| Age | Commit message (Collapse) | Author |
|---|
|
Add a configuration for all CSI lanes into D-PHY bus mode on Qualcomm
SM8650 CAMSS CSIPHY IPs.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add the basic support of CAMSS IP on Qualcomm SM8650 SoC powered boards.
SM8650 CAMSS provides:
- 6 x CSIPHY,
- 3 x CSID, 2 x CSID Lite,
- 3 x VFE, 2 x VFE Lite.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
On hardware architectures where a single CAMNOC module is split into
two, one for each of the real time (RT) and non real time (NRT) modules
within camera sub system, processing VFE output over the AXI bus
requires enabling and setting the appropriate clock rate for the RT
CAMNOC. This change lays the groundwork for supporting such
configurations.
Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vijay Kumar Tumati <vijay.tumati@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Replace the hardcoded buffer count value with a macro to enable
operating on these buffers elsewhere in the CAMSS driver based on this
count. Some of the hardware architectures require deferring the AUP and
REG update until after the CSID configuration and this macro is expected
to be useful in such scenarios.
Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The driver has never supported anything but OF probing so drop the
unused platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add sanity check in iris_vb2_stop_streaming. If inst->state is
already IRIS_INST_ERROR, we should skip the stream_off operation
because it would still send packets to the firmware.
In iris_kill_session, inst->state is set to IRIS_INST_ERROR and
session_close is executed, which will kfree(inst_hfi_gen2->packet).
If stop_streaming is called afterward, it will cause a crash.
Fixes: 11712ce70f8e5 ("media: iris: implement vb2 streaming ops")
Cc: stable@vger.kernel.org
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
[bod: remove qcom from patch title]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Improve the condition used to determine when input internal buffers need
to be reconfigured during streamon on the capture port. Previously, the
check relied on the INPUT_PAUSE sub-state, which was also being set
during seek operations. This led to input buffers being queued multiple
times to the firmware, causing session errors due to duplicate buffer
submissions.
This change introduces a more accurate check using the FIRST_IPSC and
DRC sub-states to ensure that input buffer reconfiguration is triggered
only during resolution change scenarios, such as streamoff/on on the
capture port. This avoids duplicate buffer queuing during seek
operations.
Fixes: c1f8b2cc72ec ("media: iris: handle streamoff/on from client in dynamic resolution change")
Cc: stable@vger.kernel.org
Reported-by: Val Packett <val@packett.cool>
Closes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/4700
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The iris_v4l2_file_ops structure is never modified. Make it const.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
[bod: drop qcom from patch title for consistency with other patches]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
As a part of migrating code from the old Venus driver to the new Iris
one, add support for the SC7280 platform. It is very similar to SM8250,
but it (currently) uses no reset controls (there is an optional
GCC-generated reset, it will be added later) and no AON registers
region. Extend the VPU ops to support optional clocks and skip the AON
shutdown for this platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
In preparation to adding more Gen1 platforms, which will share a
significant amount of data, rename the SM8250 platform file to
iris_platform_gen1.c.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Now as we have removed PIPE value from inst_fw_caps_dec there should be
no difference between inst_fw_caps of QCS8300 and SM8550+. Drop the
QCS8300-specific tables and use generic one instead.
The differences between QCS8300 and SM8550 data comes from a
non-conflict merge of commit d22037f3fd33 ("media: iris: Set platform
capabilities to firmware for encoder video device") (which added .set
callbacks), and commit 6bdfa3f947a7 ("media: iris: Add platform-specific
capabilities for encoder video device") (which added QCS8300 data, but
not the callbacks).
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The value of the PIPE property depends on the number of pipes available
on the platform and is frequently the only difference between several
fw_caps. In order to reduce duplication, use num_vpp_pipe from the
iris_platform_data rather than hardcoding the value into the fw_cap.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
[bod: duplciation -> duplication]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Make all struct iris_platform_data instances constant, they are not
modified at runtime.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Make all struct platform_inst_fw_cap instances constant, they are not
modified at runtime.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Introduce handling for the QC08C format in the encoder. QC08C
format is NV12 with UBWC compression. Update format checks and
configuration to enable encoding to QC08C streams.
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Introduce handling for the QC08C format in the decoder. QC08C format is
NV12 with UBWC compression. Update format checks and configuration to
enable decoding of QC08C streams.
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add handling for the HFI_PROP_OPB_ENABLE property, which allows enabling
or disabling split mode in the firmware. When HFI_PROP_OPB_ENABLE is set
to true, the firmware activates split mode for output picture buffers
(OPB). The OPB format is determined by the HFI_PROP_COLOR_FORMAT
property, supporting NV12 or QC08C formats.
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The driver has never supported anything but OF probing so drop the
unused platform module aliases.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The encoder and decoder platform devices are registered by the venus
driver as children of the venus device, but even if someone were to mess
this up no amount of probe deferring is going to conjure up a parent.
Relatedly, the venus driver sets its driver data before registering the
child devices and if this ever breaks we want to learn about it by
failing probe.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Use the newly added of_reserved_mem_region_to_resource() function to
handle "memory-region" properties.
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Reviewed-by: Ming Qian <ming.qian@oss.nxp.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The DRIVER_AUTHOR macro incorrectly included a semicolon in its
string literal definition. Right now, this wasn't causing any real
problem, but coming changes to the MODULE_INFO() macro make this more
sensitive. Specifically, when used with MODULE_AUTHOR(), this created
syntax errors during macro expansion:
MODULE_AUTHOR(DRIVER_AUTHOR);
expands to:
MODULE_INFO(author, "Joonyoung Shim <jy0922.shim@samsung.com>";)
^
syntax error
Remove the trailing semicolon from the DRIVER_AUTHOR definition.
Semicolons should only appear at the point of use, not in the macro
definition.
Reviewed-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
|
|
The firmware filename macros incorrectly included semicolons in their
string literal definitions. Right now, this wasn't causing any real
problem, but coming changes to the MODULE_INFO() macro make this more
sensitive. Specifically, when used with MODULE_FIRMWARE(), this
created syntax errors during macro expansion:
MODULE_FIRMWARE(LME2510_C_S7395);
expands to:
MODULE_INFO(firmware, "dvb-usb-lme2510c-s7395.fw";)
^
syntax error
Remove the trailing semicolons from all six firmware filename macro
definitions. Semicolons should only appear at the point of use, not in
the macro definition.
Reviewed-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
|
|
syzbot reported a uninit-value in pctv452e_i2c_msg. [1]
When the snd_len or rcv_len check fails and jumps to failed, buf is
uninitialized, triggering the uninit-value issue.
Move the snd/rcv length check before kmalloc, and return -EINVAL directly
if the condition is met.
[1]
BUG: KMSAN: uninit-value in hex_string+0x681/0x740 lib/vsprintf.c:1220
pctv452e_i2c_msg+0x82a/0x8f0 drivers/media/usb/dvb-usb/pctv452e.c:467
pctv452e_i2c_xfer+0x2e6/0x4c0 drivers/media/usb/dvb-usb/pctv452e.c:502
Reported-by: syzbot+480edd2cadb85ddb4bbe@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=480edd2cadb85ddb4bbe
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Use the same value (4096) for the maximum height as used for width.
The HW limits are a 4K video, but the orientation does not matter. Fixes
issues with some portrait oriented Audi displays that exceed the old
height value (2160).
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
In vb2_dc_alloc(), get_device() is called to increment the device
reference count. However, if subsequent DMA allocation fails
(vb2_dc_alloc_coherent or vb2_dc_alloc_non_coherent returns error),
the function returns without calling put_device(), causing a device
reference leak.
Add put_device() call in the error path before kfree() to properly
release the device reference acquired earlier.
Fixes: de27891f675e ("media: videobuf2: handle non-contiguous DMA allocations")
Cc: stable@vger.kernel.org
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The vbi_fops stored in struct saa7146_ext_vv is a full
v4l2_file_operations, but only its .write field is used. Replace it with
a single vbi_write function pointer to save memory.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The driver does not support anything but OF probing since
commit 47d1f33ff43e ("[media] exynos4-is: Drop drvdata handling in
fimc-lite for non-dt platforms") so drop the unused platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The driver has never supported anything but OF probing so drop the
unused platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Platform drivers can be probed after their init sections have been
discarded (e.g. on probe deferral or manual rebind through sysfs) so the
probe function must not live in init.
Note that commit ffa1b391c61b ("V4L/DVB: vpif_cap/disp: Removed section
mismatch warning") incorrectly suppressed the modpost warning.
Fixes: ffa1b391c61b ("V4L/DVB: vpif_cap/disp: Removed section mismatch warning")
Fixes: e7332e3a552f ("V4L/DVB (12176): davinci/vpif_display: Add VPIF display driver")
Cc: stable@vger.kernel.org # 2.6.32
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Platform drivers can be probed after their init sections have been
discarded (e.g. on probe deferral or manual rebind through sysfs) so the
probe function must not live in init.
Note that commit ffa1b391c61b ("V4L/DVB: vpif_cap/disp: Removed section
mismatch warning") incorrectly suppressed the modpost warning.
Fixes: ffa1b391c61b ("V4L/DVB: vpif_cap/disp: Removed section mismatch warning")
Fixes: 6ffefff5a9e7 ("V4L/DVB (12906c): V4L : vpif capture driver for DM6467")
Cc: stable@vger.kernel.org # 2.6.32
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
determine_rate()
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
v4l2_device_register_subdev_nodes() must called without taking
media_dev->graph_mutex to avoid potential AB-BA deadlock on further
subdevice driver initialization.
Fixes: fa91f1056f17 ("[media] exynos4-is: Add support for asynchronous subdevices registration")
Cc: stable@vger.kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Trivial fix to spelling mistake in comment text.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Since commit 63d00be69348fda4 ("PM: runtime: Allow unassigned
->runtime_suspend|resume callbacks"), unassigned
.runtime_{suspend,resume}() callbacks are treated the same as dummy
callbacks that just return zero.
Unassigned system sleep callbacks were always treated the same as dummy
callbacks that just return zero.
As the driver has no other PM callbacks than dummy callbacks, all PM
handling can be removed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ming Qian <ming.qian@oss.nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Convert the Renesas JPEG Processing Unit driver from an open-coded
dev_pm_ops structure to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr().
This lets us drop the check for CONFIG_PM_SLEEP, and reduces kernel size
in case CONFIG_PM or CONFIG_PM_SLEEP is disabled, while increasing build
coverage.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
rcar_drif_bond_enabled
The function calls of_parse_phandle() which returns
a device node with an incremented reference count. When the bonded device
is not available, the function
returns NULL without releasing the reference, causing a reference leak.
Add of_node_put(np) to release the device node reference.
The of_node_put function handles NULL pointers.
Found through static analysis by reviewing the doc of of_parse_phandle()
and cross-checking its usage patterns across the codebase.
Fixes: 7625ee981af1 ("[media] media: platform: rcar_drif: Add DRIF support")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The driver has never supported anything but OF probing so drop the
unused platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Martin Kepplinger-Novakovic <martink@posteo.de>
Link: https://patch.msgid.link/20251017060051.8204-3-johan@kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The driver has never supported anything but OF probing so drop the
unused platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20251017060051.8204-2-johan@kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The driver does not support anything but OF probe since commit
f0e7cfbb43f1 ("media: imx: imx7_mipi_csis: Add i.MX8MM support") so
drop the unused platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20251017060051.8204-1-johan@kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The ISI module on i.MX91 implements only one channel and one parallel
camera input. As no input source selection is required, gasket ops are
unnecessary.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20250905-isi_imx93-v2-5-37db5f768c57@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Sort platform data in the order of compatible strings in of_match table
to make it more convenient to read.
No functions changed.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20250905-isi_imx93-v2-4-37db5f768c57@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The ISI module on i.MX93 implements one camera input which can be
connected to either of MIPI CSI-2 or parallel camera. The source
type can be selected by setting camera mux control register.
Signed-off-by: Alice Yuan <alice.yuan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20250905-isi_imx93-v2-3-37db5f768c57@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Make code more readable and easier to maintain by using the FIELD_PREP
and GENMASK() macros.
While at it, replace spaces with tabs for macro indentation.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Link: https://patch.msgid.link/20250905-isi_imx93-v2-2-37db5f768c57@nxp.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
On the rkisp1 (in my case on a NXP i.MX8 M Plus) the ISP interrupt
handler is sometimes called with RKISP1_CIF_ISP_V_START (start of frame)
and RKISP1_CIF_ISP_FRAME (end of frame) being set at the same time. In
commit 8524fa22fd2f ("media: staging: rkisp1: isp: add a warning and
debugfs var for irq delay") a warning was added for that. There are two
cases where this condition can occur:
1. The v-sync and the frame-end belong to the same frame. This means,
the irq was heavily delayed and the warning is likely appropriate.
2. The v-sync belongs to the next frame. This can happen if the vertical
blanking between two frames is very short.
The current code always handles case 1 although case 2 is in my
experience the more common case and happens in regular usage. This leads
to incorrect sequence numbers on stats and params buffers which in turn
breaks the regulation in user space. Fix that by adding a frame_active
flag to distinguish between these cases and handle the start of frame
either at the beginning or at the end of the rkisp1_isp_isr().
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Link: https://patch.msgid.link/20250922182003.3712101-2-stefan.klug@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The RK3328 VDEC has a HW quirk that require QoS to be disabled when HEVC
or VP9 is decoded, otherwise the decoded picture may become corrupted.
Add a RK3328 variant with a quirk flag to disable QoS when before
decoding is started.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, RockPro64, Quartz64-B, NanoPi R5S
Tested-by: Detlev Casanova <detlev.casanova@collabora.com> # RK3399
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add a RK3288 variant, a version of the Rockchip VDEC IP that only
support HEVC decoding.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, RockPro64, Quartz64-B, NanoPi R5S
Tested-by: Detlev Casanova <detlev.casanova@collabora.com> # RK3399
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add filtering of coded formats and controls depending on a variant
capabilities.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, RockPro64, Quartz64-B, NanoPi R5S
Tested-by: Detlev Casanova <detlev.casanova@collabora.com> # RK3399
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
