summaryrefslogtreecommitdiff
path: root/include/linux/mlx5
AgeCommit message (Collapse)Author
2023-05-30net/mlx5: DR, Check force-loopback RC QP capability independently from RoCEYevgeny Kliteynik
commit c7dd225bc224726c22db08e680bf787f60ebdee3 upstream. SW Steering uses RC QP for writing STEs to ICM. This writingis done in LB (loopback), and FL (force-loopback) QP is preferred for performance. FL is available when RoCE is enabled or disabled based on RoCE caps. This patch adds reading of FL capability from HCA caps in addition to the existing reading from RoCE caps, thus fixing the case where we didn't have loopback enabled when RoCE was disabled. Fixes: 7304d603a57a ("net/mlx5: DR, Add support for force-loopback QP") Signed-off-by: Itamar Gozlan <igozlan@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-11RDMA/mlx5: Fix flow counter query via DEVXMark Bloch
[ Upstream commit 3e358ea8614ddfbc59ca7a3f5dff5dde2b350b2c ] Commit cited in "fixes" tag added bulk support for flow counters but it didn't account that's also possible to query a counter using a non-base id if the counter was allocated as bulk. When a user performs a query, validate the flow counter id given in the mailbox is inside the valid range taking bulk value into account. Fixes: 208d70f562e5 ("IB/mlx5: Support flow counters offset for bulk counters") Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Link: https://lore.kernel.org/r/79d7fbe291690128e44672418934256254d93115.1681377114.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-12net/mlx5: E-Switch, properly handle ingress tagged packets on VSTMoshe Shemesh
[ Upstream commit 1f0ae22ab470946143485a02cc1cd7e05c0f9120 ] Fix SRIOV VST mode behavior to insert cvlan when a guest tag is already present in the frame. Previous VST mode behavior was to drop packets or override existing tag, depending on the device version. In this patch we fix this behavior by correctly building the HW steering rule with a push vlan action, or for older devices we ask the FW to stack the vlan when a vlan is already present. Fixes: 07bab9502641 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes") Fixes: dfcb1ed3c331 ("net/mlx5: E-Switch, Vport ingress/egress ACLs rules for VST mode") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net/mlx5: Fix possible use-after-free in async command interfaceTariq Toukan
[ Upstream commit bacd22df95147ed673bec4692ab2d4d585935241 ] mlx5_cmd_cleanup_async_ctx should return only after all its callback handlers were completed. Before this patch, the below race between mlx5_cmd_cleanup_async_ctx and mlx5_cmd_exec_cb_handler was possible and lead to a use-after-free: 1. mlx5_cmd_cleanup_async_ctx is called while num_inflight is 2 (i.e. elevated by 1, a single inflight callback). 2. mlx5_cmd_cleanup_async_ctx decreases num_inflight to 1. 3. mlx5_cmd_exec_cb_handler is called, decreases num_inflight to 0 and is about to call wake_up(). 4. mlx5_cmd_cleanup_async_ctx calls wait_event, which returns immediately as the condition (num_inflight == 0) holds. 5. mlx5_cmd_cleanup_async_ctx returns. 6. The caller of mlx5_cmd_cleanup_async_ctx frees the mlx5_async_ctx object. 7. mlx5_cmd_exec_cb_handler goes on and calls wake_up() on the freed object. Fix it by syncing using a completion object. Mark it completed when num_inflight reaches 0. Trace: BUG: KASAN: use-after-free in do_raw_spin_lock+0x23d/0x270 Read of size 4 at addr ffff888139cd12f4 by task swapper/5/0 CPU: 5 PID: 0 Comm: swapper/5 Not tainted 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x57/0x7d print_report.cold+0x2d5/0x684 ? do_raw_spin_lock+0x23d/0x270 kasan_report+0xb1/0x1a0 ? do_raw_spin_lock+0x23d/0x270 do_raw_spin_lock+0x23d/0x270 ? rwlock_bug.part.0+0x90/0x90 ? __delete_object+0xb8/0x100 ? lock_downgrade+0x6e0/0x6e0 _raw_spin_lock_irqsave+0x43/0x60 ? __wake_up_common_lock+0xb9/0x140 __wake_up_common_lock+0xb9/0x140 ? __wake_up_common+0x650/0x650 ? destroy_tis_callback+0x53/0x70 [mlx5_core] ? kasan_set_track+0x21/0x30 ? destroy_tis_callback+0x53/0x70 [mlx5_core] ? kfree+0x1ba/0x520 ? do_raw_spin_unlock+0x54/0x220 mlx5_cmd_exec_cb_handler+0x136/0x1a0 [mlx5_core] ? mlx5_cmd_cleanup_async_ctx+0x220/0x220 [mlx5_core] ? mlx5_cmd_cleanup_async_ctx+0x220/0x220 [mlx5_core] mlx5_cmd_comp_handler+0x65a/0x12b0 [mlx5_core] ? dump_command+0xcc0/0xcc0 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 ? cmd_comp_notifier+0x7e/0xb0 [mlx5_core] cmd_comp_notifier+0x7e/0xb0 [mlx5_core] atomic_notifier_call_chain+0xd7/0x1d0 mlx5_eq_async_int+0x3ce/0xa20 [mlx5_core] atomic_notifier_call_chain+0xd7/0x1d0 ? irq_release+0x140/0x140 [mlx5_core] irq_int_handler+0x19/0x30 [mlx5_core] __handle_irq_event_percpu+0x1f2/0x620 handle_irq_event+0xb2/0x1d0 handle_edge_irq+0x21e/0xb00 __common_interrupt+0x79/0x1a0 common_interrupt+0x78/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:default_idle+0x42/0x60 Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 0f b6 14 11 38 d0 7c 04 84 d2 75 14 8b 05 eb 47 22 02 85 c0 7e 07 0f 00 2d e0 9f 48 00 fb f4 <c3> 48 c7 c7 80 08 7f 85 e8 d1 d3 3e fe eb de 66 66 2e 0f 1f 84 00 RSP: 0018:ffff888100dbfdf0 EFLAGS: 00000242 RAX: 0000000000000001 RBX: ffffffff84ecbd48 RCX: 1ffffffff0afe110 RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff835cc9bc RBP: 0000000000000005 R08: 0000000000000001 R09: ffff88881dec4ac3 R10: ffffed1103bd8958 R11: 0000017d0ca571c9 R12: 0000000000000005 R13: ffffffff84f024e0 R14: 0000000000000000 R15: dffffc0000000000 ? default_idle_call+0xcc/0x450 default_idle_call+0xec/0x450 do_idle+0x394/0x450 ? arch_cpu_idle_exit+0x40/0x40 ? do_idle+0x17/0x450 cpu_startup_entry+0x19/0x20 start_secondary+0x221/0x2b0 ? set_cpu_sibling_map+0x2070/0x2070 secondary_startup_64_no_verify+0xcd/0xdb </TASK> Allocated by task 49502: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 kvmalloc_node+0x48/0xe0 mlx5e_bulk_async_init+0x35/0x110 [mlx5_core] mlx5e_tls_priv_tx_list_cleanup+0x84/0x3e0 [mlx5_core] mlx5e_ktls_cleanup_tx+0x38f/0x760 [mlx5_core] mlx5e_cleanup_nic_tx+0xa7/0x100 [mlx5_core] mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core] mlx5e_suspend+0xdb/0x140 [mlx5_core] mlx5e_remove+0x89/0x190 [mlx5_core] auxiliary_bus_remove+0x52/0x70 device_release_driver_internal+0x40f/0x650 driver_detach+0xc1/0x180 bus_remove_driver+0x125/0x2f0 auxiliary_driver_unregister+0x16/0x50 mlx5e_cleanup+0x26/0x30 [mlx5_core] cleanup+0xc/0x4e [mlx5_core] __x64_sys_delete_module+0x2b5/0x450 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 49502: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 ____kasan_slab_free+0x11d/0x1b0 kfree+0x1ba/0x520 mlx5e_tls_priv_tx_list_cleanup+0x2e7/0x3e0 [mlx5_core] mlx5e_ktls_cleanup_tx+0x38f/0x760 [mlx5_core] mlx5e_cleanup_nic_tx+0xa7/0x100 [mlx5_core] mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core] mlx5e_suspend+0xdb/0x140 [mlx5_core] mlx5e_remove+0x89/0x190 [mlx5_core] auxiliary_bus_remove+0x52/0x70 device_release_driver_internal+0x40f/0x650 driver_detach+0xc1/0x180 bus_remove_driver+0x125/0x2f0 auxiliary_driver_unregister+0x16/0x50 mlx5e_cleanup+0x26/0x30 [mlx5_core] cleanup+0xc/0x4e [mlx5_core] __x64_sys_delete_module+0x2b5/0x450 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: e355477ed9e4 ("net/mlx5: Make mlx5_cmd_exec_cb() a safe API") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-8-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-31net/mlx5: Avoid false positive lockdep warning by adding lock_class_keyMoshe Shemesh
[ Upstream commit d59b73a66e5e0682442b6d7b4965364e57078b80 ] Add a lock_class_key per mlx5 device to avoid a false positive "possible circular locking dependency" warning by lockdep, on flows which lock more than one mlx5 device, such as adding SF. kernel log: ====================================================== WARNING: possible circular locking dependency detected 5.19.0-rc8+ #2 Not tainted ------------------------------------------------------ kworker/u20:0/8 is trying to acquire lock: ffff88812dfe0d98 (&dev->intf_state_mutex){+.+.}-{3:3}, at: mlx5_init_one+0x2e/0x490 [mlx5_core] but task is already holding lock: ffff888101aa7898 (&(&notifier->n_head)->rwsem){++++}-{3:3}, at: blocking_notifier_call_chain+0x5a/0x130 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&(&notifier->n_head)->rwsem){++++}-{3:3}: down_write+0x90/0x150 blocking_notifier_chain_register+0x53/0xa0 mlx5_sf_table_init+0x369/0x4a0 [mlx5_core] mlx5_init_one+0x261/0x490 [mlx5_core] probe_one+0x430/0x680 [mlx5_core] local_pci_probe+0xd6/0x170 work_for_cpu_fn+0x4e/0xa0 process_one_work+0x7c2/0x1340 worker_thread+0x6f6/0xec0 kthread+0x28f/0x330 ret_from_fork+0x1f/0x30 -> #0 (&dev->intf_state_mutex){+.+.}-{3:3}: __lock_acquire+0x2fc7/0x6720 lock_acquire+0x1c1/0x550 __mutex_lock+0x12c/0x14b0 mlx5_init_one+0x2e/0x490 [mlx5_core] mlx5_sf_dev_probe+0x29c/0x370 [mlx5_core] auxiliary_bus_probe+0x9d/0xe0 really_probe+0x1e0/0xaa0 __driver_probe_device+0x219/0x480 driver_probe_device+0x49/0x130 __device_attach_driver+0x1b8/0x280 bus_for_each_drv+0x123/0x1a0 __device_attach+0x1a3/0x460 bus_probe_device+0x1a2/0x260 device_add+0x9b1/0x1b40 __auxiliary_device_add+0x88/0xc0 mlx5_sf_dev_state_change_handler+0x67e/0x9d0 [mlx5_core] blocking_notifier_call_chain+0xd5/0x130 mlx5_vhca_state_work_handler+0x2b0/0x3f0 [mlx5_core] process_one_work+0x7c2/0x1340 worker_thread+0x59d/0xec0 kthread+0x28f/0x330 ret_from_fork+0x1f/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&notifier->n_head)->rwsem); lock(&dev->intf_state_mutex); lock(&(&notifier->n_head)->rwsem); lock(&dev->intf_state_mutex); *** DEADLOCK *** 4 locks held by kworker/u20:0/8: #0: ffff888150612938 ((wq_completion)mlx5_events){+.+.}-{0:0}, at: process_one_work+0x6e2/0x1340 #1: ffff888100cafdb8 ((work_completion)(&work->work)#3){+.+.}-{0:0}, at: process_one_work+0x70f/0x1340 #2: ffff888101aa7898 (&(&notifier->n_head)->rwsem){++++}-{3:3}, at: blocking_notifier_call_chain+0x5a/0x130 #3: ffff88813682d0e8 (&dev->mutex){....}-{3:3}, at:__device_attach+0x76/0x460 stack backtrace: CPU: 6 PID: 8 Comm: kworker/u20:0 Not tainted 5.19.0-rc8+ Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_events mlx5_vhca_state_work_handler [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x57/0x7d check_noncircular+0x278/0x300 ? print_circular_bug+0x460/0x460 ? lock_chain_count+0x20/0x20 ? register_lock_class+0x1880/0x1880 __lock_acquire+0x2fc7/0x6720 ? register_lock_class+0x1880/0x1880 ? register_lock_class+0x1880/0x1880 lock_acquire+0x1c1/0x550 ? mlx5_init_one+0x2e/0x490 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 __mutex_lock+0x12c/0x14b0 ? mlx5_init_one+0x2e/0x490 [mlx5_core] ? mlx5_init_one+0x2e/0x490 [mlx5_core] ? _raw_read_unlock+0x1f/0x30 ? mutex_lock_io_nested+0x1320/0x1320 ? __ioremap_caller.constprop.0+0x306/0x490 ? mlx5_sf_dev_probe+0x269/0x370 [mlx5_core] ? iounmap+0x160/0x160 mlx5_init_one+0x2e/0x490 [mlx5_core] mlx5_sf_dev_probe+0x29c/0x370 [mlx5_core] ? mlx5_sf_dev_remove+0x130/0x130 [mlx5_core] auxiliary_bus_probe+0x9d/0xe0 really_probe+0x1e0/0xaa0 __driver_probe_device+0x219/0x480 ? auxiliary_match_id+0xe9/0x140 driver_probe_device+0x49/0x130 __device_attach_driver+0x1b8/0x280 ? driver_allows_async_probing+0x140/0x140 bus_for_each_drv+0x123/0x1a0 ? bus_for_each_dev+0x1a0/0x1a0 ? lockdep_hardirqs_on_prepare+0x286/0x400 ? trace_hardirqs_on+0x2d/0x100 __device_attach+0x1a3/0x460 ? device_driver_attach+0x1e0/0x1e0 ? kobject_uevent_env+0x22d/0xf10 bus_probe_device+0x1a2/0x260 device_add+0x9b1/0x1b40 ? dev_set_name+0xab/0xe0 ? __fw_devlink_link_to_suppliers+0x260/0x260 ? memset+0x20/0x40 ? lockdep_init_map_type+0x21a/0x7d0 __auxiliary_device_add+0x88/0xc0 ? auxiliary_device_init+0x86/0xa0 mlx5_sf_dev_state_change_handler+0x67e/0x9d0 [mlx5_core] blocking_notifier_call_chain+0xd5/0x130 mlx5_vhca_state_work_handler+0x2b0/0x3f0 [mlx5_core] ? mlx5_vhca_event_arm+0x100/0x100 [mlx5_core] ? lock_downgrade+0x6e0/0x6e0 ? lockdep_hardirqs_on_prepare+0x286/0x400 process_one_work+0x7c2/0x1340 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? pwq_dec_nr_in_flight+0x230/0x230 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x59d/0xec0 ? process_one_work+0x1340/0x1340 kthread+0x28f/0x330 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Fixes: 6a3273217469 ("net/mlx5: SF, Port function state change support") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14net/mlx5: correct ECE offset in query qp outputChangcheng Liu
[ Upstream commit 3fc2a9e89b3508a5cc0c324f26d7b4740ba8c456 ] ECE field should be after opt_param_mask in query qp output. Fixes: 6b646a7e4af6 ("net/mlx5: Add ability to read and write ECE options") Signed-off-by: Changcheng Liu <jerrliu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-16net/mlx5: Fix size field in bufferx_reg structMohammad Kabat
[ Upstream commit ac77998b7ac3044f0509b097da9637184598980d ] According to HW spec the field "size" should be 16 bits in bufferx register. Fixes: e281682bf294 ("net/mlx5_core: HW data structs/types definitions cleanup") Signed-off-by: Mohammad Kabat <mohammadkab@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08net/mlx5e: Rename TIR lro functions to TIR packet merge functionsKhalid Manaa
[ Upstream commit eaee12f046924eeb1210c7e4f3b326603ff1bd85 ] This series introduces new packet merge type, therefore rename lro functions to packet merge to support the new merge type: - Generalize + rename mlx5e_build_tir_ctx_lro to mlx5e_build_tir_ctx_packet_merge. - Rename mlx5e_modify_tirs_lro to mlx5e_modify_tirs_packet_merge. - Rename lro bit in mlx5_ifc_modify_tir_bitmask_bits to packet_merge. - Rename lro_en in mlx5e_params to packet_merge_type type and combine packet_merge params into one struct mlx5e_packet_merge_param. Signed-off-by: Khalid Manaa <khalidm@nvidia.com> Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08net/mlx5e: Rename lro_timeout to packet_merge_timeoutBen Ben-Ishay
[ Upstream commit 50f477fe9933193e960785f1192be801d7cd307a ] TIR stands for transport interface receive, the TIR object is responsible for performing all transport related operations on the receive side like packet processing, demultiplexing the packets to different RQ's, etc. lro_timeout is a field in the TIR that is used to set the timeout for lro session, this series introduces new packet merge type, therefore rename lro_timeout to packet_merge_timeout for all packet merge types. Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25net/mlx5: E-Switch, Fix resetting of encap mode when entering switchdevPaul Blakey
[ Upstream commit d7751d6476185ff754b9dad2cba0c0a6e43ecadc ] E-Switch encap mode is relevant only when in switchdev mode. The RDMA driver can query the encap configuration via mlx5_eswitch_get_encap_mode(). Make sure it returns the currently used mode and not the set one. This reverts the cited commit which reset the encap mode on entering switchdev and fixes the original issue properly. Fixes: 9a64144d683a ("net/mlx5: E-Switch, Fix default encap mode") Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-20net/mlx5: Lag, change multipath and bonding to be mutually exclusiveMaor Dickman
Both multipath and bonding events are changing the HW LAG state independently. Handling one of the features events while the other is already enabled can cause unwanted behavior, for example handling bonding event while multipath enabled will disable the lag and cause multipath to stop working. Fix it by ignoring bonding event while in multipath and ignoring FIB events while in bonding mode. Fixes: 544fe7c2e654 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-12net/mlx5e: Mutually exclude RX-FCS and RX-port-timestampAya Levin
Due to current HW arch limitations, RX-FCS (scattering FCS frame field to software) and RX-port-timestamp (improved timestamp accuracy on the receive side) can't work together. RX-port-timestamp is not controlled by the user and it is enabled by default when supported by the HW/FW. This patch sets RX-port-timestamp opposite to RX-FCS configuration. Fixes: 102722fc6832 ("net/mlx5e: Add support for RXFCS feature flag") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-19net/mlx5: E-switch, Introduce rate limiting groups APIDmytro Linkin
Extend eswitch API with rate limiting groups: - Define new struct mlx5_esw_rate_group that is used to hold all internal group data. - Implement functions that allow creation, destruction and cleanup of groups. - Assign all vports to internal unlimited zero group by default. This commit lays the groundwork for group rate limiting by implementing devlink_ops->rate_node_{new|del}() callbacks to support creating and deleting groups through devlink rate node objects. APIs that allows setting rates and adding/removing members are implemented in following patches. Co-developed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Huy Nguyen <huyn@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/ptp/Kconfig: 55c8fca1dae1 ("ptp_pch: Restore dependency on PCI") e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-16Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio fixes from Michael Tsirkin: "Fixes in virtio, vhost, and vdpa drivers" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa/mlx5: Fix queue type selection logic vdpa/mlx5: Avoid destroying MR on empty iotlb tools/virtio: fix build virtio_ring: pull in spinlock header vringh: pull in spinlock header virtio-blk: Add validation for block size in config space vringh: Use wiov->used to check for read/write desc order virtio_vdpa: reject invalid vq indices vdpa: Add documentation for vdpa_alloc_device() macro vDPA/ifcvf: Fix return value check for vdpa_alloc_device() vp_vdpa: Fix return value check for vdpa_alloc_device() vdpa_sim: Fix return value check for vdpa_alloc_device() vhost: Fix the calculation in vhost_overflow() vhost-vdpa: Fix integer overflow in vhost_vdpa_process_iotlb_update() virtio_pci: Support surprise removal of virtio pci device virtio: Protect vqs list access virtio: Keep vring_del_virtqueue() mirror of VQ create virtio: Improve vq->broken access to avoid any compiler optimization
2021-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h 9e26680733d5 ("bnxt_en: Update firmware call to retrieve TX PTP timestamp") 9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins") 099fdeda659d ("bnxt_en: Event handler for PPS events") kernel/bpf/helpers.c include/linux/bpf-cgroup.h a2baf4e8bb0f ("bpf: Fix potentially incorrect results with bpf_get_local_storage()") c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current") drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c 5957cc557dc5 ("net/mlx5: Set all field of mlx5_irq before inserting it to the xarray") 2d0b41a37679 ("net/mlx5: Refcount mlx5_irq with integer") MAINTAINERS 7b637cd52f02 ("MAINTAINERS: fix Microchip CAN BUS Analyzer Tool entry typo") 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-11net/mlx5: Allocate individual capabilityParav Pandit
Currently mlx5_core_dev contains array of capabilities. It contains 19 valid capabilities of the device, 2 reserved entries and 12 holes. Due to this for 14 unused entries, mlx5_core_dev allocates 14 * 8K = 112K bytes of memory which is never used. Due to this mlx5_core_dev structure size is 270Kbytes odd. This allocation further aligns to next power of 2 to 512Kbytes. By skipping non-existent entries, (a) 112Kbyte is saved, (b) mlx5_core_dev reduces to 8KB with alignment (c) 350KB saved in alignment In future individual capability allocation can be used to skip its allocation when such capability is disabled at the device level. This patch prepares mlx5_core_dev to hold capability using a pointer instead of inline array. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-11net/mlx5: Reorganize current and maximal capabilities to be per-typeParav Pandit
In the current code, the current and maximal capabilities are maintained in separate arrays which are both per type. In order to allow the creation of such a basic structure as a dynamically allocated array, we move curr and max fields to a unified structure so that specific capabilities can be allocated as one unit. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-11net/mlx5: Delete impossible dev->state checksLeon Romanovsky
New mlx5_core device structure is allocated through devlink_alloc with\ kzalloc and that ensures that all fields are equal to zero and it includes ->state too. That means that checks of that field in the mlx5_init_one() is completely redundant, because that function is called only once in the begging of mlx5_core_dev lifetime. PCI: .probe() -> probe_one() -> mlx5_init_one() The recovery flow can't run at that time or before it, because relevant work initialized later in mlx5_init_once(). Such initialization flow ensures that dev->state can't be MLX5_DEVICE_STATE_UNINITIALIZED at all, so remove such impossible checks. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-11net/mlx5: Fix typo in commentsCai Huoqing
Fix typo: *vectores ==> vectors *realeased ==> released *erros ==> errors *namepsace ==> namespace *trafic ==> traffic *proccessed ==> processed *retore ==> restore *Currenlty ==> Currently *crated ==> created *chane ==> change *cannnot ==> cannot *usuallly ==> usually *failes ==> fails *importent ==> important *reenabled ==> re-enabled *alocation ==> allocation *recived ==> received *tanslation ==> translation Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-11vdpa/mlx5: Fix queue type selection logicEli Cohen
get_queue_type() comments that splict virtqueue is preferred, however, the actual logic preferred packed virtqueues. Since firmware has not supported packed virtqueues we ended up using split virtqueues as was desired. Since we do not advertise support for packed virtqueues, we add a check to verify split virtqueues are indeed supported. Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210811053759.66752-1-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-08-10Merge branch 'mlx5-next' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Saeed Mahameed says: ==================== pull-request: mlx5-next 2020-08-9 This pulls mlx5-next branch which includes patches already reviewed on net-next and rdma mailing lists. 1) mlx5 single E-Switch FDB for lag 2) IB/mlx5: Rename is_apu_thread_cq function to is_apu_cq 3) Add DCS caps & fields support [1] https://patchwork.kernel.org/project/netdevbpf/cover/20210803231959.26513-1-saeed@kernel.org/ [2] https://patchwork.kernel.org/project/netdevbpf/patch/0e3364dab7e0e4eea5423878b01aa42470be8d36.1626609184.git.leonro@nvidia.com/ [3] https://patchwork.kernel.org/project/netdevbpf/patch/55e1d69bef1fbfa5cf195c0bfcbe35c8019de35e.1624258894.git.leonro@nvidia.com/ * 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: net/mlx5: Lag, Create shared FDB when in switchdev mode net/mlx5: E-Switch, add logic to enable shared FDB net/mlx5: Lag, move lag destruction to a workqueue net/mlx5: Lag, properly lock eswitch if needed net/mlx5: Add send to vport rules on paired device net/mlx5: E-Switch, Add event callback for representors net/mlx5e: Use shared mappings for restoring from metadata net/mlx5e: Add an option to create a shared mapping net/mlx5: E-Switch, set flow source for send to uplink rule RDMA/mlx5: Add shared FDB support {net, RDMA}/mlx5: Extend send to vport rules RDMA/mlx5: Fill port info based on the relevant eswitch net/mlx5: Lag, add initial logic for shared FDB net/mlx5: Return mdev from eswitch IB/mlx5: Rename is_apu_thread_cq function to is_apu_cq net/mlx5: Add DCS caps & fields support ==================== Link: https://lore.kernel.org/r/20210809202522.316930-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-09net/mlx5: Synchronize correct IRQ when destroying CQShay Drory
The CQ destroy is performed based on the IRQ number that is stored in cq->irqn. That number wasn't set explicitly during CQ creation and as expected some of the API users of mlx5_core_create_cq() forgot to update it. This caused to wrong synchronization call of the wrong IRQ with a number 0 instead of the real one. As a fix, set the IRQ number directly in the mlx5_core_create_cq() and update all users accordingly. Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Fixes: ef1659ade359 ("IB/mlx5: Add DEVX support for CQ events") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-05net/mlx5: E-Switch, Add event callback for representorsMark Bloch
This callback will allow to notify representors about relevant events when in OFFLOADS mode. In downstream patches, this will be used to notify about PAIR/UNPAIR devcom events. Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-05{net, RDMA}/mlx5: Extend send to vport rulesMark Bloch
In shared FDB there is only one eswitch which is active and it receives traffic from all representors and all vports in the HCA. While the Ethernet representor will always reside on its native PF the IB representor will not. Extend send to vport rule creation to support such flows. Need to account for source vport that sends the traffic (on which the representors resides) and the target eswitch the traffic which reach. Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-05net/mlx5: Lag, add initial logic for shared FDBMark Bloch
As shared FDB requires changes in two subsystems first expose the needed core functions so the RDMA side can be changed. mlx5_lag_is_master(): return true if a given mlx5 device is the lag master. mlx5_lag_is_shared_fdb(): Returns true if the lag mode is shared FDB. mlx5_lag_get_peer_mdev(): Return the peer mdev in lag. The mentioned functions will be used by downstream patches in order to add support for shared FDB for the RDMA side. Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-05net/mlx5: Return mdev from eswitchMark Bloch
Export a function so users can retrieve the mellanox device that manages the eswitch from the eswitch device. Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-02net/mlx5: Move TTC logic to fs_ttcMaor Gottlieb
Now that TTC logic is not dependent on mlx5e structs, move it to lib/fs_ttc.c so it could be used other part of the mlx5 driver. Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-07-26net/mlx5e: Block LRO if firmware asks for tunneled LROMaxim Mikityanskiy
This commit does a cleanup in LRO configuration. LRO is a parameter of an RQ, but its state is changed by modifying a TIR related to the RQ. The current status: LRO for tunneled packets is not supported in the driver, inner TIRs may enable LRO on creation, but LRO status of inner TIRs isn't changed in mlx5e_modify_tirs_lro(). This is inconsistent, but as long as the firmware doesn't declare support for tunneled LRO, it works, because the same RQs are shared between the inner and outer TIRs. This commit does two fixes: 1. If the firmware has the tunneled LRO capability, LRO is blocked altogether, because it's not possible to block it for inner TIRs only, when the same RQs are shared between inner and outer TIRs, and the driver won't be able to handle tunneled LRO traffic. 2. mlx5e_modify_tirs_lro() is patched to modify LRO state for all TIRs, including inner ones, because all TIRs related to an RQ should agree on their LRO state. Fixes: 7b3722fa9ef6 ("net/mlx5e: Support RSS for GRE tunneled packets") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-07-25IB/mlx5: Rename is_apu_thread_cq function to is_apu_cqTal Gilboa
is_apu_thread_cq() used to detect CQs which are attached to APU threads. This was extended to support other elements as well, so the function was renamed to is_apu_cq(). c_eqn_or_apu_element was extended from 8 bits to 32 bits, which wan't reflected when the APU support was first introduced. Acked-by: Michael S. Tsirkin <mst@redhat.com> # vdpa Signed-off-by: Tal Gilboa <talgi@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2021-07-18net/mlx5: Add DCS caps & fields supportLior Nahmanson
This fields will be needed when adding a support for DCS offload max_dci_stream_channels - maximum DCI stream channels supported per DCI. max_dci_errored_streams - maximum DCI error stream channels supported per DCI before a DCI move to error state. Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2021-07-03vdpa/mlx5: Support creating resources with uid == 0Eli Cohen
Currently all resources must be created with uid != 0 which is essential when userspace processes are allocating virtquueue resources. Since this is a kernel implementation, it is perfectly legal to open resources with uid == 0. In case firmware supports, avoid allocating user context. Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210531160404.31368-1-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2021-07-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "This contains a replacement driver for Intel iWarp hardware. This new driver supports the old ethernet hardware and also newer chips that can do ROCE. Other than that, this contains the typical mix of patches: - Driver updates and cleanups for bnxt_re, cxgb4, mlx4, and mlx5 - Many static checker driven code clean ups, including a wide refcount_t conversion - Several series for the hns driver, more HIP09 HW capabilities, migration to new HW register manipulators, and code cleanups - Minor fixes and improvements in srp, rts, and cm - Improvements throughout for sysfs related code to use DEVICE_ATTR_*, make the ib_port sysfs first-class, and overall use sysfs APIs properly - Intel's new irdma driver replacing i40iw - rxe general clean ups and Memory Window support" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (211 commits) RDMA/core: Always release restrack object RDMA/mlx5: Don't access NULL-cleared mpi pointer RDMA/irdma: Fix potential overflow expression in irdma_prm_get_pbles RDMA/irdma: Check contents of user-space irdma_mem_reg_req object RDMA/rxe: Missing unlock on error in get_srq_wqe() RDMA/cma: Fix rdma_resolve_route() memory leak RDMA/core/sa_query: Remove unused argument RDMA/cma: Fix incorrect Packet Lifetime calculation RDMA/cma: Protect RMW with qp_mutex RDMA/cma: Remove unnecessary INIT->INIT transition RDMA/hns: Add window selection field of congestion control RDMA/hfi1: Remove use of kmap() RDMA/irdma: Remove use of kmap() RDMA/bnxt_re: Fix uninitialized struct bit field rsvd1 IB/isert: Align target max I/O size to initiator size RDMA/hns: Fix incorrect vlan enable bit in QPC MAINTAINERS: Update Broadcom RDMA maintainers RDMA/irdma: Use the queried port attributes RDMA/rxe: Fix redundant skb_put_zero RDMA/rxe: Fix extra copy in prepare_ack_packet ...
2021-06-26net/mlx5: DR, Add support for flow sampler offloadYevgeny Kliteynik
Add SW steering support for sFlow / flow sampler action. Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-22Merge branch 'mlx5_realtime_ts' into rdma.git for-nextJason Gunthorpe
Aharon Landau says: ==================== In case device supports only real-time timestamp, the kernel will fail to create QP despite rdma-core requested such timestamp type. It is because device returns free-running timestamp, and the conversion from free-running to real-time is performed in the user space. This series fixes it, by returning real-time timestamp. ==================== * mlx5_realtime_ts: RDMA/mlx5: Support real-time timestamp directly from the device RDMA/mlx5: Refactor get_ts_format functions to simplify code Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-22RDMA/mlx5: Refactor get_ts_format functions to simplify codeAharon Landau
QPC, SQC and RQC timestamp formats and capabilities are always equal because they represent general hardware support. So instead of code duplication, let's merge them into general enum and logic. Signed-off-by: Aharon Landau <aharonl@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2021-06-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Trivial conflicts in net/can/isotp.c and tools/testing/selftests/net/mptcp/mptcp_connect.sh scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c to include/linux/ptp_clock_kernel.h in -next so re-apply the fix there. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-16net/mlx5e: Don't create devices during unload flowDmytro Linkin
Running devlink reload command for port in switchdev mode cause resources to corrupt: driver can't release allocated EQ and reclaim memory pages, because "rdma" auxiliary device had add CQs which blocks EQ from deletion. Erroneous sequence happens during reload-down phase, and is following: 1. detach device - suspends auxiliary devices which support it, destroys others. During this step "eth-rep" and "rdma-rep" are destroyed, "eth" - suspended. 2. disable SRIOV - moves device to legacy mode; as part of disablement - rescans drivers. This step adds "rdma" auxiliary device. 3. destroy EQ table - <failure>. Driver shouldn't create any device during unload flows. To handle that implement MLX5_PRIV_FLAGS_DETACH flag, set it on device detach and unset on device attach. If flag is set do no-op on drivers rescan. Fixes: a925b5e309c9 ("net/mlx5: Register mlx5 devices to auxiliary virtual bus") Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-14net/mlx5: Enlarge interrupt field in CREATE_EQShay Drory
FW is now supporting more than 256 MSI-X per PF (up to 2K). Hence, enlarge interrupt field in CREATE_EQ to make use of the new MSI-X's. Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-14net/mlx5: Provide cpumask at EQ creation phaseLeon Romanovsky
The users of EQ are running their code on different CPUs and with various affinity patterns. Move the cpumask setting close to their actual usage. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-09net/mlx5: Bridge, add offload infrastructureVlad Buslov
Create new files bridge.{c|h} in en/rep directory that implement bridge interaction with representor netdevices and handle required events/notifications, bridge.{c|h} in esw directory that implement all necessary eswitch offloading infrastructure and works on vport/eswitch level. Provide new kconfig MLX5_BRIDGE which is automatically selected when both kernel bridge and mlx5 eswitch configs are enabled. Provide basic infrastructure for bridge offloads: - struct mlx5_esw_bridge_offloads - per-eswitch bridge offload structure that encapsulates generic bridge-offloads data (notifier blocks, ingress flow table/group, etc.) that is created/deleted on enable/disable eswitch offloads. - struct mlx5_esw_bridge - per-bridge structure that encapsulates per-bridge data (reference counter, FDB, egress flow table/group, etc.) that is created when first eswitch represetor is attached to new bridge and deleted when last representor is removed from the bridge as a result of NETDEV_CHANGEUPPER event. The bridge tables are created with new priority FDB_BR_OFFLOAD in FDB namespace. The new priority is between tc-miss and slow path priorities. Priority consist of two levels: the ingress table that is global per eswitch and matches incoming packets by src_mac/vid and redirects them to next level (egress table) that is chosen according to ingress port bridge membership and matches on dst_mac/vid in order to redirect packet to vport according to the following diagram: + | +---------v----------+ | | | FDB_TC_OFFLOAD | | | +---------+----------+ | | +---------v----------+ | | | FDB_FT_OFFLOAD | | | +---------+----------+ | | +---------v----------+ | | | FDB_TC_MISS | | | +---------+----------+ | +--------------------------------------+ | | | | +------+ | | | | | +------v--------+ FDB_BR_OFFLOAD | | | INGRESS_TABLE | | | +------+---+----+ | | | | match | | | +---------+ | | | | | +-------+ | | +-------v-------+ match | | | | | | EGRESS_TABLE +------------> vport | | | +-------+-------+ | | | | | | | +-------+ | | miss | | | +------+------+ | | | | +--------------------------------------+ | | +---------v----------+ | | | FDB_SLOW_PATH | | | +---------+----------+ | v Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-09net/mlx5: Create TC-miss priority and tableVlad Buslov
In order to adhere to kernel software datapath model bridge offloads must come after TC and NF FDBs. Following patches in this series add new FDB priority for bridge after FDB_FT_OFFLOAD. However, since netfilter offload is implemented with unmanaged tables, its miss path is not automatically connected to next priority and requires the code to manually connect with slow table. To keep bridge offloads encapsulated and not mix it with eswitch offloads, create a new FDB_TC_MISS priority between FDB_FT_OFFLOAD and FDB_SLOW_PATH: + | +---------v----------+ | | | FDB_TC_OFFLOAD | | | +---------+----------+ | | | +---------v----------+ | | | FDB_FT_OFFLOAD | | | +---------+----------+ | | | +---------v----------+ | | | FDB_TC_MISS | | | +---------+----------+ | | | +---------v----------+ | | | FDB_SLOW_PATH | | | +---------+----------+ | v Initialize the new priority with single default empty managed table and use the table as TC/NF miss patch instead of slow table. This approach allows bridge offloads to be created as new FDB namespace priority between FDB_TC_MISS and FDB_SLOW_PATH without exposing its internal tables to any other modules since miss path of managed TC-miss table is automatically wired to next priority. Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-09net/mlx5: Added new parameters to reformat contextYevgeny Kliteynik
Adding new reformat context type (INSERT_HEADER) requires adding two new parameters to reformat context - reformat_param_0 and reformat_param_1. As defined by HW spec, these parameters have different meaning for different reformat context type. The first parameter (reformat_param_0) is not new to HW spec, but it wasn't used by any of the supported reformats. The second parameter (reformat_param_1) is new to the HW spec - it was added to allow supporting INSERT_HEADER. For NSERT_HEADER, reformat_param_0 indicates the header used to reference the location of the inserted header, and reformat_param_1 indicates the offset of the inserted header from the reference point defined by reformat_param_0. Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-09net/mlx5: mlx5_ifc support for header insert/removeYevgeny Kliteynik
Add support for HCA caps 2 that contains capabilities for the new insert/remove header actions. Added the required definitions for supporting the new reformat type: added packet reformat parameters, reformat anchors and definitions to allow copy/set into the inserted EMD (Embedded MetaData) tag. Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-09net/mlx5e: Fix page reclaim for dead peer hairpinDima Chumak
When adding a hairpin flow, a firmware-side send queue is created for the peer net device, which claims some host memory pages for its internal ring buffer. If the peer net device is removed/unbound before the hairpin flow is deleted, then the send queue is not destroyed which leads to a stack trace on pci device remove: [ 748.005230] mlx5_core 0000:08:00.2: wait_func:1094:(pid 12985): MANAGE_PAGES(0x108) timeout. Will cause a leak of a command resource [ 748.005231] mlx5_core 0000:08:00.2: reclaim_pages:514:(pid 12985): failed reclaiming pages: err -110 [ 748.001835] mlx5_core 0000:08:00.2: mlx5_reclaim_root_pages:653:(pid 12985): failed reclaiming pages (-110) for func id 0x0 [ 748.002171] ------------[ cut here ]------------ [ 748.001177] FW pages counter is 4 after reclaiming all pages [ 748.001186] WARNING: CPU: 1 PID: 12985 at drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:685 mlx5_reclaim_startup_pages+0x34b/0x460 [mlx5_core] [ +0.002771] Modules linked in: cls_flower mlx5_ib mlx5_core ptp pps_core act_mirred sch_ingress openvswitch nsh xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_umad ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay fuse [last unloaded: pps_core] [ 748.007225] CPU: 1 PID: 12985 Comm: tee Not tainted 5.12.0+ #1 [ 748.001376] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 748.002315] RIP: 0010:mlx5_reclaim_startup_pages+0x34b/0x460 [mlx5_core] [ 748.001679] Code: 28 00 00 00 0f 85 22 01 00 00 48 81 c4 b0 00 00 00 31 c0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 c7 c7 40 cc 19 a1 e8 9f 71 0e e2 <0f> 0b e9 30 ff ff ff 48 c7 c7 a0 cc 19 a1 e8 8c 71 0e e2 0f 0b e9 [ 748.003781] RSP: 0018:ffff88815220faf8 EFLAGS: 00010286 [ 748.001149] RAX: 0000000000000000 RBX: ffff8881b4900280 RCX: 0000000000000000 [ 748.001445] RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffffed102a441f51 [ 748.001614] RBP: 00000000000032b9 R08: 0000000000000001 R09: ffffed1054a15ee8 [ 748.001446] R10: ffff8882a50af73b R11: ffffed1054a15ee7 R12: fffffbfff07c1e30 [ 748.001447] R13: dffffc0000000000 R14: ffff8881b492cba8 R15: 0000000000000000 [ 748.001429] FS: 00007f58bd08b580(0000) GS:ffff8882a5080000(0000) knlGS:0000000000000000 [ 748.001695] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 748.001309] CR2: 000055a026351740 CR3: 00000001d3b48006 CR4: 0000000000370ea0 [ 748.001506] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 748.001483] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 748.001654] Call Trace: [ 748.000576] ? mlx5_satisfy_startup_pages+0x290/0x290 [mlx5_core] [ 748.001416] ? mlx5_cmd_teardown_hca+0xa2/0xd0 [mlx5_core] [ 748.001354] ? mlx5_cmd_init_hca+0x280/0x280 [mlx5_core] [ 748.001203] mlx5_function_teardown+0x30/0x60 [mlx5_core] [ 748.001275] mlx5_uninit_one+0xa7/0xc0 [mlx5_core] [ 748.001200] remove_one+0x5f/0xc0 [mlx5_core] [ 748.001075] pci_device_remove+0x9f/0x1d0 [ 748.000833] device_release_driver_internal+0x1e0/0x490 [ 748.001207] unbind_store+0x19f/0x200 [ 748.000942] ? sysfs_file_ops+0x170/0x170 [ 748.001000] kernfs_fop_write_iter+0x2bc/0x450 [ 748.000970] new_sync_write+0x373/0x610 [ 748.001124] ? new_sync_read+0x600/0x600 [ 748.001057] ? lock_acquire+0x4d6/0x700 [ 748.000908] ? lockdep_hardirqs_on_prepare+0x400/0x400 [ 748.001126] ? fd_install+0x1c9/0x4d0 [ 748.000951] vfs_write+0x4d0/0x800 [ 748.000804] ksys_write+0xf9/0x1d0 [ 748.000868] ? __x64_sys_read+0xb0/0xb0 [ 748.000811] ? filp_open+0x50/0x50 [ 748.000919] ? syscall_enter_from_user_mode+0x1d/0x50 [ 748.001223] do_syscall_64+0x3f/0x80 [ 748.000892] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 748.001026] RIP: 0033:0x7f58bcfb22f7 [ 748.000944] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [ 748.003925] RSP: 002b:00007fffd7f2aaa8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 748.001732] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f58bcfb22f7 [ 748.001426] RDX: 000000000000000d RSI: 00007fffd7f2abc0 RDI: 0000000000000003 [ 748.001746] RBP: 00007fffd7f2abc0 R08: 0000000000000000 R09: 0000000000000001 [ 748.001631] R10: 00000000000001b6 R11: 0000000000000246 R12: 000000000000000d [ 748.001537] R13: 00005597ac2c24a0 R14: 000000000000000d R15: 00007f58bd084700 [ 748.001564] irq event stamp: 0 [ 748.000787] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 748.001399] hardirqs last disabled at (0): [<ffffffff813132cf>] copy_process+0x146f/0x5eb0 [ 748.001854] softirqs last enabled at (0): [<ffffffff8131330e>] copy_process+0x14ae/0x5eb0 [ 748.013431] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 748.001492] ---[ end trace a6fabd773d1c51ae ]--- Fix by destroying the send queue of a hairpin peer net device that is being removed/unbound, which returns the allocated ring buffer pages to the host. Fixes: 4d8fcf216c90 ("net/mlx5e: Avoid unbounded peer devices when unpairing TC hairpin rules") Signed-off-by: Dima Chumak <dchumak@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-07Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Bug fixes overlapping feature additions and refactoring, mostly. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-01net/mlx5: DR, Create multi-destination flow table with level less than 64Yevgeny Kliteynik
Flow table that contains flow pointing to multiple flow tables or multiple TIRs must have a level lower than 64. In our case it applies to muli- destination flow table. Fix the level of the created table to comply with HW Spec definitions, and still make sure that its level lower than SW-owned tables, so that it would be possible to point from the multi-destination FW table to SW tables. Fixes: 34583beea4b7 ("net/mlx5: DR, Create multi-destination table for SW-steering use") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-27Merge tag 'mlx5-updates-2021-05-26' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2021-05-26 Misc update for mlx5 driver, 1) Clean up patches for lag and SF 2) Reserve bit 31 in steering register C1 for IPSec offload usage 3) Move steering tables pool logic into the steering core and increase the maximum table size to 2G entries when software steering is enabled. * tag 'mlx5-updates-2021-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Fix lag port remapping logic net/mlx5: Use boolean arithmetic to evaluate roce_lag net/mlx5: Remove unnecessary spin lock protection net/mlx5: Cap the maximum flow group size to 16M entries net/mlx5: DR, Set max table size to 2G entries net/mlx5: Move chains ft pool to be used by all firmware steering net/mlx5: Move table size calculation to steering cmd layer net/mlx5: Add case for FS_FT_NIC_TX FT in MLX5_CAP_FLOWTABLE_TYPE net/mlx5: DR, Remove unused field of send_ring struct net/mlx5e: RX, Remove unnecessary check in RX CQE compression handling net/mlx5e: IPsec/rep_tc: Fix rep_tc_update_skb drops IPsec packet net/mlx5e: TC: Reserved bit 31 of REG_C1 for IPsec offload net/mlx5e: TC: Use bit counts for register mapping net/mlx5: CT: Avoid reusing modify header context for natted entries net/mlx5e: CT, Remove newline from ct_dbg call ==================== Link: https://lore.kernel.org/r/20210527185624.694304-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27net/mlx5: Move chains ft pool to be used by all firmware steeringPaul Blakey
Firmware FT pool is per device, but the software tracking of this pool only services fs_chains users, and if another layer takes a flow table, the pool will not be updated, and fs_chains will fail creating a flow table, with no recovery till the flow table is returned. Move FT pool to be global per device, and stored at the cmd level, so all layers can use it. Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-27net/mlx5e: TC: Reserved bit 31 of REG_C1 for IPsec offloadHuy Nguyen
Currently ASAP features fully utilize all the bits of the CQE's flow tag and ft_metadata field. The flow tag field cannot be used because the flow table tagging in FTE does not allow partial write. We agree to reserve bit 31 of CQE's ft_metadata for IPsec to avoid ASAP CT from dropping IPsec offloaded packet Here is the new bit layout of REG_C1. Tunnel option id is reduced to 11 bits: < IPSEC MARKER (1) | ESW_TUN_ID(12) | ESW_TUN_OPTS(11) | ESW_ZONE_ID(8) > Signed-off-by: Huy Nguyen <huyn@nvidia.com> Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Paul Blakey <paulb@nvidia.com>
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-20 02:39:20 +0000