summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-10-30usb: gadget: f_ncm: allow using NCM in SuperSpeed Plus gadgets.Lorenzo Colitti
[ Upstream commit 7974ecd7d3c0f42a98566f281e44ea8573a2ad88 ] Currently, enabling f_ncm at SuperSpeed Plus speeds results in an oops in config_ep_by_speed because ncm_set_alt passes in NULL ssp_descriptors. Fix this by re-using the SuperSpeed descriptors. This is safe because usb_assign_descriptors calls usb_copy_descriptors. Tested: enabled f_ncm on a dwc3 gadget and 10Gbps link, ran iperf Reviewed-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30eeprom: at25: set minimum read/write access stride to 1Christian Eggers
commit 284f52ac1c6cfa1b2e5c11b84653dd90e4e91de7 upstream. SPI eeproms are addressed by byte. Signed-off-by: Christian Eggers <ceggers@arri.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200728092959.24600-1-ceggers@arri.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-30USB: cdc-wdm: Make wdm_flush() interruptible and add wdm_fsync().Oliver Neukum
commit 37d2a36394d954413a495da61da1b2a51ecd28ab upstream. syzbot is reporting hung task at wdm_flush() [1], for there is a circular dependency that wdm_flush() from flip_close() for /dev/cdc-wdm0 forever waits for /dev/raw-gadget to be closed while close() for /dev/raw-gadget cannot be called unless close() for /dev/cdc-wdm0 completes. Tetsuo Handa considered that such circular dependency is an usage error [2] which corresponds to an unresponding broken hardware [3]. But Alan Stern responded that we should be prepared for such hardware [4]. Therefore, this patch changes wdm_flush() to use wait_event_interruptible_timeout() which gives up after 30 seconds, for hardware that remains silent must be ignored. The 30 seconds are coming out of thin air. Changing wait_event() to wait_event_interruptible_timeout() makes error reporting from close() syscall less reliable. To compensate it, this patch also implements wdm_fsync() which does not use timeout. Those who want to be very sure that data has gone out to the device are now advised to call fsync(), with a caveat that fsync() can return -EINVAL when running on older kernels which do not implement wdm_fsync(). This patch also fixes three more problems (listed below) found during exhaustive discussion and testing. Since multiple threads can concurrently call wdm_write()/wdm_flush(), we need to use wake_up_all() whenever clearing WDM_IN_USE in order to make sure that all waiters are woken up. Also, error reporting needs to use fetch-and-clear approach in order not to report same error for multiple times. Since wdm_flush() checks WDM_DISCONNECTING, wdm_write() should as well check WDM_DISCONNECTING. In wdm_flush(), since locks are not held, it is not safe to dereference desc->intf after checking that WDM_DISCONNECTING is not set [5]. Thus, remove dev_err() from wdm_flush(). [1] https://syzkaller.appspot.com/bug?id=e7b761593b23eb50855b9ea31e3be5472b711186 [2] https://lkml.kernel.org/r/27b7545e-8f41-10b8-7c02-e35a08eb1611@i-love.sakura.ne.jp [3] https://lkml.kernel.org/r/79ba410f-e0ef-2465-b94f-6b9a4a82adf5@i-love.sakura.ne.jp [4] https://lkml.kernel.org/r/20200530011040.GB12419@rowland.harvard.edu [5] https://lkml.kernel.org/r/c85331fc-874c-6e46-a77f-0ef1dc075308@i-love.sakura.ne.jp Reported-by: syzbot <syzbot+854768b99f19e89d7f81@syzkaller.appspotmail.com> Cc: stable <stable@vger.kernel.org> Co-developed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200928141755.3476-1-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-30usb: cdc-acm: add quirk to blacklist ETAS ES58X devicesVincent Mailhol
commit a4f88430af896bf34ec25a7a5f0e053fb3d928e0 upstream. The ES58X devices has a CDC ACM interface (used for debug purpose). During probing, the device is thus recognized as USB Modem (CDC ACM), preventing the etas-es58x module to load: usbcore: registered new interface driver etas_es58x usb 1-1.1: new full-speed USB device number 14 using xhci_hcd usb 1-1.1: New USB device found, idVendor=108c, idProduct=0159, bcdDevice= 1.00 usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.1: Product: ES581.4 usb 1-1.1: Manufacturer: ETAS GmbH usb 1-1.1: SerialNumber: 2204355 cdc_acm 1-1.1:1.0: No union descriptor, testing for castrated device cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device Thus, these have been added to the ignore list in drivers/usb/class/cdc-acm.c N.B. Future firmware release of the ES58X will remove the CDC-ACM interface. `lsusb -v` of the three devices variant (ES581.4, ES582.1 and ES584.1): Bus 001 Device 011: ID 108c:0159 Robert Bosch GmbH ES581.4 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x108c Robert Bosch GmbH idProduct 0x0159 bcdDevice 1.00 iManufacturer 1 ETAS GmbH iProduct 2 ES581.4 iSerial 3 2204355 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0035 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 5 Bus Powered Configuration bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 0 iInterface 4 ACM Control Interface CDC Header: bcdCDC 1.10 CDC Call Management: bmCapabilities 0x01 call management bDataInterface 0 CDC ACM: bmCapabilities 0x06 sends break line coding and serial state Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 10 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) Bus 001 Device 012: ID 108c:0168 Robert Bosch GmbH ES582 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x108c Robert Bosch GmbH idProduct 0x0168 bcdDevice 1.00 iManufacturer 1 ETAS GmbH iProduct 2 ES582 iSerial 3 0108933 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0043 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 16 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Bus 001 Device 013: ID 108c:0169 Robert Bosch GmbH ES584.1 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x108c Robert Bosch GmbH idProduct 0x0169 bcdDevice 1.00 iManufacturer 1 ETAS GmbH iProduct 2 ES584.1 iSerial 3 0100320 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0043 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 16 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201002154219.4887-8-mailhol.vincent@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-30tty: serial: fsl_lpuart: fix lpuart32_poll_get_charPeng Fan
commit 29788ab1d2bf26c130de8f44f9553ee78a27e8d5 upstream. The watermark is set to 1, so we need to input two chars to trigger RDRF using the original logic. With the new logic, we could always get the char when there is data in FIFO. Suggested-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20200929095509.21680-1-peng.fan@nxp.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-30net: korina: cast KSEG0 address to pointer in kfreeValentin Vidic
[ Upstream commit 3bd57b90554b4bb82dce638e0668ef9dc95d3e96 ] Fixes gcc warning: passing argument 1 of 'kfree' makes pointer from integer without a cast Fixes: 3af5f0f5c74e ("net: korina: fix kfree of rx/tx descriptor array") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr> Link: https://lore.kernel.org/r/20201018184255.28989-1-vvidic@valentin-vidic.from.hr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30ath10k: check idx validity in __ath10k_htt_rx_ring_fill_n()Zekun Shen
[ Upstream commit bad60b8d1a7194df38fd7fe4b22f3f4dcf775099 ] The idx in __ath10k_htt_rx_ring_fill_n function lives in consistent dma region writable by the device. Malfunctional or malicious device could manipulate such idx to have a OOB write. Either by htt->rx_ring.netbufs_ring[idx] = skb; or by ath10k_htt_set_paddrs_ring(htt, paddr, idx); The idx can also be negative as it's signed, giving a large memory space to write to. It's possibly exploitable by corruptting a legit pointer with a skb pointer. And then fill skb with payload as rougue object. Part of the log here. Sometimes it appears as UAF when writing to a freed memory by chance. [ 15.594376] BUG: unable to handle page fault for address: ffff887f5c1804f0 [ 15.595483] #PF: supervisor write access in kernel mode [ 15.596250] #PF: error_code(0x0002) - not-present page [ 15.597013] PGD 0 P4D 0 [ 15.597395] Oops: 0002 [#1] SMP KASAN PTI [ 15.597967] CPU: 0 PID: 82 Comm: kworker/u2:2 Not tainted 5.6.0 #69 [ 15.598843] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 15.600438] Workqueue: ath10k_wq ath10k_core_register_work [ath10k_core] [ 15.601389] RIP: 0010:__ath10k_htt_rx_ring_fill_n (linux/drivers/net/wireless/ath/ath10k/htt_rx.c:173) ath10k_core Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200623221105.3486-1-bruceshenzk@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30scsi: ufs: ufs-qcom: Fix race conditions caused by ufs_qcom_testbus_config()Can Guo
[ Upstream commit 89dd87acd40a44de8ff3358138aedf8f73f4efc6 ] If ufs_qcom_dump_dbg_regs() calls ufs_qcom_testbus_config() from ufshcd_suspend/resume and/or clk gate/ungate context, pm_runtime_get_sync() and ufshcd_hold() will cause a race condition. Fix this by removing the unnecessary calls of pm_runtime_get_sync() and ufshcd_hold(). Link: https://lore.kernel.org/r/1596975355-39813-3-git-send-email-cang@codeaurora.org Reviewed-by: Hongwu Su <hongwus@codeaurora.org> Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30usb: core: Solve race condition in anchor cleanup functionsEli Billauer
[ Upstream commit fbc299437c06648afcc7891e6e2e6638dd48d4df ] usb_kill_anchored_urbs() is commonly used to cancel all URBs on an anchor just before releasing resources which the URBs rely on. By doing so, users of this function rely on that no completer callbacks will take place from any URB on the anchor after it returns. However if this function is called in parallel with __usb_hcd_giveback_urb processing a URB on the anchor, the latter may call the completer callback after usb_kill_anchored_urbs() returns. This can lead to a kernel panic due to use after release of memory in interrupt context. The race condition is that __usb_hcd_giveback_urb() first unanchors the URB and then makes the completer callback. Such URB is hence invisible to usb_kill_anchored_urbs(), allowing it to return before the completer has been called, since the anchor's urb_list is empty. Even worse, if the racing completer callback resubmits the URB, it may remain in the system long after usb_kill_anchored_urbs() returns. Hence list_empty(&anchor->urb_list), which is used in the existing while-loop, doesn't reliably ensure that all URBs of the anchor are gone. A similar problem exists with usb_poison_anchored_urbs() and usb_scuttle_anchored_urbs(). This patch adds an external do-while loop, which ensures that all URBs are indeed handled before these three functions return. This change has no effect at all unless the race condition occurs, in which case the loop will busy-wait until the racing completer callback has finished. This is a rare condition, so the CPU waste of this spinning is negligible. The additional do-while loop relies on usb_anchor_check_wakeup(), which returns true iff the anchor list is empty, and there is no __usb_hcd_giveback_urb() in the system that is in the middle of the unanchor-before-complete phase. The @suspend_wakeups member of struct usb_anchor is used for this purpose, which was introduced to solve another problem which the same race condition causes, in commit 6ec4147e7bdb ("usb-anchor: Delay usb_wait_anchor_empty_timeout wake up till completion is done"). The surely_empty variable is necessary, because usb_anchor_check_wakeup() must be called with the lock held to prevent races. However the spinlock must be released and reacquired if the outer loop spins with an empty URB list while waiting for the unanchor-before-complete passage to finish: The completer callback may very well attempt to take the very same lock. To summarize, using usb_anchor_check_wakeup() means that the patched functions can return only when the anchor's list is empty, and there is no invisible URB being processed. Since the inner while loop finishes on the empty list condition, the new do-while loop will terminate as well, except for when the said race condition occurs. Signed-off-by: Eli Billauer <eli.billauer@gmail.com> Acked-by: Oliver Neukum <oneukum@suse.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200731054650.30644-1-eli.billauer@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30brcm80211: fix possible memleak in brcmf_proto_msgbuf_attachWang Yufen
[ Upstream commit 6c151410d5b57e6bb0d91a735ac511459539a7bf ] When brcmf_proto_msgbuf_attach fail and msgbuf->txflow_wq != NULL, we should destroy the workqueue. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Yufen <wangyufen@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1595237765-66238-1-git-send-email-wangyufen@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30mwifiex: don't call del_timer_sync() on uninitialized timerTetsuo Handa
[ Upstream commit 621a3a8b1c0ecf16e1e5667ea5756a76a082b738 ] syzbot is reporting that del_timer_sync() is called from mwifiex_usb_cleanup_tx_aggr() from mwifiex_unregister_dev() without checking timer_setup() from mwifiex_usb_tx_init() was called [1]. Ganapathi Bhat proposed a possibly cleaner fix, but it seems that that fix was forgotten [2]. "grep -FrB1 'del_timer' drivers/ | grep -FA1 '.function)'" says that currently there are 28 locations which call del_timer[_sync]() only if that timer's function field was initialized (because timer_setup() sets that timer's function field). Therefore, let's use same approach here. [1] https://syzkaller.appspot.com/bug?id=26525f643f454dd7be0078423e3cdb0d57744959 [2] https://lkml.kernel.org/r/CA+ASDXMHt2gq9Hy+iP_BYkWXsSreWdp3_bAfMkNcuqJ3K+-jbQ@mail.gmail.com Reported-by: syzbot <syzbot+dc4127f950da51639216@syzkaller.appspotmail.com> Cc: Ganapathi Bhat <ganapathi.bhat@nxp.com> Cc: Brian Norris <briannorris@chromium.org> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Brian Norris <briannorris@chromium.org> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200821082720.7716-1-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30tty: ipwireless: fix error handlingTong Zhang
[ Upstream commit db332356222d9429731ab9395c89cca403828460 ] ipwireless_send_packet() can only return 0 on success and -ENOMEM on error, the caller should check non zero for error condition Signed-off-by: Tong Zhang <ztong0001@gmail.com> Acked-by: David Sterba <dsterba@suse.com> Link: https://lore.kernel.org/r/20200821161942.36589-1-ztong0001@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30scsi: qedi: Fix list_del corruption while removing active I/ONilesh Javali
[ Upstream commit 28b35d17f9f8573d4646dd8df08917a4076a6b63 ] While aborting the I/O, the firmware cleanup task timed out and driver deleted the I/O from active command list. Some time later the firmware sent the cleanup task response and driver again deleted the I/O from active command list causing firmware to send completion for non-existent I/O and list_del corruption of active command list. Add fix to check if I/O is present before deleting it from the active command list to ensure firmware sends valid I/O completion and protect against list_del corruption. Link: https://lore.kernel.org/r/20200908095657.26821-4-mrangankar@marvell.com Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30scsi: qedi: Protect active command list to avoid list corruptionNilesh Javali
[ Upstream commit c0650e28448d606c84f76c34333dba30f61de993 ] Protect active command list for non-I/O commands like login response, logout response, text response, and recovery cleanup of active list to avoid list corruption. Link: https://lore.kernel.org/r/20200908095657.26821-5-mrangankar@marvell.com Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30Fix use after free in get_capset_info callback.Doug Horn
[ Upstream commit e219688fc5c3d0d9136f8d29d7e0498388f01440 ] If a response to virtio_gpu_cmd_get_capset_info takes longer than five seconds to return, the callback will access freed kernel memory in vg->capsets. Signed-off-by: Doug Horn <doughorn@google.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200902210847.2689-2-gurchetansingh@chromium.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30rtl8xxxu: prevent potential memory leakChris Chiu
[ Upstream commit 86279456a4d47782398d3cb8193f78f672e36cac ] Free the skb if usb_submit_urb fails on rx_urb. And free the urb no matter usb_submit_urb succeeds or not in rtl8xxxu_submit_int_urb. Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200906040424.22022-1-chiu@endlessm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30brcmsmac: fix memory leak in wlc_phy_attach_lcnphyKeita Suzuki
[ Upstream commit f4443293d741d1776b86ed1dd8c4e4285d0775fc ] When wlc_phy_txpwr_srom_read_lcnphy fails in wlc_phy_attach_lcnphy, the allocated pi->u.pi_lcnphy is leaked, since struct brcms_phy will be freed in the caller function. Fix this by calling wlc_phy_detach_lcnphy in the error handler of wlc_phy_txpwr_srom_read_lcnphy before returning. Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200908121743.23108-1-keitasuzuki.park@sslab.ics.keio.ac.jp Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30scsi: ibmvfc: Fix error return in ibmvfc_probe()Jing Xiangfeng
[ Upstream commit 5e48a084f4e824e1b624d3fd7ddcf53d2ba69e53 ] Fix to return error code PTR_ERR() from the error handling case instead of 0. Link: https://lore.kernel.org/r/20200907083949.154251-1-jingxiangfeng@huawei.com Acked-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30usb: ohci: Default to per-port over-current protectionHamish Martin
[ Upstream commit b77d2a0a223bc139ee8904991b2922d215d02636 ] Some integrated OHCI controller hubs do not expose all ports of the hub to pins on the SoC. In some cases the unconnected ports generate spurious over-current events. For example the Broadcom 56060/Ranger 2 SoC contains a nominally 3 port hub but only the first port is wired. Default behaviour for ohci-platform driver is to use global over-current protection mode (AKA "ganged"). This leads to the spurious over-current events affecting all ports in the hub. We now alter the default to use per-port over-current protection. This patch results in the following configuration changes depending on quirks: - For quirk OHCI_QUIRK_SUPERIO no changes. These systems remain set up for ganged power switching and no over-current protection. - For quirk OHCI_QUIRK_AMD756 or OHCI_QUIRK_HUB_POWER power switching remains at none, while over-current protection is now guaranteed to be set to per-port rather than the previous behaviour where it was either none or global over-current protection depending on the value at function entry. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20200910212512.16670-1-hamish.martin@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30misc: rtsx: Fix memory leak in rtsx_pci_probeKeita Suzuki
[ Upstream commit bc28369c6189009b66d9619dd9f09bd8c684bb98 ] When mfd_add_devices() fail, pcr->slots should also be freed. However, the current implementation does not free the member, leading to a memory leak. Fix this by adding a new goto label that frees pcr->slots. Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp> Link: https://lore.kernel.org/r/20200909071853.4053-1-keitasuzuki.park@sslab.ics.keio.ac.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30ath9k: hif_usb: fix race condition between usb_get_urb() and ↵Brooke Basile
usb_kill_anchored_urbs() [ Upstream commit 03fb92a432ea5abe5909bca1455b7e44a9380480 ] Calls to usb_kill_anchored_urbs() after usb_kill_urb() on multiprocessor systems create a race condition in which usb_kill_anchored_urbs() deallocates the URB before the completer callback is called in usb_kill_urb(), resulting in a use-after-free. To fix this, add proper lock protection to usb_kill_urb() calls that can possibly run concurrently with usb_kill_anchored_urbs(). Reported-by: syzbot+89bd486af9427a9fc605@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=cabffad18eb74197f84871802fd2c5117b61febf Signed-off-by: Brooke Basile <brookebasile@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200911071427.32354-1-brookebasile@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30can: flexcan: flexcan_chip_stop(): add error handling and propagate error valueJoakim Zhang
[ Upstream commit 9ad02c7f4f279504bdd38ab706fdc97d5f2b2a9c ] This patch implements error handling and propagates the error value of flexcan_chip_stop(). This function will be called from flexcan_suspend() in an upcoming patch in some SoCs which support LPSR mode. Add a new function flexcan_chip_stop_disable_on_error() that tries to disable the chip even in case of errors. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> [mkl: introduce flexcan_chip_stop_disable_on_error() and use it in flexcan_close()] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200922144429.2613631-11-mkl@pengutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30usb: dwc3: simple: add support for Hikey 970Mauro Carvalho Chehab
[ Upstream commit b68d9251561f33661e53dd618f1cafe7ec9ec3c2 ] This binding driver is needed for Hikey 970 to work, as otherwise a Serror is produced: [ 1.837458] SError Interrupt on CPU0, code 0xbf000002 -- SError [ 1.837462] CPU: 0 PID: 74 Comm: kworker/0:1 Not tainted 5.8.0+ #205 [ 1.837463] Hardware name: HiKey970 (DT) [ 1.837465] Workqueue: events deferred_probe_work_func [ 1.837467] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--) [ 1.837468] pc : _raw_spin_unlock_irqrestore+0x18/0x50 [ 1.837469] lr : regmap_unlock_spinlock+0x14/0x20 [ 1.837470] sp : ffff8000124dba60 [ 1.837471] x29: ffff8000124dba60 x28: 0000000000000000 [ 1.837474] x27: ffff0001b7e854c8 x26: ffff80001204ea18 [ 1.837476] x25: 0000000000000005 x24: ffff800011f918f8 [ 1.837479] x23: ffff800011fbb588 x22: ffff0001b7e40e00 [ 1.837481] x21: 0000000000000100 x20: 0000000000000000 [ 1.837483] x19: ffff0001b767ec00 x18: 00000000ff10c000 [ 1.837485] x17: 0000000000000002 x16: 0000b0740fdb9950 [ 1.837488] x15: ffff8000116c1198 x14: ffffffffffffffff [ 1.837490] x13: 0000000000000030 x12: 0101010101010101 [ 1.837493] x11: 0000000000000020 x10: ffff0001bf17d130 [ 1.837495] x9 : 0000000000000000 x8 : ffff0001b6938080 [ 1.837497] x7 : 0000000000000000 x6 : 000000000000003f [ 1.837500] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.837502] x3 : ffff80001096a880 x2 : 0000000000000000 [ 1.837505] x1 : ffff0001b7e40e00 x0 : 0000000100000001 [ 1.837507] Kernel panic - not syncing: Asynchronous SError Interrupt [ 1.837509] CPU: 0 PID: 74 Comm: kworker/0:1 Not tainted 5.8.0+ #205 [ 1.837510] Hardware name: HiKey970 (DT) [ 1.837511] Workqueue: events deferred_probe_work_func [ 1.837513] Call trace: [ 1.837514] dump_backtrace+0x0/0x1e0 [ 1.837515] show_stack+0x18/0x24 [ 1.837516] dump_stack+0xc0/0x11c [ 1.837517] panic+0x15c/0x324 [ 1.837518] nmi_panic+0x8c/0x90 [ 1.837519] arm64_serror_panic+0x78/0x84 [ 1.837520] do_serror+0x158/0x15c [ 1.837521] el1_error+0x84/0x100 [ 1.837522] _raw_spin_unlock_irqrestore+0x18/0x50 [ 1.837523] regmap_write+0x58/0x80 [ 1.837524] hi3660_reset_deassert+0x28/0x34 [ 1.837526] reset_control_deassert+0x50/0x260 [ 1.837527] reset_control_deassert+0xf4/0x260 [ 1.837528] dwc3_probe+0x5dc/0xe6c [ 1.837529] platform_drv_probe+0x54/0xb0 [ 1.837530] really_probe+0xe0/0x490 [ 1.837531] driver_probe_device+0xf4/0x160 [ 1.837532] __device_attach_driver+0x8c/0x114 [ 1.837533] bus_for_each_drv+0x78/0xcc [ 1.837534] __device_attach+0x108/0x1a0 [ 1.837535] device_initial_probe+0x14/0x20 [ 1.837537] bus_probe_device+0x98/0xa0 [ 1.837538] deferred_probe_work_func+0x88/0xe0 [ 1.837539] process_one_work+0x1cc/0x350 [ 1.837540] worker_thread+0x2c0/0x470 [ 1.837541] kthread+0x154/0x160 [ 1.837542] ret_from_fork+0x10/0x30 [ 1.837569] SMP: stopping secondary CPUs [ 1.837570] Kernel Offset: 0x1d0000 from 0xffff800010000000 [ 1.837571] PHYS_OFFSET: 0x0 [ 1.837572] CPU features: 0x240002,20882004 [ 1.837573] Memory Limit: none Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30USB: cdc-acm: handle broken union descriptorsJohan Hovold
[ Upstream commit 960c7339de27c6d6fec13b54880501c3576bb08d ] Handle broken union functional descriptors where the master-interface doesn't exist or where its class is of neither Communication or Data type (as required by the specification) by falling back to "combined-interface" probing. Note that this still allows for handling union descriptors with switched interfaces. This specifically makes the Whistler radio scanners TRX series devices work with the driver without adding further quirks to the device-id table. Reported-by: Daniel Caujolle-Bert <f1rmb.daniel@gmail.com> Tested-by: Daniel Caujolle-Bert <f1rmb.daniel@gmail.com> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20200921135951.24045-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30usb: gadget: function: printer: fix use-after-free in __lock_acquireZqiang
[ Upstream commit e8d5f92b8d30bb4ade76494490c3c065e12411b1 ] Fix this by increase object reference count. BUG: KASAN: use-after-free in __lock_acquire+0x3fd4/0x4180 kernel/locking/lockdep.c:3831 Read of size 8 at addr ffff8880683b0018 by task syz-executor.0/3377 CPU: 1 PID: 3377 Comm: syz-executor.0 Not tainted 5.6.11 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xce/0x128 lib/dump_stack.c:118 print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374 __kasan_report+0x131/0x1b0 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:641 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135 __lock_acquire+0x3fd4/0x4180 kernel/locking/lockdep.c:3831 lock_acquire+0x127/0x350 kernel/locking/lockdep.c:4488 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 printer_ioctl+0x4a/0x110 drivers/usb/gadget/function/f_printer.c:723 vfs_ioctl fs/ioctl.c:47 [inline] ksys_ioctl+0xfb/0x130 fs/ioctl.c:763 __do_sys_ioctl fs/ioctl.c:772 [inline] __se_sys_ioctl fs/ioctl.c:770 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:770 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4531a9 Code: ed 60 fc ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 bb 60 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fd14ad72c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000000000073bfa8 RCX: 00000000004531a9 RDX: fffffffffffffff9 RSI: 000000000000009e RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004bbd61 R13: 00000000004d0a98 R14: 00007fd14ad736d4 R15: 00000000ffffffff Allocated by task 2393: save_stack+0x21/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] __kasan_kmalloc.constprop.3+0xa7/0xd0 mm/kasan/common.c:515 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:529 kmem_cache_alloc_trace+0xfa/0x2d0 mm/slub.c:2813 kmalloc include/linux/slab.h:555 [inline] kzalloc include/linux/slab.h:669 [inline] gprinter_alloc+0xa1/0x870 drivers/usb/gadget/function/f_printer.c:1416 usb_get_function+0x58/0xc0 drivers/usb/gadget/functions.c:61 config_usb_cfg_link+0x1ed/0x3e0 drivers/usb/gadget/configfs.c:444 configfs_symlink+0x527/0x11d0 fs/configfs/symlink.c:202 vfs_symlink+0x33d/0x5b0 fs/namei.c:4201 do_symlinkat+0x11b/0x1d0 fs/namei.c:4228 __do_sys_symlinkat fs/namei.c:4242 [inline] __se_sys_symlinkat fs/namei.c:4239 [inline] __x64_sys_symlinkat+0x73/0xb0 fs/namei.c:4239 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 3368: save_stack+0x21/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] kasan_set_free_info mm/kasan/common.c:337 [inline] __kasan_slab_free+0x135/0x190 mm/kasan/common.c:476 kasan_slab_free+0xe/0x10 mm/kasan/common.c:485 slab_free_hook mm/slub.c:1444 [inline] slab_free_freelist_hook mm/slub.c:1477 [inline] slab_free mm/slub.c:3034 [inline] kfree+0xf7/0x410 mm/slub.c:3995 gprinter_free+0x49/0xd0 drivers/usb/gadget/function/f_printer.c:1353 usb_put_function+0x38/0x50 drivers/usb/gadget/functions.c:87 config_usb_cfg_unlink+0x2db/0x3b0 drivers/usb/gadget/configfs.c:485 configfs_unlink+0x3b9/0x7f0 fs/configfs/symlink.c:250 vfs_unlink+0x287/0x570 fs/namei.c:4073 do_unlinkat+0x4f9/0x620 fs/namei.c:4137 __do_sys_unlink fs/namei.c:4184 [inline] __se_sys_unlink fs/namei.c:4182 [inline] __x64_sys_unlink+0x42/0x50 fs/namei.c:4182 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8880683b0000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 24 bytes inside of 1024-byte region [ffff8880683b0000, ffff8880683b0400) The buggy address belongs to the page: page:ffffea0001a0ec00 refcount:1 mapcount:0 mapping:ffff88806c00e300 index:0xffff8880683b1800 compound_mapcount: 0 flags: 0x100000000010200(slab|head) raw: 0100000000010200 0000000000000000 0000000600000001 ffff88806c00e300 raw: ffff8880683b1800 000000008010000a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Reported-by: Kyungtae Kim <kt0755@gmail.com> Signed-off-by: Zqiang <qiang.zhang@windriver.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30misc: vop: add round_up(x,4) for vring_size to avoid kernel panicSherry Sun
[ Upstream commit cc1a2679865a94b83804822996eed010a50a7c1d ] Since struct _mic_vring_info and vring are allocated together and follow vring, if the vring_size() is not four bytes aligned, which will cause the start address of struct _mic_vring_info is not four byte aligned. For example, when vring entries is 128, the vring_size() will be 5126 bytes. The _mic_vring_info struct layout in ddr looks like: 0x90002400: 00000000 00390000 EE010000 0000C0FF Here 0x39 is the avail_idx member, and 0xC0FFEE01 is the magic member. When EP use ioread32(magic) to reads the magic in RC's share memory, it will cause kernel panic on ARM64 platform due to the cross-byte io read. Here read magic in user space use le32toh(vr0->info->magic) will meet the same issue. So add round_up(x,4) for vring_size, then the struct _mic_vring_info will store in this way: 0x90002400: 00000000 00000000 00000039 C0FFEE01 Which will avoid kernel panic when read magic in struct _mic_vring_info. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20200929091106.24624-4-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30mic: vop: copy data to kernel space then write to io memorySherry Sun
[ Upstream commit 675f0ad4046946e80412896436164d172cd92238 ] Read and write io memory should address align on ARCH ARM. Change to use memcpy_toio to avoid kernel panic caused by the address un-align issue. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20200929091106.24624-5-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30scsi: mvumi: Fix error return in mvumi_io_attach()Jing Xiangfeng
[ Upstream commit 055f15ab2cb4a5cbc4c0a775ef3d0066e0fa9b34 ] Return PTR_ERR() from the error handling case instead of 0. Link: https://lore.kernel.org/r/20200910123848.93649-1-jingxiangfeng@huawei.com Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30media: venus: core: Fix runtime PM imbalance in venus_probeDinghao Liu
[ Upstream commit bbe516e976fce538db96bd2b7287df942faa14a3 ] pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. For other error paths after this call, things are the same. Fix this by adding pm_runtime_put_noidle() after 'err_runtime_disable' label. But in this case, the error path after pm_runtime_put_sync() will decrease PM usage counter twice. Thus add an extra pm_runtime_get_noresume() in this path to balance PM counter. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30media: saa7134: avoid a shift overflowMauro Carvalho Chehab
[ Upstream commit 15a36aae1ec1c1f17149b6113b92631791830740 ] As reported by smatch: drivers/media/pci/saa7134//saa7134-tvaudio.c:686 saa_dsp_writel() warn: should 'reg << 2' be a 64 bit type? On a 64-bits Kernel, the shift might be bigger than 32 bits. In real, this should never happen, but let's shut up the warning. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30mmc: sdio: Check for CISTPL_VERS_1 buffer sizePali Rohár
[ Upstream commit 8ebe2607965d3e2dc02029e8c7dd35fbe508ffd0 ] Before parsing CISTPL_VERS_1 structure check that its size is at least two bytes to prevent buffer overflow. Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20200727133837.19086-2-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30media: uvcvideo: Ensure all probed info is returned to v4l2Adam Goode
[ Upstream commit 8a652a17e3c005dcdae31b6c8fdf14382a29cbbe ] bFrameIndex and bFormatIndex can be negotiated by the camera during probing, resulting in the camera choosing a different format than expected. v4l2 can already accommodate such changes, but the code was not updating the proper fields. Without such a change, v4l2 would potentially interpret the payload incorrectly, causing corrupted output. This was happening on the Elgato HD60 S+, which currently always renegotiates to format 1. As an aside, the Elgato firmware is buggy and should not be renegotating, but it is still a valid thing for the camera to do. Both macOS and Windows will properly probe and read uncorrupted images from this camera. With this change, both qv4l2 and chromium can now read uncorrupted video from the Elgato HD60 S+. [Add blank lines, remove periods at the of messages] Signed-off-by: Adam Goode <agoode@google.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30media: media/pci: prevent memory leak in bttv_probeXiaolong Huang
[ Upstream commit 7b817585b730665126b45df5508dd69526448bc8 ] In bttv_probe if some functions such as pci_enable_device, pci_set_dma_mask and request_mem_region fails the allocated memory for btv should be released. Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30media: bdisp: Fix runtime PM imbalance on errorDinghao Liu
[ Upstream commit dbd2f2dc025f9be8ae063e4f270099677238f620 ] pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30media: platform: sti: hva: Fix runtime PM imbalance on errorDinghao Liu
[ Upstream commit d912a1d9e9afe69c6066c1ceb6bfc09063074075 ] pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30media: platform: s3c-camif: Fix runtime PM imbalance on errorDinghao Liu
[ Upstream commit dafa3605fe60d5a61239d670919b2a36e712481e ] pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Also, call pm_runtime_disable() when pm_runtime_get_sync() returns an error code. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Sylwester Nawrocki <snawrocki@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30media: vsp1: Fix runtime PM imbalance on errorDinghao Liu
[ Upstream commit 98fae901c8883640202802174a4bd70a1b9118bd ] pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30media: exynos4-is: Fix a reference count leakQiushi Wu
[ Upstream commit 64157b2cb1940449e7df2670e85781c690266588 ] pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code, causing incorrect ref count if pm_runtime_put_noidle() is not called in error handling paths. Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails. Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30media: exynos4-is: Fix a reference count leak due to pm_runtime_get_syncQiushi Wu
[ Upstream commit c47f7c779ef0458a58583f00c9ed71b7f5a4d0a2 ] On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error. Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30media: exynos4-is: Fix several reference count leaks due to pm_runtime_get_syncQiushi Wu
[ Upstream commit 7ef64ceea0008c17e94a8a2c60c5d6d46f481996 ] On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error. Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30media: sti: Fix reference count leaksQiushi Wu
[ Upstream commit 6f4432bae9f2d12fc1815b5e26cc07e69bcad0df ] pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code, causing incorrect ref count if pm_runtime_put_noidle() is not called in error handling paths. Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails. Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30media: st-delta: Fix reference count leak in delta_run_workAditya Pakki
[ Upstream commit 57cc666d36adc7b45e37ba4cd7bc4e44ec4c43d7 ] delta_run_work() calls delta_get_sync() that increments the reference counter. In case of failure, decrement the reference count by calling delta_put_autosuspend(). Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30media: ati_remote: sanity check for both endpointsOliver Neukum
[ Upstream commit a8be80053ea74bd9c3f9a3810e93b802236d6498 ] If you do sanity checks, you should do them for both endpoints. Hence introduce checking for endpoint type for the output endpoint, too. Reported-by: syzbot+998261c2ae5932458f6c@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30media: firewire: fix memory leakPavel Machek
[ Upstream commit b28e32798c78a346788d412f1958f36bb760ec03 ] Fix memory leak in node_probe. Signed-off-by: Pavel Machek (CIP) <pavel@denx.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30crypto: ccp - fix error handlingPavel Machek
[ Upstream commit e356c49c6cf0db3f00e1558749170bd56e47652d ] Fix resource leak in error handling. Signed-off-by: Pavel Machek (CIP) <pavel@denx.de> Acked-by: John Allen <john.allen@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30i2c: core: Restore acpi_walk_dep_device_list() getting called after ↵Hans de Goede
registering the ACPI i2c devs [ Upstream commit 8058d69905058ec8f467a120b5ec5bb831ea67f3 ] Commit 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()")'s intention was to only move the acpi_install_address_space_handler() call to the point before where the ACPI declared i2c-children of the adapter where instantiated by i2c_acpi_register_devices(). But i2c_acpi_install_space_handler() had a call to acpi_walk_dep_device_list() hidden (that is I missed it) at the end of it, so as an unwanted side-effect now acpi_walk_dep_device_list() was also being called before i2c_acpi_register_devices(). Move the acpi_walk_dep_device_list() call to the end of i2c_acpi_register_devices(), so that it is once again called *after* the i2c_client-s hanging of the adapter have been created. This fixes the Microsoft Surface Go 2 hanging at boot. Fixes: 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()") Link: https://bugzilla.kernel.org/show_bug.cgi?id=209627 Reported-by: Rainer Finke <rainer@finke.cc> Reported-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Suggested-by: Maximilian Luz <luzmaximilian@gmail.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30NTB: hw: amd: fix an issue about leak system resourcesKaige Li
[ Upstream commit 44a0a3c17919db1498cebb02ecf3cf4abc1ade7b ] The related system resources were not released when pci_set_dma_mask(), pci_set_consistent_dma_mask(), or pci_iomap() return error in the amd_ntb_init_pci() function. Add pci_release_regions() to fix it. Fixes: a1b3695820aa ("NTB: Add support for AMD PCI-Express Non-Transparent Bridge") Signed-off-by: Kaige Li <likaige@loongson.cn> Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30nvmet: fix uninitialized work for zero katozhenwei pi
[ Upstream commit 85bd23f3dc09a2ae9e56885420e52c54bf983713 ] When connecting a controller with a zero kato value using the following command line nvme connect -t tcp -n NQN -a ADDR -s PORT --keep-alive-tmo=0 the warning below can be reproduced: WARNING: CPU: 1 PID: 241 at kernel/workqueue.c:1627 __queue_delayed_work+0x6d/0x90 with trace: mod_delayed_work_on+0x59/0x90 nvmet_update_cc+0xee/0x100 [nvmet] nvmet_execute_prop_set+0x72/0x80 [nvmet] nvmet_tcp_try_recv_pdu+0x2f7/0x770 [nvmet_tcp] nvmet_tcp_io_work+0x63f/0xb2d [nvmet_tcp] ... This is caused by queuing up an uninitialized work. Althrough the keep-alive timer is disabled during allocating the controller (fixed in 0d3b6a8d213a), ka_work still has a chance to run (called by nvmet_start_ctrl). Fixes: 0d3b6a8d213a ("nvmet: Disable keep-alive timer when kato is cleared to 0h") Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30memory: fsl-corenet-cf: Fix handling of platform_get_irq() errorKrzysztof Kozlowski
[ Upstream commit dd85345abca60a8916617e8d75c0f9ce334336dd ] platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check. Fixes: 54afbec0d57f ("memory: Freescale CoreNet Coherency Fabric error reporting driver") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200827073315.29351-1-krzk@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-30memory: omap-gpmc: Fix build error without CONFIG_OFYueHaibing
[ Upstream commit 13d029ee51da365aa9c859db0c7395129252bde8 ] If CONFIG_OF is n, gcc fails: drivers/memory/omap-gpmc.o: In function `gpmc_omap_onenand_set_timings': omap-gpmc.c:(.text+0x2a88): undefined reference to `gpmc_read_settings_dt' Add gpmc_read_settings_dt() helper function, which zero the gpmc_settings so the caller doesn't proceed with random/invalid settings. Fixes: a758f50f10cf ("mtd: onenand: omap2: Configure driver from DT") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Roger Quadros <rogerq@ti.com> Link: https://lore.kernel.org/r/20200827125316.20780-1-yuehaibing@huawei.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.46.0) at 2026-01-23 11:14:40 +0000