| Age | Commit message (Collapse) | Author |
|---|
|
commit a17b9841152e7f4621619902b347e2cc39c32996 upstream.
Suspending and resuming the system can sometimes cause the out
URB to get hung after a reset_resume. This causes LED setting
and force feedback to break on resume. To avoid this, just drop
the reset_resume callback so the USB core rebinds xpad to the
wireless pads on resume if a reset happened.
A nice side effect of this change is the LED ring on wireless
controllers is now set correctly on system resume.
Cc: stable@vger.kernel.org
Fixes: 4220f7db1e42 ("Input: xpad - workaround dead irq_out after suspend/ resume")
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20220818154411.510308-3-rojtberg@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b382c5e37344883dc97525d05f1f6b788f549985 upstream.
This is based on multiple commits at https://github.com/paroj/xpad
Cc: stable@vger.kernel.org
Signed-off-by: Jasper Poppe <jgpoppe@gmail.com>
Signed-off-by: Jeremy Palmer <jpalmer@linz.govt.nz>
Signed-off-by: Ruineka <ruinairas1992@gmail.com>
Signed-off-by: Cleber de Mattos Casali <clebercasali@gmail.com>
Signed-off-by: Kyle Gospodnetich <me@kylegospodneti.ch>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20220818154411.510308-2-rojtberg@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1833b6f46d7e2830251a063935ab464256defe22 upstream.
If the tool on the other side (e.g. wmediumd) gets confused
about the rate, we hit a warning in mac80211. Silence that
by effectively duplicating the check here and dropping the
frame silently (in mac80211 it's dropped with the warning).
Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 748bc4dd9e663f23448d8ad7e58c011a67ea1eca upstream.
Previously, the fast pool was dumped into the main pool periodically in
the fast pool's hard IRQ handler. This worked fine and there weren't
problems with it, until RT came around. Since RT converts spinlocks into
sleeping locks, problems cropped up. Rather than switching to raw
spinlocks, the RT developers preferred we make the transformation from
originally doing:
do_some_stuff()
spin_lock()
do_some_other_stuff()
spin_unlock()
to doing:
do_some_stuff()
queue_work_on(some_other_stuff_worker)
This is an ordinary pattern done all over the kernel. However, Sherry
noticed a 10% performance regression in qperf TCP over a 40gbps
InfiniBand card. Quoting her message:
> MT27500 Family [ConnectX-3] cards:
> Infiniband device 'mlx4_0' port 1 status:
> default gid: fe80:0000:0000:0000:0010:e000:0178:9eb1
> base lid: 0x6
> sm lid: 0x1
> state: 4: ACTIVE
> phys state: 5: LinkUp
> rate: 40 Gb/sec (4X QDR)
> link_layer: InfiniBand
>
> Cards are configured with IP addresses on private subnet for IPoIB
> performance testing.
> Regression identified in this bug is in TCP latency in this stack as reported
> by qperf tcp_lat metric:
>
> We have one system listen as a qperf server:
> [root@yourQperfServer ~]# qperf
>
> Have the other system connect to qperf server as a client (in this
> case, it’s X7 server with Mellanox card):
> [root@yourQperfClient ~]# numactl -m0 -N0 qperf 20.20.20.101 -v -uu -ub --time 60 --wait_server 20 -oo msg_size:4K:1024K:*2 tcp_lat
Rather than incur the scheduling latency from queue_work_on, we can
instead switch to running on the next timer tick, on the same core. This
also batches things a bit more -- once per jiffy -- which is okay now
that mix_interrupt_randomness() can credit multiple bits at once.
Reported-by: Sherry Yang <sherry.yang@oracle.com>
Tested-by: Paul Webb <paul.x.webb@oracle.com>
Cc: Sherry Yang <sherry.yang@oracle.com>
Cc: Phillip Goerl <phillip.goerl@oracle.com>
Cc: Jack Vogel <jack.vogel@oracle.com>
Cc: Nicky Veitch <nicky.veitch@oracle.com>
Cc: Colm Harrington <colm.harrington@oracle.com>
Cc: Ramanan Govindarajan <ramanan.govindarajan@oracle.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: stable@vger.kernel.org
Fixes: 58340f8e952b ("random: defer fast pool mixing to worker")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9ee0507e896b45af6d65408c77815800bce30008 upstream.
In order to avoid reading and dirtying two cache lines on every IRQ,
move the work_struct to the bottom of the fast_pool struct. add_
interrupt_randomness() always touches .pool and .count, which are
currently split, because .mix pushes everything down. Instead, move .mix
to the bottom, so that .pool and .count are always in the first cache
line, since .mix is only accessed when the pool is full.
Fixes: 58340f8e952b ("random: defer fast pool mixing to worker")
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cd4f24ae9404fd31fc461066e57889be3b68641b upstream.
Prior to 5.6, when /dev/random was opened with O_NONBLOCK, it would
return -EAGAIN if there was no entropy. When the pools were unified in
5.6, this was lost. The post 5.6 behavior of blocking until the pool is
initialized, and ignoring O_NONBLOCK in the process, went unnoticed,
with no reports about the regression received for two and a half years.
However, eventually this indeed did break somebody's userspace.
So we restore the old behavior, by returning -EAGAIN if the pool is not
initialized. Unlike the old /dev/random, this can only occur during
early boot, after which it never blocks again.
In order to make this O_NONBLOCK behavior consistent with other
expectations, also respect users reading with preadv2(RWF_NOWAIT) and
similar.
Fixes: 30c08efec888 ("random: make /dev/random be almost like /dev/urandom")
Reported-by: Guozihua <guozihua@huawei.com>
Reported-by: Zhongguohua <zhongguohua1@huawei.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Andrew Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eee48781ea199e32c1d0c4732641c494833788ca upstream.
Add support for Dell 5811e (EM7455) with USB-id 0x413c:0x81c2.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6022f210461fef67e6e676fd8544ca02d1bcfa7a upstream.
The passthrough structure is declared off of the stack, so it needs to be
set to zero before copied back to userspace to prevent any unintentional
data leakage. Switch things to be statically allocated which will fill the
unused fields with 0 automatically.
Link: https://lore.kernel.org/r/YxrjN3OOw2HHl9tx@kroah.com
Cc: stable@kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: hdthky <hdthky0@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e78a802a7b4febf53f2a92842f494b01062d85a8 upstream.
Since the most that's mixed into the pool is sizeof(long)*2, don't
credit more than that many bytes of entropy.
Fixes: e3e33fc2ea7f ("random: do not use input pool from hard IRQs")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 766279a8f85df32345dbda03b102ca1ee3d5ddea upstream.
The use of strncpy() is considered deprecated for NUL-terminated
strings[1]. Replace strncpy() with strscpy_pad(), to keep existing
pad-behavior of strncpy, similarly to commit 08de420a8014 ("rpmsg:
glink: Replace strncpy() with strscpy_pad()"). This fixes W=1 warning:
In function ‘qcom_glink_rx_close’,
inlined from ‘qcom_glink_work’ at ../drivers/rpmsg/qcom_glink_native.c:1638:4:
drivers/rpmsg/qcom_glink_native.c:1549:17: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
1549 | strncpy(chinfo.name, channel->name, sizeof(chinfo.name));
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220519073330.7187-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Andrew Chernyakov <acherniakov@astralinux.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e9233917a7e53980664efbc565888163c0a33c3f upstream.
This loop intends to retry a max of 10 times, with some implicit
termination based on the SD_{R,}OCR_S18A bit. Unfortunately, the
termination condition depends on the value reported by the SD card
(*rocr), which may or may not correctly reflect what we asked it to do.
Needless to say, it's not wise to rely on the card doing what we expect;
we should at least terminate the loop regardless. So, check both the
input and output values, so we ensure we will terminate regardless of
the SD card behavior.
Note that SDIO learned a similar retry loop in commit 0797e5f1453b
("mmc: core: Fixup signal voltage switch"), but that used the 'ocr'
result, and so the current pre-terminating condition looks like:
rocr & ocr & R4_18V_PRESENT
(i.e., it doesn't have the same bug.)
This addresses a number of crash reports seen on ChromeOS that look
like the following:
... // lots of repeated: ...
<4>[13142.846061] mmc1: Skipping voltage switch
<4>[13143.406087] mmc1: Skipping voltage switch
<4>[13143.964724] mmc1: Skipping voltage switch
<4>[13144.526089] mmc1: Skipping voltage switch
<4>[13145.086088] mmc1: Skipping voltage switch
<4>[13145.645941] mmc1: Skipping voltage switch
<3>[13146.153969] INFO: task halt:30352 blocked for more than 122 seconds.
...
Fixes: f2119df6b764 ("mmc: sd: add support for signal voltage switch procedure")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220914014010.2076169-1-briannorris@chromium.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e427266460826bea21b70f9b2bb29decfb2c2620 upstream.
SD_ROCR_S18A is already defined and is used to check the rocr value, so
let's replace with already defined values for readability.
Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220706004840.24812-1-cw9316.lee@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7bd7ad3c310cd6766f170927381eea0aa6f46c69 upstream.
The 300 bps rate of SIO devices has been mapped to 9600 bps since
2003... Let's fix the regression.
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a659daf63d16aa883be42f3f34ff84235c302198 upstream.
Syzbot found an issue in usbmon module, where the user space client can
corrupt the monitor's internal memory, causing the usbmon module to
crash the kernel with segfault, UAF, etc.
The reproducer mmaps the /dev/usbmon memory to user space, and
overwrites it with arbitrary data, which causes all kinds of issues.
Return an -EPERM error from mon_bin_mmap() if the flag VM_WRTIE is set.
Also clear VM_MAYWRITE to make it impossible to change it to writable
later.
Cc: "Dmitry Vyukov" <dvyukov@google.com>
Cc: stable <stable@kernel.org>
Fixes: 6f23ee1fefdc ("USB: add binary API to usbmon")
Suggested-by: PaX Team <pageexec@freemail.hu> # for the VM_MAYRITE portion
Link: https://syzkaller.appspot.com/bug?id=2eb1f35d6525fa4a74d75b4244971e5b1411c95a
Reported-by: syzbot+23f57c5ae902429285d7@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Link: https://lore.kernel.org/r/20220919215957.205681-1-tadeusz.struk@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fbfe96869b782364caebae0445763969ddb6ea67 ]
In __qedf_probe(), if qedf->cdev is NULL which means
qed_ops->common->probe() failed, then the program will goto label err1, and
scsi_host_put() will free lport->host pointer. Because the memory qedf
points to is allocated by libfc_host_alloc(), it will be freed by
scsi_host_put(). However, the if statement below label err0 only checks
whether qedf is NULL but doesn't check whether the memory has been freed.
So a UAF bug can occur.
There are two ways to reach the statements below err0. The first one is
described as before, "qedf" should be set to NULL. The second one is goto
"err0" directly. In the latter scenario qedf hasn't been changed and it has
the initial value NULL. As a result the if statement is not reachable in
any situation.
The KASAN logs are as follows:
[ 2.312969] BUG: KASAN: use-after-free in __qedf_probe+0x5dcf/0x6bc0
[ 2.312969]
[ 2.312969] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 2.312969] Call Trace:
[ 2.312969] dump_stack_lvl+0x59/0x7b
[ 2.312969] print_address_description+0x7c/0x3b0
[ 2.312969] ? __qedf_probe+0x5dcf/0x6bc0
[ 2.312969] __kasan_report+0x160/0x1c0
[ 2.312969] ? __qedf_probe+0x5dcf/0x6bc0
[ 2.312969] kasan_report+0x4b/0x70
[ 2.312969] ? kobject_put+0x25d/0x290
[ 2.312969] kasan_check_range+0x2ca/0x310
[ 2.312969] __qedf_probe+0x5dcf/0x6bc0
[ 2.312969] ? selinux_kernfs_init_security+0xdc/0x5f0
[ 2.312969] ? trace_rpm_return_int_rcuidle+0x18/0x120
[ 2.312969] ? rpm_resume+0xa5c/0x16e0
[ 2.312969] ? qedf_get_generic_tlv_data+0x160/0x160
[ 2.312969] local_pci_probe+0x13c/0x1f0
[ 2.312969] pci_device_probe+0x37e/0x6c0
Link: https://lore.kernel.org/r/20211112120641.16073-1-fantasquex@gmail.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Co-developed-by: Wende Tan <twd2.me@gmail.com>
Signed-off-by: Wende Tan <twd2.me@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
failure
[ Upstream commit 8f2b6bc79c32f0fa60df000ae387a790ec80eae9 ]
The driver does not handle the failure case while calling
dma_set_mask_and_coherent API.
In case of failure, capture the return value of API and then report an
error.
Addresses-coverity: Unchecked return value (CHECKED_RETURN)
Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/20220817061125.4720-4-swati.agarwal@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 462bce790e6a7e68620a4ce260cc38f7ed0255d5 ]
Free the allocated resources for missing xlnx,num-fstores property.
Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com>
Link: https://lore.kernel.org/r/20220817061125.4720-3-swati.agarwal@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dea796fcab0a219830831c070b8dc367d7e0f708 ]
Currently, when removing the SCMI PM driver not all the resources
registered with genpd subsystem are properly de-registered.
As a side effect of this after a driver unload/load cycle you get a
splat with a few warnings like this:
| debugfs: Directory 'BIG_CPU0' with parent 'pm_genpd' already present!
| debugfs: Directory 'BIG_CPU1' with parent 'pm_genpd' already present!
| debugfs: Directory 'LITTLE_CPU0' with parent 'pm_genpd' already present!
| debugfs: Directory 'LITTLE_CPU1' with parent 'pm_genpd' already present!
| debugfs: Directory 'LITTLE_CPU2' with parent 'pm_genpd' already present!
| debugfs: Directory 'LITTLE_CPU3' with parent 'pm_genpd' already present!
| debugfs: Directory 'BIG_SSTOP' with parent 'pm_genpd' already present!
| debugfs: Directory 'LITTLE_SSTOP' with parent 'pm_genpd' already present!
| debugfs: Directory 'DBGSYS' with parent 'pm_genpd' already present!
| debugfs: Directory 'GPUTOP' with parent 'pm_genpd' already present!
Add a proper scmi_pm_domain_remove callback to the driver in order to
take care of all the needed cleanups not handled by devres framework.
Link: https://lore.kernel.org/r/20220817172731.1185305-7-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This reverts commit c89849ecfd2e10838b31c519c2a6607266b58f02 which is
commit 66f99628eb24409cb8feb5061f78283c8b65f820 upstream.
It is reported to cause problems on 5.4.y so it should be reverted for
now.
Reported-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/7af02bc3-c0f2-7326-e467-02549e88c9ce@linuxfoundation.org
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bf5835bcdb9635c97f85120dba9bfa21e111130f upstream.
Having IBRS enabled while the SMT sibling is idle unnecessarily slows
down the running sibling. OTOH, disabling IBRS around idle takes two
MSR writes, which will increase the idle latency.
Therefore, only disable IBRS around deeper idle states. Shallow idle
states are bounded by the tick in duration, since NOHZ is not allowed
for them by virtue of their short target residency.
Only do this for mwait-driven idle, since that keeps interrupts disabled
across idle, which makes disabling IBRS vs IRQ-entry a non-issue.
Note: C6 is a random threshold, most importantly C1 probably shouldn't
disable IBRS, benchmarking needed.
Suggested-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
[cascardo: no CPUIDLE_FLAG_IRQ_ENABLE]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[cascardo: context adjustments]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6b80b59b3555706508008f1f127b5412c89c7fd8 upstream.
Report that AMD x86 CPUs are vulnerable to the RETBleed (Arbitrary
Speculative Code Execution with Return Instructions) attack.
[peterz: add hygon]
[kim: invert parity; fam15h]
Co-developed-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
[cascardo: adjusted BUG numbers to match upstream]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ba5bade4cc0d2013cdf5634dae554693c968a090 upstream.
There is no reason that this gunk is in a generic header file. The wildcard
defines need to stay as they are required by file2alias.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lkml.kernel.org/r/20200320131508.736205164@linutronix.de
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1b24a132eba7a1c19475ba2510ec1c00af3ff914 ]
After commit 31fd9b79dc58 ("ARM: dts: BCM5301X: update CRU block
description") a warning from clk-iproc-pll.c was generated due to a
duplicate PLL name as well as the console stopped working. Upon closer
inspection it became clear that iproc_pll_clk_setup() used the Device
Tree node unit name as an unique identifier as well as a parent name to
parent all clocks under the PLL.
BCM5301X was the first platform on which that got noticed because of the
DT node unit name renaming but the same assumptions hold true for any
user of the iproc_pll_clk_setup() function.
The first 'clock-output-names' property is always guaranteed to be
unique as well as providing the actual desired PLL clock name, so we
utilize that to register the PLL and as a parent name of all children
clock.
Fixes: 5fe225c105fd ("clk: iproc: add initial common clock support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20220905161504.1526-1-f.fainelli@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b1ff1bfe81e763420afd5f3f25f0b3cbfd97055c ]
There is no dedicate parent clock for QSPI so SET_RATE_PARENT flag
should not be used. For instance, the default parent clock for QSPI is
pll2_bus, which is also the parent clock for quite a few modules, such
as MMDC, once GPMI NAND set clock rate for EDO5 mode can cause system
hang due to pll2_bus rate changed.
Fixes: f1541e15e38e ("clk: imx6sx: Switch to clk_hw based API")
Signed-off-by: Han Xu <han.xu@nxp.com>
Link: https://lore.kernel.org/r/20220915150959.3646702-1-han.xu@nxp.com
Tested-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c292a337d0e45a292c301e3cd51c35aa0ae91e95 ]
The IOC_PR_CLEAR and IOC_PR_RELEASE ioctls are
non-functional on NVMe devices because the nvme_pr_clear()
and nvme_pr_release() functions set the IEKEY field incorrectly.
The IEKEY field should be set only when the key is zero (i.e,
not specified). The current code does it backwards.
Furthermore, the NVMe spec describes the persistent
reservation "clear" function as an option on the reservation
release command. The current implementation of nvme_pr_clear()
erroneously uses the reservation register command.
Fix these errors. Note that NVMe version 1.3 and later specify
that setting the IEKEY field will return an error of Invalid
Field in Command. The fix will set IEKEY when the key is zero,
which is appropriate as these ioctls consider a zero key to
be "unspecified", and the intention of the spec change is
to require a valid key.
Tested on a version 1.4 PCI NVMe device in an Azure VM.
Fixes: 1673f1f08c88 ("nvme: move block_device_operations and ns/ctrl freeing to common code")
Fixes: 1d277a637a71 ("NVMe: Add persistent reservation ops")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f1c772d581843e3a14bbd62ef7e40b56fc307f27 ]
Add a new line in functions nvme_pr_preempt(), nvme_pr_clear(), and
nvme_pr_release() after variable declaration which follows the rest of
the code in the nvme/host/core.c.
No functional change(s) in this patch.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Stable-dep-of: c292a337d0e4 ("nvme: Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a43206156263fbaf1f2b7f96257441f331e91bb7 ]
Currently usbnet_disconnect() unanchors and frees all deferred URBs
using usb_scuttle_anchored_urbs(), which does not free urb->context,
causing a memory leak as reported by syzbot.
Use a usb_get_from_anchor() while loop instead, similar to what we did
in commit 19cfe912c37b ("Bluetooth: btusb: Fix memory leak in
play_deferred"). Also free urb->sg.
Reported-and-tested-by: syzbot+dcd3e13cf4472f2e0ba1@syzkaller.appspotmail.com
Fixes: 69ee472f2706 ("usbnet & cdc-ether: Autosuspend for online devices")
Fixes: 638c5115a794 ("USBNET: support DMA SG")
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Link: https://lore.kernel.org/r/20220923042551.2745-1-yepeilin.cs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a54dc27bd25f20ee3ea2009584b3166d25178243 ]
devm_gpiod_get_optional() may return ERR_PTR(-EPROBE_DEFER),
add a minus sign to fix it.
Fixes: 6ccb1d8f78bd ("Input: add MELFAS MIP4 Touchscreen driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220924030715.1653538-1-yangyingliang@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
suspend/resume time"
[ Upstream commit cc62d98bd56d45de4531844ca23913a15136c05b ]
This reverts commit 211f276ed3d96e964d2d1106a198c7f4a4b3f4c0.
For quite some time, core DRM helpers already ensure that any relevant
connectors/CRTCs/etc. are disabled, as well as their associated
components (e.g., bridges) when suspending the system. Thus,
analogix_dp_bridge_{enable,disable}() already get called, which in turn
call drm_panel_{prepare,unprepare}(). This makes these drm_panel_*()
calls redundant.
Besides redundancy, there are a few problems with this handling:
(1) drm_panel_{prepare,unprepare}() are *not* reference-counted APIs and
are not in general designed to be handled by multiple callers --
although some panel drivers have a coarse 'prepared' flag that mitigates
some damage, at least. So at a minimum this is redundant and confusing,
but in some cases, this could be actively harmful.
(2) The error-handling is a bit non-standard. We ignored errors in
suspend(), but handled errors in resume(). And recently, people noticed
that the clk handling is unbalanced in error paths, and getting *that*
right is not actually trivial, given the current way errors are mostly
ignored.
(3) In the particular way analogix_dp_{suspend,resume}() get used (e.g.,
in rockchip_dp_*(), as a late/early callback), we don't necessarily have
a proper PM relationship between the DP/bridge device and the panel
device. So while the DP bridge gets resumed, the panel's parent device
(e.g., platform_device) may still be suspended, and so any prepare()
calls may fail.
So remove the superfluous, possibly-harmful suspend()/resume() handling
of panel state.
Fixes: 211f276ed3d9 ("drm: bridge: analogix/dp: add panel prepare/unprepare in suspend/resume time")
Link: https://lore.kernel.org/all/Yv2CPBD3Picg%2FgVe@google.com/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220822180729.1.I8ac5abe3a4c1c6fd5c061686c6e883c22f69022c@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e3c95edb1bd8b9c2cb0caa6ae382fc8080f6a0ed ]
The labels were backward with respect to the register values. The SRAM
is mapped to the CPU when the register value is 1.
Fixes: 5e4fb6429761 ("drivers: soc: sunxi: add support for A64 and its SRAM C")
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220815041248.53268-7-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 49fad91a7b8941979c3e9a35f9894ac45bc5d3d6 ]
Errors from debugfs are intended to be non-fatal, and should not prevent
the driver from probing.
Since debugfs file creation is treated as infallible, move it below the
parts of the probe function that can fail. This prevents an error
elsewhere in the probe function from causing the file to leak. Do the
same for the call to of_platform_populate().
Finally, checkpatch suggests an octal literal for the file permissions.
Fixes: 4af34b572a85 ("drivers: soc: sunxi: Introduce SoC driver to map SRAMs")
Fixes: 5828729bebbb ("soc: sunxi: export a regmap for EMAC clock reg on A64")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220815041248.53268-6-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
devm_platform_ioremap_resource()
[ Upstream commit 1f3753a5f042fea6539986f9caf2552877527d8a ]
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210908071716.772-1-caihuoqing@baidu.com
Stable-dep-of: 49fad91a7b89 ("soc: sunxi: sram: Fix probe function ordering issues")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 90e10a1fcd9b24b4ba8c0d35136127473dcd829e ]
This driver exports a regmap tied to the platform device (as opposed to
a syscon, which exports a regmap tied to the OF node). Because of this,
the driver can never be unbound, as that would destroy the regmap. Use
builtin_platform_driver_probe() to enforce this limitation.
Fixes: 5828729bebbb ("soc: sunxi: export a regmap for EMAC clock reg on A64")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220815041248.53268-5-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fd362baad2e659ef0fb5652f023a606b248f1781 ]
sunxi_sram_claim() checks the sram_desc->claimed flag before updating
the register, with the intent that only one device can claim a region.
However, this was ineffective because the flag was never set.
Fixes: 4af34b572a85 ("drivers: soc: sunxi: Introduce SoC driver to map SRAMs")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220815041248.53268-4-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 37238699073e7e93f05517e529661151173cd458 upstream.
vb2_core_qbuf and vb2_core_querybuf don't check the range of b->index
controlled by the user.
Fix this by adding range checking code before using them.
Fixes: 57868acc369a ("media: videobuf2: Add new uAPI for DVB streaming I/O")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 35ca91d1338ae158f6dcc0de5d1e86197924ffda upstream.
According to the datasheet [1] at page 377, 4-bit bus width is turned on by
bit 2 of the Bus Width Register. Thus the current bitmask is wrong: define
BUS_WIDTH_4 BIT(1)
BIT(1) does not work but BIT(2) works. This has been verified on real MOXA
hardware with FTSDC010 controller revision 1_6_0.
The corrected value of BUS_WIDTH_4 mask collides with: define BUS_WIDTH_8
BIT(2). Additionally, 8-bit bus width mode isn't supported according to the
datasheet, so let's remove the corresponding code.
[1]
https://bitbucket.org/Kasreyn/mkrom-uc7112lx/src/master/documents/FIC8120_DS_v1.2.pdf
Fixes: 1b66e94e6b99 ("mmc: moxart: Add MOXA ART SD/MMC driver")
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220907205753.1577434-1-saproj@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ea08aec7e77bfd6599489ec430f9f859ab84575a upstream.
Commit 1527f69204fe ("ata: ahci: Add Green Sardine vendor ID as
board_ahci_mobile") added an explicit entry for AMD Green Sardine
AHCI controller using the board_ahci_mobile configuration (this
configuration has later been renamed to board_ahci_low_power).
The board_ahci_low_power configuration enables support for low power
modes.
This explicit entry takes precedence over the generic AHCI controller
entry, which does not enable support for low power modes.
Therefore, when commit 1527f69204fe ("ata: ahci: Add Green Sardine
vendor ID as board_ahci_mobile") was backported to stable kernels,
it make some Pioneer optical drives, which was working perfectly fine
before the commit was backported, stop working.
The real problem is that the Pioneer optical drives do not handle low
power modes correctly. If these optical drives would have been tested
on another AHCI controller using the board_ahci_low_power configuration,
this issue would have been detected earlier.
Unfortunately, the board_ahci_low_power configuration is only used in
less than 15% of the total AHCI controller entries, so many devices
have never been tested with an AHCI controller with low power modes.
Fixes: 1527f69204fe ("ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile")
Cc: stable@vger.kernel.org
Reported-by: Jaap Berkhout <j.j.berkhout@staalenberk.nl>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6052a4c11fd893234e085edf7bf2e00a33a79d4e upstream.
This reverts commit fe2c9c61f668cde28dac2b188028c5299cedcc1e.
On Tue, Sep 13, 2022 at 05:48:58PM +0100, Russell King (Oracle) wrote:
>What happens if this is built as a module, and the module is loaded,
>binds (and creates the directory), then is removed, and then re-
>inserted? Nothing removes the old directory, so doesn't
>debugfs_create_dir() fail, resulting in subsequent failure to add
>any subsequent debugfs entries?
>
>I don't think this patch should be backported to stable trees until
>this point is addressed.
Revert until a proper fix is available as the original behavior was
better.
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: stable@kernel.org
Reported-by: Russell King <linux@armlinux.org.uk>
Fixes: fe2c9c61f668 ("net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220923234736.657413-1-sashal@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6726d552a6912e88cf63fe2bda87b2efa0efc7d0 upstream.
Access to registers is guarded by ingenic_tcu_{enable,disable}_regs()
so the stop bit can be cleared before accessing a timer channel, but
those functions did not clear the stop bit on SoCs with a global TCU
clock gate.
Testing on the X1000 has revealed that the stop bits must be cleared
_and_ the global TCU clock must be ungated to access timer registers.
This appears to be the norm on Ingenic SoCs, and is specified in the
documentation for the X1000 and numerous JZ47xx SoCs.
If the stop bit isn't cleared, register writes don't take effect and
the system can be left in a broken state, eg. the watchdog timer may
not run.
The bug probably went unnoticed because stop bits are zeroed when
the SoC is reset, and the kernel does not set them unless a timer
gets disabled at runtime. However, it is possible that a bootloader
or a previous kernel (if using kexec) leaves the stop bits set and
we should not rely on them being cleared.
Fixing this is easy: have ingenic_tcu_{enable,disable}_regs() always
clear the stop bit, regardless of the presence of a global TCU gate.
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Paul Cercueil <paul@crapouillou.net>
Fixes: 4f89e4b8f121 ("clk: ingenic: Add driver for the TCU clocks")
Cc: stable@vger.kernel.org
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220617122254.738900-1-aidanmacdonald.0x0@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 797666cd5af041ffb66642fff62f7389f08566a2 upstream.
Add support for Dell 5811e (EM7455) with USB-id 0x413c:0x81c2.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Cc: stable@vger.kernel.org
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20220926150740.6684-3-linux@fw-web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0fb9703a3eade0bb84c635705d9c795345e55053 upstream.
The UAS mode of Thinkplus(0x17ef, 0x3899) is reported to influence
performance and trigger kernel panic on several platforms with the
following error message:
[ 39.702439] xhci_hcd 0000:0c:00.3: ERROR Transfer event for disabled
endpoint or incorrect stream ring
[ 39.702442] xhci_hcd 0000:0c:00.3: @000000026c61f810 00000000 00000000
1b000000 05038000
[ 720.545894][13] Workqueue: usb_hub_wq hub_event
[ 720.550971][13] ffff88026c143c38 0000000000016300 ffff8802755bb900 ffff880
26cb80000
[ 720.559673][13] ffff88026c144000 ffff88026ca88100 0000000000000000 ffff880
26cb80000
[ 720.568374][13] ffff88026cb80000 ffff88026c143c50 ffffffff8186ae25 ffff880
26ca880f8
[ 720.577076][13] Call Trace:
[ 720.580201][13] [<ffffffff8186ae25>] schedule+0x35/0x80
[ 720.586137][13] [<ffffffff8186b0ce>] schedule_preempt_disabled+0xe/0x10
[ 720.593623][13] [<ffffffff8186cb94>] __mutex_lock_slowpath+0x164/0x1e0
[ 720.601012][13] [<ffffffff8186cc3f>] mutex_lock+0x2f/0x40
[ 720.607141][13] [<ffffffff8162b8e9>] usb_disconnect+0x59/0x290
Falling back to USB mass storage can solve this problem, so ignore UAS
function of this chip.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Link: https://lore.kernel.org/r/1663902249837086.19.seg@mailgw
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e00b488e813f0f1ad9f778e771b7cd2fe2877023 upstream.
The UAS mode of Hiksemi USB_HDD is reported to fail to work on several
platforms with the following error message, then after re-connecting the
device will be offlined and not working at all.
[ 592.518442][ 2] sd 8:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 18
inflight: CMD
[ 592.527575][ 2] sd 8:0:0:0: [sda] tag#17 CDB: Write(10) 2a 00 03 6f 88 00 00
04 00 00
[ 592.536330][ 2] sd 8:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1
inflight: CMD
[ 592.545266][ 2] sd 8:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 07 44 1a 88 00
00 08 00
These disks have a broken uas implementation, the tag field of the status
iu-s is not set properly,so we need to fall-back to usb-storage.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Link: https://lore.kernel.org/r/1663901185-21067-1-git-send-email-zenghongling@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a625a4b8806cc1e928b7dd2cca1fee709c9de56e upstream.
The UAS mode of Hiksemi is reported to fail to work on several platforms
with the following error message, then after re-connecting the device will
be offlined and not working at all.
[ 592.518442][ 2] sd 8:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 18
inflight: CMD
[ 592.527575][ 2] sd 8:0:0:0: [sda] tag#17 CDB: Write(10) 2a 00 03 6f 88 00 00
04 00 00
[ 592.536330][ 2] sd 8:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1
inflight: CMD
[ 592.545266][ 2] sd 8:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 07 44 1a 88 00
00 08 00
These disks have a broken uas implementation, the tag field of the status
iu-s is not set properly,so we need to fall-back to usb-storage.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Link: https://lore.kernel.org/r/1663901173-21020-1-git-send-email-zenghongling@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b0b9408f132623dc88e78adb5282f74e4b64bb57 ]
The mode_valid field in drm_connector_helper_funcs is expected to be of
type:
enum drm_mode_status (* mode_valid) (struct drm_connector *connector,
struct drm_display_mode *mode);
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of cdn_dp_connector_mode_valid should be changed from
int to enum drm_mode_status.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913205555.155149-1-nhuck@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3601d620f22e37740cf73f8278eabf9f2aa19eb7 ]
[Why]
For HDR mode, we get total 512 tf_point and after switching to SDR mode
we actually get 400 tf_point and the rest of points(401~512) still use
dirty value from HDR mode. We should limit the rest of the points to max
value.
[How]
Limit the value when coordinates_x.x > 1, just like what we do in
translate_from_linear_space for other re-gamma build paths.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Yao Wang1 <Yao.Wang1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 66f99628eb24409cb8feb5061f78283c8b65f820 ]
Currently, we aren't handling DRM_IOCTL_MODE_DIRTYFB. So, use
drm_atomic_helper_dirtyfb() as the dirty callback in the amdgpu_fb_funcs
struct.
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
memory region
[ Upstream commit f0880e2cb7e1f8039a048fdd01ce45ab77247221 ]
Passed through PCI device sometimes misbehave on Gen1 VMs when Hyper-V
DRM driver is also loaded. Looking at IOMEM assignment, we can see e.g.
$ cat /proc/iomem
...
f8000000-fffbffff : PCI Bus 0000:00
f8000000-fbffffff : 0000:00:08.0
f8000000-f8001fff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe
...
fe0000000-fffffffff : PCI Bus 0000:00
fe0000000-fe07fffff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe
fe0000000-fe07fffff : 2ba2:00:02.0
fe0000000-fe07fffff : mlx4_core
the interesting part is the 'f8000000' region as it is actually the
VM's framebuffer:
$ lspci -v
...
0000:00:08.0 VGA compatible controller: Microsoft Corporation Hyper-V virtual VGA (prog-if 00 [VGA controller])
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
...
hv_vmbus: registering driver hyperv_drm
hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Synthvid Version major 3, minor 5
hyperv_drm 0000:00:08.0: vgaarb: deactivate vga console
hyperv_drm 0000:00:08.0: BAR 0: can't reserve [mem 0xf8000000-0xfbffffff]
hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Cannot request framebuffer, boot fb still active?
Note: "Cannot request framebuffer" is not a fatal error in
hyperv_setup_gen1() as the code assumes there's some other framebuffer
device there but we actually have some other PCI device (mlx4 in this
case) config space there!
The problem appears to be that vmbus_allocate_mmio() can use dedicated
framebuffer region to serve any MMIO request from any device. The
semantics one might assume of a parameter named "fb_overlap_ok"
aren't implemented because !fb_overlap_ok essentially has no effect.
The existing semantics are really "prefer_fb_overlap". This patch
implements the expected and needed semantics, which is to not allocate
from the frame buffer space when !fb_overlap_ok.
Note, Gen2 VMs are usually unaffected by the issue because
framebuffer region is already taken by EFI fb (in case kernel supports
it) but Gen1 VMs may have this region unclaimed by the time Hyper-V PCI
pass-through driver tries allocating MMIO space if Hyper-V DRM/FB drivers
load after it. Devices can be brought up in any sequence so let's
resolve the issue by always ignoring 'fb_mmio' region for non-FB
requests, even if the region is unclaimed.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20220827130345.1320254-4-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit de5107f473190538a65aac7edea85209cd5c1a8f upstream.
Bus bandwidth array access is based on esit, increase one
will cause out-of-bounds issue; for example, when esit is
XHCI_MTK_MAX_ESIT, will overstep boundary.
Fixes: 7c986fbc16ae ("usb: xhci-mtk: get the microframe boundary for ESIT")
Cc: <stable@vger.kernel.org>
Reported-by: Stan Lu <stan.lu@mediatek.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1629189389-18779-5-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit db7ba07108a48c0f95b74fabbfd5d63e924f992d upstream.
Fix Oops in dasd_alias_get_start_dev() function caused by the pavgroup
pointer being NULL.
The pavgroup pointer is checked on the entrance of the function but
without the lcu->lock being held. Therefore there is a race window
between dasd_alias_get_start_dev() and _lcu_update() which sets
pavgroup to NULL with the lcu->lock held.
Fix by checking the pavgroup pointer with lcu->lock held.
Cc: <stable@vger.kernel.org> # 2.6.25+
Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20220919154931.4123002-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1d10cd4da593bc0196a239dcc54dac24b6b0a74e upstream.
Tx'ing does not correctly account Tx'ed characters into icount.tx.
Using uart_xmit_advance() fixes the problem.
Fixes: 2d908b38d409 ("serial: Add Tegra Combined UART driver")
Cc: <stable@vger.kernel.org> # serial: Create uart_xmit_advance()
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220901143934.8850-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
