summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-02-10iommu/vt-d: Do not use flush-queue when caching-mode is onNadav Amit
commit 29b32839725f8c89a41cb6ee054c85f3116ea8b5 upstream. When an Intel IOMMU is virtualized, and a physical device is passed-through to the VM, changes of the virtual IOMMU need to be propagated to the physical IOMMU. The hypervisor therefore needs to monitor PTE mappings in the IOMMU page-tables. Intel specifications provide "caching-mode" capability that a virtual IOMMU uses to report that the IOMMU is virtualized and a TLB flush is needed after mapping to allow the hypervisor to propagate virtual IOMMU mappings to the physical IOMMU. To the best of my knowledge no real physical IOMMU reports "caching-mode" as turned on. Synchronizing the virtual and the physical IOMMU tables is expensive if the hypervisor is unaware which PTEs have changed, as the hypervisor is required to walk all the virtualized tables and look for changes. Consequently, domain flushes are much more expensive than page-specific flushes on virtualized IOMMUs with passthrough devices. The kernel therefore exploited the "caching-mode" indication to avoid domain flushing and use page-specific flushing in virtualized environments. See commit 78d5f0f500e6 ("intel-iommu: Avoid global flushes with caching mode.") This behavior changed after commit 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing"). Now, when batched TLB flushing is used (the default), full TLB domain flushes are performed frequently, requiring the hypervisor to perform expensive synchronization between the virtual TLB and the physical one. Getting batched TLB flushes to use page-specific invalidations again in such circumstances is not easy, since the TLB invalidation scheme assumes that "full" domain TLB flushes are performed for scalability. Disable batched TLB flushes when caching-mode is on, as the performance benefit from using batched TLB invalidations is likely to be much smaller than the overhead of the virtual-to-physical IOMMU page-tables synchronization. Fixes: 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Will Deacon <will@kernel.org> Cc: stable@vger.kernel.org Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210127175317.1600473-1-namit@vmware.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10ACPI: thermal: Do not call acpi_thermal_check() directlyRafael J. Wysocki
commit 81b704d3e4674e09781d331df73d76675d5ad8cb upstream. Calling acpi_thermal_check() from acpi_thermal_notify() directly is problematic if _TMP triggers Notify () on the thermal zone for which it has been evaluated (which happens on some systems), because it causes a new acpi_thermal_notify() invocation to be queued up every time and if that takes place too often, an indefinite number of pending work items may accumulate in kacpi_notify_wq over time. Besides, it is not really useful to queue up a new invocation of acpi_thermal_check() if one of them is pending already. For these reasons, rework acpi_thermal_notify() to queue up a thermal check instead of calling acpi_thermal_check() directly and only allow one thermal check to be pending at a time. Moreover, only allow one acpi_thermal_check_fn() instance at a time to run thermal_zone_device_update() for one thermal zone and make it return early if it sees other instances running for the same thermal zone. While at it, fold acpi_thermal_check() into acpi_thermal_check_fn(), as it is only called from there after the other changes made here. [This issue appears to have been exposed by commit 6d25be5782e4 ("sched/core, workqueues: Distangle worker accounting from rq lock"), but it is unclear why it was not visible earlier.] BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208877 Reported-by: Stephen Berman <stephen.berman@gmx.net> Diagnosed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Stephen Berman <stephen.berman@gmx.net> Cc: All applicable <stable@vger.kernel.org> [bigeasy: Backported to v4.9.y, use atomic_t instead of refcount_t] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10Input: xpad - sync supported devices with fork on GitHubBenjamin Valentin
commit 9bbd77d5bbc9aff8cb74d805c31751f5f0691ba8 upstream. There is a fork of this driver on GitHub [0] that has been updated with new device IDs. Merge those into the mainline driver, so the out-of-tree fork is not needed for users of those devices anymore. [0] https://github.com/paroj/xpad Signed-off-by: Benjamin Valentin <benpicco@googlemail.com> Link: https://lore.kernel.org/r/20210121142523.1b6b050f@rechenknecht2k11 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10mmc: core: Limit retries when analyse of SDIO tuples failsFengnan Chang
commit f92e04f764b86e55e522988e6f4b6082d19a2721 upstream. When analysing tuples fails we may loop indefinitely to retry. Let's avoid this by using a 10s timeout and bail if not completed earlier. Signed-off-by: Fengnan Chang <fengnanchang@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210123033230.36442-1-fengnanchang@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10xhci: fix bounce buffer usage for non-sg list caseMathias Nyman
commit d4a610635400ccc382792f6be69427078541c678 upstream. xhci driver may in some special cases need to copy small amounts of payload data to a bounce buffer in order to meet the boundary and alignment restrictions set by the xHCI specification. In the majority of these cases the data is in a sg list, and driver incorrectly assumed data is always in urb->sg when using the bounce buffer. If data instead is contiguous, and in urb->transfer_buffer, we may still need to bounce buffer a small part if data starts very close (less than packet size) to a 64k boundary. Check if sg list is used before copying data to/from it. Fixes: f9c589e142d0 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer") Cc: stable@vger.kernel.org Reported-by: Andreas Hartmann <andihartmann@01019freenet.de> Tested-by: Andreas Hartmann <andihartmann@01019freenet.de> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210203113702.436762-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10usb: dwc2: Fix endpoint direction check in ep_from_windexHeiko Stuebner
commit f670e9f9c8cac716c3506c6bac9e997b27ad441a upstream. dwc2_hsotg_process_req_status uses ep_from_windex() to retrieve the endpoint for the index provided in the wIndex request param. In a test-case with a rndis gadget running and sending a malformed packet to it like: dev.ctrl_transfer( 0x82, # bmRequestType 0x00, # bRequest 0x0000, # wValue 0x0001, # wIndex 0x00 # wLength ) it is possible to cause a crash: [ 217.533022] dwc2 ff300000.usb: dwc2_hsotg_process_req_status: USB_REQ_GET_STATUS [ 217.559003] Unable to handle kernel read from unreadable memory at virtual address 0000000000000088 ... [ 218.313189] Call trace: [ 218.330217] ep_from_windex+0x3c/0x54 [ 218.348565] usb_gadget_giveback_request+0x10/0x20 [ 218.368056] dwc2_hsotg_complete_request+0x144/0x184 This happens because ep_from_windex wants to compare the endpoint direction even if index_to_ep() didn't return an endpoint due to the direction not matching. The fix is easy insofar that the actual direction check is already happening when calling index_to_ep() which will return NULL if there is no endpoint for the targeted direction, so the offending check can go away completely. Fixes: c6f5c050e2a7 ("usb: dwc2: gadget: add bi-directional endpoint support") Cc: stable@vger.kernel.org Reported-by: Gerhard Klostermeier <gerhard.klostermeier@syss.de> Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20210127103919.58215-1-heiko@sntech.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10USB: usblp: don't call usb_set_interface if there's a single altJeremy Figgins
commit d8c6edfa3f4ee0d45d7ce5ef18d1245b78774b9d upstream. Some devices, such as the Winbond Electronics Corp. Virtual Com Port (Vendor=0416, ProdId=5011), lockup when usb_set_interface() or usb_clear_halt() are called. This device has only a single altsetting, so it should not be necessary to call usb_set_interface(). Acked-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Jeremy Figgins <kernel@jeremyfiggins.com> Link: https://lore.kernel.org/r/YAy9kJhM/rG8EQXC@watson Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10USB: gadget: legacy: fix an error code in eth_bind()Dan Carpenter
commit 3e1f4a2e1184ae6ad7f4caf682ced9554141a0f4 upstream. This code should return -ENOMEM if the allocation fails but it currently returns success. Fixes: 9b95236eebdb ("usb: gadget: ether: allocate and init otg descriptor by otg capabilities") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YBKE9rqVuJEOUWpW@mwanda Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10Input: i8042 - unbreak Pegatron C15BAlexey Dobriyan
[ Upstream commit a3a9060ecad030e2c7903b2b258383d2c716b56c ] g++ reports drivers/input/serio/i8042-x86ia64io.h:225:3: error: ‘.matches’ designator used multiple times in the same initializer list C99 semantics is that last duplicated initialiser wins, so DMI entry gets overwritten. Fixes: a48491c65b51 ("Input: i8042 - add ByteSpeed touchpad to noloop table") Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Link: https://lore.kernel.org/r/20201228072335.GA27766@localhost.localdomain Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-10USB: serial: option: Adding support for Cinterion MV31Christoph Schemmel
commit e478d6029dca9d8462f426aee0d32896ef64f10f upstream. Adding support for Cinterion device MV31 for enumeration with PID 0x00B3 and 0x00B7. usb-devices output for 0x00B3 T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=1e2d ProdID=00b3 Rev=04.14 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00B3 USB Mobile Broadband S: SerialNumber=b3246eed C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=cdc_wdm I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option usb-devices output for 0x00B7 T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=1e2d ProdID=00b7 Rev=04.14 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00B3 USB Mobile Broadband S: SerialNumber=b3246eed C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Signed-off-by: Christoph Schemmel <christoph.schemmel@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10USB: serial: cp210x: add new VID/PID for supporting Teraoka AD2000Chenxin Jin
commit 43377df70480f82919032eb09832e9646a8a5efb upstream. Teraoka AD2000 uses the CP210x driver, but the chip VID/PID is customized with 0988/0578. We need the driver to support the new VID/PID. Signed-off-by: Chenxin Jin <bg4akv@hotmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10USB: serial: cp210x: add pid/vid for WSDA-200-USBPho Tran
commit 3c4f6ecd93442f4376a58b38bb40ee0b8c46e0e6 upstream. Information pid/vid of WSDA-200-USB, Lord corporation company: vid: 199b pid: ba30 Signed-off-by: Pho Tran <pho.tran@silabs.com> [ johan: amend comment with product name ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10scsi: ibmvfc: Set default timeout to avoid crash during migrationBrian King
[ Upstream commit 764907293edc1af7ac857389af9dc858944f53dc ] While testing live partition mobility, we have observed occasional crashes of the Linux partition. What we've seen is that during the live migration, for specific configurations with large amounts of memory, slow network links, and workloads that are changing memory a lot, the partition can end up being suspended for 30 seconds or longer. This resulted in the following scenario: CPU 0 CPU 1 ------------------------------- ---------------------------------- scsi_queue_rq migration_store -> blk_mq_start_request -> rtas_ibm_suspend_me -> blk_add_timer -> on_each_cpu(rtas_percpu_suspend_me _______________________________________V | V -> IPI from CPU 1 -> rtas_percpu_suspend_me -> __rtas_suspend_last_cpu -- Linux partition suspended for > 30 seconds -- -> for_each_online_cpu(cpu) plpar_hcall_norets(H_PROD -> scsi_dispatch_cmd -> scsi_times_out -> scsi_abort_command -> queue_delayed_work -> ibmvfc_queuecommand_lck -> ibmvfc_send_event -> ibmvfc_send_crq - returns H_CLOSED <- returns SCSI_MLQUEUE_HOST_BUSY -> __blk_mq_requeue_request -> scmd_eh_abort_handler -> scsi_try_to_abort_cmd - returns SUCCESS -> scsi_queue_insert Normally, the SCMD_STATE_COMPLETE bit would protect against the command completion and the timeout, but that doesn't work here, since we don't check that at all in the SCSI_MLQUEUE_HOST_BUSY path. In this case we end up calling scsi_queue_insert on a request that has already been queued, or possibly even freed, and we crash. The patch below simply increases the default I/O timeout to avoid this race condition. This is also the timeout value that nearly all IBM SAN storage recommends setting as the default value. Link: https://lore.kernel.org/r/1610463998-19791-1-git-send-email-brking@linux.vnet.ibm.com Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-10scsi: libfc: Avoid invoking response handler twice if ep is already completedJaved Hasan
[ Upstream commit b2b0f16fa65e910a3ec8771206bb49ee87a54ac5 ] A race condition exists between the response handler getting called because of exchange_mgr_reset() (which clears out all the active XIDs) and the response we get via an interrupt. Sequence of events: rport ba0200: Port timeout, state PLOGI rport ba0200: Port entered PLOGI state from PLOGI state xid 1052: Exchange timer armed : 20000 msecs  xid timer armed here rport ba0200: Received LOGO request while in state PLOGI rport ba0200: Delete port rport ba0200: work event 3 rport ba0200: lld callback ev 3 bnx2fc: rport_event_hdlr: event = 3, port_id = 0xba0200 bnx2fc: ba0200 - rport not created Yet!! /* Here we reset any outstanding exchanges before freeing rport using the exch_mgr_reset() */ xid 1052: Exchange timer canceled /* Here we got two responses for one xid */ xid 1052: invoking resp(), esb 20000000 state 3 xid 1052: invoking resp(), esb 20000000 state 3 xid 1052: fc_rport_plogi_resp() : ep->resp_active 2 xid 1052: fc_rport_plogi_resp() : ep->resp_active 2 Skip the response if the exchange is already completed. Link: https://lore.kernel.org/r/20201215194731.2326-1-jhasan@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-10ibmvnic: Ensure that CRQ entry read are correctly orderedLijun Pan
commit e41aec79e62fa50f940cf222d1e9577f14e149dc upstream. Ensure that received Command-Response Queue (CRQ) entries are properly read in order by the driver. dma_rmb barrier has been added before accessing the CRQ descriptor to ensure the entire descriptor is read before processing. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/20210128013442.88319-1-ljp@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10net: dsa: bcm_sf2: put device node before returnPan Bian
commit cf3c46631e1637582f517a574c77cd6c05793817 upstream. Put the device node dn before return error code on failure path. Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210121123343.26330-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-03iommu/vt-d: Don't dereference iommu_device if IOMMU_API is not builtBartosz Golaszewski
commit 9def3b1a07c41e21c68a0eb353e3e569fdd1d2b1 upstream. Since commit c40aaaac1018 ("iommu/vt-d: Gracefully handle DMAR units with no supported address widths") dmar.c needs struct iommu_device to be selected. We can drop this dependency by not dereferencing struct iommu_device if IOMMU_API is not selected and by reusing the information stored in iommu->drhd->ignored instead. This fixes the following build error when IOMMU_API is not selected: drivers/iommu/dmar.c: In function ‘free_iommu’: drivers/iommu/dmar.c:1139:41: error: ‘struct iommu_device’ has no member named ‘ops’ 1139 | if (intel_iommu_enabled && iommu->iommu.ops) { ^ Fixes: c40aaaac1018 ("iommu/vt-d: Gracefully handle DMAR units with no supported address widths") Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Link: https://lore.kernel.org/r/20201013073055.11262-1-brgl@bgdev.pl Signed-off-by: Joerg Roedel <jroedel@suse.de> [ - context change due to moving drivers/iommu/dmar.c to drivers/iommu/intel/dmar.c - set the drhr in the iommu like in upstream commit b1012ca8dc4f ("iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu") ] Signed-off-by: Filippo Sironi <sironi@amazon.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-03iommu/vt-d: Gracefully handle DMAR units with no supported address widthsDavid Woodhouse
commit c40aaaac1018ff1382f2d35df5129a6bcea3df6b upstream. Instead of bailing out completely, such a unit can still be used for interrupt remapping. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/linux-iommu/549928db2de6532117f36c9c810373c14cf76f51.camel@infradead.org/ Signed-off-by: Joerg Roedel <jroedel@suse.de> [ - context change due to moving drivers/iommu/dmar.c to drivers/iommu/intel/dmar.c - use iommu->iommu_dev instead of iommu->iommu.ops to decide whether when freeing ] Signed-off-by: Filippo Sironi <sironi@amazon.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-03can: dev: prevent potential information leak in can_fill_info()Dan Carpenter
[ Upstream commit b552766c872f5b0d90323b24e4c9e8fa67486dd5 ] The "bec" struct isn't necessarily always initialized. For example, the mcp251xfd_get_berr_counter() function doesn't initialize anything if the interface is down. Fixes: 52c793f24054 ("can: netlink support for bus-error reporting and counters") Link: https://lore.kernel.org/r/YAkaRdRJncsJO8Ve@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-03iwlwifi: pcie: reschedule in long-running memory readsJohannes Berg
[ Upstream commit 3d372c4edfd4dffb7dea71c6b096fb414782b776 ] If we spin for a long time in memory reads that (for some reason in hardware) take a long time, then we'll eventually get messages such as watchdog: BUG: soft lockup - CPU#2 stuck for 24s! [kworker/2:2:272] This is because the reading really does take a very long time, and we don't schedule, so we're hogging the CPU with this task, at least if CONFIG_PREEMPT is not set, e.g. with CONFIG_PREEMPT_VOLUNTARY=y. Previously I misinterpreted the situation and thought that this was only going to happen if we had interrupts disabled, and then fixed this (which is good anyway, however), but that didn't always help; looking at it again now I realized that the spin unlock will only reschedule if CONFIG_PREEMPT is used. In order to avoid this issue, change the code to cond_resched() if we've been spinning for too long here. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: 04516706bb99 ("iwlwifi: pcie: limit memory read spin time") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130253.217a9d6a6a12.If964cb582ab0aaa94e81c4ff3b279eaafda0fd3f@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-03iwlwifi: pcie: use jiffies for memory read spin time limitJohannes Berg
[ Upstream commit 6701317476bbfb1f341aa935ddf75eb73af784f9 ] There's no reason to use ktime_get() since we don't need any better precision than jiffies, and since we no longer disable interrupts around this code (when grabbing NIC access), jiffies will work fine. Use jiffies instead of ktime_get(). This cleanup is preparation for the following patch "iwlwifi: pcie: reschedule in long-running memory reads". The code gets simpler with the weird clock use etc. removed before we add cond_resched(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130253.621c948b1fad.I3ee9f4bc4e74a0c9125d42fb7c35cd80df4698a1@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-03RDMA/cxgb4: Fix the reported max_recv_sge valueKamal Heib
[ Upstream commit a372173bf314d374da4dd1155549d8ca7fc44709 ] The max_recv_sge value is wrongly reported when calling query_qp, This is happening due to a typo when assigning the max_recv_sge value, the value of sq_max_sges was assigned instead of rq_max_sges. Fixes: 3e5c02c9ef9a ("iw_cxgb4: Support query_qp() verb") Link: https://lore.kernel.org/r/20210114191423.423529-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-03mt7601u: fix rx buffer refcountingLorenzo Bianconi
commit d24c790577ef01bfa01da2b131313a38c843a634 upstream. Fix the following crash due to erroneous page refcounting: [ 32.445919] BUG: Bad page state in process swapper/1 pfn:11f65a [ 32.447409] page:00000000938f0632 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 pfn:0x11f65a [ 32.449605] flags: 0x8000000000000000() [ 32.450421] raw: 8000000000000000 ffffffff825b0148 ffffea00045ae988 0000000000000000 [ 32.451795] raw: 0000000000000000 0000000000000001 00000000ffffff7f 0000000000000000 [ 32.452999] page dumped because: nonzero mapcount [ 32.453888] Modules linked in: [ 32.454492] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.11.0-rc2+ #1976 [ 32.455695] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-1.fc33 04/01/2014 [ 32.457157] Call Trace: [ 32.457636] <IRQ> [ 32.457993] dump_stack+0x77/0x97 [ 32.458576] bad_page.cold+0x65/0x96 [ 32.459198] get_page_from_freelist+0x46a/0x11f0 [ 32.460008] __alloc_pages_nodemask+0x10a/0x2b0 [ 32.460794] mt7601u_rx_tasklet+0x651/0x720 [ 32.461505] tasklet_action_common.constprop.0+0x6b/0xd0 [ 32.462343] __do_softirq+0x152/0x46c [ 32.462928] asm_call_irq_on_stack+0x12/0x20 [ 32.463610] </IRQ> [ 32.463953] do_softirq_own_stack+0x5b/0x70 [ 32.464582] irq_exit_rcu+0x9f/0xe0 [ 32.465028] common_interrupt+0xae/0x1a0 [ 32.465536] asm_common_interrupt+0x1e/0x40 [ 32.466071] RIP: 0010:default_idle+0x18/0x20 [ 32.468981] RSP: 0018:ffffc90000077f00 EFLAGS: 00000246 [ 32.469648] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 [ 32.470550] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff81aac3dd [ 32.471463] RBP: ffff88810022ab00 R08: 0000000000000001 R09: 0000000000000001 [ 32.472335] R10: 0000000000000046 R11: 0000000000005aa0 R12: 0000000000000000 [ 32.473235] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 32.474139] ? default_idle_call+0x4d/0x200 [ 32.474681] default_idle_call+0x74/0x200 [ 32.475192] do_idle+0x1d5/0x250 [ 32.475612] cpu_startup_entry+0x19/0x20 [ 32.476114] secondary_startup_64_no_verify+0xb0/0xbb [ 32.476765] Disabling lock debugging due to kernel taint Fixes: c869f77d6abb ("add mt7601u driver") Co-developed-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/62b2380c8c2091834cfad05e1059b55f945bd114.1610643952.git.lorenzo@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-03mt7601u: fix kernel crash unplugging the deviceLorenzo Bianconi
commit 0acb20a5438c36e0cf2b8bf255f314b59fcca6ef upstream. The following crash log can occur unplugging the usb dongle since, after the urb poison in mt7601u_free_tx_queue(), usb_submit_urb() will always fail resulting in a skb kfree while the skb has been already queued. Fix the issue enqueuing the skb only if usb_submit_urb() succeed. Hardware name: Hewlett-Packard 500-539ng/2B2C, BIOS 80.06 04/01/2015 Workqueue: usb_hub_wq hub_event RIP: 0010:skb_trim+0x2c/0x30 RSP: 0000:ffffb4c88005bba8 EFLAGS: 00010206 RAX: 000000004ad483ee RBX: ffff9a236625dee0 RCX: 000000000000662f RDX: 000000000000000c RSI: 0000000000000000 RDI: ffff9a2343179300 RBP: ffff9a2343179300 R08: 0000000000000001 R09: 0000000000000000 R10: ffff9a23748f7840 R11: 0000000000000001 R12: ffff9a236625e4d4 R13: ffff9a236625dee0 R14: 0000000000001080 R15: 0000000000000008 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd410a34ef8 CR3: 00000001416ee001 CR4: 00000000001706f0 Call Trace: mt7601u_tx_status+0x3e/0xa0 [mt7601u] mt7601u_dma_cleanup+0xca/0x110 [mt7601u] mt7601u_cleanup+0x22/0x30 [mt7601u] mt7601u_disconnect+0x22/0x60 [mt7601u] usb_unbind_interface+0x8a/0x270 ? kernfs_find_ns+0x35/0xd0 __device_release_driver+0x17a/0x230 device_release_driver+0x24/0x30 bus_remove_device+0xdb/0x140 device_del+0x18b/0x430 ? kobject_put+0x98/0x1d0 usb_disable_device+0xc6/0x1f0 usb_disconnect.cold+0x7e/0x20a hub_event+0xbf3/0x1870 process_one_work+0x1b6/0x350 worker_thread+0x53/0x3e0 ? process_one_work+0x350/0x350 kthread+0x11b/0x140 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x22/0x30 Fixes: 23377c200b2eb ("mt7601u: fix possible memory leak when the device is disconnected") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/3b85219f669a63a8ced1f43686de05915a580489.1610919247.git.lorenzo@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-03leds: trigger: fix potential deadlock with libataAndrea Righi
commit 27af8e2c90fba242460b01fa020e6e19ed68c495 upstream. We have the following potential deadlock condition: ======================================================== WARNING: possible irq lock inversion dependency detected 5.10.0-rc2+ #25 Not tainted -------------------------------------------------------- swapper/3/0 just changed the state of lock: ffff8880063bd618 (&host->lock){-...}-{2:2}, at: ata_bmdma_interrupt+0x27/0x200 but this lock took another, HARDIRQ-READ-unsafe lock in the past: (&trig->leddev_list_lock){.+.?}-{2:2} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&trig->leddev_list_lock); local_irq_disable(); lock(&host->lock); lock(&trig->leddev_list_lock); <Interrupt> lock(&host->lock); *** DEADLOCK *** no locks held by swapper/3/0. the shortest dependencies between 2nd lock and 1st lock: -> (&trig->leddev_list_lock){.+.?}-{2:2} ops: 46 { HARDIRQ-ON-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 IN-SOFTIRQ-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 kbd_bh+0x9e/0xc0 tasklet_action_common.constprop.0+0xe9/0x100 tasklet_action+0x22/0x30 __do_softirq+0xcc/0x46d run_ksoftirqd+0x3f/0x70 smpboot_thread_fn+0x116/0x1f0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 SOFTIRQ-ON-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 INITIAL READ USE at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 } ... key at: [<ffffffff83da4c00>] __key.0+0x0/0x10 ... acquired at: _raw_read_lock+0x42/0x90 led_trigger_blink_oneshot+0x3b/0x90 ledtrig_disk_activity+0x3c/0xa0 ata_qc_complete+0x26/0x450 ata_do_link_abort+0xa3/0xe0 ata_port_freeze+0x2e/0x40 ata_hsm_qc_complete+0x94/0xa0 ata_sff_hsm_move+0x177/0x7a0 ata_sff_pio_task+0xc7/0x1b0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 -> (&host->lock){-...}-{2:2} ops: 69 { IN-HARDIRQ-W at: lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_bmdma_interrupt+0x27/0x200 __handle_irq_event_percpu+0xd5/0x2b0 handle_irq_event+0x57/0xb0 handle_edge_irq+0x8c/0x230 asm_call_irq_on_stack+0xf/0x20 common_interrupt+0x100/0x1c0 asm_common_interrupt+0x1e/0x40 native_safe_halt+0xe/0x10 arch_cpu_idle+0x15/0x20 default_idle_call+0x59/0x1c0 do_idle+0x22c/0x2c0 cpu_startup_entry+0x20/0x30 start_secondary+0x11d/0x150 secondary_startup_64_no_verify+0xa6/0xab INITIAL USE at: lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_dev_init+0x54/0xe0 ata_link_init+0x8b/0xd0 ata_port_alloc+0x1f1/0x210 ata_host_alloc+0xf1/0x130 ata_host_alloc_pinfo+0x14/0xb0 ata_pci_sff_prepare_host+0x41/0xa0 ata_pci_bmdma_prepare_host+0x14/0x30 piix_init_one+0x21f/0x600 local_pci_probe+0x48/0x80 pci_device_probe+0x105/0x1c0 really_probe+0x221/0x490 driver_probe_device+0xe9/0x160 device_driver_attach+0xb2/0xc0 __driver_attach+0x91/0x150 bus_for_each_dev+0x81/0xc0 driver_attach+0x1e/0x20 bus_add_driver+0x138/0x1f0 driver_register+0x91/0xf0 __pci_register_driver+0x73/0x80 piix_init+0x1e/0x2e do_one_initcall+0x5f/0x2d0 kernel_init_freeable+0x26f/0x2cf kernel_init+0xe/0x113 ret_from_fork+0x1f/0x30 } ... key at: [<ffffffff83d9fdc0>] __key.6+0x0/0x10 ... acquired at: __lock_acquire+0x9da/0x2370 lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_bmdma_interrupt+0x27/0x200 __handle_irq_event_percpu+0xd5/0x2b0 handle_irq_event+0x57/0xb0 handle_edge_irq+0x8c/0x230 asm_call_irq_on_stack+0xf/0x20 common_interrupt+0x100/0x1c0 asm_common_interrupt+0x1e/0x40 native_safe_halt+0xe/0x10 arch_cpu_idle+0x15/0x20 default_idle_call+0x59/0x1c0 do_idle+0x22c/0x2c0 cpu_startup_entry+0x20/0x30 start_secondary+0x11d/0x150 secondary_startup_64_no_verify+0xa6/0xab This lockdep splat is reported after: commit e918188611f0 ("locking: More accurate annotations for read_lock()") To clarify: - read-locks are recursive only in interrupt context (when in_interrupt() returns true) - after acquiring host->lock in CPU1, another cpu (i.e. CPU2) may call write_lock(&trig->leddev_list_lock) that would be blocked by CPU0 that holds trig->leddev_list_lock in read-mode - when CPU1 (ata_ac_complete()) tries to read-lock trig->leddev_list_lock, it would be blocked by the write-lock waiter on CPU2 (because we are not in interrupt context, so the read-lock is not recursive) - at this point if an interrupt happens on CPU0 and ata_bmdma_interrupt() is executed it will try to acquire host->lock, that is held by CPU1, that is currently blocked by CPU2, so: * CPU0 blocked by CPU1 * CPU1 blocked by CPU2 * CPU2 blocked by CPU0 *** DEADLOCK *** The deadlock scenario is better represented by the following schema (thanks to Boqun Feng <boqun.feng@gmail.com> for the schema and the detailed explanation of the deadlock condition): CPU 0: CPU 1: CPU 2: ----- ----- ----- led_trigger_event(): read_lock(&trig->leddev_list_lock); <workqueue> ata_hsm_qc_complete(): spin_lock_irqsave(&host->lock); write_lock(&trig->leddev_list_lock); ata_port_freeze(): ata_do_link_abort(): ata_qc_complete(): ledtrig_disk_activity(): led_trigger_blink_oneshot(): read_lock(&trig->leddev_list_lock); // ^ not in in_interrupt() context, so could get blocked by CPU 2 <interrupt> ata_bmdma_interrupt(): spin_lock_irqsave(&host->lock); Fix by using read_lock_irqsave/irqrestore() in led_trigger_event(), so that no interrupt can happen in between, preventing the deadlock condition. Apply the same change to led_trigger_blink_setup() as well, since the same deadlock scenario can also happen in power_supply_update_bat_leds() -> led_trigger_blink() -> led_trigger_blink_setup() (workqueue context), and potentially prevent other similar usages. Link: https://lore.kernel.org/lkml/20201101092614.GB3989@xps-13-7390/ Fixes: eb25cb9956cc ("leds: convert IDE trigger to common disk trigger") Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-03net: usb: qmi_wwan: added support for Thales Cinterion PLSx3 modem familyGiacinto Cifelli
commit 7e0e63d09516e96994c879f07c5a3c3269d7015e upstream. Bus 003 Device 009: ID 1e2d:006f Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x1e2d idProduct 0x006f bcdDevice 0.00 iManufacturer 3 Cinterion Wireless Modules iProduct 2 PLSx3 iSerial 4 fa3c1419 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 303 bNumInterfaces 9 bConfigurationValue 1 iConfiguration 1 Cinterion Configuration bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 CDC Union: bMasterInterface 0 bSlaveInterface 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 2 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 3 CDC Union: bMasterInterface 2 bSlaveInterface 3 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 4 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 5 CDC Union: bMasterInterface 4 bSlaveInterface 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 6 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 7 CDC Union: bMasterInterface 6 bSlaveInterface 7 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 7 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 8 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8a EP 10 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Cc: stable@vger.kernel.org Signed-off-by: Giacinto Cifelli <gciofono@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20210120045650.10855-1-gciofono@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-03ACPI: sysfs: Prefer "compatible" modaliasKai-Heng Feng
commit 36af2d5c4433fb40ee2af912c4ac0a30991aecfc upstream. Commit 8765c5ba1949 ("ACPI / scan: Rework modalias creation when "compatible" is present") may create two "MODALIAS=" in one uevent file if specific conditions are met. This breaks systemd-udevd, which assumes each "key" in one uevent file to be unique. The internal implementation of systemd-udevd overwrites the first MODALIAS with the second one, so its kmod rule doesn't load the driver for the first MODALIAS. So if both the ACPI modalias and the OF modalias are present, use the latter to ensure that there will be only one MODALIAS. Link: https://github.com/systemd/systemd/pull/18163 Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Fixes: 8765c5ba1949 ("ACPI / scan: Rework modalias creation when "compatible" is present") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: 4.1+ <stable@vger.kernel.org> # 4.1+ [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30net: dsa: b53: fix an off by one in checking "vlan->vid"Dan Carpenter
commit 8e4052c32d6b4b39c1e13c652c7e33748d447409 upstream. The > comparison should be >= to prevent accessing one element beyond the end of the dev->vlans[] array in the caller function, b53_vlan_add(). The "dev->vlans" array is allocated in the b53_switch_init() function and it has "dev->num_vlans" elements. Fixes: a2482d2ce349 ("net: dsa: b53: Plug in VLAN support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/YAbxI97Dl/pmBy5V@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30sh_eth: Fix power down vs. is_opened flag orderingGeert Uytterhoeven
commit f6a2e94b3f9d89cb40771ff746b16b5687650cbb upstream. sh_eth_close() does a synchronous power down of the device before marking it closed. Revert the order, to make sure the device is never marked opened while suspended. While at it, use pm_runtime_put() instead of pm_runtime_put_sync(), as there is no reason to do a synchronous power down. Fixes: 7fa2955ff70ce453 ("sh_eth: Fix sleeping function called from invalid context") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20210118150812.796791-1-geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30xhci: tegra: Delay for disabling LFPS detectorJC Kuo
commit da7e0c3c2909a3d9bf8acfe1db3cb213bd7febfb upstream. Occasionally, we are seeing some SuperSpeed devices resumes right after being directed to U3. This commits add 500us delay to ensure LFPS detector is disabled before sending ACK to firmware. [ 16.099363] tegra-xusb 70090000.usb: entering ELPG [ 16.104343] tegra-xusb 70090000.usb: 2-1 isn't suspended: 0x0c001203 [ 16.114576] tegra-xusb 70090000.usb: not all ports suspended: -16 [ 16.120789] tegra-xusb 70090000.usb: entering ELPG failed The register write passes through a few flop stages of 32KHz clock domain. NVIDIA ASIC designer reviewed RTL and suggests 500us delay. Cc: stable@vger.kernel.org Signed-off-by: JC Kuo <jckuo@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210115161907.2875631-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30xhci: make sure TRB is fully written before giving it to the controllerMathias Nyman
commit 576667bad341516edc4e18eb85acb0a2b4c9c9d9 upstream. Once the command ring doorbell is rung the xHC controller will parse all command TRBs on the command ring that have the cycle bit set properly. If the driver just started writing the next command TRB to the ring when hardware finished the previous TRB, then HW might fetch an incomplete TRB as long as its cycle bit set correctly. A command TRB is 16 bytes (128 bits) long. Driver writes the command TRB in four 32 bit chunks, with the chunk containing the cycle bit last. This does however not guarantee that chunks actually get written in that order. This was detected in stress testing when canceling URBs with several connected USB devices. Two consecutive "Set TR Dequeue pointer" commands got queued right after each other, and the second one was only partially written when the controller parsed it, causing the dequeue pointer to be set to bogus values. This was seen as error messages: "Mismatch between completed Set TR Deq Ptr command & xHCI internal state" Solution is to add a write memory barrier before writing the cycle bit. Cc: <stable@vger.kernel.org> Tested-by: Ross Zwisler <zwisler@google.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210115161907.2875631-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30usb: bdc: Make bdc pci driver depend on BROKENPatrik Jakobsson
commit ef02684c4e67d8c35ac83083564135bc7b1d3445 upstream. The bdc pci driver is going to be removed due to it not existing in the wild. This patch turns off compilation of the driver so that stable kernels can also pick up the change. This helps the out-of-tree facetimehd webcam driver as the pci id conflicts with bdc. Cc: Al Cooper <alcooperx@gmail.com> Cc: <stable@vger.kernel.org> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://lore.kernel.org/r/20210118203615.13995-1-patrik.r.jakobsson@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30usb: udc: core: Use lock when write to soft_connectThinh Nguyen
commit c28095bc99073ddda65e4f31f6ae0d908d4d5cd8 upstream. Use lock to guard against concurrent access for soft-connect/disconnect operations when writing to soft_connect sysfs. Fixes: 2ccea03a8f7e ("usb: gadget: introduce UDC Class") Cc: stable@vger.kernel.org Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/338ea01fbd69b1985ef58f0f59af02c805ddf189.1610611437.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30USB: ehci: fix an interrupt calltrace errorLongfang Liu
commit 643a4df7fe3f6831d14536fd692be85f92670a52 upstream. The system that use Synopsys USB host controllers goes to suspend when using USB audio player. This causes the USB host controller continuous send interrupt signal to system, When the number of interrupts exceeds 100000, the system will forcibly close the interrupts and output a calltrace error. When the system goes to suspend, the last interrupt is reported to the driver. At this time, the system has set the state to suspend. This causes the last interrupt to not be processed by the system and not clear the interrupt flag. This uncleared interrupt flag constantly triggers new interrupt event. This causing the driver to receive more than 100,000 interrupts, which causes the system to forcibly close the interrupt report and report the calltrace error. so, when the driver goes to sleep and changes the system state to suspend, the interrupt flag needs to be cleared. Signed-off-by: Longfang Liu <liulongfang@huawei.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/1610416647-45774-1-git-send-email-liulongfang@huawei.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30ehci: fix EHCI host controller initialization sequenceEugene Korenevsky
commit 280a9045bb18833db921b316a5527d2b565e9f2e upstream. According to EHCI spec, EHCI HC clears USBSTS.HCHalted whenever USBCMD.RS=1. However, it is a good practice to wait some time after setting USBCMD.RS (approximately 100ms) until USBSTS.HCHalted become zero. Without this waiting, VirtualBox's EHCI virtual HC accidentally hangs (see BugLink). BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211095 Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Eugene Korenevsky <ekorenevsky@astralinux.ru> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210110173609.GA17313@himera.home Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30stm class: Fix module init return on allocation failureWang Hui
commit 927633a6d20af319d986f3e42c3ef9f6d7835008 upstream. In stm_heartbeat_init(): return value gets reset after the first iteration by stm_source_register_device(), so allocation failures after that will, after a clean up, return success. Fix that. Fixes: 119291853038 ("stm class: Add heartbeat stm source device") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hui <john.wanghui@huawei.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20210115195917.3184-2-alexander.shishkin@linux.intel.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30iio: ad5504: Fix setting power-down stateLars-Peter Clausen
commit efd597b2839a9895e8a98fcb0b76d2f545802cd4 upstream. The power-down mask of the ad5504 is actually a power-up mask. Meaning if a bit is set the corresponding channel is powered up and if it is not set the channel is powered down. The driver currently has this the wrong way around, resulting in the channel being powered up when requested to be powered down and vice versa. Fixes: 3bbbf150ffde ("staging:iio:dac:ad5504: Use strtobool for boolean values") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201209104649.5794-1-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30can: dev: can_restart: fix use after free bugVincent Mailhol
[ Upstream commit 03f16c5075b22c8902d2af739969e878b0879c94 ] After calling netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the netif_rx_ni() in: stats->rx_bytes += cf->len; Reordering the lines solves the issue. Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface") Link: https://lore.kernel.org/r/20210120114137.200019-2-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-30i2c: octeon: check correct size of maximum RECV_LEN packetWolfram Sang
[ Upstream commit 1b2cfa2d1dbdcc3b6dba1ecb7026a537a1d7277f ] I2C_SMBUS_BLOCK_MAX defines already the maximum number as defined in the SMBus 2.0 specs. No reason to add one to it. Fixes: 886f6f8337dd ("i2c: octeon: Support I2C_M_RECV_LEN") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Robert Richter <rric@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-30drm/nouveau/i2c/gm200: increase width of aux semaphore owner fieldsBen Skeggs
[ Upstream commit ba6e9ab0fcf3d76e3952deb12b5f993991621d9c ] Noticed while debugging GA102. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-30drm/nouveau/bios: fix issue shadowing expansion ROMsBen Skeggs
[ Upstream commit 402a89660e9dc880710b12773076a336c9dab3d7 ] This issue has generally been covered up by the presence of additional expansion ROMs after the ones we're interested in, with header fetches of subsequent images loading enough of the ROM to hide the issue. Noticed on GA102, which lacks a type 0x70 image compared to TU102,. [ 906.364197] nouveau 0000:09:00.0: bios: 00000000: type 00, 65024 bytes [ 906.381205] nouveau 0000:09:00.0: bios: 0000fe00: type 03, 91648 bytes [ 906.405213] nouveau 0000:09:00.0: bios: 00026400: type e0, 22016 bytes [ 906.410984] nouveau 0000:09:00.0: bios: 0002ba00: type e0, 366080 bytes vs [ 22.961901] nouveau 0000:09:00.0: bios: 00000000: type 00, 60416 bytes [ 22.984174] nouveau 0000:09:00.0: bios: 0000ec00: type 03, 71168 bytes [ 23.010446] nouveau 0000:09:00.0: bios: 00020200: type e0, 48128 bytes [ 23.028220] nouveau 0000:09:00.0: bios: 0002be00: type e0, 140800 bytes [ 23.080196] nouveau 0000:09:00.0: bios: 0004e400: type 70, 7168 bytes Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-30scsi: ufs: Correct the LUN used in eh_device_reset_handler() callbackCan Guo
[ Upstream commit 35fc4cd34426c242ab015ef280853b7bff101f48 ] Users can initiate resets to specific SCSI device/target/host through IOCTL. When this happens, the SCSI cmd passed to eh_device/target/host _reset_handler() callbacks is initialized with a request whose tag is -1. In this case it is not right for eh_device_reset_handler() callback to count on the LUN get from hba->lrb[-1]. Fix it by getting LUN from the SCSI device associated with the SCSI cmd. Link: https://lore.kernel.org/r/1609157080-26283-1-git-send-email-cang@codeaurora.org Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-30dm: avoid filesystem lookup in dm_get_dev_t()Hannes Reinecke
commit 809b1e4945774c9ec5619a8f4e2189b7b3833c0c upstream. This reverts commit 644bda6f3460 ("dm table: fall back to getting device using name_to_dev_t()") dm_get_dev_t() is just used to convert an arbitrary 'path' string into a dev_t. It doesn't presume that the device is present; that check will be done later, as the only caller is dm_get_device(), which does a dm_get_table_device() later on, which will properly open the device. So if the path string already _is_ in major:minor representation we can convert it directly, avoiding a recursion into the filesystem to lookup the block device. This avoids a hang in multipath_message() when the filesystem is inaccessible. Fixes: 644bda6f3460 ("dm table: fall back to getting device using name_to_dev_t()") Cc: stable@vger.kernel.org Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin Wilck <mwilck@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30ACPI: scan: Make acpi_bus_get_device() clear return pointer on errorHans de Goede
commit 78a18fec5258c8df9435399a1ea022d73d3eceb9 upstream. Set the acpi_device pointer which acpi_bus_get_device() returns-by- reference to NULL on errors. We've recently had 2 cases where callers of acpi_bus_get_device() did not properly error check the return value, so set the returned- by-reference acpi_device pointer to NULL, because at least some callers of acpi_bus_get_device() expect that to be done on errors. [ rjw: This issue was exposed by commit 71da201f38df ("ACPI: scan: Defer enumeration of devices with _DEP lists") which caused it to be much more likely to occur on some systems, but the real defect had been introduced by an earlier commit. ] Fixes: 40e7fcb19293 ("ACPI: Add _DEP support to fix battery issue on Asus T100TA") Fixes: bcfcd409d4db ("usb: split code locating ACPI companion into port and device") Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Diagnosed-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: All applicable <stable@vger.kernel.org> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-23spi: cadence: cache reference clock rate during probeMichael Hennerich
commit 4d163ad79b155c71bf30366dc38f8d2502f78844 upstream. The issue is that using SPI from a callback under the CCF lock will deadlock, since this code uses clk_get_rate(). Fixes: c474b38665463 ("spi: Add driver for Cadence SPI controller") Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20210114154217.51996-1-alexandru.ardelean@analog.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-23rndis_host: set proper input size for OID_GEN_PHYSICAL_MEDIUM requestAndrey Zhizhikin
[ Upstream commit e56b3d94d939f52d46209b9e1b6700c5bfff3123 ] MSFT ActiveSync implementation requires that the size of the response for incoming query is to be provided in the request input length. Failure to set the input size proper results in failed request transfer, where the ActiveSync counterpart reports the NDIS_STATUS_INVALID_LENGTH (0xC0010014L) error. Set the input size for OID_GEN_PHYSICAL_MEDIUM query to the expected size of the response in order for the ActiveSync to properly respond to the request. Fixes: 039ee17d1baa ("rndis_host: Add RNDIS physical medium checking into generic_rndis_bind()") Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Link: https://lore.kernel.org/r/20210108095839.3335-1-andrey.zhizhikin@leica-geosystems.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-23netxen_nic: fix MSI/MSI-x interruptsManish Chopra
[ Upstream commit a2bc221b972db91e4be1970e776e98f16aa87904 ] For all PCI functions on the netxen_nic adapter, interrupt mode (INTx or MSI) configuration is dependent on what has been configured by the PCI function zero in the shared interrupt register, as these adapters do not support mixed mode interrupts among the functions of a given adapter. Logic for setting MSI/MSI-x interrupt mode in the shared interrupt register based on PCI function id zero check is not appropriate for all family of netxen adapters, as for some of the netxen family adapters PCI function zero is not really meant to be probed/loaded in the host but rather just act as a management function on the device, which caused all the other PCI functions on the adapter to always use legacy interrupt (INTx) mode instead of choosing MSI/MSI-x interrupt mode. This patch replaces that check with port number so that for all type of adapters driver attempts for MSI/MSI-x interrupt modes. Fixes: b37eb210c076 ("netxen_nic: Avoid mixed mode interrupts") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Link: https://lore.kernel.org/r/20210107101520.6735-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-23net: cdc_ncm: correct overhead in delayed_ndp_sizeJouni K. Seppänen
commit 7a68d725e4ea384977445e0bcaed3d7de83ab5b3 upstream. Aligning to tx_ndp_modulus is not sufficient because the next align call can be cdc_ncm_align_tail, which can add up to ctx->tx_modulus + ctx->tx_remainder - 1 bytes. This used to lead to occasional crashes on a Huawei 909s-120 LTE module as follows: - the condition marked /* if there is a remaining skb [...] */ is true so the swaps happen - skb_out is set from ctx->tx_curr_skb - skb_out->len is exactly 0x3f52 - ctx->tx_curr_size is 0x4000 and delayed_ndp_size is 0xac (note that the sum of skb_out->len and delayed_ndp_size is 0x3ffe) - the for loop over n is executed once - the cdc_ncm_align_tail call marked /* align beginning of next frame */ increases skb_out->len to 0x3f56 (the sum is now 0x4002) - the condition marked /* check if we had enough room left [...] */ is false so we break out of the loop - the condition marked /* If requested, put NDP at end of frame. */ is true so the NDP is written into skb_out - now skb_out->len is 0x4002, so padding_count is minus two interpreted as an unsigned number, which is used as the length argument to memset, leading to a crash with various symptoms but usually including > Call Trace: > <IRQ> > cdc_ncm_fill_tx_frame+0x83a/0x970 [cdc_ncm] > cdc_mbim_tx_fixup+0x1d9/0x240 [cdc_mbim] > usbnet_start_xmit+0x5d/0x720 [usbnet] The cdc_ncm_align_tail call first aligns on a ctx->tx_modulus boundary (adding at most ctx->tx_modulus-1 bytes), then adds ctx->tx_remainder bytes. Alternatively, the next alignment call can occur in cdc_ncm_ndp16 or cdc_ncm_ndp32, in which case at most ctx->tx_ndp_modulus-1 bytes are added. A similar problem has occurred before, and the code is nontrivial to reason about, so add a guard before the crashing call. By that time it is too late to prevent any memory corruption (we'll have written past the end of the buffer already) but we can at least try to get a warning written into an on-disk log by avoiding the hard crash caused by padding past the buffer with a huge number of zeros. Signed-off-by: Jouni K. Seppänen <jks@iki.fi> Fixes: 4a0e3e989d66 ("cdc_ncm: Add support for moving NDP to end of NCM frame") Link: https://bugzilla.kernel.org/show_bug.cgi?id=209407 Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> [jks@iki.fi: backport to 4.4.y, 4.9.y] Signed-off-by: Jouni K. Seppänen <jks@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-23usb: ohci: Make distrust_firmware param default to falseHamish Martin
commit c4005a8f65edc55fb1700dfc5c1c3dc58be80209 upstream. The 'distrust_firmware' module parameter dates from 2004 and the USB subsystem is a lot more mature and reliable now than it was then. Alter the default to false now. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20200910212512.16670-2-hamish.martin@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-23RDMA/usnic: Fix memleak in find_free_vf_and_create_qp_grpDinghao Liu
commit a306aba9c8d869b1fdfc8ad9237f1ed718ea55e6 upstream. If usnic_ib_qp_grp_create() fails at the first call, dev_list will not be freed on error, which leads to memleak. Fixes: e3cf00d0a87f ("IB/usnic: Add Cisco VIC low-level hardware driver") Link: https://lore.kernel.org/r/20201226074248.2893-1-dinghao.liu@zju.edu.cn Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 12:11:44 +0000