summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-12-22xen/netback: don't queue unlimited number of packagesJuergen Gross
commit be81992f9086b230623ae3ebbc85ecee4d00a3d3 upstream. In case a guest isn't consuming incoming network traffic as fast as it is coming in, xen-netback is buffering network packages in unlimited numbers today. This can result in host OOM situations. Commit f48da8b14d04ca8 ("xen-netback: fix unlimited guest Rx internal queue and carrier flapping") meant to introduce a mechanism to limit the amount of buffered data by stopping the Tx queue when reaching the data limit, but this doesn't work for cases like UDP. When hitting the limit don't queue further SKBs, but drop them instead. In order to be able to tell Rx packages have been dropped increment the rx_dropped statistics counter in this case. It should be noted that the old solution to continue queueing SKBs had the additional problem of an overflow of the 32-bit rx_queue_len value would result in intermittent Tx queue enabling. This is part of XSA-392 Fixes: f48da8b14d04ca8 ("xen-netback: fix unlimited guest Rx internal queue and carrier flapping") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22xen/netback: fix rx queue stall detectionJuergen Gross
commit 6032046ec4b70176d247a71836186d47b25d1684 upstream. Commit 1d5d48523900a4b ("xen-netback: require fewer guest Rx slots when not using GSO") introduced a security problem in netback, as an interface would only be regarded to be stalled if no slot is available in the rx queue ring page. In case the SKB at the head of the queued requests will need more than one rx slot and only one slot is free the stall detection logic will never trigger, as the test for that is only looking for at least one slot to be free. Fix that by testing for the needed number of slots instead of only one slot being available. In order to not have to take the rx queue lock that often, store the number of needed slots in the queue data. As all SKB dequeue operations happen in the rx queue kernel thread this is safe, as long as the number of needed slots is accessed via READ/WRITE_ONCE() only and updates are always done with the rx queue lock held. Add a small helper for obtaining the number of free slots. This is part of XSA-392 Fixes: 1d5d48523900a4b ("xen-netback: require fewer guest Rx slots when not using GSO") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22xen/console: harden hvc_xen against event channel stormsJuergen Gross
commit fe415186b43df0db1f17fa3a46275fd92107fe71 upstream. The Xen console driver is still vulnerable for an attack via excessive number of events sent by the backend. Fix that by using a lateeoi event channel. For the normal domU initial console this requires the introduction of bind_evtchn_to_irq_lateeoi() as there is no xenbus device available at the time the event channel is bound to the irq. As the decision whether an interrupt was spurious or not requires to test for bytes having been read from the backend, move sending the event into the if statement, as sending an event without having found any bytes to be read is making no sense at all. This is part of XSA-391 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22xen/netfront: harden netfront against event channel stormsJuergen Gross
commit b27d47950e481f292c0a5ad57357edb9d95d03ba upstream. The Xen netfront driver is still vulnerable for an attack via excessive number of events sent by the backend. Fix that by using lateeoi event channels. For being able to detect the case of no rx responses being added while the carrier is down a new lock is needed in order to update and test rsp_cons and the number of seen unconsumed responses atomically. This is part of XSA-391 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22xen/blkfront: harden blkfront against event channel stormsJuergen Gross
commit 0fd08a34e8e3b67ec9bd8287ac0facf8374b844a upstream. The Xen blkfront driver is still vulnerable for an attack via excessive number of events sent by the backend. Fix that by using lateeoi event channels. This is part of XSA-391 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22scsi: scsi_debug: Sanity check block descriptor length in resp_mode_select()George Kennedy
commit e0a2c28da11e2c2b963fc01d50acbf03045ac732 upstream. In resp_mode_select() sanity check the block descriptor len to avoid UAF. BUG: KASAN: use-after-free in resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509 Read of size 1 at addr ffff888026670f50 by task scsicmd/15032 CPU: 1 PID: 15032 Comm: scsicmd Not tainted 5.15.0-01d0625 #15 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Call Trace: <TASK> dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:107 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:257 kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:443 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report_generic.c:306 resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509 schedule_resp+0x4af/0x1a10 drivers/scsi/scsi_debug.c:5483 scsi_debug_queuecommand+0x8c9/0x1e70 drivers/scsi/scsi_debug.c:7537 scsi_queue_rq+0x16b4/0x2d10 drivers/scsi/scsi_lib.c:1521 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1640 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1762 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1839 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:63 sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:837 sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:775 sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:941 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1166 __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:52 do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:50 entry_SYSCALL_64_after_hwframe+0x44/0xae arch/x86/entry/entry_64.S:113 Link: https://lore.kernel.org/r/1637262208-28850-1-git-send-email-george.kennedy@oracle.com Reported-by: syzkaller <syzkaller@googlegroups.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: George Kennedy <george.kennedy@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22media: mxl111sf: change mutex_init() locationPavel Skripkin
commit 44870a9e7a3c24acbb3f888b2a7cc22c9bdf7e7f upstream. Syzbot reported, that mxl111sf_ctrl_msg() uses uninitialized mutex. The problem was in wrong mutex_init() location. Previous mutex_init(&state->msg_lock) call was in ->init() function, but dvb_usbv2_init() has this order of calls: dvb_usbv2_init() dvb_usbv2_adapter_init() dvb_usbv2_adapter_frontend_init() props->frontend_attach() props->init() Since mxl111sf_* devices call mxl111sf_ctrl_msg() in ->frontend_attach() internally we need to initialize state->msg_lock before frontend_attach(). To achieve it, ->probe() call added to all mxl111sf_* devices, which will simply initiaize mutex. Reported-and-tested-by: syzbot+5ca0bf339f13c4243001@syzkaller.appspotmail.com Fixes: 8572211842af ("[media] mxl111sf: convert to new DVB USB") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22Input: touchscreen - avoid bitwise vs logical OR warningNathan Chancellor
commit a02dcde595f7cbd240ccd64de96034ad91cffc40 upstream. A new warning in clang points out a few places in this driver where a bitwise OR is being used with boolean types: drivers/input/touchscreen.c:81:17: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This use of a bitwise OR is intentional, as bitwise operations do not short circuit, which allows all the calls to touchscreen_get_prop_u32() to happen so that the last parameter is initialized while coalescing the results of the calls to make a decision after they are all evaluated. To make this clearer to the compiler, use the '|=' operator to assign the result of each touchscreen_get_prop_u32() call to data_present, which keeps the meaning of the code the same but makes it obvious that every one of these calls is expected to happen. Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reported-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20211014205757.3474635-1-nathan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22mwifiex: Remove unnecessary braces from HostCmd_SET_SEQ_NO_BSS_INFONathan Chancellor
commit 6a953dc4dbd1c7057fb765a24f37a5e953c85fb0 upstream. A new warning in clang points out when macro expansion might result in a GNU C statement expression. There is an instance of this in the mwifiex driver: drivers/net/wireless/marvell/mwifiex/cmdevt.c:217:34: warning: '}' and ')' tokens terminating statement expression appear in different macro expansion contexts [-Wcompound-token-split-by-macro] host_cmd->seq_num = cpu_to_le16(HostCmd_SET_SEQ_NO_BSS_INFO ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/marvell/mwifiex/fw.h:519:46: note: expanded from macro 'HostCmd_SET_SEQ_NO_BSS_INFO' (((type) & 0x000f) << 12); } ^ This does not appear to be a real issue. Removing the braces and replacing them with parentheses will fix the warning and not change the meaning of the code. Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Link: https://github.com/ClangBuiltLinux/linux/issues/1146 Reported-by: Andy Lavr <andy.lavr@gmail.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200901070834.1015754-1-natechancellor@gmail.com Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22drm/amdgpu: correct register access for RLC_JUMP_TABLE_RESTORELe Ma
commit f3a8076eb28cae1553958c629aecec479394bbe2 upstream. should count on GC IP base address Signed-off-by: Le Ma <le.ma@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22libata: if T_LENGTH is zero, dma direction should be DMA_NONEGeorge Kennedy
commit 5da5231bb47864e5dd6c6731151e98b6ee498827 upstream. Avoid data corruption by rejecting pass-through commands where T_LENGTH is zero (No data is transferred) and the dma direction is not DMA_NONE. Cc: <stable@vger.kernel.org> Reported-by: syzkaller<syzkaller@googlegroups.com> Signed-off-by: George Kennedy<george.kennedy@oracle.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22USB: serial: option: add Telit FN990 compositionsDaniele Palmas
commit 2b503c8598d1b232e7fc7526bce9326d92331541 upstream. Add the following Telit FN990 compositions: 0x1070: tty, adb, rmnet, tty, tty, tty, tty 0x1071: tty, adb, mbim, tty, tty, tty, tty 0x1072: rndis, tty, adb, tty, tty, tty, tty 0x1073: tty, adb, ecm, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20211210100714.22587-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22USB: serial: cp210x: fix CP2105 GPIO registrationJohan Hovold
commit 83b67041f3eaf33f98a075249aa7f4c7617c2f85 upstream. When generalising GPIO support and adding support for CP2102N, the GPIO registration for some CP2105 devices accidentally broke. Specifically, when all the pins of a port are in "modem" mode, and thus unavailable for GPIO use, the GPIO chip would now be registered without having initialised the number of GPIO lines. This would in turn be rejected by gpiolib and some errors messages would be printed (but importantly probe would still succeed). Fix this by initialising the number of GPIO lines before registering the GPIO chip. Note that as for the other device types, and as when all CP2105 pins are muxed for LED function, the GPIO chip is registered also when no pins are available for GPIO use. Reported-by: Maarten Brock <m.brock@vanmierlo.com> Link: https://lore.kernel.org/r/5eb560c81d2ea1a2b4602a92d9f48a89@vanmierlo.com Fixes: c8acfe0aadbe ("USB: serial: cp210x: implement GPIO support for CP2102N") Cc: stable@vger.kernel.org # 4.19 Cc: Karoly Pados <pados@pados.hu> Link: https://lore.kernel.org/r/20211126094348.31698-1-johan@kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Maarten Brock <m.brock@vanmierlo.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22usb: xhci: Extend support for runtime power management for AMD's Yellow carp.Nehal Bakulchandra Shah
commit f886d4fbb7c97b8f5f447c92d2dab99c841803c0 upstream. AMD's Yellow Carp platform has few more XHCI controllers, enable the runtime power management support for the same. Signed-off-by: Nehal Bakulchandra Shah <Nehal-Bakulchandra.shah@amd.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211215093216.1839065-1-Nehal-Bakulchandra.shah@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22PCI/MSI: Mask MSI-X vectors only on successStefan Roese
commit 83dbf898a2d45289be875deb580e93050ba67529 upstream. Masking all unused MSI-X entries is done to ensure that a crash kernel starts from a clean slate, which correponds to the reset state of the device as defined in the PCI-E specificion 3.0 and later: Vector Control for MSI-X Table Entries -------------------------------------- "00: Mask bit: When this bit is set, the function is prohibited from sending a message using this MSI-X Table entry. ... This bit’s state after reset is 1 (entry is masked)." A Marvell NVME device fails to deliver MSI interrupts after trying to enable MSI-X interrupts due to that masking. It seems to take the MSI-X mask bits into account even when MSI-X is disabled. While not specification compliant, this can be cured by moving the masking into the success path, so that the MSI-X table entries stay in device reset state when the MSI-X setup fails. [ tglx: Move it into the success path, add comment and amend changelog ] Fixes: aa8092c1d1f1 ("PCI/MSI: Mask all unused MSI-X entries") Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-pci@vger.kernel.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Marek Vasut <marex@denx.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211210161025.3287927-1-sr@denx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22PCI/MSI: Clear PCI_MSIX_FLAGS_MASKALL on errorThomas Gleixner
commit 94185adbfad56815c2c8401e16d81bdb74a79201 upstream. PCI_MSIX_FLAGS_MASKALL is set in the MSI-X control register at MSI-X interrupt setup time. It's cleared on success, but the error handling path only clears the PCI_MSIX_FLAGS_ENABLE bit. That's incorrect as the reset state of the PCI_MSIX_FLAGS_MASKALL bit is zero. That can be observed via lspci: Capabilities: [b0] MSI-X: Enable- Count=67 Masked+ Clear the bit in the error path to restore the reset state. Fixes: 438553958ba1 ("PCI/MSI: Enable and mask MSI-X early") Reported-by: Stefan Roese <sr@denx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Stefan Roese <sr@denx.de> Cc: linux-pci@vger.kernel.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Marek Vasut <marex@denx.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87tufevoqx.ffs@tglx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22USB: NO_LPM quirk Lenovo USB-C to Ethernet Adapher(RTL8153-04)Jimmy Wang
commit 0ad3bd562bb91853b9f42bda145b5db6255aee90 upstream. This device doesn't work well with LPM, losing connectivity intermittently. Disable LPM to resolve the issue. Reviewed-by: <markpearson@lenovo.com> Signed-off-by: Jimmy Wang <wangjm221@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211214012652.4898-1-wangjm221@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22USB: gadget: bRequestType is a bitfield, not a enumGreg Kroah-Hartman
[ Upstream commit f08adf5add9a071160c68bb2a61d697f39ab0758 ] Szymon rightly pointed out that the previous check for the endpoint direction in bRequestType was not looking at only the bit involved, but rather the whole value. Normally this is ok, but for some request types, bits other than bit 8 could be set and the check for the endpoint length could not stall correctly. Fix that up by only checking the single bit. Fixes: 153a2d7e3350 ("USB: gadget: detect too-big endpoint 0 requests") Cc: Felipe Balbi <balbi@kernel.org> Reported-by: Szymon Heidrich <szymon.heidrich@gmail.com> Link: https://lore.kernel.org/r/20211214184621.385828-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22net: systemport: Add global locking for descriptor lifecycleFlorian Fainelli
[ Upstream commit 8b8e6e782456f1ce02a7ae914bbd5b1053f0b034 ] The descriptor list is a shared resource across all of the transmit queues, and the locking mechanism used today only protects concurrency across a given transmit queue between the transmit and reclaiming. This creates an opportunity for the SYSTEMPORT hardware to work on corrupted descriptors if we have multiple producers at once which is the case when using multiple transmit queues. This was particularly noticeable when using multiple flows/transmit queues and it showed up in interesting ways in that UDP packets would get a correct UDP header checksum being calculated over an incorrect packet length. Similarly TCP packets would get an equally correct checksum computed by the hardware over an incorrect packet length. The SYSTEMPORT hardware maintains an internal descriptor list that it re-arranges when the driver produces a new descriptor anytime it writes to the WRITE_PORT_{HI,LO} registers, there is however some delay in the hardware to re-organize its descriptors and it is possible that concurrent TX queues eventually break this internal allocation scheme to the point where the length/status part of the descriptor gets used for an incorrect data buffer. The fix is to impose a global serialization for all TX queues in the short section where we are writing to the WRITE_PORT_{HI,LO} registers which solves the corruption even with multiple concurrent TX queues being used. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211215202450.4086240-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22netdevsim: Zero-initialize memory for new map's value in function ↵Haimin Zhang
nsim_bpf_map_alloc [ Upstream commit 481221775d53d6215a6e5e9ce1cce6d2b4ab9a46 ] Zero-initialize memory for new map's value in function nsim_bpf_map_alloc since it may cause a potential kernel information leak issue, as follows: 1. nsim_bpf_map_alloc calls nsim_map_alloc_elem to allocate elements for a new map. 2. nsim_map_alloc_elem uses kmalloc to allocate map's value, but doesn't zero it. 3. A user application can use IOCTL BPF_MAP_LOOKUP_ELEM to get specific element's information in the map. 4. The kernel function map_lookup_elem will call bpf_map_copy_value to get the information allocated at step-2, then use copy_to_user to copy to the user buffer. This can only leak information for an array map. Fixes: 395cacb5f1a0 ("netdevsim: bpf: support fake map offload") Suggested-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Haimin Zhang <tcs.kernel@gmail.com> Link: https://lore.kernel.org/r/20211215111530.72103-1-tcs.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22ixgbe: set X550 MDIO speed before talking to PHYCyril Novikov
[ Upstream commit bf0a375055bd1afbbf02a0ef45f7655da7b71317 ] The MDIO bus speed must be initialized before talking to the PHY the first time in order to avoid talking to it using a speed that the PHY doesn't support. This fixes HW initialization error -17 (IXGBE_ERR_PHY_ADDR_INVALID) on Denverton CPUs (a.k.a. the Atom C3000 family) on ports with a 10Gb network plugged in. On those devices, HLREG0[MDCSPD] resets to 1, which combined with the 10Gb network results in a 24MHz MDIO speed, which is apparently too fast for the connected PHY. PHY register reads over MDIO bus return garbage, leading to initialization failure. Reproduced with Linux kernel 4.19 and 5.15-rc7. Can be reproduced using the following setup: * Use an Atom C3000 family system with at least one X552 LAN on the SoC * Disable PXE or other BIOS network initialization if possible (the interface must not be initialized before Linux boots) * Connect a live 10Gb Ethernet cable to an X550 port * Power cycle (not reset, doesn't always work) the system and boot Linux * Observe: ixgbe interfaces w/ 10GbE cables plugged in fail with error -17 Fixes: e84db7272798 ("ixgbe: Introduce function to control MDIO speed") Signed-off-by: Cyril Novikov <cnovikov@lynx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22igbvf: fix double free in `igbvf_probe`Letu Ren
[ Upstream commit b6d335a60dc624c0d279333b22c737faa765b028 ] In `igbvf_probe`, if register_netdev() fails, the program will go to label err_hw_init, and then to label err_ioremap. In free_netdev() which is just below label err_ioremap, there is `list_for_each_entry_safe` and `netif_napi_del` which aims to delete all entries in `dev->napi_list`. The program has added an entry `adapter->rx_ring->napi` which is added by `netif_napi_add` in igbvf_alloc_queues(). However, adapter->rx_ring has been freed below label err_hw_init. So this a UAF. In terms of how to patch the problem, we can refer to igbvf_remove() and delete the entry before `adapter->rx_ring`. The KASAN logs are as follows: [ 35.126075] BUG: KASAN: use-after-free in free_netdev+0x1fd/0x450 [ 35.127170] Read of size 8 at addr ffff88810126d990 by task modprobe/366 [ 35.128360] [ 35.128643] CPU: 1 PID: 366 Comm: modprobe Not tainted 5.15.0-rc2+ #14 [ 35.129789] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 35.131749] Call Trace: [ 35.132199] dump_stack_lvl+0x59/0x7b [ 35.132865] print_address_description+0x7c/0x3b0 [ 35.133707] ? free_netdev+0x1fd/0x450 [ 35.134378] __kasan_report+0x160/0x1c0 [ 35.135063] ? free_netdev+0x1fd/0x450 [ 35.135738] kasan_report+0x4b/0x70 [ 35.136367] free_netdev+0x1fd/0x450 [ 35.137006] igbvf_probe+0x121d/0x1a10 [igbvf] [ 35.137808] ? igbvf_vlan_rx_add_vid+0x100/0x100 [igbvf] [ 35.138751] local_pci_probe+0x13c/0x1f0 [ 35.139461] pci_device_probe+0x37e/0x6c0 [ 35.165526] [ 35.165806] Allocated by task 366: [ 35.166414] ____kasan_kmalloc+0xc4/0xf0 [ 35.167117] foo_kmem_cache_alloc_trace+0x3c/0x50 [igbvf] [ 35.168078] igbvf_probe+0x9c5/0x1a10 [igbvf] [ 35.168866] local_pci_probe+0x13c/0x1f0 [ 35.169565] pci_device_probe+0x37e/0x6c0 [ 35.179713] [ 35.179993] Freed by task 366: [ 35.180539] kasan_set_track+0x4c/0x80 [ 35.181211] kasan_set_free_info+0x1f/0x40 [ 35.181942] ____kasan_slab_free+0x103/0x140 [ 35.182703] kfree+0xe3/0x250 [ 35.183239] igbvf_probe+0x1173/0x1a10 [igbvf] [ 35.184040] local_pci_probe+0x13c/0x1f0 Fixes: d4e0fe01a38a0 (igbvf: add new driver to support 82576 virtual functions) Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Letu Ren <fantasquex@gmail.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22igb: Fix removal of unicast MAC filters of VFsKaren Sornek
[ Upstream commit 584af82154f56e6b2740160fcc84a2966d969e15 ] Move checking condition of VF MAC filter before clearing or adding MAC filter to VF to prevent potential blackout caused by removal of necessary and working VF's MAC filter. Fixes: 1b8b062a99dc ("igb: add VF trust infrastructure") Signed-off-by: Karen Sornek <karen.sornek@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22soc/tegra: fuse: Fix bitwise vs. logical OR warningNathan Chancellor
[ Upstream commit a7083763619f7485ccdade160deb81737cf2732f ] A new warning in clang points out two instances where boolean expressions are being used with a bitwise OR instead of logical OR: drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] reg = tegra_fuse_read_spare(i) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ || drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: note: cast one or both operands to int to silence this warning drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] reg = tegra_fuse_read_spare(i) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ || drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: note: cast one or both operands to int to silence this warning 2 warnings generated. The motivation for the warning is that logical operations short circuit while bitwise operations do not. In this instance, tegra_fuse_read_spare() is not semantically returning a boolean, it is returning a bit value. Use u32 for its return type so that it can be used with either bitwise or boolean operators without any warnings. Fixes: 25cd5a391478 ("ARM: tegra: Add speedo-based process identification") Link: https://github.com/ClangBuiltLinux/linux/issues/1488 Suggested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22dmaengine: st_fdma: fix MODULE_ALIASAlyssa Ross
[ Upstream commit 822c9f2b833c53fc67e8adf6f63ecc3ea24d502c ] modprobe can't handle spaces in aliases. Fixes: 6b4cd727eaf1 ("dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support") Signed-off-by: Alyssa Ross <hi@alyssa.is> Link: https://lore.kernel.org/r/20211125154441.2626214-1-hi@alyssa.is Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22clk: Don't parent clks until the parent is fully registeredMike Tipton
[ Upstream commit 54baf56eaa40aa5cdcd02b3c20d593e4e1211220 ] Before commit fc0c209c147f ("clk: Allow parents to be specified without string names") child clks couldn't find their parent until the parent clk was added to a list in __clk_core_init(). After that commit, child clks can reference their parent clks directly via a clk_hw pointer, or they can lookup that clk_hw pointer via DT if the parent clk is registered with an OF clk provider. The common clk framework treats hw->core being non-NULL as "the clk is registered" per the logic within clk_core_fill_parent_index(): parent = entry->hw->core; /* * We have a direct reference but it isn't registered yet? * Orphan it and let clk_reparent() update the orphan status * when the parent is registered. */ if (!parent) Therefore we need to be extra careful to not set hw->core until the clk is fully registered with the clk framework. Otherwise we can get into a situation where a child finds a parent clk and we move the child clk off the orphan list when the parent isn't actually registered, wrecking our enable accounting and breaking critical clks. Consider the following scenario: CPU0 CPU1 ---- ---- struct clk_hw clkBad; struct clk_hw clkA; clkA.init.parent_hws = { &clkBad }; clk_hw_register(&clkA) clk_hw_register(&clkBad) ... __clk_register() hw->core = core ... __clk_register() __clk_core_init() clk_prepare_lock() __clk_init_parent() clk_core_get_parent_by_index() clk_core_fill_parent_index() if (entry->hw) { parent = entry->hw->core; At this point, 'parent' points to clkBad even though clkBad hasn't been fully registered yet. Ouch! A similar problem can happen if a clk controller registers orphan clks that are referenced in the DT node of another clk controller. Let's fix all this by only setting the hw->core pointer underneath the clk prepare lock in __clk_core_init(). This way we know that clk_core_fill_parent_index() can't see hw->core be non-NULL until the clk is fully registered. Fixes: fc0c209c147f ("clk: Allow parents to be specified without string names") Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com> Link: https://lore.kernel.org/r/20211109043438.4639-1-quic_mdtipton@quicinc.com [sboyd@kernel.org: Reword commit text, update comment] Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22iio: adc: stm32: fix a current leak by resetting pcsel before disabling vddaFabrice Gasnier
commit f711f28e71e965c0d1141c830fa7131b41abbe75 upstream. Some I/Os are connected to ADC input channels, when the corresponding bit in PCSEL register are set on STM32H7 and STM32MP15. This is done in the prepare routine of stm32-adc driver. There are constraints here, as PCSEL shouldn't be set when VDDA supply is disabled. Enabling/disabling of VDDA supply in done via stm32-adc-core runtime PM routines (before/after ADC is enabled/disabled). Currently, PCSEL remains set when disabling ADC. Later on, PM runtime can disable the VDDA supply. This creates some conditions on I/Os that can start to leak current. So PCSEL needs to be cleared when disabling the ADC. Fixes: 95e339b6e85d ("iio: adc: stm32: add support for STM32H7") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Reviewed-by: Olivier Moysan <olivier.moysan@foss.st.com> Link: https://lore.kernel.org/r/1634905169-23762-1-git-send-email-fabrice.gasnier@foss.st.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22dm btree remove: fix use after free in rebalance_children()Joe Thornber
commit 1b8d2789dad0005fd5e7d35dab26a8e1203fb6da upstream. Move dm_tm_unlock() after dm_tm_dec(). Cc: stable@vger.kernel.org Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22virtio_ring: Fix querying of maximum DMA mapping size for virtio deviceWill Deacon
commit 817fc978b5a29b039db0418a91072b31c9aab152 upstream. virtio_max_dma_size() returns the maximum DMA mapping size of the virtio device by querying dma_max_mapping_size() for the device when the DMA API is in use for the vring. Unfortunately, the device passed is initialised by register_virtio_device() and does not inherit the DMA configuration from its parent, resulting in SWIOTLB errors when bouncing is enabled and the default 256K mapping limit (IO_TLB_SEGSIZE) is not respected: | virtio-pci 0000:00:01.0: swiotlb buffer is full (sz: 294912 bytes), total 1024 (slots), used 725 (slots) Follow the pattern used elsewhere in the virtio_ring code when calling into the DMA layer and pass the parent device to dma_max_mapping_size() instead. Cc: Marc Zyngier <maz@kernel.org> Cc: Quentin Perret <qperret@google.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20211201112018.25276-1-will@kernel.org Acked-by: Jason Wang <jasowang@redhat.com> Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com> Fixes: e6d6dd6c875e ("virtio: Introduce virtio_max_dma_size()") Cc: Joerg Roedel <jroedel@suse.de> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22firmware: arm_scpi: Fix string overflow in SCPI genpd driverSudeep Holla
commit 865ed67ab955428b9aa771d8b4f1e4fb7fd08945 upstream. Without the bound checks for scpi_pd->name, it could result in the buffer overflow when copying the SCPI device name from the corresponding device tree node as the name string is set at maximum size of 30. Let us fix it by using devm_kasprintf so that the string buffer is allocated dynamically. Fixes: 8bec4337ad40 ("firmware: scpi: add device power domain support using genpd") Reported-by: Pedro Batista <pedbap.g@gmail.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Cc: stable@vger.kernel.org Cc: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20211209120456.696879-1-sudeep.holla@arm.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-17hwmon: (dell-smm) Fix warning on /proc/i8k creation errorArmin Wolf
commit dbd3e6eaf3d813939b28e8a66e29d81cdc836445 upstream. The removal function is called regardless of whether /proc/i8k was created successfully or not, the later causing a WARN() on module removal. Fix that by only registering the removal function if /proc/i8k was created successfully. Tested on a Inspiron 3505. Fixes: 039ae58503f3 ("hwmon: Allow to compile dell-smm-hwmon driver without /proc/i8k") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Acked-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20211112171440.59006-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-17drm/amd/display: add connector type check for CRC source setPerry Yuan
[ Upstream commit 2da34b7bb59e1caa9a336e0e20a76b8b6a4abea2 ] [Why] IGT bypass test will set crc source as DPRX,and display DM didn`t check connection type, it run the test on the HDMI connector ,then the kernel will be crashed because aux->transfer is set null for HDMI connection. This patch will skip the invalid connection test and fix kernel crash issue. [How] Check the connector type while setting the pipe crc source as DPRX or auto,if the type is not DP or eDP, the crtc crc source will not be set and report error code to IGT test,IGT will show the this subtest as no valid crtc/connector combinations found. 116.779714] [IGT] amd_bypass: starting subtest 8bpc-bypass-mode [ 117.730996] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 117.731001] #PF: supervisor instruction fetch in kernel mode [ 117.731003] #PF: error_code(0x0010) - not-present page [ 117.731004] PGD 0 P4D 0 [ 117.731006] Oops: 0010 [#1] SMP NOPTI [ 117.731009] CPU: 11 PID: 2428 Comm: amd_bypass Tainted: G OE 5.11.0-34-generic #36~20.04.1-Ubuntu [ 117.731011] Hardware name: AMD CZN/, BIOS AB.FD 09/07/2021 [ 117.731012] RIP: 0010:0x0 [ 117.731015] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 117.731016] RSP: 0018:ffffa8d64225bab8 EFLAGS: 00010246 [ 117.731017] RAX: 0000000000000000 RBX: 0000000000000020 RCX: ffffa8d64225bb5e [ 117.731018] RDX: ffff93151d921880 RSI: ffffa8d64225bac8 RDI: ffff931511a1a9d8 [ 117.731022] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 117.731023] CR2: ffffffffffffffd6 CR3: 000000010d5a4000 CR4: 0000000000750ee0 [ 117.731023] PKRU: 55555554 [ 117.731024] Call Trace: [ 117.731027] drm_dp_dpcd_access+0x72/0x110 [drm_kms_helper] [ 117.731036] drm_dp_dpcd_read+0xb7/0xf0 [drm_kms_helper] [ 117.731040] drm_dp_start_crc+0x38/0xb0 [drm_kms_helper] [ 117.731047] amdgpu_dm_crtc_set_crc_source+0x1ae/0x3e0 [amdgpu] [ 117.731149] crtc_crc_open+0x174/0x220 [drm] [ 117.731162] full_proxy_open+0x168/0x1f0 [ 117.731165] ? open_proxy_open+0x100/0x100 BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1546 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-17drm/amd/display: Fix for the no Audio bug with Tiled DisplaysMustapha Ghaddar
[ Upstream commit 5ceaebcda9061c04f439c93961f0819878365c0f ] [WHY] It seems like after a series of plug/unplugs we end up in a situation where tiled display doesnt support Audio. [HOW] The issue seems to be related to when we check streams changed after an HPD, we should be checking the audio_struct as well to see if any of its values changed. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Mustapha Ghaddar <mustapha.ghaddar@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-17i2c: rk3x: Handle a spurious start completion interrupt flagOndrej Jirman
[ Upstream commit 02fe0fbd8a21e183687925c3a266ae27dda9840f ] In a typical read transfer, start completion flag is being set after read finishes (notice ipd bit 4 being set): trasnfer poll=0 i2c start rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10 i2c read rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b i2c stop rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 33 This causes I2C transfer being aborted in polled mode from a stop completion handler: trasnfer poll=1 i2c start rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10 i2c read rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 0 rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b i2c stop rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 13 i2c stop rk3x-i2c fdd40000.i2c: unexpected irq in STOP: 0x10 Clearing the START flag after read fixes the issue without any obvious side effects. This issue was dicovered on RK3566 when adding support for powering off the RK817 PMIC. Signed-off-by: Ondrej Jirman <megous@megous.com> Reviewed-by: John Keeping <john@metanate.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-17parisc/agp: Annotate parisc agp init functions with __initHelge Deller
[ Upstream commit 8d88382b7436551a9ebb78475c546b670790cbf6 ] Signed-off-by: Helge Deller <deller@gmx.de> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-17net/mlx4_en: Update reported link modes for 1/10GErik Ekman
[ Upstream commit 2191b1dfef7d45f44b5008d2148676d9f2c82874 ] When link modes were initially added in commit 2c762679435dc ("net/mlx4_en: Use PTYS register to query ethtool settings") and later updated for the new ethtool API in commit 3d8f7cc78d0eb ("net: mlx4: use new ETHTOOL_G/SSETTINGS API") the only 1/10G non-baseT link modes configured were 1000baseKX, 10000baseKX4 and 10000baseKR. It looks like these got picked to represent other modes since nothing better was available. Switch to using more specific link modes added in commit 5711a98221443 ("net: ethtool: add support for 1000BaseX and missing 10G link modes"). Tested with MCX311A-XCAT connected via DAC. Before: % sudo ethtool enp3s0 Settings for enp3s0: Supported ports: [ FIBRE ] Supported link modes: 1000baseKX/Full 10000baseKR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 1000baseKX/Full 10000baseKR/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 10000Mb/s Duplex: Full Auto-negotiation: off Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Supports Wake-on: d Wake-on: d Current message level: 0x00000014 (20) link ifdown Link detected: yes With this change: % sudo ethtool enp3s0 Settings for enp3s0: Supported ports: [ FIBRE ] Supported link modes: 1000baseX/Full 10000baseCR/Full 10000baseSR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 1000baseX/Full 10000baseCR/Full 10000baseSR/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 10000Mb/s Duplex: Full Auto-negotiation: off Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Supports Wake-on: d Wake-on: d Current message level: 0x00000014 (20) link ifdown Link detected: yes Tested-by: Michael Stapelberg <michael@stapelberg.ch> Signed-off-by: Erik Ekman <erik@kryo.se> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-17drm/msm/dsi: set default num_data_lanesPhilip Chen
[ Upstream commit cd92cc187c053ab010a1570e2d61d68394a5c725 ] If "data_lanes" property of the dsi output endpoint is missing in the DT, num_data_lanes would be 0 by default, which could cause dsi_host_attach() to fail if dsi->lanes is set to a non-zero value by the bridge driver. According to the binding document of msm dsi controller, the input/output endpoint of the controller is expected to have 4 lanes. So let's set num_data_lanes to 4 by default. Signed-off-by: Philip Chen <philipchen@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20211030100812.1.I6cd9af36b723fed277d34539d3b2ba4ca233ad2d@changeid Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-14misc: fastrpc: fix improper packet size calculationJeya R
commit 3a1bf591e9a410f220b7405a142a47407394a1d5 upstream. The buffer list is sorted and this is not being considered while calculating packet size. This would lead to improper copy length calculation for non-dmaheap buffers which would eventually cause sending improper buffers to DSP. Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method") Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Jeya R <jeyr@codeaurora.org> Link: https://lore.kernel.org/r/1637771481-4299-1-git-send-email-jeyr@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14irqchip: nvic: Fix offset for Interrupt Priority OffsetsVladimir Murzin
commit c5e0cbe2858d278a27d5b3fe31890aea5be064c4 upstream. According to ARM(v7M) ARM Interrupt Priority Offsets located at 0xE000E400-0xE000E5EC, while 0xE000E300-0xE000E33C covers read-only Interrupt Active Bit Registers Fixes: 292ec080491d ("irqchip: Add support for ARMv7-M NVIC") Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211201110259.84857-1-vladimir.murzin@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14irqchip/irq-gic-v3-its.c: Force synchronisation when issuing INVALLWudi Wang
commit b383a42ca523ce54bcbd63f7c8f3cf974abc9b9a upstream. INVALL CMD specifies that the ITS must ensure any caching associated with the interrupt collection defined by ICID is consistent with the LPI configuration tables held in memory for all Redistributors. SYNC is required to ensure that INVALL is executed. Currently, LPI configuration data may be inconsistent with that in the memory within a short period of time after the INVALL command is executed. Signed-off-by: Wudi Wang <wangwudi@hisilicon.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Fixes: cc2d3216f53c ("irqchip: GICv3: ITS command queue") Link: https://lore.kernel.org/r/20211208015429.5007-1-zhangshaokun@hisilicon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14irqchip/armada-370-xp: Fix support for Multi-MSI interruptsPali Rohár
commit d0a553502efd545c1ce3fd08fc4d423f8e4ac3d6 upstream. irq-armada-370-xp driver already sets MSI_FLAG_MULTI_PCI_MSI flag into msi_domain_info structure. But allocated interrupt numbers for Multi-MSI needs to be properly aligned otherwise devices send MSI interrupt with wrong number. Fix this issue by using function bitmap_find_free_region() instead of bitmap_find_next_zero_area() to allocate aligned interrupt numbers. Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: a71b9412c90c ("irqchip/armada-370-xp: Allow allocation of multiple MSIs") Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211125130057.26705-2-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14irqchip/armada-370-xp: Fix return value of armada_370_xp_msi_alloc()Pali Rohár
commit ce20eff57361e72878a772ef08b5239d3ae102b6 upstream. IRQ domain alloc function should return zero on success. Non-zero value indicates failure. Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: fcc392d501bd ("irqchip/armada-370-xp: Use the generic MSI infrastructure") Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211125130057.26705-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: accel: kxcjk-1013: Fix possible memory leak in probe and removeYang Yingliang
commit 70c9774e180d151abaab358108e3510a8e615215 upstream. When ACPI type is ACPI_SMO8500, the data->dready_trig will not be set, the memory allocated by iio_triggered_buffer_setup() will not be freed, and cause memory leak as follows: unreferenced object 0xffff888009551400 (size 512): comm "i2c-SMO8500-125", pid 911, jiffies 4294911787 (age 83.852s) hex dump (first 32 bytes): 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 20 e2 e5 c0 ff ff ff ff ........ ....... backtrace: [<0000000041ce75ee>] kmem_cache_alloc_trace+0x16d/0x360 [<000000000aeb17b0>] iio_kfifo_allocate+0x41/0x130 [kfifo_buf] [<000000004b40c1f5>] iio_triggered_buffer_setup_ext+0x2c/0x210 [industrialio_triggered_buffer] [<000000004375b15f>] kxcjk1013_probe+0x10c3/0x1d81 [kxcjk_1013] Fix it by remove data->dready_trig condition in probe and remove. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: a25691c1f967 ("iio: accel: kxcjk1013: allow using an external trigger") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Cc: <Stable@vger.kernel.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211025124159.2700301-1-yangyingliang@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: ad7768-1: Call iio_trigger_notify_done() on errorLars-Peter Clausen
commit 6661146427cbbce6d1fe3dbb11ff1c487f55799a upstream. IIO trigger handlers must call iio_trigger_notify_done() when done. This must be done even when an error occurred. Otherwise the trigger will be seen as busy indefinitely and the trigger handler will never be called again. The ad7768-1 driver neglects to call iio_trigger_notify_done() when there is an error reading the converter data. Fix this by making sure that iio_trigger_notify_done() is included in the error exit path. Fixes: a5f8c7da3dbe ("iio: adc: Add AD7768-1 ADC basic support") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211101144055.13858-2-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: adc: axp20x_adc: fix charging current reporting on AXP22xEvgeny Boger
commit 92beafb76a31bdc02649eb44e93a8e4f4cfcdbe8 upstream. Both the charging and discharging currents on AXP22x are stored as 12-bit integers, in accordance with the datasheet. It's also confirmed by vendor BSP (axp20x_adc.c:axp22_icharge_to_mA). The scale factor of 0.5 is never mentioned in datasheet, nor in the vendor source code. I think it was here to compensate for erroneous addition bit in register width. Tested on custom A40i+AXP221s board with external ammeter as a reference. Fixes: 0e34d5de961d ("iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs") Signed-off-by: Evgeny Boger <boger@wirenboard.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20211116213746.264378-1-boger@wirenboard.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: at91-sama5d2: Fix incorrect sign extensionGwendal Grignou
commit 652e7df485c6884d552085ae2c73efa6cfea3547 upstream. Use scan_type when processing raw data which also fixes that the sign extension was from the wrong bit. Use channel definition as root of trust and replace constant when reading elements directly using the raw sysfs attributes. Fixes: 6794e23fa3fe ("iio: adc: at91-sama5d2_adc: add support for oversampling resolution") Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Eugen Hristev <eugen.hristev@microchip.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211104082413.3681212-9-gwendal@chromium.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: dln2: Check return value of devm_iio_trigger_register()Lars-Peter Clausen
commit 90751fb9f224e0e1555b49a8aa9e68f6537e4cec upstream. Registering a trigger can fail and the return value of devm_iio_trigger_register() must be checked. Otherwise undefined behavior can occur when the trigger is used. Fixes: 7c0299e879dd ("iio: adc: Add support for DLN2 ADC") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211101133043.6974-1-lars@metafoo.de Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: dln2-adc: Fix lockdep complaintNoralf Trønnes
commit 59f92868176f191eefde70d284bdfc1ed76a84bc upstream. When reading the voltage: $ cat /sys/bus/iio/devices/iio\:device0/in_voltage0_raw Lockdep complains: [ 153.910616] ====================================================== [ 153.916918] WARNING: possible circular locking dependency detected [ 153.923221] 5.14.0+ #5 Not tainted [ 153.926692] ------------------------------------------------------ [ 153.932992] cat/717 is trying to acquire lock: [ 153.937525] c2585358 (&indio_dev->mlock){+.+.}-{3:3}, at: iio_device_claim_direct_mode+0x28/0x44 [ 153.946541] but task is already holding lock: [ 153.952487] c2585860 (&dln2->mutex){+.+.}-{3:3}, at: dln2_adc_read_raw+0x94/0x2bc [dln2_adc] [ 153.961152] which lock already depends on the new lock. Fix this by not calling into the iio core underneath the dln2->mutex lock. Fixes: 7c0299e879dd ("iio: adc: Add support for DLN2 ADC") Cc: Jack Andersen <jackoalan@gmail.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://lore.kernel.org/r/20211018113731.25723-1-noralf@tronnes.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: itg3200: Call iio_trigger_notify_done() on errorLars-Peter Clausen
commit 67fe29583e72b2103abb661bb58036e3c1f00277 upstream. IIO trigger handlers must call iio_trigger_notify_done() when done. This must be done even when an error occurred. Otherwise the trigger will be seen as busy indefinitely and the trigger handler will never be called again. The itg3200 driver neglects to call iio_trigger_notify_done() when there is an error reading the gyro data. Fix this by making sure that iio_trigger_notify_done() is included in the error exit path. Fixes: 9dbf091da080 ("iio: gyro: Add itg3200") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211101144055.13858-1-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: kxsd9: Don't return error code in trigger handlerLars-Peter Clausen
commit 45febe0d63917ee908198c5be08511c64ee1790a upstream. IIO trigger handlers need to return one of the irqreturn_t values. Returning an error code is not supported. The kxsd9 interrupt handler returns an error code if reading the data registers fails. In addition when exiting due to an error the trigger handler does not call `iio_trigger_notify_done()`. Which when not done keeps the triggered disabled forever. Modify the code so that the function returns a valid irqreturn_t value as well as calling `iio_trigger_notify_done()` on all exit paths. Since we can't return the error code make sure to at least log it as part of the error message. Fixes: 0427a106a98a ("iio: accel: kxsd9: Add triggered buffer handling") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211024171251.22896-2-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.46.0) at 2026-01-23 18:18:47 +0000