| Age | Commit message (Collapse) | Author |
|---|
|
commit bf988435bd5b53529f4408a8efb1f433f6ddfda9 upstream.
struct ethtool_rxnfc was originally defined in 2.6.27 for the
ETHTOOL_{G,S}RXFH command with only the cmd, flow_type and data
fields. It was then extended in 2.6.30 to support various additional
commands. These commands should have been defined to use a new
structure, but it is too late to change that now.
Since user-space may still be using the old structure definition
for the ETHTOOL_{G,S}RXFH commands, and since they do not need the
additional fields, only copy the originally defined fields to and
from user-space.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
from a specified file.
This patch adds support to flash a firmware image to a device using ethtool.
The driver gets the filename of the firmware image and flashes the image
using the request firmware path.
The region "on the chip" to be flashed can be specified by an option.
It is upto the device driver to enumerate the region number passed by ethtool,
to the region to be flashed.
The default behavior is to flash all the regions on the chip.
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ethtool is a standard way of getting information about
ethernet interfaces. We enhance ethtool kernel interface
& e1000e to make the MDI-X status readable via ethtool in
userspace.
Signed-off-by: Chaitanya Lala <clala@riverbed.com>
Signed-off-by: Arthur Jones <ajones@riverbed.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Compile-tested only.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add mdio_support and lp_advertising fields to ethtool_cmd. Set these
in mdio45_ethtool_gset{,_npage}().
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a PORT_OTHER to represent all other physical port types. Current
NICs generally do not allow switching between multiple port types in
software so specific types should not be needed.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Santwona Behera <santwona.behera@sun.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the ethtool ops to enable and disable GRO. It also
makes GRO depend on RX checksum offload much the same as how TSO
depends on SG support.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce the speed_hi field to ethtool_cmd, using the reserved space,
to expand the speed field to 2^32 Megabits/second.
Making this field expansion now gives us plenty of time to fix up the
user-space pieces that use SIOCETHTOOL before hardware faster than 64
Gb/s is available.
Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
|
|
Added new interfaces to ethtool to configure receive network flow
distribution across multiple rx rings using hashing.
Signed-off-by: Santwona Behera <santwona.behera@sun.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Kirill A. Shutemov <k.shutemov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
|
|
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All drivers implement ethtool get_perm_addr the same way -- by calling
the generic function. So we can inline the generic function into the
caller and avoid going through the drivers.
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add ethtool utility function to set or clear IPV6_CSUM feature flag.
Modify tg3.c and bnx2.c to use this function when doing ethtool -K
to change tx checksum.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add 2.5G supported and advertising bit definitions. 2.5G is supported
by the bnx2 driver.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a generic segmentation offload toggle that can be turned
on/off for each net device. For now it only supports in TCPv4.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
They shouldn't be using 'u32' et al in structures which are used for
communication with userspace. Switch to the proper types (__u32 etc).
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
|
|
Add 5708 copper and serdes basic support, including 2.5 Gbps support
on 5708 serdes. SPEED_2500 is also added to ethtool.h
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Attached is kernel patch for UDP Fragmentation Offload (UFO) feature.
1. This patch incorporate the review comments by Jeff Garzik.
2. Renamed USO as UFO (UDP Fragmentation Offload)
3. udp sendfile support with UFO
This patches uses scatter-gather feature of skb to generate large UDP
datagram. Below is a "how-to" on changes required in network device
driver to use the UFO interface.
UDP Fragmentation Offload (UFO) Interface:
-------------------------------------------
UFO is a feature wherein the Linux kernel network stack will offload the
IP fragmentation functionality of large UDP datagram to hardware. This
will reduce the overhead of stack in fragmenting the large UDP datagram to
MTU sized packets
1) Drivers indicate their capability of UFO using
dev->features |= NETIF_F_UFO | NETIF_F_HW_CSUM | NETIF_F_SG
NETIF_F_HW_CSUM is required for UFO over ipv6.
2) UFO packet will be submitted for transmission using driver xmit routine.
UFO packet will have a non-zero value for
"skb_shinfo(skb)->ufo_size"
skb_shinfo(skb)->ufo_size will indicate the length of data part in each IP
fragment going out of the adapter after IP fragmentation by hardware.
skb->data will contain MAC/IP/UDP header and skb_shinfo(skb)->frags[]
contains the data payload. The skb->ip_summed will be set to CHECKSUM_HW
indicating that hardware has to do checksum calculation. Hardware should
compute the UDP checksum of complete datagram and also ip header checksum of
each fragmented IP packet.
For IPV6 the UFO provides the fragment identification-id in
skb_shinfo(skb)->ip6_frag_id. The adapter should use this ID for generating
IPv6 fragments.
Signed-off-by: Ananda Raju <ananda.raju@neterion.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (forwarded)
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
|
|
This patch adds a new field to net device to hold the permanent
hardware address, and adds a new generic ethtool_op function to
get that address.
Signed-off-by: Jon Wetzel <jon_wetzel@dell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ethernet drivers to remain as ignorant as is reasonable of the connected
PHY's design and operation details.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
|
|
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Several ethernet drivers have been broken by the ethtool support because
the ioctl code used to power the interface up and down as needed. Rather
than add this to each driver call Jeff Garzik suggested we add hooks
for before/after ethtool processing.
This patch implements them which makes fixing the PM stuff easier,
as the epic100 patch to follow will show. It also cleans up the
via-velocity driver pm/ethtool logic a great deal. As per Jeff's
request the before handler is allowed to fail the operation.
--
The contribution herein included is a creation of Red Hat Inc. It is hereby
submitted under the license of the existing files and as a derivative work
thereof. I know of no reason for not having the right to submit the
work herein included.
(Bluff your way in legalese ;))
|
|
Finally got around to adding ethtool_ops to e100-3.0.x. I found a bug
with get_eeprom() and it seems to work best if we add get_eeprom_len() to
the ops list. Also moved check for offest + len < size into ethtool.c.
I was able to test [GS]EEPROM, PHYS_ID, GSTATS, GSTRINGS, and TEST, and
everything looks good.
Should I send same for 2.4?
|
|
where it belongs.
|
|
|
|
|
|
Contributed by Matthew Wilcox.
|
|
[ GregKH has already done this is USB and PCI core. ]
From: "Warren A. Layton" <zeevon@debian.org>
Based on a request from Matthew Wilcox, convert instances of
pci_dev->slot_name to use pci_name() instead:
"In order to support PCI Domains, we have to stop using slot_name.
It's related to driver model transition too since pci_dev->slot_name
was redundant with pci_dev->dev.bus_id. So I introduced the inline
function pci_name(). Now there's about 300-400 places in the tree
that're using slot_name which need to be converted to use pci_name().
once that's done, we can remove the slot_name pointer in pci_dev and
save a (void *) per pci_dev."
|
|
* Add TSO get/set command to ethtool interface. Applies to both 2.4/2.5.
Ethtool application patch sent under separate cover.
|
|
dev_ioctl already checks capable(CAP_NET_ADMIN) for SOICETHTOOL, so
privileged reference are not necessary.
|
|
Add 10GbE support for ethtool.
|
|
This fixes:
tranceiver -> transceiver
Some function names had this misspelling (e.g. e100_reset_tranceiver)
and I changed them, but I haven't tested it.
Fixes 34 occurrences in all.
|
|
|
|
|
|
|
|
Contributed by Eli Kupermann @ Intel, modified by me.
|
|
coalescing, ring params, pause params, hw csum disable/enable,
scatter-gather enable/disable
|
|
- Jeff Garzik: network driver updates
- Christoph Hellwig: UFS filesystem byteorder cleanups
- me: modified Andrea VM page allocator tuning
|
|
- Ivan Kokshaysky: fix alpha dec_and_lock with modules, for alpha config entry
- Kai Germaschewski: ISDN updates
- Jeff Garzik: network driver updates, sysv fs update
- Kai Mäkisara: SCSI tape update
- Alan Cox: large drivers merge
- Nikita Danilov: reiserfs procfs information
- Andrew Morton: ext3 merge
- Christoph Hellwig: vxfs livelock fix
- Trond Myklebust: NFS updates
- Jens Axboe: cpqarray + cciss dequeue fix
- Tim Waugh: parport_serial base_baud setting
- Matthew Dharm: usb-storage Freecom driver fixes
- Dave McCracken: wait4() thread group race fix
|
|
- Al Viro: mnt_list init
- Jeff Garzik: network driver update (license tags, tulip driver)
- David Miller: sparc, net updates
- Ben Collins: firewire update
- Gerd Knorr: btaudio/bttv update
- Tim Hockin: MD cleanups
- Greg KH, Petko Manolov: USB updates
- Leonard Zubkoff: DAC960 driver update
|
|
- Tim Hockin: NatSemi ethernet update
- Kurt Garloff: make PS/2 mouse reconnect adjustable like 2.2.x
- Daniel Phillips: unlazy use-once
- David Miller: undo poll() limit braindamage
- me: make return value from do_try_to_free_pages() meaningful
|
|
- Dan Quinlan: cramfs update
- Ben Collins: IEEE 1394 update
- David Miller: network update (pppoe, routing cache stats), sparc32 update
- me: only dump core once per threaded app (first one wins)
- me: use new completion handlers for block device requests (same race
as with vfork, see -pre7)
|
|
- Mike Phillips: olympic driver update
- Alan Cox: continued resyncing (lots of small stuff, big NTFS merge from Anton)
- Martin Dalecki: cleanup (remove unused and unnecessary get_hardblocksize)
- Chris Mason: fix potential reiserfs journal overflow
- Jeff Garzik: network driver updates
- David Miller: sparc fixes, some network cleanups
|
|
- Paul Mackerras: PPC update for thread-safe page table handling
- Ingo Molnar: x86 PAE update for thread-safe page table handling
- Jeff Garzik: network driver updates, i810 rng driver, and
"alloc_etherdev()" network driver insert race condition fix.
- David Miller: UltraSparcIII update, network locking fixes
- Al Viro: fix fs counts on mount failure
|
|
|
