summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2023-04-05Input: focaltech - use explicitly signed char typeJason A. Donenfeld
commit 8980f190947ba29f23110408e712444884b74251 upstream. The recent change of -funsigned-char causes additions of negative numbers to become additions of large positive numbers, leading to wrong calculations of mouse movement. Change these casts to be explicitly signed, to take into account negative offsets. Fixes: 3bc753c06dd0 ("kbuild: treat char as always unsigned") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=217211 Link: https://lore.kernel.org/r/20230318133010.1285202-1-Jason@zx2c4.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-05Input: alps - fix compatibility with -funsigned-charmsizanoen
commit 754ff5060daf5a1cf4474eff9b4edeb6c17ef7ab upstream. The AlpsPS/2 code previously relied on the assumption that `char` is a signed type, which was true on x86 platforms (the only place where this driver is used) before kernel 6.2. However, on 6.2 and later, this assumption is broken due to the introduction of -funsigned-char as a new global compiler flag. Fix this by explicitly specifying the signedness of `char` when sign extending the values received from the device. Fixes: f3f33c677699 ("Input: alps - Rushmore and v7 resolution support") Signed-off-by: msizanoen <msizanoen@qtmlabs.xyz> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230320045228.182259-1-msizanoen@qtmlabs.xyz Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-11Input: ads7846 - don't check penirq immediately for 7845Luca Ellero
[ Upstream commit fa9f4275b20ec7b2a8fb05c66362d10b36f9efec ] To discard false readings, one should use "ti,penirq-recheck-delay-usecs". Checking get_pendown_state() at the beginning, most of the time fails causing malfunctioning. Fixes: ffa458c1bd9b ("spi: ads7846 driver") Signed-off-by: Luca Ellero <l.ellero@asem.it> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230126105227.47648-4-l.ellero@asem.it Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11Input: ads7846 - don't report pressure for ads7845Luca Ellero
[ Upstream commit d50584d783313c8b05b84d0b07a2142f1bde46dd ] ADS7845 doesn't support pressure. Avoid the following error reported by libinput-list-devices: "ADS7845 Touchscreen: kernel bug: device has min == max on ABS_PRESSURE". Fixes: ffa458c1bd9b ("spi: ads7846 driver") Signed-off-by: Luca Ellero <l.ellero@asem.it> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230126105227.47648-2-l.ellero@asem.it Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-22Input: i8042 - add Clevo PCX0DX to i8042 quirk tableWerner Sembach
[ Upstream commit 9c445d2637c938a800fcc8b5f0b10e60c94460c7 ] The Clevo PCX0DX/TUXEDO XP1511, need quirks for the keyboard to not be occasionally unresponsive after resume. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20230110134524.553620-1-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-22Input: i8042 - add TUXEDO devices to i8042 quirk tablesWerner Sembach
[ Upstream commit a6a87c36165e6791eeaed88025cde270536c3198 ] A lot of modern Clevo barebones have touchpad and/or keyboard issues after suspend fixable with nomux + reset + noloop + nopnp. Luckily, none of them have an external PS/2 port so this can safely be set for all of them. I'm not entirely sure if every device listed really needs all four quirks, but after testing and production use. No negative effects could be observed when setting all four. The list is quite massive as neither the TUXEDO nor the Clevo dmi strings have been very consistent historically. I tried to keep the list as short as possible without risking on missing an affected device. This is revision 3. The Clevo N150CU barebone is still removed as it might have problems with the fix and needs further investigations. The SchenkerTechnologiesGmbH System-/Board-Vendor string variations are added. This is now based in the quirk table refactor. This now also includes the additional noaux flag for the NS7xMU. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220629112725.12922-5-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Stable-dep-of: 9c445d2637c9 ("Input: i8042 - add Clevo PCX0DX to i8042 quirk table") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-22Input: i8042 - merge quirk tablesWerner Sembach
[ Upstream commit ff946268a0813c35b790dfbe07c3bfaa7bfb869c ] Merge i8042 quirk tables to reduce code duplication for devices that need more than one quirk. Before every quirk had its own table with devices needing that quirk. If a new quirk needed to be added a new table had to be created. When a device needed multiple quirks, it appeared in multiple tables. Now only one table called i8042_dmi_quirk_table exists. In it every device has one entry and required quirks are coded in the .driver_data field of the struct dmi_system_id used by this table. Multiple quirks for one device can be applied by bitwise-or of the new SERIO_QUIRK_* defines. Also align quirkable options with command line parameters and make vendor wide quirks per device overwriteable on a per device basis. The first match is honored while following matches are ignored. So when a vendor wide quirk is defined in the table, a device can inserted before and therefore ignoring the vendor wide define. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220629112725.12922-3-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Stable-dep-of: 9c445d2637c9 ("Input: i8042 - add Clevo PCX0DX to i8042 quirk table") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-22Input: i8042 - move __initconst to fix code styling warningWerner Sembach
[ Upstream commit 95a9916c909f0b1d95e24b4232b4bc38ff755415 ] Move __intconst from before i8042_dmi_laptop_table[] to after it for consistent code styling. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220629112725.12922-2-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Stable-dep-of: 9c445d2637c9 ("Input: i8042 - add Clevo PCX0DX to i8042 quirk table") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-06Revert "Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode"Dmitry Torokhov
commit 3c44e2b6cde674797b76e76d3a903a63ce8a18bb upstream. This reverts commit ac5408991ea6b06e29129b4d4861097c4c3e0d59 because it causes loss of keyboard on HP 15-da1xxx. Fixes: ac5408991ea6 ("Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode") Reported-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/824effa5-8b9a-c28a-82bb-9b0ab24623e1@kernel.org Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1206358 Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18Input: elants_i2c - properly handle the reset GPIO when power is offDouglas Anderson
[ Upstream commit a85fbd6498441694475716a4d5c65f9d3e073faf ] As can be seen in elants_i2c_power_off(), we want the reset GPIO asserted when power is off. The reset GPIO is active low so we need the reset line logic low when power is off to avoid leakage. We have a problem, though, at probe time. At probe time we haven't powered the regulators on yet but we have: devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW); While that _looks_ right, it turns out that it's not. The GPIOD_OUT_LOW doesn't mean to init the GPIO to low. It means init the GPIO to "not asserted". Since this is an active low GPIO that inits it to be high. Let's fix this to properly init the GPIO. Now after both probe and power off the state of the GPIO is consistent (it's "asserted" or level low). Once we fix this, we can see that at power on time we no longer to assert the reset GPIO as the first thing. The reset GPIO is _always_ asserted before powering on. Let's fix powering on to account for this. Fixes: afe10358e47a ("Input: elants_i2c - wire up regulator support") Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20221117123805.1.I9959ac561dd6e1e8e1ce7085e4de6167b27c574f@changeid Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI modeAman Dhoot
[ Upstream commit ac5408991ea6b06e29129b4d4861097c4c3e0d59 ] The device works fine in native RMI mode, there is no reason to use legacy PS/2 mode with it. Signed-off-by: Aman Dhoot <amandhoot12@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25Input: i8042 - fix leaking of platform device on module removalChen Jun
[ Upstream commit 81cd7e8489278d28794e7b272950c3e00c344e44 ] Avoid resetting the module-wide i8042_platform_device pointer in i8042_probe() or i8042_remove(), so that the device can be properly destroyed by i8042_exit() on module unload. Fixes: 9222ba68c3f4 ("Input: i8042 - add deferred probe support") Signed-off-by: Chen Jun <chenjun102@huawei.com> Link: https://lore.kernel.org/r/20221109034148.23821-1-chenjun102@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26Input: xpad - fix wireless 360 controller breaking after suspendCameron Gutman
commit a17b9841152e7f4621619902b347e2cc39c32996 upstream. Suspending and resuming the system can sometimes cause the out URB to get hung after a reset_resume. This causes LED setting and force feedback to break on resume. To avoid this, just drop the reset_resume callback so the USB core rebinds xpad to the wireless pads on resume if a reset happened. A nice side effect of this change is the LED ring on wireless controllers is now set correctly on system resume. Cc: stable@vger.kernel.org Fixes: 4220f7db1e42 ("Input: xpad - workaround dead irq_out after suspend/ resume") Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Link: https://lore.kernel.org/r/20220818154411.510308-3-rojtberg@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26Input: xpad - add supported devices as contributed on githubPavel Rojtberg
commit b382c5e37344883dc97525d05f1f6b788f549985 upstream. This is based on multiple commits at https://github.com/paroj/xpad Cc: stable@vger.kernel.org Signed-off-by: Jasper Poppe <jgpoppe@gmail.com> Signed-off-by: Jeremy Palmer <jpalmer@linz.govt.nz> Signed-off-by: Ruineka <ruinairas1992@gmail.com> Signed-off-by: Cleber de Mattos Casali <clebercasali@gmail.com> Signed-off-by: Kyle Gospodnetich <me@kylegospodneti.ch> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Link: https://lore.kernel.org/r/20220818154411.510308-2-rojtberg@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-05Input: melfas_mip4 - fix return value check in mip4_probe()Yang Yingliang
[ Upstream commit a54dc27bd25f20ee3ea2009584b3166d25178243 ] devm_gpiod_get_optional() may return ERR_PTR(-EPROBE_DEFER), add a minus sign to fix it. Fixes: 6ccb1d8f78bd ("Input: add MELFAS MIP4 Touchscreen driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220924030715.1653538-1-yangyingliang@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-20Input: iforce - add support for Boeder Force Feedback WheelGreg Tulli
[ Upstream commit 9c9c71168f7979f3798b61c65b4530fbfbcf19d1 ] Add a new iforce_device entry to support the Boeder Force Feedback Wheel device. Signed-off-by: Greg Tulli <greg.iforce@gmail.com> Link: https://lore.kernel.org/r/3256420-c8ac-31b-8499-3c488a9880fd@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15Input: rk805-pwrkey - fix module autoloadingPeter Robinson
[ Upstream commit 99077ad668ddd9b4823cc8ce3f3c7a3fc56f6fd9 ] Add the module alias so the rk805-pwrkey driver will autoload when built as a module. Fixes: 5a35b85c2d92 ("Input: add power key driver for Rockchip RK805 PMIC") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20220612225437.3628788-1-pbrobinson@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flagMathias Nyman
commit c42e65664390be7c1ef3838cd84956d3a2739d60 upstream. The bcm5974 driver does the allocation and dma mapping of the usb urb data buffer, but driver does not set the URB_NO_TRANSFER_DMA_MAP flag to let usb core know the buffer is already mapped. usb core tries to map the already mapped buffer, causing a warning: "xhci_hcd 0000:00:14.0: rejecting DMA map of vmalloc memory" Fix this by setting the URB_NO_TRANSFER_DMA_MAP, letting usb core know buffer is already mapped by bcm5974 driver Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=215890 Link: https://lore.kernel.org/r/20220606113636.588955-1-mathias.nyman@linux.intel.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-14Input: sparcspkr - fix refcount leak in bbc_beep_probeMiaoqian Lin
[ Upstream commit c8994b30d71d64d5dcc9bc0edbfdf367171aa96f ] of_find_node_by_path() calls of_find_node_opts_by_path(), which returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: 9c1a5077fdca ("input: Rewrite sparcspkr device probing.") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220516081018.42728-1-linmq006@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25Input: stmfts - fix reference leak in stmfts_input_openZheng Yongjun
[ Upstream commit 26623eea0da3476446909af96c980768df07bbd9 ] pm_runtime_get_sync() will increment pm usage counter even it failed. Forgetting to call pm_runtime_put_noidle will result in reference leak in stmfts_input_open, so we should fix it. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20220317131604.53538-1-zhengyongjun3@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25Input: add bounds checking to input_set_capability()Jeff LaBundy
[ Upstream commit 409353cbe9fe48f6bc196114c442b1cff05a39bc ] Update input_set_capability() to prevent kernel panic in case the event code exceeds the bitmap for the given event type. Suggested-by: Tomasz Moń <tomasz.mon@camlingroup.com> Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Tomasz Moń <tomasz.mon@camlingroup.com> Link: https://lore.kernel.org/r/20220320032537.545250-1-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"José Expósito
commit 8b188fba75195745026e11d408e4a7e94e01d701 upstream. This reverts commit 37ef4c19b4c659926ce65a7ac709ceaefb211c40. The touchpad present in the Dell Precision 7550 and 7750 laptops reports a HID_DG_BUTTONTYPE of type MT_BUTTONTYPE_CLICKPAD. However, the device is not a clickpad, it is a touchpad with physical buttons. In order to fix this issue, a quirk for the device was introduced in libinput [1] [2] to disable the INPUT_PROP_BUTTONPAD property: [Precision 7x50 Touchpad] MatchBus=i2c MatchUdevType=touchpad MatchDMIModalias=dmi:*svnDellInc.:pnPrecision7?50* AttrInputPropDisable=INPUT_PROP_BUTTONPAD However, because of the change introduced in 37ef4c19b4 ("Input: clear BTN_RIGHT/MIDDLE on buttonpads") the BTN_RIGHT key bit is not mapped anymore breaking the device right click button and making impossible to workaround it in user space. In order to avoid breakage on other present or future devices, revert the patch causing the issue. Signed-off-by: José Expósito <jose.exposito89@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220321184404.20025-1-jose.exposito89@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-23Input: aiptek - properly check endpoint typePavel Skripkin
commit 5600f6986628dde8881734090588474f54a540a8 upstream. Syzbot reported warning in usb_submit_urb() which is caused by wrong endpoint type. There was a check for the number of endpoints, but not for the type of endpoint. Fix it by replacing old desc.bNumEndpoints check with usb_find_common_endpoints() helper for finding endpoints Fail log: usb 5-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 2 PID: 48 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 Modules linked in: CPU: 2 PID: 48 Comm: kworker/2:2 Not tainted 5.17.0-rc6-syzkaller-00226-g07ebd38a0da2 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Workqueue: usb_hub_wq hub_event ... Call Trace: <TASK> aiptek_open+0xd5/0x130 drivers/input/tablet/aiptek.c:830 input_open_device+0x1bb/0x320 drivers/input/input.c:629 kbd_connect+0xfe/0x160 drivers/tty/vt/keyboard.c:1593 Fixes: 8e20cf2bce12 ("Input: aiptek - fix crash on detecting device without endpoints") Reported-and-tested-by: syzbot+75cccf2b7da87fb6f84b@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20220308194328.26220-1-paskripkin@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08Input: elan_i2c - fix regulator enable count imbalance after suspend/resumeHans de Goede
commit 04b7762e37c95d9b965d16bb0e18dbd1fa2e2861 upstream. Before these changes elan_suspend() would only disable the regulator when device_may_wakeup() returns false; whereas elan_resume() would unconditionally enable it, leading to an enable count imbalance when device_may_wakeup() returns true. This triggers the "WARN_ON(regulator->enable_count)" in regulator_put() when the elan_i2c driver gets unbound, this happens e.g. with the hot-plugable dock with Elan I2C touchpad for the Asus TF103C 2-in-1. Fix this by making the regulator_enable() call also be conditional on device_may_wakeup() returning false. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220131135436.29638-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08Input: elan_i2c - move regulator_[en|dis]able() out of elan_[en|dis]able_power()Hans de Goede
commit 81a36d8ce554b82b0a08e2b95d0bd44fcbff339b upstream. elan_disable_power() is called conditionally on suspend, where as elan_enable_power() is always called on resume. This leads to an imbalance in the regulator's enable count. Move the regulator_[en|dis]able() calls out of elan_[en|dis]able_power() in preparation of fixing this. No functional changes intended. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220131135436.29638-1-hdegoede@redhat.com [dtor: consolidate elan_[en|dis]able() into elan_set_power()] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08Input: clear BTN_RIGHT/MIDDLE on buttonpadsJosé Expósito
[ Upstream commit 37ef4c19b4c659926ce65a7ac709ceaefb211c40 ] Buttonpads are expected to map the INPUT_PROP_BUTTONPAD property bit and the BTN_LEFT key bit. As explained in the specification, where a device has a button type value of 0 (click-pad) or 1 (pressure-pad) there should not be discrete buttons: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/touchpad-windows-precision-touchpad-collection#device-capabilities-feature-report However, some drivers map the BTN_RIGHT and/or BTN_MIDDLE key bits even though the device is a buttonpad and therefore does not have those buttons. This behavior has forced userspace applications like libinput to implement different workarounds and quirks to detect buttonpads and offer to the user the right set of features and configuration options. For more information: https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/726 In order to avoid this issue clear the BTN_RIGHT and BTN_MIDDLE key bits when the input device is register if the INPUT_PROP_BUTTONPAD property bit is set. Notice that this change will not affect udev because it does not check for buttons. See systemd/src/udev/udev-builtin-input_id.c. List of known affected hardware: - Chuwi AeroBook Plus - Chuwi Gemibook - Framework Laptop - GPD Win Max - Huawei MateBook 2020 - Prestigio Smartbook 141 C2 - Purism Librem 14v1 - StarLite Mk II - AMI firmware - StarLite Mk II - Coreboot firmware - StarLite Mk III - AMI firmware - StarLite Mk III - Coreboot firmware - StarLabTop Mk IV - AMI firmware - StarLabTop Mk IV - Coreboot firmware - StarBook Mk V Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Link: https://lore.kernel.org/r/20220208174806.17183-1-jose.exposito89@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-05Input: spaceball - fix parsing of movement data packetsLeo L. Schwab
commit bc7ec91718c49d938849697cfad98fcd9877cc26 upstream. The spaceball.c module was not properly parsing the movement reports coming from the device. The code read axis data as signed 16-bit little-endian values starting at offset 2. In fact, axis data in Spaceball movement reports are signed 16-bit big-endian values starting at offset 3. This was determined first by visually inspecting the data packets, and later verified by consulting: http://spacemice.org/pdf/SpaceBall_2003-3003_Protocol.pdf If this ever worked properly, it was in the time before Git... Signed-off-by: Leo L. Schwab <ewhac@ewhac.org> Link: https://lore.kernel.org/r/20211221101630.1146385-1-ewhac@ewhac.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-05Input: appletouch - initialize work before device registrationPavel Skripkin
commit 9f3ccdc3f6ef10084ceb3a47df0961bec6196fd0 upstream. Syzbot has reported warning in __flush_work(). This warning is caused by work->func == NULL, which means missing work initialization. This may happen, since input_dev->close() calls cancel_work_sync(&dev->work), but dev->work initalization happens _after_ input_register_device() call. So this patch moves dev->work initialization before registering input device Fixes: 5a6eb676d3bc ("Input: appletouch - improve powersaving for Geyser3 devices") Reported-and-tested-by: syzbot+b88c5eae27386b252bbd@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20211230141151.17300-1-paskripkin@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-05Input: i8042 - enable deferred probe quirk for ASUS UM325UASamuel Čavoj
[ Upstream commit 44ee250aeeabb28b52a10397ac17ffb8bfe94839 ] The ASUS UM325UA suffers from the same issue as the ASUS UX425UA, which is a very similar laptop. The i8042 device is not usable immediately after boot and fails to initialize, requiring a deferred retry. Enable the deferred probe quirk for the UM325UA. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1190256 Signed-off-by: Samuel Čavoj <samuel@cavoj.net> Link: https://lore.kernel.org/r/20211204015615.232948-1-samuel@cavoj.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-05Input: i8042 - add deferred probe supportTakashi Iwai
[ Upstream commit 9222ba68c3f4065f6364b99cc641b6b019ef2d42 ] We've got a bug report about the non-working keyboard on ASUS ZenBook UX425UA. It seems that the PS/2 device isn't ready immediately at boot but takes some seconds to get ready. Until now, the only workaround is to defer the probe, but it's available only when the driver is a module. However, many distros, including openSUSE as in the original report, build the PS/2 input drivers into kernel, hence it won't work easily. This patch adds the support for the deferred probe for i8042 stuff as a workaround of the problem above. When the deferred probe mode is enabled and the device couldn't be probed, it'll be repeated with the standard deferred probe mechanism. The deferred probe mode is enabled either via the new option i8042.probe_defer or via the quirk table entry. As of this patch, the quirk table contains only ASUS ZenBook UX425UA. The deferred probe part is based on Fabio's initial work. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1190256 Signed-off-by: Takashi Iwai <tiwai@suse.de> Tested-by: Samuel Čavoj <samuel@cavoj.net> Link: https://lore.kernel.org/r/20211117063757.11380-1-tiwai@suse.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29Input: atmel_mxt_ts - fix double free in mxt_read_info_blockJosé Expósito
commit 12f247ab590a08856441efdbd351cf2cc8f60a2d upstream. The "id_buf" buffer is stored in "data->raw_info_block" and freed by "mxt_free_object_table" in case of error. Return instead of jumping to avoid a double free. Addresses-Coverity-ID: 1474582 ("Double free") Fixes: 068bdb67ef74 ("Input: atmel_mxt_ts - fix the firmware update") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Link: https://lore.kernel.org/r/20211212194257.68879-1-jose.exposito89@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22Input: touchscreen - avoid bitwise vs logical OR warningNathan Chancellor
commit a02dcde595f7cbd240ccd64de96034ad91cffc40 upstream. A new warning in clang points out a few places in this driver where a bitwise OR is being used with boolean types: drivers/input/touchscreen.c:81:17: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This use of a bitwise OR is intentional, as bitwise operations do not short circuit, which allows all the calls to touchscreen_get_prop_u32() to happen so that the last parameter is initialized while coalescing the results of the calls to make a decision after they are all evaluated. To make this clearer to the compiler, use the '|=' operator to assign the result of each touchscreen_get_prop_u32() call to data_present, which keeps the meaning of the code the same but makes it obvious that every one of these calls is expected to happen. Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reported-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20211014205757.3474635-1-nathan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26Input: i8042 - Add quirk for Fujitsu Lifebook T725Takashi Iwai
commit 16e28abb7290c4ca3b3a0f333ba067f34bb18c86 upstream. Fujitsu Lifebook T725 laptop requires, like a few other similar models, the nomux and notimeout options to probe the touchpad properly. This patch adds the corresponding quirk entries. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1191980 Tested-by: Neal Gompa <ngompa13@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20211103070019.13374-1-tiwai@suse.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26Input: elantench - fix misreporting trackpoint coordinatesPhoenix Huang
commit be896bd3b72b44126c55768f14c22a8729b0992e upstream. Some firmwares occasionally report bogus data from trackpoint, with X or Y displacement being too large (outside of [-127, 127] range). Let's drop such packets so that we do not generate jumps. Signed-off-by: Phoenix Huang <phoenix@emc.com.tw> Tested-by: Yufei Du <yufeidu@cs.unc.edu> Link: https://lore.kernel.org/r/20210729010940.5752-1-phoenix@emc.com.tw Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20Input: xpad - add support for another USB ID of Nacon GC-100Michael Cullen
commit 3378a07daa6cdd11e042797454c706d1c69f9ca6 upstream. The Nacon GX100XF is already mapped, but it seems there is a Nacon GC-100 (identified as NC5136Wht PCGC-100WHITE though I believe other colours exist) with a different USB ID when in XInput mode. Signed-off-by: Michael Cullen <michael@michaelcullen.name> Link: https://lore.kernel.org/r/20211015192051.5196-1-michael@michaelcullen.name Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20Input: hideep - fix the uninitialized use in hideep_nvm_unlock()Yizhuo Zhai
[ Upstream commit cac7100d4c51c04979dacdfe6c9a5e400d3f0a27 ] Inside function hideep_nvm_unlock(), variable "unmask_code" could be uninitialized if hideep_pgm_r_reg() returns error, however, it is used in the later if statement after an "and" operation, which is potentially unsafe. Signed-off-by: Yizhuo <yzhai003@ucr.edu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20Input: hil_kbd - fix error return code in hil_dev_connect()Zhen Lei
[ Upstream commit d9b576917a1d0efa293801a264150a1b37691617 ] Return error code -EINVAL rather than '0' when the combo devices are not supported. Fixes: fa71c605c2bb ("Input: combine hil_kbd and hil_ptr drivers") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210515030053.6824-1-thunder.leizhen@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20Input: joydev - prevent use of not validated data in JSIOCSBTNMAP ioctlAlexander Larkin
commit f8f84af5da9ee04ef1d271528656dac42a090d00 upstream. Even though we validate user-provided inputs we then traverse past validated data when applying the new map. The issue was originally discovered by Murray McAllister with this simple POC (if the following is executed by an unprivileged user it will instantly panic the system): int main(void) { int fd, ret; unsigned int buffer[10000]; fd = open("/dev/input/js0", O_RDONLY); if (fd == -1) printf("Error opening file\n"); ret = ioctl(fd, JSIOCSBTNMAP & ~IOCSIZE_MASK, &buffer); printf("%d\n", ret); } The solution is to traverse internal buffer which is guaranteed to only contain valid date when constructing the map. Fixes: 182d679b2298 ("Input: joydev - prevent potential read overflow in ioctl") Fixes: 999b874f4aa3 ("Input: joydev - validate axis/button maps before clobbering current ones") Reported-by: Murray McAllister <murray.mcallister@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Alexander Larkin <avlarkin82@gmail.com> Link: https://lore.kernel.org/r/20210620120030.1513655-1-avlarkin82@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20Input: usbtouchscreen - fix control-request directionsJohan Hovold
commit 41e81022a04a0294c55cfa7e366bc14b9634c66e upstream. The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Fix the four control requests which erroneously used usb_rcvctrlpipe(). Fixes: 1d3e20236d7a ("[PATCH] USB: usbtouchscreen: unified USB touchscreen driver") Fixes: 24ced062a296 ("usbtouchscreen: add support for DMC TSC-10/25 devices") Fixes: 9e3b25837a20 ("Input: usbtouchscreen - add support for e2i touchscreen controller") Signed-off-by: Johan Hovold <johan@kernel.org> Cc: stable@vger.kernel.org # 2.6.17 Link: https://lore.kernel.org/r/20210524092048.4443-1-johan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-22Input: silead - add workaround for x86 BIOS-es which bring the chip up in a ↵Hans de Goede
stuck state [ Upstream commit e479187748a8f151a85116a7091c599b121fdea5 ] Some buggy BIOS-es bring up the touchscreen-controller in a stuck state where it blocks the I2C bus. Specifically this happens on the Jumper EZpad 7 tablet model. After much poking at this problem I have found that the following steps are necessary to unstuck the chip / bus: 1. Turn off the Silead chip. 2. Try to do an I2C transfer with the chip, this will fail in response to which the I2C-bus-driver will call: i2c_recover_bus() which will unstuck the I2C-bus. Note the unstuck-ing of the I2C bus only works if we first drop the chip of the bus by turning it off. 3. Turn the chip back on. On the x86/ACPI systems were this problem is seen, step 1. and 3. require making ACPI calls and dealing with ACPI Power Resources. This commit adds a workaround which runtime-suspends the chip to turn it off, leaving it up to the ACPI subsystem to deal with all the ACPI specific details. There is no good way to detect this bug, so the workaround gets activated by a new "silead,stuck-controller-bug" boolean device-property. Since this is only used on x86/ACPI, this will be set by model specific device-props set by drivers/platform/x86/touchscreen_dmi.c. Therefor this new device-property is not documented in the DT-bindings. Dmesg will contain the following messages on systems where the workaround is activated: [ 54.309029] silead_ts i2c-MSSL1680:00: [Firmware Bug]: Stuck I2C bus: please ignore the next 'controller timed out' error [ 55.373593] i2c_designware 808622C1:04: controller timed out [ 55.582186] silead_ts i2c-MSSL1680:00: Silead chip ID: 0x80360000 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210405202745.16777-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22Input: elants_i2c - do not bind to i2c-hid compatible ACPI instantiated devicesHans de Goede
[ Upstream commit 65299e8bfb24774e6340e93ae49f6626598917c8 ] Several users have been reporting that elants_i2c gives several errors during probe and that their touchscreen does not work on their Lenovo AMD based laptops with a touchscreen with a ELAN0001 ACPI hardware-id: [ 0.550596] elants_i2c i2c-ELAN0001:00: i2c-ELAN0001:00 supply vcc33 not found, using dummy regulator [ 0.551836] elants_i2c i2c-ELAN0001:00: i2c-ELAN0001:00 supply vccio not found, using dummy regulator [ 0.560932] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121 [ 0.562427] elants_i2c i2c-ELAN0001:00: software reset failed: -121 [ 0.595925] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121 [ 0.597974] elants_i2c i2c-ELAN0001:00: software reset failed: -121 [ 0.621893] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121 [ 0.622504] elants_i2c i2c-ELAN0001:00: software reset failed: -121 [ 0.632650] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (4d 61 69 6e): -121 [ 0.634256] elants_i2c i2c-ELAN0001:00: boot failed: -121 [ 0.699212] elants_i2c i2c-ELAN0001:00: invalid 'hello' packet: 00 00 ff ff [ 1.630506] elants_i2c i2c-ELAN0001:00: Failed to read fw id: -121 [ 1.645508] elants_i2c i2c-ELAN0001:00: unknown packet 00 00 ff ff Despite these errors, the elants_i2c driver stays bound to the device (it returns 0 from its probe method despite the errors), blocking the i2c-hid driver from binding. Manually unbinding the elants_i2c driver and binding the i2c-hid driver makes the touchscreen work. Check if the ACPI-fwnode for the touchscreen contains one of the i2c-hid compatiblity-id strings and if it has the I2C-HID spec's DSM to get the HID descriptor address, If it has both then make elants_i2c not bind, so that the i2c-hid driver can bind. This assumes that non of the (older) elan touchscreens which actually need the elants_i2c driver falsely advertise an i2c-hid compatiblity-id + DSM in their ACPI-fwnodes. If some of them actually do have this false advertising, then this change may lead to regressions. While at it also drop the unnecessary DEVICE_NAME prefixing of the "I2C check functionality error", dev_err already outputs the driver-name. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207759 Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210405202756.16830-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-28Input: i8042 - fix Pegatron C15B ID entryArnd Bergmann
commit daa58c8eec0a65ac8e2e77ff3ea8a233d8eec954 upstream. The Zenbook Flip entry that was added overwrites a previous one because of a typo: In file included from drivers/input/serio/i8042.h:23, from drivers/input/serio/i8042.c:131: drivers/input/serio/i8042-x86ia64io.h:591:28: error: initialized field overwritten [-Werror=override-init] 591 | .matches = { | ^ drivers/input/serio/i8042-x86ia64io.h:591:28: note: (near initialization for 'i8042_dmi_noselftest_table[0].matches') Add the missing separator between the two. Fixes: b5d6e7ab7fe7 ("Input: i8042 - add ASUS Zenbook Flip to noselftest list") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Marcos Paulo de Souza <mpdesouza@suse.com> Link: https://lore.kernel.org/r/20210323130623.2302402-1-arnd@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-28Input: s6sy761 - fix coordinate read bit shiftCaleb Connolly
commit 30b3f68715595dee7fe4d9bd91a2252c3becdf0a upstream. The touch coordinate register contains the following: byte 3 byte 2 byte 1 +--------+--------+ +-----------------+ +-----------------+ | | | | | | | | X[3:0] | Y[3:0] | | Y[11:4] | | X[11:4] | | | | | | | | +--------+--------+ +-----------------+ +-----------------+ Bytes 2 and 1 need to be shifted left by 4 bits, the least significant nibble of each is stored in byte 3. Currently they are only being shifted by 3 causing the reported coordinates to be incorrect. This matches downstream examples, and has been confirmed on my device (OnePlus 7 Pro). Fixes: 0145a7141e59 ("Input: add support for the Samsung S6SY761 touchscreen") Signed-off-by: Caleb Connolly <caleb@connolly.tech> Reviewed-by: Andi Shyti <andi@etezian.org> Link: https://lore.kernel.org/r/20210305185710.225168-1-caleb@connolly.tech Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-28Input: nspire-keypad - enable interrupts only when openedFabian Vogt
[ Upstream commit 69d5ff3e9e51e23d5d81bf48480aa5671be67a71 ] The driver registers an interrupt handler in _probe, but didn't configure them until later when the _open function is called. In between, the keypad can fire an IRQ due to touchpad activity, which the handler ignores. This causes the kernel to disable the interrupt, blocking the keypad from working. Fix this by disabling interrupts before registering the handler. Additionally, disable them in _close, so that they're only enabled while open. Fixes: fc4f31461892 ("Input: add TI-Nspire keypad support") Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de> Link: https://lore.kernel.org/r/3383725.iizBOSrK1V@linux-e202.suse.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04Input: i8042 - add ASUS Zenbook Flip to noselftest listMarcos Paulo de Souza
commit b5d6e7ab7fe7d186878142e9fc1a05e4c3b65eb9 upstream. After commit 77b425399f6d ("Input: i8042 - use chassis info to skip selftest on Asus laptops"), all modern Asus laptops have the i8042 selftest disabled. It has done by using chassys type "10" (laptop). The Asus Zenbook Flip suffers from similar suspend/resume issues, but it _sometimes_ work and sometimes it doesn't. Setting noselftest makes it work reliably. In this case, we need to add chassis type "31" (convertible) in order to avoid selftest in this device. Reported-by: Ludvig Norgren Guldhag <ludvigng@gmail.com> Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com> Link: https://lore.kernel.org/r/20210219164638.761-1-mpdesouza@suse.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04Input: joydev - prevent potential read overflow in ioctlDan Carpenter
commit 182d679b2298d62bf42bb14b12a8067b8e17b617 upstream. The problem here is that "len" might be less than "joydev->nabs" so the loops which verfy abspam[i] and keypam[] might read beyond the buffer. Fixes: 999b874f4aa3 ("Input: joydev - validate axis/button maps before clobbering current ones") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YCyzR8WvFRw4HWw6@mwanda [dtor: additional check for len being even in joydev_handle_JSIOCSBTNMAP] Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04Input: xpad - add support for PowerA Enhanced Wired Controller for Xbox ↵Olivier Crête
Series X|S commit 42ffcd1dba1796bcda386eb6f260df9fc23c90af upstream. Signed-off-by: Olivier Crête <olivier.crete@ocrete.ca> Link: https://lore.kernel.org/r/20210204005318.615647-1-olivier.crete@collabora.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04Input: raydium_ts_i2c - do not send zero lengthjeffrey.lin
commit fafd320ae51b9c72d371585b2501f86640ea7b7d upstream. Add default write command package to prevent i2c quirk error of zero data length as Raydium touch firmware update is executed. Signed-off-by: jeffrey.lin <jeffrey.lin@rad-ic.com> Link: https://lore.kernel.org/r/1608031217-7247-1-git-send-email-jeffrey.lin@raydium.corp-partner.google.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04Input: elo - fix an error code in elo_connect()Dan Carpenter
[ Upstream commit 0958351e93fa0ac142f6dd8bd844441594f30a57 ] If elo_setup_10() fails then this should return an error code instead of success. Fixes: fae3006e4b42 ("Input: elo - add support for non-pressure-sensitive touchscreens") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YBKFd5CvDu+jVmfW@mwanda Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04Input: sur40 - fix an error code in sur40_probe()Dan Carpenter
[ Upstream commit b0b7d2815839024e5181bd2572f5d8d4f65363b3 ] If v4l2_ctrl_handler_setup() fails then probe() should return an error code instead of returning success. Fixes: cee1e3e2ef39 ("media: add video control handlers using V4L2 control framework") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YBKFkbATXa5fA3xj@mwanda Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.3 (git 2.53.0) at 2026-04-18 12:10:11 +0000