| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit a14587dfc5ad2312dabdd42a610d80ecd0dc8bea ]
The cited commit wrongly placed log_max_flow_counter field of
mlx5_ifc_flow_table_prop_layout_bits, align it to the HW spec intended
placement.
Fixes: 16f1c5bb3ed7 ("net/mlx5: Check device capability for maximum flow counters")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 61431a5907fc36d0738e9a547c7e1556349a03e9 upstream.
Commit 924a9bc362a5 ("net: check if protocol extracted by virtio_net_hdr_set_proto is correct")
added a call to dev_parse_header_protocol() but mac_header is not yet set.
This means that eth_hdr() reads complete garbage, and syzbot complained about it [1]
This patch resets mac_header earlier, to get more coverage about this change.
Audit of virtio_net_hdr_to_skb() callers shows that this change should be safe.
[1]
BUG: KASAN: use-after-free in eth_header_parse_protocol+0xdc/0xe0 net/ethernet/eth.c:282
Read of size 2 at addr ffff888017a6200b by task syz-executor313/8409
CPU: 1 PID: 8409 Comm: syz-executor313 Not tainted 5.12.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x141/0x1d7 lib/dump_stack.c:120
print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:232
__kasan_report mm/kasan/report.c:399 [inline]
kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:416
eth_header_parse_protocol+0xdc/0xe0 net/ethernet/eth.c:282
dev_parse_header_protocol include/linux/netdevice.h:3177 [inline]
virtio_net_hdr_to_skb.constprop.0+0x99d/0xcd0 include/linux/virtio_net.h:83
packet_snd net/packet/af_packet.c:2994 [inline]
packet_sendmsg+0x2325/0x52b0 net/packet/af_packet.c:3031
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
sock_no_sendpage+0xf3/0x130 net/core/sock.c:2860
kernel_sendpage.part.0+0x1ab/0x350 net/socket.c:3631
kernel_sendpage net/socket.c:3628 [inline]
sock_sendpage+0xe5/0x140 net/socket.c:947
pipe_to_sendpage+0x2ad/0x380 fs/splice.c:364
splice_from_pipe_feed fs/splice.c:418 [inline]
__splice_from_pipe+0x43e/0x8a0 fs/splice.c:562
splice_from_pipe fs/splice.c:597 [inline]
generic_splice_sendpage+0xd4/0x140 fs/splice.c:746
do_splice_from fs/splice.c:767 [inline]
do_splice+0xb7e/0x1940 fs/splice.c:1079
__do_splice+0x134/0x250 fs/splice.c:1144
__do_sys_splice fs/splice.c:1350 [inline]
__se_sys_splice fs/splice.c:1332 [inline]
__x64_sys_splice+0x198/0x250 fs/splice.c:1332
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
Fixes: 924a9bc362a5 ("net: check if protocol extracted by virtio_net_hdr_set_proto is correct")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Balazs Nemeth <bnemeth@redhat.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c9570d4a5efd04479b3cd09c39b571eb031d94f4 ]
Add stubs for extcon_register_notifier_all() function for !CONFIG_EXTCON
case. This is useful for compile testing and for drivers which use
EXTCON but do not require it (therefore do not depend on CONFIG_EXTCON).
Fixes: 815429b39d94 ("extcon: Add new extcon_register_notifier_all() to monitor all external connectors")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 0b3d6e6f2dd0a7b697b1aa8c167265908940624b upstream.
Since commit a983b5ebee57 ("mm: memcontrol: fix excessive complexity in
memory.stat reporting") memcg dirty and writeback counters are managed
as:
1) per-memcg per-cpu values in range of [-32..32]
2) per-memcg atomic counter
When a per-cpu counter cannot fit in [-32..32] it's flushed to the
atomic. Stat readers only check the atomic. Thus readers such as
balance_dirty_pages() may see a nontrivial error margin: 32 pages per
cpu.
Assuming 100 cpus:
4k x86 page_size: 13 MiB error per memcg
64k ppc page_size: 200 MiB error per memcg
Considering that dirty+writeback are used together for some decisions the
errors double.
This inaccuracy can lead to undeserved oom kills. One nasty case is
when all per-cpu counters hold positive values offsetting an atomic
negative value (i.e. per_cpu[*]=32, atomic=n_cpu*-32).
balance_dirty_pages() only consults the atomic and does not consider
throttling the next n_cpu*32 dirty pages. If the file_lru is in the
13..200 MiB range then there's absolutely no dirty throttling, which
burdens vmscan with only dirty+writeback pages thus resorting to oom
kill.
It could be argued that tiny containers are not supported, but it's more
subtle. It's the amount the space available for file lru that matters.
If a container has memory.max-200MiB of non reclaimable memory, then it
will also suffer such oom kills on a 100 cpu machine.
The following test reliably ooms without this patch. This patch avoids
oom kills.
$ cat test
mount -t cgroup2 none /dev/cgroup
cd /dev/cgroup
echo +io +memory > cgroup.subtree_control
mkdir test
cd test
echo 10M > memory.max
(echo $BASHPID > cgroup.procs && exec /memcg-writeback-stress /foo)
(echo $BASHPID > cgroup.procs && exec dd if=/dev/zero of=/foo bs=2M count=100)
$ cat memcg-writeback-stress.c
/*
* Dirty pages from all but one cpu.
* Clean pages from the non dirtying cpu.
* This is to stress per cpu counter imbalance.
* On a 100 cpu machine:
* - per memcg per cpu dirty count is 32 pages for each of 99 cpus
* - per memcg atomic is -99*32 pages
* - thus the complete dirty limit: sum of all counters 0
* - balance_dirty_pages() only sees atomic count -99*32 pages, which
* it max()s to 0.
* - So a workload can dirty -99*32 pages before balance_dirty_pages()
* cares.
*/
#define _GNU_SOURCE
#include <err.h>
#include <fcntl.h>
#include <sched.h>
#include <stdlib.h>
#include <stdio.h>
#include <sys/stat.h>
#include <sys/sysinfo.h>
#include <sys/types.h>
#include <unistd.h>
static char *buf;
static int bufSize;
static void set_affinity(int cpu)
{
cpu_set_t affinity;
CPU_ZERO(&affinity);
CPU_SET(cpu, &affinity);
if (sched_setaffinity(0, sizeof(affinity), &affinity))
err(1, "sched_setaffinity");
}
static void dirty_on(int output_fd, int cpu)
{
int i, wrote;
set_affinity(cpu);
for (i = 0; i < 32; i++) {
for (wrote = 0; wrote < bufSize; ) {
int ret = write(output_fd, buf+wrote, bufSize-wrote);
if (ret == -1)
err(1, "write");
wrote += ret;
}
}
}
int main(int argc, char **argv)
{
int cpu, flush_cpu = 1, output_fd;
const char *output;
if (argc != 2)
errx(1, "usage: output_file");
output = argv[1];
bufSize = getpagesize();
buf = malloc(getpagesize());
if (buf == NULL)
errx(1, "malloc failed");
output_fd = open(output, O_CREAT|O_RDWR);
if (output_fd == -1)
err(1, "open(%s)", output);
for (cpu = 0; cpu < get_nprocs(); cpu++) {
if (cpu != flush_cpu)
dirty_on(output_fd, cpu);
}
set_affinity(flush_cpu);
if (fsync(output_fd))
err(1, "fsync(%s)", output);
if (close(output_fd))
err(1, "close(%s)", output);
free(buf);
}
Make balance_dirty_pages() and wb_over_bg_thresh() work harder to
collect exact per memcg counters. This avoids the aforementioned oom
kills.
This does not affect the overhead of memory.stat, which still reads the
single atomic counter.
Why not use percpu_counter? memcg already handles cpus going offline, so
no need for that overhead from percpu_counter. And the percpu_counter
spinlocks are more heavyweight than is required.
It probably also makes sense to use exact dirty and writeback counters
in memcg oom reports. But that is saved for later.
Link: http://lkml.kernel.org/r/20190329174609.164344-1-gthelen@google.com
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org> [4.16+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit fe6bdfc8e1e131720abbe77a2eb990c94c9024cb upstream.
Commit e27be240df53 ("mm: memcg: make sure memory.events is uptodate
when waking pollers") converted most of memcg event counters to
per-memcg atomics, which made them less confusing for a user. The
"oom_kill" counter remained untouched, so now it behaves differently
than other counters (including "oom"). This adds nothing but confusion.
Let's fix this by adding the MEMCG_OOM_KILL event, and follow the
MEMCG_OOM approach.
This also removes a hack from count_memcg_event_mm(), introduced earlier
specially for the OOM_KILL counter.
[akpm@linux-foundation.org: fix for droppage of memcg-replace-mm-owner-with-mm-memcg.patch]
Link: http://lkml.kernel.org/r/20180508124637.29984-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[fllinden@amazon.com: backport to 4.14, minor contextual changes]
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
same cacheline
commit e81bf9793b1861d74953ef041b4f6c7faecc2dbd upstream.
The LKP robot found a 27% will-it-scale/page_fault3 performance
regression regarding commit e27be240df53("mm: memcg: make sure
memory.events is uptodate when waking pollers").
What the test does is:
1 mkstemp() a 128M file on a tmpfs;
2 start $nr_cpu processes, each to loop the following:
2.1 mmap() this file in shared write mode;
2.2 write 0 to this file in a PAGE_SIZE step till the end of the file;
2.3 unmap() this file and repeat this process.
3 After 5 minutes, check how many loops they managed to complete, the
higher the better.
The commit itself looks innocent enough as it merely changed some event
counting mechanism and this test didn't trigger those events at all.
Perf shows increased cycles spent on accessing root_mem_cgroup->stat_cpu
in count_memcg_event_mm()(called by handle_mm_fault()) and in
__mod_memcg_state() called by page_add_file_rmap(). So it's likely due
to the changed layout of 'struct mem_cgroup' that either make stat_cpu
falling into a constantly modifying cacheline or some hot fields stop
being in the same cacheline.
I verified this by moving memory_events[] back to where it was:
: --- a/include/linux/memcontrol.h
: +++ b/include/linux/memcontrol.h
: @@ -205,7 +205,6 @@ struct mem_cgroup {
: int oom_kill_disable;
:
: /* memory.events */
: - atomic_long_t memory_events[MEMCG_NR_MEMORY_EVENTS];
: struct cgroup_file events_file;
:
: /* protect arrays of thresholds */
: @@ -238,6 +237,7 @@ struct mem_cgroup {
: struct mem_cgroup_stat_cpu __percpu *stat_cpu;
: atomic_long_t stat[MEMCG_NR_STAT];
: atomic_long_t events[NR_VM_EVENT_ITEMS];
: + atomic_long_t memory_events[MEMCG_NR_MEMORY_EVENTS];
:
: unsigned long socket_pressure;
And performance restored.
Later investigation found that as long as the following 3 fields
moving_account, move_lock_task and stat_cpu are in the same cacheline,
performance will be good. To avoid future performance surprise by other
commits changing the layout of 'struct mem_cgroup', this patch makes
sure the 3 fields stay in the same cacheline.
One concern of this approach is, moving_account and move_lock_task could
be modified when a process changes memory cgroup while stat_cpu is a
always read field, it might hurt to place them in the same cacheline. I
assume it is rare for a process to change memory cgroup so this should
be OK.
Link: https://lkml.kernel.org/r/20180528114019.GF9904@yexl-desktop
Link: http://lkml.kernel.org/r/20180601071115.GA27302@intel.com
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit e27be240df53f1a20c659168e722b5d9f16cc7f4 upstream.
Commit a983b5ebee57 ("mm: memcontrol: fix excessive complexity in
memory.stat reporting") added per-cpu drift to all memory cgroup stats
and events shown in memory.stat and memory.events.
For memory.stat this is acceptable. But memory.events issues file
notifications, and somebody polling the file for changes will be
confused when the counters in it are unchanged after a wakeup.
Luckily, the events in memory.events - MEMCG_LOW, MEMCG_HIGH, MEMCG_MAX,
MEMCG_OOM - are sufficiently rare and high-level that we don't need
per-cpu buffering for them: MEMCG_HIGH and MEMCG_MAX would be the most
frequent, but they're counting invocations of reclaim, which is a
complex operation that touches many shared cachelines.
This splits memory.events from the generic VM events and tracks them in
their own, unbuffered atomic counters. That's also cleaner, as it
eliminates the ugly enum nesting of VM and cgroup events.
[hannes@cmpxchg.org: "array subscript is above array bounds"]
Link: http://lkml.kernel.org/r/20180406155441.GA20806@cmpxchg.org
Link: http://lkml.kernel.org/r/20180405175507.GA24817@cmpxchg.org
Fixes: a983b5ebee57 ("mm: memcontrol: fix excessive complexity in memory.stat reporting")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Tejun Heo <tj@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c3cc39118c3610eb6ab4711bc624af7fc48a35fe upstream.
After commit a983b5ebee57 ("mm: memcontrol: fix excessive complexity in
memory.stat reporting"), we observed slowly upward creeping NR_WRITEBACK
counts over the course of several days, both the per-memcg stats as well
as the system counter in e.g. /proc/meminfo.
The conversion from full per-cpu stat counts to per-cpu cached atomic
stat counts introduced an irq-unsafe RMW operation into the updates.
Most stat updates come from process context, but one notable exception
is the NR_WRITEBACK counter. While writebacks are issued from process
context, they are retired from (soft)irq context.
When writeback completions interrupt the RMW counter updates of new
writebacks being issued, the decs from the completions are lost.
Since the global updates are routed through the joint lruvec API, both
the memcg counters as well as the system counters are affected.
This patch makes the joint stat and event API irq safe.
Link: http://lkml.kernel.org/r/20180203082353.17284-1-hannes@cmpxchg.org
Fixes: a983b5ebee57 ("mm: memcontrol: fix excessive complexity in memory.stat reporting")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Debugged-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 291da9d4a9eb3a1cb0610b7f4480f5b52b1825e7 upstream.
If CONFIG_DEBUG_LOCK_ALLOC=n then mutex_lock_io_nested() maps to
mutex_lock() which is clearly wrong because mutex_lock() lacks the
io_schedule_prepare()/finish() invocations.
Map it to mutex_lock_io().
Fixes: f21860bac05b ("locking/mutex, sched/wait: Fix the mutex_lock_io_nested() define")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/878s6fshii.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit dd4fa1dae9f4847cc1fd78ca468ad69e16e5db3e ]
macvlan_count_rx() can be called from process context, it is thus
necessary to disable preemption before calling u64_stats_update_begin()
syzbot was able to spot this on 32bit arch:
WARNING: CPU: 1 PID: 4632 at include/linux/seqlock.h:271 __seqprop_assert include/linux/seqlock.h:271 [inline]
WARNING: CPU: 1 PID: 4632 at include/linux/seqlock.h:271 __seqprop_assert.constprop.0+0xf0/0x11c include/linux/seqlock.h:269
Modules linked in:
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 4632 Comm: kworker/1:3 Not tainted 5.12.0-rc2-syzkaller #0
Hardware name: ARM-Versatile Express
Workqueue: events macvlan_process_broadcast
Backtrace:
[<82740468>] (dump_backtrace) from [<827406dc>] (show_stack+0x18/0x1c arch/arm/kernel/traps.c:252)
r7:00000080 r6:60000093 r5:00000000 r4:8422a3c4
[<827406c4>] (show_stack) from [<82751b58>] (__dump_stack lib/dump_stack.c:79 [inline])
[<827406c4>] (show_stack) from [<82751b58>] (dump_stack+0xb8/0xe8 lib/dump_stack.c:120)
[<82751aa0>] (dump_stack) from [<82741270>] (panic+0x130/0x378 kernel/panic.c:231)
r7:830209b4 r6:84069ea4 r5:00000000 r4:844350d0
[<82741140>] (panic) from [<80244924>] (__warn+0xb0/0x164 kernel/panic.c:605)
r3:8404ec8c r2:00000000 r1:00000000 r0:830209b4
r7:0000010f
[<80244874>] (__warn) from [<82741520>] (warn_slowpath_fmt+0x68/0xd4 kernel/panic.c:628)
r7:81363f70 r6:0000010f r5:83018e50 r4:00000000
[<827414bc>] (warn_slowpath_fmt) from [<81363f70>] (__seqprop_assert include/linux/seqlock.h:271 [inline])
[<827414bc>] (warn_slowpath_fmt) from [<81363f70>] (__seqprop_assert.constprop.0+0xf0/0x11c include/linux/seqlock.h:269)
r8:5a109000 r7:0000000f r6:a568dac0 r5:89802300 r4:00000001
[<81363e80>] (__seqprop_assert.constprop.0) from [<81364af0>] (u64_stats_update_begin include/linux/u64_stats_sync.h:128 [inline])
[<81363e80>] (__seqprop_assert.constprop.0) from [<81364af0>] (macvlan_count_rx include/linux/if_macvlan.h:47 [inline])
[<81363e80>] (__seqprop_assert.constprop.0) from [<81364af0>] (macvlan_broadcast+0x154/0x26c drivers/net/macvlan.c:291)
r5:89802300 r4:8a927740
[<8136499c>] (macvlan_broadcast) from [<81365020>] (macvlan_process_broadcast+0x258/0x2d0 drivers/net/macvlan.c:317)
r10:81364f78 r9:8a86d000 r8:8a9c7e7c r7:8413aa5c r6:00000000 r5:00000000
r4:89802840
[<81364dc8>] (macvlan_process_broadcast) from [<802696a4>] (process_one_work+0x2d4/0x998 kernel/workqueue.c:2275)
r10:00000008 r9:8404ec98 r8:84367a02 r7:ddfe6400 r6:ddfe2d40 r5:898dac80
r4:8a86d43c
[<802693d0>] (process_one_work) from [<80269dcc>] (worker_thread+0x64/0x54c kernel/workqueue.c:2421)
r10:00000008 r9:8a9c6000 r8:84006d00 r7:ddfe2d78 r6:898dac94 r5:ddfe2d40
r4:898dac80
[<80269d68>] (worker_thread) from [<80271f40>] (kthread+0x184/0x1a4 kernel/kthread.c:292)
r10:85247e64 r9:898dac80 r8:80269d68 r7:00000000 r6:8a9c6000 r5:89a2ee40
r4:8a97bd00
[<80271dbc>] (kthread) from [<80200114>] (ret_from_fork+0x14/0x20 arch/arm/kernel/entry-common.S:158)
Exception stack(0x8a9c7fb0 to 0x8a9c7ff8)
Fixes: 412ca1550cbe ("macvlan: Move broadcasts into a work queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d5b0e0677bfd5efd17c5bbb00156931f0d41cb85 ]
Jakub reported that:
static struct net_device *rtl8139_init_board(struct pci_dev *pdev)
{
...
u64_stats_init(&tp->rx_stats.syncp);
u64_stats_init(&tp->tx_stats.syncp);
...
}
results in lockdep getting confused between the RX and TX stats lock.
This is because u64_stats_init() is an inline calling seqcount_init(),
which is a macro using a static variable to generate a lockdep class.
By wrapping that in an inline, we negate the effect of the macro and
fold the static key variable, hence the confusion.
Fix by also making u64_stats_init() a macro for the case where it
matters, leaving the other case an inline for argument validation
etc.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Debugged-by: "Ahmed S. Darwish" <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: "Erhard F." <erhard_f@mailbox.org>
Link: https://lkml.kernel.org/r/YEXicy6+9MksdLZh@hirez.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 5abbe51a526253b9f003e9a0a195638dc882d660 upstream.
Preparation for fixing get_nr_restart_syscall() on X86 for COMPAT.
Add a new helper which sets restart_block->fn and calls a dummy
arch_set_restart_data() helper.
Fixes: 609c19a385c8 ("x86/ptrace: Stop setting TS_COMPAT in ptrace code")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210201174641.GA17871@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 546aa0e4ea6ed81b6c51baeebc4364542fa3f3a7 upstream.
Matthias reports that the Amazon Kindle automatically removes its
emulated media if it doesn't receive another SCSI command within about
one second after a SYNCHRONIZE CACHE. It does so even when the host
has sent a PREVENT MEDIUM REMOVAL command. The reason for this
behavior isn't clear, although it's not hard to make some guesses.
At any rate, the results can be unexpected for anyone who tries to
access the Kindle in an unusual fashion, and in theory they can lead
to data loss (for example, if one file is closed and synchronized
while other files are still in the middle of being written).
To avoid such problems, this patch creates a new usb-storage quirks
flag telling the driver always to issue a REQUEST SENSE following a
SYNCHRONIZE CACHE command, and adds an unusual_devs entry for the
Kindle with the flag set. This is sufficient to prevent the Kindle
from doing its automatic unload, without interfering with proper
operation.
Another possible way to deal with this would be to increase the
frequency of TEST UNIT READY polling that the kernel normally carries
out for removable-media storage devices. However that would increase
the overall load on the system and it is not as reliable, because the
user can override the polling interval. Changing the driver's
behavior is safer and has minimal overhead.
CC: <stable@vger.kernel.org>
Reported-and-tested-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20210317190654.GA497856@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 149fc787353f65b7e72e05e7b75d34863266c3e2 ]
Fix a sparse warning by using rcu_dereference(). Technically this is a
bug and a sufficiently aggressive compiler could reload the `real_parent'
pointer outside the protection of the rcu lock (and access freed memory),
but I think it's pretty unlikely to happen.
Link: https://lkml.kernel.org/r/20210221194207.1351703-1-willy@infradead.org
Fixes: b18dc5f291c0 ("mm, oom: skip vforked tasks from being selected")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cbf78d85079cee662c45749ef4f744d41be85d48 ]
With clang-13, some functions only get partially inlined, with a
specialized version referring to a global variable. This triggers a
harmless build-time check for the intel-rng driver:
WARNING: modpost: drivers/char/hw_random/intel-rng.o(.text+0xe): Section mismatch in reference from the function stop_machine() to the function .init.text:intel_rng_hw_init()
The function stop_machine() references
the function __init intel_rng_hw_init().
This is often because stop_machine lacks a __init
annotation or the annotation of intel_rng_hw_init is wrong.
In this instance, an easy workaround is to force the stop_machine()
function to be inline, along with related interfaces that did not show the
same behavior at the moment, but theoretically could.
The combination of the two patches listed below triggers the behavior in
clang-13, but individually these commits are correct.
Link: https://lkml.kernel.org/r/20210225130153.1956990-1-arnd@kernel.org
Fixes: fe5595c07400 ("stop_machine: Provide stop_machine_cpuslocked()")
Fixes: ee527cd3a20c ("Use stop_machine_run in the Intel RNG driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
setting skb ownership
commit e940e0895a82c6fbaa259f2615eb52b57ee91a7e upstream.
There are two ref count variables controlling the free()ing of a socket:
- struct sock::sk_refcnt - which is changed by sock_hold()/sock_put()
- struct sock::sk_wmem_alloc - which accounts the memory allocated by
the skbs in the send path.
In case there are still TX skbs on the fly and the socket() is closed,
the struct sock::sk_refcnt reaches 0. In the TX-path the CAN stack
clones an "echo" skb, calls sock_hold() on the original socket and
references it. This produces the following back trace:
| WARNING: CPU: 0 PID: 280 at lib/refcount.c:25 refcount_warn_saturate+0x114/0x134
| refcount_t: addition on 0; use-after-free.
| Modules linked in: coda_vpu(E) v4l2_jpeg(E) videobuf2_vmalloc(E) imx_vdoa(E)
| CPU: 0 PID: 280 Comm: test_can.sh Tainted: G E 5.11.0-04577-gf8ff6603c617 #203
| Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
| Backtrace:
| [<80bafea4>] (dump_backtrace) from [<80bb0280>] (show_stack+0x20/0x24) r7:00000000 r6:600f0113 r5:00000000 r4:81441220
| [<80bb0260>] (show_stack) from [<80bb593c>] (dump_stack+0xa0/0xc8)
| [<80bb589c>] (dump_stack) from [<8012b268>] (__warn+0xd4/0x114) r9:00000019 r8:80f4a8c2 r7:83e4150c r6:00000000 r5:00000009 r4:80528f90
| [<8012b194>] (__warn) from [<80bb09c4>] (warn_slowpath_fmt+0x88/0xc8) r9:83f26400 r8:80f4a8d1 r7:00000009 r6:80528f90 r5:00000019 r4:80f4a8c2
| [<80bb0940>] (warn_slowpath_fmt) from [<80528f90>] (refcount_warn_saturate+0x114/0x134) r8:00000000 r7:00000000 r6:82b44000 r5:834e5600 r4:83f4d540
| [<80528e7c>] (refcount_warn_saturate) from [<8079a4c8>] (__refcount_add.constprop.0+0x4c/0x50)
| [<8079a47c>] (__refcount_add.constprop.0) from [<8079a57c>] (can_put_echo_skb+0xb0/0x13c)
| [<8079a4cc>] (can_put_echo_skb) from [<8079ba98>] (flexcan_start_xmit+0x1c4/0x230) r9:00000010 r8:83f48610 r7:0fdc0000 r6:0c080000 r5:82b44000 r4:834e5600
| [<8079b8d4>] (flexcan_start_xmit) from [<80969078>] (netdev_start_xmit+0x44/0x70) r9:814c0ba0 r8:80c8790c r7:00000000 r6:834e5600 r5:82b44000 r4:82ab1f00
| [<80969034>] (netdev_start_xmit) from [<809725a4>] (dev_hard_start_xmit+0x19c/0x318) r9:814c0ba0 r8:00000000 r7:82ab1f00 r6:82b44000 r5:00000000 r4:834e5600
| [<80972408>] (dev_hard_start_xmit) from [<809c6584>] (sch_direct_xmit+0xcc/0x264) r10:834e5600 r9:00000000 r8:00000000 r7:82b44000 r6:82ab1f00 r5:834e5600 r4:83f27400
| [<809c64b8>] (sch_direct_xmit) from [<809c6c0c>] (__qdisc_run+0x4f0/0x534)
To fix this problem, only set skb ownership to sockets which have still
a ref count > 0.
Fixes: 0ae89beb283a ("can: add destructor for self generated skbs")
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Andre Naujoks <nautsch2@gmail.com>
Link: https://lore.kernel.org/r/20210226092456.27126-1-o.rempel@pengutronix.de
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 924a9bc362a5223cd448ca08c3dde21235adc310 upstream.
For gso packets, virtio_net_hdr_set_proto sets the protocol (if it isn't
set) based on the type in the virtio net hdr, but the skb could contain
anything since it could come from packet_snd through a raw socket. If
there is a mismatch between what virtio_net_hdr_set_proto sets and
the actual protocol, then the skb could be handled incorrectly later
on.
An example where this poses an issue is with the subsequent call to
skb_flow_dissect_flow_keys_basic which relies on skb->protocol being set
correctly. A specially crafted packet could fool
skb_flow_dissect_flow_keys_basic preventing EINVAL to be returned.
Avoid blindly trusting the information provided by the virtio net header
by checking that the protocol in the packet actually matches the
protocol set by virtio_net_hdr_set_proto. Note that since the protocol
is only checked if skb->dev implements header_ops->parse_protocol,
packets from devices without the implementation are not checked at this
stage.
Fixes: 9274124f023b ("net: stricter validation of untrusted gso packets")
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e78b2915517e8fcadb1bc130ad6aeac7099e510c upstream.
Introduce a new optional header_ops callback called parse_protocol and a
wrapper function dev_parse_header_protocol, similar to dev_parse_header.
The new callback's purpose is to extract the protocol number from the L2
header, the format of which is known to the driver, but not to the upper
layers of the stack.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f6f1f8e6e3eea25f539105d48166e91f0ab46dd1 ]
A dummy zero bit is sent preceding the data during a read transfer by the
Microchip 93LC46B eeprom (section 2.7 of[1]). This results in right shift
of data during a read. In order to ignore this bit a quirk can be added to
send an extra zero bit after the read address.
Add a quirk to ignore the zero bit sent before data by adding a zero bit
after the read address.
[1] - https://www.mouser.com/datasheet/2/268/20001749K-277859.pdf
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210105105817.17644-3-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 2395928158059b8f9858365fce7713ce7fef62e4 upstream.
There exists multiple path may do zram compaction concurrently.
1. auto-compaction triggered during memory reclaim
2. userspace utils write zram<id>/compaction node
So, multiple threads may call zs_shrinker_scan/zs_compact concurrently.
But pages_compacted is a per zsmalloc pool variable and modification
of the variable is not serialized(through under class->lock).
There are two issues here:
1. the pages_compacted may not equal to total number of pages
freed(due to concurrently add).
2. zs_shrinker_scan may not return the correct number of pages
freed(issued by current shrinker).
The fix is simple:
1. account the number of pages freed in zs_compact locally.
2. use actomic variable pages_compacted to accumulate total number.
Link: https://lkml.kernel.org/r/20210202122235.26885-1-wu-yan@tcl.com
Fixes: 860c707dca155a56 ("zsmalloc: account the number of compacted pages")
Signed-off-by: Rokudo Yan <wu-yan@tcl.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2efc459d06f1630001e3984854848a5647086232 upstream.
Output defects can exist in sysfs content using sprintf and snprintf.
sprintf does not know the PAGE_SIZE maximum of the temporary buffer
used for outputting sysfs content and it's possible to overrun the
PAGE_SIZE buffer length.
Add a generic sysfs_emit function that knows that the size of the
temporary buffer and ensures that no overrun is done.
Add a generic sysfs_emit_at function that can be used in multiple
call situations that also ensures that no overrun is done.
Validate the output buffer argument to be page aligned.
Validate the offset len argument to be within the PAGE_SIZE buf.
Signed-off-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/r/884235202216d464d61ee975f7465332c86f76b2.1600285923.git.joe@perches.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ee576c47db60432c37e54b1e2b43a8ca6d3a8dca upstream.
The icmp{,v6}_send functions make all sorts of use of skb->cb, casting
it with IPCB or IP6CB, assuming the skb to have come directly from the
inet layer. But when the packet comes from the ndo layer, especially
when forwarded, there's no telling what might be in skb->cb at that
point. As a result, the icmp sending code risks reading bogus memory
contents, which can result in nasty stack overflows such as this one
reported by a user:
panic+0x108/0x2ea
__stack_chk_fail+0x14/0x20
__icmp_send+0x5bd/0x5c0
icmp_ndo_send+0x148/0x160
In icmp_send, skb->cb is cast with IPCB and an ip_options struct is read
from it. The optlen parameter there is of particular note, as it can
induce writes beyond bounds. There are quite a few ways that can happen
in __ip_options_echo. For example:
// sptr/skb are attacker-controlled skb bytes
sptr = skb_network_header(skb);
// dptr/dopt points to stack memory allocated by __icmp_send
dptr = dopt->__data;
// sopt is the corrupt skb->cb in question
if (sopt->rr) {
optlen = sptr[sopt->rr+1]; // corrupt skb->cb + skb->data
soffset = sptr[sopt->rr+2]; // corrupt skb->cb + skb->data
// this now writes potentially attacker-controlled data, over
// flowing the stack:
memcpy(dptr, sptr+sopt->rr, optlen);
}
In the icmpv6_send case, the story is similar, but not as dire, as only
IP6CB(skb)->iif and IP6CB(skb)->dsthao are used. The dsthao case is
worse than the iif case, but it is passed to ipv6_find_tlv, which does
a bit of bounds checking on the value.
This is easy to simulate by doing a `memset(skb->cb, 0x41,
sizeof(skb->cb));` before calling icmp{,v6}_ndo_send, and it's only by
good fortune and the rarity of icmp sending from that context that we've
avoided reports like this until now. For example, in KASAN:
BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xa0e/0x12b0
Write of size 38 at addr ffff888006f1f80e by task ping/89
CPU: 2 PID: 89 Comm: ping Not tainted 5.10.0-rc7-debug+ #5
Call Trace:
dump_stack+0x9a/0xcc
print_address_description.constprop.0+0x1a/0x160
__kasan_report.cold+0x20/0x38
kasan_report+0x32/0x40
check_memory_region+0x145/0x1a0
memcpy+0x39/0x60
__ip_options_echo+0xa0e/0x12b0
__icmp_send+0x744/0x1700
Actually, out of the 4 drivers that do this, only gtp zeroed the cb for
the v4 case, while the rest did not. So this commit actually removes the
gtp-specific zeroing, while putting the code where it belongs in the
shared infrastructure of icmp{,v6}_ndo_send.
This commit fixes the issue by passing an empty IPCB or IP6CB along to
the functions that actually do the work. For the icmp_send, this was
already trivial, thanks to __icmp_send providing the plumbing function.
For icmpv6_send, this required a tiny bit of refactoring to make it
behave like the v4 case, after which it was straight forward.
Fixes: a2b78e9b2cac ("sunvnet: generate ICMP PTMUD messages for smaller port MTUs")
Reported-by: SinYu <liuxyon@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/netdev/CAF=yD-LOF116aHub6RMe8vB8ZpnrrnoTdqhobEx+bvoA8AsP0w@mail.gmail.com/T/
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20210223131858.72082-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1faba27f11c8da244e793546a1b35a9b1da8208e upstream.
The W=1 compilation of allmodconfig generates the following warning:
net/ipv6/icmp.c:448:6: warning: no previous prototype for 'icmp6_send' [-Wmissing-prototypes]
448 | void icmp6_send(struct sk_buff *skb, u8 type, u8 code, __u32 info,
| ^~~~~~~~~~
Fix it by providing function declaration for builds with ipv6 as a module.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cc7a21b6fbd945f8d8f61422ccd27203c1fafeb7 upstream.
If IPv6 is builtin, we do not need an expensive indirect call
to reach icmp6_send().
v2: put inline keyword before the type to avoid sparse warnings.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a8e41f6033a0c5633d55d6e35993c9e2005d872f upstream.
The icmpv6_send function has long had a static inline implementation
with an empty body for CONFIG_IPV6=n, so that code calling it doesn't
need to be ifdef'd. The new icmpv6_ndo_send function, which is intended
for drivers as a drop-in replacement with an identical function
signature, should follow the same pattern. Without this patch, drivers
that used to work with CONFIG_IPV6=n now result in a linker error.
Cc: Chen Zhou <chenzhou10@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 0b41713b6066 ("icmp: introduce helper for nat'd source address in network device context")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0b41713b606694257b90d61ba7e2712d8457648b upstream.
This introduces a helper function to be called only by network drivers
that wraps calls to icmp[v6]_send in a conntrack transformation, in case
NAT has been used. We don't want to pollute the non-driver path, though,
so we introduce this as a helper to be called by places that actually
make use of this, as suggested by Florian.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5d5d19eda6b0ee790af89c45e3f678345be6f50f ]
For PMD-mapped page (usually THP), pvmw->pte is NULL. For PTE-mapped THP,
pvmw->pte is mapped. But for HugeTLB pages, pvmw->pte is not mapped and
set to the relevant page table entry. So in page_vma_mapped_walk_done(),
we may do pte_unmap() for HugeTLB pte which is not mapped. Fix this by
checking pvmw->page against PageHuge before trying to do pte_unmap().
Link: https://lkml.kernel.org/r/20210127093349.39081-1-linmiaohe@huawei.com
Fixes: ace71a19cec5 ("mm: introduce page_vma_mapped_walk()")
Signed-off-by: Hongxiang Lou <louhongxiang@huawei.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michel Lespinasse <walken@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Brian Geffon <bgeffon@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4993e1f9479a4161fd7d93e2b8b30b438f00cb0f ]
KEY_FLAG_KEEP is not meant to be passed to keyring_alloc() or key_alloc(),
as these only take KEY_ALLOC_* flags. KEY_FLAG_KEEP has the same value as
KEY_ALLOC_BYPASS_RESTRICTION, but fortunately only key_create_or_update()
uses it. LSMs using the key_alloc hook don't check that flag.
KEY_FLAG_KEEP is then ignored but fortunately (again) the root user cannot
write to the blacklist keyring, so it is not possible to remove a key/hash
from it.
Fix this by adding a KEY_ALLOC_SET_KEEP flag that tells key_alloc() to set
KEY_FLAG_KEEP on the new key. blacklist_init() can then, correctly, pass
this to keyring_alloc().
We can also use this in ima_mok_init() rather than setting the flag
manually.
Note that this doesn't fix an observable bug with the current
implementation but it is required to allow addition of new hashes to the
blacklist in the future without making it possible for them to be removed.
Fixes: 734114f8782f ("KEYS: Add a system blacklist keyring")
Reported-by: Mickaël Salaün <mic@linux.microsoft.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Mickaël Salaün <mic@linux.microsoft.com>
cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f31e3386a4e92ba6eda7328cb508462956c94c64 ]
IMA allocates kernel virtual memory to carry forward the measurement
list, from the current kernel to the next kernel on kexec system call,
in ima_add_kexec_buffer() function. This buffer is not freed before
completing the kexec system call resulting in memory leak.
Add ima_buffer field in "struct kimage" to store the virtual address
of the buffer allocated for the IMA measurement list.
Free the memory allocated for the IMA measurement list in
kimage_file_post_load_cleanup() function.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Fixes: 7b8589cc29e7 ("ima: on soft reboot, save the measurement list")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 3aa6bce9af0e25b735c9c1263739a5639a336ae8 upstream.
Prevent netif_tx_disable() running concurrently with dev_watchdog() by
taking the device global xmit lock. Otherwise, the recommended:
netif_carrier_off(dev);
netif_tx_disable(dev);
driver shutdown sequence can happen after the watchdog has already
checked carrier, resulting in possible false alarms. This is because
netif_tx_lock() only sets the frozen bit without maintaining the locks
on the individual queues.
Fixes: c3f26a269c24 ("netdev: Fix lockdep warnings in multiqueue configurations.")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 68f23b89067fdf187763e75a56087550624fdbee ]
Without memcg, there is a one-to-one mapping between the bdi and
bdi_writeback structures. In this world, things are fairly
straightforward; the first thing bdi_unregister() does is to shutdown
the bdi_writeback structure (or wb), and part of that writeback ensures
that no other work queued against the wb, and that the wb is fully
drained.
With memcg, however, there is a one-to-many relationship between the bdi
and bdi_writeback structures; that is, there are multiple wb objects
which can all point to a single bdi. There is a refcount which prevents
the bdi object from being released (and hence, unregistered). So in
theory, the bdi_unregister() *should* only get called once its refcount
goes to zero (bdi_put will drop the refcount, and when it is zero,
release_bdi gets called, which calls bdi_unregister).
Unfortunately, del_gendisk() in block/gen_hd.c never got the memo about
the Brave New memcg World, and calls bdi_unregister directly. It does
this without informing the file system, or the memcg code, or anything
else. This causes the root wb associated with the bdi to be
unregistered, but none of the memcg-specific wb's are shutdown. So when
one of these wb's are woken up to do delayed work, they try to
dereference their wb->bdi->dev to fetch the device name, but
unfortunately bdi->dev is now NULL, thanks to the bdi_unregister()
called by del_gendisk(). As a result, *boom*.
Fortunately, it looks like the rest of the writeback path is perfectly
happy with bdi->dev and bdi->owner being NULL, so the simplest fix is to
create a bdi_dev_name() function which can handle bdi->dev being NULL.
This also allows us to bulletproof the writeback tracepoints to prevent
them from dereferencing a NULL pointer and crashing the kernel if one is
tracing with memcg's enabled, and an iSCSI device dies or a USB storage
stick is pulled.
The most common way of triggering this will be hotremoval of a device
while writeback with memcg enabled is going on. It was triggering
several times a day in a heavily loaded production environment.
Google Bug Id: 145475544
Link: https://lore.kernel.org/r/20191227194829.150110-1-tytso@mit.edu
Link: http://lkml.kernel.org/r/20191228005211.163952-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Chris Mason <clm@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 458a3bf82df4fe1f951d0f52b1e0c1e9d5a88a3b ]
We have a function to copy strings safely and we have a function to copy
strings and zero the tail of the destination (if source string is
shorter than destination buffer) but we do not have a function to do
both at once. This means developers must write this themselves if they
desire this functionality. This is a chore, and also leaves us open to
off by one errors unnecessarily.
Add a function that calls strscpy() then memset()s the tail to zero if
the source string is shorter than the destination buffer.
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ba6dfce47c4d002d96cd02a304132fca76981172 ]
Remove duplicated helper functions to parse opaque XDR objects
and place inside new file net/sunrpc/auth_gss/auth_gss_internal.h.
In the new file carry the license and copyright from the source file
net/sunrpc/auth_gss/auth_gss.c. Finally, update the comment inside
include/linux/sunrpc/xdr.h since lockd is not the only user of
struct xdr_netobj.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 7e0a9220467dbcfdc5bc62825724f3e52e50ab31 upstream.
On some archs, the idle task can call into cpu_suspend(). The cpu_suspend()
will disable or pause function graph tracing, as there's some paths in
bringing down the CPU that can have issues with its return address being
modified. The task_struct structure has a "tracing_graph_pause" atomic
counter, that when set to something other than zero, the function graph
tracer will not modify the return address.
The problem is that the tracing_graph_pause counter is initialized when the
function graph tracer is enabled. This can corrupt the counter for the idle
task if it is suspended in these architectures.
CPU 1 CPU 2
----- -----
do_idle()
cpu_suspend()
pause_graph_tracing()
task_struct->tracing_graph_pause++ (0 -> 1)
start_graph_tracing()
for_each_online_cpu(cpu) {
ftrace_graph_init_idle_task(cpu)
task-struct->tracing_graph_pause = 0 (1 -> 0)
unpause_graph_tracing()
task_struct->tracing_graph_pause-- (0 -> -1)
The above should have gone from 1 to zero, and enabled function graph
tracing again. But instead, it is set to -1, which keeps it disabled.
There's no reason that the field tracing_graph_pause on the task_struct can
not be initialized at boot up.
Cc: stable@vger.kernel.org
Fixes: 380c4b1411ccd ("tracing/function-graph-tracer: append the tracing_graph_flag")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=211339
Reported-by: pierre.gondois@arm.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 585fc0d2871c9318c949fbf45b1f081edd489e96 upstream.
If a new hugetlb page is allocated during fallocate it will not be
marked as active (set_page_huge_active) which will result in a later
isolate_huge_page failure when the page migration code would like to
move that page. Such a failure would be unexpected and wrong.
Only export set_page_huge_active, just leave clear_page_huge_active as
static. Because there are no external users.
Link: https://lkml.kernel.org/r/20210115124942.46403-3-songmuchun@bytedance.com
Fixes: 70c3547e36f5 (hugetlbfs: add hugetlbfs_fallocate())
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6e7b64b9dd6d96537d816ea07ec26b7dedd397b9 upstream.
kernel/elfcore.c only contains weak symbols, which triggers a bug with
clang in combination with recordmcount:
Cannot find symbol for section 2: .text.
kernel/elfcore.o: failed
Move the empty stubs into linux/elfcore.h as inline functions. As only
two architectures use these, just use the architecture specific Kconfig
symbols to key off the declaration.
Link: https://lkml.kernel.org/r/20201204165742.3815221-2-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Barret Rhoden <brho@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ac687e6e8c26181a33270efd1a2e2241377924b0 ]
There is a need to distinguish geniune per-cpu kthreads from kthreads
that happen to have a single CPU affinity.
Geniune per-cpu kthreads are kthreads that are CPU affine for
correctness, these will obviously have PF_KTHREAD set, but must also
have PF_NO_SETAFFINITY set, lest userspace modify their affinity and
ruins things.
However, these two things are not sufficient, PF_NO_SETAFFINITY is
also set on other tasks that have their affinities controlled through
other means, like for instance workqueues.
Therefore another bit is needed; it turns out kthread_create_per_cpu()
already has such a bit: KTHREAD_IS_PER_CPU, which is used to make
kthread_park()/kthread_unpark() work correctly.
Expose this flag and remove the implicit setting of it from
kthread_create_on_cpu(); the io_uring usage of it seems dubious at
best.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103506.557620262@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 9def3b1a07c41e21c68a0eb353e3e569fdd1d2b1 upstream.
Since commit c40aaaac1018 ("iommu/vt-d: Gracefully handle DMAR units
with no supported address widths") dmar.c needs struct iommu_device to
be selected. We can drop this dependency by not dereferencing struct
iommu_device if IOMMU_API is not selected and by reusing the information
stored in iommu->drhd->ignored instead.
This fixes the following build error when IOMMU_API is not selected:
drivers/iommu/dmar.c: In function ‘free_iommu’:
drivers/iommu/dmar.c:1139:41: error: ‘struct iommu_device’ has no member named ‘ops’
1139 | if (intel_iommu_enabled && iommu->iommu.ops) {
^
Fixes: c40aaaac1018 ("iommu/vt-d: Gracefully handle DMAR units with no supported address widths")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20201013073055.11262-1-brgl@bgdev.pl
Signed-off-by: Joerg Roedel <jroedel@suse.de>
[ - context change due to moving drivers/iommu/dmar.c to
drivers/iommu/intel/dmar.c
- set the drhr in the iommu like in upstream commit b1012ca8dc4f
("iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu") ]
Signed-off-by: Filippo Sironi <sironi@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5fcd57505c002efc5823a7355e21f48dd02d5a51 upstream.
The only use of I_DIRTY_TIME_EXPIRE is to detect in
__writeback_single_inode() that inode got there because flush worker
decided it's time to writeback the dirty inode time stamps (either
because we are syncing or because of age). However we can detect this
directly in __writeback_single_inode() and there's no need for the
strange propagation with I_DIRTY_TIME_EXPIRE flag.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0e11f6443f522f89509495b13ef1f3745640144d upstream.
And use it in a few more places rather than opencoding the values.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dca5244d2f5b94f1809f0c02a549edf41ccd5493 upstream.
GCC versions >= 4.9 and < 5.1 have been shown to emit memory references
beyond the stack pointer, resulting in memory corruption if an interrupt
is taken after the stack pointer has been adjusted but before the
reference has been executed. This leads to subtle, infrequent data
corruption such as the EXT4 problems reported by Russell King at the
link below.
Life is too short for buggy compilers, so raise the minimum GCC version
required by arm64 to 5.1.
Reported-by: Russell King <linux@armlinux.org.uk>
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20210105154726.GD1551@shell.armlinux.org.uk
Link: https://lore.kernel.org/r/20210112224832.10980-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[will: backport to 4.4.y/4.9.y/4.14.y; add __clang__ check]
Link: https://lore.kernel.org/r/CA+G9fYuzE9WMSB7uGjV4gTzK510SHEdJb_UXQCzsQ5MqA=h9SA@mail.gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5eee7bd7e245914e4e050c413dfe864e31805207 upstream.
This worked before, because we made all callers name their next pointer
"next". But in trying to be more "drop-in" ready, the silliness here is
revealed. This commit fixes the problem by making the macro argument and
the member use different names.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dcfea72e79b0aa7a057c8f6024169d86a1bbc84b upstream.
As part of the continual effort to remove direct usage of skb->next and
skb->prev, this patch adds a helper for iterating through the
singly-linked variant of skb lists, which are used for lists of GSO
packet. The name "skb_list_..." has been chosen to match the existing
function, "kfree_skb_list, which also operates on these singly-linked
lists, and the "..._walk_safe" part is the same idiom as elsewhere in
the kernel.
This patch removes the helper from wireguard and puts it into
linux/skbuff.h, while making it a bit more robust for general usage. In
particular, parenthesis are added around the macro argument usage, and it
now accounts for trying to iterate through an already-null skb pointer,
which will simply run the iteration zero times. This latter enhancement
means it can be used to replace both do { ... } while and while (...)
open-coded idioms.
This should take care of these three possible usages, which match all
current methods of iterations.
skb_list_walk_safe(segs, skb, next) { ... }
skb_list_walk_safe(skb, skb, next) { ... }
skb_list_walk_safe(segs, skb, segs) { ... }
Gcc appears to generate efficient code for each of these.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[ Just the skbuff.h changes for backporting - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 22f6bbb7bcfcef0b373b0502a7ff390275c575dd ]
list_del() leaves the skb->next pointer poisoned, which can then lead to
a crash in e.g. OVS forwarding. For example, setting up an OVS VXLAN
forwarding bridge on sfc as per:
========
$ ovs-vsctl show
5dfd9c47-f04b-4aaa-aa96-4fbb0a522a30
Bridge "br0"
Port "br0"
Interface "br0"
type: internal
Port "enp6s0f0"
Interface "enp6s0f0"
Port "vxlan0"
Interface "vxlan0"
type: vxlan
options: {key="1", local_ip="10.0.0.5", remote_ip="10.0.0.4"}
ovs_version: "2.5.0"
========
(where 10.0.0.5 is an address on enp6s0f1)
and sending traffic across it will lead to the following panic:
========
general protection fault: 0000 [#1] SMP PTI
CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.20.0-rc3-ehc+ #701
Hardware name: Dell Inc. PowerEdge R710/0M233H, BIOS 6.4.0 07/23/2013
RIP: 0010:dev_hard_start_xmit+0x38/0x200
Code: 53 48 89 fb 48 83 ec 20 48 85 ff 48 89 54 24 08 48 89 4c 24 18 0f 84 ab 01 00 00 48 8d 86 90 00 00 00 48 89 f5 48 89 44 24 10 <4c> 8b 33 48 c7 03 00 00 00 00 48 8b 05 c7 d1 b3 00 4d 85 f6 0f 95
RSP: 0018:ffff888627b437e0 EFLAGS: 00010202
RAX: 0000000000000000 RBX: dead000000000100 RCX: ffff88862279c000
RDX: ffff888614a342c0 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff888618a88000 R08: 0000000000000001 R09: 00000000000003e8
R10: 0000000000000000 R11: ffff888614a34140 R12: 0000000000000000
R13: 0000000000000062 R14: dead000000000100 R15: ffff888616430000
FS: 0000000000000000(0000) GS:ffff888627b40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6d2bc6d000 CR3: 000000000200a000 CR4: 00000000000006e0
Call Trace:
<IRQ>
__dev_queue_xmit+0x623/0x870
? masked_flow_lookup+0xf7/0x220 [openvswitch]
? ep_poll_callback+0x101/0x310
do_execute_actions+0xaba/0xaf0 [openvswitch]
? __wake_up_common+0x8a/0x150
? __wake_up_common_lock+0x87/0xc0
? queue_userspace_packet+0x31c/0x5b0 [openvswitch]
ovs_execute_actions+0x47/0x120 [openvswitch]
ovs_dp_process_packet+0x7d/0x110 [openvswitch]
ovs_vport_receive+0x6e/0xd0 [openvswitch]
? dst_alloc+0x64/0x90
? rt_dst_alloc+0x50/0xd0
? ip_route_input_slow+0x19a/0x9a0
? __udp_enqueue_schedule_skb+0x198/0x1b0
? __udp4_lib_rcv+0x856/0xa30
? __udp4_lib_rcv+0x856/0xa30
? cpumask_next_and+0x19/0x20
? find_busiest_group+0x12d/0xcd0
netdev_frame_hook+0xce/0x150 [openvswitch]
__netif_receive_skb_core+0x205/0xae0
__netif_receive_skb_list_core+0x11e/0x220
netif_receive_skb_list+0x203/0x460
? __efx_rx_packet+0x335/0x5e0 [sfc]
efx_poll+0x182/0x320 [sfc]
net_rx_action+0x294/0x3c0
__do_softirq+0xca/0x297
irq_exit+0xa6/0xb0
do_IRQ+0x54/0xd0
common_interrupt+0xf/0xf
</IRQ>
========
So, in all listified-receive handling, instead pull skbs off the lists with
skb_list_del_init().
Fixes: 9af86f933894 ("net: core: fix use-after-free in __netif_receive_skb_list_core")
Fixes: 7da517a3bc52 ("net: core: Another step of skb receive list processing")
Fixes: a4ca8b7df73c ("net: ipv4: fix drop handling in ip_list_rcv() and ip_list_rcv_finish()")
Fixes: d8269e2cbf90 ("net: ipv6: listify ipv6_rcv() and ip6_rcv_finish()")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[ for 4.14.y and older, just take the skbuff.h change - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ee61cfd955a64a58ed35cbcfc54068fcbd486945 ]
It adds a stub acpi_create_platform_device() for !CONFIG_ACPI build, so
that caller doesn't have to deal with !CONFIG_ACPI build issue.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit aa8c7db494d0a83ecae583aa193f1134ef25d506 upstream.
Silly GCC doesn't always inline these trivial functions.
Fixes the following warning:
arch/x86/kernel/sys_ia32.o: warning: objtool: cp_stat64()+0xd8: call to new_encode_dev() with UACCESS enabled
Link: https://lkml.kernel.org/r/984353b44a4484d86ba9f73884b7306232e25e30.1608737428.git.jpoimboe@redhat.com
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> [build-tested]
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5812b32e01c6d86ba7a84110702b46d8a8531fe9 upstream.
Specify type alignment when declaring linker-section match-table entries
to prevent gcc from increasing alignment and corrupting the various
tables with padding (e.g. timers, irqchips, clocks, reserved memory).
This is specifically needed on x86 where gcc (typically) aligns larger
objects like struct of_device_id with static extent on 32-byte
boundaries which at best prevents matching on anything but the first
entry. Specifying alignment when declaring variables suppresses this
optimisation.
Here's a 64-bit example where all entries are corrupt as 16 bytes of
padding has been inserted before the first entry:
ffffffff8266b4b0 D __clk_of_table
ffffffff8266b4c0 d __of_table_fixed_factor_clk
ffffffff8266b5a0 d __of_table_fixed_clk
ffffffff8266b680 d __clk_of_table_sentinel
And here's a 32-bit example where the 8-byte-aligned table happens to be
placed on a 32-byte boundary so that all but the first entry are corrupt
due to the 28 bytes of padding inserted between entries:
812b3ec0 D __irqchip_of_table
812b3ec0 d __of_table_irqchip1
812b3fa0 d __of_table_irqchip2
812b4080 d __of_table_irqchip3
812b4160 d irqchip_of_match_end
Verified on x86 using gcc-9.3 and gcc-4.9 (which uses 64-byte
alignment), and on arm using gcc-7.2.
Note that there are no in-tree users of these tables on x86 currently
(even if they are included in the image).
Fixes: 54196ccbe0ba ("of: consolidate linker section OF match table declarations")
Fixes: f6e916b82022 ("irqchip: add basic infrastructure")
Cc: stable <stable@vger.kernel.org> # 3.9
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20201123102319.8090-2-johan@kernel.org
[ johan: adjust context to 5.4 ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a983b5ebee57209c99f68c8327072f25e0e6e3da upstream
We've seen memory.stat reads in top-level cgroups take up to fourteen
seconds during a userspace bug that created tens of thousands of ghost
cgroups pinned by lingering page cache.
Even with a more reasonable number of cgroups, aggregating memory.stat
is unnecessarily heavy. The complexity is this:
nr_cgroups * nr_stat_items * nr_possible_cpus
where the stat items are ~70 at this point. With 128 cgroups and 128
CPUs - decent, not enormous setups - reading the top-level memory.stat
has to aggregate over a million per-cpu counters. This doesn't scale.
Instead of spreading the source of truth across all CPUs, use the
per-cpu counters merely to batch updates to shared atomic counters.
This is the same as the per-cpu stocks we use for charging memory to the
shared atomic page_counters, and also the way the global vmstat counters
are implemented.
Vmstat has elaborate spilling thresholds that depend on the number of
CPUs, amount of memory, and memory pressure - carefully balancing the
cost of counter updates with the amount of per-cpu error. That's
because the vmstat counters are system-wide, but also used for decisions
inside the kernel (e.g. NR_FREE_PAGES in the allocator). Neither is
true for the memory controller.
Use the same static batch size we already use for page_counter updates
during charging. The per-cpu error in the stats will be 128k, which is
an acceptable ratio of cores to memory accounting granularity.
[hannes@cmpxchg.org: fix warning in __this_cpu_xchg() calls]
Link: http://lkml.kernel.org/r/20171201135750.GB8097@cmpxchg.org
Link: http://lkml.kernel.org/r/20171103153336.24044-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
[shaoyi@amazon.com: resolved the conflict brought by commit 17ffa29c355658c8e9b19f56cbf0388500ca7905 in mm/memcontrol.c by contextual fix]
Signed-off-by: Shaoying Xu <shaoyi@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 284542656e22c43fdada8c8cc0ca9ede8453eed7 upstream
The implementation of the lruvec stat functions and their variants for
accounting through a page, or accounting from a preemptible context, are
mostly identical and needlessly repetitive.
Implement the lruvec_page functions by looking up the page's lruvec and
then using the lruvec function.
Implement the functions for preemptible contexts by disabling preemption
before calling the atomic context functions.
Link: http://lkml.kernel.org/r/20171103153336.24044-2-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Shaoying Xu <shaoyi@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c9019e9bf42e66d028d70d2da6206cad4dd9250d upstream
Replace all raw 'this_cpu_' modifications of the stat and event per-cpu
counters with API functions such as mod_memcg_state().
This makes the code easier to read, but is also in preparation for the
next patch, which changes the per-cpu implementation of those counters.
Link: http://lkml.kernel.org/r/20171103153336.24044-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shaoying Xu <shaoyi@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
