summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2016-08-22fs: limit filesystem stacking depthMiklos Szeredi
commit 69c433ed2ecd2d3264efd7afec4439524b319121 upstream. Add a simple read-only counter to super_block that indicates how deep this is in the stack of filesystems. Previously ecryptfs was the only stackable filesystem and it explicitly disallowed multiple layers of itself. Overlayfs, however, can be stacked recursively and also may be stacked on top of ecryptfs or vice versa. To limit the kernel stack usage we must limit the depth of the filesystem stack. Initially the limit is set to 2. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> [bwh: Backported to 3.2: - Drop changes to overlayfs - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-08-22etherdevice: introduce help function eth_zero_addr()Duan Jiong
commit 6d57e9078e880a3dd232d579f42ac437a8f1ef7b upstream. a lot of code has either the memset or an inefficient copy from a static array that contains the all-zeros Ethernet address. Introduce help function eth_zero_addr() to fill an address with all zeros, making the code clearer and allowing us to get rid of some constant arrays. Signed-off-by: Duan Jiong <djduanjiong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-08-22mm: Export migrate_page_move_mapping and migrate_page_copyRichard Weinberger
commit 1118dce773d84f39ebd51a9fe7261f9169cb056e upstream. Export these symbols such that UBIFS can implement ->migratepage. Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: Christoph Hellwig <hch@lst.de> [bwh: Backported to 3.2: also change migrate_page_move_mapping() from static to extern, done as part of an earlier commit upstream] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-08-22sunrpc: Update RPCBIND_MAXNETIDLENChuck Lever
commit 4b9c7f9db9a003f5c342184dc4401c1b7f2efb39 upstream. Commit 176e21ee2ec8 ("SUNRPC: Support for RPC over AF_LOCAL transports") added a 5-character netid, but did not bump RPCBIND_MAXNETIDLEN from 4 to 5. Fixes: 176e21ee2ec8 ("SUNRPC: Support for RPC over AF_LOCAL ...") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-06-15Minimal fix-up of bad hashing behavior of hash_64()Linus Torvalds
commit 689de1d6ca95b3b5bd8ee446863bf81a4883ea25 upstream. This is a fairly minimal fixup to the horribly bad behavior of hash_64() with certain input patterns. In particular, because the multiplicative value used for the 64-bit hash was intentionally bit-sparse (so that the multiply could be done with shifts and adds on architectures without hardware multipliers), some bits did not get spread out very much. In particular, certain fairly common bit ranges in the input (roughly bits 12-20: commonly with the most information in them when you hash things like byte offsets in files or memory that have block factors that mean that the low bits are often zero) would not necessarily show up much in the result. There's a bigger patch-series brewing to fix up things more completely, but this is the fairly minimal fix for the 64-bit hashing problem. It simply picks a much better constant multiplier, spreading the bits out a lot better. NOTE! For 32-bit architectures, the bad old hash_64() remains the same for now, since 64-bit multiplies are expensive. The bigger hashing cleanup will replace the 32-bit case with something better. The new constants were picked by George Spelvin who wrote that bigger cleanup series. I just picked out the constants and part of the comment from that series. Cc: George Spelvin <linux@horizon.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-06-15Make hash_64() use a 64-bit multiply when appropriateLinus Torvalds
commit 23d0db76ffa13ffb95229946e4648568c3c29db5 upstream. The hash_64() function historically does the multiply by the GOLDEN_RATIO_PRIME_64 number with explicit shifts and adds, because unlike the 32-bit case, gcc seems unable to turn the constant multiply into the more appropriate shift and adds when required. However, that means that we generate those shifts and adds even when the architecture has a fast multiplier, and could just do it better in hardware. Use the now-cleaned-up CONFIG_ARCH_HAS_FAST_MULTIPLIER (together with "is it a 64-bit architecture") to decide whether to use an integer multiply or the explicit sequence of shift/add instructions. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> [bwh: This has no immediate effect in 3.2 because nothing defines CONFIG_ARCH_HAS_FAST_MULTIPLIER. However the following fix removes that condition.]
2016-06-15mm: hugetlb: allow hugepages_supported to be architecture specificDominik Dingel
commit 2531c8cf56a640cd7d17057df8484e570716a450 upstream. s390 has a constant hugepage size, by setting HPAGE_SHIFT we also change e.g. the pageblock_order, which should be independent in respect to hugepage support. With this patch every architecture is free to define how to check for hugepage support. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-06-15hugetlb: ensure hugepage access is denied if hugepages are not supportedNishanth Aravamudan
commit 457c1b27ed56ec472d202731b12417bff023594a upstream. Currently, I am seeing the following when I `mount -t hugetlbfs /none /dev/hugetlbfs`, and then simply do a `ls /dev/hugetlbfs`. I think it's related to the fact that hugetlbfs is properly not correctly setting itself up in this state?: Unable to handle kernel paging request for data at address 0x00000031 Faulting instruction address: 0xc000000000245710 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=2048 NUMA pSeries .... In KVM guests on Power, in a guest not backed by hugepages, we see the following: AnonHugePages: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 64 kB HPAGE_SHIFT == 0 in this configuration, which indicates that hugepages are not supported at boot-time, but this is only checked in hugetlb_init(). Extract the check to a helper function, and use it in a few relevant places. This does make hugetlbfs not supported (not registered at all) in this environment. I believe this is fine, as there are no valid hugepages and that won't change at runtime. [akpm@linux-foundation.org: use pr_info(), per Mel] [akpm@linux-foundation.org: fix build when HPAGE_SHIFT is undefined] Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.2: - Drop changes to hugetlb_show_meminfo() - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-06-15USB: uas: Add a new NO_REPORT_LUNS quirkHans de Goede
commit 1363074667a6b7d0507527742ccd7bbed5e3ceaa upstream. Add a new NO_REPORT_LUNS quirk and set it for Seagate drives with an usb-id of: 0bc2:331a, as these will fail to respond to a REPORT_LUNS command. Reported-and-tested-by: David Webb <djw@noc.ac.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: - Adjust context - Drop the UAS changes] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-06-15Revert "net: validate variable length ll headers"Ben Hutchings
This reverts commit b5518429e70cd783b8ca52335456172c1a0589f6, which was commit 2793a23aacbd754dbbb5cb75093deb7e4103bace upstream. It is pointless unless af_packet calls the new function. Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-05-01net: validate variable length ll headersWillem de Bruijn
[ Upstream commit 2793a23aacbd754dbbb5cb75093deb7e4103bace ] Netdevice parameter hard_header_len is variously interpreted both as an upper and lower bound on link layer header length. The field is used as upper bound when reserving room at allocation, as lower bound when validating user input in PF_PACKET. Clarify the definition to be maximum header length. For validation of untrusted headers, add an optional validate member to header_ops. Allow bypassing of validation by passing CAP_SYS_RAWIO, for instance for deliberate testing of corrupt input. In this case, pad trailing bytes, as some device drivers expect completely initialized headers. See also http://comments.gmane.org/gmane.linux.network/401064 Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: net_device has inline comments instead of kernel-doc] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-05-01net/ipv6: add sysctl option accept_ra_min_hop_limitHangbin Liu
[ Upstream commit 8013d1d7eafb0589ca766db6b74026f76b7f5cb4 ] Commit 6fd99094de2b ("ipv6: Don't reduce hop limit for an interface") disabled accept hop limit from RA if it is smaller than the current hop limit for security stuff. But this behavior kind of break the RFC definition. RFC 4861, 6.3.4. Processing Received Router Advertisements A Router Advertisement field (e.g., Cur Hop Limit, Reachable Time, and Retrans Timer) may contain a value denoting that it is unspecified. In such cases, the parameter should be ignored and the host should continue using whatever value it is already using. If the received Cur Hop Limit value is non-zero, the host SHOULD set its CurHopLimit variable to the received value. So add sysctl option accept_ra_min_hop_limit to let user choose the minimum hop limit value they can accept from RA. And set default to 1 to meet RFC standards. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: - Adjust filename, context - Number DEVCONF enumerators explicitly to match upstream] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-05-01fs/coredump: prevent fsuid=0 dumps into user-controlled directoriesJann Horn
commit 378c6520e7d29280f400ef2ceaf155c86f05a71a upstream. This commit fixes the following security hole affecting systems where all of the following conditions are fulfilled: - The fs.suid_dumpable sysctl is set to 2. - The kernel.core_pattern sysctl's value starts with "/". (Systems where kernel.core_pattern starts with "|/" are not affected.) - Unprivileged user namespace creation is permitted. (This is true on Linux >=3.8, but some distributions disallow it by default using a distro patch.) Under these conditions, if a program executes under secure exec rules, causing it to run with the SUID_DUMP_ROOT flag, then unshares its user namespace, changes its root directory and crashes, the coredump will be written using fsuid=0 and a path derived from kernel.core_pattern - but this path is interpreted relative to the root directory of the process, allowing the attacker to control where a coredump will be written with root privileges. To fix the security issue, always interpret core_pattern for dumps that are written under SUID_DUMP_ROOT relative to the root directory of init. Signed-off-by: Jann Horn <jann@thejh.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.2: adjust filename, context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-05-01dm snapshot: disallow the COW and origin devices from being identicalDingXiang
commit 4df2bf466a9c9c92f40d27c4aa9120f4e8227bfc upstream. Otherwise loading a "snapshot" table using the same device for the origin and COW devices, e.g.: echo "0 20971520 snapshot 253:3 253:3 P 8" | dmsetup create snap will trigger: BUG: unable to handle kernel NULL pointer dereference at 0000000000000098 [ 1958.979934] IP: [<ffffffffa040efba>] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot] [ 1958.989655] PGD 0 [ 1958.991903] Oops: 0000 [#1] SMP ... [ 1959.059647] CPU: 9 PID: 3556 Comm: dmsetup Tainted: G IO 4.5.0-rc5.snitm+ #150 ... [ 1959.083517] task: ffff8800b9660c80 ti: ffff88032a954000 task.ti: ffff88032a954000 [ 1959.091865] RIP: 0010:[<ffffffffa040efba>] [<ffffffffa040efba>] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot] [ 1959.104295] RSP: 0018:ffff88032a957b30 EFLAGS: 00010246 [ 1959.110219] RAX: 0000000000000000 RBX: 0000000000000008 RCX: 0000000000000001 [ 1959.118180] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff880329334a00 [ 1959.126141] RBP: ffff88032a957b50 R08: 0000000000000000 R09: 0000000000000001 [ 1959.134102] R10: 000000000000000a R11: f000000000000000 R12: ffff880330884d80 [ 1959.142061] R13: 0000000000000008 R14: ffffc90001c13088 R15: ffff880330884d80 [ 1959.150021] FS: 00007f8926ba3840(0000) GS:ffff880333440000(0000) knlGS:0000000000000000 [ 1959.159047] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1959.165456] CR2: 0000000000000098 CR3: 000000032f48b000 CR4: 00000000000006e0 [ 1959.173415] Stack: [ 1959.175656] ffffc90001c13040 ffff880329334a00 ffff880330884ed0 ffff88032a957bdc [ 1959.183946] ffff88032a957bb8 ffffffffa040f225 ffff880329334a30 ffff880300000000 [ 1959.192233] ffffffffa04133e0 ffff880329334b30 0000000830884d58 00000000569c58cf [ 1959.200521] Call Trace: [ 1959.203248] [<ffffffffa040f225>] dm_exception_store_create+0x1d5/0x240 [dm_snapshot] [ 1959.211986] [<ffffffffa040d310>] snapshot_ctr+0x140/0x630 [dm_snapshot] [ 1959.219469] [<ffffffffa0005c44>] ? dm_split_args+0x64/0x150 [dm_mod] [ 1959.226656] [<ffffffffa0005ea7>] dm_table_add_target+0x177/0x440 [dm_mod] [ 1959.234328] [<ffffffffa0009203>] table_load+0x143/0x370 [dm_mod] [ 1959.241129] [<ffffffffa00090c0>] ? retrieve_status+0x1b0/0x1b0 [dm_mod] [ 1959.248607] [<ffffffffa0009e35>] ctl_ioctl+0x255/0x4d0 [dm_mod] [ 1959.255307] [<ffffffff813304e2>] ? memzero_explicit+0x12/0x20 [ 1959.261816] [<ffffffffa000a0c3>] dm_ctl_ioctl+0x13/0x20 [dm_mod] [ 1959.268615] [<ffffffff81215eb6>] do_vfs_ioctl+0xa6/0x5c0 [ 1959.274637] [<ffffffff81120d2f>] ? __audit_syscall_entry+0xaf/0x100 [ 1959.281726] [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70 [ 1959.288814] [<ffffffff81216449>] SyS_ioctl+0x79/0x90 [ 1959.294450] [<ffffffff8167e4ae>] entry_SYSCALL_64_fastpath+0x12/0x71 ... [ 1959.323277] RIP [<ffffffffa040efba>] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot] [ 1959.333090] RSP <ffff88032a957b30> [ 1959.336978] CR2: 0000000000000098 [ 1959.344121] ---[ end trace b049991ccad1169e ]--- Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1195899 Signed-off-by: Ding Xiang <dingxiang@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> [bwh: Backported to 3.2: the device path parsing code is rather different, but move it into dm_get_dev_t() anyway] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-05-01PCI: Disable IO/MEM decoding for devices with non-compliant BARsBjorn Helgaas
commit b84106b4e2290c081cdab521fa832596cdfea246 upstream. The PCI config header (first 64 bytes of each device's config space) is defined by the PCI spec so generic software can identify the device and manage its usage of I/O, memory, and IRQ resources. Some non-spec-compliant devices put registers other than BARs where the BARs should be. When the PCI core sizes these "BARs", the reads and writes it does may have unwanted side effects, and the "BAR" may appear to describe non-sensical address space. Add a flag bit to mark non-compliant devices so we don't touch their BARs. Turn off IO/MEM decoding to prevent the devices from consuming address space, since we can't read the BARs to find out what that address space would be. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Andi Kleen <ak@linux.intel.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-04-01include/linux/poison.h: fix LIST_POISON{1,2} offsetVasily Kulikov
commit 8a5e5e02fc83aaf67053ab53b359af08c6c49aaf upstream. Poison pointer values should be small enough to find a room in non-mmap'able/hardly-mmap'able space. E.g. on x86 "poison pointer space" is located starting from 0x0. Given unprivileged users cannot mmap anything below mmap_min_addr, it should be safe to use poison pointers lower than mmap_min_addr. The current poison pointer values of LIST_POISON{1,2} might be too big for mmap_min_addr values equal or less than 1 MB (common case, e.g. Ubuntu uses only 0x10000). There is little point to use such a big value given the "poison pointer space" below 1 MB is not yet exhausted. Changing it to a smaller value solves the problem for small mmap_min_addr setups. The values are suggested by Solar Designer: http://www.openwall.com/lists/oss-security/2015/05/02/6 Signed-off-by: Vasily Kulikov <segoon@openwall.com> Cc: Solar Designer <solar@openwall.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-04-01mld, igmp: Fix reserved tailroom calculationBenjamin Poirier
commit 1837b2e2bcd23137766555a63867e649c0b637f0 upstream. The current reserved_tailroom calculation fails to take hlen and tlen into account. skb: [__hlen__|__data____________|__tlen___|__extra__] ^ ^ head skb_end_offset In this representation, hlen + data + tlen is the size passed to alloc_skb. "extra" is the extra space made available in __alloc_skb because of rounding up by kmalloc. We can reorder the representation like so: [__hlen__|__data____________|__extra__|__tlen___] ^ ^ head skb_end_offset The maximum space available for ip headers and payload without fragmentation is min(mtu, data + extra). Therefore, reserved_tailroom = data + extra + tlen - min(mtu, data + extra) = skb_end_offset - hlen - min(mtu, skb_end_offset - hlen - tlen) = skb_tailroom - min(mtu, skb_tailroom - tlen) ; after skb_reserve(hlen) Compare the second line to the current expression: reserved_tailroom = skb_end_offset - min(mtu, skb_end_offset) and we can see that hlen and tlen are not taken into account. The min() in the third line can be expanded into: if mtu < skb_tailroom - tlen: reserved_tailroom = skb_tailroom - mtu else: reserved_tailroom = tlen Depending on hlen, tlen, mtu and the number of multicast address records, the current code may output skbs that have less tailroom than dev->needed_tailroom or it may output more skbs than needed because not all space available is used. Fixes: 4c672e4b ("ipv6: mld: fix add_grhead skb_over_panic for devs with large MTUs") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-04-01libata: Align ata_device's id on a cachelineHarvey Hunt
commit 4ee34ea3a12396f35b26d90a094c75db95080baa upstream. The id buffer in ata_device is a DMA target, but it isn't explicitly cacheline aligned. Due to this, adjacent fields can be overwritten with stale data from memory on non coherent architectures. As a result, the kernel is sometimes unable to communicate with an ATA device. Fix this by ensuring that the id buffer is cacheline aligned. This issue is similar to that fixed by Commit 84bda12af31f ("libata: align ap->sector_buf"). Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-04-01tracing: Fix freak link error caused by branch tracerArnd Bergmann
commit b33c8ff4431a343561e2319f17c14286f2aa52e2 upstream. In my randconfig tests, I came across a bug that involves several components: * gcc-4.9 through at least 5.3 * CONFIG_GCOV_PROFILE_ALL enabling -fprofile-arcs for all files * CONFIG_PROFILE_ALL_BRANCHES overriding every if() * The optimized implementation of do_div() that tries to replace a library call with an division by multiplication * code in drivers/media/dvb-frontends/zl10353.c doing u32 adc_clock = 450560; /* 45.056 MHz */ if (state->config.adc_clock) adc_clock = state->config.adc_clock; do_div(value, adc_clock); In this case, gcc fails to determine whether the divisor in do_div() is __builtin_constant_p(). In particular, it concludes that __builtin_constant_p(adc_clock) is false, while __builtin_constant_p(!!adc_clock) is true. That in turn throws off the logic in do_div() that also uses __builtin_constant_p(), and instead of picking either the constant- optimized division, and the code in ilog2() that uses __builtin_constant_p() to figure out whether it knows the answer at compile time. The result is a link error from failing to find multiple symbols that should never have been called based on the __builtin_constant_p(): dvb-frontends/zl10353.c:138: undefined reference to `____ilog2_NaN' dvb-frontends/zl10353.c:138: undefined reference to `__aeabi_uldivmod' ERROR: "____ilog2_NaN" [drivers/media/dvb-frontends/zl10353.ko] undefined! ERROR: "__aeabi_uldivmod" [drivers/media/dvb-frontends/zl10353.ko] undefined! This patch avoids the problem by changing __trace_if() to check whether the condition is known at compile-time to be nonzero, rather than checking whether it is actually a constant. I see this one link error in roughly one out of 1600 randconfig builds on ARM, and the patch fixes all known instances. Link: http://lkml.kernel.org/r/1455312410-1058841-1-git-send-email-arnd@arndb.de Acked-by: Nicolas Pitre <nico@linaro.org> Fixes: ab3c9c686e22 ("branch tracer, intel-iommu: fix build with CONFIG_BRANCH_TRACER=y") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-04-01tracepoints: Do not trace when cpu is offlineSteven Rostedt (Red Hat)
commit f37755490fe9bf76f6ba1d8c6591745d3574a6a6 upstream. The tracepoint infrastructure uses RCU sched protection to enable and disable tracepoints safely. There are some instances where tracepoints are used in infrastructure code (like kfree()) that get called after a CPU is going offline, and perhaps when it is coming back online but hasn't been registered yet. This can probuce the following warning: [ INFO: suspicious RCU usage. ] 4.4.0-00006-g0fe53e8-dirty #34 Tainted: G S ------------------------------- include/trace/events/kmem.h:141 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from offline CPU! rcu_scheduler_active = 1, debug_locks = 1 no locks held by swapper/8/0. stack backtrace: CPU: 8 PID: 0 Comm: swapper/8 Tainted: G S 4.4.0-00006-g0fe53e8-dirty #34 Call Trace: [c0000005b76c78d0] [c0000000008b9540] .dump_stack+0x98/0xd4 (unreliable) [c0000005b76c7950] [c00000000010c898] .lockdep_rcu_suspicious+0x108/0x170 [c0000005b76c79e0] [c00000000029adc0] .kfree+0x390/0x440 [c0000005b76c7a80] [c000000000055f74] .destroy_context+0x44/0x100 [c0000005b76c7b00] [c0000000000934a0] .__mmdrop+0x60/0x150 [c0000005b76c7b90] [c0000000000e3ff0] .idle_task_exit+0x130/0x140 [c0000005b76c7c20] [c000000000075804] .pseries_mach_cpu_die+0x64/0x310 [c0000005b76c7cd0] [c000000000043e7c] .cpu_die+0x3c/0x60 [c0000005b76c7d40] [c0000000000188d8] .arch_cpu_idle_dead+0x28/0x40 [c0000005b76c7db0] [c000000000101e6c] .cpu_startup_entry+0x50c/0x560 [c0000005b76c7ed0] [c000000000043bd8] .start_secondary+0x328/0x360 [c0000005b76c7f90] [c000000000008a6c] start_secondary_prolog+0x10/0x14 This warning is not a false positive either. RCU is not protecting code that is being executed while the CPU is offline. Instead of playing "whack-a-mole(TM)" and adding conditional statements to the tracepoints we find that are used in this instance, simply add a cpu_online() test to the tracepoint code where the tracepoint will be ignored if the CPU is offline. Use of raw_smp_processor_id() is fine, as there should never be a case where the tracepoint code goes from running on a CPU that is online and suddenly gets migrated to a CPU that is offline. Link: http://lkml.kernel.org/r/1455387773-4245-1-git-send-email-kda@linux-powerpc.org Reported-by: Denis Kirjanov <kda@linux-powerpc.org> Fixes: 97e1c18e8d17b ("tracing: Kernel Tracepoints") Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-04-01libata: fix HDIO_GET_32BIT ioctlArnd Bergmann
commit 287e6611ab1eac76c2c5ebf6e345e04c80ca9c61 upstream. As reported by Soohoon Lee, the HDIO_GET_32BIT ioctl does not work correctly in compat mode with libata. I have investigated the issue further and found multiple problems that all appeared with the same commit that originally introduced HDIO_GET_32BIT handling in libata back in linux-2.6.8 and presumably also linux-2.4, as the code uses "copy_to_user(arg, &val, 1)" to copy a 'long' variable containing either 0 or 1 to user space. The problems with this are: * On big-endian machines, this will always write a zero because it stores the wrong byte into user space. * In compat mode, the upper three bytes of the variable are updated by the compat_hdio_ioctl() function, but they now contain uninitialized stack data. * The hdparm tool calling this ioctl uses a 'static long' variable to store the result. This means at least the upper bytes are initialized to zero, but calling another ioctl like HDIO_GET_MULTCOUNT would fill them with data that remains stale when the low byte is overwritten. Fortunately libata doesn't implement any of the affected ioctl commands, so this would only happen when we query both an IDE and an ATA device in the same command such as "hdparm -N -c /dev/hda /dev/sda" * The libata code for unknown reasons started using ATA_IOC_GET_IO32 and ATA_IOC_SET_IO32 as aliases for HDIO_GET_32BIT and HDIO_SET_32BIT, while the ioctl commands that were added later use the normal HDIO_* names. This is harmless but rather confusing. This addresses all four issues by changing the code to use put_user() on an 'unsigned long' variable in HDIO_GET_32BIT, like the IDE subsystem does, and by clarifying the names of the ioctl commands. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Soohoon Lee <Soohoon.Lee@f5.com> Tested-by: Soohoon Lee <Soohoon.Lee@f5.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-04-01nfs: fix nfs_size_to_loff_tChristoph Hellwig
commit 50ab8ec74a153eb30db26529088bc57dd700b24c upstream. See http: //www.infradead.org/rpr.html X-Evolution-Source: 1451162204.2173.11@leira.trondhjem.org Content-Transfer-Encoding: 8bit Mime-Version: 1.0 We support OFFSET_MAX just fine, so don't round down below it. Also switch to using min_t to make the helper more readable. Signed-off-by: Christoph Hellwig <hch@lst.de> Fixes: 433c92379d9c ("NFS: Clean up nfs_size_to_loff_t()") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-02-27pipe: limit the per-user amount of pages allocated in pipesWilly Tarreau
commit 759c01142a5d0f364a462346168a56de28a80f52 upstream. On no-so-small systems, it is possible for a single process to cause an OOM condition by filling large pipes with data that are never read. A typical process filling 4000 pipes with 1 MB of data will use 4 GB of memory. On small systems it may be tricky to set the pipe max size to prevent this from happening. This patch makes it possible to enforce a per-user soft limit above which new pipes will be limited to a single page, effectively limiting them to 4 kB each, as well as a hard limit above which no new pipes may be created for this user. This has the effect of protecting the system against memory abuse without hurting other users, and still allowing pipes to work correctly though with less data at once. The limit are controlled by two new sysctls : pipe-user-pages-soft, and pipe-user-pages-hard. Both may be disabled by setting them to zero. The default soft limit allows the default number of FDs per process (1024) to create pipes of the default size (64kB), thus reaching a limit of 64MB before starting to create only smaller pipes. With 256 processes limited to 1024 FDs each, this results in 1024*64kB + (256*1024 - 1024) * 4kB = 1084 MB of memory allocated for a user. The hard limit is disabled by default to avoid breaking existing applications that make intensive use of pipes (eg: for splicing). Reported-by: socketpair@gmail.com Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Mitigates: CVE-2013-4312 (Linux 2.0+) Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-02-27unix: properly account for FDs passed over unix socketswilly tarreau
commit 712f4aad406bb1ed67f3f98d04c044191f0ff593 upstream. It is possible for a process to allocate and accumulate far more FDs than the process' limit by sending them over a unix socket then closing them to keep the process' fd count low. This change addresses this problem by keeping track of the number of FDs in flight per user and preventing non-privileged processes from having more FDs in flight than their configured FD limit. Reported-by: socketpair@gmail.com Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Mitigates: CVE-2013-4312 (Linux 2.0+) Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: David S. Miller <davem@davemloft.net> [carnil: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-02-27hrtimer: Handle remaining time proper for TIME_LOW_RESThomas Gleixner
commit 203cbf77de59fc8f13502dcfd11350c6d4a5c95f upstream. If CONFIG_TIME_LOW_RES is enabled we add a jiffie to the relative timeout to prevent short sleeps, but we do not account for that in interfaces which retrieve the remaining time. Helge observed that timerfd can return a remaining time larger than the relative timeout. That's not expected and breaks userland test programs. Store the information that the timer was armed relative and provide functions to adjust the remaining time. To avoid bloating the hrtimer struct make state a u8, which as a bonus results in better code on x86 at least. Reported-and-tested-by: Helge Deller <deller@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Cc: linux-m68k@lists.linux-m68k.org Cc: dhowells@redhat.com Link: http://lkml.kernel.org/r/20160114164159.273328486@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [bwh: Backported to 3.2: - Use #ifdef instead of IS_ENABLED() as that doesn't work for config symbols that don't exist on the current architecture - Use KTIME_LOW_RES directly instead of hrtimer_resolution - Use ktime_sub() instead of modifying ktime::tv64 directly - Adjust filename, context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-02-13crypto: skcipher - Add crypto_skcipher_has_setkeyHerbert Xu
commit a1383cd86a062fc798899ab20f0ec2116cce39cb upstream. This patch adds a way for skcipher users to determine whether a key is required by a transform. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> [bwh: Backported to 3.2: add to ablkcipher API instead] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-02-13printk: help pr_debug and pr_devel to optimize out argumentsAaron Conole
commit fe22cd9b7c980b8b948ec85f034a8668c57ec867 upstream. Currently, pr_debug and pr_devel will not elide function call arguments appearing in calls to the no_printk for these macros. This is because all side effects must be honored before proceeding to the 0-value assignment in no_printk. The behavior is contrary to documentation found in the CodingStyle and the header file where these functions are declared. This patch corrects that behavior by shunting out the call to no_printk completely. The format string is still checked by gcc for correctness, but no code seems to be emitted in common cases. [akpm@linux-foundation.org: remove braces, per Joe] Fixes: 5264f2f75d86 ("include/linux/printk.h: use and neaten no_printk") Signed-off-by: Aaron Conole <aconole@redhat.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Joe Perches <joe@perches.com> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-02-13mtd: nand: fix ONFI parameter page layoutBoris BREZILLON
commit de64aa9ec129ba627634088f662a4d09e356ddb6 upstream. src_ssync_features field is only 1 byte large, and the 4th reserved area is actually 8 bytes large. Fixes: d1e1f4e42b5 ("mtd: nand: add support for reading ONFI parameters from NAND device") Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-01-22Revert "net: add length argument to skb_copy_and_csum_datagram_iovec"Ben Hutchings
This reverts commit 127500d724f8c43f452610c9080444eedb5eaa6c. That fixed the problem of buffer over-reads introduced by backporting commit 89c22d8c3b27 ("net: Fix skb csum races when peeking"), but resulted in incorrect checksumming for short reads. It will be replaced with a complete fix. Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-01-22ses: fix additional element traversal bugJames Bottomley
commit 5e1033561da1152c57b97ee84371dba2b3d64c25 upstream. KASAN found that our additional element processing scripts drop off the end of the VPD page into unallocated space. The reason is that not every element has additional information but our traversal routines think they do, leading to them expecting far more additional information than is present. Fix this by adding a gate to the traversal routine so that it only processes elements that are expected to have additional information (list is in SES-2 section 6.1.13.1: Additional Element Status diagnostic page overview) Reported-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Tested-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2015-12-30ipv6: add complete rcu protection around np->optEric Dumazet
[ Upstream commit 45f6fad84cc305103b28d73482b344d7f5b76f39 ] This patch addresses multiple problems : UDP/RAW sendmsg() need to get a stable struct ipv6_txoptions while socket is not locked : Other threads can change np->opt concurrently. Dmitry posted a syzkaller (http://github.com/google/syzkaller) program desmonstrating use-after-free. Starting with TCP/DCCP lockless listeners, tcp_v6_syn_recv_sock() and dccp_v6_request_recv_sock() also need to use RCU protection to dereference np->opt once (before calling ipv6_dup_options()) This patch adds full RCU protection to np->opt Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: - Drop changes to l2tp - Fix an additional use of np->opt in tcp_v6_send_synack() - Fold in commit 43264e0bd963 ("ipv6: remove unnecessary codes in tcp_ipv6.c") - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2015-12-30locking: Add WARN_ON_ONCE lock assertionPeter Hurley
commit 9a37110d20c95d1ebf6c04881177fe8f62831db2 upstream. An interface may need to assert a lock invariant and not flood the system logs; add a lockdep helper macro equivalent to lockdep_assert_held() which only WARNs once. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2015-11-27ACPI: Use correct IRQ when uninstalling ACPI interrupt handlerChen Yu
commit 49e4b84333f338d4f183f28f1f3c1131b9fb2b5a upstream. Currently when the system is trying to uninstall the ACPI interrupt handler, it uses acpi_gbl_FADT.sci_interrupt as the IRQ number. However, the IRQ number that the ACPI interrupt handled is installed for comes from acpi_gsi_to_irq() and that is the number that should be used for the handler removal. Fix this problem by using the mapped IRQ returned from acpi_gsi_to_irq() as appropriate. Acked-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2015-11-27ext4, jbd2: ensure entering into panic after recording an error in superblockDaeho Jeong
commit 4327ba52afd03fc4b5afa0ee1d774c9c5b0e85c5 upstream. If a EXT4 filesystem utilizes JBD2 journaling and an error occurs, the journaling will be aborted first and the error number will be recorded into JBD2 superblock and, finally, the system will enter into the panic state in "errors=panic" option. But, in the rare case, this sequence is little twisted like the below figure and it will happen that the system enters into panic state, which means the system reset in mobile environment, before completion of recording an error in the journal superblock. In this case, e2fsck cannot recognize that the filesystem failure occurred in the previous run and the corruption wouldn't be fixed. Task A Task B ext4_handle_error() -> jbd2_journal_abort() -> __journal_abort_soft() -> __jbd2_journal_abort_hard() | -> journal->j_flags |= JBD2_ABORT; | | __ext4_abort() | -> jbd2_journal_abort() | | -> __journal_abort_soft() | | -> if (journal->j_flags & JBD2_ABORT) | | return; | -> panic() | -> jbd2_journal_update_sb_errno() Tested-by: Hobin Woo <hobin.woo@samsung.com> Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2015-11-17skbuff: Fix skb checksum partial check.Pravin B Shelar
[ Upstream commit 31b33dfb0a144469dd805514c9e63f4993729a48 ] Earlier patch 6ae459bda tried to detect void ckecksum partial skb by comparing pull length to checksum offset. But it does not work for all cases since checksum-offset depends on updates to skb->data. Following patch fixes it by validating checksum start offset after skb-data pointer is updated. Negative value of checksum offset start means there is no need to checksum. Fixes: 6ae459bda ("skbuff: Fix skb checksum flag on skb pull") Reported-by: Andrew Vagin <avagin@odin.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2015-11-17skbuff: Fix skb checksum flag on skb pullPravin B Shelar
[ Upstream commit 6ae459bdaaeebc632b16e54dcbabb490c6931d61 ] VXLAN device can receive skb with checksum partial. But the checksum offset could be in outer header which is pulled on receive. This results in negative checksum offset for the skb. Such skb can cause the assert failure in skb_checksum_help(). Following patch fixes the bug by setting checksum-none while pulling outer header. Following is the kernel panic msg from old kernel hitting the bug. ------------[ cut here ]------------ kernel BUG at net/core/dev.c:1906! RIP: 0010:[<ffffffff81518034>] skb_checksum_help+0x144/0x150 Call Trace: <IRQ> [<ffffffffa0164c28>] queue_userspace_packet+0x408/0x470 [openvswitch] [<ffffffffa016614d>] ovs_dp_upcall+0x5d/0x60 [openvswitch] [<ffffffffa0166236>] ovs_dp_process_packet_with_key+0xe6/0x100 [openvswitch] [<ffffffffa016629b>] ovs_dp_process_received_packet+0x4b/0x80 [openvswitch] [<ffffffffa016c51a>] ovs_vport_receive+0x2a/0x30 [openvswitch] [<ffffffffa0171383>] vxlan_rcv+0x53/0x60 [openvswitch] [<ffffffffa01734cb>] vxlan_udp_encap_recv+0x8b/0xf0 [openvswitch] [<ffffffff8157addc>] udp_queue_rcv_skb+0x2dc/0x3b0 [<ffffffff8157b56f>] __udp4_lib_rcv+0x1cf/0x6c0 [<ffffffff8157ba7a>] udp_rcv+0x1a/0x20 [<ffffffff8154fdbd>] ip_local_deliver_finish+0xdd/0x280 [<ffffffff81550128>] ip_local_deliver+0x88/0x90 [<ffffffff8154fa7d>] ip_rcv_finish+0x10d/0x370 [<ffffffff81550365>] ip_rcv+0x235/0x300 [<ffffffff8151ba1d>] __netif_receive_skb+0x55d/0x620 [<ffffffff8151c360>] netif_receive_skb+0x80/0x90 [<ffffffff81459935>] virtnet_poll+0x555/0x6f0 [<ffffffff8151cd04>] net_rx_action+0x134/0x290 [<ffffffff810683d8>] __do_softirq+0xa8/0x210 [<ffffffff8162fe6c>] call_softirq+0x1c/0x30 [<ffffffff810161a5>] do_softirq+0x65/0xa0 [<ffffffff810687be>] irq_exit+0x8e/0xb0 [<ffffffff81630733>] do_IRQ+0x63/0xe0 [<ffffffff81625f2e>] common_interrupt+0x6e/0x6e Reported-by: Anupam Chanda <achanda@vmware.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2015-11-17net: add length argument to skb_copy_and_csum_datagram_iovecSabrina Dubroca
Without this length argument, we can read past the end of the iovec in memcpy_toiovec because we have no way of knowing the total length of the iovec's buffers. This is needed for stable kernels where 89c22d8c3b27 ("net: Fix skb csum races when peeking") has been backported but that don't have the ioviter conversion, which is almost all the stable trees <= 3.18. This also fixes a kernel crash for NFS servers when the client uses -onfsvers=3,proto=udp to mount the export. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> [bwh: Backported to 3.2: adjust context in include/linux/skbuff.h] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2015-11-17sched: declare pid_alive as inlineRichard Guy Briggs
commit 80e0b6e8a001361316a2d62b748fe677ec46b860 upstream. We accidentally declared pid_alive without any extern/inline connotation. Some platforms were fine with this, some like ia64 and mips were very angry. If the function is inline, the prototype should be inline! on ia64: include/linux/sched.h:1718: warning: 'pid_alive' declared inline after being called Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Neal Gompa <ngompa13@gmail.com>
2015-10-13jbd2: avoid infinite loop when destroying aborted journalJan Kara
commit 841df7df196237ea63233f0f9eaa41db53afd70f upstream. Commit 6f6a6fda2945 "jbd2: fix ocfs2 corrupt when updating journal superblock fails" changed jbd2_cleanup_journal_tail() to return EIO when the journal is aborted. That makes logic in jbd2_log_do_checkpoint() bail out which is fine, except that jbd2_journal_destroy() expects jbd2_log_do_checkpoint() to always make a progress in cleaning the journal. Without it jbd2_journal_destroy() just loops in an infinite loop. Fix jbd2_journal_destroy() to cleanup journal checkpoint lists of jbd2_log_do_checkpoint() fails with error. Reported-by: Eryu Guan <guaneryu@gmail.com> Tested-by: Eryu Guan <guaneryu@gmail.com> Fixes: 6f6a6fda294506dfe0e3e0a253bb2d2923f28f0a Signed-off-by: Jan Kara <jack@suse.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Roland Dreier <roland@kernel.org>
2015-10-13fs: create and use seq_show_option for escapingKees Cook
commit a068acf2ee77693e0bf39d6e07139ba704f461c3 upstream. Many file systems that implement the show_options hook fail to correctly escape their output which could lead to unescaped characters (e.g. new lines) leaking into /proc/mounts and /proc/[pid]/mountinfo files. This could lead to confusion, spoofed entries (resulting in things like systemd issuing false d-bus "mount" notifications), and who knows what else. This looks like it would only be the root user stepping on themselves, but it's possible weird things could happen in containers or in other situations with delegated mount privileges. Here's an example using overlay with setuid fusermount trusting the contents of /proc/mounts (via the /etc/mtab symlink). Imagine the use of "sudo" is something more sneaky: $ BASE="ovl" $ MNT="$BASE/mnt" $ LOW="$BASE/lower" $ UP="$BASE/upper" $ WORK="$BASE/work/ 0 0 none /proc fuse.pwn user_id=1000" $ mkdir -p "$LOW" "$UP" "$WORK" $ sudo mount -t overlay -o "lowerdir=$LOW,upperdir=$UP,workdir=$WORK" none /mnt $ cat /proc/mounts none /root/ovl/mnt overlay rw,relatime,lowerdir=ovl/lower,upperdir=ovl/upper,workdir=ovl/work/ 0 0 none /proc fuse.pwn user_id=1000 0 0 $ fusermount -u /proc $ cat /proc/mounts cat: /proc/mounts: No such file or directory This fixes the problem by adding new seq_show_option and seq_show_option_n helpers, and updating the vulnerable show_option handlers to use them as needed. Some, like SELinux, need to be open coded due to unusual existing escape mechanisms. [akpm@linux-foundation.org: add lost chunk, per Kees] [keescook@chromium.org: seq_show_option should be using const parameters] Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Jan Kara <jack@suse.com> Acked-by: Paul Moore <paul@paul-moore.com> Cc: J. R. Okajima <hooanon05g@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.2: - Drop changes to overlayfs, reiserfs - Drop vers option from cifs - ceph changes are all in one file - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2015-10-13drivers: usb: fsl: Workaround for USB erratum-A005275Nikhil Badola
commit f8786a91548df6930643a052e40e5c0b7a8403a5 upstream. Incoming packets in high speed are randomly corrupted by h/w resulting in multiple errors. This workaround makes FS as default mode in all affected socs by disabling HS chirp signalling.This errata does not affect FS and LS mode. Forces all HS devices to connect in FS mode for all socs affected by this erratum: P3041 and P2041 rev 1.0 and 1.1 P5020 and P5010 rev 1.0 and 2.0 P5040, P1010 and T4240 rev 1.0 Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2015-10-13PCI: Add dev_flags bit to access VPD through function 0Mark Rustad
commit 932c435caba8a2ce473a91753bad0173269ef334 upstream. Add a dev_flags bit, PCI_DEV_FLAGS_VPD_REF_F0, to access VPD through function 0 to provide VPD access on other functions. This is for hardware devices that provide copies of the same VPD capability registers in multiple functions. Because the kernel expects that each function has its own registers, both the locking and the state tracking are affected by VPD accesses to different functions. On such devices for example, if a VPD write is performed on function 0, *any* later attempt to read VPD from any other function of that device will hang. This has to do with how the kernel tracks the expected value of the F bit per function. Concurrent accesses to different functions of the same device can not only hang but also corrupt both read and write VPD data. When hangs occur, typically the error message: vpd r/w failed. This is likely a firmware bug on this device. will be seen. Never set this bit on function 0 or there will be an infinite recursion. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2015-08-12libata: add ATA_HORKAGE_NOTRIMArne Fitzenreiter
commit 71d126fd28de2d4d9b7b2088dbccd7ca62fad6e0 upstream. Some devices lose data on TRIM whether queued or not. This patch adds a horkage to disable TRIM. tj: Collapsed unnecessary if() nesting. Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org> Signed-off-by: Tejun Heo <tj@kernel.org> [bwh: Backported to 3.2: - Adjust context - Drop change to show_ata_dev_trim()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2015-08-12bufferhead: Add _gfp version for sb_getblk()Nikolay Borisov
commit bd7ade3cd9b0850264306f5c2b79024a417b6396 upstream. sb_getblk() is used during ext4 (and possibly other FSes) writeback paths. Sometimes such path require allocating memory and guaranteeing that such allocation won't block. Currently, however, there is no way to provide user flags for sb_getblk which could lead to deadlocks. This patch implements a sb_getblk_gfp with the only difference it can accept user-provided GFP flags. Signed-off-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2015-08-12fs/buffer.c: support buffer cache allocations with gfp modifiersGioh Kim
commit 3b5e6454aaf6b4439b19400d8365e2ec2d24e411 upstream. A buffer cache is allocated from movable area because it is referred for a while and released soon. But some filesystems are taking buffer cache for a long time and it can disturb page migration. New APIs are introduced to allocate buffer cache with user specific flag. *_gfp APIs are for user want to set page allocation flag for page cache allocation. And *_unmovable APIs are for the user wants to allocate page cache from non-movable area. Signed-off-by: Gioh Kim <gioh.kim@lge.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> [bwh: Prerequisite for "bufferhead: Add _gfp version for sb_getblk()". Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2015-08-12nfs: increase size of EXCHANGE_ID name string bufferJeff Layton
commit 764ad8ba8cd4c6f836fca9378f8c5121aece0842 upstream. The current buffer is much too small if you have a relatively long hostname. Bring it up to the size of the one that SETCLIENTID has. Reported-by: Michael Skralivetsky <michael.skralivetsky@primarydata.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2015-08-12jbd2: fix ocfs2 corrupt when updating journal superblock failsJoseph Qi
commit 6f6a6fda294506dfe0e3e0a253bb2d2923f28f0a upstream. If updating journal superblock fails after journal data has been flushed, the error is omitted and this will mislead the caller as a normal case. In ocfs2, the checkpoint will be treated successfully and the other node can get the lock to update. Since the sb_start is still pointing to the old log block, it will rewrite the journal data during journal recovery by the other node. Thus the new updates will be overwritten and ocfs2 corrupts. So in above case we have to return the error, and ocfs2_commit_cache will take care of the error and prevent the other node to do update first. And only after recovering journal it can do the new updates. The issue discussion mail can be found at: https://oss.oracle.com/pipermail/ocfs2-devel/2015-June/010856.html http://comments.gmane.org/gmane.comp.file-systems.ext4/48841 [ Fixed bug in patch which allowed a non-negative error return from jbd2_cleanup_journal_tail() to leak out of jbd2_fjournal_flush(); this was causing xfstests ext4/306 to fail. -- Ted ] Reported-by: Yiwen Jiang <jiangyiwen@huawei.com> Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Tested-by: Yiwen Jiang <jiangyiwen@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> [bwh: Backported to 3.2: - Adjust context - Don't drop j_checkpoint_mutex where we don't hold it] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2015-08-12jbd2: issue cache flush after checkpointing even with internal journalJan Kara
commit 79feb521a44705262d15cc819a4117a447b11ea7 upstream. When we reach jbd2_cleanup_journal_tail(), there is no guarantee that checkpointed buffers are on a stable storage - especially if buffers were written out by jbd2_log_do_checkpoint(), they are likely to be only in disk's caches. Thus when we update journal superblock effectively removing old transaction from journal, this write of superblock can get to stable storage before those checkpointed buffers which can result in filesystem corruption after a crash. Thus we must unconditionally issue a cache flush before we update journal superblock in these cases. A similar problem can also occur if journal superblock is written only in disk's caches, other transaction starts reusing space of the transaction cleaned from the log and power failure happens. Subsequent journal replay would still try to replay the old transaction but some of it's blocks may be already overwritten by the new transaction. For this reason we must use WRITE_FUA when updating log tail and we must first write new log tail to disk and update in-memory information only after that. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> [bwh: Prerequisite for "jbd2: fix ocfs2 corrupt when updating journal superblock fails". Backported to 3.2: - Adjust context - Drop changes to jbd2_journal_update_sb_log_tail trace event] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2015-08-12jbd2: split updating of journal superblock and marking journal emptyJan Kara
commit 24bcc89c7e7c64982e6192b4952a0a92379fc341 upstream. There are three case of updating journal superblock. In the first case, we want to mark journal as empty (setting s_sequence to 0), in the second case we want to update log tail, in the third case we want to update s_errno. Split these cases into separate functions. It makes the code slightly more straightforward and later patches will make the distinction even more important. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> [bwh: Prerequisite for "jbd2: fix ocfs2 corrupt when updating journal superblock fails". Backported to 3.2: drop changes to trace events.] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2015-08-07include/linux/sched.h: don't use task->pid/tgid in ↵Oleg Nesterov
same_thread_group/has_group_leader_pid commit e1403b8edf669ff49bbdf602cc97fefa2760cb15 upstream. task_struct->pid/tgid should go away. 1. Change same_thread_group() to use task->signal for comparison. 2. Change has_group_leader_pid(task) to compare task_pid(task) with signal->leader_pid. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Sergey Dyasly <dserrg@gmail.com> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Sheng Yong <shengyong1@huawei.com>
generated by cgit v1.3 (git 2.53.0) at 2026-04-02 01:43:57 +0000