| Age | Commit message (Collapse) | Author |
|---|
|
Remove fec_enet_xdp_get_tx_queue() from fec_enet_xdp_tx_xmit() and add
the tx_qid parameter to it. Then, calculate the TX queue ID for XDP_TX
frames in fec_enet_rx_queue_xdp(). This way, the TX queue ID only needs
to be calculated once for XDP_TX frames during each NAPI polling. And
since the number of RX queues and TX queues in FEC is generally equal,
the RX queue ID can be directly used as the TX queue ID. In exceptional
cases, fec_enet_xdp_get_tx_queue() is used to calculate the TX queue ID.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260205085742.2685134-8-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the processing of XDP path packets and protocol stack packets
are both mixed in fec_enet_rx_queue(), which makes the logic somewhat
confusing and debugging more difficult. Furthermore, some logic is not
needed by each other. Such as the kernel path does not need to call
xdp_init_buff(), XDP path does not support swap_buffer(), because
fec_enet_bpf() returns "-EOPNOTSUPP" for those platforms which need
swap_buffer()), and so on. This prevents XDP from achieving its maximum
performance. Therefore, XDP path packets processing has been separated
from fec_enet_rx_queue() by adding the fec_enet_rx_queue_xdp() function
to optimize XDP path logic and improve XDP performance.
The XDP performance on the iMX93 platform was compared before and after
applying this patch. Detailed results are as follows and we can see the
performance has been improved.
Env: i.MX93, packet size 64 bytes including FCS, only single core and RX
BD ring are used to receive packets, flow-control is off.
Before the patch is applied:
xdp-bench tx eth0
Summary 396,868 rx/s 0 err,drop/s
Summary 396,024 rx/s 0 err,drop/s
xdp-bench drop eth0
Summary 684,781 rx/s 0 err/s
Summary 675,746 rx/s 0 err/s
xdp-bench pass eth0
Summary 208,552 rx/s 0 err,drop/s
Summary 208,654 rx/s 0 err,drop/s
xdp-bench redirect eth0 eth0
eth0->eth0 311,210 rx/s 0 err,drop/s 311,208 xmit/s
eth0->eth0 310,808 rx/s 0 err,drop/s 310,809 xmit/s
After the patch is applied:
xdp-bench tx eth0
Summary 409,975 rx/s 0 err,drop/s
Summary 411,073 rx/s 0 err,drop/s
xdp-bench drop eth0
Summary 700,681 rx/s 0 err/s
Summary 698,102 rx/s 0 err/s
xdp-bench pass eth0
Summary 211,356 rx/s 0 err,drop/s
Summary 210,629 rx/s 0 err,drop/s
xdp-bench redirect eth0 eth0
eth0->eth0 320,351 rx/s 0 err,drop/s 320,348 xmit/s
eth0->eth0 318,988 rx/s 0 err,drop/s 318,988 xmit/s
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260205085742.2685134-7-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch has made the following adjustments to fec_enet_rx_queue().
1. The function parameters are modified to maintain the same style as
subsequently added XDP-related interfaces.
2. Some variables are initialized at the time of declaration, and the
order of local variables is updated to follow the reverse xmas tree
style.
3. Replace variable cbd_bufaddr with dma.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260205085742.2685134-6-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Extract the helper fec_build_skb() from fec_enet_rx_queue(), so that the
code for building a skb is centralized in fec_build_skb(), which makes
the code of fec_enet_rx_queue() more concise and readable.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260205085742.2685134-5-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The FEC of some platforms supports RX FIFO shift-16, it means the actual
frame data starts at bit 16 of the first word read from RX FIFO aligning
the Ethernet payload on a 32-bit boundary. The MAC writes two additional
bytes in front of each frame received into the RX FIFO. Currently, the
fec_enet_rx_queue() updates the data_start, sub_len and the rx_bytes
statistics by checking whether FEC_QUIRK_HAS_RACC is set. This makes the
code less concise, so rx_shift is added to represent the number of extra
bytes padded in front of the RX frame. Furthermore, when adding separate
RX handling functions for XDP copy mode and zero copy mode in the future,
it will no longer be necessary to check FEC_QUIRK_HAS_RACC to update the
corresponding variables.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260205085742.2685134-4-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Extract fec_rx_error_check() from fec_enet_rx_queue(), this helper is
used to check RX errors. And it will be used in XDP and XDP zero copy
paths in subsequent patches.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260205085742.2685134-3-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the workaround for FEC_QUIRK_ERR007885 has three call sites,
so add the helper fec_txq_trigger_xmit() to make the code more concise
and reusable.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260205085742.2685134-2-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The only thing this driver's init/exit functions do is call
pci_register/unregister_driver, and in the case of the init function,
print an unnecessary message. Replace them with module_pci_driver to
simplify the code.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260205070632.37516-1-enelsonmoore@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
No check for actually present hardware is being performed in the probe
function of the mxl-gsw1xx switch driver. So even if the switch isn't
present at the configured MDIO bus address the driver wrongly tells the
user that a "GSWIP version 0 mod 0" was found, outputting errors about
PHY capabilities not matching.
Read and validate the chip MANU_ID and PNUM_ID registers and output
information while probing, but return an error and abort probing in case
the hardware is not actually present.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/3194d3d3bb0b51f08755d392e1fdf7bb6dc49608.1769916962.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Configure SerDes (port 4) RX and TX polarities using the newly
introduced generic properties. The polarities are described at the port
level which equals the polarities of the external pins of the chip.
Note that the RX lane is inverted internally and the vendor driver
simply always sets bit GSW1XX_SGMII_PHY_RX0_CFG2_INVERT unconditionally
to end up with the correct (ie. as documented in datasheets) polarity at
the external pins.
In this sense, PHY_POLARITY_NORMAL denotes normal polarity for pins as
documented for the MRQFN 105-pin package (GSW120, GSW125, GSW140, GSW141
and GSW145 all use the same package and have identical pin layouts
except for TP port 2 and 3 being N/C on GSW12x):
pin B18 (TX0_P) positive signal of the differential SGMII data output pair
pin B19 (TX0_M) negative signal of the differential SGMII data output pair
pin B20 (RX0_P) positive signal of the differential SGMII data input pair
pin B21 (RX0_M) negative signal of the differential SGMII data input pair
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/8bf79b3476e23673fceffbe2bc9d6abc13d132e5.1769916962.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Count and report HW-GRO stats as seen by the kernel.
The device stats for GRO seem to not reflect the reality,
perhaps they count sessions which did not actually result
in any aggregation. Also they count wire packets, so we
have to count super-frames, anyway.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260207003509.3927744-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In hns3_set_ringparam(), a temporary copy (tmp_rings) of the ring structure
is created for rollback. However, the tx_spare pointer in the original
ring handle is incorrectly left pointing to the old backup memory.
Later, if memory allocation fails in hns3_init_all_ring() during the setup,
the error path attempts to free all newly allocated rings. Since tx_spare
contains a stale (non-NULL) pointer from the backup, it is mistaken for
a newly allocated buffer and is erroneously freed, leading to a double-free
of the backup memory.
The root cause is that the tx_spare field was not cleared after its value
was saved in tmp_rings, leaving a dangling pointer.
Fix this by setting tx_spare to NULL in the original ring structure
when the creation of the new `tx_spare` fails. This ensures the
error cleanup path only frees genuinely newly allocated buffers.
Fixes: 907676b130711 ("net: hns3: use tx bounce buffer for small packets")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260205121719.3285730-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the bng_en TX path, that used to check and
remove HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Link: https://patch.msgid.link/20260205133925.526371-12-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the mana TX path, that used to check and remove
HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-11-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the gve TX path, that used to check and remove
HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-10-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the bnxt_en TX path, that used to check and
remove HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260205133925.526371-9-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the ice TX path, that used to check and remove
HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-8-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the mlx4 TX path, that used to check and remove
HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-7-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the mlx5e and mlx5i TX path, that used to check
and remove HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-6-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, both the icssg-prueth and icssg-prueth-sr1 drivers create
a dedicated 'emac->cmd_wq' workqueue.
In the icssg-prueth-sr1 driver, this workqueue is not utilized at all.
In the icssg-prueth driver, the workqueue is only used to execute the
actual processing of ndo_set_rx_mode. However, creating a dedicated
workqueue for such a simple use case is unnecessary. To simplify the
code, switch to using the system default workqueue instead.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Tested-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20260205-icssg-prueth-workqueue-v2-1-cf5cf97efb37@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While compile testing on less common architectures, I noticed that gcc-10 on
s390 finds a bug that all other configurations seem to miss:
drivers/net/ethernet/myricom/myri10ge/myri10ge.c: In function 'myri10ge_set_multicast_list':
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:391:25: error: 'cmd.data0' is used uninitialized in this function [-Werror=uninitialized]
391 | buf->data0 = htonl(data->data0);
| ^~
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:392:25: error: '*((void *)&cmd+4)' is used uninitialized in this function [-Werror=uninitialized]
392 | buf->data1 = htonl(data->data1);
| ^~
drivers/net/ethernet/myricom/myri10ge/myri10ge.c: In function 'myri10ge_allocate_rings':
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:392:13: error: 'cmd.data1' is used uninitialized in this function [-Werror=uninitialized]
392 | buf->data1 = htonl(data->data1);
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:1939:22: note: 'cmd.data1' was declared here
1939 | struct myri10ge_cmd cmd;
| ^~~
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:393:13: error: 'cmd.data2' is used uninitialized in this function [-Werror=uninitialized]
393 | buf->data2 = htonl(data->data2);
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:1939:22: note: 'cmd.data2' was declared here
1939 | struct myri10ge_cmd cmd;
It would be nice to understand how to make other compilers catch this as
well, but for the moment I'll just shut up the warning by fixing the
undefined behavior in this driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260205162935.2126442-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver started using dimlib but fails to select the corresponding
symbol, which results in a link failure:
x86_64-linux-ld: drivers/net/ethernet/huawei/hinic3/hinic3_irq.o: in function `hinic3_poll':
hinic3_irq.c:(.text+0x179): undefined reference to `net_dim'
x86_64-linux-ld: drivers/net/ethernet/huawei/hinic3/hinic3_irq.o: in function `hinic3_rx_dim_work':
hinic3_irq.c:(.text+0x1fb): undefined reference to `net_dim_get_rx_moderation'
Fixes: b35a6fd37a00 ("hinic3: Add adaptive IRQ coalescing with DIM")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260205161530.1308504-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In prestera_ethtool_set_fecparam(), the error message is opposite of
the condition checking PRESTERA_PORT_TCVR_SFP. FEC configuration is
not allowed on SFP ports, but the message says "non-SFP ports", which
does not match the condition. However, FEC may be required depending on
the transceiver, cable, or mode, and firmware already validates invalid
combinations.
Remove the SFP transceiver check and let firmware handle validation.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Acked-by: Elad Nachman <enachman@marvell.com>
Link: https://patch.msgid.link/20260205091958.231413-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
AMD_XGBE currently selects NET_SELFTESTS unconditionally. Since select
does not honor dependencies, this can force-enable NET_SELFTESTS even
when INET is disabled (e.g. INET=n randconfig builds).
Fixes build issue when INET is disabled.
Fixes: 862a64c83faf ("amd-xgbe: introduce support ethtool selftest")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602030920.SWN7cwzT-lkp@intel.com/
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20260204150020.883639-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
registered yet
If an error occurs during register_netdev() for the first MAC in
cpsw_register_ports(), even though cpsw->slaves[0].ndev is set to NULL,
cpsw->slaves[1].ndev would remain unchanged. This could later cause
cpsw_unregister_ports() to attempt unregistering the second MAC.
To address this, add a check for ndev->reg_state before calling
unregister_netdev(). With this change, setting cpsw->slaves[i].ndev
to NULL becomes unnecessary and can be removed accordingly.
Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://patch.msgid.link/20260205-cpsw-error-path-v1-2-6e58bae6b299@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current error handling in cpsw_probe() has two issues:
- cpsw_unregister_ports() may be called before cpsw_register_ports() has
been executed.
- cpsw_unregister_ports() is already invoked within cpsw_register_ports()
in case of a register_netdev() failure, but the error path would call
it again.
Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://patch.msgid.link/20260205-cpsw-error-path-v1-1-6e58bae6b299@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously the HW-GRO code was using a separate page_pool for the header
buffer. The pages of the header buffer were replenished via UMR. This
mechanism has some drawbacks:
- Reference counting on the page_pool page frags is not cheap.
- UMRs have HW overhead for updating and also for access. Especially for
the KLM type which was previously used.
- UMR code for headers is complex.
This patch switches to using a static memory area (static MTT MKEY) for
the header buffer and does a header memcpy. This happens only once per
GRO session. The SKB is allocated from the per-cpu NAPI SKB cache.
Performance numbers for x86:
+---------------------------------------------------------+
| Test | Baseline | Header Copy | Change |
|---------------------+------------+-------------+--------|
| iperf3 oncpu | 59.5 Gbps | 64.00 Gbps | 7 % |
| iperf3 offcpu | 102.5 Gbps | 104.20 Gbps | 2 % |
| kperf oncpu | 115.0 Gbps | 130.00 Gbps | 12 % |
| XDP_DROP (skb mode) | 3.9 Mpps | 3.9 Mpps | 0 % |
+---------------------------------------------------------+
Notes on test:
- System: Intel(R) Xeon(R) Platinum 8380 CPU @ 2.30GHz
- oncpu: NAPI and application running on same CPU
- offcpu: NAPI and application running on different CPUs
- MTU: 1500
- iperf3 tests are single stream, 60s with IPv6 (for slightly larger
headers)
- kperf version [1]
[1] git://git.kernel.dk/kperf.git
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260204200345.1724098-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename TAUI/TBASE to GAUI/GBASE in 1600G link mode identifier and its
usage in ethtool and link-info tables.
Reported-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reported-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://patch.msgid.link/20260204194324.1723534-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Current clk_csr_i setting of Loongson STMMAC (including LS7A1000/2000
and LS2K1000/2000/3000) are copy & paste from other drivers. In fact,
Loongson STMMAC use 125MHz clocks and need 62 freq division to within
2.5MHz, meeting most PHY MDC requirement. So fix by setting clk_csr_i
to 100-150MHz, otherwise some PHYs may link fail.
Cc: stable@vger.kernel.org
Fixes: 30bba69d7db40e7 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Hongliang Wang <wanghongliang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20260203062901.2158236-1-chenhuacai@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bond_update_speed_duplex() first set speed/duplex to unknown and
then asks slave driver for current speed/duplex. Since getting
speed/duplex might take longer there is a race, where this false state
is visible by /proc/net/bonding. With commit 691b2bf14946 ("bonding:
update port speed when getting bond speed") this race gets more visible,
if user space is calling ethtool on a regular base.
Fix this by only setting speed/duplex to unknown, if link speed is
really unknown/unusable.
Fixes: 98f41f694f46 ("bonding:update speed/duplex for NETDEV_CHANGE")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20260203141153.51581-1-tbogendoerfer@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During a kexec reboot the hardware is not power-cycled, so AF state from
the old kernel can persist into the new kernel. When AF and PF drivers
are built as modules, the PF driver may probe before AF reinitializes
the hardware.
The PF driver treats the RVUM block revision as an indication that AF
initialization is complete. If this value is left uncleared at shutdown,
PF may incorrectly assume AF is ready and access stale hardware state,
leading to a crash.
Clear the RVUM block revision during AF shutdown to avoid PF
mis-detecting AF readiness after kexec.
Fixes: 54494aa5d1e6 ("octeontx2-af: Add Marvell OcteonTX2 RVU AF driver")
Signed-off-by: Anshumali Gaur <agaur@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260203050701.2616685-1-agaur@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc9).
No adjacent changes, conflicts:
drivers/net/ethernet/spacemit/k1_emac.c
3125fc1701694 ("net: spacemit: k1-emac: fix jumbo frame support")
f66086798f91f ("net: spacemit: Remove broken flow control support")
https://lore.kernel.org/aYIysFIE9ooavWia@sirena.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When looking at the iMX93 documentation, the definitions in the driver
do not correspond with the documentation, which makes the driver
confusing.
The driver, for example, re-uses a definition for bit 0 for two
different registers, where this bit have completely different purposes.
Fix this by renaming the second register, and adding a definition that
reflects the true purpose of bit 0 in the first register (EQOS enable.)
Replace MX93_GPR_ENET_QOS_INTF_MODE_MASK with MX93_GPR_ENET_QOS_ENABLE
and MX93_GPR_ENET_QOS_INTF_SEL_MASK as MX93_GPR_ENET_QOS_INTF_MODE_MASK
is not a register field.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vnaGl-00000007i9f-0ZMw@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rk3506, rk3528 and rk3588 have the rmii_mode bit in the clock GRF
register rather than the gmac GRF register. Provide a mask for this
field in the clock register, and convert these SoCs to use this.
Add the necessary code in rk_gmac_powerup() to write this field.
This allows us to get rid of these SoCs set_to_rmii() function. As
such, we need to mark these SoCs as supporting RMII mode.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYyB-00000007hpF-1dwK@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use rk_encode_wm16() for RMII clock gating control, and also for the
io_clksel bit used to select the transmit clock between CRU-derived
and IO-derived clock sources.
Both of these were configured via the "set_clock_selection" method in
the SoC specific operations, but there is no requirement to change the
io_clksel except when enabling clocks.
It is also possible that we don't need to ungate the RMII clock if we
are operating in RGMII mode, but this commit makes no change there.
Split up the configuration of these as separate functions, and remove
the set_clock_selection() method. Since these clocking bits are in the
same register that we call the "speed" register, move the logic for
writing that register into rk_write_speed_grf_reg().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYy6-00000007hp9-1AJM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RK3528 gmac0 dtsi contains:
gmac0: ethernet@ffbd0000 {
phy-handle = <&rmii0_phy>;
phy-mode = "rmii";
mdio0: mdio {
rmii0_phy: ethernet-phy@2 {
phy-is-integrated;
};
};
};
This follows the same pattern as rk3328, where this gmac instance
only supports RMII. Disable RGMII in phylink's supported_interfaces
mask for this gmac instance.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/E1vnYy1-00000007hp3-0hKm@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As detailed in a previous commit ("net: stmmac: rk: convert rk3328 to
use bsp_priv->id") rk3328 gmac2phy only supports RMII, whereas gmac2io
supports both RMII and RGMII. Clear supports_rgmii for gmac2phy.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328 gmac2io,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYxw-00000007hox-0DqH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than providing a now-empty set_to_rmii() method to indicate
that RMII is supported, switch to setting ops->supports_rmii instead.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYxq-00000007hor-3yXt@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce two boolean flags into struct rk_priv_data indicating
whether RGMII and/or RMII is supported for this instance. Use these
to configure the supported_interfaces mask for phylink, validate the
interface mode. Initialise these from equivalent flags in the
rk_gmac_ops or depending on the presence of the ops->set_to_rgmii and
ops->set_to_mii methods. Finally, make ops->set_to_* optional.
This will allow us to get rid of empty set_to_rmii() methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYxl-00000007hol-3XiH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement SyncE support for the E825-C Ethernet controller using the
DPLL subsystem. Unlike E810, the E825-C architecture relies on platform
firmware (ACPI) to describe connections between the NIC's recovered clock
outputs and external DPLL inputs.
Implement the following mechanisms to support this architecture:
1. Discovery Mechanism: The driver parses the 'dpll-pins' and 'dpll-pin names'
firmware properties to identify the external DPLL pins (parents)
corresponding to its RCLK outputs ("rclk0", "rclk1"). It uses
fwnode_dpll_pin_find() to locate these parent pins in the DPLL core.
2. Asynchronous Registration: Since the platform DPLL driver (e.g.
zl3073x) may probe independently of the network driver, utilize
the DPLL notifier chain The driver listens for DPLL_PIN_CREATED
events to detect when the parent MUX pins become available, then
registers its own Recovered Clock (RCLK) pins as children of those
parents.
3. Hardware Configuration: Implement the specific register access logic
for E825-C CGU (Clock Generation Unit) registers (R10, R11). This
includes configuring the bypass MUXes and clock dividers required to
drive SyncE signals.
4. Split Initialization: Refactor `ice_dpll_init()` to separate the
static initialization path of E810 from the dynamic, firmware-driven
path required for E825-C.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Co-developed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-10-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Update existing DPLL drivers to utilize the DPLL reference count
tracking infrastructure.
Add dpll_tracker fields to the drivers' internal device and pin
structures. Pass pointers to these trackers when calling
dpll_device_get/put() and dpll_pin_get/put().
This allows developers to inspect the specific references held by this
driver via debugfs when CONFIG_DPLL_REFCNT_TRACKER is enabled, aiding
in the debugging of resource leaks.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-9-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for the REF_TRACKER infrastructure to the DPLL subsystem.
When enabled, this allows developers to track and debug reference counting
leaks or imbalances for dpll_device and dpll_pin objects. It records stack
traces for every get/put operation and exposes this information via
debugfs at:
/sys/kernel/debug/ref_tracker/dpll_device_*
/sys/kernel/debug/ref_tracker/dpll_pin_*
The following API changes are made to support this:
1. dpll_device_get() / dpll_device_put() now accept a 'dpll_tracker *'
(which is a typedef to 'struct ref_tracker *' when enabled, or an empty
struct otherwise).
2. dpll_pin_get() / dpll_pin_put() and fwnode_dpll_pin_find() similarly
accept the tracker argument.
3. Internal registration structures now hold a tracker to associate the
reference held by the registration with the specific owner.
All existing in-tree drivers (ice, mlx5, ptp_ocp, zl3073x) are updated
to pass NULL for the new tracker argument, maintaining current behavior
while enabling future debugging capabilities.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Co-developed-by: Petr Oros <poros@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-8-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for devlink port function state get/set operations for the
host physical function (PF). Until now, mlx5 only allowed state get/set
for subfunctions (SFs) ports. This change enables an administrator with
eSwitch manager privileges to query or modify the host PF’s function
state, allowing it to be explicitly inactivated or activated. While
inactivated, the administrator can modify the functions attributes, such
as enable/disable roce.
$ devlink port show pci/0000:03:00.0/196608
pci/0000:03:00.0/196608: type eth netdev eth1 flavour pcipf controller 1 pfnum 0 external true splittable false
function:
hw_addr a0:88:c2:45:17:7c state active opstate attached roce enable max_io_eqs 120
$ devlink port function set pci/0000:03:00.0/196608 state inactive
$ devlink port show pci/0000:03:00.0/196608
pci/0000:03:00.0/196608: type eth netdev eth1 flavour pcipf controller 1 pfnum 0 external true splittable false
function:
hw_addr a0:88:c2:45:17:7c state inactive opstate detached roce enable max_io_eqs 120
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260203102402.1712218-1-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As CAN skbs don't use IP checksums the skb->csum_start variable was used to
store the can-gw CAN frame time-to-live counter together with
skb->ip_summed set to CHECKSUM_UNNECESSARY.
Remove the 'hack' using the skb->csum_start variable and move the content
to can_skb_ext::can_gw_hops of the CAN skb extensions.
The module parameter 'max_hops' has been reduced to a single byte to fit
can_skb_ext::can_gw_hops as the maximum value to be stored is 6.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-6-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch removes struct can_skb_priv which was stored at skb->head and
the can_skb_reserve() helper which was used to shift skb->head.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-5-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The can_skb_priv::frame_len variable is used to cache a previous
calculated CAN frame length to be passed to BQL queueing disciplines.
Move the can_skb_priv::frame_len content to can_skb_ext::can_framelen.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-4-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When routing CAN frames over different CAN interfaces the interface index
skb->iif is overwritten with every single hop. To prevent sending a CAN
frame back to its originating (first) incoming CAN interface another
ifindex variable is needed, which was stored in can_skb_priv::ifindex.
Move the can_skb_priv::ifindex content to can_skb_ext::can_iif.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-3-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
To remove the private CAN bus skb headroom infrastructure 8 bytes need to
be stored in the skb. The skb extensions are a common pattern and an easy
and efficient way to hold private data travelling along with the skb. We
only need the skb_ext_add() and skb_ext_find() functions to allocate and
access CAN specific content as the skb helpers to copy/clone/free skbs
automatically take care of skb extensions and their final removal.
This patch introduces the complete CAN skb extensions infrastructure:
- add struct can_skb_ext in new file include/net/can.h
- add include/net/can.h in MAINTAINERS
- add SKB_EXT_CAN to skbuff.c and skbuff.h
- select SKB_EXTENSIONS in Kconfig when CONFIG_CAN is enabled
- check for existing CAN skb extensions in can_rcv() in af_can.c
- add CAN skb extensions allocation at every skb_alloc() location
- duplicate the skb extensions if cloning outgoing skbs (framelen/gw_hops)
- introduce can_skb_ext_add() and can_skb_ext_find() helpers
The patch also corrects an indention issue in the original code from 2018:
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602010426.PnGrYAk3-lkp@intel.com/
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-2-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The can_skb_priv::skbcnt variable is used to identify CAN skbs in the RX
path analogue to the skb->hash.
As the skb hash is not filled in CAN skbs move the private skbcnt value to
skb->hash and set skb->sw_hash accordingly. The skb->hash is a value used
for RPS to identify skbs. Use it as intended.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-1-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
PPP channels using chan->direct_xmit prepend the PPP header to a skb and
call dev_queue_xmit() directly. In this mode the skb does not need to be
linear, but the PPP netdevice currently does not advertise
scatter-gather features, causing unnecessary linearization and
preventing GSO.
Enable NETIF_F_SG and NETIF_F_FRAGLIST on PPP devices. In case a linear
buffer is required (PPP compression, multilink, and channels without
direct_xmit), call skb_linearize() explicitly.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://patch.msgid.link/20260129012902.941-1-dqfext@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
