| Age | Commit message (Collapse) | Author |
|---|
|
When an eGPU is unplugged the KFD topology should also be destroyed
for that GPU. This never happens because the fini_sw callbacks never
get to run. Run them manually before calling amdgpu_device_ip_fini_early()
when a device has already been disconnected.
This location is intentionally chosen to make sure that the kfd locking
refcount doesn't get incremented unintentionally.
Cc: kent.russell@amd.com
Closes: https://community.frame.work/t/amd-egpu-on-linux/8691/33
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6a23e7b4332c10f8b56c33a9c5431b52ecff9aab)
Cc: stable@vger.kernel.org
|
|
When driver not support atomic, fb using plane->fb rather than
plane->state->fb.
Fixes: fe151ed7af54 ("drm/amdgpu: add generic display panic helper code")
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2f2a72de673513247cd6fae14e53f6c40c5841ef)
|
|
Fix copy&paste error, that should have been an assignment instead of an or,
otherwise MTYPE_UC 0x3 can not be updated to MTYPE_RW 0x1.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fc1366016abe4103c0f0fac882811aea961ef213)
Cc: stable@vger.kernel.org
|
|
Pull NVMe fixes from Keith:
"- Device quirk to disable faulty temperature (Ilikara)
- TCP target null pointer fix from bad host protocol usage (Shivam)
- Add compatible apple controller (Janne)
- FC tagset leak fix (Chaitanya)
- TCP socket deadlock fix (Hannes)
- Target name buffer overrun fix (Shin'ichiro)"
* tag 'nvme-6.19-2026-01-14' of git://git.infradead.org/nvme:
nvme: fix PCIe subsystem reset controller state transition
nvmet: do not copy beyond sybsysnqn string length
nvmet-tcp: fixup hang in nvmet_tcp_listen_data_ready()
nvme-fc: release admin tagset if init fails
nvme-apple: add "apple,t8103-nvme-ans2" as compatible
nvme-tcp: fix NULL pointer dereferences in nvmet_tcp_build_pdu_iovec
nvme-pci: disable secondary temp for Wodposit WPBSNM8
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Only one core change (and one in doc only) the rest are drivers.
The one core fix is for some inline encrypting drives that can't
handle encryption requests on non-data commands (like error handling
ones); it saves the request level encryption parameters in the eh_save
structure so they can be cleared for error handling and restored after
it is completed"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: host: mediatek: Make read-only array scale_us static const
scsi: bfa: Update outdated comment
scsi: mpt3sas: Update maintainer list
scsi: ufs: core: Configure MCQ after link startup
scsi: core: Fix error handler encryption support
scsi: core: Correct documentation for scsi_test_unit_ready()
scsi: ufs: dt-bindings: Fix several grammar errors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- ov02c10: some fixes related to preserving bayer pattern and
horizontal control
- ipu-bridge: Add quirks for some Dell XPS laptops with inverted
sensors
- mali-c55: Fix version identifier logic
- rzg2l-cru: csi-2: fix RZ/V2H input sizes on some variants
* tag 'media/v6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: ov02c10: Remove unnecessary hflip and vflip pointers
media: ipu-bridge: Add DMI quirk for Dell XPS laptops with upside down sensors
media: ov02c10: Fix the horizontal flip control
media: ov02c10: Adjust x-win/y-win when changing flipping to preserve bayer-pattern
media: ov02c10: Fix bayer-pattern change after default vflip change
media: rzg2l-cru: csi-2: Support RZ/V2H input sizes
media: uapi: mali-c55-config: Remove version identifier
media: mali-c55: Remove duplicated version check
media: Documentation: mali-c55: Use v4l2-isp version identifier
|
|
After U-Boot initializes PCIe with "pcie enum", Linux fails to detect
an NVMe disk on some boot cycles with:
phy phy-32f00000.pcie-phy.0: phy poweron failed --> -110
Discussion with NXP identified that the iMX8MP PCIe PHY PLL may fail to
lock when re-initialized without a reset cycle [1].
The issue reproduces on 7% of tested hardware platforms, with a 30-40%
failure rate per affected device across boot cycles.
Insert a reset cycle in the power-on routine to ensure the PHY is
initialized from a known state.
[1] https://community.nxp.com/t5/i-MX-Processors/iMX8MP-PCIe-initialization-in-U-Boot/m-p/2248437#M242401
Signed-off-by: Rafael Beims <rafael.beims@toradex.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251223150254.1075221-1-rafael@beims.me
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The commit d2fe192348f9 (“nvme: only allow entering LIVE from CONNECTING
state”) disallows controller state transitions directly from RESETTING
to LIVE. However, the NVMe PCIe subsystem reset path relies on this
transition to recover the controller on PowerPC (PPC) systems.
On PPC systems, issuing a subsystem reset causes a temporary loss of
communication with the NVMe adapter. A subsequent PCIe MMIO read then
triggers EEH recovery, which restores the PCIe link and brings the
controller back online. For EEH recovery to proceed correctly, the
controller must transition back to the LIVE state.
Due to the changes introduced by commit d2fe192348f9 (“nvme: only allow
entering LIVE from CONNECTING state”), the controller can no longer
transition directly from RESETTING to LIVE. As a result, EEH recovery
exits prematurely, leaving the controller stuck in the RESETTING state.
Fix this by explicitly transitioning the controller state from RESETTING
to CONNECTING and then to LIVE. This satisfies the updated state
transition rules and allows the controller to be successfully recovered
on PPC systems following a PCIe subsystem reset.
Cc: stable@vger.kernel.org
Fixes: d2fe192348f9 ("nvme: only allow entering LIVE from CONNECTING state")
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Based on the reality[1][2] that vb2_dma_sg_alloc() can't alloc buffer with
device DMA limits, those device will always get below error: "swiotlb
buffer is full (sz: 393216 bytes), total 65536 (slots), used 2358 (slots)"
and the uvc gadget function can't work at all.
The videobuf2-dma-sg.c driver doesn't has a formal improve about this issue
till now. For UVC gadget, the videobuf2 subsystem doesn't do dma_map() on
vmalloc returned big buffer when allocate the video buffers, however, it do
it for dma_sg returned buffer. So the issue happens for vb2_dma_sg_alloc().
To workaround the issue, lets retry vb2_reqbufs() with
vb_vmalloc_memops if it fails to allocate buffer with vb2_dma_sg_memops.
If use vmalloced buffer, UVC gadget will allocate some small buffers for
each usb_request to do dma transfer, then uvc driver will memcopy data
from big buffer to small buffer.
Link[1]: https://lore.kernel.org/linux-media/20230828075420.2009568-1-anle.pan@nxp.com/
Link[2]: https://lore.kernel.org/linux-media/20230914145812.12851-1-hui.fang@nxp.com/
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113-uvc-gadget-fix-patch-v2-4-62950ef5bcb5@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
uvcg_queue_init() may fail, but its return value is currently ignored.
Propagate the error code from uvcg_queue_init() to correctly report
initialization failures.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260113-uvc-gadget-fix-patch-v2-3-62950ef5bcb5@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
According to USB specification:
For full-/high-speed isochronous endpoints, the bInterval value is
used as the exponent for a 2^(bInterval-1) value.
To correctly convert bInterval as interval_duration:
interval_duration = 2^(bInterval-1) * frame_interval
Because the unit of video->interval is 100ns, add a comment info to
make it clear.
Fixes: 48dbe731171e ("usb: gadget: uvc: set req_size and n_requests based on the frame interval")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260113-uvc-gadget-fix-patch-v2-2-62950ef5bcb5@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Current req_payload_size calculation has 2 issue:
(1) When the first time calculate req_payload_size for all the buffers,
reqs_per_frame = 0 will be the divisor of DIV_ROUND_UP(). So
the result is undefined.
This happens because VIDIOC_STREAMON is always executed after
VIDIOC_QBUF. So video->reqs_per_frame will be 0 until VIDIOC_STREAMON
is run.
(2) The buf->req_payload_size may be bigger than max_req_size.
Take YUYV pixel format as example:
If bInterval = 1, video->interval = 666666, high-speed:
video->reqs_per_frame = 666666 / 1250 = 534
720p: buf->req_payload_size = 1843200 / 534 = 3452
1080p: buf->req_payload_size = 4147200 / 534 = 7766
Based on such req_payload_size, the controller can't run normally.
To fix above issue, assign max_req_size to buf->req_payload_size when
video->reqs_per_frame = 0. And limit buf->req_payload_size to
video->req_size if it's large than video->req_size. Since max_req_size
is used at many place, add it to struct uvc_video and set the value once
endpoint is enabled.
Fixes: 98ad03291560 ("usb: gadget: uvc: set req_length based on payload by nreqs instead of req_size")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260113-uvc-gadget-fix-patch-v2-1-62950ef5bcb5@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Ignore USB role switches if dwc3-apple is already in the desired state.
The USB-C port controller on M2 and M1/M2 Pro/Max/Ultra devices issues
additional interrupts which result in USB role switches to the already
active role.
Ignore these USB role switches to ensure the USB-C port controller and
dwc3-apple are always in a consistent state. This matches the behaviour
in __dwc3_set_mode() in core.c.
Fixes detecting USB 2.0 and 3.x devices on the affected systems. The
reset caused by the additional role switch appears to leave the USB
devices in a state which prevents detection when the phy and dwc3 is
brought back up again.
Fixes: 0ec946d32ef7 ("usb: dwc3: Add Apple Silicon DWC3 glue layer driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Sven Peter <sven@kernel.org>
Tested-by: Sven Peter <sven@kernel.org> # M1 mac mini and macbook air
Link: https://patch.msgid.link/20260109-apple-dwc3-role-switch-v1-1-11623b0f6222@jannau.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When some wake IRQs are disabled in the device tree, the corresponding
interrupt entries are removed from DT. In such cases, the driver
currently calls platform_get_irq(), which returns -ENXIO and logs
an error like:
tegra-xusb 3610000.usb: error -ENXIO: IRQ index 2 not found
However, not all wake IRQs are mandatory. The hardware can operate
normally even if some wake sources are not defined in DT. To avoid this
false alarm and allow missing wake IRQs gracefully, use
platform_get_irq_optional() instead of platform_get_irq().
Fixes: 5df186e2ef11 ("usb: xhci: tegra: Support USB wakeup function for Tegra234")
Cc: stable <stable@kernel.org>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Wei-Cheng Chen <weichengc@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260112145653.95691-1-weichengc@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 9beeee6584b9aa4f ("USB: EHCI: log a warning if ehci-hcd is not
loaded first") said that ehci-hcd should be loaded before ohci-hcd and
uhci-hcd. However, commit 05c92da0c52494ca ("usb: ohci/uhci - add soft
dependencies on ehci_pci") only makes ohci-pci/uhci-pci depend on ehci-
pci, which is not enough and we may still see the warnings in boot log.
To eliminate the warnings we should make ohci-hcd/uhci-hcd depend on
ehci-hcd. But Alan said that the warning introduced by 9beeee6584b9aa4f
is bogus, we only need the soft dependencies in the PCI level rather
than the HCD level.
However, there is really another neccessary soft dependencies between
ohci-platform/uhci-platform and ehci-platform, which is added by this
patch. The boot logs are below.
1. ohci-platform loaded before ehci-platform:
ohci-platform 1f058000.usb: Generic Platform OHCI controller
ohci-platform 1f058000.usb: new USB bus registered, assigned bus number 1
ohci-platform 1f058000.usb: irq 28, io mem 0x1f058000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
usb 1-4: new low-speed USB device number 2 using ohci-platform
ehci-platform 1f050000.usb: EHCI Host Controller
ehci-platform 1f050000.usb: new USB bus registered, assigned bus number 2
ehci-platform 1f050000.usb: irq 29, io mem 0x1f050000
ehci-platform 1f050000.usb: USB 2.0 started, EHCI 1.00
usb 1-4: device descriptor read/all, error -62
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb 1-4: new low-speed USB device number 3 using ohci-platform
input: YSPRINGTECH USB OPTICAL MOUSE as /devices/platform/bus@10000000/1f058000.usb/usb1/1-4/1-4:1.0/0003:10C4:8105.0001/input/input0
hid-generic 0003:10C4:8105.0001: input,hidraw0: USB HID v1.11 Mouse [YSPRINGTECH USB OPTICAL MOUSE] on usb-1f058000.usb-4/input0
2. ehci-platform loaded before ohci-platform:
ehci-platform 1f050000.usb: EHCI Host Controller
ehci-platform 1f050000.usb: new USB bus registered, assigned bus number 1
ehci-platform 1f050000.usb: irq 28, io mem 0x1f050000
ehci-platform 1f050000.usb: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci-platform 1f058000.usb: Generic Platform OHCI controller
ohci-platform 1f058000.usb: new USB bus registered, assigned bus number 2
ohci-platform 1f058000.usb: irq 29, io mem 0x1f058000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb 2-4: new low-speed USB device number 2 using ohci-platform
input: YSPRINGTECH USB OPTICAL MOUSE as /devices/platform/bus@10000000/1f058000.usb/usb2/2-4/2-4:1.0/0003:10C4:8105.0001/input/input0
hid-generic 0003:10C4:8105.0001: input,hidraw0: USB HID v1.11 Mouse [YSPRINGTECH USB OPTICAL MOUSE] on usb-1f058000.usb-4/input0
In the later case, there is no re-connection for USB-1.0/1.1 devices,
which is expected.
Cc: stable <stable@kernel.org>
Reported-by: Shengwen Xiao <atzlinux@sina.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260112084802.1995923-1-chenhuacai@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that the upstream code has been getting broader test coverage by our
users we occasionally see issues with USB2 devices plugged in during boot.
Before Linux is running, the USB2 PHY has usually been running in device
mode and it turns out that sometimes host->device or device->host
transitions don't work.
The root cause: If the role inside the USB2 PHY is re-configured when it
has already been powered on or when dwc3 has already enabled the ULPI
interface the new configuration sometimes doesn't take affect until dwc3
is reset again. Fix this rare issue by configuring the role much earlier.
Note that the USB3 PHY does not suffer from this issue and actually
requires dwc3 to be up before the correct role can be configured there.
Reported-by: James Calligeros <jcalligeros99@gmail.com>
Reported-by: Janne Grunau <j@jannau.net>
Fixes: 0ec946d32ef7 ("usb: dwc3: Add Apple Silicon DWC3 glue layer driver")
Cc: stable <stable@kernel.org>
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Janne Grunau <j@jannau.net>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://patch.msgid.link/20260109-dwc3-apple-usb2phy-fix-v2-1-ab6b041e3b26@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The for_each_available_child_of_node() calls of_node_put() to
release child_np in each success loop. After breaking from the
loop with the child_np has been released, the code will jump to
the put_child label and will call the of_node_put() again if the
devm_request_threaded_irq() fails. These cause a double free bug.
Fix by returning directly to avoid the duplicate of_node_put().
Fixes: ed2b5a8e6b98 ("phy: phy-rockchip-inno-usb2: support muxed interrupts")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260109154626.2452034-1-vulab@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
include/sdw_type.h provides the function is_sdw_slave() which
requires sdw_slave_type. But sdw_slave_type was not exported.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260112140758.215799-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
EDMA resumes early and suspends late in the system power transition
sequence, while LPI2C enters the NOIRQ stage for both suspend and resume.
This means LPI2C resources become available before EDMA is fully resumed.
Once IRQs are enabled, a slave device may immediately trigger an LPI2C
transfer. If the transfer length meets DMA requirements, the driver will
attempt to use EDMA even though EDMA may still be unavailable.
This timing gap can lead to transfer failures. To prevent this, force
LPI2C to use PIO mode during system-wide suspend and resume transitions.
This reduces dependency on EDMA and avoids using an unready DMA resource.
Fixes: a09c8b3f9047 ("i2c: imx-lpi2c: add eDMA mode support for LPI2C")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
The I2C Hub controller is a simpler GENI I2C variant that doesn't
support DMA at all, add a no_dma flag to make sure it nevers selects
the SE DMA mode with mappable 32bytes long transfers.
Fixes: cacd9643eca7 ("i2c: qcom-geni: add support for I2C Master Hub variant")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Mukesh Kumar Savaliya <mukesh.savaliya@oss.qualcomm.com>>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for the 6.19 cycle
The usual mixed bag of fixes for ancient problems plus some more
recent ones.
adi,ad7280a
- Check for errors from spi_setup().
adi,ad3552r
- Fix potential buffer overflow when setting to use the internal ramp.
adi,ax5695r
- Fill in the data for this device in the chip info table.
adi,ad7606
- Don't store a negative error in an unsigned int.
adi,ad9467
- Fix incorrect register mask value.
adi,adxl380
- Fix inverted condition for whether INT1 interrupt present in dt.
atmel,at91-sama5d2
- Cancel work on remove to avoid a potential use-after-free
invensense,icm45600
- Fix temperature scaling.
samsung,eynos_adc
- Use of_platform_depolulate() to correctly clear up such that child
devices are created correctly if the driver is rebound.
sensiron,scd4x
- Fix incorrect endianness reported to user-space.
st,accel
- Fix gain reported for the iis329dq.
st,lsm6dsx
- Hide event related interfaces on parts that don't support events.
ti,pac1934
- Ensure output of clamp() is used rather than unclamped value.
* tag 'iio-fixes-for-6.19a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: dac: ad3552r-hs: fix out-of-bound write in ad3552r_hs_write_data_source
iio: accel: iis328dq: fix gain values
iio: core: add separate lockdep class for info_exist_lock
iio: chemical: scd4x: fix reported channel endianness
iio: imu: inv_icm45600: fix temperature offset reporting
iio: adc: exynos_adc: fix OF populate on driver rebind
iio: dac: ad5686: add AD5695R to ad5686_chip_info_tbl
iio: accel: adxl380: fix handling of unavailable "INT1" interrupt
iio: imu: st_lsm6dsx: fix iio_chan_spec for sensors without event detection
iio: adc: pac1934: Fix clamped value in pac1934_reg_snapshot
iio: adc: ad9467: fix ad9434 vref mask
iio: adc: ad7606: Fix incorrect type for error return variable
iio: adc: ad7280a: handle spi_setup() errors in probe()
iio: adc: at91-sama5d2_adc: Fix potential use-after-free in sama5d2_adc driver
|
|
The return value calculation was incorrect: `return len - buf_size;`
Initially `len = buf_size`, then `len` decreases with each operation.
This results in a negative return value on success.
Fix by returning `buf_size - len` which correctly calculates the actual
number of bytes written.
Fixes: a976d790f494 ("efi/cper: Add a new helper function to print bitmasks")
Signed-off-by: Morduan Zang <zhangdandan@uniontech.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Commit 6046b49bafff ("drm/sysfb: Share helpers for integer validation")
and commit e8c086880b2b ("drm/sysfb: Share helpers for screen_info
validation") added duplicate function declarations. Remove the latter
ones.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: e8c086880b2b ("drm/sysfb: Share helpers for screen_info validation")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.16+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260108145058.56943-7-tzimmermann@suse.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath into wireless
Jeff Johnson says:
==================
ath.git update for v6.19-rc6
A collection of small bug fixes in ath10k and ath12k.
==================
Link: https://patch.msgid.link/98386125-c0bb-495e-b2ba-2765aaed19d8@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
RSS configuration requires a valid RX indirection table. When the device
reports a single receive queue, rndis_filter_device_add() does not
allocate an indirection table, accepting RSS hash key updates in this
state leads to a hang.
Fix this by gating netvsc_set_rxfh() on ndc->rx_table_sz and return
-EOPNOTSUPP when the table is absent. This aligns set_rxfh with the device
capabilities and prevents incorrect behavior.
Fixes: 962f3fee83a4 ("netvsc: add ethtool ops to get/set RSS key")
Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1768212093-1594-1-git-send-email-gargaditya@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that we've had one bug that occurred in nouveau as the result of
nv50_head_flush_* being called without the appropriate locks, let's add
some lockdep asserts to make sure this doesn't happen in the future.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251219215344.170852-3-lyude@redhat.com
|
|
For a while, I've been seeing a strange issue where some (usually not all)
of the display DMA channels will suddenly hang, particularly when there is
a visible cursor on the screen that is being frequently updated, and
especially when said cursor happens to go between two screens. While this
brings back lovely memories of fixing Intel Skylake bugs, I would quite
like to fix it :).
It turns out the problem that's happening here is that we're managing to
reach nv50_head_flush_set() in our atomic commit path without actually
holding nv50_disp->mutex. This means that cursor updates happening in
parallel (along with any other atomic updates that need to use the core
channel) will race with eachother, which eventually causes us to corrupt
the pushbuffer - leading to a plethora of various GSP errors, usually:
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 00000218 00102680 00000004 00800003
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 0000021c 00040509 00000004 00000001
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 00000000 00000000 00000001 00000001
The reason this is happening is because generally we check whether we need
to set nv50_atom->lock_core at the end of nv50_head_atomic_check().
However, curs507a_prepare is called from the fb_prepare callback, which
happens after the atomic check phase. As a result, this can lead to commits
that both touch the core channel but also don't grab nv50_disp->mutex.
So, fix this by making sure that we set nv50_atom->lock_core in
cus507a_prepare().
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 1590700d94ac ("drm/nouveau/kms/nv50-: split each resource type into their own source files")
Cc: <stable@vger.kernel.org> # v4.18+
Link: https://patch.msgid.link/20251219215344.170852-2-lyude@redhat.com
|
|
Commit 32ece31db4df ("ACPI: PM: s2idle: Only retrieve constraints when
needed") attempted to avoid useless evaluation of LPS0 _DSM Function 1
in lps0_device_attach() because pm_debug_messages_on might never be set
(and that is the case on production systems most of the time), but it
turns out that LPS0 _DSM Function 1 is generally problematic on some
platforms and causes suspend issues to occur when pm_debug_messages_on
is set now.
In Linux, LPS0 _DSM Function 1 is only useful for diagnostics and only
in the cases when the system does not reach the deepest platform idle
state during suspend-to-idle for some reason. If such diagnostics is
not necessary, evaluating it is a loss of time, so using it along with
the other pm_debug_messages_on diagnostics is questionable because the
latter is expected to be suitable for collecting debug information even
during production use of system suspend.
For this reason, add a module parameter called check_lps0_constraints
to control whether or not the list of LPS0 constraints will be checked
in acpi_s2idle_prepare_late_lps0() and so whether or not to evaluate
LPS0 _DSM Function 1 (once) in acpi_s2idle_begin_lps0().
Fixes: 32ece31db4df ("ACPI: PM: s2idle: Only retrieve constraints when needed")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/2827214.mvXUDI8C0e@rafael.j.wysocki
|
|
Commit edd17206e363 ("nvmet: remove redundant subsysnqn field from
ctrl") replaced ctrl->subsysnqn with ctrl->subsys->subsysnqn. This
change works as expected because both point to strings with the same
data. However, their memory allocation lengths differ. ctrl->subsysnqn
had the fixed size defined as NVMF_NQN_FILED_LEN, while
ctrl->subsys->subsysnqn has variable length determined by kstrndup().
Due to this difference, KASAN slab-out-of-bounds occurs at memcpy() in
nvmet_passthru_override_id_ctrl() after the commit. The failure can be
recreated by running the blktests test case nvme/033. To prevent such
failures, replace memcpy() with strscpy(), which copies only the string
length and avoids overruns.
Fixes: edd17206e363 ("nvmet: remove redundant subsysnqn field from ctrl")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The previous 7 KB per queue caused TX unit hangs under heavy
timestamping load. Reducing to 5 KB avoids these hangs and matches
the TSN recommendation in I225/I226 SW User Manual Section 7.5.4.
The 8 KB "freed" by this change is currently unused. This reduction
is not expected to impact throughput, as the i226 is PCIe-limited
for small TSN packets rather than TX-buffer-limited.
Fixes: 0d58cdc902da ("igc: optimize TX packet buffer utilization for TSN mode")
Reported-by: Zdenek Bouska <zdenek.bouska@siemens.com>
Closes: https://lore.kernel.org/netdev/AS1PR10MB5675DBFE7CE5F2A9336ABFA4EBEAA@AS1PR10MB5675.EURPRD10.PROD.OUTLOOK.COM/
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Chwee-Lin Choong <chwee.lin.choong@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The current HW bug workaround checks the TXTT_0 ready bit first,
then reads TXSTMPL_0 twice (before and after reading TXSTMPH_0)
to detect whether a new timestamp was captured by timestamp
register 0 during the workaround.
This sequence has a race: if a new timestamp is captured after
checking the TXTT_0 bit but before the first TXSTMPL_0 read, the
detection fails because both the "old" and "new" values come from
the same timestamp.
Fix by reading TXSTMPL_0 first to establish a baseline, then
checking the TXTT_0 bit. This ensures any timestamp captured
during the race window will be detected.
Old sequence:
1. Check TXTT_0 ready bit
2. Read TXSTMPL_0 (baseline)
3. Read TXSTMPH_0 (interrupt workaround)
4. Read TXSTMPL_0 (detect changes vs baseline)
New sequence:
1. Read TXSTMPL_0 (baseline)
2. Check TXTT_0 ready bit
3. Read TXSTMPH_0 (interrupt workaround)
4. Read TXSTMPL_0 (detect changes vs baseline)
Fixes: c789ad7cbebc ("igc: Work around HW bug causing missing timestamps")
Suggested-by: Avi Shalev <avi.shalev@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Co-developed-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Chwee-Lin Choong <chwee.lin.choong@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The Multi-queue Priority (MQPRIO) and Earliest TxTime First (ETF) offloads
utilize the Time Sensitive Networking (TSN) Tx mode. This mode is always
coupled to IEEE 802.1Qbv time aware shaper (Qbv). Therefore, the driver
sets a default Qbv schedule of all gates opened and a cycle time of
1s. This schedule is set during probe.
However, the following sequence of events lead to Tx issues:
- Boot a dual core system
igc_probe():
igc_tsn_clear_schedule():
-> Default Schedule is set
Note: At this point the driver has allocated two Tx/Rx queues, because
there are only two CPUs.
- ethtool -L enp3s0 combined 4
igc_ethtool_set_channels():
igc_reinit_queues()
-> Default schedule is gone, per Tx ring start and end time are zero
- tc qdisc replace dev enp3s0 handle 100 parent root mqprio \
num_tc 4 map 3 3 2 2 0 1 1 1 3 3 3 3 3 3 3 3 \
queues 1@0 1@1 1@2 1@3 hw 1
igc_tsn_offload_apply():
igc_tsn_enable_offload():
-> Writes zeros to IGC_STQT(i) and IGC_ENDQT(i), causing Tx to stall/fail
Therefore, restore the default Qbv schedule after changing the number of
channels.
Furthermore, add a restriction to not allow queue reconfiguration when
TSN/Qbv is enabled, because it may lead to inconsistent states.
Fixes: c814a2d2d48f ("igc: Use default cycle 'start' and 'end' values for queues")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The commit 5f6df173f92e ("ice: implement and use rd32_poll_timeout for
ice_sq_done timeout") converted ICE_CTL_Q_SQ_CMD_TIMEOUT from jiffies
to microseconds.
But the ice_release_res() function was missed, and its logic still
treats ICE_CTL_Q_SQ_CMD_TIMEOUT as a jiffies value.
So correct the issue by usecs_to_jiffies().
Found by inspection of the DDP downloading process.
Compile and modprobe tested only.
Fixes: 5f6df173f92e ("ice: implement and use rd32_poll_timeout for ice_sq_done timeout")
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When the user issues an administrative down to an interface that is the
primary for an aggregate bond, the prune lists are being purged. This
breaks communication to the secondary interface, which shares a prune
list on the main switch block while bonded together.
For the primary interface of an aggregate, avoid deleting these prune
lists during stop, and since they are hardcoded to specific values for
the default vlan and QinQ vlans, the attempt to re-add them during the
up phase will quietly fail without any additional problem.
Fixes: 1e0f9881ef79 ("ice: Flesh out implementation of support for SRIOV on bonded interface")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The u64_stats_sync structure is empty on 64-bit systems. However, on 32-bit
systems it contains a seqcount_t which needs to be initialized. While the
memory is zero-initialized, a lack of u64_stats_init means that lockdep
won't get initialized properly. Fix this by adding u64_stats_init() calls
to the rings just after allocation.
Fixes: 2b245cb29421 ("ice: Implement transmit and NAPI support")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Minor fixes and cleanups for the MSHV driver
* tag 'hyperv-fixes-signed-20260112' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
mshv: release mutex on region invalidation failure
hyperv: Avoid -Wflex-array-member-not-at-end warning
mshv: hide x86-specific functions on arm64
mshv: Initialize local variables early upon region invalidation
mshv: Use PMD_ORDER instead of HPAGE_PMD_ORDER when processing regions
|
|
Commit 53326135d0e0 ("i2c: riic: Add suspend/resume support") added
suspend support for the Renesas I2C driver and following this change
on RZ/G3E the following WARNING is seen on entering suspend ...
[ 134.275704] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 134.285536] ------------[ cut here ]------------
[ 134.290298] i2c i2c-2: Transfer while suspended
[ 134.295174] WARNING: drivers/i2c/i2c-core.h:56 at __i2c_smbus_xfer+0x1e4/0x214, CPU#0: systemd-sleep/388
[ 134.365507] Tainted: [W]=WARN
[ 134.368485] Hardware name: Renesas SMARC EVK version 2 based on r9a09g047e57 (DT)
[ 134.375961] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 134.382935] pc : __i2c_smbus_xfer+0x1e4/0x214
[ 134.387329] lr : __i2c_smbus_xfer+0x1e4/0x214
[ 134.391717] sp : ffff800083f23860
[ 134.395040] x29: ffff800083f23860 x28: 0000000000000000 x27: ffff800082ed5d60
[ 134.402226] x26: 0000001f4395fd74 x25: 0000000000000007 x24: 0000000000000001
[ 134.409408] x23: 0000000000000000 x22: 000000000000006f x21: ffff800083f23936
[ 134.416589] x20: ffff0000c090e140 x19: ffff0000c090e0d0 x18: 0000000000000006
[ 134.423771] x17: 6f63657320313030 x16: 2e30206465737061 x15: ffff800083f23280
[ 134.430953] x14: 0000000000000000 x13: ffff800082b16ce8 x12: 0000000000000f09
[ 134.438134] x11: 0000000000000503 x10: ffff800082b6ece8 x9 : ffff800082b16ce8
[ 134.445315] x8 : 00000000ffffefff x7 : ffff800082b6ece8 x6 : 80000000fffff000
[ 134.452495] x5 : 0000000000000504 x4 : 0000000000000000 x3 : 0000000000000000
[ 134.459672] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000c9ee9e80
[ 134.466851] Call trace:
[ 134.469311] __i2c_smbus_xfer+0x1e4/0x214 (P)
[ 134.473715] i2c_smbus_xfer+0xbc/0x120
[ 134.477507] i2c_smbus_read_byte_data+0x4c/0x84
[ 134.482077] isl1208_i2c_read_time+0x44/0x178 [rtc_isl1208]
[ 134.487703] isl1208_rtc_read_time+0x14/0x20 [rtc_isl1208]
[ 134.493226] __rtc_read_time+0x44/0x88
[ 134.497012] rtc_read_time+0x3c/0x68
[ 134.500622] rtc_suspend+0x9c/0x170
The warning is triggered because I2C transfers can still be attempted
while the controller is already suspended, due to inappropriate ordering
of the system sleep callbacks.
If the controller is autosuspended, there is no way to wake it up once
runtime PM disabled (in suspend_late()). During system resume, the I2C
controller will be available only after runtime PM is re-enabled
(in resume_early()). However, this may be too late for some devices.
Wake up the controller in the suspend() callback while runtime PM is
still enabled. The I2C controller will remain available until the
suspend_noirq() callback (pm_runtime_force_suspend()) is called. During
resume, the I2C controller can be restored by the resume_noirq() callback
(pm_runtime_force_resume()). Finally, the resume() callback re-enables
autosuspend. As a result, the I2C controller can remain available until
the system enters suspend_noirq() and from resume_noirq().
Cc: stable@vger.kernel.org
Fixes: 53326135d0e0 ("i2c: riic: Add suspend/resume support")
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Translation functions may return an invalid address in case of errors.
If the address is not checked the further use of the invalid value
will cause an address corruption.
Consistently check for a valid address returned by translation
functions. Use RESOURCE_SIZE_MAX to indicate an invalid address for
type resource_size_t. Depending on the type either RESOURCE_SIZE_MAX
or ULLONG_MAX is used to indicate an address error.
Propagating an invalid address from a failed translation may cause
userspace to think it has received a valid SPA, when in fact it is
wrong. The CXL userspace API, using trace events, expects ULLONG_MAX
to indicate a translation failure. If ULLONG_MAX is not returned
immediately, subsequent calculations can transform that bad address
into a different value (!ULLONG_MAX), and an invalid SPA may be
returned to userspace. This can lead to incorrect diagnostics and
erroneous corrective actions.
[ dj: Added user impact statement from Alison. ]
[ dj: Fixed checkpatch tab alignment issue. ]
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Fixes: c3dd67681c70 ("cxl/region: Add inject and clear poison by region offset")
Fixes: b78b9e7b7979 ("cxl/region: Refactor address translation funcs for testing")
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260107120544.410993-1-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
When the socket is closed while in TCP_LISTEN a callback is run to
flush all outstanding packets, which in turns calls
nvmet_tcp_listen_data_ready() with the sk_callback_lock held.
So we need to check if we are in TCP_LISTEN before attempting
to get the sk_callback_lock() to avoid a deadlock.
Link: https://lore.kernel.org/linux-nvme/CAHj4cs-zu7eVB78yUpFjVe2UqMWFkLk8p+DaS3qj+uiGCXBAoA@mail.gmail.com/
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Wrong P2P device link id value of 0 was introduced in ath12k_mac_op_tx() by [1].
During the P2P negotiation process, there is only one scan vdev with link ID 15.
Currently, the device link ID is incorrectly set to 0 in ath12k_mac_op_tx()
during the P2P negotiation process, which leads to TX failures.
Set the correct P2P device link ID to 15 to fix the TX failure issue.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Fixes: 648a121bafa3 ("wifi: ath12k: ath12k_mac_op_tx(): MLO support") # [1]
Signed-off-by: Yingying Tang <yingying.tang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Cc: linux-next@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://patch.msgid.link/20260113054636.2620035-1-yingying.tang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
---
Note to linux-next and netdev maintainers:
This patch going through the "current" tree conflicts with
the following going through the "next" tree:
commit 631ee338f04d ("Merge branch 'ath12k-ng' into ath-next")
The conflict resolution is to leave the following file unmodified:
drivers/net/wireless/ath/ath12k/mac.
And to apply the following patch to ath12k_wifi7_mac_op_tx()
in the file drivers/net/wireless/ath/ath12k/wifi7/hw.c -705,7 +705,10
return;
}
} else {
- link_id = 0;
+ if (vif->type == NL80211_IFTYPE_P2P_DEVICE)
+ link_id = ATH12K_FIRST_SCAN_LINK;
+ else
+ link_id = 0;
}
arvif = rcu_dereference(ahvif->link[link_id]);
|
|
Commit [1] converted the management transmission work item into a
wiphy work. Since a wiphy work can only run under wiphy lock
protection, a race condition happens in below scenario:
1. a management frame is queued for transmission.
2. ath12k_mac_op_flush() gets called to flush pending frames associated
with the hardware (i.e, vif being NULL). Then in ath12k_mac_flush()
the process waits for the transmission done.
3. Since wiphy lock has been taken by the flush process, the transmission
work item has no chance to run, hence the dead lock.
>From user view, this dead lock results in below issue:
wlp8s0: authenticate with xxxxxx (local address=xxxxxx)
wlp8s0: send auth to xxxxxx (try 1/3)
wlp8s0: authenticate with xxxxxx (local address=xxxxxx)
wlp8s0: send auth to xxxxxx (try 1/3)
wlp8s0: authenticated
wlp8s0: associate with xxxxxx (try 1/3)
wlp8s0: aborting association with xxxxxx by local choice (Reason: 3=DEAUTH_LEAVING)
ath12k_pci 0000:08:00.0: failed to flush mgmt transmit queue, mgmt pkts pending 1
The dead lock can be avoided by invoking wiphy_work_flush() to proactively
run the queued work item. Note actually it is already present in
ath12k_mac_op_flush(), however it does not protect the case where vif
being NULL. Hence move it ahead to cover this case as well.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Fixes: 56dcbf0b5207 ("wifi: ath12k: convert struct ath12k::wmi_mgmt_tx_work to struct wiphy_work") # [1]
Reported-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220959
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260113-ath12k-fix-dead-lock-while-flushing-v1-1-9713621f3a0f@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Scan finish workqueue was introduced in __ath12k_mac_scan_finish() by [1].
During ath12k_mac_op_cancel_remain_on_channel(), scan state is set to
ABORTING and should be reset to IDLE in the queued work. However,
wiphy_work_cancel() is called before exiting
ath12k_mac_op_cancel_remain_on_channel(), which prevents the work
from running and leaves the state in ABORTING. This blocks all
subsequent scan requests.
Replace wiphy_work_cancel() with wiphy_work_flush() to ensure the
queued work runs and scan state is reset to IDLE.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Fixes: 3863f014ad23 ("wifi: ath12k: symmetrize scan vdev creation and deletion during HW scan") # [1]
Signed-off-by: Yingying Tang <yingying.tang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260112115516.2144219-1-yingying.tang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Cancel the scheduled scan request only on the vdev that has an active
scan running. Currently, ahvif->links_map is used to obtain the links,
but this includes links for which no scan is scheduled. In failure cases
where the scan fails due to an invalid channel definition, other links
which are not yet brought up (vdev not created) may also be accessed,
leading to the following trace:
Unable to handle kernel paging request at virtual address 0000000000004c8c
pc : _raw_spin_lock_bh+0x1c/0x54
lr : ath12k_scan_abort+0x20/0xc8 [ath12k]
Call trace:
_raw_spin_lock_bh+0x1c/0x54 (P)
ath12k_mac_op_cancel_hw_scan+0xac/0xc4 [ath12k]
ieee80211_scan_cancel+0xcc/0x12c [mac80211]
ieee80211_do_stop+0x6c4/0x7a8 [mac80211]
ieee80211_stop+0x60/0xd8 [mac80211]
Skip links that are not created or are not the current scan vdev. This
ensures only the scan for the matching links is aborted and avoids
aborting unrelated links during cancellation, thus aligning with how
start/cleanup manage ar->scan.arvif.
Also, remove the redundant arvif->is_started check from
ath12k_mac_op_cancel_hw_scan() that was introduced in commit 3863f014ad23
("wifi: ath12k: symmetrize scan vdev creation and deletion during HW
scan") to avoid deleting the scan interface if the scan is triggered on
the existing AP vdev as this use case is already handled in
ath12k_scan_vdev_clean_work().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: feed05f1526e ("wifi: ath12k: Split scan request for split band device")
Signed-off-by: Manish Dharanenthiran <manish.dharanenthiran@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260107-scan_vdev-v1-1-b600aedc645a@qti.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The Fintek F81532A/534A/535/536 family relies on the
F81534A_CTRL_CMD_ENABLE_PORT (116h) register during initialization to
both determine serial port status and control port creation. If the
driver experiences fast load/unload cycles, the device state may becomes
unstable, resulting in the incomplete generation of serial ports.
Performing a dummy read operation on the register prior to the initial
write command resolves the issue. This clears the device's stale internal
state. Subsequent write operations will correctly generate all serial
ports.
This patch also removes the retry loop in f81534a_ctrl_set_register()
because the stale state has been fixed.
Tested on: HygonDM1SLT(Hygon C86 3250 8-core Processor)
Signed-off-by: Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
When CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION is enabled, the null-blk
driver sets up fault injection support by creating the timeout_inject,
requeue_inject, and init_hctx_fault_inject configfs items as children
of the top-level nullbX configfs group.
However, when the nullbX device is removed, the references taken to
these fault-config configfs items are not released. As a result,
kmemleak reports a memory leak, for example:
unreferenced object 0xc00000021ff25c40 (size 32):
comm "mkdir", pid 10665, jiffies 4322121578
hex dump (first 32 bytes):
69 6e 69 74 5f 68 63 74 78 5f 66 61 75 6c 74 5f init_hctx_fault_
69 6e 6a 65 63 74 00 88 00 00 00 00 00 00 00 00 inject..........
backtrace (crc 1a018c86):
__kmalloc_node_track_caller_noprof+0x494/0xbd8
kvasprintf+0x74/0xf4
config_item_set_name+0xf0/0x104
config_group_init_type_name+0x48/0xfc
fault_config_init+0x48/0xf0
0xc0080000180559e4
configfs_mkdir+0x304/0x814
vfs_mkdir+0x49c/0x604
do_mkdirat+0x314/0x3d0
sys_mkdir+0xa0/0xd8
system_call_exception+0x1b0/0x4f0
system_call_vectored_common+0x15c/0x2ec
Fix this by explicitly releasing the references to the fault-config
configfs items when dropping the reference to the top-level nullbX
configfs group.
Cc: stable@vger.kernel.org
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Fixes: bb4c19e030f4 ("block: null_blk: make fault-injection dynamically configurable per device")
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
On disconnect drm_atomic_helper_disable_all() is called which
sets both the fb and crtc for a plane to NULL before invoking a commit.
This causes a kernel oops on every display disconnect.
Add guards for those dereferences.
Cc: <stable@vger.kernel.org> # 6.18.x
Fixes: 73cfd166e045 ("drm/gud: Replace simple display pipe with DRM atomic helpers")
Signed-off-by: Shenghao Yang <me@shenghaoyang.info>
Reviewed-by: Ruben Wauters <rubenru09@aol.com>
Signed-off-by: Ruben Wauters <rubenru09@aol.com>
Link: https://patch.msgid.link/20251231055039.44266-1-me@shenghaoyang.info
|
|
The vendor provides instructions to write "0403 bd90" to
/sys/bus/usb-serial/drivers/ftdi_sio/new_id; see:
https://picaxe.com/docs/picaxe_linux_instructions.pdf
Cc: stable@vger.kernel.org
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Commit d633b8a702ab ("libata: print feature list on device scan")
added a print of the features supported by the device for ATA_DEV_ATA and
ATA_DEV_ZAC devices, but not for ATA_DEV_ATAPI devices.
Fix this by printing the features also for ATAPI devices.
Before changes:
ata1.00: ATAPI: Slimtype DVD A DU8AESH, 6C2M, max UDMA/133
After changes:
ata1.00: ATAPI: Slimtype DVD A DU8AESH, 6C2M, max UDMA/133
ata1.00: Features: Dev-Attention HIPM DIPM
Fixes: d633b8a702ab ("libata: print feature list on device scan")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Wolf <wolf@yoxt.cc>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
ata_dev_print_features() is supposed to return early and not print anything
if there are no features supported.
However, commit b1f5af54f1f5 ("ata: libata-core: Advertize device support
for DIPM and HIPM features") added additional features to
ata_dev_print_features() without updating the early return conditional.
Add the missing features to the early return conditional.
Fixes: b1f5af54f1f5 ("ata: libata-core: Advertize device support for DIPM and HIPM features")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Wolf <wolf@yoxt.cc>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
ata_dev_print_features() is supposed to return early and not print anything
if there are no features supported.
However, commit fe22e1c2f705 ("libata: support concurrent positioning
ranges log") added another feature to ata_dev_print_features() without
updating the early return conditional.
Add the missing feature to the early return conditional.
Fixes: fe22e1c2f705 ("libata: support concurrent positioning ranges log")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Wolf <wolf@yoxt.cc>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
