summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-11-25macvlan: enforce a consistent minimal mtuEric Dumazet
commit b64085b00044bdf3cd1c9825e9ef5b2e0feae91a upstream. macvlan should enforce a minimal mtu of 68, even at link creation. This patch avoids the current behavior (which could lead to crashes in ipv6 stack if the link is brought up) $ ip link add macvlan1 link eno1 mtu 8 type macvlan # This should fail ! $ ip link sh dev macvlan1 5: macvlan1@eno1: <BROADCAST,MULTICAST> mtu 8 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 02:47:6c:24:74:82 brd ff:ff:ff:ff:ff:ff $ ip link set macvlan1 mtu 67 Error: mtu less than device minimum. $ ip link set macvlan1 mtu 68 $ ip link set macvlan1 mtu 8 Error: mtu less than device minimum. Fixes: 91572088e3fd ("net: use core MTU range checking in core net infra") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25serial: 8250: Flush DMA Rx on RLSIIlpo Järvinen
commit 1980860e0c8299316cddaf0992dd9e1258ec9d88 upstream. Returning true from handle_rx_dma() without flushing DMA first creates a data ordering hazard. If DMA Rx has handled any character at the point when RLSI occurs, the non-DMA path handles any pending characters jumping them ahead of those characters that are pending under DMA. Fixes: 75df022b5f89 ("serial: 8250_dma: Fix RX handling") Cc: <stable@vger.kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221108121952.5497-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25misc/vmw_vmci: fix an infoleak in vmci_host_do_receive_datagram()Alexander Potapenko
commit e5b0d06d9b10f5f43101bd6598b076c347f9295f upstream. `struct vmci_event_qp` allocated by qp_notify_peer() contains padding, which may carry uninitialized data to the userspace, as observed by KMSAN: BUG: KMSAN: kernel-infoleak in instrument_copy_to_user ./include/linux/instrumented.h:121 instrument_copy_to_user ./include/linux/instrumented.h:121 _copy_to_user+0x5f/0xb0 lib/usercopy.c:33 copy_to_user ./include/linux/uaccess.h:169 vmci_host_do_receive_datagram drivers/misc/vmw_vmci/vmci_host.c:431 vmci_host_unlocked_ioctl+0x33d/0x43d0 drivers/misc/vmw_vmci/vmci_host.c:925 vfs_ioctl fs/ioctl.c:51 ... Uninit was stored to memory at: kmemdup+0x74/0xb0 mm/util.c:131 dg_dispatch_as_host drivers/misc/vmw_vmci/vmci_datagram.c:271 vmci_datagram_dispatch+0x4f8/0xfc0 drivers/misc/vmw_vmci/vmci_datagram.c:339 qp_notify_peer+0x19a/0x290 drivers/misc/vmw_vmci/vmci_queue_pair.c:1479 qp_broker_attach drivers/misc/vmw_vmci/vmci_queue_pair.c:1662 qp_broker_alloc+0x2977/0x2f30 drivers/misc/vmw_vmci/vmci_queue_pair.c:1750 vmci_qp_broker_alloc+0x96/0xd0 drivers/misc/vmw_vmci/vmci_queue_pair.c:1940 vmci_host_do_alloc_queuepair drivers/misc/vmw_vmci/vmci_host.c:488 vmci_host_unlocked_ioctl+0x24fd/0x43d0 drivers/misc/vmw_vmci/vmci_host.c:927 ... Local variable ev created at: qp_notify_peer+0x54/0x290 drivers/misc/vmw_vmci/vmci_queue_pair.c:1456 qp_broker_attach drivers/misc/vmw_vmci/vmci_queue_pair.c:1662 qp_broker_alloc+0x2977/0x2f30 drivers/misc/vmw_vmci/vmci_queue_pair.c:1750 Bytes 28-31 of 48 are uninitialized Memory access of size 48 starts at ffff888035155e00 Data copied to user address 0000000020000100 Use memset() to prevent the infoleaks. Also speculatively fix qp_notify_peer_local(), which may suffer from the same problem. Reported-by: syzbot+39be4da489ed2493ba25@syzkaller.appspotmail.com Cc: stable <stable@kernel.org> Fixes: 06164d2b72aa ("VMCI: queue pairs implementation.") Signed-off-by: Alexander Potapenko <glider@google.com> Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Link: https://lore.kernel.org/r/20221104175849.2782567-1-glider@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25mmc: sdhci-pci: Fix possible memory leak caused by missing pci_dev_put()Xiongfeng Wang
commit 222cfa0118aa68687ace74aab8fdf77ce8fbd7e6 upstream. pci_get_device() will increase the reference count for the returned pci_dev. We need to use pci_dev_put() to decrease the reference count before amd_probe() returns. There is no problem for the 'smbus_dev == NULL' branch because pci_dev_put() can also handle the NULL input parameter case. Fixes: 659c9bc114a8 ("mmc: sdhci-pci: Build o2micro support in the same module") Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221114083100.149200-1-wangxiongfeng2@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25mmc: core: properly select voltage range without power cycleYann Gautier
commit 39a72dbfe188291b156dd6523511e3d5761ce775 upstream. In mmc_select_voltage(), if there is no full power cycle, the voltage range selected at the end of the function will be on a single range (e.g. 3.3V/3.4V). To keep a range around the selected voltage (3.2V/3.4V), the mask shift should be reduced by 1. This issue was triggered by using a specific SD-card (Verbatim Premium 16GB UHS-1) on an STM32MP157C-DK2 board. This board cannot do UHS modes and there is no power cycle. And the card was failing to switch to high-speed mode. When adding the range 3.2V/3.3V for this card with the proposed shift change, the card can switch to high-speed mode. Fixes: ce69d37b7d8f ("mmc: core: Prevent violation of specs while initializing cards") Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221028073740.7259-1-yann.gautier@foss.st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25serial: 8250_lpss: Configure DMA also w/o DMA filterIlpo Järvinen
commit 1bfcbe5805d0cfc83c3544dcd01e0a282c1f6790 upstream. If the platform doesn't use DMA device filter (as is the case with Elkhart Lake), whole lpss8250_dma_setup() setup is skipped. This results in skipping also *_maxburst setup which is undesirable. Refactor lpss8250_dma_setup() to configure DMA even if filter is not setup. Cc: stable <stable@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221108121952.5497-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25serial: 8250: Fall back to non-DMA Rx if IIR_RDI occursIlpo Järvinen
commit a931237cbea256aff13bb403da13a97b2d1605d9 upstream. DW UART sometimes triggers IIR_RDI during DMA Rx when IIR_RX_TIMEOUT should have been triggered instead. Since IIR_RDI has higher priority than IIR_RX_TIMEOUT, this causes the Rx to hang into interrupt loop. The problem seems to occur at least with some combinations of small-sized transfers (I've reproduced the problem on Elkhart Lake PSE UARTs). If there's already an on-going Rx DMA and IIR_RDI triggers, fall graciously back to non-DMA Rx. That is, behave as if IIR_RX_TIMEOUT had occurred. 8250_omap already considers IIR_RDI similar to this change so its nothing unheard of. Fixes: 75df022b5f89 ("serial: 8250_dma: Fix RX handling") Cc: <stable@vger.kernel.org> Co-developed-by: Srikanth Thokala <srikanth.thokala@intel.com> Signed-off-by: Srikanth Thokala <srikanth.thokala@intel.com> Co-developed-by: Aman Kumar <aman.kumar@intel.com> Signed-off-by: Aman Kumar <aman.kumar@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221108121952.5497-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25dm ioctl: fix misbehavior if list_versions races with module loadingMikulas Patocka
commit 4fe1ec995483737f3d2a14c3fe1d8fe634972979 upstream. __list_versions will first estimate the required space using the "dm_target_iterate(list_version_get_needed, &needed)" call and then will fill the space using the "dm_target_iterate(list_version_get_info, &iter_info)" call. Each of these calls locks the targets using the "down_read(&_lock)" and "up_read(&_lock)" calls, however between the first and second "dm_target_iterate" there is no lock held and the target modules can be loaded at this point, so the second "dm_target_iterate" call may need more space than what was the first "dm_target_iterate" returned. The code tries to handle this overflow (see the beginning of list_version_get_info), however this handling is incorrect. The code sets "param->data_size = param->data_start + needed" and "iter_info.end = (char *)vers+len" - "needed" is the size returned by the first dm_target_iterate call; "len" is the size of the buffer allocated by userspace. "len" may be greater than "needed"; in this case, the code will write up to "len" bytes into the buffer, however param->data_size is set to "needed", so it may write data past the param->data_size value. The ioctl interface copies only up to param->data_size into userspace, thus part of the result will be truncated. Fix this bug by setting "iter_info.end = (char *)vers + needed;" - this guarantees that the second "dm_target_iterate" call will write only up to the "needed" buffer and it will exit with "DM_BUFFER_FULL_FLAG" if it overflows the "needed" space - in this case, userspace will allocate a larger buffer and retry. Note that there is also a bug in list_version_get_needed - we need to add "strlen(tt->name) + 1" to the needed size, not "strlen(tt->name)". Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25iio: pressure: ms5611: changed hardcoded SPI speed to value limitedMitja Spes
commit 741cec30cc52058d1c10d415f3b98319887e4f73 upstream. Don't hardcode the ms5611 SPI speed, limit it instead. Signed-off-by: Mitja Spes <mitja@lxnav.com> Fixes: c0644160a8b5 ("iio: pressure: add support for MS5611 pressure and temperature sensor") Link: https://lore.kernel.org/r/20221021135827.1444793-3-mitja@lxnav.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25iio: trigger: sysfs: fix possible memory leak in iio_sysfs_trig_init()Yang Yingliang
commit efa17e90e1711bdb084e3954fa44afb6647331c0 upstream. dev_set_name() allocates memory for name, it need be freed when device_add() fails, call put_device() to give up the reference that hold in device_initialize(), so that it can be freed in kobject_cleanup() when the refcount hit to 0. Fault injection test can trigger this: unreferenced object 0xffff8e8340a7b4c0 (size 32): comm "modprobe", pid 243, jiffies 4294678145 (age 48.845s) hex dump (first 32 bytes): 69 69 6f 5f 73 79 73 66 73 5f 74 72 69 67 67 65 iio_sysfs_trigge 72 00 a7 40 83 8e ff ff 00 86 13 c4 f6 ee ff ff r..@............ backtrace: [<0000000074999de8>] __kmem_cache_alloc_node+0x1e9/0x360 [<00000000497fd30b>] __kmalloc_node_track_caller+0x44/0x1a0 [<000000003636c520>] kstrdup+0x2d/0x60 [<0000000032f84da2>] kobject_set_name_vargs+0x1e/0x90 [<0000000092efe493>] dev_set_name+0x4e/0x70 Fixes: 1f785681a870 ("staging:iio:trigger sysfs userspace trigger rework.") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20221022074212.1386424-1-yangyingliang@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25iio: adc: at91_adc: fix possible memory leak in at91_adc_allocate_trigger()Yang Yingliang
commit 65f20301607d07ee279b0804d11a05a62a6c1a1c upstream. If iio_trigger_register() returns error, it should call iio_trigger_free() to give up the reference that hold in iio_trigger_alloc(), so that it can call iio_trig_release() to free memory when the refcount hit to 0. Fixes: 0e589d5fb317 ("ARM: AT91: IIO: Add AT91 ADC driver.") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221024084511.815096-1-yangyingliang@huawei.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25usb: chipidea: fix deadlock in ci_otg_del_timerDuoming Zhou
commit 7a58b8d6021426b796eebfae80983374d9a80a75 upstream. There is a deadlock in ci_otg_del_timer(), the process is shown below: (thread 1) | (thread 2) ci_otg_del_timer() | ci_otg_hrtimer_func() ... | spin_lock_irqsave() //(1) | ... ... | hrtimer_cancel() | spin_lock_irqsave() //(2) (block forever) We hold ci->lock in position (1) and use hrtimer_cancel() to wait ci_otg_hrtimer_func() to stop, but ci_otg_hrtimer_func() also need ci->lock in position (2). As a result, the hrtimer_cancel() in ci_otg_del_timer() will be blocked forever. This patch extracts hrtimer_cancel() from the protection of spin_lock_irqsave() in order that the ci_otg_hrtimer_func() could obtain the ci->lock. What`s more, there will be no race happen. Because the "next_timer" is always under the protection of spin_lock_irqsave() and we only check whether "next_timer" equals to NUM_OTG_FSM_TIMERS in the following code. Fixes: 3a316ec4c91c ("usb: chipidea: use hrtimer for otg fsm timers") Cc: stable <stable@kernel.org> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220918033312.94348-1-duoming@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25usb: add NO_LPM quirk for Realforce 87U KeyboardNicolas Dumazet
commit 181135bb20dcb184edd89817831b888eb8132741 upstream. Before adding this quirk, this (mechanical keyboard) device would not be recognized, logging: new full-speed USB device number 56 using xhci_hcd unable to read config index 0 descriptor/start: -32 chopping to 0 config(s) It would take dozens of plugging/unpuggling cycles for the keyboard to be recognized. Keyboard seems to simply work after applying this quirk. This issue had been reported by users in two places already ([1], [2]) but nobody tried upstreaming a patch yet. After testing I believe their suggested fix (DELAY_INIT + NO_LPM + DEVICE_QUALIFIER) was probably a little overkill. I assume this particular combination was tested because it had been previously suggested in [3], but only NO_LPM seems sufficient for this device. [1]: https://qiita.com/float168/items/fed43d540c8e2201b543 [2]: https://blog.kostic.dev/posts/making-the-realforce-87ub-work-with-usb30-on-Ubuntu/ [3]: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678477 Cc: stable@vger.kernel.org Signed-off-by: Nicolas Dumazet <ndumazet@google.com> Link: https://lore.kernel.org/r/20221109122946.706036-1-ndumazet@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25USB: serial: option: add Fibocom FM160 0x0111 compositionReinhard Speyerer
commit 148f4b32b4504d8a32cf82049b7b9499a4b299ab upstream. Add support for the following Fibocom FM160 composition: 0x0111: MBIM + MODEM + DIAG + AT T: Bus=01 Lev=02 Prnt=125 Port=01 Cnt=02 Dev#= 93 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0111 Rev= 5.04 S: Manufacturer=Fibocom S: Product=Fibocom FM160 Modem_SN:12345678 S: SerialNumber=12345678 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25USB: serial: option: add u-blox LARA-L6 modemDavide Tronchin
commit c1547f12df8b8e9ca2686accee43213ecd117efe upstream. Add LARA-L6 PIDs for three different USB compositions. LARA-L6 module can be configured (by AT interface) in three different USB modes: * Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial interfaces * RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial interfaces and 1 RmNet virtual network interface * CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial interface and 1 CDC-ECM virtual network interface In default mode LARA-L6 exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parser/alternative functions In RmNet mode LARA-L6 exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parset/alternative functions If 4: RMNET interface In CDC-ECM mode LARA-L6 exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parset/alternative functions If 4: CDC-ECM interface Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> [ johan: drop PID defines in favour of comments ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25USB: serial: option: add u-blox LARA-R6 00B modemDavide Tronchin
commit d9e37a5c4d80ea25a7171ab8557a449115554e76 upstream. The official LARA-R6 (00B) modem uses 0x908b PID. LARA-R6 00B does not implement a QMI interface on port 4, the reservation (RSVD(4)) has been added to meet other companies that implement QMI on that interface. LARA-R6 00B USB composition exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parser/alternative functions Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25USB: serial: option: remove old LARA-R6 PIDDavide Tronchin
commit 2ec106b96afc19698ff934323b633c0729d4c7f8 upstream. Remove the UBLOX_PRODUCT_R6XX 0x90fa association since LARA-R6 00B final product uses a new USB composition with different PID. 0x90fa PID used only by LARA-R6 internal prototypes. Move 0x90fa PID directly in the option_ids array since used by other Qualcomm based modem vendors as pointed out in: https://lore.kernel.org/all/6572c4e6-d8bc-b8d3-4396-d879e4e76338@gmail.com Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25USB: serial: option: add Sierra Wireless EM9191Benoît Monin
commit df3414b0a245f43476061fddd78cee7d6cff797f upstream. Add support for the AT and diag ports, similar to other qualcomm SDX55 modems. In QDL mode, the modem uses a different device ID and support is provided by qcserial in commit 11c52d250b34 ("USB: serial: qcserial: add EM9191 QDL support"). T: Bus=08 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=1199 ProdID=90d3 Rev=00.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=Sierra Wireless EM9191 S: SerialNumber=xxxxxxxxxxxxxxxx C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) Signed-off-by: Benoît Monin <benoit.monin@gmx.fr> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25drbd: use after free in drbd_create_device()Dan Carpenter
[ Upstream commit a7a1598189228b5007369a9622ccdf587be0730f ] The drbd_destroy_connection() frees the "connection" so use the _safe() iterator to prevent a use after free. Fixes: b6f85ef9538b ("drbd: Iterate over all connections") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/Y3Jd5iZRbNQ9w6gm@kili Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25xen/pcpu: fix possible memory leak in register_pcpu()Yang Yingliang
[ Upstream commit da36a2a76b01b210ffaa55cdc2c99bc8783697c5 ] In device_add(), dev_set_name() is called to allocate name, if it returns error, the name need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup(). Fixes: f65c9bb3fb72 ("xen/pcpu: Xen physical cpus online/offline sys interface") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20221110152441.401630-1-yangyingliang@huawei.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25mISDN: fix misuse of put_device() in mISDN_register_device()Wang ShaoBo
[ Upstream commit 2d25107e111a85c56f601a5470f1780ec054e6ac ] We should not release reference by put_device() before calling device_initialize(). Fixes: e7d1d4d9ac0d ("mISDN: fix possible memory leak in mISDN_register_device()") Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25mISDN: fix possible memory leak in mISDN_dsp_element_register()Yang Yingliang
[ Upstream commit 98a2ac1ca8fd6eca6867726fe238d06e75eb1acd ] Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array"), the name of device is allocated dynamically, use put_device() to give up the reference, so that the name can be freed in kobject_cleanup() when the refcount is 0. The 'entry' is going to be freed in mISDN_dsp_dev_release(), so the kfree() is removed. list_del() is called in mISDN_dsp_dev_release(), so it need be initialized. Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221109132832.3270119-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25net: bgmac: Drop free_netdev() from bgmac_enet_remove()Wei Yongjun
[ Upstream commit 6f928ab8ee9bfbcb0e631c47ea8a16c3d5116ff1 ] netdev is allocated in bgmac_alloc() with devm_alloc_etherdev() and will be auto released in ->remove and ->probe failure path. Using free_netdev() in bgmac_enet_remove() leads to double free. Fixes: 34a5102c3235 ("net: bgmac: allocate struct bgmac just once & don't copy it") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20221109150136.2991171-1-weiyongjun@huaweicloud.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_mapZeng Heng
[ Upstream commit 91d5c5060ee24fe8da88cd585bb43b843d2f0dce ] Here is the BUG report by KASAN about null pointer dereference: BUG: KASAN: null-ptr-deref in strcmp+0x2e/0x50 Read of size 1 at addr 0000000000000000 by task python3/2640 Call Trace: strcmp __of_find_property of_find_property pinctrl_dt_to_map kasprintf() would return NULL pointer when kmalloc() fail to allocate. So directly return ENOMEM, if kasprintf() return NULL pointer. Fixes: 57291ce295c0 ("pinctrl: core device tree mapping table parsing support") Signed-off-by: Zeng Heng <zengheng4@huawei.com> Link: https://lore.kernel.org/r/20221110082056.2014898-1-zengheng4@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25parport_pc: Avoid FIFO port location truncationMaciej W. Rozycki
[ Upstream commit ab126f51c93a15093df604f661c9480854c005a3 ] Match the data type of a temporary holding a reference to the FIFO port with the type of the original reference coming from `struct parport', avoiding data truncation with LP64 ports such as SPARC64 that refer to PCI port I/O locations via their corresponding MMIO addresses and will therefore have non-zero bits in the high 32-bit part of the reference. And in any case it is cleaner to have the data types matching here. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/linux-pci/20220419033752.GA1101844@bhelgaas/ Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209231912550.29493@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25tty: n_gsm: fix sleep-in-atomic-context bug in gsm_control_sendDuoming Zhou
[ Upstream commit 7b7dfe4833c70a11cdfa51b38705103bd31eddaa ] The function gsm_dlci_t1() is a timer handler that runs in an atomic context, but it calls "kzalloc(..., GFP_KERNEL)" that may sleep. As a result, the sleep-in-atomic-context bug will happen. The process is shown below: gsm_dlci_t1() gsm_dlci_open() gsm_modem_update() gsm_modem_upd_via_msc() gsm_control_send() kzalloc(sizeof(.., GFP_KERNEL) //may sleep This patch changes the gfp_t parameter of kzalloc() from GFP_KERNEL to GFP_ATOMIC in order to mitigate the bug. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20221002040709.27849-1-duoming@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25serial: 8250: omap: Flush PM QOS work on removeTony Lindgren
[ Upstream commit d0b68629bd2fb61e0171a62f2e8da3db322f5cf6 ] Rebinding 8250_omap in a loop will at some point produce a warning for kernel/power/qos.c:296 cpu_latency_qos_update_request() with error "cpu_latency_qos_update_request called for unknown object". Let's flush the possibly pending PM QOS work scheduled from omap8250_runtime_suspend() before we disable runtime PM. Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver") Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20221028110044.54719-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25serial: 8250_omap: remove wait loop from Errata i202 workaroundMatthias Schiffer
[ Upstream commit e828e56684d61b17317e0cfdef83791fa61cb76b ] We were occasionally seeing the "Errata i202: timedout" on an AM335x board when repeatedly opening and closing a UART connected to an active sender. As new input may arrive at any time, it is possible to miss the "RX FIFO empty" condition, forcing the loop to wait until it times out. Nothing in the i202 Advisory states that such a wait is even necessary; other FIFO clear functions like serial8250_clear_fifos() do not wait either. For this reason, it seems safe to remove the wait, fixing the mentioned issue. Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver") Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20221013112339.2540767-1-matthias.schiffer@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25drm/imx: imx-tve: Fix return type of imx_tve_connector_mode_validNathan Huckleberry
[ Upstream commit fc007fb815ab5395c3962c09b79a1630b0fbed9c ] The mode_valid field in drm_connector_helper_funcs is expected to be of type: enum drm_mode_status (* mode_valid) (struct drm_connector *connector, struct drm_display_mode *mode); The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of imx_tve_connector_mode_valid should be changed from int to enum drm_mode_status. Reported-by: Dan Carpenter <error27@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Cc: llvm@lists.linux.dev Signed-off-by: Nathan Huckleberry <nhuck@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220913205544.155106-1-nhuck@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25dmaengine: at_hdmac: Check return code of dma_async_device_registerTudor Ambarus
commit c47e6403fa099f200868d6b106701cb42d181d2b upstream. dma_async_device_register() can fail, check the return code and display an error. Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-16-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25dmaengine: at_hdmac: Fix impossible conditionTudor Ambarus
commit 28cbe5a0a46a6637adbda52337d7b2777fc04027 upstream. The iterator can not be greater than ATC_MAX_DSCR_TRIALS, as the for loop will stop when i == ATC_MAX_DSCR_TRIALS. While here, use the common "i" name for the iterator. Fixes: 93dce3a6434f ("dmaengine: at_hdmac: fix residue computation") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-15-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25dmaengine: at_hdmac: Don't allow CPU to reorder channel enableTudor Ambarus
commit 580ee84405c27d6ed419abe4d2b3de1968abdafd upstream. at_hdmac uses __raw_writel for register writes. In the absence of a barrier, the CPU may reorder the register operations. Introduce a write memory barrier so that the CPU does not reorder the channel enable, thus the start of the transfer, without making sure that all the pre-required register fields are already written. Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller") Reported-by: Peter Rosin <peda@axentia.se> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/ Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-14-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25dmaengine: at_hdmac: Fix completion of unissued descriptor in case of errorsTudor Ambarus
commit ef2cb4f0ce479f77607b04c4b0414bf32f863ee8 upstream. In case the controller detected an error, the code took the chance to move all the queued (submitted) descriptors to the active (issued) list. This was wrong as if there were any descriptors in the submitted list they were moved to the issued list without actually issuing them to the controller, thus a completion could be raised without even fireing the descriptor. Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller") Reported-by: Peter Rosin <peda@axentia.se> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/ Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-13-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25dmaengine: at_hdmac: Don't start transactions at tx_submit levelTudor Ambarus
commit 7176a6a8982d311e50a7c1168868d26e65bbba19 upstream. tx_submit is supposed to push the current transaction descriptor to a pending queue, waiting for issue_pending() to be called. issue_pending() must start the transfer, not tx_submit(), thus remove atc_dostart() from atc_tx_submit(). Clients of at_xdmac that assume that tx_submit() starts the transfer must be updated and call dma_async_issue_pending() if they miss to call it. The vdbg print was moved to after the lock is released. It is desirable to do the prints without the lock held if possible, and because the if statement disappears there's no reason why to do the print while holding the lock. Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller") Reported-by: Peter Rosin <peda@axentia.se> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/ Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-3-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25dmaengine: at_hdmac: Fix at_lli struct definitionTudor Ambarus
commit f1171bbdd2ba2a50ee64bb198a78c268a5baf5f1 upstream. Those hardware registers are all of 32 bits, while dma_addr_t ca be of type u64 or u32 depending on CONFIG_ARCH_DMA_ADDR_T_64BIT. Force u32 to comply with what the hardware expects. Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-2-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25platform/x86: hp_wmi: Fix rfkill causing soft blocked wifiJorge Lopez
commit 1598bfa8e1faa932de42e1ee7628a1c4c4263f0a upstream. After upgrading BIOS to U82 01.02.01 Rev.A, the console is flooded strange char "^@" which printed out every second and makes login nearly impossible. Also the below messages were shown both in console and journal/dmesg every second: usb 1-3: Device not responding to setup address. usb 1-3: device not accepting address 4, error -71 usb 1-3: device descriptor read/all, error -71 usb usb1-port3: unable to enumerate USB device Wifi is soft blocked by checking rfkill. When unblocked manually, after few seconds it would be soft blocked again. So I was suspecting something triggered rfkill to soft block wifi. At the end it was fixed by removing hp_wmi module. The root cause is the way hp-wmi driver handles command 1B on post-2009 BIOS. In pre-2009 BIOS, command 1Bh return 0x4 to indicate that BIOS no longer controls the power for the wireless devices. Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216468 Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20221028155527.7724-1-jorge.lopez2@hp.com Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25drm/i915/dmabuf: fix sg_table handling in map_dma_bufMatthew Auld
commit f90daa975911961b65070ec72bd7dd8d448f9ef7 upstream. We need to iterate over the original entries here for the sg_table, pulling out the struct page for each one, to be remapped. However currently this incorrectly iterates over the final dma mapped entries, which is likely just one gigantic sg entry if the iommu is enabled, leading to us only mapping the first struct page (and any physically contiguous pages following it), even if there is potentially lots more data to follow. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7306 Fixes: 1286ff739773 ("i915: add dmabuf/prime buffer sharing support.") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Michael J. Ruhl <michael.j.ruhl@intel.com> Cc: <stable@vger.kernel.org> # v3.5+ Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221028155029.494736-1-matthew.auld@intel.com (cherry picked from commit 28d52f99bbca7227008cf580c9194c9b3516968e) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25net: macvlan: fix memory leaks of macvlan_common_newlinkChuang Wang
[ Upstream commit 23569b5652ee8e8e55a12f7835f59af6f3cefc30 ] kmemleak reports memory leaks in macvlan_common_newlink, as follows: ip link add link eth0 name .. type macvlan mode source macaddr add <MAC-ADDR> kmemleak reports: unreferenced object 0xffff8880109bb140 (size 64): comm "ip", pid 284, jiffies 4294986150 (age 430.108s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 b8 aa 5a 12 80 88 ff ff ..........Z..... 80 1b fa 0d 80 88 ff ff 1e ff ac af c7 c1 6b 6b ..............kk backtrace: [<ffffffff813e06a7>] kmem_cache_alloc_trace+0x1c7/0x300 [<ffffffff81b66025>] macvlan_hash_add_source+0x45/0xc0 [<ffffffff81b66a67>] macvlan_changelink_sources+0xd7/0x170 [<ffffffff81b6775c>] macvlan_common_newlink+0x38c/0x5a0 [<ffffffff81b6797e>] macvlan_newlink+0xe/0x20 [<ffffffff81d97f8f>] __rtnl_newlink+0x7af/0xa50 [<ffffffff81d98278>] rtnl_newlink+0x48/0x70 ... In the scenario where the macvlan mode is configured as 'source', macvlan_changelink_sources() will be execured to reconfigure list of remote source mac addresses, at the same time, if register_netdevice() return an error, the resource generated by macvlan_changelink_sources() is not cleaned up. Using this patch, in the case of an error, it will execute macvlan_flush_sources() to ensure that the resource is cleaned up. Fixes: aa5fd0fb7748 ("driver: macvlan: Destroy new macvlan port if macvlan_common_newlink failed.") Signed-off-by: Chuang Wang <nashuiliang@gmail.com> Link: https://lore.kernel.org/r/20221109090735.690500-1-nashuiliang@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25net: mv643xx_eth: disable napi when init rxq or txq failed in mv643xx_eth_open()Zhengchao Shao
[ Upstream commit f111606b63ff2282428ffbac0447c871eb957b6c ] When failed to init rxq or txq in mv643xx_eth_open() for opening device, napi isn't disabled. When open mv643xx_eth device next time, it will trigger a BUG_ON() in napi_enable(). Compile tested only. Fixes: 2257e05c1705 ("mv643xx_eth: get rid of receive-side locking") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221109025432.80900-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25ethernet: s2io: disable napi when start nic failed in s2io_card_up()Zhengchao Shao
[ Upstream commit 0348c1ab980c1d43fb37b758d4b760990c066cb5 ] When failed to start nic or add interrupt service routine in s2io_card_up() for opening device, napi isn't disabled. When open s2io device next time, it will trigger a BUG_ON()in napi_enable(). Compile tested only. Fixes: 5f490c968056 ("S2io: Fixed synchronization between scheduling of napi with card reset and close") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221109023741.131552-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25net: cxgb3_main: disable napi when bind qsets failed in cxgb_up()Zhengchao Shao
[ Upstream commit d75aed1428da787cbe42bc073d76f1354f364d92 ] When failed to bind qsets in cxgb_up() for opening device, napi isn't disabled. When open cxgb3 device next time, it will trigger a BUG_ON() in napi_enable(). Compile tested only. Fixes: 48c4b6dbb7e2 ("cxgb3 - fix port up/down error path") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221109021451.121490-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25drivers: net: xgene: disable napi when register irq failed in xgene_enet_open()Zhengchao Shao
[ Upstream commit ce9e57feeed81d17d5e80ed86f516ff0d39c3867 ] When failed to register irq in xgene_enet_open() for opening device, napi isn't disabled. When open xgene device next time, it will reports a invalid opcode issue. Fix it. Only be compiled, not be tested. Fixes: aeb20b6b3f4e ("drivers: net: xgene: fix: ifconfig up/down crash") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221107043032.357673-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25dmaengine: mv_xor_v2: Fix a resource leak in mv_xor_v2_remove()Christophe JAILLET
[ Upstream commit 081195d17a0c4c636da2b869bd5809d42e8cbb13 ] A clk_prepare_enable() call in the probe is not balanced by a corresponding clk_disable_unprepare() in the remove function. Add the missing call. Fixes: 3cd2c313f1d6 ("dmaengine: mv_xor_v2: Fix clock resource by adding a register clock") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/e9e3837a680c9bd2438e4db2b83270c6c052d005.1666640987.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25drm/vc4: Fix missing platform_unregister_drivers() call in vc4_drm_register()Yuan Can
[ Upstream commit cf53db768a8790fdaae2fa3a81322b080285f7e5 ] A problem about modprobe vc4 failed is triggered with the following log given: [ 420.327987] Error: Driver 'vc4_hvs' is already registered, aborting... [ 420.333904] failed to register platform driver vc4_hvs_driver [vc4]: -16 modprobe: ERROR: could not insert 'vc4': Device or resource busy The reason is that vc4_drm_register() returns platform_driver_register() directly without checking its return value, if platform_driver_register() fails, it returns without unregistering all the vc4 drivers, resulting the vc4 can never be installed later. A simple call graph is shown as below: vc4_drm_register() platform_register_drivers() # all vc4 drivers are registered platform_driver_register() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without unregister drivers Fixing this problem by checking the return value of platform_driver_register() and do platform_unregister_drivers() if error happened. Fixes: c8b75bca92cb ("drm/vc4: Add KMS support for Raspberry Pi.") Signed-off-by: Yuan Can <yuancan@huawei.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221103014705.109322-1-yuancan@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25hamradio: fix issue of dev reference count leakage in bpq_device_event()Zhengchao Shao
[ Upstream commit 85cbaf032d3cd9f595152625eda5d4ecb1d6d78d ] When following tests are performed, it will cause dev reference counting leakage. a)ip link add bond2 type bond mode balance-rr b)ip link set bond2 up c)ifenslave -f bond2 rose1 d)ip link del bond2 When new bond device is created, the default type of the bond device is ether. And the bond device is up, bpq_device_event() receives the message and creates a new bpq device. In this case, the reference count value of dev is hold once. But after "ifenslave -f bond2 rose1" command is executed, the type of the bond device is changed to rose. When the bond device is unregistered, bpq_device_event() will not put the dev reference count. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25net: lapbether: fix issue of dev reference count leakage in ↵Zhengchao Shao
lapbeth_device_event() [ Upstream commit 531705a765493655472c993627106e19f7e5a6d2 ] When following tests are performed, it will cause dev reference counting leakage. a)ip link add bond2 type bond mode balance-rr b)ip link set bond2 up c)ifenslave -f bond2 rose1 d)ip link del bond2 When new bond device is created, the default type of the bond device is ether. And the bond device is up, lapbeth_device_event() receives the message and creates a new lapbeth device. In this case, the reference count value of dev is hold once. But after "ifenslave -f bond2 rose1" command is executed, the type of the bond device is changed to rose. When the bond device is unregistered, lapbeth_device_event() will not put the dev reference count. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25net: fman: Unregister ethernet device on removalSean Anderson
[ Upstream commit b7cbc6740bd6ad5d43345a2504f7e4beff0d709f ] When the mac device gets removed, it leaves behind the ethernet device. This will result in a segfault next time the ethernet device accesses mac_dev. Remove the ethernet device when we get removed to prevent this. This is not completely reversible, since some resources aren't cleaned up properly, but that can be addressed later. Fixes: 3933961682a3 ("fsl/fman: Add FMan MAC driver") Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20221103182831.2248833-1-sean.anderson@seco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25bnxt_en: fix potentially incorrect return value for ndo_rx_flow_steerAlex Barba
[ Upstream commit 02597d39145bb0aa81d04bf39b6a913ce9a9d465 ] In the bnxt_en driver ndo_rx_flow_steer returns '0' whenever an entry that we are attempting to steer is already found. This is not the correct behavior. The return code should be the value/index that corresponds to the entry. Returning zero all the time causes the RFS records to be incorrect unless entry '0' is the correct one. As flows migrate to different cores this can create entries that are not correct. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reported-by: Akshay Navgire <anavgire@purestorage.com> Signed-off-by: Alex Barba <alex.barba@broadcom.com> Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25HID: hyperv: fix possible memory leak in mousevsc_probe()Yang Yingliang
[ Upstream commit b5bcb94b0954a026bbd671741fdb00e7141f9c91 ] If hid_add_device() returns error, it should call hid_destroy_device() to free hid_dev which is allocated in hid_allocate_device(). Fixes: 74c4fb058083 ("HID: hv_mouse: Properly add the hid device") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-10wifi: brcmfmac: Fix potential buffer overflow in brcmf_fweh_event_worker()Dokyung Song
commit 6788ba8aed4e28e90f72d68a9d794e34eac17295 upstream. This patch fixes an intra-object buffer overflow in brcmfmac that occurs when the device provides a 'bsscfgidx' equal to or greater than the buffer size. The patch adds a check that leads to a safe failure if that is the case. This fixes CVE-2022-3628. UBSAN: array-index-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c index 52 is out of range for type 'brcmf_if *[16]' CPU: 0 PID: 1898 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: events brcmf_fweh_event_worker Call Trace: dump_stack_lvl+0x57/0x7d ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds+0x69/0x80 ? memcpy+0x39/0x60 brcmf_fweh_event_worker+0xae1/0xc00 ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? process_one_work+0x13e0/0x13e0 kthread+0x379/0x450 ? _raw_spin_unlock_irq+0x24/0x30 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x1f/0x30 ================================================================================ general protection fault, probably for non-canonical address 0xe5601c0020023fff: 0000 [#1] SMP KASAN KASAN: maybe wild-memory-access in range [0x2b0100010011fff8-0x2b0100010011ffff] CPU: 0 PID: 1898 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: events brcmf_fweh_event_worker RIP: 0010:brcmf_fweh_call_event_handler.isra.0+0x42/0x100 Code: 89 f5 53 48 89 fb 48 83 ec 08 e8 79 0b 38 fe 48 85 ed 74 7e e8 6f 0b 38 fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 8b 00 00 00 4c 8b 7d 00 44 89 e0 48 ba 00 00 00 RSP: 0018:ffffc9000259fbd8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: ffff888115d8cd50 RCX: 0000000000000000 RDX: 0560200020023fff RSI: ffffffff8304bc91 RDI: ffff888115d8cd50 RBP: 2b0100010011ffff R08: ffff888112340050 R09: ffffed1023549809 R10: ffff88811aa4c047 R11: ffffed1023549808 R12: 0000000000000045 R13: ffffc9000259fca0 R14: ffff888112340050 R15: ffff888112340000 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000004053ccc0 CR3: 0000000112740000 CR4: 0000000000750ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: brcmf_fweh_event_worker+0x117/0xc00 ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? process_one_work+0x13e0/0x13e0 kthread+0x379/0x450 ? _raw_spin_unlock_irq+0x24/0x30 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x1f/0x30 Modules linked in: 88XXau(O) 88x2bu(O) ---[ end trace 41d302138f3ff55a ]--- RIP: 0010:brcmf_fweh_call_event_handler.isra.0+0x42/0x100 Code: 89 f5 53 48 89 fb 48 83 ec 08 e8 79 0b 38 fe 48 85 ed 74 7e e8 6f 0b 38 fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 8b 00 00 00 4c 8b 7d 00 44 89 e0 48 ba 00 00 00 RSP: 0018:ffffc9000259fbd8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: ffff888115d8cd50 RCX: 0000000000000000 RDX: 0560200020023fff RSI: ffffffff8304bc91 RDI: ffff888115d8cd50 RBP: 2b0100010011ffff R08: ffff888112340050 R09: ffffed1023549809 R10: ffff88811aa4c047 R11: ffffed1023549808 R12: 0000000000000045 R13: ffffc9000259fca0 R14: ffff888112340050 R15: ffff888112340000 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000004053ccc0 CR3: 0000000112740000 CR4: 0000000000750ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr> Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Reviewed-by: Arend van Spriel <aspriel@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Dokyung Song <dokyung.song@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221021061359.GA550858@laguna Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 12:53:37 +0000