| Age | Commit message (Collapse) | Author |
|
[ Upstream commit cfa0904a35fd0231f4d05da0190f0a22ed881cce ]
[why]
1. With allow_0_dtb_clk enabled, the time required to latch DTBCLK to 600 MHz
depends on the SMU. If DTBCLK is not latched to 600 MHz before set_mode completes,
gating DTBCLK causes the DP2 sink to lose its clock source.
2. The existing DTBCLK gating sequence ungates DTBCLK based on both pix_clk and ref_dtbclk,
but gates DTBCLK when either pix_clk or ref_dtbclk is zero.
pix_clk can be zero outside the set_mode sequence before DTBCLK is properly latched,
which can lead to DTBCLK being gated by mistake.
[how]
Consider both pixel_clk and ref_dtbclk when determining when it is safe to gate DTBCLK;
this is more accurate.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4701
Fixes: 5949e7c4890c ("drm/amd/display: Enable Dynamic DTBCLK Switch")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d04eb0c402780ca037b62a6aecf23b863545ebca)
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 35bcc9168f3ce6416cbf3f776758be0937f84cb3 ]
[why]
Log for sequence tracking
Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com>
Reviewed-by: Yihan Zhu <yihan.zhu@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: cfa0904a35fd ("drm/amd/display: Prevent Gating DTBCLK before It Is Properly Latched")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1bcd679209420305a86833bc357d50021909edaf ]
[why]
DPP CLK enable needs to disable DPPCLK RCG first.
The DPPCLK_en in dccg should always be enabled when the corresponding
pipe is enabled.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: cfa0904a35fd ("drm/amd/display: Prevent Gating DTBCLK before It Is Properly Latched")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0ae47e971b9add8f7b8f8d55ac5f407f6f346758 ]
[why & how]
this is to init to HW real DTBCLK.
and use real HW DTBCLK status to update internal logic state
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: cfa0904a35fd ("drm/amd/display: Prevent Gating DTBCLK before It Is Properly Latched")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f2687d3cc9f905505d7b510c50970176115066a2 ]
Disable Panel Replay on MST links until it's properly implemented. For
instance the required VSC SDP is not programmed on MST and FEC is not
enabled if Panel Replay is enabled.
Fixes: 3257e55d3ea7 ("drm/i915/panelreplay: enable/disable panel replay")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15174
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: stable@vger.kernel.org # v6.8+
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251107124141.911895-1-imre.deak@intel.com
(cherry picked from commit e109f644b871df8440c886a69cdce971ed533088)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[ placed MST check at function start since DPCD read was moved to caller ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit eb6e7f520d6efa4d4ebf1671455abe4a681f7a05 ]
On PF passthrough environment, after hibernate and then resume, coralgemm
will cause gpu page fault.
Mode1 reset happens during hibernate, but partition mode is not restored
on resume, register mmCP_HYP_XCP_CTL and mmCP_PSP_XCP_CTL is not right
after resume. When CP access the MQD BO, wrong stride size is used,
this will cause out of bound access on the MQD BO, resulting page fault.
The fix is to ensure gfx_v9_4_3_switch_compute_partition() is called
when resume from a hibernation.
KFD resume is called separately during a reset recovery or resume from
suspend sequence. Hence it's not required to be called as part of
partition switch.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5d1b32cfe4a676fe552416cb5ae847b215463a1a)
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d52dea485cd3c98cfeeb474cf66cf95df2ab142f ]
If user provides a large value (such as 0x80) for parameter
prefetch_mem_region_instance in vm_bind ioctl, it will cause
BIT(prefetch_region) overflow as below:
"
------------[ cut here ]------------
UBSAN: shift-out-of-bounds in drivers/gpu/drm/xe/xe_vm.c:3414:7
shift exponent 128 is too large for 64-bit type 'long unsigned int'
CPU: 8 UID: 0 PID: 53120 Comm: xe_exec_system_ Tainted: G W 6.18.0-rc1-lgci-xe-kernel+ #200 PREEMPT(voluntary)
Tainted: [W]=WARN
Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023
Call Trace:
<TASK>
dump_stack_lvl+0xa0/0xc0
dump_stack+0x10/0x20
ubsan_epilogue+0x9/0x40
__ubsan_handle_shift_out_of_bounds+0x10e/0x170
? mutex_unlock+0x12/0x20
xe_vm_bind_ioctl.cold+0x20/0x3c [xe]
...
"
Fix it by validating prefetch_region before the BIT() usage.
v2: Add Closes and Cc stable kernels. (Matt)
Reported-by: Koen Koning <koen.koning@intel.com>
Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com>
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6478
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20251112181005.2120521-2-shuicheng.lin@intel.com
(cherry picked from commit 8f565bdd14eec5611cc041dba4650e42ccdf71d9)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit d52dea485cd3c98cfeeb474cf66cf95df2ab142f)
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6cbab9f0da72b4dc3c3f9161197aa3b9daa1fa3a ]
Add a call to put_pid() corresponding to get_task_pid().
host1x_memory_context_alloc() does not take ownership of the PID so we
need to free it here to avoid leaking.
Signed-off-by: Prateek Agarwal <praagarwal@nvidia.com>
Fixes: e09db97889ec ("drm/tegra: Support context isolation")
[mperttunen@nvidia.com: reword commit message]
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20250919-host1x-put-pid-v1-1-19c2163dfa87@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 5bab4c89390f32b2f491f49a151948cd226dd909 upstream.
[Why]
On DCN20 & DCN30, the 6th DPP's & HUBP's are powered on permanently and
cannot be power gated. Thus, when dpp_reset() is invoked for the DPP5,
while it's still powered on, the cached cursor_state
(dpp_base->pos.cur0_ctl.bits.cur0_enable)
and the actual state (CUR0_ENABLE) bit are unsycned. This can cause a
double cursor in full screen with non-native scaling.
[How]
Force disable cursor on DPP5 on plane powerdown for ASICs w/ 6 DPPs/HUBPs.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4673
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 79b3c037f972dcb13e325a8eabfb8da835764e15)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1788ef30725da53face7e311cdf62ad65fababcd upstream.
[Why]
Existing routine has two conversion sequence,
pbn_to_kbps and kbps_to_pbn with margin.
Non of those has without-margin calculation.
kbps_to_pbn with margin conversion includes
fec overhead which has already been included in
pbn_div calculation with 0.994 factor considered.
It is a double counted fec overhead factor that causes
potential bw loss.
[How]
Add without-margin calculation.
Fix fec overhead double counted issue.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3735
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e0dec00f3d05e8c0eceaaebfdca217f8d10d380c)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 71ad9054c1f241be63f9d11df8cbd0aa0352fe16 upstream.
[Why]
When a monitor is booting it's possible that it isn't ready to retrieve
link caps and this can lead to an EDID read failure:
```
[drm:retrieve_link_cap [amdgpu]] *ERROR* retrieve_link_cap: Read receiver caps dpcd data failed.
amdgpu 0000:c5:00.0: [drm] *ERROR* No EDID read.
```
[How]
Rather than msleep once and try a few times, msleep each time. Should
be no changes for existing working monitors, but should correct reading
caps on a monitor that is slow to boot.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 669dca37b3348a447db04bbdcbb3def94d5997cc)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8612badc331bcab2068baefa69e1458085ed89e3 upstream.
[Why]
Empirical measurement of some monitors that fail to read EDID while
booting shows that the number of retries with a 30ms delay between
tries is as high as 16.
[How]
Increase number of retries to 20.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ad1c59ad7cf74ec06e32fe2c330ac1e957222288)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 80d8a9ad1587b64c545d515ab6cb7ecb9908e1b3 upstream.
[Why]
Accoreding to CP updated to RS64 on gfx11,
WRITE_DATA with PREEMPTION_META_MEMORY(dst_sel=8) is illegal for CP FW.
That packet is used for MCBP on F32 based system.
So it would lead to incorrect GRBM write and FW is not handling that
extra case correctly.
[How]
With gfx11 rs64 enabled, skip emit de meta data.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8366cd442d226463e673bed5d199df916f4ecbcf)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 31ab31433c9bd2f255c48dc6cb9a99845c58b1e4 upstream.
During the suspend sequence VPE is already going to be power gated
as part of vpe_suspend(). It's unnecessary to call during calls to
amdgpu_device_set_pg_state().
It actually can expose a race condition with the firmware if s0i3
sequence starts as well. Drop these calls.
Cc: Peyton.Lee@amd.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2a6c826cfeedd7714611ac115371a959ead55bda)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9eb00b5f5697bd56baa3222c7a1426fa15bacfb5 upstream.
Delete the attempt to progress the queue when checking if fence is
signaled. This avoids deadlock.
dma-fence_ops::signaled can be called with the fence lock in unknown
state. For radeon, the fence lock is also the wait queue lock. This can
cause a self deadlock when signaled() tries to make forward progress on
the wait queue. But advancing the queue is unneeded because incorrectly
returning false from signaled() is perfectly acceptable.
Link: https://github.com/brave/brave-browser/issues/49182
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4641
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Robert McClinton <rbmccav@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 527ba26e50ec2ca2be9c7c82f3ad42998a75d0db)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4c5376b4b143c4834ebd392aef2215847752b16a upstream.
driver_find_device() calls get_device() to increment the reference
count once a matching device is found, but there is no put_device() to
balance the reference count. To avoid reference count leakage, add
put_device() to decrease the reference count.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: a31500fe7055 ("drm/tegra: dc: Restore coupling of display controllers")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20251022114720.24937-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 949f1fd2225baefbea2995afa807dba5cbdb6bd3 upstream.
nvkm_falcon_fw::boot is allocated, but no one frees it. This causes a
kmemleak warning.
Make sure this data is deallocated.
Fixes: 2541626cfb79 ("drm/nouveau/acr: use common falcon HS FW code for ACR FWs")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251117084231.2910561-1-namcao@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 660b299bed2a2a55a1f9102d029549d0235f881c upstream.
Commit b6bcbce33596 ("soc/tegra: pmc: Ensure power-domains are in a
known state") was introduced so that all power domains get initialized
to a known working state when booting and it does this by shutting them
down (including asserting resets and disabling clocks) before registering
each power domain with the genpd framework, leaving it to each driver to
later on power its needed domains.
This caused the Google Pixel C to hang when booting due to a workaround
in the DSI driver introduced in commit b22fd0b9639e ("drm/tegra: dsi:
Clear enable register if powered by bootloader") meant to handle the case
where the bootloader enabled the DSI hardware module. The workaround relies
on reading a hardware register to determine the current status and after
b6bcbce33596 that now happens in a powered down state thus leading to
the boot hang.
Fix this by reverting b22fd0b9639e since currently we are guaranteed
that the hardware will be fully reset by the time we start enabling the
DSI module.
Fixes: b6bcbce33596 ("soc/tegra: pmc: Ensure power-domains are in a known state")
Cc: stable@vger.kernel.org
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20251103-diogo-smaug_ec_typec-v1-1-be656ccda391@tecnico.ulisboa.pt
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 22a36e660d014925114feb09a2680bb3c2d1e279 upstream.
Certain multi-GPU configurations (especially GFX12) may hit
data corruption when a DCC-compressed VRAM surface is shared across GPUs
using peer-to-peer (P2P) DMA transfers.
Such surfaces rely on device-local metadata and cannot be safely accessed
through a remote GPU’s page tables. Attempting to import a DCC-enabled
surface through P2P leads to incorrect rendering or GPU faults.
This change disables P2P for DCC-enabled VRAM buffers that are contiguous
and allocated on GFX12+ hardware. In these cases, the importer falls back
to the standard system-memory path, avoiding invalid access to compressed
surfaces.
Future work could consider optional migration (VRAM→System→VRAM) if a
performance regression is observed when `attach->peer2peer = false`.
Tested on:
- Dual RX 9700 XT (Navi4x) setup
- GNOME and Wayland compositor scenarios
- Confirmed no corruption after disabling P2P under these conditions
v2: Remove check TTM_PL_VRAM & TTM_PL_FLAG_CONTIGUOUS.
v3: simplify for upsteam and fix ip version check (Alex)
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9dff2bb709e6fbd97e263fd12bf12802d2b5a0cf)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d15deafab5d722afb9e2f83c5edcdef9d9d98bd1 upstream.
Over allocation of save area is not fatal, only under allocation is.
ROCm has various components that independently claim authority over save
area size.
Unless KFD decides to claim single authority, relax size checks.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 15bd4958fe38e763bc17b607ba55155254a01f55)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 32b415a9dc2c212e809b7ebc2b14bc3fbda2b9af ]
This data originates from userspace and is used in buffer offset
calculations which could potentially overflow causing an out-of-bounds
access.
Fixes: 8ce75f8ab904 ("drm/vmwgfx: Update device includes for DX device functionality")
Reported-by: Rohit Keshri <rkeshri@redhat.com>
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20251021190128.13014-1-ian.forbes@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 883f309add55060233bf11c1ea6947140372920f ]
Previously, APU platforms (and other scenarios with uninitialized VRAM managers)
triggered a NULL pointer dereference in `ttm_resource_manager_usage()`. The root
cause is not that the `struct ttm_resource_manager *man` pointer itself is NULL,
but that `man->bdev` (the backing device pointer within the manager) remains
uninitialized (NULL) on APUs—since APUs lack dedicated VRAM and do not fully
set up VRAM manager structures. When `ttm_resource_manager_usage()` attempts to
acquire `man->bdev->lru_lock`, it dereferences the NULL `man->bdev`, leading to
a kernel OOPS.
1. **amdgpu_cs.c**: Extend the existing bandwidth control check in
`amdgpu_cs_get_threshold_for_moves()` to include a check for
`ttm_resource_manager_used()`. If the manager is not used (uninitialized
`bdev`), return 0 for migration thresholds immediately—skipping VRAM-specific
logic that would trigger the NULL dereference.
2. **amdgpu_kms.c**: Update the `AMDGPU_INFO_VRAM_USAGE` ioctl and memory info
reporting to use a conditional: if the manager is used, return the real VRAM
usage; otherwise, return 0. This avoids accessing `man->bdev` when it is
NULL.
3. **amdgpu_virt.c**: Modify the vf2pf (virtual function to physical function)
data write path. Use `ttm_resource_manager_used()` to check validity: if the
manager is usable, calculate `fb_usage` from VRAM usage; otherwise, set
`fb_usage` to 0 (APUs have no discrete framebuffer to report).
This approach is more robust than APU-specific checks because it:
- Works for all scenarios where the VRAM manager is uninitialized (not just APUs),
- Aligns with TTM's design by using its native helper function,
- Preserves correct behavior for discrete GPUs (which have fully initialized
`man->bdev` and pass the `ttm_resource_manager_used()` check).
v4: use ttm_resource_manager_used(&adev->mman.vram_mgr.manager) instead of checking the adev->gmc.is_app_apu flag (Christian)
Reviewed-by: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 33cc891b56b93cad1a83263eaf2e417436f70c82 ]
Otherwise accessing them can cause a crash.
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5c05bcf6ae7732da1bd4dc1958d527b5f07f216a ]
On various SI GPUs, a flickering can be observed near the bottom
edge of the screen when using a single 4K 60Hz monitor over DP.
Disabling MCLK switching works around this problem.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5d55ed19d4190d2c210ac05ac7a53f800a8c6fe5 ]
Those can be triggered trivially by userspace.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b11a020d914c3b7628f56a9ea476a5b03679489b ]
Currently Xe driver is triggering flr without any clean-up on
shutdown. This is causing random warnings from pending related works as the
underlying hardware is reset in the middle of their execution.
Fix this by performing clean shutdown also when using flr.
Fixes: 501d799a47e2 ("drm/xe: Wire up device shutdown handler")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Maarten Lankhorst <dev@lankhorst.se>
Link: https://patch.msgid.link/20251031122312.1836534-1-jouni.hogander@intel.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
(cherry picked from commit a4ff26b7c8ef38e4dd34f77cbcd73576fdde6dd4)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9cd27eec872f0b95dcdd811edc39d2d32e4158c8 ]
The xe_device_shutdown() function was needing a few declarations
that were only required under a specific condition. This change
moves those declarations to be within that conditional branch
to avoid unnecessary declarations.
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251007100208.1407021-1-tejas.upadhyay@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit 15b3036045188f4da4ca62b2ed01b0f160252e9b)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Stable-dep-of: b11a020d914c ("drm/xe: Do clean shutdown also when using flr")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 95af8f4fdce8349a5fe75264007f1af2aa1082ea ]
Cancel and wait for any Dead CT worker to complete before continuing
with device unbinding. Else the worker will end up using resources freed
by the undind operation.
Cc: Zhanjun Dong <zhanjun.dong@intel.com>
Fixes: d2c5a5a926f4 ("drm/xe/guc: Dead CT helper")
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20251103123144.3231829-6-balasubramani.vivekanandan@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 492671339114e376aaa38626d637a2751cdef263)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b09cb2996cdf50cd1ab4020e002c95d742c81313 ]
commit c760bcda83571 ("drm/amd: Check whether secure display TA loaded
successfully") attempted to fix extra messages, but failed to port the
cleanup that was in commit 5c6d52ff4b61e ("drm/amd: Don't try to enable
secure display TA multiple times") to prevent multiple tries.
Add that to the failure handling path even on a quick failure.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4679
Fixes: c760bcda8357 ("drm/amd: Check whether secure display TA loaded successfully")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4104c0a454f6a4d1e0d14895d03c0e7bdd0c8240)
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7d44ad6b43d0be43d080180413a1b6c24cfbd266 ]
When tick values are large, the multiplication by NSEC_PER_SEC is larger
than 64 bits and results in bad conversions.
The issue is seen in PMU busyness counters that look like they have
wrapped around due to bad conversion. i915 PMU implementation returns
monotonically increasing counters. If a count is lesser than previous
one, it will only return the larger value until the smaller value
catches up. The user will see this as zero delta between two
measurements even though the engines are busy.
Fix it by using mul_u64_u32_div()
Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14955
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/20251016000350.1152382-2-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 2ada9cb1df3f5405a01d013b708b1b0914efccfe)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo: Added the Fixes tag while cherry-picking to fixes]
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 84bbe327a5cbb060f3321c9d9d4d53936fc1ef9b ]
On completion of i915_vma_pin_ww(), a synchronous variant of
dma_fence_work_commit() is called. When pinning a VMA to GGTT address
space on a Cherry View family processor, or on a Broxton generation SoC
with VTD enabled, i.e., when stop_machine() is then called from
intel_ggtt_bind_vma(), that can potentially lead to lock inversion among
reservation_ww and cpu_hotplug locks.
[86.861179] ======================================================
[86.861193] WARNING: possible circular locking dependency detected
[86.861209] 6.15.0-rc5-CI_DRM_16515-gca0305cadc2d+ #1 Tainted: G U
[86.861226] ------------------------------------------------------
[86.861238] i915_module_loa/1432 is trying to acquire lock:
[86.861252] ffffffff83489090 (cpu_hotplug_lock){++++}-{0:0}, at: stop_machine+0x1c/0x50
[86.861290]
but task is already holding lock:
[86.861303] ffffc90002e0b4c8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915]
[86.862233]
which lock already depends on the new lock.
[86.862251]
the existing dependency chain (in reverse order) is:
[86.862265]
-> #5 (reservation_ww_class_mutex){+.+.}-{3:3}:
[86.862292] dma_resv_lockdep+0x19a/0x390
[86.862315] do_one_initcall+0x60/0x3f0
[86.862334] kernel_init_freeable+0x3cd/0x680
[86.862353] kernel_init+0x1b/0x200
[86.862369] ret_from_fork+0x47/0x70
[86.862383] ret_from_fork_asm+0x1a/0x30
[86.862399]
-> #4 (reservation_ww_class_acquire){+.+.}-{0:0}:
[86.862425] dma_resv_lockdep+0x178/0x390
[86.862440] do_one_initcall+0x60/0x3f0
[86.862454] kernel_init_freeable+0x3cd/0x680
[86.862470] kernel_init+0x1b/0x200
[86.862482] ret_from_fork+0x47/0x70
[86.862495] ret_from_fork_asm+0x1a/0x30
[86.862509]
-> #3 (&mm->mmap_lock){++++}-{3:3}:
[86.862531] down_read_killable+0x46/0x1e0
[86.862546] lock_mm_and_find_vma+0xa2/0x280
[86.862561] do_user_addr_fault+0x266/0x8e0
[86.862578] exc_page_fault+0x8a/0x2f0
[86.862593] asm_exc_page_fault+0x27/0x30
[86.862607] filldir64+0xeb/0x180
[86.862620] kernfs_fop_readdir+0x118/0x480
[86.862635] iterate_dir+0xcf/0x2b0
[86.862648] __x64_sys_getdents64+0x84/0x140
[86.862661] x64_sys_call+0x1058/0x2660
[86.862675] do_syscall_64+0x91/0xe90
[86.862689] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[86.862703]
-> #2 (&root->kernfs_rwsem){++++}-{3:3}:
[86.862725] down_write+0x3e/0xf0
[86.862738] kernfs_add_one+0x30/0x3c0
[86.862751] kernfs_create_dir_ns+0x53/0xb0
[86.862765] internal_create_group+0x134/0x4c0
[86.862779] sysfs_create_group+0x13/0x20
[86.862792] topology_add_dev+0x1d/0x30
[86.862806] cpuhp_invoke_callback+0x4b5/0x850
[86.862822] cpuhp_issue_call+0xbf/0x1f0
[86.862836] __cpuhp_setup_state_cpuslocked+0x111/0x320
[86.862852] __cpuhp_setup_state+0xb0/0x220
[86.862866] topology_sysfs_init+0x30/0x50
[86.862879] do_one_initcall+0x60/0x3f0
[86.862893] kernel_init_freeable+0x3cd/0x680
[86.862908] kernel_init+0x1b/0x200
[86.862921] ret_from_fork+0x47/0x70
[86.862934] ret_from_fork_asm+0x1a/0x30
[86.862947]
-> #1 (cpuhp_state_mutex){+.+.}-{3:3}:
[86.862969] __mutex_lock+0xaa/0xed0
[86.862982] mutex_lock_nested+0x1b/0x30
[86.862995] __cpuhp_setup_state_cpuslocked+0x67/0x320
[86.863012] __cpuhp_setup_state+0xb0/0x220
[86.863026] page_alloc_init_cpuhp+0x2d/0x60
[86.863041] mm_core_init+0x22/0x2d0
[86.863054] start_kernel+0x576/0xbd0
[86.863068] x86_64_start_reservations+0x18/0x30
[86.863084] x86_64_start_kernel+0xbf/0x110
[86.863098] common_startup_64+0x13e/0x141
[86.863114]
-> #0 (cpu_hotplug_lock){++++}-{0:0}:
[86.863135] __lock_acquire+0x1635/0x2810
[86.863152] lock_acquire+0xc4/0x2f0
[86.863166] cpus_read_lock+0x41/0x100
[86.863180] stop_machine+0x1c/0x50
[86.863194] bxt_vtd_ggtt_insert_entries__BKL+0x3b/0x60 [i915]
[86.863987] intel_ggtt_bind_vma+0x43/0x70 [i915]
[86.864735] __vma_bind+0x55/0x70 [i915]
[86.865510] fence_work+0x26/0xa0 [i915]
[86.866248] fence_notify+0xa1/0x140 [i915]
[86.866983] __i915_sw_fence_complete+0x8f/0x270 [i915]
[86.867719] i915_sw_fence_commit+0x39/0x60 [i915]
[86.868453] i915_vma_pin_ww+0x462/0x1360 [i915]
[86.869228] i915_vma_pin.constprop.0+0x133/0x1d0 [i915]
[86.870001] initial_plane_vma+0x307/0x840 [i915]
[86.870774] intel_initial_plane_config+0x33f/0x670 [i915]
[86.871546] intel_display_driver_probe_nogem+0x1c6/0x260 [i915]
[86.872330] i915_driver_probe+0x7fa/0xe80 [i915]
[86.873057] i915_pci_probe+0xe6/0x220 [i915]
[86.873782] local_pci_probe+0x47/0xb0
[86.873802] pci_device_probe+0xf3/0x260
[86.873817] really_probe+0xf1/0x3c0
[86.873833] __driver_probe_device+0x8c/0x180
[86.873848] driver_probe_device+0x24/0xd0
[86.873862] __driver_attach+0x10f/0x220
[86.873876] bus_for_each_dev+0x7f/0xe0
[86.873892] driver_attach+0x1e/0x30
[86.873904] bus_add_driver+0x151/0x290
[86.873917] driver_register+0x5e/0x130
[86.873931] __pci_register_driver+0x7d/0x90
[86.873945] i915_pci_register_driver+0x23/0x30 [i915]
[86.874678] i915_init+0x37/0x120 [i915]
[86.875347] do_one_initcall+0x60/0x3f0
[86.875369] do_init_module+0x97/0x2a0
[86.875385] load_module+0x2c54/0x2d80
[86.875398] init_module_from_file+0x96/0xe0
[86.875413] idempotent_init_module+0x117/0x330
[86.875426] __x64_sys_finit_module+0x77/0x100
[86.875440] x64_sys_call+0x24de/0x2660
[86.875454] do_syscall_64+0x91/0xe90
[86.875470] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[86.875486]
other info that might help us debug this:
[86.875502] Chain exists of:
cpu_hotplug_lock --> reservation_ww_class_acquire --> reservation_ww_class_mutex
[86.875539] Possible unsafe locking scenario:
[86.875552] CPU0 CPU1
[86.875563] ---- ----
[86.875573] lock(reservation_ww_class_mutex);
[86.875588] lock(reservation_ww_class_acquire);
[86.875606] lock(reservation_ww_class_mutex);
[86.875624] rlock(cpu_hotplug_lock);
[86.875637]
*** DEADLOCK ***
[86.875650] 3 locks held by i915_module_loa/1432:
[86.875663] #0: ffff888101f5c1b0 (&dev->mutex){....}-{3:3}, at: __driver_attach+0x104/0x220
[86.875699] #1: ffffc90002e0b4a0 (reservation_ww_class_acquire){+.+.}-{0:0}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915]
[86.876512] #2: ffffc90002e0b4c8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915]
[86.877305]
stack backtrace:
[86.877326] CPU: 0 UID: 0 PID: 1432 Comm: i915_module_loa Tainted: G U 6.15.0-rc5-CI_DRM_16515-gca0305cadc2d+ #1 PREEMPT(voluntary)
[86.877334] Tainted: [U]=USER
[86.877336] Hardware name: /NUC5CPYB, BIOS PYBSWCEL.86A.0079.2020.0420.1316 04/20/2020
[86.877339] Call Trace:
[86.877344] <TASK>
[86.877353] dump_stack_lvl+0x91/0xf0
[86.877364] dump_stack+0x10/0x20
[86.877369] print_circular_bug+0x285/0x360
[86.877379] check_noncircular+0x135/0x150
[86.877390] __lock_acquire+0x1635/0x2810
[86.877403] lock_acquire+0xc4/0x2f0
[86.877408] ? stop_machine+0x1c/0x50
[86.877422] ? __pfx_bxt_vtd_ggtt_insert_entries__cb+0x10/0x10 [i915]
[86.878173] cpus_read_lock+0x41/0x100
[86.878182] ? stop_machine+0x1c/0x50
[86.878191] ? __pfx_bxt_vtd_ggtt_insert_entries__cb+0x10/0x10 [i915]
[86.878916] stop_machine+0x1c/0x50
[86.878927] bxt_vtd_ggtt_insert_entries__BKL+0x3b/0x60 [i915]
[86.879652] intel_ggtt_bind_vma+0x43/0x70 [i915]
[86.880375] __vma_bind+0x55/0x70 [i915]
[86.881133] fence_work+0x26/0xa0 [i915]
[86.881851] fence_notify+0xa1/0x140 [i915]
[86.882566] __i915_sw_fence_complete+0x8f/0x270 [i915]
[86.883286] i915_sw_fence_commit+0x39/0x60 [i915]
[86.884003] i915_vma_pin_ww+0x462/0x1360 [i915]
[86.884756] ? i915_vma_pin.constprop.0+0x6c/0x1d0 [i915]
[86.885513] i915_vma_pin.constprop.0+0x133/0x1d0 [i915]
[86.886281] initial_plane_vma+0x307/0x840 [i915]
[86.887049] intel_initial_plane_config+0x33f/0x670 [i915]
[86.887819] intel_display_driver_probe_nogem+0x1c6/0x260 [i915]
[86.888587] i915_driver_probe+0x7fa/0xe80 [i915]
[86.889293] ? mutex_unlock+0x12/0x20
[86.889301] ? drm_privacy_screen_get+0x171/0x190
[86.889308] ? acpi_dev_found+0x66/0x80
[86.889321] i915_pci_probe+0xe6/0x220 [i915]
[86.890038] local_pci_probe+0x47/0xb0
[86.890049] pci_device_probe+0xf3/0x260
[86.890058] really_probe+0xf1/0x3c0
[86.890067] __driver_probe_device+0x8c/0x180
[86.890072] driver_probe_device+0x24/0xd0
[86.890078] __driver_attach+0x10f/0x220
[86.890083] ? __pfx___driver_attach+0x10/0x10
[86.890088] bus_for_each_dev+0x7f/0xe0
[86.890097] driver_attach+0x1e/0x30
[86.890101] bus_add_driver+0x151/0x290
[86.890107] driver_register+0x5e/0x130
[86.890113] __pci_register_driver+0x7d/0x90
[86.890119] i915_pci_register_driver+0x23/0x30 [i915]
[86.890833] i915_init+0x37/0x120 [i915]
[86.891482] ? __pfx_i915_init+0x10/0x10 [i915]
[86.892135] do_one_initcall+0x60/0x3f0
[86.892145] ? __kmalloc_cache_noprof+0x33f/0x470
[86.892157] do_init_module+0x97/0x2a0
[86.892164] load_module+0x2c54/0x2d80
[86.892168] ? __kernel_read+0x15c/0x300
[86.892185] ? kernel_read_file+0x2b1/0x320
[86.892195] init_module_from_file+0x96/0xe0
[86.892199] ? init_module_from_file+0x96/0xe0
[86.892211] idempotent_init_module+0x117/0x330
[86.892224] __x64_sys_finit_module+0x77/0x100
[86.892230] x64_sys_call+0x24de/0x2660
[86.892236] do_syscall_64+0x91/0xe90
[86.892243] ? irqentry_exit+0x77/0xb0
[86.892249] ? sysvec_apic_timer_interrupt+0x57/0xc0
[86.892256] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[86.892261] RIP: 0033:0x7303e1b2725d
[86.892271] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8b bb 0d 00 f7 d8 64 89 01 48
[86.892276] RSP: 002b:00007ffddd1fdb38 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[86.892281] RAX: ffffffffffffffda RBX: 00005d771d88fd90 RCX: 00007303e1b2725d
[86.892285] RDX: 0000000000000000 RSI: 00005d771d893aa0 RDI: 000000000000000c
[86.892287] RBP: 00007ffddd1fdbf0 R08: 0000000000000040 R09: 00007ffddd1fdb80
[86.892289] R10: 00007303e1c03b20 R11: 0000000000000246 R12: 00005d771d893aa0
[86.892292] R13: 0000000000000000 R14: 00005d771d88f0d0 R15: 00005d771d895710
[86.892304] </TASK>
Call asynchronous variant of dma_fence_work_commit() in that case.
v3: Provide more verbose in-line comment (Andi),
- mention target environments in commit message.
Fixes: 7d1c2618eac59 ("drm/i915: Take reservation lock around i915_vma_pin.")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14985
Cc: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Acked-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20251023082925.351307-6-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 648ef1324add1c2e2b6041cdf0b28d31fbca5f13)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit afcfb6c8474d9e750880aaa77952cc588f859613 ]
Call pm_runtime_resume_and_get() before accessing GCE hardware in
mbox_send_message(), and invoke pm_runtime_put_autosuspend() in the
cmdq callback to release the PM reference and start autosuspend for
GCE. This ensures correct power management for the GCE device.
Fixes: 8afe816b0c99 ("mailbox: mtk-cmdq-mailbox: Implement Runtime PM with autosuspend")
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250829091727.3745415-3-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit fdc93beeadc2439e5e85d056a8fe681dcced09da upstream.
[Why & How]
This fixes the black screen issue on certain APUs with HDMI,
accompanied by the following messages:
amdgpu 0000:c4:00.0: amdgpu: [drm] Failed to setup vendor info
frame on connector DP-1: -22
amdgpu 0000:c4:00.0: [drm] Cannot find any crtc or sizes [drm]
Cannot find any crtc or sizes
Fixes: 489f0f600ce2 ("drm/amd/display: Fix DVI-D/HDMI adapters")
Suggested-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 678c901443a6d2e909e3b51331a20f9d8f84ce82)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 38ab33dbea594700c8d6cc81eec0a54e95d3eb2f upstream.
Align the function headers for `amdgpu_max_hdmi_pixel_clock` and
`amdgpu_connector_dvi_mode_valid` with the function implementations so
they match the expected kdoc style.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c:1199: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Returns the maximum supported HDMI (TMDS) pixel clock in KHz.
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c:1212: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Validates the given display mode on DVI and HDMI connectors.
Fixes: 585b2f685c56 ("drm/amdgpu: Respect max pixel clock for HDMI and DVI-D (v2)")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 46b0e6b9d749cfa891e6969d6565be1131c53aa2 upstream.
The error log is supposed to be gaurded under if failure condition.
Fixes: faab5ea08367 ("drm/amdgpu: Check vcn sram load return value")
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2f9c63883730a0bfecb086e6e59246933f936ca1 upstream.
Use `atomic_commit_setup` to change the DC stream state. It's a
preparation to remove from `atomic_check` changes in CRTC color
components of DC stream state and prevent DC to commit TEST_ONLY
changes.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/4444
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6dd97ceb645c08aca9fc871a3006e47fe699f0ac upstream.
When a connector is connected but inactive (e.g., disabled by desktop
environments), pipe_ctx->stream_res.tg will be destroyed. Then, reading
odm_combine_segments causes kernel NULL pointer dereference.
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 16 UID: 0 PID: 26474 Comm: cat Not tainted 6.17.0+ #2 PREEMPT(lazy) e6a17af9ee6db7c63e9d90dbe5b28ccab67520c6
Hardware name: LENOVO 21Q4/LNVNB161216, BIOS PXCN25WW 03/27/2025
RIP: 0010:odm_combine_segments_show+0x93/0xf0 [amdgpu]
Code: 41 83 b8 b0 00 00 00 01 75 6e 48 98 ba a1 ff ff ff 48 c1 e0 0c 48 8d 8c 07 d8 02 00 00 48 85 c9 74 2d 48 8b bc 07 f0 08 00 00 <48> 8b 07 48 8b 80 08 02 00>
RSP: 0018:ffffd1bf4b953c58 EFLAGS: 00010286
RAX: 0000000000005000 RBX: ffff8e35976b02d0 RCX: ffff8e3aeed052d8
RDX: 00000000ffffffa1 RSI: ffff8e35a3120800 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffff8e3580eb0000 R09: ffff8e35976b02d0
R10: ffffd1bf4b953c78 R11: 0000000000000000 R12: ffffd1bf4b953d08
R13: 0000000000040000 R14: 0000000000000001 R15: 0000000000000001
FS: 00007f44d3f9f740(0000) GS:ffff8e3caa47f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000006485c2000 CR4: 0000000000f50ef0
PKRU: 55555554
Call Trace:
<TASK>
seq_read_iter+0x125/0x490
? __alloc_frozen_pages_noprof+0x18f/0x350
seq_read+0x12c/0x170
full_proxy_read+0x51/0x80
vfs_read+0xbc/0x390
? __handle_mm_fault+0xa46/0xef0
? do_syscall_64+0x71/0x900
ksys_read+0x73/0xf0
do_syscall_64+0x71/0x900
? count_memcg_events+0xc2/0x190
? handle_mm_fault+0x1d7/0x2d0
? do_user_addr_fault+0x21a/0x690
? exc_page_fault+0x7e/0x1a0
entry_SYSCALL_64_after_hwframe+0x6c/0x74
RIP: 0033:0x7f44d4031687
Code: 48 89 fa 4c 89 df e8 58 b3 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00>
RSP: 002b:00007ffdb4b5f0b0 EFLAGS: 00000202 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 00007f44d3f9f740 RCX: 00007f44d4031687
RDX: 0000000000040000 RSI: 00007f44d3f5e000 RDI: 0000000000000003
RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00007f44d3f5e000
R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000040000
</TASK>
Modules linked in: tls tcp_diag inet_diag xt_mark ccm snd_hrtimer snd_seq_dummy snd_seq_midi snd_seq_oss snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device x>
snd_hda_codec_atihdmi snd_hda_codec_realtek_lib lenovo_wmi_helpers think_lmi snd_hda_codec_generic snd_hda_codec_hdmi snd_soc_core kvm snd_compress uvcvideo sn>
platform_profile joydev amd_pmc mousedev mac_hid sch_fq_codel uinput i2c_dev parport_pc ppdev lp parport nvme_fabrics loop nfnetlink ip_tables x_tables dm_cryp>
CR2: 0000000000000000
---[ end trace 0000000000000000 ]---
RIP: 0010:odm_combine_segments_show+0x93/0xf0 [amdgpu]
Code: 41 83 b8 b0 00 00 00 01 75 6e 48 98 ba a1 ff ff ff 48 c1 e0 0c 48 8d 8c 07 d8 02 00 00 48 85 c9 74 2d 48 8b bc 07 f0 08 00 00 <48> 8b 07 48 8b 80 08 02 00>
RSP: 0018:ffffd1bf4b953c58 EFLAGS: 00010286
RAX: 0000000000005000 RBX: ffff8e35976b02d0 RCX: ffff8e3aeed052d8
RDX: 00000000ffffffa1 RSI: ffff8e35a3120800 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffff8e3580eb0000 R09: ffff8e35976b02d0
R10: ffffd1bf4b953c78 R11: 0000000000000000 R12: ffffd1bf4b953d08
R13: 0000000000040000 R14: 0000000000000001 R15: 0000000000000001
FS: 00007f44d3f9f740(0000) GS:ffff8e3caa47f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000006485c2000 CR4: 0000000000f50ef0
PKRU: 55555554
Fix this by checking pipe_ctx->stream_res.tg before dereferencing.
Fixes: 07926ba8a44f ("drm/amd/display: Add debugfs interface for ODM combine info")
Signed-off-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mario Limoncello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f19bbecd34e3c15eed7e5e593db2ac0fc7a0e6d8)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7c5609b72bfe57d8c601d9561e0d2551b605c017 upstream.
Fix the flows for S0ix. There is no need to stop
rlc or reintialize PMFW in S0ix.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4659
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fd39b5a5830d8f2553e0c09d4d50bdff28b10080)
Cc: <stable@vger.kernel.org> # c81f5cebe849: drm/amdgpu: Drop PMFW RLC notifier from amdgpu_device_suspend()
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 487df8b698345dd5a91346335f05170ed5f29d4e upstream.
The Mesa issue referenced below pointed out a possible deadlock:
[ 1231.611031] Possible interrupt unsafe locking scenario:
[ 1231.611033] CPU0 CPU1
[ 1231.611034] ---- ----
[ 1231.611035] lock(&xa->xa_lock#17);
[ 1231.611038] local_irq_disable();
[ 1231.611039] lock(&fence->lock);
[ 1231.611041] lock(&xa->xa_lock#17);
[ 1231.611044] <Interrupt>
[ 1231.611045] lock(&fence->lock);
[ 1231.611047]
*** DEADLOCK ***
In this example, CPU0 would be any function accessing job->dependencies
through the xa_* functions that don't disable interrupts (eg:
drm_sched_job_add_dependency(), drm_sched_entity_kill_jobs_cb()).
CPU1 is executing drm_sched_entity_kill_jobs_cb() as a fence signalling
callback so in an interrupt context. It will deadlock when trying to
grab the xa_lock which is already held by CPU0.
Replacing all xa_* usage by their xa_*_irq counterparts would fix
this issue, but Christian pointed out another issue: dma_fence_signal
takes fence.lock and so does dma_fence_add_callback.
dma_fence_signal() // locks f1.lock
-> drm_sched_entity_kill_jobs_cb()
-> foreach dependencies
-> dma_fence_add_callback() // locks f2.lock
This will deadlock if f1 and f2 share the same spinlock.
To fix both issues, the code iterating on dependencies and re-arming them
is moved out to drm_sched_entity_kill_jobs_work().
Cc: stable@vger.kernel.org # v6.2+
Fixes: 2fdb8a8f07c2 ("drm/scheduler: rework entity flush, kill and fini")
Link: https://gitlab.freedesktop.org/mesa/mesa/-/issues/13908
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
[phasta: commit message nits]
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251104095358.15092-1-pierre-eric.pelloux-prayer@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3c6a743c6961cc2cab453b343bb157d6bbbf8120 upstream.
[Why]
drm_dp_mst_topology_queue_probe() is used under the assumption that
mst is already initialized. If we connect system with SST first
then switch to the mst branch during suspend, we will fail probing
topology by calling the wrong API since the mst manager is yet to
be initialized.
[How]
At dm_resume(), once it's detected as mst branc connected, check if
the mst is initialized already. If not, call
dm_helpers_dp_mst_start_top_mgr() instead to initialize mst
V2: Adjust the commit msg a bit
Fixes: bc068194f548 ("drm/amd/display: Don't write DP_MSTM_CTRL after LT")
Cc: Fangzhi Zuo <jerry.zuo@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 62320fb8d91a0bddc44a228203cfa9bfbb5395bd)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9882a40640036d5bbc590426a78981526d4f2345 upstream.
Commit c410fa9b07c3 ("drm/mediatek: Add AFBC support to Mediatek DRM
driver") added AFBC support to Mediatek DRM and enabled the
32x8/split/sparse modifier.
However, this is currently broken on Mediatek MT8188 (Genio 700 EVK
platform); tested using upstream Kernel and Mesa (v25.2.1), AFBC is used by
default since Mesa v25.0.
Kernel trace reports vblank timeouts constantly, and the render is garbled:
```
[CRTC:62:crtc-0] vblank wait timed out
WARNING: CPU: 7 PID: 70 at drivers/gpu/drm/drm_atomic_helper.c:1835 drm_atomic_helper_wait_for_vblanks.part.0+0x24c/0x27c
[...]
Hardware name: MediaTek Genio-700 EVK (DT)
Workqueue: events_unbound commit_work
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drm_atomic_helper_wait_for_vblanks.part.0+0x24c/0x27c
lr : drm_atomic_helper_wait_for_vblanks.part.0+0x24c/0x27c
sp : ffff80008337bca0
x29: ffff80008337bcd0 x28: 0000000000000061 x27: 0000000000000000
x26: 0000000000000001 x25: 0000000000000000 x24: ffff0000c9dcc000
x23: 0000000000000001 x22: 0000000000000000 x21: ffff0000c66f2f80
x20: ffff0000c0d7d880 x19: 0000000000000000 x18: 000000000000000a
x17: 000000040044ffff x16: 005000f2b5503510 x15: 0000000000000000
x14: 0000000000000000 x13: 74756f2064656d69 x12: 742074696177206b
x11: 0000000000000058 x10: 0000000000000018 x9 : ffff800082396a70
x8 : 0000000000057fa8 x7 : 0000000000000cce x6 : ffff8000823eea70
x5 : ffff0001fef5f408 x4 : ffff80017ccee000 x3 : ffff0000c12cb480
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000c12cb480
Call trace:
drm_atomic_helper_wait_for_vblanks.part.0+0x24c/0x27c (P)
drm_atomic_helper_commit_tail_rpm+0x64/0x80
commit_tail+0xa4/0x1a4
commit_work+0x14/0x20
process_one_work+0x150/0x290
worker_thread+0x2d0/0x3ec
kthread+0x12c/0x210
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
```
Until this gets fixed upstream, disable AFBC support on this platform, as
it's currently broken with upstream Mesa.
Fixes: c410fa9b07c3 ("drm/mediatek: Add AFBC support to Mediatek DRM driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20251024202756.811425-1-ariel.dalessandro@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7574f30337e19045f03126b4c51f525b84e5049e ]
If mmap write lock is taken while draining retry fault, mmap write lock
is not released because svm_range_restore_pages calls mmap_read_unlock
then returns. This causes deadlock and system hangs later because mmap
read or write lock cannot be taken.
Downgrade mmap write lock to read lock if draining retry fault fix this
bug.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit db291ed1732e02e79dca431838713bbf602bda1c ]
[Why]
DP validation may fail with multiple displays and higher color depths.
The sink may support others though.
[How]
When DP bandwidth validation fails, progressively fallback through:
- YUV422 8bpc (bandwidth efficient)
- YUV422 6bpc (reduced color depth)
- YUV420 (last resort)
This resolves cases where displays would show no image due to insufficient
DP link bandwidth for the requested RGB mode.
Suggested-by: Mauri Carvalho <mcarvalho3@lenovo.com>
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 99d7181bca34e96fbf61bdb6844918bdd4df2814 ]
There is race in amdgpu_amdkfd_device_fini_sw and interrupt.
if amdgpu_amdkfd_device_fini_sw run in b/w kfd_cleanup_nodes and
kfree(kfd), and KGD interrupt generated.
kernel panic log:
BUG: kernel NULL pointer dereference, address: 0000000000000098
amdgpu 0000:c8:00.0: amdgpu: Requesting 4 partitions through PSP
PGD d78c68067 P4D d78c68067
kfd kfd: amdgpu: Allocated 3969056 bytes on gart
PUD 1465b8067 PMD @
Oops: @002 [#1] SMP NOPTI
kfd kfd: amdgpu: Total number of KFD nodes to be created: 4
CPU: 115 PID: @ Comm: swapper/115 Kdump: loaded Tainted: G S W OE K
RIP: 0010:_raw_spin_lock_irqsave+0x12/0x40
Code: 89 e@ 41 5c c3 cc cc cc cc 66 66 2e Of 1f 84 00 00 00 00 00 OF 1f 40 00 Of 1f 44% 00 00 41 54 9c 41 5c fa 31 cO ba 01 00 00 00 <fO> OF b1 17 75 Ba 4c 89 e@ 41 Sc
89 c6 e8 07 38 5d
RSP: 0018: ffffc90@1a6b0e28 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000018
0000000000000001 RSI: ffff8883bb623e00 RDI: 0000000000000098
ffff8883bb000000 RO8: ffff888100055020 ROO: ffff888100055020
0000000000000000 R11: 0000000000000000 R12: 0900000000000002
ffff888F2b97da0@ R14: @000000000000098 R15: ffff8883babdfo00
CS: 010 DS: 0000 ES: 0000 CRO: 0000000080050033
CR2: 0000000000000098 CR3: 0000000e7cae2006 CR4: 0000000002770ce0
0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
0000000000000000 DR6: 00000000fffeO7FO DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
kgd2kfd_interrupt+@x6b/0x1f@ [amdgpu]
? amdgpu_fence_process+0xa4/0x150 [amdgpu]
kfd kfd: amdgpu: Node: 0, interrupt_bitmap: 3 YcpxFl Rant tErace
amdgpu_irq_dispatch+0x165/0x210 [amdgpu]
amdgpu_ih_process+0x80/0x100 [amdgpu]
amdgpu: Virtual CRAT table created for GPU
amdgpu_irq_handler+0x1f/@x60 [amdgpu]
__handle_irq_event_percpu+0x3d/0x170
amdgpu: Topology: Add dGPU node [0x74a2:0x1002]
handle_irq_event+0x5a/@xcO
handle_edge_irq+0x93/0x240
kfd kfd: amdgpu: KFD node 1 partition @ size 49148M
asm_call_irq_on_stack+0xf/@x20
</IRQ>
common_interrupt+0xb3/0x130
asm_common_interrupt+0x1le/0x40
5.10.134-010.a1i5000.a18.x86_64 #1
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Philip Yang<Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 51cb93aa0c4a9bb126b76f6e9fd640d88de25cee ]
Don't update DC stream color components during atomic check. The driver
will continue validating the new CRTC color state but will not change DC
stream color components. The DC stream color state will only be
programmed at commit time in the `atomic_setup_commit` stage.
It fixes gamma LUT loss reported by KDE users when changing brightness
quickly or changing Display settings (such as overscan) with nightlight
on and HDR. As KWin can do a test commit with color settings different
from those that should be applied in a non-test-only commit, if the
driver changes DC stream color state in atomic check, this state can be
eventually HW programmed in commit tail, instead of the respective state
set by the non-blocking commit.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4444
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0bf6b216d4783cb51f9af05a49d3cce4fc22dc24 ]
[Why/How]
Call power gating routine only if it is defined.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Sridevi Arvindekar <sarvinde@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f082daf08f2ff313bdf9cf929a28f6d888117986 ]
[Why]
Driver does not pick up and save vbios's clocks during init clocks,
the dispclk in clk_mgr will keep 0 until the first update clocks.
In some cases, OS changes the timing in the second set mode
(lower the pixel clock), causing the driver to lower the dispclk
in prepare bandwidth, which is illegal and causes grey screen.
[How]
1. Dump and save the vbios's clocks, and init the dispclk in
dcn314_init_clocks.
2. Fix the condition in dcn314_update_clocks, regarding a 0kHz value.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Lo-an Chen <lo-an.chen@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c8bedab2d9a1a0daa49ac20f9928a943f7205582 ]
[WHY]
Ensure AVI infoframe updates from stream updates are applied to the active
stream so OS overrides are not lost.
[HOW]
Copy avi_infopacket to stream when valid flag is set.
Follow existing infopacket copy pattern and perform a basic validity check before assignment.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
amdgpu_atom_execute_table_locked()
[ Upstream commit cc9a8e238e42c1f43b98c097995137d644b69245 ]
kcalloc() may fail. When WS is non-zero and allocation fails, ectx.ws
remains NULL while ectx.ws_size is set, leading to a potential NULL
pointer dereference in atom_get_src_int() when accessing WS entries.
Return -ENOMEM on allocation failure to avoid the NULL dereference.
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d7ddcf921e7d0d8ebe82e89635bc9dc26ba9540d ]
Gang submission means that the kernel driver guarantees that multiple
submissions are executed on the HW at the same time on different engines.
Background is that those submissions then depend on each other and each
can't finish stand alone.
SRIOV now uses world switch to preempt submissions on the engines to allow
sharing the HW resources between multiple VFs.
The problem is now that the SRIOV world switch can't know about such inter
dependencies and will cause a timeout if it waits for a partially running
gang submission.
To conclude SRIOV and gang submissions are fundamentally incompatible at
the moment. For now just disable them.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|