| Age | Commit message (Collapse) | Author |
|---|
|
Reading the LSR clears the break, parity, frame error, and overrun bits in
the 8250 chip, but these are not being saved in all places that read the
LSR. Same goes for the MSR delta bits. Save the LSR bits off whenever the
lsr is read so they can be handled later in the receive routine. Save the
MSR bits to be handled in the modem status routine.
Also, clear the stored bits and clear the interrupt registers before
enabling interrupts, to avoid handling old values of the stored bits in the
interrupt routines.
[akpm@linux-foundation.org: clean up pre-existing code]
Signed-off-by: Corey Minyard <minyard@acm.org>
Cc: Russell King <rmk+lkml@arm.linux.org.uk>
Cc: Yinghai Lu <yinghai.lu@sun.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Serial driver patch for the PMC-Sierra MSP71xx devices.
There are three different fixes:
1 Fix for DesignWare APB THRE errata: In brief, this is a non-standard
16550 in that the THRE interrupt will not re-assert itself simply by
disabling and re-enabling the THRI bit in the IER, it is only re-enabled
if a character is actually sent out.
It appears that the "8250-uart-backup-timer.patch" in the "mm" tree
also fixes it so we have dropped our initial workaround. This patch now
needs to be applied on top of that "mm" patch.
2 Fix for Busy Detect on LCR write: The DesignWare APB UART has a feature
which causes a new Busy Detect interrupt to be generated if it's busy
when the LCR is written. This fix saves the value of the LCR and
rewrites it after clearing the interrupt.
3 Workaround for interrupt/data concurrency issue: The SoC needs to
ensure that writes that can cause interrupts to be cleared reach the UART
before returning from the ISR. This fix reads a non-destructive register
on the UART so the read transaction completion ensures the previously
queued write transaction has also completed.
Signed-off-by: Marc St-Jean <Marc_St-Jean@pmc-sierra.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Trivial comment fix for include/linux/serial_reg.h
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Patch from Tony Lindgren
This patch adds the missing serial port registers to build
a bootable OMAP configuration.
Signed-off-by: Tony Lindgren
Signed-off-by: Russell King
|
|
This includes a fuller definition of the 8250 and compatible bits,
and adding notes where the definition varies between different
chips.
This also fixes the following build error:
drivers/serial/8250.c:185: error: `UART_FCR_R_TRIG_10'
|
|
Patch from Deepak Saxena
Supersedes 1809/1
|
|
|
|
Patch from Holger Schurig
PXA Serial port (FFUART, BTUART, STUART) and console support
This patch works perfectly here with "console=ttyS0,115200" in the
kernel command line. It contains Jean-frederic Clere fix to detect
STUART and BTUART.
Nico said that I should post it to your patch tracker. It replaces patch 1662/1
|
|
- Al Viro: clean up driver "invalidate_device()" mess
- Andries Brouwer: make sd.c work with USB Dane-Elec CompactFlash Card
Reader
- me: fix nasty lazy kernel page table update problem
- me: undo fork changes. Too many user-level bugs and unresolved issues.
- Peter Anvin: iso9660 cleanups
- Alan Cox: big merge
- Johannes Erdfelt: UHCI pci DMA setup fix
|
|
- Alan Cox: continued merging
- Urban Widmark: smbfs fix (d_add on already hashed dentry - no-no).
- Andrew Morton: 3c59x update
- Jeff Garzik: network driver cleanups and fixes
- Gérard Roudier: sym-ncr drivers update
- Jens Axboe: more loop cleanups and fixes
- David Miller: sparc update, some networking fixes
|
|
|
