summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2016-09-15drm/vc4: Fix oops when userspace hands in a bad BO.Eric Anholt
commit 552416c146fadc67cd9b53ef7adf88d3381c43a6 upstream. We'd end up NULL pointer dereferencing because we didn't take the error path out in the parent. Fixes igt vc4_lookup_fail test. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: d5b1a78a772f ("drm/vc4: Add support for drawing 3D frames.") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15drm/vc4: Fix overflow mem unreferencing when the binner runs dry.Eric Anholt
commit 9326e6f25574bbb8bd48206d245654780e3fd665 upstream. Overflow memory handling is tricky: While it's still referenced by the BPO registers, we want to keep it from being freed. When we are putting a new set of overflow memory in the registers, we need to assign the old one to the last rendering job using it. We were looking at "what's currently running in the binner", but since the bin/render submission split, we may end up with the binner completing and having no new job while the renderer is still processing. So, if we don't find a bin job at all, look at the highest-seqno (last) render job to attach our overflow to. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: ca26d28bbaa3 ("drm/vc4: improve throughput by pipelining binning and rendering jobs") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15drm/vc4: Use drm_free_large() on handles to match its allocation.Eric Anholt
commit d5fb46e0e3b7e49ee83ba92efc3ab4e1a545ecc1 upstream. If you managed to exceed the limit to switch to vmalloc, we'd use the wrong free. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: d5b1a78a772f ("drm/vc4: Add support for drawing 3D frames.") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15drm/msm: fix use of copy_from_user() while holding spinlockRob Clark
commit 89f82cbb0d5c0ab768c8d02914188aa2211cd2e3 upstream. Use instead __copy_from_user_inatomic() and fallback to slow-path where we drop and re-aquire the lock in case of fault. Reported-by: Vaishali Thakkar <vaishali.thakkar@oracle.com> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15drm: Reject page_flip for !DRIVER_MODESETDaniel Vetter
commit 6f00975c619064a18c23fd3aced325ae165a73b9 upstream. Somehow this one slipped through, which means drivers without modeset support can be oopsed (since those also don't call drm_mode_config_init, which means the crtc lookup will chase an uninitalized idr). Reported-by: Alexander Potapenko <glider@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15drm/atomic: Don't potentially reset color_mgmt_changed on successive ↵Mario Kleiner
property updates. commit add1fa75101263ab4d74240f93000998d4325624 upstream. Due to assigning the 'replaced' value instead of or'ing it, if drm_atomic_crtc_set_property() gets called multiple times, the last call will define the color_mgmt_changed flag, so a non-updating call to a property can reset the flag and prevent actual hw state updates required by preceding property updates. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15drm/radeon: only apply the SS fractional workaround to RS[78]80Christian König
commit ae5b80d2b68eac945b124227dea34462118a6f01 upstream. Looks like some RV6xx have problems with that. bug: https://bugs.freedesktop.org/show_bug.cgi?id=97099 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15drm/radeon: fix radeon_move_blit on 32bit systemsChristian König
commit 13f479b9df4e2bbf2d16e7e1b02f3f55f70e2455 upstream. This bug seems to be present for a very long time. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07drm/i915: Enable polling when we don't have hpdLyude
commit 84c8e0963da434d37355079b568465cd121af295 upstream. Unfortunately, there's two situations where we lose hpd right now: - Runtime suspend - When we've shut off all of the power wells on Valleyview/Cherryview While it would be nice if this didn't cause issues, this has the ability to get us in some awkward states where a user won't be able to get their display to turn on. For instance; if we boot a Valleyview system without any monitors connected, it won't need any of it's power wells and thus shut them off. Since this causes us to lose HPD, this means that unless the user knows how to ssh into their machine and do a manual reprobe for monitors, none of the monitors they connect after booting will actually work. Eventually we should come up with a better fix then having to enable polling for this, since this makes rpm a lot less useful, but for now the infrastructure in i915 just isn't there yet to get hpd in these situations. Changes since v1: - Add comment explaining the addition of the if (!mode_config->poll_running) in intel_hpd_init() - Remove unneeded if (!dev->mode_config.poll_enabled) in i915_hpd_poll_init_work() - Call to drm_helper_hpd_irq_event() after we disable polling - Add cancel_work_sync() call to intel_hpd_cancel_work() Changes since v2: - Apparently dev->mode_config.poll_running doesn't actually reflect whether or not a poll is currently in progress, and is actually used for dynamic module paramter enabling/disabling. So now we instead keep track of our own poll_running variable in dev_priv->hotplug - Clean i915_hpd_poll_init_work() a little bit Changes since v3: - Remove the now-redundant connector loop in intel_hpd_init(), just rely on intel_hpd_poll_enable() for setting connector->polled correctly on each connector - Get rid of poll_running - Don't assign enabled in i915_hpd_poll_init_work before we actually lock dev->mode_config.mutex - Wrap enabled assignment in i915_hpd_poll_init_work() in READ_ONCE() for doc purposes - Do the same for dev_priv->hotplug.poll_enabled with WRITE_ONCE in intel_hpd_poll_enable() - Add some comments about racing not mattering in intel_hpd_poll_enable Changes since v4: - Rename intel_hpd_poll_enable() to intel_hpd_poll_init() - Drop the bool argument from intel_hpd_poll_init() - Remove redundant calls to intel_hpd_poll_init() - Rename poll_enable_work to poll_init_work - Add some kerneldoc for intel_hpd_poll_init() - Cross-reference intel_hpd_poll_init() in intel_hpd_init() - Just copy the loop from intel_hpd_init() in intel_hpd_poll_init() Changes since v5: - Minor kerneldoc nitpicks Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Lyude <cpaul@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit 19625e85c6ec56038368aa72c44f5f55b221f0fc) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07drm/i915/vlv: Disable HPD in valleyview_crt_detect_hotplug()Lyude
commit 21842ea84f161ae37ba25f0250c377fd19c5b307 upstream. One of the things preventing us from using polling is the fact that calling valleyview_crt_detect_hotplug() when there's a VGA cable connected results in sending another hotplug. With polling enabled when HPD is disabled, this results in a scenario like this: - We enable power wells and reset the ADPA - output_poll_exec does force probe on VGA, triggering a hpd - HPD handler waits for poll to unlock dev->mode_config.mutex - output_poll_exec shuts off the ADPA, unlocks dev->mode_config.mutex - HPD handler runs, resets ADPA and brings us back to the start This results in an endless irq storm getting sent from the ADPA whenever a VGA connector gets detected in the middle of polling. Somewhat based off of the "drm/i915: Disable CRT HPD around force trigger" patch Ville Syrjälä sent a while back Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Lyude <cpaul@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit b236d7c8421969ac0693fc571e47ee5c2a62fb90) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07drm/i915/vlv: Reset the ADPA in vlv_display_power_well_init()Lyude
commit 4c732e6ee9e71903934d75b12a021eb3520b6197 upstream. While VGA hotplugging worked(ish) before, it looks like that was mainly because we'd unintentionally enable it in valleyview_crt_detect_hotplug() when we did a force trigger. This doesn't work reliably enough because whenever the display powerwell on vlv gets disabled, the values set in VLV_ADPA get cleared and consequently VGA hotplugging gets disabled. This causes bugs such as one we found on an Intel NUC, where doing the following sequence of hotplugs: - Disconnect all monitors - Connect VGA - Disconnect VGA - Connect HDMI Would result in VGA hotplugging becoming disabled, due to the powerwells getting toggled in the process of connecting HDMI. Changes since v3: - Expose intel_crt_reset() through intel_drv.h and call that in vlv_display_power_well_init() instead of encoder->base.funcs->reset(&encoder->base); Changes since v2: - Use intel_encoder structs instead of drm_encoder structs Changes since v1: - Instead of handling the register writes ourself, we just reuse intel_crt_detect() - Instead of resetting the ADPA during display IRQ installation, we now reset them in vlv_display_power_well_init() Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Lyude <cpaul@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Rebase over dev_priv/drm_device embedding.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit 9504a89247595b6c066c68aea0c34af1fc78d021) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07drm/i915/vlv: Make intel_crt_reset() per-encoderLyude
commit 4570d833390b10043d082fe535375d4a0e071d9c upstream. This lets call intel_crt_reset() in contexts where IRQs are disabled and as such, can't hold the locks required to work with the connectors. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Lyude <cpaul@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit 28cf71ce3e206db1c3f30b3da31e7b48b2269e4c) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07drm/i915: fix aliasing_ppgtt leakMatthew Auld
commit 3871f42a57efcdc6a9da751a8cb6fa196c212289 upstream. In i915_ggtt_cleanup_hw we need to remember to free aliasing_ppgtt. This fixes the following kmemleak message: unreferenced object 0xffff880213cca000 (size 8192): comm "modprobe", pid 1298, jiffies 4294745402 (age 703.930s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff817c808e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8121f9c2>] kmem_cache_alloc_trace+0x142/0x1d0 [<ffffffffa06d11ef>] i915_gem_init_ggtt+0x10f/0x210 [i915] [<ffffffffa06d71bb>] i915_gem_init+0x5b/0xd0 [i915] [<ffffffffa069749a>] i915_driver_load+0x97a/0x1460 [i915] [<ffffffffa06a26ef>] i915_pci_probe+0x4f/0x70 [i915] [<ffffffff81423015>] local_pci_probe+0x45/0xa0 [<ffffffff81424463>] pci_device_probe+0x103/0x150 [<ffffffff81515e6c>] driver_probe_device+0x22c/0x440 [<ffffffff81516151>] __driver_attach+0xd1/0xf0 [<ffffffff8151379c>] bus_for_each_dev+0x6c/0xc0 [<ffffffff8151555e>] driver_attach+0x1e/0x20 [<ffffffff81514fa3>] bus_add_driver+0x1c3/0x280 [<ffffffff81516aa0>] driver_register+0x60/0xe0 [<ffffffff8142297c>] __pci_register_driver+0x4c/0x50 [<ffffffffa013605b>] 0xffffffffa013605b Signed-off-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Fixes: b18b6bde300e ("drm/i915/bdw: Free PPGTT struct") Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470420280-21417-1-git-send-email-matthew.auld@intel.com (cherry picked from commit cb7f27601c81a1e0454e9461e96f65b31fafbea0) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07drm/i915: Acquire audio powerwell for HD-Audio registersChris Wilson
commit 3cffb0a44750726cdc1cc07399efe3cbb45e028b upstream. On Haswell/Broadwell, the HD-Audio block is inside the HDMI/display power well and so the sna-hda audio codec acquires the display power well while it is operational. However, Skylake separates the powerwells again, but yet we still need the audio powerwell to setup the registers. (But then the hardware uses those registers even while powered off???) Acquiring the powerwell around setting the chicken bits when setting up the audio channel does at least silence the WARNs from touching our registers whilst unpowered. We silence our own test cases, but maybe there is a latent bug in using the audio channel? v2: Grab both rpm wakelock and audio wakelock Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96214 Fixes: 03b135cebc47 "ALSA: hda - remove dependency on i915 power well for SKL") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Libin Yang <libin.yang@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Marius Vlad <marius.c.vlad@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470240540-29004-1-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit d838a110f0b310d408ebe6b5a97e36ec27555ebf) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07drm/i915: Fix iboost setting for SKL Y/U DP DDI buffer translation entry 2Ville Syrjälä
commit 85bf59d188721dca37bc8276457e68351213f38f upstream. The spec was recently fixed to have the correct iboost setting for the SKL Y/U DP DDI buffer translation table entry 2. Update our tables to match. Cc: David Weinehall <david.weinehall@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470140517-13011-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> (cherry picked from commit 5ac9056753e79ac5ad1ccc3c99b311688e46e8c9) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07drm/i915: Program iboost settings for HDMI/DVI on SKLVille Syrjälä
commit 7ff9a55614712adf13ce7990565be0263e620f5e upstream. Currently we fail to program the iboost stuff for HDMI/DVI. Let's remedy that. Fixes: f8896f5d58e6 ("drm/i915/skl: Buffer translation improvements") Cc: David Weinehall <david.weinehall@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1468328376-6380-4-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> (cherry picked from commit 8d8bb85eb7d859aa9bbe36e588690a1d22af7608) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07drm/i915: Fix iboost setting for DDI with 4 lanes on SKLVille Syrjälä
commit 5728e0de741a3581e9900c5cbee3a51425daf211 upstream. Bspec says: "For DDIA with x4 capability (DDI_BUF_CTL DDIA Lane Capability Control = DDIA x4), the I_boost value has to be programmed in both tx_blnclegsctl_0 and tx_blnclegsctl_4." Currently we only program tx_blnclegsctl_0. Let's do the other one as well. Fixes: f8896f5d58e6 ("drm/i915/skl: Buffer translation improvements") Cc: David Weinehall <david.weinehall@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1468328376-6380-2-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> (cherry picked from commit a7d8dbc07c8f0faaace983b1e4c6e9495dd0aa75) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07drm/amdgpu: record error code when ring test failedChunming Zhou
commit 1f703e6679f373f5bba4efe7093aa82e91af4037 upstream. Otherwise we may miss errors. Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07drm/amd/amdgpu: compute ring test fail during S4 on CIjimqu
commit 53960b4f89db58bc155d6f8aa0a44ccc59ccb26f upstream. unhalt Instrction Fetch Unit after all rings are inited. Signed-off-by: JimQu <Jim.Qu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07drm/amd/amdgpu: sdma resume fail during S4 on CIjimqu
commit 10ea9434065e56fe14287f89258ecf2fb684ed1a upstream. SDMA could be fail in the thaw() and restore() processes, do software reset if each SDMA engine is busy. Signed-off-by: JimQu <Jim.Qu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07drm/amdgpu: skip TV/CV in display parsingAlex Deucher
commit 611a1507fe8569ce1adab3abc982ea58ab559fb9 upstream. No asics supported by amdgpu support analog TV. Workaround for bug: https://bugs.freedesktop.org/show_bug.cgi?id=97460 Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07drm/amdgpu: avoid a possible array overflowAlex Deucher
commit e1718d97aa88ea44a6a8f50ff464253dd0dacf01 upstream. When looking up the connector type make sure the index is valid. Avoids a later crash if we read past the end of the array. Workaround for bug: https://bugs.freedesktop.org/show_bug.cgi?id=97460 Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07drm/amdgpu: fix lru size grouping v2Christian König
commit 5661538749511d4c2f7d33e1e179f10c545b24d5 upstream. Adding a BO can make it the insertion point for larger sizes as well. v2: add a comment about the guard structure. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07drm/amdgpu: fix amdgpu_move_blit on 32bit systemsChristian König
commit 815d27a46f3119f74fe01fe10bf683aa5bc55597 upstream. This bug seems to be present for a very long time. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07drm/amdgpu: Change GART offset to 64-bitFelix Kuehling
commit cab0b8d50e9bbef62c04067072c953433a87a9ff upstream. The GART aperture size can be bigger than 4GB. Therefore the offset used in amdgpu_gart_bind and amdgpu_gart_unbind must be 64-bit. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability ↵Mario Kleiner
is unknown" commit 196f954e250943df414efd3d632254c29be38e59 upstream. This reverts commit 013dd9e03872 ("drm/i915/dp: fall back to 18 bpp when sink capability is unknown") This commit introduced a regression into stable kernels, as it reduces output color depth to 6 bpc for any video sink connected to a Displayport connector if that sink doesn't report a specific color depth via EDID, or if our EDID parser doesn't actually recognize the proper bpc from EDID. Affected are active DisplayPort->VGA converters and active DisplayPort->DVI converters. Both should be able to handle 8 bpc, but are degraded to 6 bpc with this patch. The reverted commit was meant to fix Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105331 A followup patch implements a fix for that specific bug, which is caused by a faulty EDID of the affected DP panel by adding a new EDID quirk for that panel. DP 18 bpp fallback handling and other improvements to DP sink bpc detection will be handled for future kernels in a separate series of patches. Please backport to stable. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20drm/i915: Never fully mask the the EI up rps interrupt on SNB/IVBVille Syrjälä
commit a7b4667a00025ac28300737c868bd4818b6d8c4d upstream. SNB (and IVB too I suppose) starts to misbehave if the GPU gets stuck in an infinite batch buffer loop. The GPU apparently hogs something critical and CPUs start to lose interrupts and whatnot. We can keep the system limping along by unmasking some interrupts in GEN6_PMINTRMSK. The EI up interrupt has been previously chosen for that task, so let's never mask it. v2: s/gen6_rps_pm_mask/gen6_sanitize_rps_pm_mask/ (Chris) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93122 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1464014568-4529-1-git-send-email-ville.syrjala@linux.intel.com (cherry picked from commit 12c100bfa5d9103b6c4d43636fee09c31e75605a) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20drm/edid: Add 6 bpc quirk for display AEO model 0.Mario Kleiner
commit e10aec652f31ec61d6a0b4d00d8ef8d2b66fa0fd upstream. Bugzilla https://bugzilla.kernel.org/show_bug.cgi?id=105331 reports that the "AEO model 0" display is driven with 8 bpc without dithering by default, which looks bad because that panel is apparently a 6 bpc DP panel with faulty EDID. A fix for this was made by commit 013dd9e03872 ("drm/i915/dp: fall back to 18 bpp when sink capability is unknown"). That commit triggers new regressions in precision for DP->DVI and DP->VGA displays. A patch is out to revert that commit, but it will revert video output for the AEO model 0 panel to 8 bpc without dithering. The EDID 1.3 of that panel, as decoded from the xrandr output attached to that bugzilla bug report, is somewhat faulty, and beyond other problems also sets the "DFP 1.x compliant TMDS" bit, which according to DFP spec means to drive the panel with 8 bpc and no dithering in absence of other colorimetry information. Try to make the original bug reporter happy despite the faulty EDID by adding a quirk to mark that panel as 6 bpc, so 6 bpc output with dithering creates a nice picture. Tested by injecting the edid from the fdo bug into a DP connector via drm_kms_helper.edid_firmware and verifying the 6 bpc + dithering is selected. This patch should be backported to stable. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20drm: aux ->transfer() can return 0, deal with itVille Syrjälä
commit a1f5524a66ff6284d1380cdd7723de82698ff9d3 upstream. Restore the correct behaviour (as in check msg.reply) when aux ->transfer() returns 0. It got removed in commit 82922da39190 ("drm/dp_helper: Retry aux transactions on all errors") Now I can actually dump the "entire" DPCD on a Dell UP2314Q with ddrescue. It has some offsets in the DPCD that can't be read for some resaon, all you get is defers. Previously ddrescue would just give up at the first unredable offset on account of read() returning 0 means EOF. Here's the ddrescue log for the interested: 0x00000000 0x00001400 + 0x00001400 0x00000030 - 0x00001430 0x000001D0 + 0x00001600 0x00000030 - 0x00001630 0x0001F9D0 + 0x00021000 0x00000001 - 0x00021001 0x000DEFFF + Cc: Lyude <cpaul@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch Fixes: 82922da39190 ("drm/dp_helper: Retry aux transactions on all errors") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20drm/i915/gen9: Add WaInPlaceDecompressionHangMika Kuoppala
commit f15f6ca1e706e11fd07611bd4c7f903625349b33 upstream. Add this workaround to prevent hang when in place compression is used. References: HSD#2135774 Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 4ba9c1f7c7b8ca8c1d77f65d408e589dc87b9a2d) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20drm/rockchip: allocate correct crtc state structure on resetJohn Keeping
commit dc0b408f5a87cce3ea3f81a6800244fb7d395435 upstream. Because we are using a custom crtc_state structure, we must override the reset helper to allocate the correct amount of memory. Fixes: 4e257d9eee23 ("drm/rockchip: get rid of rockchip_drm_crtc_mode_config") Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Mark Yao <mark.yao@rock-chips.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20drm/amd/powerplay: fix the incorrect return valueHuang Rui
commit bec5f70dad45f7ad63f97aa0988821532ebeade7 upstream. The return value 0 (false) means fail to find GPIO in atomctrl_get_pp_assign_pin. "-1" returns true as bool actually. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20drm/i915: Update CDCLK_FREQ register on BDW after changing cdclk frequencyVille Syrjälä
commit 7f1052a8fa38df635ab0dc0e6025b64ab9834824 upstream. Update CDCLK_FREQ on BDW after changing the cdclk frequency. Not sure if this is a late addition to the spec, or if I simply overlooked this step when writing the original code. This is what Bspec has to say about CDCLK_FREQ: "Program this field to the CD clock frequency minus one. This is used to generate a divided down clock for miscellaneous timers in display." And the "Broadwell Sequences for Changing CD Clock Frequency" section clarifies this further: "For CD clock 337.5 MHz, program 337 decimal. For CD clock 450 MHz, program 449 decimal. For CD clock 540 MHz, program 539 decimal. For CD clock 675 MHz, program 674 decimal." Cc: Mika Kahola <mika.kahola@intel.com> Fixes: b432e5cfd5e9 ("drm/i915: BDW clock change support") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461689194-6079-2-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20drm: Restore double clflush on the last partial cachelineChris Wilson
commit 396f5d62d1a5fd99421855a08ffdef8edb43c76e upstream. This effectively reverts commit afcd950cafea6e27b739fe7772cbbeed37d05b8b Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Jun 10 15:58:01 2015 +0100 drm: Avoid the double clflush on the last cache line in drm_clflush_virt_range() as we have observed issues with serialisation of the clflush operations on Baytrail+ Atoms with partial updates. Applying the double flush on the last cacheline forces that clflush to be ordered with respect to the previous clflush, and the mfence then protects against prefetches crossing the clflush boundary. The same issue can be demonstrated in userspace with igt/gem_exec_flush. Fixes: afcd950cafea6 (drm: Avoid the double clflush on the last cache...) Testcase: igt/gem_concurrent_blit Testcase: igt/gem_partial_pread_pwrite Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92845 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: dri-devel@lists.freedesktop.org Cc: Akash Goel <akash.goel@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jason Ekstrand <jason.ekstrand@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1467880930-23082-6-git-send-email-chris@chris-wilson.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20drm/nouveau/fbcon: fix font width not divisible by 8Mikulas Patocka
commit 28668f43b8e421634e1623f72a879812288dd06b upstream. The patch f045f459d925 ("drm/nouveau/fbcon: fix out-of-bounds memory accesses") tries to fix some out of memory accesses. Unfortunatelly, the patch breaks the display when using fonts with width that is not divisiable by 8. The monochrome bitmap for each character is stored in memory by lines from top to bottom. Each line is padded to a full byte. For example, for 22x11 font, each line is padded to 16 bits, so each character is consuming 44 bytes total, that is 11 32-bit words. The patch f045f459d925 changed the logic to "dsize = ALIGN(image->width * image->height, 32) >> 5", that is just 8 words - this is incorrect and it causes display corruption. This patch adds the necesary padding of lines to 8 bytes. This patch should be backported to stable kernels where f045f459d925 was backported. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: f045f459d925 ("drm/nouveau/fbcon: fix out-of-bounds memory accesses") Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20drm/nouveau/gr/nv3x: fix instobj write offsets in gr setupIlia Mirkin
commit d0e62ef6ed257715a88d0e5d7cd850a1695429e2 upstream. This should fix some unaligned access warnings. This is also likely to fix non-descript issues on nv30/nv34 as a result of incorrect channel setup. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96836 Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20drm/nouveau: check for supported chipset before booting fbdev off the hwBen Skeggs
commit 0e67bed2c765ff0fdaec62c963881f5416fe3692 upstream. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20drm/radeon: support backlight control for UNIPHY3Alex Deucher
commit d3200be6c423afa1c34f7e39e9f6d04dd5b0af9d upstream. Same interface as other UNIPHY blocks Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20drm/radeon: fix firmware info version checksAlex Deucher
commit 3edc38a0facef45ee22af8afdce3737f421f36ab upstream. Some of the checks didn't handle frev 2 tables properly. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20drm/radeon: Poll for both connect/disconnect on analog connectorsLyude
commit 14ff8d48f2235295dfb3117693008e367b49cdb5 upstream. DRM_CONNECTOR_POLL_CONNECT only enables polling for connections, not disconnections. Because of this, we end up losing hotplug polling for analog connectors once they get connected. Easy way to reproduce: - Grab a machine with a radeon GPU and a VGA port - Plug a monitor into the VGA port, wait for it to update the connector from disconnected to connected - Disconnect the monitor on VGA, a hotplug event is never sent for the removal of the connector. Originally, only using DRM_CONNECTOR_POLL_CONNECT might have been a good idea since doing VGA polling can sometimes result in having to mess with the DAC voltages to figure out whether or not there's actually something there since VGA doesn't have HPD. Doing this would have the potential of showing visible artifacts on the screen every time we ran a poll while a VGA display was connected. Luckily, radeon_vga_detect() only resorts to this sort of polling if the poll is forced, and DRM's polling helper doesn't force it's polls. Additionally, this removes some assignments to connector->polled that weren't actually doing anything. Signed-off-by: Lyude <cpaul@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20drm/radeon: add a delay after ATPX dGPU power offAlex Deucher
commit d814b24fb74cb9797d70cb8053961447c5879a5c upstream. ATPX dGPU power control requires a 200ms delay between power off and on. This should fix dGPU failures on resume from power off. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20drm/amdgpu/gmc7: add missing mullins caseAlex Deucher
commit 7f555c8e5a84b348c2b76f4ca78eae7222354c03 upstream. Looks like this got missed when we ported the code from radeon. Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20drm/amdgpu: fix firmware info version checksAlex Deucher
commit a8a04c994d41a489eb0f2899893209e04e030153 upstream. Some of the checks didn't handle frev 2 tables properly. amdgpu doesn't support any tables pre-frev 2, so drop the checks. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20drm/amdgpu: Disable RPM helpers while reprobing connectors on resumeLyude
commit 23a1a9e54e71593fe5657e883662995d181d2d6b upstream. Just about all of amdgpu's connector probing functions try to acquire runtime PM refs. If we try to do this in the context of amdgpu_resume_kms by calling drm_helper_hpd_irq_event(), we end up deadlocking the system. Since we're guaranteed to be holding the spinlock for RPM in amdgpu_resume_kms, and we already know the GPU is in working order, we need to prevent the RPM helpers from trying to run during the initial connector reprobe on resume. There's a couple of solutions I've explored for fixing this, but this one by far seems to be the simplest and most reliable (plus I'm pretty sure that's what disable_depth is there for anyway). Reproduction recipe: - Get any laptop dual GPUs using PRIME - Make sure runtime PM is enabled for amdgpu - Boot the machine - If the machine managed to boot without hanging, switch out of X to another VT. This should definitely cause X to hang infinitely. Changes since v1: - add appropriate #ifdef checks for CONFIG_PM. This is not very useful, but it appears some kernel test suites test compiling amdgpu with CONFIG_PM disabled, which results in this patch breaking the builds if we don't include this #ifdef Cc: Alex Deucher <alexdeucher@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Lyude <cpaul@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20drm/amdgpu: support backlight control for UNIPHY3Alex Deucher
commit dba6c4fa26ccf47661be5b68dba87e746fa137d8 upstream. Same interface as other UNIPHY blocks Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20drm/amdgpu: Poll for both connect/disconnect on analog connectorsLyude
commit b636a1b3d624b49b23cc1be2f9f6bcbb89aca855 upstream. DRM_CONNECTOR_POLL_CONNECT only enables polling for connections, not disconnections. Because of this, we end up losing hotplug polling for analog connectors once they get connected. Easy way to reproduce: - Grab a machine with an AMD GPU and a VGA port - Plug a monitor into the VGA port, wait for it to update the connector from disconnected to connected - Disconnect the monitor on VGA, a hotplug event is never sent for the removal of the connector. Originally, only using DRM_CONNECTOR_POLL_CONNECT might have been a good idea since doing VGA polling can sometimes result in having to mess with the DAC voltages to figure out whether or not there's actually something there since VGA doesn't have HPD. Doing this would have the potential of showing visible artifacts on the screen every time we ran a poll while a VGA display was connected. Luckily, amdgpu_vga_detect() only resorts to this sort of polling if the poll is forced, and DRM's polling helper doesn't force it's polls. Additionally, this removes some assignments to connector->polled that weren't actually doing anything. Signed-off-by: Lyude <cpaul@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20drm/amdgpu: add a delay after ATPX dGPU power offAlex Deucher
commit f81eb1a349d47694fe1e688336ca1b40ea3e248a upstream. ATPX dGPU power control requires a 200ms delay between power off and on. This should fix dGPU failures on resume from power off. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-19Merge tag 'topic/kbl-4.7-fixes-2016-07-18' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes As promised here's the pile of kbl cherry-picks assembled by Mika&Rodrigo. It's a bit much, but all well-contained to kbl code and been tested for a while in drm-intel-next. Still separate in case too much, but in that case I think we'd need to disable kbl by default again (which would be annoying too) in 4.7. * tag 'topic/kbl-4.7-fixes-2016-07-18' of git://anongit.freedesktop.org/drm-intel: (28 commits) drm/i915/kbl: Introduce the first official DMC for Kabylake. drm/i915: Introduce Kabypoint PCH for Kabylake H/DT. drm/i915/gen9: implement WaConextSwitchWithConcurrentTLBInvalidate drm/i915/gen9: Add WaFbcHighMemBwCorruptionAvoidance drm/i195/fbc: Add WaFbcNukeOnHostModify drm/i915/gen9: Add WaFbcWakeMemOn drm/i915/gen9: Add WaFbcTurnOffFbcWatermark drm/i915/kbl: Add WaClearSlmSpaceAtContextSwitch drm/i915/gen9: Add WaEnableChickenDCPR drm/i915/kbl: Add WaDisableSbeCacheDispatchPortSharing drm/i915/kbl: Add WaDisableGafsUnitClkGating drm/i915/kbl: Add WaForGAMHang drm/i915: Add WaInsertDummyPushConstP for bxt and kbl drm/i915/kbl: Add WaDisableDynamicCreditSharing drm/i915/kbl: Add WaDisableGamClockGating drm/i915/gen9: Enable must set chicken bits in config0 reg drm/i915/kbl: Add WaDisableLSQCROPERFforOCL drm/i915/kbl: Add WaDisableSDEUnitClockGating drm/i915/kbl: Add WaDisableFenceDestinationToSLM for A0 drm/i915/kbl: Add WaEnableGapsTsvCreditFix ...
2016-07-19Merge tag 'drm-intel-fixes-2016-07-18' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes Two more regression fixes for 4.7. * tag 'drm-intel-fixes-2016-07-18' of git://anongit.freedesktop.org/drm-intel: drm/i915: add missing condition for committing planes on crtc drm/i915: Treat eDP as always connected, again
2016-07-18drm/i915/kbl: Introduce the first official DMC for Kabylake.Rodrigo Vivi
Version 1.01. This firmware is made for Kabylake platform so it doesn't need the stepping workaround that we had before. v2: Rebased on top of latest nightly with min version required change. v3: With right CSR_VERSION (Patrik). Cc: Christophe Prigent <christophe.prigent@intel.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461707991-15336-1-git-send-email-rodrigo.vivi@intel.com (cherry picked from commit 4922d4919596219864686be1e70dcd92c685ec9f) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit v1.2.3 (git 2.46.0) at 2026-01-06 11:35:24 +0000