEM has implemented it properly in the firmware.
On this HP ZBook 15 G4 (the machine in question), amdgpu wasn't managing
to find the ATIF handle at all despite the fact that I could see acpi
events being sent in response to any hotplugging. After going through
dumps of the firmware, I discovered that this machine did in fact
support ATIF, but that it's ATIF method lived in an entirely different
namespace than this device's handle (the device handle was
\_SB_.PCI0.PEG0.PEGP, but ATIF lives in ATPX's handle at
\_SB_.PCI0.GFX0).
So, fix this by probing ATPX's ACPI parent's namespace if we can't find
ATIF elsewhere, along with storing a pointer to the proper handle to use
for ATIF and using that instead of the device's handle.
This fixes HPD detection while in runtime suspend for this ZBook!
v2: Update the comment to reflect how the namespaces are arranged
based on the system configuration. (Alex)
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4aa5d5eb82bb237d0bb3a38b2a7555054d018081 upstream.
Since it seems that some vendors are storing the ATIF ACPI methods under
the same handle that ATPX lives under instead of the device's own
handle, we're going to need to be able to retrieve this handle later so
we can probe for ATIF there.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 99ec9e77511dea55d81729fc80b6c63a61bfa8e0 upstream.
The displaylink hardware has such a peculiarity that it doesn't render a
command until next command is received. This produces occasional
corruption, such as when setting 22x11 font on the console, only the first
line of the cursor will be blinking if the cursor is located at some
specific columns.
When we end up with a repeating pixel, the driver has a bug that it leaves
one uninitialized byte after the command (and this byte is enough to flush
the command and render it - thus it fixes the screen corruption), however
whe we end up with a non-repeating pixel, there is no byte appended and
this results in temporary screen corruption.
This patch fixes the screen corruption by always appending a byte 0xAF at
the end of URB. It also removes the uninitialized byte.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 718b5406cd76f1aa6434311241b7febf0e8571ff upstream.
The property size may be controlled by userspace, can be large (I've
seen failure with order 4, i.e. 16 pages / 64 KB) and doesn't need to be
physically contiguous.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180629142710.2069-1-michel@daenzer.net
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2cd5fe22d9a45cdf11c62bbe8db3ce9101207510 upstream.
Currently, there is nothing in amdgpu that actually uses these structs
other than amdgpu_acpi.c. Additionally, since we're about to start
saving the correct ACPI handle to use for calling ATIF in this struct
this saves us from having to handle making sure that the acpi_handle
(and by proxy, the type definition for acpi_handle and all of the other
acpi headers) doesn't need to be included within the amdgpu_drv struct
itself. This follows the example set by amdgpu_atpx_handler.c.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7a3727f385dc64773db1c144f6b15c1e9d4735bb upstream.
The SF and clipper units mishandle the provoking vertex in some cases,
which can cause misrendering with shaders that use flat shaded inputs.
There are chicken bits in 3D_CHICKEN3 (for SF) and FF_SLICE_CHICKEN
(for the clipper) that work around the issue. These registers are
unfortunately not part of the logical context (even the power context),
and so we must reload them every time we start executing in a context.
Bugzilla: https://bugs.freedesktop.org/103047
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180615190605.16238-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
(cherry picked from commit b77422f80337d363eed60c8c48db9cb6e33085c9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4dccc4d517481282e84335c7acbfd7a1481004b8 upstream.
While Bspec doesn't list a specific sequence for turning off the DP port
on g4x we are getting an underrun if the port is disabled in the
.disable() hook. Looks like the pipe stops when the port stops, and by
that time the plane disable may not have completed yet. Also the plane(s)
seem to end up in some wonky state when this happens as they also signal
another underrun immediately after we turn them back on during the next
enable sequence.
We could add a vblank wait in .disable() to avoid wedging the planes,
but I assume we're still tripping up the pipe in some way. So it seems
better to me to just follow the ILK+ sequence and turn off the DP port
in .post_disable() instead. This sequence doesn't seem to suffer from
this problem. Could be it was always the intended sequence for DP and
the gen4 bspec was just never updated to include it.
Originally we used the bad sequence even on ilk+, but I changed that
in commit 08aff3fe26ae ("drm/i915: Move DP port disable to post_disable
for pch platforms") as it was causing issues on those platforms as well.
I left out g4x then only because I didn't have the hardware to test it.
Now that I do it's fairly clear that the ilk+ sequence is also the
right choice for g4x.
v2: Fix whitespace fail (Jani)
Mention the ilk+ commit (Jani)
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180613160553.11664-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 51a9f6dfc00d35f927ecfaf6f0ae8ebaba39b3fe)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1e34f1d36804be1a446212a33ca5397bf0e5acdd upstream.
Looks like interlaced DP output doesn't work on g4x either. Not all
that surprising considering we already established that interlaced
DP output is busted on VLV/CHV.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180613160553.11664-1-ville.syrjala@linux.intel.com
(cherry picked from commit 929168c5f3df5d9ea0ef426c33e971157d045eab)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4dc055c9cc8b3dac966b54d3cd5cf463a988299b upstream.
On i965/g4x IIR is edge triggered. So in order for IIR to notice that
there is still a pending interrupt we have to force and edge in ISR.
For the ISR/IIR pipe event bits we can do that by temporarily
clearing all the PIPESTAT enable bits when we ack the status bits.
This will force the ISR pipe event bit low, and it can then go back
high when we restore the PIPESTAT enable bits.
This avoids the following race:
1. stat = read(PIPESTAT)
2. an enabled PIPESTAT status bit goes high
3. write(PIPESTAT, enable|stat);
4. write(IIR, PIPE_EVENT)
The end result is IIR==0 and ISR!=0. This can lead to nasty
vblank wait/flip_done timeouts if another interrupt source
doesn't trick us into looking at the PIPESTAT status bits despite
the IIR PIPE_EVENT bit being low.
Before i965 IIR was level triggered so this problem can't actually
happen there. And curiously VLV/CHV went back to the level triggered
scheme as well. But for simplicity we'll use the same i965/g4x
compatible code for all platforms.
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106033
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105225
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106030
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180611200258.27121-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 132c27c97cb958f637dc05adc35a61b47779bcd8)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 541ab84d2b6ea79021d5df0b54d81600334fa2a4 upstream.
When encountering a connector with the scaling mode property both
intel and modesetting ddxs sometimes add tons of DBLSCAN modes
to the output's mode list. The idea presumably being that since the
output will be going through the panel fitter anyway we can pretend
to use any kind of mode.
Sadly that means we can't reject user modes with the DBLSCAN flag
until we know whether we're going to be using the panel's native
mode or the user mode directly. Doing otherwise means X clients using
xf86vidmode/xrandr will get a protocol error (and often self
terminate as a result) when the kernel refuses to use the requested
mode with the DBLSCAN flag.
To undo the regression we'll move the DBLSCAN checks into the
connector->mode_valid() and encoder->compute_config() hooks.
Cc: stable@vger.kernel.org
Cc: Vito Caputo <vcaputo@pengaru.com>
Reported-by: Vito Caputo <vcaputo@pengaru.com>
Fixes: e995ca0b8139 ("drm/i915: Provide a device level .mode_valid() hook")
References: https://lkml.org/lkml/2018/5/21/715
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180524125403.23445-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106804
Tested-by: Arkadiusz Miskiewicz <arekm@maven.pl>
(cherry picked from commit e4dd27aadd205417a2e9ea9902b698a0252ec3a0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4de9f38bb2cce3a4821ffb8a83d6b08f6e37d905 upstream.
Currently, amdgpu_do_flip() spinlocks crtc->dev->event_lock and
releases it only after committing updates to the stream.
dc_commit_updates_for_stream() should be moved out of
spinlock for the below reasons:
1. event_lock is supposed to protect access to acrct->pflip_status _only_
2. dc_commit_updates_for_stream() has potential sleep's
and also its not appropriate to be in an atomic state
for such long sequences of code.
Signed-off-by: Shirish S <shirish.s@amd.com>
Suggested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fe2a19652918a5247418aed48a247414a5e45fe2 upstream.
This fixes a regression I accidentally reduced that was picked up by
kasan, where we were checking the CRTC atomic states after DRM's helpers
had already freed them. Example:
==================================================================
BUG: KASAN: use-after-free in amdgpu_dm_atomic_commit_tail.cold.50+0x13d/0x15a [amdgpu]
Read of size 1 at addr ffff8803a697b071 by task kworker/u16:0/7
CPU: 7 PID: 7 Comm: kworker/u16:0 Tainted: G O 4.18.0-rc1Lyude-Upstream+ #1
Hardware name: HP HP ZBook 15 G4/8275, BIOS P70 Ver. 01.21 05/02/2018
Workqueue: events_unbound commit_work [drm_kms_helper]
Call Trace:
dump_stack+0xc1/0x169
? dump_stack_print_info.cold.1+0x42/0x42
? kmsg_dump_rewind_nolock+0xd9/0xd9
? printk+0x9f/0xc5
? amdgpu_dm_atomic_commit_tail.cold.50+0x13d/0x15a [amdgpu]
print_address_description+0x6c/0x23c
? amdgpu_dm_atomic_commit_tail.cold.50+0x13d/0x15a [amdgpu]
kasan_report.cold.6+0x241/0x2fd
amdgpu_dm_atomic_commit_tail.cold.50+0x13d/0x15a [amdgpu]
? commit_planes_to_stream.constprop.45+0x13b0/0x13b0 [amdgpu]
? cpu_load_update_active+0x290/0x290
? finish_task_switch+0x2bd/0x840
? __switch_to_asm+0x34/0x70
? read_word_at_a_time+0xe/0x20
? strscpy+0x14b/0x460
? drm_atomic_helper_wait_for_dependencies+0x47d/0x7e0 [drm_kms_helper]
commit_tail+0x96/0xe0 [drm_kms_helper]
process_one_work+0x88a/0x1360
? create_worker+0x540/0x540
? __sched_text_start+0x8/0x8
? move_queued_task+0x760/0x760
? call_rcu_sched+0x20/0x20
? vsnprintf+0xcda/0x1350
? wait_woken+0x1c0/0x1c0
? mutex_unlock+0x1d/0x40
? init_timer_key+0x190/0x230
? schedule+0xea/0x390
? __schedule+0x1ea0/0x1ea0
? need_to_create_worker+0xe4/0x210
? init_worker_pool+0x700/0x700
? try_to_del_timer_sync+0xbf/0x110
? del_timer+0x120/0x120
? __mutex_lock_slowpath+0x10/0x10
worker_thread+0x196/0x11f0
? flush_rcu_work+0x50/0x50
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x40/0x70
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x40/0x70
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x40/0x70
? __schedule+0x7d6/0x1ea0
? migrate_swap_stop+0x850/0x880
? __sched_text_start+0x8/0x8
? save_stack+0x8c/0xb0
? kasan_kmalloc+0xbf/0xe0
? kmem_cache_alloc_trace+0xe4/0x190
? kthread+0x98/0x390
? ret_from_fork+0x35/0x40
? ret_from_fork+0x35/0x40
? deactivate_slab.isra.67+0x3c4/0x5c0
? kthread+0x98/0x390
? kthread+0x98/0x390
? set_track+0x76/0x120
? schedule+0xea/0x390
? __schedule+0x1ea0/0x1ea0
? wait_woken+0x1c0/0x1c0
? kasan_unpoison_shadow+0x30/0x40
? parse_args.cold.15+0x17a/0x17a
? flush_rcu_work+0x50/0x50
kthread+0x2d4/0x390
? kthread_create_worker_on_cpu+0xc0/0xc0
ret_from_fork+0x35/0x40
Allocated by task 1124:
kasan_kmalloc+0xbf/0xe0
kmem_cache_alloc_trace+0xe4/0x190
dm_crtc_duplicate_state+0x78/0x130 [amdgpu]
drm_atomic_get_crtc_state+0x147/0x410 [drm]
page_flip_common+0x57/0x230 [drm_kms_helper]
drm_atomic_helper_page_flip+0xa6/0x110 [drm_kms_helper]
drm_mode_page_flip_ioctl+0xc4b/0x10a0 [drm]
drm_ioctl_kernel+0x1d4/0x260 [drm]
drm_ioctl+0x433/0x920 [drm]
amdgpu_drm_ioctl+0x11d/0x290 [amdgpu]
do_vfs_ioctl+0x1a1/0x13d0
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x6f/0xb0
do_syscall_64+0x147/0x440
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 1124:
__kasan_slab_free+0x12e/0x180
kfree+0x92/0x1a0
drm_atomic_state_default_clear+0x315/0xc40 [drm]
__drm_atomic_state_free+0x35/0xd0 [drm]
drm_atomic_helper_update_plane+0xac/0x350 [drm_kms_helper]
__setplane_internal+0x2d6/0x840 [drm]
drm_mode_cursor_universal+0x41e/0xbe0 [drm]
drm_mode_cursor_common+0x49f/0x880 [drm]
drm_mode_cursor_ioctl+0xd8/0x130 [drm]
drm_ioctl_kernel+0x1d4/0x260 [drm]
drm_ioctl+0x433/0x920 [drm]
amdgpu_drm_ioctl+0x11d/0x290 [amdgpu]
do_vfs_ioctl+0x1a1/0x13d0
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x6f/0xb0
do_syscall_64+0x147/0x440
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at ffff8803a697b068
which belongs to the cache kmalloc-1024 of size 1024
The buggy address is located 9 bytes inside of
1024-byte region [ffff8803a697b068, ffff8803a697b468)
The buggy address belongs to the page:
page:ffffea000e9a5e00 count:1 mapcount:0 mapping:ffff88041e00efc0 index:0x0 compound_mapcount: 0
flags: 0x8000000000008100(slab|head)
raw: 8000000000008100 ffffea000ecbc208 ffff88041e000c70 ffff88041e00efc0
raw: 0000000000000000 0000000000170017 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8803a697af00: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8803a697af80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8803a697b000: fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb
^
ffff8803a697b080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8803a697b100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
So, we fix this by counting the number of CRTCs this atomic commit disabled
early on in the function before their atomic states have been freed, then use
that count later to do the appropriate number of RPM puts at the end of the
function.
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Fixes: 97028037a38ae ("drm/amdgpu: Grab/put runtime PM references in atomic_commit_tail()")
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Michel Dänzer <michel@daenzer.net>
Reported-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 38e624a18f9a05b8c894409be6b14709a7206c7c upstream.
start / last / max_entries are numbers of GPU pages, pfn / count are
numbers of CPU pages. Convert between them accordingly.
Fixes badness on systems with > 4K page size.
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/106258
Reported-by: Matt Corallo <freedesktop@bluematt.me>
Tested-by: foxbat@ruin.net
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 34d6d59986abb1d2cb5415a49b6c50f51ba1d2e4 upstream.
At least in theory, ttm_bo_validate may move the BO, in which case the
pin_size accounting would be inconsistent with when the BO was pinned.
Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7303b39e46b2f523334591f05fd9566cf929eb26 upstream.
Even BOs with AMDGPU_GEM_CREATE_NO_CPU_ACCESS may end up at least
partially in CPU visible VRAM, in particular when all VRAM is visible.
v2:
* Don't take VRAM mgr spinlock, not needed (Christian König)
* Make loop logic simpler and clearer.
Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5e9244ff585239630f15f8ad8e676bc91a94ca9e upstream.
Preparation for the following fix, no functional change intended.
Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6fa39bc1e01dab8b4f54b23e95a181a2ed5a2d38 upstream.
It can be quite big, and there's no need for it to be physically
contiguous. This is less likely to fail under memory pressure (has
actually happened while running piglit).
Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d9fda248046ac035f18a6e663f2f9245b4bf9470 upstream.
We've had a number of users report failures to detect and light up
display with DC with LVDS and VGA. These connector types are not
currently supported with DC. I'd like to add support but unfortunately
don't have a system with LVDS or VGA available.
In order not to cause regressions we should probably fallback to the
non-DC driver for ASICs that support VGA and LVDS.
These ASICs are:
* Bonaire
* Kabini
* Kaveri
* Mullins
ASIC support can always be force enabled with amdgpu.dc=1
v2: Keep Hawaii on DC
v3: Added Mullins to the list
Cc: stable@vger.kernel.org
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 58b3d02f066e5b1480d80bd308c545526eea3250 upstream.
This reverts commit 2c17a4368aad2b88b68e4390c819e226cf320f70.
The offending commit triggers a run-time fault when accessing the panel
element of the sun4i_tcon structure when no such panel is attached.
It was apparently assumed in said commit that a panel is always used with
the TCON. Although it is often the case, this is not always true.
For instance a bridge might be used instead of a panel.
This issue was discovered using an A13-OLinuXino, that uses the TCON
in RGB mode for a simple DAC-based VGA bridge.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180613081647.31183-1-paul.kocialkowski@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9fcf2b3c1c0276650fea537c71b513d27d929b05 upstream.
The statement always evaluates to true since the struct fields
are arrays. This has shown up as a warning when compiling with
clang:
warning: address of array 'desc->layout.xstride' will always
evaluate to 'true' [-Wpointer-bool-conversion]
Check for values in the first plane instead.
Fixes: 1a396789f65a ("drm: add Atmel HLCDC Display Controller support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180617084826.31885-1-stefan@agner.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 889ad63d41eea20184b0483e7e585e5b20fb6cfe upstream.
"qxl_bo_unref" may sleep, but calling "qxl_release_map" causes
"preempt_disable()" to be called and "preempt_enable()" isn't called
until "qxl_release_unmap" is used. Move the call to "qxl_bo_unref" out
from in between the two to avoid sleeping from an atomic context.
This issue can be demonstrated on a kernel with CONFIG_LOCKDEP=y by
creating a VM using QXL, using a desktop environment using Xorg, then
moving the cursor on or off a window.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1571128
Fixes: 9428088c90b6 ("drm/qxl: reapply cursor after resetting primary")
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180601200532.13619-1-jcline@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit be1c63c8017bb00a4041abace6cc1e9f0bf26aa9 upstream.
When doing a modeset where the sink is transitioning from D3 to D0 , it
would sometimes be possible for the initial power_up_phy() to start
timing out. This would only be observed in the last action before the
sink went into D3 mode was intel_dp_sink_dpms(DRM_MODE_DPMS_OFF). We
originally thought this might be an issue with us accidentally shutting
off the aux block when putting the sink into D3, but since the DP spec
mandates that sinks must wake up within 1ms while we have 100ms to
respond to an ESI irq, this didn't really add up. Turns out that the
problem is more subtle then that:
It turns out that the timeout is from us not enabling DPMS on the MST
hub before actually trying to initiate sideband communications. This
would cause the first sideband communication (power_up_phy()), to start
timing out because the sink wasn't ready to respond. Afterwards, we
would call intel_dp_sink_dpms(DRM_MODE_DPMS_ON) in
intel_ddi_pre_enable_dp(), which would actually result in waking up the
sink so that sideband requests would work again.
Since DPMS is what lets us actually bring the hub up into a state where
sideband communications become functional again, we just need to make
sure to enable DPMS on the display before attempting to perform sideband
communications.
Changes since v1:
- Remove comment above if (!intel_dp->is_mst) - vsryjala
- Move intel_dp_sink_dpms() for MST into intel_dp_post_disable_mst() to
keep enable/disable paths symmetrical
- Improve commit message - dhnkrn
Changes since v2:
- Only send DPMS off when we're disabling the last sink, and only send
DPMS on when we're enabling the first sink - dhnkrn
Changes since v3:
- Check against is_mst, not intel_dp->is_mst - dhnkrn/vsyrjala
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: stable@vger.kernel.org
Fixes: ad260ab32a4d9 ("drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.")
Link: https://patchwork.freedesktop.org/patch/msgid/20180407011053.22437-1-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5326c4525d1b2d5f1519268dd305e19c9bd4ef56 upstream.
Clear connector's edid pointer on coonnector update, when unplugging
the display.
Fix poison EDID when hotplugging on previously used connector.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c9fea6f4379c72b7c59e1efceab09a35bc7eac43 upstream.
Commit cc6b741c6f63 ("drm: sti: remove useless fields from vtg
structure") reworked some code inside of this driver and made it select
CONFIG_OF. This results in the entire OF layer being enabled when
building an allmodconfig on ia64. OF on ia64 is completely unsupported
so this isn't a great state of affairs.
The 0day robot noticed a link-time failure on ia64 caused by
using of_node_to_nid() in an otherwise unrelated driver. The
generic fallback for of_node_to_nid() only exists when:
defined(CONFIG_OF) && defined(CONFIG_NUMA) == false
Since CONFIG_NUMA is usually selected for IA64 we get the link failure.
Fix this by making the driver depend on OF rather than selecting it,
odds are that was the original intent.
Link: https://lists.01.org/pipermail/kbuild-all/2018-March/045172.html
Fixes: cc6b741c6f63 ("drm: sti: remove useless fields from vtg structure")
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-ia64@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180403053401.30045-1-oohall@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 387f49e5467244b7bcb4cad0946a5d0fcade5f92 upstream.
v2: assign bo_va as well
We need to put the lose ends on the invalid list because it is possible
that we need to split up huge pages for them.
Cc: stable@vger.kernel.org
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> (v2)
Reviewed-by: David Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 97028037a38ae40c0e06789b71038d3a6045a413 upstream.
So, unfortunately I recently made the discovery that in the upstream
kernel, the only reason that amdgpu is not currently suffering from
issues with runtime PM putting the GPU into suspend while it's driving
displays is due to the fact that on most prime systems, we have sound
devices associated with the GPU that hold their own runtime PM ref for
the GPU.
What this means however, is that in the event that there isn't any kind
of sound device active (which can easily be reproduced by building a
kernel with sound drivers disabled), the GPU will fall asleep even when
there's displays active. This appears to be in part due to the fact that
amdgpu has not actually ever relied on it's rpm_idle() function to be
the only thing keeping it running, and normally grabs it's own power
references whenever there are displays active (as can be seen with the
original pre-DC codepath in amdgpu_display_crtc_set_config() in
amdgpu_display.c). This means it's very likely that this bug was
introduced during the switch over the DC.
So to fix this, we start grabbing runtime PM references every time we
enable a previously disabled CRTC in atomic_commit_tail(). This appears
to be the correct solution, as it matches up with what i915 does in
i915/intel_runtime_pm.c.
The one sideaffect of this is that we ignore the variable that the
pre-DC code used to use for tracking when it needed runtime PM refs,
adev->have_disp_power_ref. This is mainly because there's no way for a
driver to tell whether or not all of it's CRTCs are enabled or disabled
when we've begun committing an atomic state, as there may be CRTC
commits happening in parallel that aren't contained within the atomic
state being committed. So, it's safer to just get/put a reference for
each CRTC being enabled or disabled in the new atomic state.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a0b2ac29415bb44d1c212184c1385a1abe68db5c upstream.
It missed vcn.fw_version setting when init vcn microcode, and it will be used to
report vcn ucode version via amdgpu_firmware_info sysfs interface.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 08ebb6e9f4fd7098c28e0ebbb42847cf0488ebb8 upstream.
1. fix set vce clocks failed on Cz/St
which lead 1s delay when boot up.
2. remove the workaround in vce_v3_0.c
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 819a23f83e3b2513cffbef418458a47ca02c36b3 upstream.
fix the issue set uvd clock failed on CZ/ST
which lead 1s delay when boot up.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This fixes issues where color management properties don't persist
over DPMS on/off, or when the CRTC is moved across connectors.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When the underscan state was changed, atomic-check was triggering a
validation but passing the old underscan values. This change adds a
somewhat hacky check in dm_update_crtcs_state that will update the
stream if old and newunderscan values are different.
This was causing 4k on Fiji to allow underscan when it wasn't permitted.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
dw-hdmi: Fix Oops regression from rc1 (Neil)
Cc: Neil Armstrong <narmstrong@baylibre.com>
* tag 'drm-misc-fixes-2018-05-30' of git://anongit.freedesktop.org/drm/drm-misc:
drm/bridge/synopsys: dw-hdmi: fix dw_hdmi_setup_rx_sense
|
|
The dw_hdmi_setup_rx_sense exported function should not use struct device
to recover the dw-hdmi context using drvdata, but take struct dw_hdmi
directly like other exported functions.
This caused a regression using Meson DRM on S905X since v4.17-rc1 :
Internal error: Oops: 96000007 [#1] PREEMPT SMP
[...]
CPU: 0 PID: 124 Comm: irq/32-dw_hdmi_ Not tainted 4.17.0-rc7 #2
Hardware name: Libre Technology CC (DT)
[...]
pc : osq_lock+0x54/0x188
lr : __mutex_lock.isra.0+0x74/0x530
[...]
Process irq/32-dw_hdmi_ (pid: 124, stack limit = 0x00000000adf418cb)
Call trace:
osq_lock+0x54/0x188
__mutex_lock_slowpath+0x10/0x18
mutex_lock+0x30/0x38
__dw_hdmi_setup_rx_sense+0x28/0x98
dw_hdmi_setup_rx_sense+0x10/0x18
dw_hdmi_top_thread_irq+0x2c/0x50
irq_thread_fn+0x28/0x68
irq_thread+0x10c/0x1a0
kthread+0x128/0x130
ret_from_fork+0x10/0x18
Code: 34000964 d00050a2 51000484 9135c042 (f864d844)
---[ end trace 945641e1fbbc07da ]---
note: irq/32-dw_hdmi_[124] exited with preempt_count 1
genirq: exiting task "irq/32-dw_hdmi_" (124) is an active IRQ thread (irq 32)
Fixes: eea034af90c6 ("drm/bridge/synopsys: dw-hdmi: don't clobber drvdata")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1527673438-20643-1-git-send-email-narmstrong@baylibre.com
|
|
into drm-fixes
One last fix for 4.17. Fix a suspend regression in DC.
* 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/display: Fix BUG_ON during CRTC atomic check update
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
core: Add 220us psr setup time (Dhinakaran)
omap: Fix NULL deref (Tomi)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
* tag 'drm-misc-fixes-2018-05-29' of git://anongit.freedesktop.org/drm/drm-misc:
drm/omap: fix NULL deref crash with SDI displays
drm/psr: Fix missed entry in PSR setup time table.
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix for potential Spectre vector in the new query uAPI
- Fix NULL pointer deref (FDO #106559)
- DMI fix to hide LVDS for Radiant P845 (FDO #105468)
* tag 'drm-intel-fixes-2018-05-29' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915/query: nospec expects no more than an unsigned long
drm/i915/query: Protect tainted function pointer lookup
drm/i915/lvds: Move acpi lid notification registration to registration phase
drm/i915: Disable LVDS on Radiant P845
|
|
For cases where the CRTC is inactive (DPMS off), where a modeset is not
required, yet the CRTC is still in the atomic state, we should not
attempt to update anything on it.
Previously, we were relying on the modereset_required() helper to check
the above condition. However, the function returns false immediately if
a modeset is not required, ignoring the CRTC's enable/active state
flags. The correct way to filter is by looking at these flags instead.
Fixes: e277adc5a06c "drm/amd/display: Hookup color management functions"
Bugzilla: https://bugs.freedesktop.org/106194
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
nospec quite reasonably asserts that it will never be used with an index
larger than unsigned long (that being the largest possibly index into an
C array). However, our ubi uses the convention of u64 for any large
integer, running afoul of the assertion on 32b. Reduce our index to an
unsigned long, checking for type overflow first.
drivers/gpu/drm/i915/i915_query.c: In function 'i915_query_ioctl':
include/linux/compiler.h:339:38: error: call to '__compiletime_assert_119' declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long)
Reported-by: kbuild-all@01.org
Fixes: 84b510e22da7 ("drm/i915/query: Protect tainted function pointer lookup")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180522121018.15199-1-chris@chris-wilson.co.uk
(cherry picked from commit a33b1dc8a732144e11cb4bf067d24ba51e6b8ab0)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Smatch identifies i915_query_ioctl() as being a potential victim of
Spectre due to its use of a tainted user index into a function pointer
array. Use array_index_nospec() to defang the user index before using it
to lookup the function pointer.
Fixes: a446ae2c6e65 ("drm/i915: add query uAPI")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180521210530.26008-1-chris@chris-wilson.co.uk
(cherry picked from commit 84b510e22da7926522a257cfe295d3695346a0bd)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Delay registering ourselves with the acpi lid notification mechanism
until we are registering the connectors after initialisation is
complete. This prevents a possibility of trying to handle the lid
notification before we are ready with the danger of chasing
uninitialised function pointers.
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
IP: (null)
PGD 0 P4D 0
Oops: 0010 [#1] PREEMPT SMP PTI
Modules linked in: arc4(+) iwldvm(+) i915(+) mac80211 i2c_algo_bit coretemp mei_wdt iwlwifi drm_kms_helper kvm_intel wmi_bmof iTCO_wdt iTCO_vendor_support kvm snd_hda_codec_conexant snd_hda_codec_generic drm psmouse cfg80211 irqbypass input_leds pcspkr i2c_i801 snd_hda_intel snd_hda_codec thinkpad_acpi snd_hda_core mei_me lpc_ich snd_hwdep e1000e wmi nvram snd_pcm mei snd_timer shpchp ptp pps_core rfkill syscopyarea snd intel_agp sysfillrect intel_gtt soundcore sysimgblt battery led_class fb_sys_fops ac rtc_cmos agpgart evdev mac_hid acpi_cpufreq ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 fscrypto crypto_simd glue_helper cryptd aes_x86_64 xts algif_skcipher af_alg dm_crypt dm_mod sd_mod uas usb_storage serio_raw atkbd libps2 ahci libahci uhci_hcd libata scsi_mod ehci_pci
ehci_hcd usbcore usb_common i8042 serio
CPU: 1 PID: 378 Comm: systemd-logind Not tainted 4.16.8-1-ARCH #1
Hardware name: LENOVO 7454CTO/7454CTO, BIOS 6DET72WW (3.22 ) 10/25/2012
RIP: 0010: (null)
RSP: 0018:ffffaf4580c33a18 EFLAGS: 00010287
RAX: 0000000000000000 RBX: ffff947533558000 RCX: 000000000000003e
RDX: ffffffffc0aa80c0 RSI: ffffaf4580c33a3c RDI: ffff947534e4c000
RBP: ffff947533558338 R08: ffff947534598930 R09: ffffffffc0a928b1
R10: ffffd8f181d5fd40 R11: 0000000000000000 R12: ffffffffc0a928b1
R13: ffff947533558368 R14: ffffffffc0a928a9 R15: ffff947534e4c000
FS: 00007f3dc4ddb940(0000) GS:ffff947539280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000006e214000 CR4: 00000000000406e0
Call Trace:
? intel_modeset_setup_hw_state+0x385/0xf60 [i915]
? __intel_display_resume+0x1e/0xc0 [i915]
? intel_display_resume+0xcc/0x120 [i915]
? intel_lid_notify+0xbc/0xc0 [i915]
? notifier_call_chain+0x47/0x70
? blocking_notifier_call_chain+0x3e/0x60
? acpi_lid_notify_state+0x8f/0x1d0
? acpi_lid_update_state+0x49/0x70
? acpi_lid_input_open+0x60/0x90
? input_open_device+0x5d/0xa0
? evdev_open+0x1ba/0x1e0 [evdev]
? chrdev_open+0xa3/0x1b0
? cdev_put.part.0+0x20/0x20
? do_dentry_open+0x14c/0x300
? path_openat+0x30c/0x1240
? current_time+0x16/0x60
? do_filp_open+0x93/0x100
? __check_object_size+0xfb/0x180
? do_sys_open+0x186/0x210
? do_syscall_64+0x74/0x190
? entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Code: Bad RIP value.
RIP: (null) RSP: ffffaf4580c33a18
CR2: 0000000000000000
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106559
Fixes: c1c7af608920 ("drm/i915: force mode set at lid open time")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180518074840.16194-1-chris@chris-wilson.co.uk
Cc: stable@vger.kernel.org
(cherry picked from commit e578a570dc7c20475774d1ff993825e3bd7a7011)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Radiant P845 does not have LVDS, only VGA.
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105468
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180309222204.4771-1-linux@rainbow-software.org
(cherry picked from commit 7f7105f99b75aca4f8c2a748ed6b82c7f8be3293)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
git://people.freedesktop.org/~thomash/linux into drm-fixes
Three fixes for vmwgfx. Two are cc'd stable and fix host logging and its
error paths on 32-bit VMs. One is a fix for a hibernate flaw
introduced with the 4.17 merge window.
* 'vmwgfx-fixes-4.17' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Schedule an fb dirty update after resume
drm/vmwgfx: Fix host logging / guestinfo reading error paths
drm/vmwgfx: Fix 32-bit VMW_PORT_HB_[IN|OUT] macros
|
|
Fix a NULL deref bug introduced in commit 24aac6011f70 ("drm: omapdrm:
sdi: Allocate the sdi private data structure dynamically").
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2f803bfc-3ffe-332a-7b9a-d59a39db4630@ti.com
Fixes: 24aac6011f70 ("drm: omapdrm: sdi: Allocate the sdi private data structure dynamically")
Reported-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
|
|
Entry corresponding to 220 us setup time was missing. I am not aware of
any specific bug this fixes, but this could potentially result in enabling
PSR on a panel with a higher setup time requirement than supported by the
hardware.
I verified the value is present in eDP spec versions 1.3, 1.4 and 1.4a.
Fixes: 6608804b3d7f ("drm/dp: Add drm_dp_psr_setup_time()")
Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Tarun Vyas <tarun.vyas@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511195145.3829-3-dhinakaran.pandiyan@intel.com
|
|
We have had problems displaying fbdev after a resume and as a
workaround we have had to call vmw_fb_refresh(). This has had
a number of unwanted side-effects. The root of the problem was,
however that the coalesced fbdev dirty region was not empty on
the first dirty_mark() after a resume, so a flush was never
scheduled.
Fix this by force scheduling an fbdev flush after resume, and
remove the workaround.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
|
|
The error paths were leaking opened channels.
Fix by using dedicated error paths.
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
|
|
Depending on whether the kernel is compiled with frame-pointer or not,
the temporary memory location used for the bp parameter in these macros
is referenced relative to the stack pointer or the frame pointer.
Hence we can never reference that parameter when we've modified either
the stack pointer or the frame pointer, because then the compiler would
generate an incorrect stack reference.
Fix this by pushing the temporary memory parameter on a known location on
the stack before modifying the stack- and frame pointers.
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
|
